Surface Layer Research Articles

Conversion to Greenhouse Cultivation from Continuous Corn Production Decreases Soil Bacterial Diversity and Alters Community Structure

Changes in crop types and long-term monoculture substantially impact soil microbial communities. Exploring these changes and their influencing factors is of great significance for addressing the challenges posed by continuous cropping. Soil surface layer samples from greenhouse tomatoes fields cultivated for 5 (Y5), 9 (Y9), 13 years (Y13), and a surrounding corn field (CK) as a control were analyzed. The Y13 sample showed a significant increase in the relative abundance of Pseudomonadota (43.1%) and a decrease in Actinobacteria (50.3%) compared to the CK sample. Soil bacterial alpha diversity generally declined from the CK to Y13 (0.1–22.2%) sample, with a small peak in Y9 for Chao1 and Observed_species. Significant differences in Chao1 and Observed_ species were observed between the CK and Y13 samples. Beta diversity analysis revealed a pronounced variation in soil bacterial community structure across planting years, with the divergence from the CK sample intensifying over time. In comparison to the Y5 vs. CK samples, Y9 and Y13 exhibited marked differences from the CK across the same and broader metabolic pathways, suggesting a potential convergence of microbial activities over time. The Y9 and Y13 samples showed significantly higher biosynthesis abundance (7.50% and 6.36%, respectively) than the CK. In terms of soil physicochemical indices, the carbon–nitrogen ratio was the primary factor influencing soil bacterial composition. In conclusion, we found that crop alteration and continued planting changed the soil’s bacterial composition and increasing planting years suppressed the soil’s bacterial diversity, leading to a stable bacterial ecology after nine years. Implementing appropriate measures during this critical period is vital for optimal soil utilization.

Adhesion Mechanics and Detachment Dynamics of Vanishing Surface Layers on Hydrogels

Adhesion Mechanics and Detachment Dynamics of Vanishing Surface Layers on Hydrogels

Impact of Glow-Discharge Nitriding Technology on the Properties of 3D-Printed Grade 2 Titanium Alloy

This study presents a comparative analysis of the corrosion resistance of nitrided layers on conventional Grade 2 titanium alloy and those produced by direct metal laser sintering (DMLS). Low-temperature glow-discharge nitriding of the tested materials was carried out using conventional glow-discharge nitriding (so-called nitriding at the cathode potential—TiN/CP) and with the use of an “active screen” (nitriding at the plasma potential—TiN/PP). The TiN + Ti2N + Ti(N) layers were characterized by their microstructure, nanohardness profile distribution, surface topography, and corrosion resistance. The reduction in the cathodic sputtering phenomenon in the process using the active screen allowed the creation of surface layers that retained the topography of the base material. The parameters of the glow-discharge treatment led to grain growth in the printed substrates. This did not adversely affect corrosion resistance. The corrosion resistance of nitrided layers on the printed titanium alloy is only slightly lower than that of layers on the conventional Grade 2 alloy. Iron precipitates at grain boundaries facilitate increased nitrogen diffusion, resulting in reduced nitrogen concentration in the surface layer, slight changes in corrosion potential values, and increased nitrogen concentration in the Ti(N) diffusion layer.

Innovative 3D Janus foam design achieves high-efficiency and stable solar desalination with improved salt resistance and heat management

SDIE technology is an effective means to address freshwater scarcity, but faces challenges such as thermal management, salt scale resistance, and high energy efficiency. Herein, a 3D Janus Foam with a hydrophobic surface layer and a hydrophilic inner layer was synthesized for efficient seawater desalination. Such strategic layering provides effective thermal management, resulting in a heat loss of only ∼1.13 % throughout the photothermal conversion process. The Janus Foam’s ability to prevent salt accumulation while maintaining high evaporation efficiency over extended periods is a critical improvement over current technology. Under 1 kW m−2, the evaporation rate of the Janus Foam is as high as 1.7898 kg m−2 h−1 with an efficiency of 96.87 %. Even under actual seawater conditions, the evaporation rate of the foam remains at 1.7426 kg m−2 h−1 with an efficiency of 91.83 %, demonstrating its high energy efficiency and adaptability to different operating environments. In conclusion, the innovative design of the 3D Janus foam offers a promising avenue for addressing global freshwater scarcity through enhanced solar interfacial evaporation processes.

Cyclic Atomic Layer Etching of PdSe2

AbstractThe unique characteristic of 2D transition‐metal dichalcogenide (TMD) semiconductor materials such as PdSe2 is the ability of the bandgap to vary on the basis of the number of layers present. This variation results in a broad bandgap range spanning from semi‐metallic to semiconducting materials, underscoring the significance of precisely controlling the material thickness. In this study, the thicknesses of chemical vapor deposited PdSe2 films are precisely controlled layer‐by‐layer via cyclic atomic layer etching (ALE), which comprised a radical adsorption step generated by oxygen and chlorine plasmas, followed by a desorption step with an organic solvent vapor such as formic acid. Cyclic etching with one monolayer of PdSe2/cycle is achieved using both types of adsorption gases while maintaining the ratio of Se/Pd underlying PdSe2 at ≈2. This cyclic ALE method is also applicable for smoothing TMD material surfaces by isotropically removing individual rough surface layers. Because this etching method only utilizes chemical reactions with radicals generated by plasmas and organic vapors, it is not only unaffected by the physical damage caused by the irradiation of energetic particles such as ions in plasmas, but also is applicable to 3D structure processing.

Enhancing structural protection of reinforced concrete structures against high dynamic loads using post-installed UHPFRC/UHPFRSC

Recently there has been an observed change in security policy across the globe which implies that humanity must prepare for hybrid and asymmetric acts of war. This security situation will result in spontaneous attacks from non-military groups. The threats include ballistic attacks from commercially available weapons, detonation of explosives, and impact of vehicles. These attacks are focused on critical infrastructures. Reinforced concrete (RC) elements with ballistic and explosion protection are of huge relevance. This requires new concepts and innovative solutions for the protection of new buildings and/or for the strengthening of existing structures. In this paper a method for the increase of structural safety is shown using Ultra-High Performance Fiber Reinforced Concrete (UHPFRC) or sprayed UHPFRC, so called UHPFRSC, as a surface layer for reinforced concrete structures. The UHPFRC/UHPFRSC is applied in thin layers of 30 - 80 mm on the protection side. The interaction of the two different cementitious materials results in increased resistance to high dynamic loads. The traditional reinforced concrete on the impact side absorbs a major fraction of the energy of impact. On the back side (protection side), tensile forces are generated by the impact, which can excellently be handled by the UHPFRC/UHPFRSC. For proof of concept of the hybrid strengthening method, tests were carried out on UHPFRC - RC composite elements. In the test campaign, ballistic tests were performed using test specimens with dimensions of 500 × 500 mm. The layer thicknesses were 120 mm reinforced concrete and 40 mm UHPFRC. Additional steel rebars in the UHPFRC layer were applied for half of the specimens. The investigation demonstrated the effectiveness of the strengthening method, showing high resistance to high-dynamic loads. This behavior is attributed to the absorption and transfer of tensile stresses by the UHPFRC, that reduces penetration depth and damage, ensuring remaining load-bearing capacity after gunfire.

Ag nanoparticles at p-Si/ MAPbI3 perovskite interface: improved photo responsivity and response speed in photodetection

Although enhanced performances of photovoltaic devices by embedding metal nanoparticals in charge transport layer, doping into active layer bulk, decorating the active layer surface, and inserting at the interface between semiconductor and the electrode were reported, the effect of incorporating metal NPs at the interface of single crystal semiconductor and perovskite is rarely tackled. Herein the effects of incorporating Ag nanoparticals (AgNPs) at p-Si/MAPbI3 perovskite interface on the photodiode performances were investigated. The results showed that compared with reference device (without AgNPs) the photoresponsivity of the device incorporating AgNPs is greatly improved with the exception for light with wavelengths fall in the spectral range where AgNPs have strong optical absorption. This effect is extremely significant for relatively shorter wavelengths in visible region, and a maximal improvement of around 10.6 times in photoresponsivity was achieved. The physical origin of the exception for spectral range that AgNPs have strong optical absorption is the cancelation of scatter resulted enhancement through AgNPs by band-to-band absorption resulted reduction of photocurrent, in which the generated electron has energy near the fermi level and the hole has large effective mass, which relax by nonradiative recombination, thus making not contribution to the photocurrent. More importantly, the AgNP decorated device showed much faster photo response speed than reference device, and a maximal improvement of around 7.9 times in rise and fall time was achieved. These findings provide a novel approach for high responsive and high speed detection for weak light.

Volatile organic compound (VOC) emissions from no-added-formaldehyde lignosulphonate/pMDI particleboards and their effect on indoor air quality

ABSTRACT Wood-based panels, for example particleboards, are responsible for releasing formaldehyde and volatile organic compounds (VOCs), consequently polluting indoor air. Thus, the demand for eco-friendly wood adhesives, such as lignosulphonates (LS), has increased in detriment of the traditionally used urea-formaldehyde resins. However, combination with polymeric 4,4′-diphenylmethane diisocyanate (pMDI) is commonly proposed to minimize pressing times. In this study, particleboards were manufactured using a low lab-scale press factor of 7.5 s/mm. The adhesive contents were: 1.3% pMDI with 2.2% propylene carbonate (PC) solvent in the core layer and 15% LS in the surface layers. The VOC emissions of these boards were evaluated against those of commercial urea-formaldehyde boards. Headspace gas chromatography-mass spectrometry analysis indicated that the total VOC emissions were 66% higher for the LS/pMDI boards, comprising mainly of PC and furfural. After 14-days in a 25 L chamber, VOC emissions were examined according to ISO 16000-9:2006. LS/pMDI particleboards emitted four times more VOCs than standard boards, with 80% corresponding to PC and furfural, a suspected carcinogen. Consequently, the need for VOC quantification, even for bio-based boards is highlighted. An extension of EN 16516:2017 + A1:2020 to furniture products is also advised.

X-ray polarisation signatures in bombarded magnetar atmospheres

Abstract Magnetars are neutron stars that host huge, complex magnetic fields which require supporting currents to flow along the closed field lines. This makes magnetar atmospheres different from those of passively cooling neutron stars because of the heat deposited by backflowing charges impinging on the star surface layers. This particle bombardment is expected to imprint the spectral and, even more, the polarisation properties of the emitted thermal radiation. We present solutions for the radiative transfer problem for bombarded plane-parallel atmospheres in the high magnetic field regime. The temperature profile is assumed a priori, and selected in such a way to reflect the varying rate of energy deposition in the slab (from the impinging currents and/or from the cooling crust). We find that thermal X–ray emission powered entirely by the energy released in the atmosphere by the magnetospheric back–bombardment is linearly polarised and X-mode dominated, but its polarisation degree is significantly reduced (down to 10%–50%) when compared with that expected from a standard atmosphere heated only from the cooling crust below. By increasing the fraction of heat flowing in from the crust the polarisation degree of the emergent radiation increases, first at higher energies (∼10 keV) and then in the entire soft X-ray band. We use our models inside a ray-tracing code to derive the expected emission properties as measured by a distant observer and compare our results with recent IXPE observations of magnetar sources.

A dual-layer nano dressing with enhanced antimicrobial and healing properties via sesame nanoemulgel with efficient levofloxacin delivery for wound management

Creating suitable wound dressings is considered a promising approach for treating severe skin injuries, as they can provide the environment for healing and protection against infection. The optimum wound dressing should possess biocompatibility, high absorbency, antimicrobial activity, breathability, and mechanical strength. So, in this study, we created a two-layer dressing that includes a surface layer composed of xanthan, polyvinyl alcohol, and sesame oil, as well as a nanofibrous sublayer that contains polyvinyl alcohol, collagen, levofloxacin, and sesame oil nanoemulsion (Video 1). This dual structure is designed to offer antimicrobial properties and facilitate wound healing while having suitable physical stability. The films showed desirable morphological features and significantly increased flexibility (less than 1000). These features were respectively proven through scanning electron microscopy and tensile strength. Laboratory investigations were conducted to examine the precise compatibility and anti-inflammatory features. According to the obtained results, the nanosystems showed compatibility with hemolysis below 5 percent and by adding sesame oil to the films, their anti-inflammatory properties (88 ± 0.19 %) and blood compatibility (1.3507 ± 0.20) increased. In-vivo studies using the rat skin defect model showed that the dressings significantly accelerate the closure of skin wounds and enhance the reconstruction of skin appendage structures. The therapeutic effect resulted from reducing inflammatory factors, and the film's antimicrobial properties effectively prevent the growth of harmful microorganisms. In conclusion, the study suggests that the new nano-biocomposite films suit wound management.

Design and Technological Aspects of Integrating Multi-Blade Machining and Surface Hardening on a Single Machine Base

Modern mechanical engineering faces high competition in global markets, which requires manufacturers of process equipment to significantly reduce production costs while ensuring high product quality and maximum productivity. Metalworking occupies a significant part of industrial production and consumes a significant share of the world’s energy and natural resources. Improving the technology of manufacturing parts with an emphasis on more efficient use of metalworking machines is necessary to maintain the competitiveness of the domestic machine tool industry. Hybrid metalworking systems based on the principles of multi-purpose integration eliminate the disadvantages of monotechnologies and increase efficiency by reducing time losses and intermediate operations. The purpose of this work is to develop and implement a hybrid machine tool system and an appropriate combined technology for manufacturing machine parts. Theory and methods. Studies of the possible structural composition and layout of hybrid equipment at integration of mechanical and surface-thermal processes were carried out, taking into account the basic provisions of structural synthesis and componentization of metalworking systems. Theoretical studies were carried out using the basic provisions of system analysis, geometric theory of surface formation, design of metalworking machines, methods of finite elements, and mathematical and computer modeling. The mathematical modeling of thermal fields and structural-phase transformations during HEH HFC was carried out in ANSYS (version 19.1) and SYSWELD (version 2010) software packages using numerical methods of solving differential equations of unsteady heat conduction (Fourier equation), carbon diffusion (2nd Fick’s law) and elastic–plastic behavior of the material. The verification of the modeling results was carried out using in situ experiments employing the following: optical and scanning microscopy; and mechanical and X-ray methods of residual stress determination. Formtracer SV-C4500 profilograph profilometer was used in the study for simultaneous measurement of shape deviations and surface roughness. Surface topography was assessed using a Walter UHL VMM 150 V instrumental microscope. The microhardness of the hardened surface layer of the parts was evaluated on a Wolpert Group 402MVD. Results and discussion. The original methodology of structural and kinematic analysis for pre-design studies of hybrid metalworking equipment is presented. Methodological recommendations for the modernization of multi-purpose metal-cutting machine tool are developed, the implementation of which will make it possible to implement high-energy heating with high-frequency currents (HEH HFC) on a standard machine tool system and provide the formation of knowledge-intensive technological equipment with extended functionality. The innovative moment of this work is the development of hybrid metalworking equipment with numerical control and writing a unique postprocessor to it, which allows to realize all functional possibilities of this machine system and the technology of combined processing as a whole. Special tooling and tools providing all the necessary requirements for the process of surface hardening of HEH HFC were designed and manufactured. The conducted complex of works and approbation of the technology of integrated processing in real conditions in comparison with traditional methods of construction of technological process of parts manufacturing allowed to obtain the following results: increase in the productivity of processing by 1.9 times; exclusion of possibility of scrap occurrence at finishing grinding; reduction in auxiliary and preparatory-tasking time; and reduction in inter-operational parts backlogs.

Influence of surface state on interface bonding strength of Al/Ta laminated composite via differential temperature rolling

Al/Ta laminated composite is one of the promising space radiation shielding materials. However, due to significant differences in the properties of Al and Ta alloys, the interface bonding strength of rolled Al/Ta laminated composites is weak. In this study, we prepared 2A12 Al/Ta-2.5W laminated composite using differential temperature rolling method. The influence of surface state on the interface microstructure and interface bonding strength were systematically analyzed, and the interface bonding mechanism of Al/Ta laminated composite was revealed. It is found that 2A12 Al and Ta-2.5W alloys are successfully bonded via differential temperature rolling within rolling temperature range of 350∼450 °C and rolling reduction range of 40 %–50 % when the hardening degree of Ta-2.5W surface layer exceeds 25 %, and the roughness of Ta-2.5W and 2A12 Al surface is greater than 4.5 μm and 3.6 μm, respectively. It is demonstrated that increasing the hardening degree and roughness at Ta-2.5W surface, while decreasing the hardening degree and increasing roughness at 2A12 Al surface can facilitate cracking of the surface layer at Ta-2.5W side and the embedding of virgin Al metal into the cracks during rolling, which can promote the interface bonding process between 2A12 Al and Ta-2.5W alloys. The highest interfacial bonding strength of Al/Ta laminated composite can reach 41.2 MPa. However, when the surface layer at Ta-2.5W side is excessively hardened and the hardness reaches two times of the substrate, thick fragments could be generated at the interface, which have detrimental effect on the interface bonding strength and the value decreases to 23.05 MPa. In terms of the effects of rolling temperature and rolling reduction, it is found that the oxide film and hardening layer on the Ta-2.5W surface are more sufficiently ruptured, and more virgin 2A12 Al metals are embedded in the cracks at the surface of Ta-2.5W at higher rolling temperature and higher rolling reduction conditions, thereby leading to the increased interface bonding strength. This study provides theoretical basis for the preparation of Al/Ta laminated composites and sheds light on the relationship between surface state and interface bonding strength of laminated metal composites.

Revealing two-dimensional electric field crowding effect in breakdown performance of DPPT-TT polymer-based OFETs

The diketopyrrolopyrrole-based polymer (DPPT-TT) has been employed in organic power field effect transistors due to its exceptional off-state breakdown performance. The impact of organic semiconductor layer thickness on the breakdown performance has not been explored. In this study, we investigate the impact of DPPT-TT layer thickness on the breakdown voltage (BV) by fabricating organic field effect transistors (OFETs) with various DPPT-TT layer thicknesses. Our findings reveal that the devices' BV is a strong function of DPPT-TT layer thickness, and reducing the DPPT-TT layer thickness from 68 to 15 nm results in a decrease in BV from 291 to 86 V, attributed to the two-dimensional (2D) electric field crowding effect. An analytical model utilizing the 2D Poisson equation reveals an electric field at the DPPT-TT layer's surface. Thinner DPPT-TT layer exhibits larger electric field peak, leading to premature breakdown near the drain electrode. The relationship between breakdown electric field and DPPT-TT layer thickness was established by fitting the experimental data to the model, revealing an average BV error of only 8.8%. This phenomenon is validated to be ubiquitous in polymer based OFETs via DPPT-TT-based and P3HT-based devices. According to the proposed model, this 2D electric field crowding effect can be mitigated by adjusting the dielectric layer thickness (tD) and/or the dielectric material.

Characterizing anomalous peaks in the resistance-temperature profile of Bi2Sr2CaCu2O8+δ flakes featuring surface degeneration

Abstract This study focuses on an observed anomalous resistance peak in the temperature-dependent resistance (RT) curves of Bi2Sr2CaCu2O8+δ (BSCCO), attributed to surface degradation and pronounced electrical resistance anisotropy. Employing a standard four-point probe technique on the ab-plane, this research circumvents conventional c-axis testing limitations, enhancing the understanding of BSCCO's electrical behavior by avoiding contact resistance and etching issues. A comprehensive three-dimensional (3D) model, developed using the finite element method (FEM), captures the strong resistive anisotropy and correlates the depth of surface degradation with the anomalous resistance peaks, explaining this phenomenon from a quantitative perspective, providing a more specific reference for future analysis of relevant signals. The fabrication process involved pre-patterning and mechanical exfoliation techniques to minimize atmospheric exposure and ensure device integrity. Despite these efforts, surface degradation impacting the superconductivity of surface layers was inevitable. The study's experimental results, complemented by numerical modeling, reveal the intricate relationship between surface layer thickness and the anomalous resistance peak, providing an approach to gauge the extent of degradation in BSCCO devices. Moreover, it underscores the potential necessity of employing some critical techniques to avoid degradation, such as low-temperature exfoliation in other literatures where degradation signal is notably absent from RT curves. This work advances the understanding of BSCCO's electrical properties and highlights the critical need for precise fabrication and environmental controls in developing high-temperature superconducting technologies.

Elucidating the time-dependent Charge Neutrality Point Modulation of Polymer-coated Graphene Field-effect Transistors in an Ambient Environment.

The charge neutrality point (CNP) is one of the essential parameters in the development of graphene field-effect transistors (GFET). For GFET with an intrinsic graphene channel layer, the CNP is typically near-zero-volt gate voltage, implying that a well-balanced density of electrons and holes exists in the graphene channel layer. Fabricated GFET, however, typically exhibits CNP that is either positively or negatively shifted from the near-zero-volt gate voltage, implying that the graphene channel layer is unintentionally doped, leading to a unipolar GFET transfer characteristic. Furthermore, the CNP is also modulated in time, indicating that charges are dynamically induced in the graphene channel layer. In this work, understanding and mitigating the CNP shift were attempted by introducing passivation layers made of polyvinyl alcohol (PVA) and polydimethylsiloxane (PDMS) onto the graphene channel layer. The CNP was found to be negatively shifted, recovered back to near-zero-volt gate voltage, and then positively shifted in time. By analyzing the charge density, carrier mobility, and correlation between the CNP and the charge density, it can be concluded that positive CNP shifts can be attributed to the charge trapping at the graphene/SiO2 interface. The negative CNP shift, on the other hand, is caused by dipole coupling between dipoles in the polymer layer and carriers on the surface of the graphene layer. By gaining a deeper understanding of the intricate mechanisms governing the CNP shifts, an ambiently stable GFET suitable for next-generation electronics could be realized.&#xD.

Black etched electroless Ni–P coatings for enhanced efficiency towards alkaline water splitting

Requirements for wider use of water electrolysis for hydrogen production include the development of highly efficient, cheap, and easily made electrodes. Promising properties can be achieved with Ni–P materials. Herein, nitric acid etching (being used for blackening of electroless Ni–P coatings) resulted in enhanced efficiency towards hydrogen and oxygen evolution reactions (HER and OER) in 1.0 M KOH. For etched Ni-7.6 wt%P coating, the potential of HER at −10 mA cm−2 was about −0.20 V vs. RHE, and the potential of OER at 10 mA cm−2 was about 1.67 V, whereas for etched Ni they were −0.40 V and 1.94 V, respectively. Surface layers of etched coatings contained bundles of microrods and were enriched in O and P. Impedance measurements showed that etching caused about a 60-fold increase of CPE which can be ascribed to the development of surface area and pseudocapacitance of redox reactions, involving Ni ⇄ NiO. It is proposed that the electroactivity of Ni–NiO composite is to a large extent associated with the oxide reduction effects, involving high activity of newborn (pristine) Ni nanoparticles, acidification at the metal surface and disclosure of bare metal. Etched Ni–P coatings can be promising for the activation of electrodes for water electrolysis.

Magnetic Anisotropy of Cr2Te3: Competition between Surface and Middle Layers

Recently, the orbital coupling in 2D materials has been demonstrated to have a significant impact on the magnetic anisotropy (MA) of CrTe2. The Te atomic layers on the surface layers determine the magnetocrystalline anisotropy (MCA) of the system due to orbital coupling. Herein, is proposed to investigate the surface and middle layers of Te atoms on MA. The MCA of consists of in‐plane and out‐of‐plane components, which are contributed by the surface layer and middle layer, respectively. Due to the lack of Cr–Te–Cr chemical bonds in the z‐axis, the surface layer produces coupling and results in the in‐plane MA. In addition, a tensile strain can enhance the coupling on the middle layer and lead to the out‐of‐plane MCA. At the same time, the out‐of‐plane MCA breaks the vertical mirror symmetry and an anomalous Hall effect has been detected on monolayer (1L) . Based on this result, an anomalous Hall device is designed to record and read information. The opposing contribution of the surface and middle layers provides a completely new way to understand 2D materials.

The impact of the destruction of the Kakhovka reservoir dam on the oceanographic conditions in the north-western part of the Black Sea according to the results of modeling

Based on the results of numerical modelling, characteristic features of distribution of transformed and polluted waters of the Dnieper River in the water area of the north-western part of the Black Sea (NWBS) are determined and analyzed. This pollution of the marine environment resulted from the extremely large man-made flood caused by the destruction of the Kakhovka Reservoir dam by the Russian occupation forces in June 2023. Various types of pollutants, which contained in the Kakhovka Reservoir, in the lower Dnieper River and in the bottom sediments, were carried out into the sea by the flood discharge. A significant amount of pollutants was washed into the sea from the flooded areas of the lower Dnieper basin. Special attention is given to changes in oceanographic conditions in the Dnieper-Bug estuary region (DBR) of the Black Sea, which determine the extent of marine pollution. Sea water salinity was used as an indicator of the degree of infiltration of polluted seawater from the estuary into the sea. It was identified that the least transformed river waters with low salinity correspond to high pollution levels. Delft3D-Flow Flexible Mesh hydrodynamic model, developed by Deltares, was used in this study. The simulation was performed for the time period 01 to 30 June 2023. During the first days after the dam break the desalinated and polluted transitional waters, flowing from the Dnieper-Bug estuary, spread over the entire water column down to 15-20 m depth in the DBR area. In this case, the spreading of transitional waters was atypical, as it usually occurs only within the thin near-surface layer of the sea. By mid-June the flow of transitional water with a salinity of 4-6 ‰ covered the entire water column from surface to bottom near the northern coast of the NWBS and over the Odessa Bank. This was facilitated by the supermassive volumes of transformed Dnieper river waters flowing out over a short period of time due to dam break, as well as by the resulting intense gradient currents and mixing caused by spatial gradients in the velocity of the generated currents. The width of the desalinated water plume and its area in the bottom layer were smaller than in the surface layer. The largest vertical salinity gradients were formed to the south of the Odessa Bank, where salinity was 4-6 ‰ in the surface layer and 14-17 ‰ in the bottom. Dilution of the desalinated water plume in the bottom water layer was much more intensive than in the surface water. The character of water circulation pattern in the northern part of the NWBS in the first days after the inflow of transient waters from the Dnieper-Bug estuary was determined by the runoff gradient currents, which later were replaced by wind-driven currents in the Odessa area and over the Odessa Bank, and by the meandering flow of gradient density currents further south. The findings of this study contribute to a better understanding of the impact of the inflow of transformed river waters from the Dnieper-Bug estuary on the variability of oceanographic characteristics and the ecological state of marine waters in the Dnieper-Bug region of the northwestern Black Sea.

A scanning electron microscope evaluation of surface roughness of different clear aligners – A comparative in-Vitro study

Clear aligner are thermoplastic polyurethane materials which produces small increments of tooth movements by each aligner tray. Clinical effectiveness of the treatment largely depend on the mechanical properties of the material. The use of scanning electron microscopy (SEM) in invitro environment allows to evaluate the surface morphology of the aligners The aim of the study is to compare the surface roughness of different types of clear aligners after thermoforming and after invitro aging. A sample of 15 aligners from Group A (DURAN), Group B (ERKODUR), Group C (MONOFLEX) were taken for this study. After screening the subjects were scanned by intraoral scanner and STL file were imported to Maestero 3D software. Then resin models were printed and aligners were fabricated in the models by thermoforming machine. The first set of aligners were scanned by Scanning Electron Microscope and another set of aligners were placed in chewing simulator for simulating intraoral environment. Then the second set of aligners were sent for SEM evaluation. Mean comparison of surface roughness and root mean square surface roughness was compared by paired t test and comparison among the groups was done by one way ANOVA test. The surface roughness of both aligners increased after thermoforming. This could be due to thermoforming process which could be due to temperature variation. After the ageing of the aligners in the invitro environment, there is homogenous and smooth layer of the aligner surfaces which could be due to adhesion of biofilm and polishing effect by chewing strokes.

Interfacial deterioration in highly fluorinated cation-disordered rock-salt cathode: Carbonate-based electrolyte vs. ether-based electrolyte

Cation-disordered rock-salts (DRX) emerge as an intriguing class of high-capacity cathode materials, garnering significant attention in the development of advanced energy-storage systems. Fluorination strategies have been raised to regulate redox and structure for better DRX electrochemical performance. However, research on the interfacial processes during fluorinated DRX cycling remains limited. Here, we evaluate a highly fluorinated DRX, Li2Mn2/3Nb1/3O2F (LMNOF), in different electrolytes to correlate its cycling performance with distinct interfacial evolutions. During cycling in the carbonate-based electrolyte, a thick Mn-containing CEI forms on the LMNOF surface, leading to gradual capacity decay. Intriguingly, the addition of fluoroethylene carbonate (FEC) would bring about surface oxygen loss, Mn-ion dissolution and formation of a fluorinated surface layer by reacting with the LMNOF surface, which critically deteriorate the cycling performance. In comparison, the ether-based electrolyte is compatible with the LMNOF surface, resulting in a more favorable cycling stability. This work sheds light on the interfacial deterioration mechanism of LMNOF cathode in traditional carbonate-based electrolyte, emphasizing the importance of using advanced non-reactive electrolytes to enhance DRX performance.