Time-resolved Probe Research Articles

XAS/DRIFTS/MS spectroscopy for time-resolved operando investigations at high temperature.

The combination of complementary techniques in the characterization of catalysts under working conditions is a very powerful tool for an accurate and in-depth comprehension of the system investigated. In particular, X-ray absorption spectroscopy (XAS) coupled with diffuse reflectance infrared Fourier transform spectroscopy (DRIFTS) and mass spectroscopy (MS) is a powerful combination since XAS characterizes the main elements of the catalytic system (selecting the absorption edge) and DRIFTS monitors surface adsorbates while MS enables product identification and quantification. In the present manuscript, a new reactor cell and an experimental setup optimized to perform time-resolved experiments on heterogeneous catalysts under working conditions are reported. A key feature of this setup is the possibility to work at high temperature and pressure, with a small cell dead volume. To demonstrate these capabilities, performance tests with and without X-rays are performed. The effective temperature at the sample surface, the speed to purge the gas volume inside the cell and catalytic activity have been evaluated to demonstrate the reliability and usefulness of the cell. The setup capability of combining XAS, DRIFTS and MS spectroscopies is demonstrated in a time-resolved experiment, following the reduction of NO by Rh nanoparticles supported on alumina.

Evidence for topological defects in a photoinduced phase transition

Upon excitation with an intense ultrafast laser pulse, a symmetry-broken ground state can undergo a non-equilibrium phase transition through pathways dissimilar from those in thermal equilibrium. Determining the mechanism underlying these photo-induced phase transitions (PIPTs) has been a long-standing issue in the study of condensed matter systems. To this end, we investigate the light-induced melting of a unidirectional charge density wave (CDW) material, LaTe$_3$. Using a suite of time-resolved probes, we independently track the amplitude and phase dynamics of the CDW. We find that a quick ($\sim\,$1$\,$ps) recovery of the CDW amplitude is followed by a slower reestablishment of phase coherence. This longer timescale is dictated by the presence of topological defects: long-range order (LRO) is inhibited and is only restored when the defects annihilate. Our results provide a framework for understanding other PIPTs by identifying the generation of defects as a governing mechanism.

Unraveling the Photodeprotection Mechanism of Anthraquinon-2-ylmethoxycarbonyl-Caged Alcohols Using Time-Resolved Spectroscopy.

Anthraquinone (AQ) compounds have been used as photolabile protecting groups (PPGs) to protect alcohols, ketones, and carboxylic acids. However, because of the lack of direct spectroscopic information for the transient species and intermediates related with the deprotection reaction(s), the photorelease mechanism(s) of these systems are still largely unknown. In this contribution, we detail a time-resolved spectroscopic investigation using anthraquinone-protected galactose (1) and adenosine (2) to investigate the photodeprotection reaction mechanism(s) of these kinds of AQ-PPGs. It was found that, in THF-H2O solvents, the ketyl radical species generated for 1 and 2 was found to be a reactive intermediate that then formed a dihydroxyanthracene species. The photodeprotection then occurred with the accompaniment of a decarboxylation process. These results provide an improved understanding for how AQ-PPGs work and will help assist in the design and applications of selected anthraquinone derivatives as a PPG platform, especially in aqueous environments more relevant for use in biological systems.

Photoinduced Energy Transfer in ZnCdSeS Quantum Dot-Phthalocyanines Hybrids.

In this article, interaction between ZnCdSeS quantum dot (QD) and phthalocyanines with variable linker has been reported. Steady-state and time-resolved spectroscopic investigation reveals that only photoinduced energy transfer occurs from QD to phthalocyanines. To evaluate quantitatively the energy transfer, the Poisson statistics of QD–dye complex formation was used in the analysis of steady-state and time-resolved emission quenching, which allows to estimate the energy transfer rate constant for an ideal one-to-one complex. The measured rate constants are compared to the rates evaluated based on the classic Förster theory, which shows roughly 1 nm discrepancy in the energy transfer distance estimation, or one order in magnitude discrepancy in the transfer rate constants.

Processing and Investigation Methods in Mechanochemical Kinetics.

The present work focuses on the challenges that emerge in connection with the kinetics of mechanically activated transformations. This is an important topics to comprehend to enable the full exploitation of mechanical processing in a broad spectrum of areas related to chemistry and materials science and engineering. Emerging challenges involve a number of facets regarding materials and material properties, working principles of ball mills and milling conditions, and local changes occurring in series in processed materials. Within this context, it is highly desirable to relate the nature and rate of observed mechanochemical transformations to individual collisions and then to the processes induced by mechanical stresses on the molecular scale. Hence, it is necessary to characterize the milling regimes that can establish in ball mills regarding frequency and energy of collisions, map the relationship between milling dynamics and transformation kinetics, and obtain mechanistic information through proper time-resolved investigations in situ. A few specific hints are provided in this respect.

Time-resolved electron spectroscopy for chemical analysis of photodissociation: Photoelectron spectra of Fe(CO)5, Fe(CO)4, and Fe(CO)3.

The prototypical photoinduced dissociation of Fe(CO)5 in the gas phase is used to test time-resolved x-ray photoelectron spectroscopy for studying photochemical reactions. Upon one-photon excitation at 266 nm, Fe(CO)5 successively dissociates to Fe(CO)4 and Fe(CO)3 along a pathway where both fragments retain the singlet multiplicity of Fe(CO)5. The x-ray free-electron laser FLASH is used to probe the reaction intermediates Fe(CO)4 and Fe(CO)3 with time-resolved valence and core-level photoelectron spectroscopy, and experimental results are interpreted with ab initio quantum chemical calculations. Changes in the valence photoelectron spectra are shown to reflect changes in the valence-orbital interactions upon Fe-CO dissociation, thereby validating fundamental theoretical concepts in Fe-CO bonding. Chemical shifts of CO 3σ inner-valence and Fe 3p core-level binding energies are shown to correlate with changes in the coordination number of the Fe center. We interpret this with coordination-dependent charge localization and core-hole screening based on calculated changes in electron densities upon core-hole creation in the final ionic states. This extends the established capabilities of steady-state electron spectroscopy for chemical analysis to time-resolved investigations. It could also serve as a benchmark for how charge and spin density changes in molecular dissociation and excited-state dynamics are expressed in valence and core-level photoelectron spectroscopy.

Elucidating uranium monoxide spectral features from a laser-produced plasma.

Uranium, because of its pyrophoricity, oxidizes rapidly in an oxygen-containing high-temperature environment. However, so far, the identification of uranium oxide (UO) emission from a laser-produced plasma system is limited to a spectral feature around 593.55 nm. The aim of this study is to elucidate UO emission features in the visible spectral regime from uranium plasmas generated in an environment with varying oxygen concentrations. The plasmas are produced by focusing nanosecond laser pulses on a uranium metal target in a controlled ambient environment. Space- and time-resolved optical emission spectroscopic investigations are used for isolating UO molecular emission structures from crowded U atomic line emission. Our studies highlight that the emission from a U plasma, even in the presence of trace oxygen is accompanied by a strong background-like emission with partially resolved bands from uranium monoxide and higher oxides. We also report several UO spectral emission bands in the visible spectral region.

Enhanced electroluminescence from n-ZnO NCs/n-Si isotype heterojunctions by using i-NiO as electron blocking layer

Solution-processed n-ZnO nanocrystals (NCs)/n-Si isotype heterojunction light-emitting diodes (LEDs) were fabricated and characterized. Electroluminescence (EL) of the n-ZnO NCs/n-Si LEDs was drastically boosted more than fivefold by introducing an effective i-NiO electron blocking layer (EBL). Peak deconvolution results suggested that the green and orange emissions related to oxygen defects in ZnO NCs were enhanced so significantly that the emission color was tuned from bluish green toward greenish yellow. Photoluminescence (PL) and time-resolved PL investigations revealed that i-NiO can also act as a superior hole transport layer to reduce the carrier lifetime from 0.354 to 0.307 ns. Our results show the great potential of utilizing i-NiO as an effective EBL to fabricate printed optoelectronic devices based on solution-processed n-ZnO NCs/Si heterojunctions.

In situ monitoring and analysis of enamel demineralisation using synchrotron X-ray scattering

Dental caries is one of the most common chronic diseases that affect human teeth. It often initiates in enamel, undermining its mechanical function and structural integrity. Little is known about the enamel demineralisation process caused by dental caries in terms of the microstructural changes and crystallography of the inorganic mineral phase. To improve the understanding of the carious lesion formation process and to help identify efficient treatments, the evolution of the microstructure at the nano-scale in an artificially induced enamel erosion region was probed using advanced synchrotron small-angle and wide-angle X-ray scattering (SAXS and WAXS). This is the first in vitro and time-resolved investigation of enamel demineralisation using synchrotron X-ray techniques which allows in situ quantification of the microstructure evolution over time in a simulated carious lesion. The analysis revealed that alongside the reduction of mineral volume, a heterogeneous evolution of hydroxyapatite (HAp) crystallites (in terms of size, preferred orientation and degree of alignment) could be observed. It was also found that the rate and direction of dissolution depends on the crystallographic orientation. Based on these findings, a novel conceptual view of the process is put forward that describes the key structural parameters in establishing high fidelity ultrastructure-based numerical models for the simulation of the enamel demineralisation process. Statement of significanceHydroxyapatite (HAp) crystallites in the enamel dissolve during dental caries although little is known about the structural-chemical relationships that control the dynamic demineralisation process. For the first time this work investigated the in situ evolution of nano-scale morphology and the spatial distribution of ultrastructural HAp crystallites of human enamel during demineralisation in simulated caries. Advanced synchrotron SAXS and WAXS techniques showed that the heterogeneous evolution of crystallites (size, preferred orientation and degree of alignment) could be attributed to crystallographic-orientation-dependent anisotropic dissolution. Hence we propose a novel conceptual schematic diagram to describe the demineralisation process. These findings have important implications for understanding the detailed mechanisms of enamel demineralisation and provide insight into potential enamel remineralisation that could restore structural integrity and function.

Laser-induced linear and non-linear optical features in novel benzoxazole-based on donor-acceptor chromophores

The photophysical properties of donor-acceptor based benzoxazoles were investigated by means of steady-state and time-resolved fluorescence techniques. Additionally, laser stimulated second-order optical effects (preliminary second harmonic generation (SHG) were studied. The studies show that the nitro-benzoxazole derivatives decorated with different alkylo/arylo amino groups dissolved in medium polar aprotic solvents: tetrahydrofuran and butyl chloride, exhibit dual fluorescence from the locally excited state (1LE) and a highly polar charge transfer (CT) state. Ambient-temperature time-resolved fluorescence investigations prove the bimodal kinetics of the excited-state electron transfer reaction 1LE→1CT. The lack of any CT emissions in cyclohexane and highly polar acetonitrile is presumably due to an efficient inter-system crossing process or fast deactivation of a low-lying CT state. In addition, strong CT properties inspired us to check a possibility to vary the absorption of the first UV–Vis maxima under influence of the external bicolour coherent laser light and the related optical second harmonic generation (SHG). The two coherent beams of the infrared Er:glass laser at 1540 nm/770 nm formed gratings in the photopolymer solidified chromophore. The performed experiments are compared with the theoretically calculated electronic parameters within the B3LYP DFT approach. The presented data open novel type of materials, allowing to operate its transparency using external IR laser light in the near IR spectral range.

Optical free-carrier generation in silicon nano-waveguides at 1550 nm

We report on time-resolved pump and probe characterization of linear and nonlinear optical generation of free carriers in a silicon strip nano-waveguide at the 1550 nm communication band. Analytical expressions were developed to extract the carrier density averaged along the waveguide length from the measured free-carrier absorption for different input pump power levels. This allows us to discriminate the contributions from two-photon absorption (TPA) and single-photon absorption (SPA), obtaining TPA and SPA coefficients of (1.5 ± 0.1) cm/GW and (1.9 ± 0.1) m−1, respectively. Our results reveal that the effective TPA within the waveguide is higher than the value reported for bulk silicon. In addition, we find that for the waveguide under test, the carrier generation via SPA plays an important role up to ∼300 mW, and therefore, it must be taken into account to correctly assess free-carrier effects in silicon photonic devices.

Improving the quality of XAFS data.

Following the Q2XAFS Workshop and Satellite to IUCr Congress 2017 on `Data Acquisition, Treatment, Storage - quality assurance in XAFS spectroscopy', a summary is given of the discussion on different aspects of a XAFS experiment that affect data quality. Some pertinent problems ranging from sources and minimization of noise to harmonic contamination and uncompensated monochromator glitches were addressed. Also, an overview is given of the major limitations and pitfalls of a selection of related methods, such as photon-out spectroscopies and energy-dispersive XAFS, and of increasingly common applications, namely studies at high pressure, and time-resolved investigations of catalysts in operando. Advice on how to avoid or deal with these problems and a few good practice recommendations are reported, including how to correctly report results.

Direct Observation and Quantitative Analysis of Mobile Frenkel Defects in Metal Halide Perovskites Using Scanning Kelvin Probe Microscopy

Ion migration is seen as a primary stability concern of halide perovskite-based photovoltaic and optoelectronic devices. Here, we provide experimental studies of long-distance, reversible ion migration in methylammonium lead iodide (MAPbI3) and formamidinium lead iodide (FAPbI3) films. We use time-resolved scanning Kelvin probe microscopy on insulator-coated lateral electrodes to probe the dynamic redistribution of charged Frenkel defects over micrometer distances after application of an electric field. We combine these dynamic measurements with drift–diffusion simulations that yield self-consistent pictures of the sign, distribution, mobility, and activation energy of the associated, mobile Frenkel defects. This comprehensive approach is applied to study the impact of an organic cation on ionic mobility in metal halide perovskites, which we find to be significantly reduced in the case of FAPbI3 films compared to MAPbI3 films.

Time-Resolved Gas-Phase Kinetic Study of SiD2 + C2H4.

Time-resolved investigation of deuterium-substituted silylene (SiD2) generated by laser flash photolysis of deuterium-substituted phenylsilane (PhSiD3) was carried out to obtain rate constants for its bimolecular reaction with ethylene (C2H4). The reaction was studied in the gas phase over the pressure range of 1-100 Torr (in SF6 bath gas) at 295 K. The rate constants for SiD2 + C2H4 were found to be independent of pressure and close in magnitude to the rate constants for the reaction of SiH2 + C2H4 at the high-pressure limit. They are consistent with a rapid isotopic scrambling mechanism similar to that of SiH2 + C2D4. While silirane, the main product produced from this reaction, was too labile to be detected, vinylsilane, another possible product, was ruled out by gas chromatography analysis. This reaction shows similarities to those of SiH2 + H2 and its isotopic counterparts.

Artifacts in time-resolved Kelvin probe force microscopy.

Kelvin probe force microscopy (KPFM) has been used for the characterization of metals, insulators, and semiconducting materials on the nanometer scale. Especially in semiconductors, the charge dynamics are of high interest. Recently, several techniques for time-resolved measurements with time resolution down to picoseconds have been developed, many times using a modulated excitation signal, e.g., light modulation or bias modulation that induces changes in the charge carrier distribution. For fast modulation frequencies, the KPFM controller measures an average surface potential, which contains information about the involved charge carrier dynamics. Here, we show that such measurements are prone to artifacts due to frequency mixing, by performing numerical dynamics simulations of the cantilever oscillation in KPFM subjected to a bias-modulated signal. For square bias pulses, the resulting time-dependent electrostatic forces are very complex and result in intricate mixing of frequencies that may, in some cases, have a component at the detection frequency, leading to falsified KPFM measurements. Additionally, we performed fast Fourier transform (FFT) analyses that match the results of the numerical dynamics simulations. Small differences are observed that can be attributed to transients and higher-order Fourier components, as a consequence of the intricate nature of the cantilever driving forces. These results are corroborated by experimental measurements on a model system. In the experimental case, additional artifacts are observed due to constructive or destructive interference of the bias modulation with the cantilever oscillation. Also, in the case of light modulation, we demonstrate artifacts due to unwanted illumination of the photodetector of the beam deflection detection system. Finally, guidelines for avoiding such artifacts are given.

Surface plasma attosource beamlines at ELI-ALPS

ELI-ALPS, one of the three pillars of the Extreme Light Infrastructure (ELI) project, will be in a unique position to offer dedicated experimental platforms for ultrashort time-resolved investigations of strongly excited dynamical systems. The state-of-the-art surface plasma attosource (SPA) beamlines at ELI-ALPS are being designed and developed to enable new directions in plasma-based attoscience research. The SPA beamlines will be driven by ultrashort, high peak power, high repetition rate lasers based on the latest technology and are aimed to develop previously unavailable attoscience experimental platforms employing surface high-harmonic generation process. This endeavor involves research and development challenges and careful considerations. Here we discuss the physics of plasma attosources and their characteristics under such extreme conditions and the beamline functionalities that would facilitate these objectives. Finally, we delineate the initial research possibilities with these sophisticated instruments. (C) 2018 Optical Society of America

Monitoring dynamic electrochemical processes with in situ ptychography

The present work reports novel soft X-ray Fresnel CDI ptychography results, demonstrating the potential of this method for dynamic in situ studies. Specifically, in situ ptychography experiments explored the electrochemical fabrication of Co-doped Mn-oxide/polypyrrole nanocomposites for sustainable and cost-effective fuel-cell air-electrodes. Oxygen-reduction catalysts based on Mn-oxides exhibit relatively high activity, but poor durability: doping with Co has been shown to improve both reduction rate and stability. In this study, we examine the chemical state distribution of the catalytically crucial Co dopant to elucidate details of the Co dopant incorporation into the Mn/polymer matrix. The measurements were performed using a custom-made three-electrode thin-layer microcell, developed at the TwinMic beamline of Elettra Synchrotron during a series of experiments that were continued at the SXRI beamline of the Australian Synchrotron. Our time-resolved ptychography-based investigation was carried out in situ after two representative growth steps, controlled by electrochemical bias. In addition to the observation of morphological changes, we retrieved the spectroscopic information, provided by multiple ptychographic energy scans across Co L3-edge, shedding light on the doping mechanism and demonstrating a general approach for the molecular-level investigation complex multimaterial electrodeposition processes.

Local carrier dynamics in organic thin film transistors investigated by time-resolved Kelvin probe force microscopy

Abstract Understanding the relationship between the microscopic structures and the carrier transport properties in organic electronic materials is of fundamental interest to exploit the potential of the materials and thus to realize highly efficient organic devices. In this study, carrier ejection processes in polycrystalline organic thin film transistors are investigated by time-resolved Kelvin probe force microscopy (tr-KPFM) that is capable of visualizing time evolution of the surface potential triggered by the application of a voltage pulse with a temporal resolution of 3 ms. The obtained tr-KPFM images show that the spatial distribution of the diffusing charge carriers is mostly non-homogeneous, reflecting the complex resistivity distribution in the channel region formed by the crystalline grains. The trapped charges in some grains diffuse to the electrodes on a time scale of several tens of milliseconds due to the low contact resistance of the grain boundaries, while most of the trapped charges diffuse on a time scale of hundreds of milliseconds.

Time-resolved photoluminescence investigation of (Mg, Zn) O alloy growth on a non-polar plane

Excitons recombination dynamics in ZnMgO alloy have been studied by time-resolved photoluminescence according to temperature. At low temperature, localisation effects of the exciton are found to play a significant role. The photoluminescence (PL) decays are bi-exponential. The short lifetime has a constant value, whereas the long lifetime shows a dependency with temperature. For temperature higher than 100 K the declines show a mono-exponential decay. The PL declines are dominated by non-radiative process at temperatures above 150 K. The PL lifetime dependancy with temperature is analysed using a model including localisation effects and non-radiative recombinations.

Influence of Nonstoichiometry on Proton Conductivity in Thin-Film Yttrium-Doped Barium Zirconate.

Proton-conducting perovskites have been widely studied because of their potential application as solid electrolytes in intermediate temperature solid oxide fuel cells. Structural and chemical heterogeneities can develop during synthesis, device fabrication, or service, which can profoundly affect proton transport. Here, we use time-resolved Kelvin probe force microscopy, scanning transmission electron microscopy, atom probe tomography, and density functional theory calculations to intentionally introduce Ba-deficient planar and spherical defects and link the resultant atomic structure with proton transport behavior in both stoichiometric and nonstoichiometric epitaxial, yttrium-doped barium zirconate thin films. The defects were intentionally induced through high-temperature annealing treatment, while maintaining the epitaxial single crystalline structure of the films, with an overall relaxation in the atomic structure. The annealed samples showed smaller magnitudes of local lattice distortions because of the formation of proton polarons, thereby leading to decreased proton-trapping effect. This resulted in a decrease in the activation energy for proton transport, leading to faster proton transport.