Thermoregulatory Properties Research Articles

Microclimate and thermal refuge influences on sage-grouse brood habitat selection

Wildlife space use is driven by three primary mechanisms, predator avoidance, foraging, and thermoregulation. The latter has largely been overlooked in wildlife research. Understanding how habitat use is influenced by thermoregulatory properties is a critical component to depicting species' ecology. Galliformes’ (i.e., ground nesting birds with precocial young) ecology is predisposed to thermal extremes, where newly hatched chicks are unable to thermoregulate <14 d post-hatch, and have limited capabilities until >21 d post-hatch. We examined greater sage-grouse (Centrocercus urophasianus) brood rearing habitats and provide the first evaluation as to how microscale thermal environments influenced habitat selection. We monitored 24 broods, collected 82,929 black bulb temperature measurements from thermal arrays (n = 256) comprised of stainless steel black bulbs (i.e., surrogate for operative temperature) to compare brood morning (i.e., foraging, n = 78), afternoon (i.e., loafing, n = 82) and associated random locations (n = 96) between early (≤21 d post-hatch) and late (>21 d post-hatch) brood-rearing. We measured vegetation at all locations to disentangle relationships between cover and thermoregulatory metrics. We found that microclimates at all foraging locations heated more rapidly than either their loafing or random locations. Alternatively, loafing locations moderated ambient temperature more effectively than foraging locations but were similar to random locations. Broods were using loafing sites that both increased their ability to avoid predators (i.e., increased shrub structure) and buffered ambient temperature better than their foraging locations. Interestingly, random afternoon locations tended to lack concealment from predators, despite these locations showing improved thermal buffering compared to foraging locations. However, early brood-rearing habitats appeared to moderate ambient temperatures more effectively than late. Our results suggested that managing vegetation for structural heterogeneity will afford a diversity of thermal refuge for greater sage-grouse broods during this critical life history stage.

Coaxial Fibres Incorporated with Phase Change Materials for Thermoregulation Applications

Nowadays, the growing concern about improving thermal comfort in different structures (textiles, buildings, and pavements, among others) has stimulated research into phase change materials (PCMs). The direct incorporation of PCMs into composite materials can cause mechanical impacts. Therefore, this study focuses on the design of phase change coaxial fibres (PCFs), using commercial cellulose acetate (CA) or recycled CA obtained from cotton fabrics (CAt) as the sheath and polyethylene glycol (PEG) 2000 as the core, via the wet spinning method; the fibres vary in molecular weight, concentration and ejection velocity. The fibres were assessed for their optical, chemical, thermal, and mechanical properties. The presence of PEG2000 is confirmed in the core of the fibres. Thermal analyses revealed a mass loss at high temperatures, attributable to the presence of PEG2000. Notably, the fibres with CA (Mn 30,000) showed superior thermal and mechanical performance. The melting point of PEG2000 incorporated into these PCFs coincided with the melting point of pure PEG2000 (about 55 °C), with a slight deviation, indicating that PCFs were obtained. Finally, the results point to the application of the fibres in civil engineering materials requiring a phase change between 50 and 60 °C, providing promising prospects for their use in applications requiring thermoregulatory properties.

Structure-activity relationships of serotonergic 5-MeO-DMT derivatives: insights into psychoactive and thermoregulatory properties

Recent studies have sparked renewed interest in the therapeutic potential of psychedelics for treating depression and other mental health conditions. Simultaneously, the novel psychoactive substances (NPS) phenomenon, with a huge number of NPS emerging constantly, has changed remarkably the illicit drug market, being their scientific evaluation an urgent need. Thus, this study aims to elucidate the impact of amino-terminal modifications to the 5-MeO-DMT molecule on its interactions with serotonin receptors and transporters, as well as its psychoactive and thermoregulatory properties. Our findings demonstrated, using radioligand binding methodologies, that all examined 5-MeO-tryptamines exhibited selectivity for 5-HT1AR over 5-HT2AR. In fact, computational docking analyses predicted a better interaction in the 5-HT1AR binding pocket compared to 5-HT2AR. Our investigation also proved the interaction of these compounds with SERT, revealing that the molecular size of the amino group significantly influenced their affinity. Subsequent experiments involving serotonin uptake, electrophysiology, and superfusion release assays confirmed 5-MeO-pyr-T as the most potent partial 5-HT releaser tested. All tested tryptamines elicited, to some degree, the head twitch response (HTR) in mice, indicative of a potential hallucinogenic effect and mainly mediated by 5-HT2AR activation. However, 5-HT1AR was also shown to be implicated in the hallucinogenic effect, and its activation attenuated the HTR. In fact, tryptamines that produced a higher hypothermic response, mediated by 5-HT1AR, tended to exhibit a lower hallucinogenic effect, highlighting the opposite role of both 5-HT receptors. Moreover, although some 5-MeO-tryptamines elicited very low HTR, they still act as potent 5-HT2AR agonists. In summary, this research offers a comprehensive understanding of the psychopharmacological profile of various amino-substituted 5-MeO-tryptamines, keeping structural aspects in focus and accumulating valuable data in the frame of NPS. Moreover, the unique characteristics of some 5-MeO-tryptamines render them intriguing molecules as mixed-action drugs and provide insight within the search of non-hallucinogenic but 5-HT2AR ligands as therapeutical agents.

Characterisation and energy storage performance of 3D printed-photocurable resin/microencapsulated phase change material composite

The 3D fabrication of microencapsulated phase change material (MEPCM) doped resin polymer composites enables the creation of complex shapes and customized designs, opening doors for many applications in fields. This investigation fabricated a range of resin/MEPCM (20 %, 30 %, and 40 % by volume) composites using a mechanical mixing technique. This study investigates how the addition of MEPCM impacts resin matrix composite's mechanical strength, latent heat storage characteristics, and ability to regulate temperature effectively. With a 40 % MEPCM additive ratio, a pure resin porosity value of approximately 0.4 % increased to around 17 %. Thanks to the production of homogeneously dispersed MEPCM added resins with production with stereolithography (SLA), 40 % MEPCM additive enabled characteristic FTIR peaks of both MEPCM and resin to appear and, melting and solidification enthalpy values reached 87.15 j/g and 86.25 j/g, respectively. MEPCM addition enhanced the thermoregulatory properties of resin by absorbing or releasing heat during temperature fluctuations. On hotter days, 8 mm-thick composites create temperature differences exceeding 11 °C, while this difference exceeds 6 °C in the room center case. The produced 3D printed MEPCM/resin composite can be a potential material to effectively regulate the temperature of electronic devices, food packets, building materials, and electronic devices and automotive components.

Footwear and neuromarketing. The relationship between thermoregulatory properties and consumer perceptions

Footwear and neuromarketing. The relationship between thermoregulatory properties and consumer perceptions

Bionic dual-scale structured films for efficient passive radiative cooling accompanied by robust durability.

Passive radiative cooling (PRC), as an energy-free cooling approach, is ingeniously harnessed for certain natural organisms to withstand extreme high-temperature climates, which has inspired numerous bionic designs. However, it is a great challenge to enhance the durability of the designed materials in practical scenarios while inheriting the natural biological principles. We demonstrate bionic dual-scale structured (BDSS) films for efficient passive radiative cooling accompanied by robust durability after discovering the excellent thermoregulatory properties of the inner surface of Hawaiian scallop shell. We found that the inner surface of the shell consists of large-scale triangular ridges scattered with small-scale terrace steps. This dual-scale structure can enhance the reflectivity of sunlight by efficient Mie scattering and increase the emissivity in the mid-infrared range by lengthening the propagation of photons, thereby decreasing the surface temperature. Underpinned by this finding, we developed a BDSS film that features a strong solar spectrum reflectivity of 0.95 and a high mid-infrared emissivity of 0.98, achieving a sub-ambient cooling of 10.8 °C under direct sunlight. Additionally, the designed films possess robust durability including excellent self-cleaning, flexibility, mechanical strength, chemical stability, and anti-ultraviolet radiation, which is promising for thermal thermoregulation in various harsh scenarios.

3D-printed polylactic acid-microencapsulated phase change material composites for building thermal management

The integration of phase change materials (PCM) into architectural elements is an emerging strategy to enhance thermal energy storage in modern buildings. This research examines 3D-printed polylactic acid structures incorporated with microencapsulated PCM, targeting a more efficient thermoregulation in foundational architectural sections such as walls, floors, and ceilings. Through rigorous evaluations, the polylactic acid-PCM composite revealed promising thermoregulatory properties. Notably, latent heat values stood at 198.4 J/g for melting and 197.9 J/g for freezing. Real-world experiments demonstrated a distinct advantage, maintaining temperatures 3.2°C–3.3 °C higher than standard polylactic acid at night and exhibiting a cooler range of 10.4 °C–13.3 °C during daylight. Within specific geographical contexts, like the Mediterranean and Aegean Seas coastline, 0.026 m thick polylactic acid-PCM panels stood out, registering 100 % energy savings. The findings consistently showed that an increase in panel thickness correlated with a decrease in building heating needs. Further analysis explored the carbon emissions landscape. Coal, when utilized with 0.05 m-thick polylactic acid-PCM panels, was identified as particularly effective, yielding a reduction of 34 kg/m2 in annual CO2 emissions. Collectively, the findings underscore the transformative potential of polylactic acid-PCM composites, positioning them as pivotal tools for advancing architectural energy efficiency and fostering sustainable building innovations.

Hydrophobic aerogel-modified hemostatic gauze with thermal management performance.

Current hemostatic agents or dressings are not efficient under extremely hot and cold environments due to deterioration of active ingredients, water evaporation and ice crystal growth. To address these challenges, we engineered a biocompatible hemostatic system with thermoregulatory properties for harsh conditions by combining the asymmetric wetting nano-silica aerogel coated-gauze (AWNSA@G) with a layer-by-layer (LBL) structure. Our AWNSA@G was a dressing with a tunable wettability prepared by spraying the hydrophobic nano-silica aerogel onto the gauze from different distances. The hemostatic time and blood loss of the AWNSA@G were 5.1 and 6.9 times lower than normal gauze in rat's injured femoral artery model. Moreover, the modified gauze was torn off after hemostasis without rebleeding, approximately 23.8 times of peak peeling force lower than normal gauze. For the LBL structure, consisting of the nano-silica aerogel layer and a n-octadecane phase change material layer, in both hot (70°C) and cold (-27°C) environments, exhibited dual-functional thermal management and maintained a stable internal temperature. We further verified our composite presented superior blood coagulation effect in extreme environments due to the LBL structure, the pro-coagulant properties of nano-silica aerogel and unidirectional fluid pumping of AWNSA@G. Our work, therefore, shows great hemostasis potential under normal and extreme temperature environments.

Novel smart coaxial electrospinning textiles for efficient thermal interface management and electromagnetic compatibility in electronics

Phase change materials (PCMs) have attracted considerable attention for their energy storage and thermoregulatory properties. However, the solid–liquid leakage, low thermal conductivity, and single functionality of PCMs hinder their applications to electronic equipment. In this study, polyvinyl alcohol (PVA) and polyethylene oxide/ferric oxide (PEO/Fe3O4)-based core–sheath textiles are prepared using an eco-friendly coaxial electrospinning technique and simple steam crosslinking. The composite phase change fibers (CPCFs) and magnetic composite phase change fibers (MCPCFs) produced in this way show ultrahigh encapsulation ratios of 78.02 wt% and 69.11 wt%, respectively, and high phase change enthalpies of 106.96 J g−1 and 94.75 J g−1, respectively. The addition of Fe3O4 (20 wt%) introduces a saturation magnetization of 9.5 emu g−1, thereby realizing 3 dB electromagnetic shielding performance. The textiles exhibit excellent flexibility and can be formed into complex shapes. Owing to their core–sheath structure, the CPCFs and MCPCFs exhibit outstanding structural and thermal stabilities during 100 thermal cycles. Furthermore, the mechanical properties of the CPCF and MCPCF textiles can be enhanced by crosslinking.

Social sleepers: The effects of social status on sleep in terrestrial mammals

Social status among group-living mammals can impact access to resources, such as water, food, social support, and mating opportunities, and this differential access to resources can have fitness consequences. Here, we propose that an animal's social status impacts their access to sleep opportunities, as social status may predict when an animal sleeps, where they sleep, who they sleep with, and how well they sleep. Our review of terrestrial mammals examines how sleep architecture and intensity may be impacted by (1) sleeping conditions and (2) the social experience during wakefulness. Sleeping positions vary in thermoregulatory properties, protection from predators, and exposure to parasites. Thus, if dominant individuals have priority of access to sleeping positions, they may benefit from higher quality sleeping conditions and, in turn, better sleep. With respect to waking experiences, we discuss the impacts of stress on sleep, as it has been established that specific social statuses can be characterized by stress-related physiological profiles. While much research has focused on how dominance hierarchies impact access to resources like food and mating opportunities, differential access to sleep opportunities among mammals has been largely ignored despite its potential fitness consequences.

Evaluation of Printability and Thermal Properties of 3D Printed Concrete Mixed with Phase Change Materials

Three-dimensional (3D) printed concrete has recently received considerable research attention. In buildings, phase change materials (PCMs) with excellent thermoregulatory properties and thermal storage capacity can improve the insulation capacity of external walls and reduce energy consumption. In this study, microencapsulated paraffin was added to a 3D printable material and a 3D printed phase-change concrete was developed, resulting in good printability and buildability. The compressive and flexural strengths were declined maximally by 44.6% and 37.5%, respectively, with 20 wt% PCM mixed. Results from 3D printed room models proved the thermo-regulated performance by regulating the room temperature when mixed with 20 wt% PCM. With the addition of PCM, 3D printed facilities can have sufficient thermal comfort.

Age-Related Changes in the Thermoregulatory Properties in Bank Voles From a Selection Experiment.

As with many physiological performance traits, the capacity of endotherms to thermoregulate declines with age. Aging compromises both the capacity to conserve or dissipate heat and the thermogenesis, which is fueled by aerobic metabolism. The rate of metabolism, however, not only determines thermogenic capacity but can also affect the process of aging. Therefore, we hypothesized that selection for an increased aerobic exercise metabolism, which has presumably been a crucial factor in the evolution of endothermic physiology in the mammalian and avian lineages, affects not only the thermoregulatory traits but also the age-related changes of these traits. Here, we test this hypothesis on bank voles (Myodes glareolus) from an experimental evolution model system: four lines selected for high swim-induced aerobic metabolism (A lines), which have also increased the basal, average daily, and maximum cold-induced metabolic rates, and four unselected control (C) lines. We measured the resting metabolic rate (RMR), evaporative water loss (EWL), and body temperature in 72 young adult (4 months) and 65 old (22 months) voles at seven ambient temperatures (13–32°C). The RMR was 6% higher in the A than in the C lines, but, regardless of the selection group or temperature, it did not change with age. However, EWL was 12% higher in the old voles. An increased EWL/RMR ratio implies either a compromised efficiency of oxygen extraction in the lungs or increased skin permeability. This effect was more profound in the A lines, which may indicate their increased vulnerability to aging. Body temperature did not differ between the selection and age groups below 32°C, but at 32°C it was markedly higher in the old A-line voles than in those from other groups. As expected, the thermogenic capacity, measured as the maximum cold-induced oxygen consumption, was decreased by about 13% in the old voles from both selection groups, but the performance of old A-line voles was the same as that of the young C-line ones. Thus, the selection for high aerobic exercise metabolism attenuated the adverse effects of aging on cold tolerance, but this advantage has been traded off by a compromised coping with hot conditions by aged voles.

Investigation of Thermal Behavior of 3D PET Knits with Different Bioceramic Additives.

The purpose of this study is to investigate the thermoregulatory properties of polyethylene terephthalate (PET) 3D knitted materials with bioceramic additives which are highly absorbing far-infrared (FIR) radiation. Ceramic materials are well-known and useful for thermal insulation applications. In order to compare different types of ceramic additives and coating methods for their incorporation into textile, several types of ceramic compounds with heat-retaining function were selected: germanium (Ge), aluminum (Al) and silicon (Si) additives were applied by impregnation in squeezing padder and titanium (Ti) by the screen printing method. The thermoregulatory properties (thermal resistance, heat-retaining effectiveness and air permeability) of 3D PET knits with bioceramic additives were estimated. In this study scanning electron microscopy (SEM) images were used to analyze the morphology of coated fabrics, X-ray fluorescence spectroscopy (XRF) analysis was applied to evaluate the number of minerals with high heat capacity in each formulation used for treatment. The knits coated with a formulation containing Ti ceramic additives demonstrated the most effective thermal behavior. Furthermore, better heat accumulation effectiveness of Ti ceramics containing knits was confirmed by Fourier transform infrared spectroscopy (FTIR) analysis. It was also determined that 3D knitted fabric with Ti ceramic additives showed the highest emissivity among tested samples and the implication is that this sample radiates its energy more efficiently than others.

The Thermal Tolerances, Distributions, and Performances of Tropical Montane Tree Species

Due to global warming, many species will face greater risks of thermal stress, which can lead to changes to performance, abundance and/or geographic distributions. In plants, high temperatures above a species-specific critical thermal maximum will permanently damage photosystem II, leading to decreased electron transport rates, photosynthetic failure, and eventual leaf and plant death. Previous studies have shown that plant thermal tolerances vary with latitude, but little is known about how they change across smaller-scale thermal gradients (i.e., with elevation) or about how these thermal tolerances relate to species’ local performances and geographic distributions. In this study, we assess the maximum photosynthetic thermal tolerances (T50) of nearly 200 tropical tree species growing in 10 forest plots distributed across a >2500 meter elevation gradient (corresponding to a 17oC temperature gradient) in the northern Andes Mountains of Colombia. Using these data, we test the relationships between species’ thermal tolerances and 1) plot elevations and temperatures, 2) species’ large-scale geographic distributions, and 3) changes in species’ abundances through time within the plots. We found that species’ T50 do in fact decrease with plot elevation but significantly slower than the corresponding adiabatic lapse rate (-0.4 vs. -5.7oC km-1) and that there remains a large amount of unexplained variation in the thermal tolerances of co-occurring tree species. There was only a very weak association between species’ thermal tolerances and their large-scale geographic distributions and no significant relationships between species’ thermal tolerances and their changes in relative abundance through time. A potential explanation for these results is that thermal tolerances are adaptations to extreme leaf temperatures that can be decoupled from regional air temperatures due to microclimatic variations and differences in the species’ leaf thermoregulatory properties.

Alteration of Bumblebee Venom Composition toward Higher Elevation.

Venomous animals use venom, a complex biofluid composed of unique mixtures of proteins and peptides, for either predation or defense. Bumblebees, which occur in various habitats due to their unique thermoregulatory properties, mainly use venom for defense. Herein, we conducted an exploratory analysis of the venom composition of a bumblebee species (Bombus pascuorum) along an elevation gradient in the western Swiss Alps using shot-gun proteomic approaches to assess whether their defense mechanism varies along the gradient. The gradient was characterized by high temperatures and low humidity at low elevations and low temperatures and high humidity at high elevations. Venom composition is changing along the elevation gradient, with proteomic variation in the abundances of pain-inducing and allergenic proteins. In particular, the abundance of phospholipase A2-like, the main component of bumblebee venom, gradually decreases toward higher elevation (lower temperature), suggesting venom alteration and thus a decrease in bumblebee defense towards harsher environments. Larger datasets may complement this study to validate the observed novel trends.

Testing the role of ecological selection on colour pattern variation in the butterfly Parnassius clodius.

Colour pattern has served as an important phenotype in understanding the process of natural selection, particularly in brightly coloured and variable species like butterflies. However, different selective forces operate on aspects of colour pattern, for example by favouring warning colours in eyespots or alternatively favoring investment in thermoregulatory properties of melanin. Additionally, genetic drift influences colour phenotypes, especially in populations undergoing population size change. Here, we investigated the relative roles of genetic drift and ecological selection in generating the phenotypic diversity of the butterfly Parnassius clodius. Genome-wide patterns of single nucleotide polymorphism data show that P. clodius forms three population clusters, which experienced a period of population expansion following the last glacial maximum and have since remained relatively stable in size. After correcting for relatedness, morphological variation is best explained by climatic predictor variables, suggesting ecological selection generates trait variability. Solar radiation and precipitation are both negatively correlated with increasing total melanin in both sexes, supporting a thermoregulatory function of melanin. Similarly, wing size traits are significantly larger in warmer habitats for both sexes, supporting a Converse Bergmann Rule pattern. Bright red coloration is negatively correlated with temperature seasonality and solar radiation in males, and weakly associated with insectivorous avian predators in univariate models, providing mixed evidence that selection is linked to warning coloration and predator avoidance. Together, these results suggest that elements of butterfly wing phenotypes respond independently to different sources of selection and that thermoregulation is an important driver of phenotypic differentiation in Parnassian butterflies.

A dynamic thermoregulatory material inspired by squid skin

Effective thermal management is critical for the operation of many modern technologies, such as electronic circuits, smart clothing, and building environment control systems. By leveraging the static infrared-reflecting design of the space blanket and drawing inspiration from the dynamic color-changing ability of squid skin, we have developed a composite material with tunable thermoregulatory properties. Our material demonstrates an on/off switching ratio of ~25 for the transmittance, regulates a heat flux of ~36 W/m2 with an estimated mechanical power input of ~3 W/m2, and features a dynamic environmental setpoint temperature window of ~8 °C. Moreover, the composite can manage one fourth of the metabolic heat flux expected for a sedentary individual and can also modulate localized changes in a wearer’s body temperature by nearly 10-fold. Due to such functionality and associated figures of merit, our material may substantially reduce building energy consumption upon widespread deployment and adoption.

Thermoregulating and hydrophobic nanofibers

Phase changing materials are widely investigated in many different aspects due to the increasing interest in energy storage applications, thermal insulation and thermal comfort. Electrospinning is a simple technique for producing ultrafine (sub-micron) fibers from a wide variety of polymers. With PCMs, it is generally used as a method to obtain shape stabilized PCMs. In this study, microencapsulated phase change materials (MPCM) are incorporated into nanofiber structure. Morphology, chemical structure, thermal properties and water absorbency of the composite nanofibers are investigated. Uniform nanofibers displaying both thermoregulatory properties and hydrophobicity were obtained.

Duplication of hsp-110 Is Implicated in Differential Success of Globodera Species under Climate Change.

Managing the emergence and spread of crop pests and pathogens is essential for global food security. Understanding how organisms have adapted to their native climate is key to predicting the impact of climate change. The potato cyst nematodes Globodera pallida and G. rostochiensis are economically important plant pathogens that cause yield losses of up to 50% in potato. The two species have different thermal optima that may relate to differences in the altitude of their regions of origin in the Andes. Here, we demonstrate that juveniles of G. pallida are less able to recover from heat stress than those of G. rostochiensis. Genome-wide analysis revealed that while both Globodera species respond to heat stress by induction of various protective heat-inducible genes, G. pallida experiences heat stress at lower temperatures. We use C. elegans as a model to demonstrate the dependence of the heat stress response on expression of Heat Shock Factor-1 (HSF-1). Moreover, we show that hsp-110 is induced by heat stress in G. rostochiensis, but not in the less thermotolerant G. pallida. Sequence analysis revealed that this gene and its promoter was duplicated in G. rostochiensis and acquired thermoregulatory properties. We show that hsp-110 is required for recovery from acute thermal stress in both C. elegans and in G. rostochiensis. Our findings point towards an underlying molecular mechanism that allows the differential expansion of one species relative to another closely related species under current climate change scenarios. Similar mechanisms may be true of other invertebrate species with pest status.

Thermo-regulatory Properties of Wool Fabrics by Microencapsulated PCM

Thermo-regulatory Properties of Wool Fabrics by Microencapsulated PCM