The use of CSP® thin slab casting followed by direct thermomechanical rolling is well placed for the production of low-carbon Nb microalloyed steels. In this process thin slabs of between 48 and 90 mm thickness are cast and directly hot rolled to hot strip typically between 1 and 12 mm thick. To obtain optimum strength and toughness property combinations in a direct rolling process, hot rolling has to compact the dendritic as-cast microstructure and to achieve a fine-grained microstructure. This affords a two-stage rolling strategy with start rolling above the recrystallization stop temperature and finish rolling in the non-recrystallization temperature range. Temperature and deformation in the first stand should be as high as possible in order to delete the initial as-cast microstructure by complete recrystallization. Based on these considerations, SMS Siemag further developed the CSP® concept including features allowing isothermal rolling in the first stands of the finishing mill. The present contribution gives the results of a laboratory study of this innovative approach. The report concludes with resulting new plant configurations for improved high strength and API linepipe grade production.