Sequential Task Research Articles

Enhancing Fault Diagnosis in Industrial Processes through Adversarial Task Augmented Sequential Meta-Learning

This study introduces the Adversarial Task Augmented Sequential Meta-Learning (ATASML) framework, designed to enhance fault diagnosis in industrial processes. ATASML integrates adversarial learning with sequential task learning to improve the model’s adaptability and robustness, facilitating precise fault identification under varied conditions. Key to ATASML’s approach is its novel use of adversarial examples and data-augmentation techniques, including noise injection and temporal warping, which extend the model’s exposure to diverse operational scenarios and fault manifestations. This enriched training environment significantly boosts the model’s ability to generalize from limited data, a critical advantage in industrial applications where anomaly patterns frequently vary. The framework’s performance was rigorously evaluated on two benchmark datasets: the Tennessee Eastman Process (TEP) and the Skoltech Anomaly Benchmark (SKAB), which are representative of complex industrial systems. The results indicate that ATASML outperforms conventional meta-learning models, particularly in scenarios characterized by few-shot learning requirements. Notably, ATASML demonstrated superior accuracy and F1 scores, validating its effectiveness in enhancing fault-diagnosis capabilities. Furthermore, ATASML’s strategic incorporation of task sequencing and adversarial tasks optimizes the training process, which not only refines learning outcomes but also improves computational efficiency. This study confirms the utility of the ATASML framework in significantly enhancing the accuracy and reliability of fault-diagnosis systems under diverse and challenging conditions prevalent in industrial processes.

Probabilistic Chain-Enhanced Parallel Genetic Algorithm for UAV Reconnaissance Task Assignment

With the increasing diversity and complexity of tasks assigned to unmanned aerial vehicles (UAVs), the demands on task assignment and sequencing technologies have grown significantly, particularly for large UAV tasks such as multi-target reconnaissance area surveillance. While the current exhaustive methods offer thorough solutions, they encounter substantial challenges in addressing large-scale task assignments due to their extensive computational demands. Conversely, while heuristic algorithms are capable of delivering satisfactory solutions with limited computational resources, they frequently struggle with converging on locally optimal solutions and are characterized by low iteration rates. In response to these limitations, this paper presents a novel approach: the probabilistic chain-enhanced parallel genetic algorithm (PC-EPGA). The PC-EPGA combines probabilistic chains with genetic algorithms to significantly enhance the quality of solutions. In our approach, each UAV flight is considered a Dubins vehicle, incorporating kinematic constraints. In addition, it integrates parallel genetic algorithms to improve hardware performance and processing speed. In our study, we represent task points as chromosome nodes and construct probabilistic connection chains between these nodes. This structure is specifically designed to influence the genetic algorithm’s crossover and mutation processes by taking into account both the quantity of tasks assigned to UAVs and the associated costs of inter-task flights. In addition, we propose a fitness-based adaptive crossover operator to circumvent local optima more effectively. To optimize the parameters of the PC-EPGA, Bayesian networks are utilized, which improves the efficiency of the whole parameter search process. The experimental results show that compared to the traditional heuristic algorithms, the probabilistic chain algorithm significantly improves the quality of solutions and computational efficiency.

Multi-step Transfer Learning in Natural Language Processing for the Health Domain

The restricted access to data in healthcare facilities due to patient privacy and confidentiality policies has led to the application of general natural language processing (NLP) techniques advancing relatively slowly in the health domain. Additionally, because clinical data is unique to various institutions and laboratories, there are not enough standards and conventions for data annotation. In places without robust death registration systems, the cause of death (COD) is determined through a verbal autopsy (VA) report. A non-clinician field agent completes a VA report using a set of standardized questions as guide to identify the symptoms of a COD. The narrative text of the VA report is used as a case study to examine the difficulties of applying NLP techniques to the healthcare domain. This paper presents a framework that leverages knowledge across multiple domains via two domain adaptation techniques: feature extraction and fine-tuning. These techniques aim to improve VA text representations for COD classification tasks in the health domain. The framework is motivated by multi-step learning, where a final learning task is realized via a sequence of intermediate learning tasks. The framework builds upon the strengths of the Bidirectional Encoder Representations from Transformers (BERT) and Embeddings from Language Models (ELMo) models pretrained on the general English and biomedical domains. These models are employed to extract features from the VA narratives. Our results demonstrate improved performance when initializing the learning of BERT embeddings with ELMo embeddings. The benefit of incorporating character-level information for learning word embeddings in the English domain, coupled with word-level information for learning word embeddings in the biomedical domain, is also evident.

Emotion expression salience and racially biased weapon identification: A diffusion modeling approach.

Racial stereotypes are commonly activated by informational cues that are detectable in people's faces. Here, we used a sequential priming task to examine whether and how the salience of emotion (angry/scowling vs. happy/smiling expressions) or apparent race (Black vs. White) information in male face primes shapes racially biased weapon identification (gun vs. tool) decisions. In two experiments (Ntotal = 546) using two different manipulations of facial information salience, racial bias in weapon identification was weaker when the salience of emotion expression versus race was heightened. Using diffusion decision modeling, we tested competing accounts of the cognitive mechanism by which the salience of facial information moderates this behavioral effect. Consistent support emerged for an initial bias account, whereby the decision process began closer to the "gun" response upon seeing faces of Black versus White men, and this racially biased shift in the starting position was weaker when emotion versus race information was salient. We discuss these results vis-à-vis prior empirical and theoretical work on how facial information salience moderates racial bias in decision-making.

Human-like Learning in Temporally Structured Environments

Natural environments have correlations at a wide range of timescales. Human cognition is tuned to this temporal structure, as seen by power laws of learning and memory, and by spacing effects whereby the intervals between repeated training data affect how long knowledge is retained. Machine learning is instead dominated by batch iid training or else relatively simple nonstationarity assumptions such as random walks or discrete task sequences. The main contributions of our work are: (1) We develop a Bayesian model formalizing the brain's inductive bias for temporal structure and show our model accounts for key features of human learning and memory. (2) We translate the model into a new gradient-based optimization technique for neural networks that endows them with human-like temporal inductive bias and improves their performance in realistic nonstationary tasks. Our technical approach is founded on Bayesian inference over 1/f noise, a statistical signature of many natural environments with long-range, power law correlations. We derive a new closed-form solution to this problem by treating the state of the environment as a sum of processes on different timescales and applying an extended Kalman filter to learn all timescales jointly. We then derive a variational approximation of this model for training neural networks, which can be used as a drop-in replacement for standard optimizers in arbitrary architectures. Our optimizer decomposes each weight in the network as a sum of subweights with different learning and decay rates and tracks their joint uncertainty. Thus knowledge becomes distributed across timescales, enabling rapid adaptation to task changes while retaining long-term knowledge and avoiding catastrophic interference. Simulations show improved performance in environments with realistic multiscale nonstationarity. Finally, we present simulations showing our model gives essentially parameter-free fits of learning, forgetting, and spacing effects in human data. We then explore the analogue of human spacing effects in a deep net trained in a structured environment where tasks recur at different rates and compare the model's behavioral properties to those of people.

Research on the Messenger UAV Mission Planning Based on Sampling Transformation Algorithm

In recent years, there has been a significant development in unmanned platform technologies, specifically unmanned ground vehicles (UGVs) and unmanned aerial vehicles (UAVs). As a result, their application scenarios have expanded considerably. Unmanned platforms are considered integral components of the Internet of Things system. However, certain challenges arise when dealing with specialized tasks, such as navigating complex urban low-altitude terrain with multiple obstacles and limited communication capabilities. These challenges can greatly impact the efficiency of the system due to information isolation. To address this issue, a messenger drone mechanism is introduced in this paper, which utilizes air superiority to facilitate indirect communication between unmanned platforms. Additionally, a task sequence planning algorithm based on sampling transformation is designed. This algorithm efficiently assigns the drone to mobile UGVs by discretely sampling their paths and considering the UAV-UGV motion relationship. By transforming the problem into an asymmetric traveler problem, it allows for a fast solution. Finally, the effectiveness of the algorithm is verified through comparative analysis in different scenarios.

Probing the limit of hydrologic predictability with the Transformer network

For a number of years since their introduction to hydrology, recurrent neural networks like long short-term memory (LSTM) networks have proven remarkably difficult to surpass in terms of daily hydrograph metrics on community-shared benchmarks. Outside of hydrology, Transformers have now become the model of choice for sequential prediction tasks, making it a curious architecture to investigate for application to hydrology. Here, we first show that a vanilla (basic) Transformer architecture is not competitive against LSTM on the widely benchmarked CAMELS streamflow dataset, and lagged especially prominently for the high-flow metrics, perhaps due to the lack of memory mechanisms. However, a recurrence-free variant of the Transformer model obtained mixed comparisons with LSTM, producing very slightly higher Kling-Gupta efficiency coefficients (KGE), along with other metrics. The lack of advantages for the vanilla Transformer network is linked to the nature of hydrologic processes. Additionally, similar to LSTM, the Transformer can also merge multiple meteorological forcing datasets to improve model performance. Therefore, the modified Transformer represents a rare competitive architecture to LSTM in rigorous benchmarks. Valuable lessons were learned: (1) the basic Transformer architecture is not suitable for hydrologic modeling; (2) the recurrence-free modification is beneficial, so future work should continue to test such modifications; and (3) the performance of state-of-the-art models may be close to the prediction limits of the dataset. As a non-recurrent model, the Transformer may bear scale advantages for learning from bigger datasets and storing knowledge. This work lays the groundwork for future explorations into pretraining models, serving as a foundational benchmark that underscores the potential benefits in hydrology.

Impaired sleep-dependent memory consolidation predicted by reduced sleep spindles in Rolandic epilepsy.

Sleep spindles are prominent thalamocortical brain oscillations during sleep that have been mechanistically linked to sleep-dependent memory consolidation in animal models and healthy controls. Sleep spindles are decreased in Rolandic epilepsy and related sleep-activated epileptic encephalopathies. We investigate the relationship between sleep spindle deficits and deficient sleep dependent memory consolidation in children with Rolandic epilepsy. In this prospective case-control study, children were trained and tested on a validated probe of memory consolidation, the motor sequence task (MST). Sleep spindles were measured from high-density EEG during a 90-minute nap opportunity between MST training and testing using a validated automated detector. Twenty-three children with Rolandic epilepsy (14 with resolved disease), and 19 age- and sex-matched controls were enrolled. Children with active Rolandic epilepsy had decreased memory consolidation compared to control children (p=0.001, mean percentage reduction: 25.7%, 95% CI [10.3, 41.2]%) and compared to children with resolved Rolandic epilepsy (p=0.007, mean percentage reduction: 21.9%, 95% CI [6.2, 37.6]%). Children with active Rolandic epilepsy had decreased sleep spindle rates in the centrotemporal region compared to controls (p=0.008, mean decrease 2.5 spindles/min, 95% CI [0.7, 4.4] spindles/min). Spindle rate positively predicted sleep-dependent memory consolidation (p=0.004, mean MST improvement of 3.9%, 95% CI [1.3, 6.4]%, for each unit increase in spindles per minute). Children with Rolandic epilepsy have a sleep spindle deficit during the active period of disease which predicts deficits in sleep dependent memory consolidation. This finding provides a mechanism and noninvasive biomarker to aid diagnosis and therapeutic discovery for cognitive dysfunction in Rolandic epilepsy and related sleep activated epilepsy syndromes.

Expertise Development at Work: A Workplace Curriculum Perspective in the Domains of Sales Representatives and Leadership Coaches in a German Context

Context: Active engagement and participation in professional practices are an important requirement for expertise development in vocational domains. However, not much is known about how work contexts foster or hinder such expertise development. To further fill this research gap, this study investigates two vocational domains, namely sales representatives and leadership coaches, using the Workplace Curriculum Approach. This approach focuses on three aspects. First, how novices get access to certain tasks. Second, which tasks at work are especially conducive to learning, referred to as pedagogically-rich activities. Third, what knowledge is hard-to-learn through practice alone. By focusing on these three aspects, the Workplace Curriculum Approach helps to understand learning. Method: Eleven highly competent sales representatives and ten highly competent leadership coaches from German organizations participated in an interview study. A thematic qualitative text analysis was applied using deductive and inductive coding. Results: For sales representatives, task sequencing is different across organizations due to structural factors, particularly products, and infrastructure. Ideally, apprentices start by getting to know the customers by selling products on site at a counter and by getting to know the products in the warehouse. challenging interactions with customers on the phone are most conducive to learning. The scope of the product portfolio and the amount of technical knowledge are hard to learn. Leadership coaches are encouraged by peers to start at team leader and smaller team levels before moving on to more senior executives and larger team levels. Weekly team meetings offer important social learning opportunities similar to informal discussions among peers. Methodological and organizational knowledge are hard to learn. Conclusion: Regardless of differences between both domains, the Workplace Curriculum Approach proved useful for analyzing learning and expertise development in the different workplace contexts. The approach proved to be a fairly tangible and easy-to-use tool to investigate how workplaces support expertise development and how workplace learning regimes might be changed to further foster novices’ learning and development. Researchers and practitioners alike can utilize the Workplace Curriculum Approach to analyze learning in different domains in their respective organization. However, individual factors of the learners such as motivation to participate in activities in the workplace are not explicitly included in this approach to investigate professional learning and development. They should be of additional focus in any study interested in vocational expertise development.

Measuring temporal bias in sequential numerosity comparison

While several methods have been proposed to assess the influence of continuous visual cues in parallel numerosity estimation, the impact of temporal magnitudes on sequential numerosity judgments has been largely ignored. To overcome this issue, we extend a recently proposed framework that makes it possible to separate the contribution of numerical and non-numerical information in numerosity comparison by introducing a novel stimulus space designed for sequential tasks. Our method systematically varies the temporal magnitudes embedded into event sequences through the orthogonal manipulation of numerosity and two latent factors, which we designate as “duration” and “temporal spacing”. This allows us to measure the contribution of finer-grained temporal features on numerosity judgments in several sensory modalities. We validate the proposed method on two different experiments in both visual and auditory modalities: results show that adult participants discriminated sequences primarily by relying on numerosity, with similar acuity in the visual and auditory modality. However, participants were similarly influenced by non-numerical cues, such as the total duration of the stimuli, suggesting that temporal cues can significantly bias numerical processing. Our findings highlight the need to carefully consider the continuous properties of numerical stimuli in a sequential mode of presentation as well, with particular relevance in multimodal and cross-modal investigations. We provide the complete code for creating sequential stimuli and analyzing participants’ responses.

Asynchronous modeling workflows in CyberWater with on-demand HPC/Cloud access

Workflow management systems (WfMSs) are commonly used to organize/automate sequences of tasks as workflows to accelerate scientific discoveries. During complex workflow modeling, a local interactive workflow environment is desirable, as users usually rely on their rich, local environments for fast prototyping and refinements before they consider using more powerful computing resources. However, existing WfMSs do not simultaneously support local interactive workflow environments and HPC resources. In this paper, we present a mechanism for on-demand access to remote HPC resources from desktop/laptop-based workflow management software to compose, monitor, and analyze scientific workflows in the CyberWater project. CyberWater is an open-data and open-modeling software framework for environmental and water communities. In this work, we extend the open-model, open-data design of CyberWater with on-demand HPC accessing capacity. In particular, we design and implement the LaunchAgent and JobManager, which can be integrated into a local desktop/Laptop environment to allow on-demand usage of remote HPC resources for computational modeling workflows effectively and efficiently. LaunchAgent manages user authentication to remote resources, prepares computation-intensive or data-intensive tasks as batch jobs, submits jobs to remote resources, and monitors quality of services for users. LaunchAgent interacts seamlessly with other components in CyberWater, providing advantages of user-friendly feature-rich desktop software experience and increased computing power through on-demand HPC/Cloud usage. In our evaluations, we demonstrate how a hydrological modeling workflow that consists of both local and remote tasks can be constructed and show that our new on-demand HPC/Cloud usage helps speed up hydrology workflows while allowing asynchronous HPC/Cloud access from workflows using a desktop graphical user interface.

Path planning of micromanipulators inside an SEM and 3D nanomanipulation of CNTs for nanodevice construction

The concept of a nano-laboratory inside an SEM involves performing a sequence of tasks in a continuous pattern. Robotic systems with nanoscale motion resolution facilitate in-situ manipulation and characterization of nanomaterials to assemble nanodevices inside SEMs. Precise motion control of micromanipulators is required at both macro and micro-nano scales to effectively execute multiple sequential experimental tasks in nanofabrication. However, managing the entire nanomanipulation setup is challenging due to the constricted workspace inside an SEM and the lack of proper process feedback information at that scale. This study explores the application of path planning algorithms to generate a collision-free motion path for the micromanipulators operating within the confined space of an SEM. A MATLAB-based computational tool is first developed using PRM and Dijkstra's path planning algorithms. Considering environmental constraints, the program generates an optimal motion path for the micromanipulators, facilitating automatic configuration changes within the SEM chamber. It ensures a seamless workflow and facilitates the smooth integration of additional experimental tools within the existing setup. Manipulation strategies using the nanorobotic setup are established based on the application of the developed path planning module. A pick-and-place 3D nanomanipulation technique of CNTs using cooperative control of dual micromanipulators has been demonstrated for nanodevice construction. Additionally, the electrical response of individually manipulated CNTs is recorded using a two-probe measurement technique.

Creative thinking for learning algebra: Year 10 students’ problem solving and problem posing with quadratic figural patterns

There is increasing focus on giving all students opportunities to develop their creative thinking in mathematics. In a fine-grained qualitative case study, Australian Year 10 (15–16-year-old) students experienced problem-solving and problem-posing tasks in a learning sequence designed to elicit creative thinking through visualization and with algebraic (functional) concepts. This article shares findings on two pairs’ creative processes and work products for generalizing and creating quadratic figural growing patterns, related to the cognitive, affective, and aesthetic dimensions of learning. Post-sequence data on the class's preferences for types of creative thinking tasks are also shared. Students were found to exhibit different creativity aspects in their problem solving and varying levels of meta-representational competency in their problem posing. The students evidenced diverse affective responses to the different types of tasks, with proportionally more students preferring problem solving to problem posing. Some implications for engaging secondary mathematics students in creative thinking tasks are shared along with recommendations for future research.

Sparsify dynamically expandable network via variational dropout

This paper develops a new method for lifelong learning referred to as Sparsify Dynamically Expandable Network (SDEN) via Variational Dropout, which explores a sparse model while preserving the performance. Dynamically Expandable Network (DEN) can learn a sequence of tasks via performing network retraining, network expansion by adding only the necessary neurons, and network split to effectively prevent semantic drift in an online manner. To overcome point estimation of parameters in DEN, Bayesian Compression for DEN is developed under the Bayesian framework. However, this method demands more time for model training and testing. To improve the model efficiency, we propose SDEN under the efficient sparse learning framework. We validate our SDEN in the lifelong learning scenarios with multiple frequently used benchmarks, on which it can obtain comparable classification accuracy, and less training and testing time compared with the comparison methods. Furthermore, our method can also learn a more sparse network structure which means fewer network parameters.

The effects of task complexity and task sequencing on L2 performance: a systematic review

ABSTRACT This systematic review aims to explore how task complexity and task sequencing affect the complexity, accuracy, and fluency (CAF) of second language performance. Through an analysis of studies conducted between 2012 and 2021, this review investigates the characteristics of the studies, operationalisation of task complexity, measurements of CAF, and the effects of task complexity and task sequencing on CAF. The results suggest a shift in research focus from task complexity to task sequencing. Most prior studies examined Robinson’s hypotheses among English adult learners engaged in writing tasks, mainly utilising elements, reasoning demands, and content support to manipulate task complexity. In addition, they employed a diverse range of methods to measure CAF. The findings partially support the Cognition Hypothesis and the SSARC (stabilise, simplify, automatise, reconstruct, and complexify) model. Previous findings provide robust evidence that complex tasks, controlled via elements and reasoning demands, enhance language complexity. Furthermore, sequencing tasks from simple to complex has been shown to overall improve CAF. Implications for future research are discussed.

Age-related differences in finger interdependence during complex hand movements.

The well-known decrease in finger dexterity during healthy aging leads to a significant reduction in quality of life. Still, the exact patterns of altered finger kinematics of older adults in daily life are fairly unexplored. Finger interdependence is the unintentional comovement of fingers that are not intended to move, and it is known to vary across the lifespan. Nevertheless, the magnitude and direction of age-related differences in finger interdependence are ambiguous across studies and tasks and have not been explored in the context of daily life finger movements. We investigated five different free and daily-life-inspired finger movements of the right, dominant hand as well as a sequential finger tapping task of the thumb against the other fingers, in 17 younger (22-37 yr) and 17 older (62-80 yr) adults using an exoskeleton data glove for data recording. Using inferential statistics, we found that the unintentional comovement of fingers generally decreases with age in all performed daily-life-inspired movements. Finger tapping, however, showed a trend towards higher finger interdependence for older compared with younger adults. Using machine learning, we predicted the age group of a person from finger interdependence features of single movement trials significantly better than chance level for the daily-life-inspired movements, but not for finger tapping. Taken together, we show that for specific tasks, decreased finger interdependence (i.e., less comovement) could potentially act as a marker of human aging that specifically characterizes older adults' complex finger movements in daily life.NEW & NOTEWORTHY Kinematic finger movement data were analyzed with regard to age-related differences. Extensive analyses of complex and daily-life-inspired movements reveal that the direction of age effects is not uniform but task-dependent: Although older adults generally show more finger interdependence than younger adults in a simple finger tapping task, this effect is reversed for daily-life-inspired movement tasks. For these tasks, finger interdependence indices offer potential new markers to predict the age group of an individual using machine learning approaches.

Incremental Fuzzy Clustering-Based Neural Networks Driven With the Aid of Dynamic Input Space Partition and Quasi-Fuzzy Local Models.

Fuzzy clustering-based neural networks (FCNNs) based on information granulation techniques have been shown to be effective Takagi-Sugeno (TS)-type fuzzy models. However, the existing FCNNs could not cope well with sequential learning tasks. In this study, we introduce incremental FCNNs (IFCNNs), which could dynamically update themselves whenever new learning data (e.g., single datum or block data) are incorporated into the dataset. Specifically, we employ dynamic (incremental) fuzzy C-means (FCMs) clustering algorithms to reveal a structure in data and divide the entire input space into several subregions. In the aforementioned partition, the dynamic FCM adaptively adjusts the position of its prototypes by using sequential data. Due to the time-sharing arrival of training data, compared with batch learning models, incremental learning methods may lose classification (prediction) accuracy. In order to tackle this challenge, we utilize quasi-fuzzy local models (QFLMs) based on modified Schmidt neural networks to replace the popular linear functions in TS-type fuzzy models to refine and enhance the ability to represent the behavior of fuzzy subspaces. Meanwhile, the recursive least square error (LSE) estimation is utilized to update the weights of QFLMs from one-by-one or block-by-block (fixed or varying block size) learning data. In addition, the L2 regularization is considered to ameliorate the deterioration of generalization abilities caused by potential overfitting when carrying out weight estimation. The proposed method leads to the construction of FCNNs in a new way, which can effectively deal with incremental data as well as deliver sound generalization capability. Extensive machine-learning datasets and a real-world application are employed to show the validity and performance of the presented methods. From the experimental results, we show that the proposal can maintain sound classification accuracy when effectively processing sequential data.

Joint Optimization of Sequential Task Offloading and Service Deployment in End-Edge-Cloud System for Energy Efficiency

Joint Optimization of Sequential Task Offloading and Service Deployment in End-Edge-Cloud System for Energy Efficiency

Optimizing Production Scheduling in Manufacturing: Strategies and Technologies for Efficiency

This is manufacturing, efficient production scheduling is crucial for maximizing output and reducing costs. This abstract describes strategies and technologies to achieve this efficiency. It covers aspects like demand forecasting, resource allocation, optimizing task sequencing, and leveraging real-time tracking. By implementing these methods, manufacturers can streamline workflow, minimize idle time, and ensure timely deliveries. This report explores the challenges faced in production scheduling in manufacturing and examines strategies and technologies that can be used to optimize scheduling processes. The report discusses the importance of production scheduling in achieving operational efficiency and meeting customer demands. Various strategies, such as lean manufacturing, just-in- time (JIT) production, and advanced planning and scheduling (APS) systems, are analyzed for their effectiveness in improving production scheduling. Additionally, the report explores technologies such as artificial intelligence (AI), machine learning, and the Internet of Things (IoT) that can enhance production scheduling capabilities. Case studies and examples are used to illustrate how these strategies and technologies have been implemented successfully in real-world manufacturing settings. The report concludes with recommendations for manufacturers looking to optimize their production scheduling processes.

Effect of positive social comparative feedback on the resting state connectivity of dopaminergic neural pathways: A preliminary investigation

Positive social comparative feedback is hypothesized to generate a dopamine response in the brain, similar to reward, by enhancing expectancies to support motor skill learning. However, no studies have utilized neuroimaging to examine this hypothesized dopaminergic mechanism. Therefore, the aim of this preliminary study was to investigate the effect of positive social comparative feedback on dopaminergic neural pathways measured by resting state connectivity. Thirty individuals practiced an implicit, motor sequence learning task and were assigned to groups that differed in feedback type. One group received feedback about their actual response time to complete the task (RT ONLY), while the other group received feedback about their response time with positive social comparison (RT + POS). Magnetic resonance imaging was acquired at the beginning and end of repetitive motor practice with feedback to measure practice-dependent changes in resting state brain connectivity. While both groups showed improvements in task performance and increases in performance expectancies, ventral tegmental area and the left nucleus accumbens (mesolimbic dopamine pathway) resting state connectivity increased in the RT + POS group but not in the RT ONLY group. Instead, the RT ONLY group showed increased connectivity between ventral tegmental area and primary motor cortex. Positive social comparative feedback during practice of a motor sequence task may induce a dopaminergic response in the brain along the mesolimbic pathway. However, given that absence of effects on expectancies and motor learning, more robust and individualized approaches may be needed to provide beneficial psychological and behavioral effects.