Firing Temperature Research Articles

Research on tunnel vehicle fire temperature field simulation considering the latent heat of vaporization inside concrete linings

The high temperatures and non-uniform temperature fields caused by fires can lead to the rapid failure of linings, severely affecting tunnel safety. To obtain the temperature distribution of the lining under different fire conditions, simulation research is conducted by CFD technology. First, the fire resistance test of lining is simulated, and a furnace temperature simulation method based on PID control and a lining heat transfer model considering the latent heat of vaporization (LHV) are proposed. Second, the experimentally verified method is applied to a full-scale tunnel model to study the vehicle fire temperature field considering the LHV. The results show that the method based on the PID control can accurately simulate the furnace temperature. By introducing a LHV energy source, the 100 °C temperature plateau within the lining can be effectively simulated to prevent prematurely determining component failure. Compared to traditional methods, the lining-gas heat exchange boundary considering the LHV is more accurate. The temperature rise at the lining surface and rebar is slower, with maximum temperature differences of 80 K and 125 K, respectively. The aim of this research is to provide a complete temperature rise and fall process for the fire protection analysis and design of tunnel linings.

Revisiting the Correlation Between the Valdivia and San Pedro Ceramic Complexes (Based on Technological Characteristics)

This article presents the results of a study of ceramics associated with the Valdivia and San Pedro complexes at the Real Alto site, southwestern Ecuador. The test sample, studied in 2022, includes fragments of vessels from two morphological and functional groups, relating to the first two phases of the Valdivia culture (bowls and pots) and those representing the San Pedro complex (vessels with necks and a bowl). A comparative analysis was based on identified technological indicators marking various stages of pottery manufacture. Certain differences are seen in the composition of paste and in the hand-shaping of the vessels. Significant differences were revealed in surface treatment and decoration. This is evidenced by the use of colored and plain coating, high-quality solid or matte striped polishing, and complexity of decoration. Distinctive features of firing include the use of different kilns and various atmospheric modes. Parallels include broadly similar firing temperatures. The technological difference between the two morphological and functional groups of the Valdivia complex is that bowls were manufactured with more complex and labor-consuming techniques, whereas pots are technologically somewhat similar to those from San Pedro. Radiocarbon dates (4640–4450 BP) suggest that the two traditions coexisted. Differences may reflect their cultural distinctness.

Enhancing resilience in urban utility tunnels power transmission systems: Analysing temperature distribution in near-wall cable fires for risk mitigation

Urban utility tunnels are integral to the underground power transmission systems of cities. Enhancing the understanding of cable fire hazards within these tunnels is pivotal for fostering risk-resilient underground environments. This study delves into the temperature distribution characteristics of near-wall cable fires in urban utility tunnels. Employing a reduced-scale utility tunnel model, a series of fire experiments were conducted, focusing on the safety monitoring of horizontally arranged cables. Cone calorimeter tests were initially performed to ascertain the heat release rate of cable fires. The study meticulously considered cable spatial position parameters, such as cable height and near-wall distance, as dependent variables, and monitored real-time temperature changes within the utility tunnel under various fire scenarios.The findings reveal that the cable’s proximity to the wall significantly influences the fire temperature field. For instance, when a fire near the sidewall (at 1 cm) is compared to one in the middle of the tunnel (at 20 cm), the ceiling maximum temperature is reduced by 38.9 %. The sidewall’s limiting effect diminishes fire energy release, moderates vertical temperature decay, and enhances longitudinal temperature attenuation. The study introduces dimensionless mathematical models that account for the sidewall effect, quantifying the characteristics of fire-induced smoke temperature distribution in utility tunnels, such as ceiling maximum temperature rise, vertical smoke temperature profile, and longitudinal smoke temperature decay. The models’ predicted values closely align with the experimental results.These insights are pivotal for integrating cable numbers and spatial positioning in scenario-based fire prevention and mitigation strategies. The study’s implications extend to the design and operation of urban utility tunnels, emphasizing the need for strategic cable placement and the potential for mathematical models to inform risk mitigation measures. The research contributes to the advancement of sustainable urban development by providing a framework for enhancing the safety and resilience of critical infrastructure against fire hazards.

Iron Age ceramics from Thracian rock-cut complexes from Bulgaria – Mineral magnetic relics of technological production and use

The Gluhite kamani Thracian rock-cut complex in the Eastern Rhodopes Mountain is famous with its more than 500 rock niches carved in the rock at heights up to 20 m. Continuous habitation starting from the final Chalcolithic (the second quarter of the 4th millenium BCE) until the Late Classical – Early Hellenistic period (late 5th – 4th century BCE) provides unique opportunity for studying diachronic changes in pottery production and use. In this contribution, systematic analysis of a collection of 135 ceramic sherds from five archaeological periods at the site was carried out using a combined mineral magnetic and geochemical approach. Magnetic susceptibility (χ), frequency-dependent magnetic susceptibility (χfd%) and firing temperature (Tfire), determined using the magnetic susceptibility method, were combined with data from elemental XRF analyses. Thermomagnetic measurements, employed for identification of magnetic minerals revealed the dominant presence of (titano)magnetite with low Ti-content and/or a fraction of single-domain magnetite and in few cases hematite. Although varying in a wide range, median χ values of ceramic sherds from the Early Iron Age (EIA) periods show similar distribution, while for Late Iron Age (LIA) with the introduction of the wheel-thrown pottery, χ values are higher, presumably due to decreased amount of silica-rich clastics in the clay. Concurrently, χfd% values decrease in ceramics from the LIA, indicating predominant presence of stable single-domain magnetite in the iron oxide composition of the ceramics. Firing temperatures (Tfire) estimations display a systematic pattern of two groups – higher (Tfire between 760 and 800 °C) and lower (Tfire ∼ 400–––600 °C). During the EIA periods both Tfire groups are present, characterized by systematic gradual decrease of the median value of the low Tfire when going from EIA1 towards the EIA2. Wheel-thrown pottery from the LIA show low Tfire ∼ 400 °C only. Based on the differences in thermomagnetic properties of ceramics, their magnetic parameters and Tfire estimates, two possible hypotheses are suggested to explain the observed changes in EIA ceramic characteristics: i) utilization of two differently sourced clay materials (illite-dominated and montmorillonite-dominated) for production of ceramics fired at higher and lower temperatures, respectively; and ii) utilization of one raw clay source, while using two firing regimes – firing at higher temperature for prolonged time, and fast firing to high temperature with successive stage of longer firing at lower temperature. Differences in thermomagnetic properties of wheel-thrown pottery from the LIA period leads to the assumption for utilization of diverse clay source for their production, as compared clay sources for the Early Iron Age periods.

Theoretical model of the three - Stage parameter fire curve considering the contribution of combustible materials

Fire resistance is a critical factor constraining structural safety performance, specifically for Cross Laminated Timber (CLT) structures. Due to wood being a combustible material, the exposed wood will participate in combustion, increasing the fire load density and char rates, thereby causing more severe fire risks. In order to investigate the effect of exposed wood on fire temperature, this paper summarized 32 char rate data from 11 CLT room fire tests and fitted the relationship between wood exposure area and char rate, establishes a theoretical formula for the proportion of fire load burned outside the room to the total fire load, and it also establishes a theoretical formula for the three-stage parameter fire curve, which considers the contribution of combustible materials to fire load and char rate, as well as the transition from ventilation controlled to fuel controlled during the cooling stage of the fire. The accuracy of the three-stage parameter fire curve was verified through comparison with test results. Sensitivity analysis was conducted on the main parameters that affect the three-stage parameter fire curve. The results showed that the degree of influence of each factor on the maximum temperature of the fire and the time to reach the maximum temperature was as follows: fire load density > vent height > vent width > wood exposure area.

Arsenic leaching from ceramic water filters: Effects of firing temperature and influent conditions

Ceramic water filters (CWFs), fabricated using local sourced clay, have been widely acknowledged as sustainable and effective point-of-use (POU) drinking water treatment approach. However, arsenic leaching from CWFs poses a potential risk of arsenic exposure, thereby limiting their safe application. In this study, CWFs were made from red clay to investigate the critical roles of firing temperatures (900–––1050 °C), solution chemistry conditions (i.e., pH, Na+, Ca2+), as well as operational conditions on arsenic leaching. Overall, arsenic leaching from CWFs followed a flushing-out pattern, with up to 61 % of total leachable arsenic released during initial first 100-pore-volume filtration. Specially, higher firing temperature led to lower initial arsenic leaching but higher cumulative leaching from resulting CWFs over long-term filtration. Feed solutions at circumneutral pH, with low Na+ or high Ca2+ resulted in less cumulative arsenic leaching, while POU operational conditions (intermittent operation and fluctuating flow rate) had negligible effects. Mechanism investigation found that firing process enhanced arsenic mobility, i.e., the exchangeable arsenic fraction was only 5.34 % in unfired clay but 26.7 % − 37.3 % in CWFs. The enhanced arsenic mobility was mainly caused by the thermal transformation of source clay, especially the thermal alteration in the hematite lattice. Our findings provide not only new insights into the process controlling arsenic leaching from CWFs but also shed light on ways to mitigate leaching, thereby improving the safety of CWFs application.

Mullite 3D Printed Humidity Sensors

Mullite substrates with two different porosities were 3D printed, and tested as humidity sensors. To evaluate the effects of porosity on humidity sensitivity, the samples were sintered at 1400 °C (Sensor 1) and 1450 °C (Sensor 2). The sensors were tested in a range from 0% to 85% relative humidity (RH) at room temperature. When exposed to water vapor at room temperature, the impedance value dropped down from 155 MΩ under dry air to 480 kΩ under 85 RH% for Sensor 1 and from 115 MΩ under dry air to 410 kΩ for Sensor 2. In addition, response time and recovery time were below 2 min, whatever the firing temperature, when RH changed from 0% to 74%. Finally, tests carried out involving ammonia, methane, carbon dioxide and nitrogenous oxide, as well as ethanol and acetone, showed no interference.

Zn-Doped Calcium Copper Titanate Synthesis via Microwave-Assisted Technique

Electroceramic material has become significant in the recent development of electronic parts such as capacitors, resonators, and sensors. The previous study on calcium copper titanate (CaCu3Ti4O12, CCTO) showed that CCTO exhibits a colossal dielectric constant, up to 105 for bulk materials using a conventional synthesis route (calcine and sinter at 900 - 1040? for 9 - 12 hours). The high firing temperature and longer reaction time were undesirable because they would increase production costs and be time-consuming. Alternately, research findings on doping with donor or acceptor elements were proven to be an effective technique for improving dielectric properties. Thus, the Zn-doping (Zn= 0, 1, and 3 mol%) method increased the dielectric constant in CCTO. The study successfully synthesized Zn-doped CCTO at 700? with a soaking time of 40 minutes using a microwave-assisted technique (calcined and sintered). Then, the samples were characterized using XRD and an impedance analyzer. The CCTO crystal formation was examined through an XRD pattern, and semi-quantitative analysis indicated that 1 mol% of Zn-doped recorded optimum formation reaction after calcining (56.5 wt%) and as-sinter (70.3 wt%). However, despite the low formation of CCTO crystal structure in 3 mol% of Zn-doped (34.9 wt%), it has the highest dielectric constant, and the dielectric loss was reduced at high frequency.

Fire season matters for midstory hardwood control: Impacts of fire season and firing technique on plant communities

In the southeastern USA, lack of historical fire regimes often leads to hardwood encroachment into early successional plant communities and managed pine stands, reducing wildlife value and timber yields. Land managers lack information on how firing technique interacts with fire season to influence plant communities. We designed an experiment to quantify these interactions in east-central Mississippi with pairs of 4 m × 8 m plots randomly assigned a backing and heading fire in each of three seasons: February (Feb), May–June (May/Jun), and September–October (Sep/Oct). We used thermocouples to monitor fire temperature and tagged midstory trees to monitor response. We lit heading fires with an 18–25 kph wind generated by a backpack blower and backing fires into the ambient wind. Despite backing fires producing longer residence times than heading fires and raising temperature above the lethal threshold of 60 °C an average of 54 s longer, firing technique did not influence midstory response one growing season post-fire. Backing and heading fires produced similar maximum temperatures. For both firing techniques, May/Jun resulted in the highest midstory mortality rates which were 3-fold greater than Sep/Oct and 4-fold greater than Feb. Among all three fire seasons, trees with a 2.5 cm diameter at breast height (DBH) had approximately a 75% chance of top-kill which decreased to <20% as trees approached 6.5 cm DBH. We found no effects of fire season on fire temperature, rate of spread, flame height, or percent crown scorch. We found no significant interactions between fire season and firing technique. Understory analysis revealed Sep/Oct produced the greatest increase in forb coverage, May/Jun resulted in the most grass coverage, and Feb produced the most brambles (Rubus spp.). On sites with similar species, weather, and fuel conditions to ours, land managers should emphasize fire season over firing technique for midstory control and understory manipulation. Where midstory hardwood control with fire is a priority, fire return intervals should be frequent enough to prevent trees from exceeding 2.5 cm DBH to avoid trees escaping fire's reach. These data can help managers reduce midstory competition with crop trees and promote understory development for wildlife.

Exploring handmade pottery traditions and Early Iron Age Iberian networks through the site of La Fonteta (Alicante, Spain)

The Phoenician colony of La Fonteta in southeastern Iberia holds significant importance for understanding Phoenician settlement patterns in the region. While previous research has primarily focused on wheel-thrown ceramics indicative of the new technological advancements and trade networks implemented after the Phoenician arrival, handmade ceramics have been somewhat overlooked despite their prevalence in the Early Iron Age (EIA) contexts. Our study, based on the analysis of 36 individuals from recent excavations at La Fonteta, sheds light on the technological aspects (temper choice and estimated firing temperature) and mobility patterns associated with handmade ceramics in this context. Contrary to previous assumptions, our findings indicate that handmade ceramics played a crucial role in regional and broader exchange systems, possibly with limited ties to wheel-thrown ceramics. Moreover, regional mobility seems to have been prominent, likely stemming from local networks and technological frameworks established during the preceding Late Bronze Age (LBA) period.

DETERMINATION OF THE CLASS B FIRE EXTINGUISHING PARAMETERS USING SPRAYED WATER

Sprayed water is a versatile tool for localising and extinguishing fires of various types. When water evaporates, its volume increases by 1700 times, resulting in the dilution of combustible components with non-combustible water vapour. The study aims to determine the parameters of extinguishing class B fires using sprayed water by obtaining analytical dependencies for these parameters. The paper derives an expression for the extinguishing temperature of class B fires when extinguished with sprayed water, using Semenov’s conditions. The process of liquid combustion is considered as diffusion. The study shows that the extinguishing temperature of this type of fire is a function of the activation energy of the burning liquid and the initial temperature (at the time of sprayed water supply) of the flame. A parameter of this function is the universal gas constant. The authors constructed a graph showing the area of change in the fire extinguishing temperature. The difference between the initial flame temperature and the fire extinguishing temperature belongs to the range of (80÷120) °C. Using the transition function of class B fire, the study derives an expression for its extinguishing time, which depends on the initial flame temperature, activation energy, and the multiplicative component in the form of a fire time constant. For the relative extinguishing time, the authors constructed the area of change in this parameter depending on the activation energy and the initial temperature. It shows that the value of the extinguishing time of such a fire is (0.28÷0.32) of the value of the constant fire time. The paper presents an expression for the minimum value of the intensity of the sprayed water supply, which ensures extinguishing a class B fire. This intensity of the supply of sprayed water, reduced to the value of the fire transmission coefficient, is determined by the initial temperature of the flame and the activation energy of the liquid that burns. The authors constructed the area of change of this fire extinguishing parameter. It shows that the minimum value of the intensity of the supply of sprayed water belongs to the range (3.8÷7.8) per unit of the fire transmission coefficient. Keywords: fire, fire parameters, sprayed water.

Experimental study on thermal bridge effect of steel-concrete-steel tunnel elements under fireproof board insulation schemes

Steel embedded parts welded on the surface of steel-concrete-steel tunnel elements serve as thermal bridges in tunnel fires. Their influence on temperature field and macroscopic thermal damage of steel-concrete-steel structure were investigated through fire tests, and their heat transfer forms were analyzed. Then, a thermal bridge disposal scheme was proposed and examined. The results show that steel embedded parts significantly cause an increase and an uneven distribution of steel shell temperature in tunnel fires. As time exposed to fire increases, the extent and range of these influences grow. Thermal bridges raise the average temperature by 45.2 % inside the steel-concrete-steel structure, worsen the unevenness of temperature distribution in horizontal and vertical directions. Thermal bridges worsen surface macroscopic damage, lengthening cracks by more than 32.5 % and widening them by more than 22.6 times. Within a distance of 30 cm from the embedded part, heat provided by embedded parts accounts for over 79.9 % of the steel shell's total heat, and heat conveyed along the steel shell through thermal conduction accounts for over 53.7 %. GX-3 high-temperature adhesive is an effective method for thermal bridge treatment. These detailed findings offer new insights into the design of fire insulation schemes for the steel-concrete-steel structure.

Archaeometric Studies on Bricks from the Stratonikeia Ancient City in Caria

The ancient city of Stratonikeia is located within the territory of Eskihisar Neighbourhood in Yatağan District of Muğla Province. Excavations have been undertaken at the site since 1977. Settlement at the site of the ancient city is understood to go back to the second millennium BCE. At the site it is possible to see structures from a wide time span ranging from Classical Period through the twentieth century. Within the scope of the present study, a total of 25 samples were taken from seven structures within the ancient city of Stratonikeia. This study aims to cast light onto the archaeometric characters of the brick samples, to retrieve information on their production technologies, obtain data regarding their firing temperatures and their production sites as local or imports. The samples were investigated using stereomicroscope, optical microscope, color analysis, XRF, XRD, statistical and SEM-EDS methods. Various analyses led to compatible results and the brick samples were categorized into three main groups and one subgroup. It was noted that most of the samples were fired at 750-850oC and all of them were produced with clay taken from similar clay deposits.

Investigation on Effects and Properties of Concrete Structure after Exposed to Fire

Abstract: The integrity and strength of the materials used in reinforced concrete structures are highly influenced by their exposure environment. Exposing the building materials to high temperature changes their performance. The change in the performance is a result of the change in the material properties. When subjecting a building material to fire, the occurring damage depends on the severity of the fire in terms ofthe fire temperature and time of exposure. This study investigates the effects of fireexposure on the set of RC beams. Through controlled experiments, varyingtemperatures from 3000C to 7000C areapplied to RC beams, analyzing changes in compressive strength, spalling, andmicrostructure by using rebound hammer,UPV meter and applying two-point loading in UTM. Results indicate a significantreduction in compressive strength with increasing fire temperature, attributed to thermal degradation of cement paste and aggregate. Additionally, changes inmicrostructure, such as pore structure alterations and formation of cracks, are observed. Also, few of RC beams were strengthened using GFRP sheets as a U- shaped wrapping to entire beam and U- shaped wrapping at certain intervals. The strengthened specimens are again tested in UTM for two-point loading, the results of the tests showed the feasibility of rehabilitating RC beams exposed to fire using GFRP plates.U-shaped wrapping to entire beam showed the good performance

Exploring the Composition of Egyptian Faience

Egyptian Faience, a revolutionary innovation in ancient ceramics, was used for crafting various objects, including amulets, vessels, ornaments, and funerary figurines, like shabtis. Despite extensive research, many aspects of ancient shabti production technology, chemistry and mineralogy remain relatively understudied from the 21st to the 22nd Dynasty, belonging to a recovered 19th-century private collection. The fragments’ origin is tentatively identified in the middle Nile valley in the Luxor area. Our study focused on a modest yet compositionally interesting small collection of shabti fragments to provide information on the glaze’s components and shabti’s core. We found that the core is a quartz and K-feldspars silt blended with an organic component made of plastic resins and vegetable fibres soaked with natron. The studied shabti figurines, after being modelled, dried, and covered with coloured glaze, were subjected to a firing process. Sodium metasilicate and sulphate compounds formed upon contact of the glaze with the silica matrix, forming a shell that holds together the fragile inner matrix. The pigments dissolved in the sodic glaze glass, produced by quartz, K-feldspars, and natron frit, are mainly manganese (Mn) and copper (Cu) compounds. The ratio Cu2O/CaO &gt; 5 produces a blue colour; if &lt;5, the glaze is green. In some cases, Mg and As may have been added to produce a darker brown and an intense blue, respectively. Reaction minerals provided information on the high-temperature firing process that rapidly vitrified the glaze. These data index minerals for the firing temperature of a sodic glaze, reaching up to a maximum of 1050 °C.

Experimental and numerical study on extended endplate beam-column joints after high temperature to resist progressive collapse

This paper presents experimental and numerical investigations on the collapse-resisting behavior of extended endplate beam-column joints after high temperatures. The failure patterns and structural responses of extended endplate (EP) joints after high temperature to resist progressive collapse were first described, and then the effects of fire temperature and temperature duration on their collapse resistance mechanisms were also analyzed in detail. The test results demonstrate that all specimens withdrew from work owing to the serious deformation of endplate bolt holes or the brittle fracture of high-strength bolts, resulting in the catenary mechanisms of EP joints not being adequately developed. Compared with previous studies, it is shown that the fire temperature exerts the most significant effects on the carrying capacities and deformability of EP joints, and the collapse resistance of corresponding assemblies is most sensitive to the fire temperature. However, the temperature durations have an insignificant influence on the development of flexural mechanism resistance, especially for those after 600 °C and 800 °C. Moreover, the corresponding refined FE models in consideration of the damage and fracture of ductile metals have been established to reproduce the structural response of specimens after high temperature. To improve the post-fire collapse-resisting performance of assemblies, both the lateral plate reinforcement and welding reinforcement methods were proposed and compared with the assistance of validated FE models. From a practical viewpoint, the reinforcement with lateral plates is determined as a superior technique for post-fire EP joints against progressive collapse.

Geochemical implications of uranium-bearing thucholite aggregates in the Upper Permian Kupferschiefer shale, Lubin district, Poland

New inorganic and organic geochemical data from thucholite in the Upper Permian (Wuchiapingian) Kupferschiefer (T1) shale collected at the Polkowice-Sieroszowice Cu-Ag mine in Poland are presented. Thucholite, which forms spherical or granular clusters, appears scattered in the T1 dolomitic shale at the oxic-anoxic boundary occurring within the same shale member. The composition of thucholite concretions and the T1 shale differs by a higher content of U- and REE-enriched mineral phases within the thucholite concretions compared to the T1 shale, suggesting a different mineralising history. The differences also comprise higher Ntot, Ctot, Htot, Stot contents and higher C/N, C/S ratios in thucholite than in the T1 shale. The hydrocarbon composition of the thucholite and the surrounding T1 shale also varies. Both are dominated by polycyclic aromatic compounds and their phenyl derivatives. However, higher abundances of unsubstituted polycyclic aromatic hydrocarbons in the thucholite are indicative of its pyrogenic origin. Pyrolytic compounds such as benz[a]anthracene or benzo[a]pyrene are more typical of the thucholite than the T1 shale. Microscopic observations of the thucholite and its molecular composition suggest that it represents well-rounded small charcoal fragments. These charcoals were formed during low-temperature combustion, as confirmed by semifusinite reflectance values, indicating surface fire temperatures of about 400 °C, and the absence of the high-temperature pyrogenic polycyclic aromatic hydrocarbons. Charred detrital particles, likely the main source of insoluble organic matter in the thucholite, migrated to the sedimentary basin in the form of spherical carbonaceous particulates, which adsorbed uranium and REE in particular, which would further explain their different contents and sorption properties in the depositional environment. Finally, the difference in mineral content between thucholite and the T1 shale could also have been caused by microbes, which might have formed biofilms on mineral particles, and caused a change in the original mineral composition.

Development of bio-based lightweight and thermally insulated bricks: Efficient energy performance, thermal comfort, and CO2 emission of residential buildings in hot arid climates

This study explores the viability of using industrial wastewater sludge (IWWS), generated by the mycelium treatment of dyeing wastewater, for the fabrication of lightweight and thermally insulating bricks. The pulverized IWWS was used at various replacement ratios of 0, 5, 10, 15, and 20 wt% of clay. The mixture was subjected to firing temperatures of 700, 800, and 900 °C. The effect of applying IWWS to the brick characteristics is assessed through an examination of the physico-mechanical and thermal properties. The utilization of IWWS resulted in a significant enhancement in apparent porosity (34.4 %), cold water absorption (25.6 %), boiling water absorption (28.5 %), linear drying shrinkage (5.1 %), and linear firing shrinkage (7.9 %) using 20 % IWWS at 900 °C. Furthermore, the density, compressive strength, and thermal conductivity were reduced as the substitution IWWS ratio increased, reaching up to 1662.9 kg/m3, 11.56 MPa, and 0.198 W/m.K., respectively, using 20 wt% IWWS at 900 °C. The effect of fabricated fired bricks (FBs) on the thermal insulation, CO2 emissions, and energy consumption of residential buildings was tested. This is accomplished by using energy modeling tools, such as Honeybee, Ladybug, and Climate Studio (Grasshopper plugins), in addition to Galapagos for optimizing wall design. The suggested wall design is being used in a communal residential building located in two distinct climatic regions, namely Cairo in Egypt and Jazan in Saudi Arabia. According to the projected mean vote (PMV) and anticipated percentage of discontent (PPD) measures, the utilization of fabricated FBs as wall materials exhibits significant improvements in thermal comfort. Furthermore, they lead to a 6 % and 7 % drop in CO2 emissions in Cairo and Jazan cities, respectively, as well as a significant 38.8 % and 39 % reduction in energy consumption in Cairo and Jazan cities, respectively. Therefore, the use of fabricated FBs demonstrates itself as a feasible and environmentally friendly choice for building construction.

Effects of polishing or glazing on surface roughness and microhardness after milling CAD-CAM ceramic materials

Objective: This study aimed to evaluate the surface roughness and microhardness of CAD-CAM ceramic blocks after different surface finishing protocols. Materials and methods: Three ceramics were evaluated: lithium disilicate, leucite-reinforced feldspathic and zirconia-reinforced lithium silicate. Ninety specimens were obtained and distributed into 3 groups (n=10): polishing (specimens were polished with an abrasive rubber kit); conventional glaze (according to the manufacturer's recommendations); and, extended glaze (the specimens were kept for 15 minutes at maximum firing temperature and the furnace was kept closed until reaching 200ºC). In all specimens, a drill was used to simulate the milling machine and thus obtain the initial roughness. Surface roughness was evaluated before and after the finishing protocols, while Vickers microhardness was performed only after the finishing protocols. Roughness data were analyzed to repeated measures two-way ANOVA and Bonferroni post-hoc test and ANOVA with Welch correction and Games-Howell test were used to analyze microhardness data (α = 0.05). Results: Both conventional and extended glazes showed greater smoothness for lithium disilicate and zirconia-reinforced lithium silicate ceramics, while for Empress, extended firing of the glaze provided greater surface smoothness. Regarding microhardness, there was no statistically significant difference among the protocols for the same material. The conventional glaze group made from lithium disilicate did not show a significant difference in microhardness values in relation to the other groups. Conclusion: The application of glaze improves the surface smoothness of the ceramics after milling procedure. There is no change in microhardness with different surface finishing protocols.

Fabrication of Lead-Zinc Tailings Sintered Brick and Its Effect Factors Based on an Orthogonal Experiment.

The existence of lead-zinc tailings threatens the social and ecological environment. The recycling of lead-zinc tailings is important for the all-round green transformation of economic society. In this study, the possibility of fabricating sintered ordinary bricks with lead-zinc tailings was studied based on orthogonal experimentation, and the phase composition and micromorphology of sintered products were analyzed by X-ray diffraction (XRD) and scanning electron microscope (SEM). With lead-zinc tailings as the main material, and clay and fly ash as additives, the effect of clay content, forming pressure, sintering temperature, and holding time on physical properties of sintered bricks was analyzed. The results show that clay content and sintering temperature have a major effect on compressive strength, while sintering temperature and holding time play an important role in water absorption. During sintering, mica, chlorite, and other components in lead-zinc tailings are decomposed to form albite, hematite, maghemite, and anhydrite, which play a role in the strength of bricks. The optimal process parameters were found to be a ratio of lead-zinc tailings:clay:fly ash = 6:3:1, forming pressure of 20 MPa, firing temperature of 1080 °C, and holding time of 60 min. The corresponding compressive strength and water absorption were 34.94 MPa and 16.02%, which meets the Chinese sintered ordinary bricks standard (GB/T 5101-2017).