Abstract
Precipitation characteristics of second phase in low-carbon steel produced by FTSR technology have been researched by TEM and EDS in this article. And preliminary research of precipitation conditions of second phase particles in thermodynamics and dynamics have been took. The results indicate that: there’re second phase particles precipitated dispersively in hot rolled low-carbon steels by FTSR technology. These particles mainly contain particles of Al2O3, MnS and AlN, and the precipitate size is about tens to hundreds of nano. Thermodynamical analysis declares that most of the Al2O3 and all of the MnS, AlN particles are precipitated in solid state. That’s why the precipitation process is slowed down by the diffusion velocity of the elements in solid, and thinner particles are precipitated while the material is in solid state than in liquid state. Different from the traditional plate rolling production of Al-killed steel, the precipitation of AlN particles are mainly controlled by the continuous casting process in thin slab casting and rolling process, but almost no precipitation of AlN particles in the rolling process.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
