Increase In Temperature Research Articles

Melting Curve of Black Phosphorus: Evidence for a Solid-Liquid-Liquid Triple Point.

Black phosphorus (bP) is a crystalline material that can be seen as an ordered stacking of two-dimensional layers, which results in outstanding anisotropic physical properties. The knowledge of its pressure (P)-temperature (T) phase diagram, and in particular, of its melting curve is fundamental for a better understanding of the synthesis and stability conditions of this element. Despite the numerous studies devoted to this subject, significant uncertainties remain regarding the determination of the position and slope of its melting curve. Here we measured the melting curve of bP in an extended P, T region from 0.10(3) to 5.05(40) GPa and from 914(25) to 1788(70) K, using in situ high-pressure and high-temperature synchrotron X-ray diffraction. We employed an original metrology based on the anisotropic thermoelastic properties of bP to accurately determine P and T. We observed a monotonic increase of the melting temperature with pressure and the existence of two distinct linear regimes below and above 1.35(15) GPa, with respective slopes of 348 ± 21 and of 105 ± 12 K·GPa-1. These correspond to the melting of bP toward the low-density liquid and the high-density liquid, respectively. The triple point at which solid bP and the two liquids meet is located at 1.35(15) GPa and 1350(25) K. In addition, we have characterized the solid phases after crystallization of the two liquids and found that, while the high-density liquid transforms back to solid bP, the low-density liquid crystallizes into a more complex, partly crystalline and partly amorphous solid. The X-ray diffraction pattern of the crystalline component could be indexed as a mixture of red and violet P.

Investigations of the adsorbed layer of polysulfone: Influence of the thickness of the adsorbed layer on the glass transition of thin films.

This work studies the influence of the adsorbed layer on the glass transition of thin films of polysulfone. Therefore, the growth kinetics of the irreversibly adsorbed layer of polysulfone on silicon substrates was first investigated using the solvent leaching approach, and the thickness of the remaining layer was measured with atomic force microscopy. Annealing conditions before leaching were varied in temperature and time (0-336h). The growth kinetics showed three distinct regions: a pre-growth step where it was assumed that phenyl rings align parallel to the substrate at the shortest annealing times, a linear growth region, and a crossover from linear to logarithmic growth observed at higher temperatures for the longest annealing times. No signs of desorption were observed, pointing to the formation of a strongly adsorbed layer. Second, the glass transition of thin polysulfone films was studied in dependence on the film thickness using spectroscopic ellipsometry. Three annealing conditions were compared: two with only a tightly bound layer formed in the linear growth regime and one with both tightly bound and loosely adsorbed layers formed in the logarithmic growth regime. The onset thickness and increase in the glass transition temperature increases with annealing time and temperature. These differences were attributed to the distinct conformations of the formed adsorbed layers.

The effect of initial temperature on the mechanical strength of tricalcium phosphate/Chitosan/Silica aerogels nanocomposites using molecular dynamics simulation

BackgroundChitosan is an organic polymer derived from chitin, showcasing commendable biocompatibility and biodegradability, while tricalcium phosphate emerges as an active ceramic with proven biocompatibility and superior compatibility with bone tissue. This composite material, endowed with a unique amalgamation of attributes including biocompatibility, porosity, and mechanical strength, proves highly applicable in diverse fields such as tissue engineering, drug delivery systems, wound repair, and as scaffolds for cell proliferation in regenerative medicine. MethodsThe focal point of this study is an exploration of the nuanced interplay between the mechanical properties of silica aerogel/chitosan tricalcium phosphate nanocomposites with increasing initial temperature. Employing molecular dynamics (MD) simulation, the research aims to unveil the temperature-induced variations in the critical properties. Significant FindingsThe results reveal that the ultimate strength and Young's modulus values are determined to converge to 772.28 MPa and 62.291 GPa, at 297 K. As the initial temperature escalates from 300 to 350 K, the US decreases from 72.28 to 714.47 MPa. The decrease in US could be due to higher temperatures, the increased thermal energy can lead to greater atomic vibrations within the material, which can promote easier dislocation movement and result in reduced resistance to deformation. The results reveal that as temperature increases to 320 K, YM increases to 67.134, and with further increase in temperature, YM decreases to 62.865 GPa

The Effects of Climate Change on Normalized Difference Vegetation Index (NDVI) in the Al-Hawizeh Marsh

This study aims to classify Landsat 7,8 satellite data using Normalized Difference Vegetation Index (NDVI) thresholds. Initially, visible and near infrared bands of Landsat 8 satellite were used to derive (NDVI) image. Vegetation, non-vegetation and water areas were then analyzed where thresholds for separating them are carefully determined with the aid of ground truth information of the study area. Also, The Mann-Kendall test was conducted to analyze the trend of temperature and precipitation in the study area. The results of the analysis showed a positive trend with an increase in temperature. On the contrary, a negative trend in precipitation remained constant, as it was not statistically significant. The study correlated the historical trends of climatic elements as a central factor in the degradation of swamps (vegetation cover) from 2000 to 2010 and (2015-2023). The results showed that the year 2015 witnessed an increase in the area of NDVI compared to the years studied, as the total area of vegetation cover during this year amounted to about 537.47 km2, by 79.4%. While the year 2023 was one of the worst years of the study area, as the marshes witnessed an increase in the area of dry lands at the expense of the marsh waters, as the area of these lands reached about 354.69 km2 by 52.40%. The findings of this study are that the application of the three indices is useful for evaluating land, especially NDVI in wetlands. So it is necessary to develop and integrate with other remote sensing indices.

Tribological properties of HFCVD diamond coatings over wide temperature range

Single and gradient multilayered diamond coatings, deposited on silicon nitride (Si3N4), were prepared by hot filament chemical vapour deposition. The tribological properties were evaluated in a wide temperature range (26 °C–300 °C), against Si3N4 ceramic balls, as the friction counterpart. The results showed that with the increase of temperature from 26 °C to 300 °C, the wear rate of NCD (nanocrystalline diamond) and GCD (gradient diamond) coatings rapidly increases. When the temperature reaches 300 °C, obvious cracks and detachment appear on the surface of the NCD coatings. Due to the special interlayer, the wear rate of the GCD coatings is lower than that of the NCD coatings. In the range of 26 °C to 100 °C, GCD exhibits excellent wear resistance and low friction coefficient due to its special gradient structure. When the temperature increases to 200 °C, NCD films with smaller grain sizes exhibit higher wear rates. From the wear morphology, it can be seen that cracks are generated in the NCD film, and as the temperature increases, the cracks continue to expand until the film spalling. GCD shows relatively good wear resistance at high temperatures. This study found that gradient multilayered diamond coatings exhibited superior wear resistance at high temperatures, compared with single-layer coatings tested in identical conditions.

The give and take of Arctic greening: differential responses of the carbon sink-to-source threshold to light and temperature in tussock tundra may be influenced by vegetation cover

A significant warming effect on arctic tundra is greening. Although this increase in predominantly woody vegetation has been linked to increases in gross primary productivity, increasing temperatures also stimulate ecosystem respiration. We present a novel analysis from small-scale plot measurements showing that the shape of the temperature- and light-dependent sink-to-source threshold (where net ecosystem exchange (NEE) equals zero) differs between two tussock tundra ecosystems differing in leaf area index (LAI). At the higher LAI site, the threshold is exceeded (i.e the ecosystem becomes a source) at relatively higher temperatures under low light but at lower temperatures under high light. At the lower LAI site, the threshold is exceeded at relatively lower temperatures under low light but at higher temperatures under high light. We confirmed this response at a single site where LAI was experimentally increased. This suggests the carbon balance of the tundra may be sensitive to small increases in temperature under low light, but that this effect may be significantly offset by increases in LAI. Importantly, we found that this LAI effect is reversed under high light, and so in a warming tundra, greater vegetation cover could have a progressively negative effect on net carbon uptake.

Insights into the Mechanical-Structural-Energetic Responses of RDX Nanoparticles from Molecular Dynamics Simulation.

When the particle size of energetic materials is reduced to the nanoscale, significant changes occur in their properties and behavior. In this work, compression processes of three RDX nanoparticles (A, B, and C) were simulated using ReaxFF-lg. The mechanical, structural, and energetic responses of RDX nanoparticles during compression were revealed and characterized. Simulations reveal that the compression process of the nanoparticles can be divided into three stages: elastic stage, primary damage stage, and sustained damage stage. The temperature increase rate in the elastic phase is much lower than in the primary damage phase. In addition, we found that the smaller nanoparticle B presents a smaller elastic modulus and compressive strength, and it has a slower rate of temperature increase during the primary damage phase. Compared to cuboidal nanoparticles (A and B), the spherical nanoparticle C tends to absorb less energy during the elastic stage and exhibits slower damage rate during the primary damage stage. This is a key factor contributing to the low sensitivity of spherical nanoparticles.

Critical climate-stress moments for semi-arid farming systems in India

In the face of the increasing frequency of climate stresses, climate change projections can help in adaptation planning and resilience-building. However, typical climate change projections, such as annual average rainfall and temperature increases, are not helpful for farmers in understanding specific climate risks, like crop loss, and making adaptation decisions. Our study aims to identify and characterise context- and time-specific climate stresses in terms of climate conditions of concern to improve the understanding of future climate risks and enhance the climate resilience of semi-arid farming systems in India. Utilising the concept of critical climate-stress moments, we employ an innovative bottom-up methodology integrating insights from focus group discussions with farmers, key informant interviews, and an ensemble of downscaled and bias-corrected Coupled Model Intercomparison Project Phase 6 (CMIP-6) models. Our case studies include (i) a mixed crop-livestock farming system, (ii) a horticulture-based farming system, (iii) a cash crop–dominant farming system, and (iv) a cereal-dominant farming system. The specific climate conditions of concern identified were (i) increasing volume of late-monsoon rainfall, (ii) rising winter temperatures, (iii) increase in the number of days with temperatures exceeding 40 °C, (iv) increase in days with heavy rainfall (> 25 mm), and (v) increasing rainfall during the dry season. Identifying these critical moments improves understanding of both the temporal and spatial variations in climate risks, providing valuable inputs for targeted and implementable climate resilience–building actions. We recommend revising national and state action plans on climate change by utilising such region-specific assessments of critical climate-stress moments.

Transcriptomic and physiological responses of Quercus acutissima and Quercus palustris to drought stress and rewatering

Establishment of oak seedlings, which is an important factor in forest restoration, is affected by drought that hampers the survival, growth, and development of seedlings. Therefore, it is necessary to understand how seedlings respond to and recover from water-shortage stress. We subjected seedlings of two oak species, Quercus acutissima and Quercus palustris, to drought stress for one month and then rewatered them for six days to observe physiological and genetic expression changes. Phenotypically, the growth of Q. acutissima was reduced and severe wilting and recovery failure were observed in Q. palustris after an increase in plant temperature. The two species differed in several physiological parameters during drought stress and recovery. Although the photosynthesis-related indicators did not change in Q. acutissima, they were decreased in Q. palustris. Moreover, during drought, content of soluble sugars was significantly increased in both species, but it recovered to original levels only in Q. acutissima. Malondialdehyde content increased in both the species during drought, but it did not recover in Q. palustris after rewatering. Among the antioxidant enzymes, only superoxide dismutase activity increased in Q. acutissima during drought, whereas activities of ascorbate peroxidase, catalase, and glutathione reductase increased in Q. palustris. Abscisic acid levels were increased and then maintained in Q. acutissima, but recovered to previous levels after rewatering in Q. palustris. RNA samples from the control, drought, recovery day 1, and recovery day 6 treatment groups were compared using transcriptome analysis. Q. acutissima exhibited 832 and 1076 differentially expressed genes (DEGs) related to drought response and recovery, respectively, whereas Q. palustris exhibited 3947 and 1587 DEGs, respectively under these conditions. Gene ontology enrichment of DEGs revealed “response to water,” “apoplast,” and “Protein self-association” to be common to both the species. However, in the heatmap analysis of genes related to sucrose and starch synthesis, glycolysis, antioxidants, and hormones, the two species exhibited very different transcriptome responses. Nevertheless, the levels of most DEGs returned to their pre-drought levels after rewatering. These results provide a basic foundation for understanding the physiological and genetic expression responses of oak seedlings to drought stress and recovery.

Thermal shock resistance of additively manufactured alumina

AbstractThe mechanical behavior and cracking patterns of thermally‐shocked additively manufactured alumina were investigated. The flexural strength of test specimens that had been heated to temperatures ranging from 200°C to 1000°C and then rapidly quenched in water was determined at ambient temperature by four‐point bending. Results indicated that the surface cracking patterns had a multifractal structure and that an increase in the thermal shock temperature led to an increase in the density and uniformity of the crack network. The flexural strength results were analyzed with Weibull statistics, where the Weibull moduli for most of the thermal shock conditions tested were found to be statistically indistinguishable. It was also found that a significant decrease (∼50%) in flexural strength occurred for heating temperatures ≥300°C. The effect of the manufacturing method on cracking patterns is discussed, as well as the implication of the material behavior for practical applications of these materials.

Changes in the Plasma Sheet Conditions at Europa's Orbit Retrieved From Lead Angle of the Satellite Auroral Footprints

AbstractThe electromagnetic interaction between Europa and the plasma sheet in the Jovian magnetosphere generates Alfvén waves, ultimately generating auroral footprints in Jupiter's atmosphere. The position of Europa's auroral footprint is a proxy for travel time of the Alfvén waves. We measured Europa's footprint position using the far‐ultraviolet images of Jupiter obtained by the Hubble Space Telescope in two observing campaigns in 2014 and 2022. The measured footprint position indicates a longer Alfvén travel time in the 2022 campaign. We retrieved the plasma sheet parameters at Europa's orbit from the footprint position by tracing the Alfvén waves launched at Europa and found an increase of both mass density and temperature in the plasma sheet in 2022. The Poynting flux generated at Europa is calculated with the retrieved plasma sheet parameters, which suggests the total energy transfer from Europa to its auroral footprint is similar to the case of Io.

Investigation on the thermal runaway mechanism of electrolyte in lithium-ion batteries via ReaxFF molecular dynamics

Lithium-ion batteries have the advantages of high energy density and high cycle times, and have been widely used in portable electronic devices, electric vehicles, and large-scale energy storage. However, lithium-ion batteries are prone to thermal runaway. Subsequently, electrolyte decomposition and combustion occur, leading to an increase in battery temperature and even causing fires or explosions. In order to explore the reaction mechanism of thermal runaway in lithium-ion battery electrolytes, the volatile and combustible organic solvents are selected as the research object. Three different organic solvents were established, namely pure ethylene carbonate (C3H4O3) solvent and its mixture with dimethyl carbonate (C3H6O3) and diethyl carbonate (C5H10O3), respectively. The effect of heating on the thermal runaway of organic solvents was studied using reactive force field molecular dynamics (ReaxFF MD). All three organic solvents will produce a large amount of CH2 free groups and flammable organic substances such as C2H4 during pyrolysis, which is the main reason for thermal runaway of lithium-ion batteries. The research results may contribute to preventing and suppressing thermal runaway in lithium-ion batteries.

Variation of temperature increase rate in the Northern Hemisphere according to latitude, longitude and altitude: the Turkey example

Global climate change notably influences meteorological variables such as temperature, affecting regions and countries worldwide. In this study, monthly average temperature data spanning 73 years (1950–2022) were analyzed for 28 stations in the city centers across seven regions of Turkey. The station warming rates (SWR) were calculated for selected stations and the overall country using Singular Spectrum Analysis (SSA) and Least Square Polynomial Fit (LSPF) methods. The temperature trend in Turkey exhibited a decline until the late 1970s, followed by a continuous rise due to global warming. Between 1980 and 2022, the average SWR in Turkey was found to be 0.52 °C/decade. The SWR was determined to be the lowest in Antakya (0.28 °C/decade) and the highest in Erzincan (0.69 °C/decade). The relationship between SWR and latitude, longitude, altitude, and distance to Null Island (D2NI) was explored through linear regression analysis. Altitude and D2NI were found to be the most significant variables, influencing the SWR. For altitude, the correlation coefficient (R) was 0.39 with a statistically significant value (p) of 0.039. For D2NI, R, and p values were 0.39 and 0.038, respectively. Furthermore, in the multiple regression analysis involving altitude and D2NI, R and p values were determined to be 0.50 and 0.029, respectively. Furthermore, the collinearity analysis indicates no collinearity between altitude and D2NI, suggesting that their effects are separated in the multiple regression.

Evidence of non-isentropic release from high residual temperatures in shocked metals measured with ultrafast x-ray diffraction

Shock experiments are widely used to understand the mechanical and electronic properties of matter under extreme conditions. However, after shock loading to a Hugoniot state, a clear description of the post-shock thermal state and its impacts on materials is still lacking. We used diffraction patterns from 100-fs x-ray pulses to investigate the temperature evolution of laser-shocked Al–Zr metal film composites at time delays ranging from 5 to 75 ns driven by a 120-ps short-pulse laser. We found significant heating of both Al and Zr after shock release, which can be attributed to heat generated by inelastic deformation. A conventional hydrodynamic model that employs (i) typical descriptions of Al and Zr mechanical strength and (ii) elevated strength responses (which might be attributed to an unknown strain rate dependence) did not fully account for the measured temperature increase, which suggests that other strength-related mechanisms (such as fine-scale void growth) could play an important role in thermal responses under shock wave loading/unloading cycles. Our results suggest that a significant portion of the total shock energy delivered by lasers becomes heat due to defect-facilitated plastic work, leaving less converted to kinetic energy. This heating effect may be common in laser-shocked experiments but has not been well acknowledged. High post-shock temperatures may induce phase transformation of materials during shock release. Another implication for the study is the preservability of magnetic records from planetary surfaces that have a shock history from frequent impact events.

Bacterial reduction and temperature increase of titanium dental implant models treated with a 445 nm diode laser: an in vitro study

In this in vitro study, the use of a 445 nm diode laser was investigated for the decontamination of titanium dental implants. Different irradiation protocols and the effect of repetitive laser irradiation on temperature increase and decontamination efficacy were evaluated on titanium implant models. An automated setup was developed to realize a scanning procedure for a full surface irradiation to recapitulate a clinical treatment. Three irradiation parameter sets A (continuous wave, power 0.8 W, duty cycle (DC) 100%, and 5 s), B (pulsed mode, DC 50%, power 1.0 W, and 10 s), and C (pulsed mode, DC 10%, power 3.0 W, and 20 s) were used to treat the rods for up to ten consecutive scans. The resulting temperature increase was measured by a thermal imaging camera and the decontamination efficacy of the procedures was evaluated against Escherichia coli and Staphylococcus aureus, and correlated with the applied laser fluence. An implant’s temperature increase of 10 °C was set as the limit accepted in literature to avoid thermal damage to the surrounding tissue in vivo. Repeated irradiation of the specimens resulted in a steady increase in temperature. Parameter sets A and B caused a temperature increase of 11.27 ± 0.81 °C and 9.90 ± 0.37 °C after five consecutive laser scans, respectively, while parameter set C resulted in a temperature increase of only 8.20 ± 0.53 °C after ten surface scans. The microbiological study showed that all irradiation parameter sets achieved a complete bacterial reduction (99.9999% or 6-log10) after ten consecutive scans, however only parameter set C did not exceed the temperature threshold. A 445 nm diode laser can be used to decontaminate dental titanium rods, and repeated laser irradiation of the contaminated areas increases the antimicrobial effect of the treatment; however, the correct choice of parameters is needed to provide adequate laser fluence while preventing an implant’s temperature increase that could cause damage to the surrounding tissue.

Guided Plasma Application in Dentistry—An Alternative to Antibiotic Therapy

Cold atmospheric plasma (CAP) is a promising alternative to antibiotics and chemical substances in dentistry that can reduce the risk of unwanted side effects and bacterial resistance. AmbiJet is a device that can ignite and deliver plasma directly to the site of action for maximum effectiveness. The aim of the study was to investigate its antimicrobial efficacy and the possible development of bacterial resistance. The antimicrobial effect of the plasma was tested under aerobic and anaerobic conditions on bacteria (five aerobic, three anaerobic (Gram +/−)) that are relevant in dentistry. The application times varied from 1 to 7 min. Possible bacterial resistance was evaluated by repeated plasma applications (10 times in 50 days). A possible increase in temperature was measured. Plasma effectively killed 106 seeded aerobic and anaerobic bacteria after an application time of 1 min per 10 mm2. Neither the development of resistance nor an increase in temperature above 40 °C was observed, so patient discomfort can be ruled out. The plasma treatment proved to be effective under anaerobic conditions, so the influence of ROS can be questioned. Our results show that AmbiJet efficiently eliminates pathogenic oral bacteria. Therefore, it can be advocated for clinical therapeutic use.

MPK4-mediated phosphorylation of PHYTOCHROME INTERACTING FACTOR4 controls thermosensing by regulating histone variant H2A.Z deposition.

Plants can perceive a slight upsurge in ambient temperature and respond by undergoing morphological changes, such as elongated hypocotyls and early flowering. The dynamic functioning of PHYTOCHROME INTERACTING FACTOR4 (PIF4) in thermomorphogenesis is well established, although the complete regulatory pathway involved in thermosensing remains elusive. We establish that an increase in temperature from 22˚C to 28˚C induces upregulation and activation of MITOGEN-ACTIVATED PROTEIN KINASE 4 (MPK4) in Arabidopsis (Arabidopsis thaliana), subsequently leading to the phosphorylation of PIF4. Phosphorylated PIF4 represses the expression of ACTIN-RELATED PROTEIN 6 (ARP6), which is required for mediating the deposition of histone variant H2A.Z at its target loci. Furthermore, we demonstrate that variations in ARP6 expression in PIF4 phosphor-null and phosphor-mimetic seedlings affect hypocotyl growth at 22˚C and 28˚C by modulating the regulation of ARP6-mediated H2A.Z deposition at the loci of genes involved in elongating hypocotyl cells. Interestingly, the expression of MPK4 is also controlled by H2A.Z deposition in a temperature-dependent manner. Taken together, these findings highlight the regulatory mechanism of thermosensing by which MPK4-mediated phosphorylation of PIF4 affects ARP6-mediated H2A.Z deposition at the genes involved in hypocotyl cell elongation.

Mechanistic Insights on the Formation of a Carbodiimide Ion from Urea in La2O2NCN Synthesis Based on the "Proanion" Strategy.

This study affords mechanistic insights into the formation mechanism of carbodiimide ions (NCN2-) from urea during the synthesis of La2O2NCN by employing the "proanion" strategy without using NH3 gas. It is a safer, cost-effective, and environmentally friendly approach. Urea, acting as a proanion, decomposes upon heating, facilitating conversion to NCN2-. This work meticulously examines the phase transitions and identifies intermediate species formed during the reaction using in situ X-ray diffraction, Fourier transform infrared spectroscopy, and thermogravimetric-differential thermal analysis-mass spectrometry. The findings present a detailed mechanism in which urea initially decomposes at 140 °C, releasing HNCO, which reacts with La(OH)3 to immobilize NCO- species on the surface of La(OH)3. As the temperature reaches approximately 400 °C, these NCO- anions transform into NCN2- anions by releasing CO2 gas, resulting in the formation of an amorphous phase rich in NCN2-. Following further heating to 600 °C, La2O2NCN crystallizes, enhancing its crystallinity as the temperature increases. These findings elucidate the formation mechanism of La2O2NCN, introduce the "proanion method" for the alternative synthesis of metal (oxy)carbodiimides, and expand their potential for applications as functional materials.

Phonon transport in vacancy induced defective stanene/hBN van der Waals heterostructure

In this study, Non-Equilibrium Molecular Dynamics (NEMD) simulation is employed to investigate the phonon thermal conductivity (PTC) of Sn/hBN van der Waals heterostructures with different vacancy-induced defects. We deliberately introduce three types of vacancies in Sn/hBN bilayer point vacancies, bivacancies, and edge vacancies at various concentrations ranging from 0.25% to 2%, to examine their effects on PTC across temperatures from 100 K to 600 K. The key findings of our work are (i) PTC declines monotonically with increasing vacancy concentration for all types of vacancies, with a maximum reduction of ∼62% observed at room temperature compared to its pristine form. (ii) The position of defects has an impact on PTC, with a larger decrease observed when defects are present in the hBN layer and a smaller decrease when defects are in the Sn layer. (iii) The type of vacancy also influences PTC, with point vacancies causing the most substantial reduction, followed by bivacancies, and edge vacancies having the least effect. A 2% defect concentration results in a ∼62% decrease in PTC for point vacancies, ∼51% for bivacancies, and ∼32% for edge vacancies. (iv) Finally, our results indicate that for a given defect concentration, PTC decreases as temperature increases. The impact of temperature on thermal conductivity is less pronounced compared to the effect of vacancies for the defective Sn/hBN bilayer. The presence of vacancies and elevated temperatures enhance phonon-defect and phonon–phonon scattering, leading to changes in the phonon density of states (PDOS) profile and the distribution of phonons across different frequencies of Sn/hBN bilayer, thus affecting its thermal conductivity. This work offers new insights into the thermal behavior of vacancy-filled Sn/hBN heterostructures, suggesting potential pathways for modulating thermal conductivity in bilayer van der Waals heterostructures for applications in thermoelectric, optoelectronics, and nanoelectronics in future.

The space of secondary α phase significantly affects the mechanical properties of metastable β-type Ti-4V-2Mo-2Fe alloy

In this study, the evolution of the α phase precipitated from metastable β-type Ti-4V-2Mo-2Fe alloy under various aging conditions and its impact on mechanical properties were investigated. With the increase of aging temperature and time, the yield strength of the alloy decreases from the highest 1435 MPa to 995 MPa, and the elongation increases from 3 % to 14 %. Comparing with the volume fraction of αs, the space of αs was identified as the principal factor affecting the alloy’s mechanical properties. The contribution of αs to strength increases as the αs spacing decrease, while elongation improves with the αs spacing increases.