Supercritical Fluid Chromatography Research Articles

A comparison of chiral separations by supercritical fluid chromatography and high-performance liquid chromatography

The supercritical fluid chromatography technique is one of the most promising and innovative technologies used in the analysis as well as the separation of various racemates. The various enantiomers have been separated using SFC due to its several merits over conventional HPLC methods such as low cost, wide polarity compatibility, higher column efficiency, and fast analyzing capability, which are desirable features for the pharmaceutical industry. Therefore, it was considered worthwhile to review the applications of SFC in achiral and chiral separations. This review encompasses the latest literature exploration of various practical aspects of SFC for enantiomeric separation, purification, and applications to the pharmaceutical industry. A detailed discussion of SFC was made in terms of productivity, stacked injections, sample solubility, particle size, green incentive, organic solvent, recycle solvents, and economical aspects. Besides, future perspectives of SFC have also been highlighted. A comparison was also made between SFC and HPLC. SFC has been found better technique than HPLC for the chiral separations on a preparative scale. This article will be highly useful for chiral chromatography in pharmaceutical industries and research laboratories.

Development and validation of ultra-high performance supercritical fluid chromatography method for quantitative determination of six compounds in Guizhi Fuling capsule and tablet samples.

A fast and simple ultra-high performance supercritical fluid chromatography method has been developed for the determination of six analytes, namely (paeonol, coumarin, cinnamic alcohol, cinnamic acid, paeoniflorin, and amygdalin) in Guizhi Fuling capsule and tablet samples. The influence of the key chromatographic parameters for the separation purposes was evaluated. The optimal column was Trefoil CEL1 column. The optimal mobile phase was a gradient mixture of carbon dioxide and methanol at flow rate of 1.0mL/min. The back pressure of the system was set to 1.38 × 107 Pa and the temperature to 45°C. The six compounds were separated within 11min by the proposed ultra-high performance supercritical fluid chromatography method with satisfactory resolution. Method validation confirmed that the procedure is accurate with the recovery rates from 87.04 to 104.30%, intraday precision values less than 4.81% and interday precision less than 5.22%, and linear with R2 higher than 0.9967. Therefore, this work provides a simple and novel method for the simultaneous analysis of six compounds in Guizhi Fuling capsule and tablet samples.

Separation of monomeric and dimeric phenolic compounds in lignosulphonate lignin on different stationary phases using ultrahigh-performance supercritical fluid chromatography

Lignin is a promising renewable resource and its valorization could help to reduce our dependency on fossil carbon resources. Especially the production of small molecular weight and economically valuable compounds, such as vanillin, are of interest. A good separation of the sample components is crucial for a confident identification of compounds in complex sample mixtures using for instance mass spectrometry. In this work, the resolving power and selectivity of five different stationary phases for ultrahigh-performance supercritical fluid chromatography were studied for the class separation of lignin monomers (LMs) and dimers (LDs). A separation of LMs and LDs will help to identify such compounds in complex technical lignin samples. It could be shown that stationary phases with both hydrogen-bonding acceptor and donator groups offer high overall resolving power, while π-π-interactions are advantageous for the separation of the two compound classes. An almost complete separation combined with an improved overall resolving power was achieved with the 1-aminoanthracene stationary phase, which offers both hydrogen-bonding interactions and π-π-interactions.

Supercritical fluid chromatography using methacrylate-based monolithic column for the separation of polar analytes.

A poly(N,N-dimethyl-N-methacryloyloxyethyl-N-(3-sulfopropyl) ammonium betaine-co-ethylene dimethacrylate) monolith was prepared in a 100× 2.0mm id stainless-steel column and was investigated for supercritical fluid chromatography. Optimization of its porosity was performed by changing the conditions of polymerization. Then, the chemical group of this column was confirmed by Fourier transform infrared spectroscopy and elemental analysis. The morphology was characterized by scanning electron microscopy. The prepared column showed good repeatability based on the retention factor of adenine, uracil and cytosine to calculate their run-to-run, day-to-day, column-to-column, and batch-to-batch relative standard deviations. Those values were less than 1.9% (n=10), 6.5% (n=3), 5.6% (n=3), and 1.7% (n=3), respectively. In addition, the column was found to be stable within 3 and 10 days with relative standard deviations less than 6.5 and 8.5%, respectively. These results indicated that the columns showed good reproducibility and stability. Compared with liquid chromatogaphy, supercritical fluid chromatography provided better kinetic performance and selectivity. Finally, several neutral, acid, and basic polar analytes were utilized to test its application. The results demonstrated that the prepared column exhibited a good separation performance and showed great potential in supercritical fluid chromatography.

The adsorption of methanol on reversed phase stationary phases in supercritical fluid chromatography

The surface excess isotherms of methanol from carbon dioxide on reversed phase stationary phases under two different operational conditions – which can be considered subcritical and supercritical conditions depending on the molar fraction of CO2 in methanol – were determined using the minor disturbance peak method. The shapes of the surface excess isotherms were very similar in subcritical and supercritical conditions for the same column. To verify the influence of the sample solvent on the separation efficiency, two solvents methanol and heptane were used as sample solvents for alkylbenzene samples for the separation on the studied columns with pure carbon dioxide mobile phase. The separation efficiency was determined by calculating the number of theoretical plates. On the embedded amide stationary phase with methanol as a sample solvent the efficiency has increased due to the displacement effect of methanol on the solutes which are retained less than methanol. Then the efficiency for the rest of solutes, which coincide with the elution of the methanol peak tail has decreased as a result of the tag-along effect. The surface adsorbent heterogeneity has been discussed; the bonded ligands on the stationary phase surface demonstrated adsorption a big amount of CO2, while methanol could adsorb with small amount on the residual silanols on the surface of stationary phase and the embedded (amide) polar group in the bonded phase.

Synthesis of Dihydroisoquinoline and Dihydropyridine Derivatives via Asymmetric Dearomative Three-Component Reaction

Synthesis of Dihydroisoquinoline and Dihydropyridine Derivatives via Asymmetric Dearomative Three-Component Reaction

Application of retention modeling in chiral method development. I. Selection of isocratic composition for preparative separation with SFC

Preparative chiral separations are carried out using chiral stationary-phases (CSP) employing isocratic composition mode to take advantage of stacking multiple injections within a single continuous operation. Development of the separation method, however, is not conducted directly in the preparative systems. Chromatographic systems at analytical scale are set up to screen multiple CSPs with various mobile-phases (MP) to detect a suitable CSP-MP combination. For faster method screening, solvent-gradients are implemented - operating from low to higher modifier composition, e.g. 5 to 70%. Once the right CSP-MP pair is detected, the isocratic method for preparative separation is developed through further experimental trials in the analytical system. The scope of the trial steps is generally limited to detecting a ”good-enough” separation condition through one or two isocratic experiments. Ideally, the analyst should scout all possible isocratic conditions to detect the most suitable method; which, however, is not possible in high-throughput separation laboratories. In this report we demonstrate the utility of a simple set of algebraic equations, supported by an experimental protocol, in generating complete isocratic method options based on minimum number of experimental trials. The approach presented here was developed for chiral separation with supercritical-fluid chromatography. We also suggest an approach to identify an isocratic composition for the purification step. The process proposed in this report should be useful in developing better preparative separation methods in high-throughput laboratories.

Review on Quantification of Mineral Oil Aromatic Hydrocarbon (MOAH) from Cosmetics by Analytical Method

Mineral oils which consists mineral oil saturated hydrocarbons (MOSH) and mineral oil aromatic hydrocarbons (MOAH), which are largely applied in various consumer products like medicines cosmetics etc. MOAH which is potential public health hazard because it include carcinogenic polycyclic compounds. There is a rapid method for quantifying MOAH by proton nuclear magnetic resonance spectroscopy (1H qNMR) in anhydrous cosmetics. The 1H qNMR method is a good complement to the LC-GC-FID method. Another method is a simple and fast developed that uses columns packed with silver-modified silica in supercritical fluid chromatography with flame ionization and UV detection (SFC-FID/UV) for the determination of mineral oil saturated hydrocarbons (MOSH) and also mineral oil aromatic hydrocarbons (MOAH) in purified mineral oil samples. Another method which is based on gas chromatography with vacuum ultraviolet detection (GC-VUV) and relies on the spectral differences between the aliphatic and aromatic compounds in the sample. The detector provides a good selectivity for aromatics, direct quantification of the MOAH content is possible without the need for a laborious pre-separation of the mineral oil. GC-VUV method good sensitive for the analysis of all but gives highest purity mineral oils.

Interlaboratory study of a supercritical fluid chromatography method for the determination of pharmaceutical impurities: Evaluation of multi-systems reproducibility

Modern supercritical fluid chromatography (SFC) is now a well-established technique, especially in the field of pharmaceutical analysis. We recently demonstrated the transferability and the reproducibility of a SFC-UV method for pharmaceutical impurities by means of an inter-laboratory study. However, as this study involved only one brand of SFC instrumentation (Waters®), the present study extends the purpose to multi-instrumentation evaluation. Specifically, three instrument types, namely Agilent®, Shimadzu®, and Waters®, were included through 21 laboratories (n = 7 for each instrument). First, method transfer was performed to assess the separation quality and to set up the specific instrument parameters of Agilent® and Shimadzu® instruments. Second, the inter-laboratory study was performed following a protocol defined by the sending lab. Analytical results were examined regarding consistencies within- and between-laboratories criteria. Afterwards, the method reproducibility was estimated taking into account variances in replicates, between-days and between-laboratories. Reproducibility variance was larger than that observed during the first study involving only one single type of instrumentation. Indeed, we clearly observed an ‘instrument type’ effect. Moreover, the reproducibility variance was larger when considering all instruments than each type separately which can be attributed to the variability induced by the instrument configuration. Nevertheless, repeatability and reproducibility variances were found to be similar than those described for LC methods; i.e. reproducibility as %RSD was around 15 %. These results highlighted the robustness and the power of modern analytical SFC technologies to deliver accurate results for pharmaceutical quality control analysis.

Recent Applications of Supercritical Fluid Chromatography in Modern Analysis: Updates from 2017 to 2020

Background: Supercritical fluid chromatography (SFC) is one of the powerful analytical techniques of the modern time. Recently, extensive analytical work has been reported and is in progress by utilizing the advanced features of SFC. Low solvent consumption, high sensitivity and solvent recovery make it advantageous over the traditional liquid chromatographic techniques. It utilizes supercritical fluids having properties of both liquid and gases making the applicability of this technique to wider range of analytes. Methods: Various research reports were collected from search engines like Sciencedirect, Pubmed, Researchgate and Google Scholar. Further upon through study of these reports, significant findings/data was collected and compiled under suitable headings. Important parameters/conditions utilized in methodologies were depicted with the help of tables. Results: It was found in various reports that SFC and its hyphenation with mass spectroscopy (MS), ultra violet spectroscopy (UV), high resolution mass spectrometry (HRMS), photo diode array detector (PDA), nuclear magnetic resonance (NMR), charged aerosol detector (CAD) etc. have made possible to quantify analytes even in ultra small concentrations in complex matrices. These techniques have been successfully employed for the quantification of a wide variety of analytes with excellent accuracy, selectivity and sensitivity. Conclusion: The present review highlights the recent applications of SFC techniques in various analytical fields such as pesticide analysis, vitamin analysis, enantioseparation, lipid analysis, drug metabolite estimation, polycyclic aromatic hydrocarbons and steroid analysis. Reports from 2017 to 2020 have been included in this compilation.

Large-scale supercritical fluid chromatography purification of unstable STING agonist intermediates

A regioisomeric mixture of the nucleoside derivative, Intermediate 1, required resolution by preparative supercritical fluid chromatography (SFC) in order to obtain the desired regioisomer as a key intermediate in a STING agonist program. Various chiral columns and solvents including methanol, acetonitrile, isopropanol, and the mixture of acetonitrile and isopropanol as organic modifiers in carbon dioxide at different temperatures were screened to obtain the best regioisomeric resolution. A key issue associated with interconversion between the regioisomers via silyl migration during purification was investigated in methanol, acetonitrile, and the mixture of acetonitrile and isopropanol, and the optimal organic modifier in CO2 was established to mitigate the interconversion to an acceptable level (<5%). Taking into account peak resolution, throughput, interconversion and operation robustness, an efficient SFC method for large-scale purification was successfully developed and scaled up onto a 5 cm I. D. Chiralcel OJ-H column using 25% acetonitrile: isopropanol [1:1 (v/v)] with 0.1% ammonium hydroxide as the modifier in CO2 at a total flow rate of 270 mL/min and a temperature of 30°C. In addition, continual evaporation (i.e. every hour) of the desired isomer fraction stream post-separation ensured minimal further interconversion. A total of 258 grams were separated at a high throughput of 8.6 g/h. Regioisomeric purity of the desired isomer of Intermediate 1 was ≥98.2% and the recovery was ≥90.2%. A similar purification strategy was applied to the regioisomeric resolution of Intermediate 2, an analog of Intermediate 1. In total, 1028 grams of Intermediate 2 were processed at a high throughput of 12.5 g/h on a Viridis BEH 2-EP column. The regioisomeric purity of the desired isomer was ≥96.8% and the recovery was ≥90.7%.

The effect of water on the large-scale supercritical fluid chromatography purification of two factor XIa active pharmaceutical ingredients

BMS-962212, a parenteral Factor XIa inhibitor, was scaled-up for toxicity studies. Two steps of supercritical fluid chromatography (SFC) were developed for the chiral resolution of the penultimate and achiral purification of final active pharmaceutical ingredient (API), BMS-962212. A robust SFC process using Chiralcel OD-H with methanol-acetonitrile as modifier in CO2 was established to achieve a stable and uninterrupted operation with reduced mobile phase viscosity and system pressure drop. More than 230 g of the racemic penultimate was chirally resolved to reach >99% chiral purity, ready for final tert-butyl ester deprotection to provide the API. There were a significant number of impurities in BMS-962212 generated from the final step that needed to be removed. In contrast to conventional SFC conditions, an SFC method exploiting water and ammonia as additives in both the mobile phase and sample solution was developed to accomplish purification and desalting (i.e. removing TFA) of the zwitterionic API in one step. Water as an additive eliminated salt precipitation and improved the resolution while ammonia contributed to the desalting, details of which will be discussed in this article. A throughput of 2 g/h was achieved, and >80 g of the crude API was purified. The same strategy was applied to another Factor XIa API (compound A) and its penultimate.

Effect of the chemical composition of six hydrotreated light cycle oils for benzene, toluene, ethylbenzene, and xylene production by a hydrocracking process

The effect of the chemical composition of the hydrotreated light cycle oil (HDT LCO) on the benzene, toluene, ethylbenzene, and xylene (BTEX) production by a hydrocracking (HCK) procedure, is presented. Six different types of HDT LCOs were obtained by submitting two types of LCOs to hydrotreating (HDT) with different catalysts and experimental conditions. The products were analyzed as mono-, di- and tri-aromatic compounds using the supercritical fluid chromatography (SFC) method (ASTM D5186). The HDT LCOs were subjected to HCK with a 50/50 in weight mixture of nickel-molybdenum on alumina (NiMo/Al2O3) and H-ZSM5 (NiMo/H-ZSM5, 50/50) at 375 °C, 7.5 MPa, 1.2 h−1, and 750 m3/m3 H2/Oil. The HCK products were analyzed by gas chromatography with a flame ionization detector (GC-FID) and divided into five groups: gas, light hydrocarbons (LHCs), BTEX, middle hydrocarbons (MHCs), and heavy hydrocarbons (HHCs).The results showed that the BTEX formation ranged from 27.0 to 29.8 wt.% and it did not show a significant dependence on the mono-aromatic (59.9 and 75.6 wt.%), total aromatic (61.1–84.2 wt.%) contents or MHCs conversion (58.3–64.3 wt.%) from the departing HDT LCO feedstock. This result implies that, contrary to previous expectations, the BTEX formation does not directly depend on the amounts of total or mono-aromatic compounds when departing from real feedstocks. A GC-PIONA (paraffin, isoparaffin, olefin, naphthene, aromatic) characterization method (ASTM D6623) for mechanism understanding purpose was also carried out.

Chemical derivatization in combination with supercritical fluid chromatography to improve resolution of stereoisomers.

Aim: Quantification of stereoisomers in biological matrices is of pivotal importance for drug development. Supercritical fluid chromatography paired with chiral stationary phases is the gold standard for resolution of enantiomers. However, this technique often proves inadequate for resolution of polar stereoisomers. Materials & methods: A combination of achiral chemical derivatization with supercritical fluid chromatography using chiral stationary columns to improve enantiomeric resolution is described. Results: Separation of four possible stereoisomers of linerixibat was achieved after derivatization with 3N HCl in n-butanol within 12min (case1). Derivatization with acetic, propionic, butyric, isobutyric, valericand isovaleric anhydrides significantly improved the separation of stereoisomers (case 2 and3) within 10min. The best stereoisomeric resolution was achieved using valeric and isovaleric anhydrides.

Deep Structural Annotation of Glycerolipids by the Charge-Tagging Paterno-Büchi Reaction and Supercritical Fluid Chromatography-Ion Mobility Mass Spectrometry.

Glycerolipids (GLs) are essential for cellular lipid homeostasis, while dysregulation in GL metabolism is often associated with the onset or progression of human-related metabolic diseases. The profile of GLs is thus frequently used as a molecular readout for disease phenotyping. Although mass spectrometry (MS) is the method of choice for GL profiling, the current MS methods are unable to differentiate two major types of structural isomers due to the fact that fatty acyls can be linked to different positions on the glycerol backbone (sn-positions) and the site(s) of unsaturation in acyl chains. Herein, by utilizing charge-tagging Paterno-Büchi (PB) derivatization of carbon-carbon double bond (C═C), supercritical fluid chromatography (SFC), and mobility aligned tandem mass spectrometry (MS/MS), a workflow has been developed for the sensitive and structurally informative analysis of GLs. SFC allows fast separation (within 25 min) of sn-isomers of diacylglycerols (DGs) and separation of triacylglycerols (TGs) of different chain lengths and degrees of unsaturation. Time-aligned parallel fragmentation enables multiple-stage MS/MS of the PB-derivatized lipids in a high-throughput fashion and allows pinpointing C═C location to a specific fatty acyl chain. This workflow reveals the presence of more than 500 molecular structures of neutral lipids from pooled human plasma. A comparison of human plasma samples between type 2 diabetes (N = 7) and control (N = 7) shows significant changes in isomer compositions (C18:1 Δ9 vs Δ11) from nine groups of TG and DG. These findings suggest that the developed workflow can be potentially applied to lipid marker discovery for disease monitoring or diagnosis.

Supercritical fluid chromatography and liquid chromatography for isomeric separation of a multiple chiral centers analyte

The development of a chiral separation strategy has always been a challenge of crucial importance, particularly in the pharmaceutical field. Chromatographic methods have become popular, particularly High Performance Liquid Chromatography and Supercritical Fluid Chromatography from a preparative scale point of view. A bioactive compound bearing three stereogenic centers was entrusted in our laboratory and the aim of this work was to obtain the complete resolution of the eight stereoisomers. Nine different polysaccharide-based columns were tested in SFC under various carbon dioxide-based mobile phases. The use of a single chiral column Lux Cellulose-2 under 30% 2-PrOH in carbon dioxide, at a flow-rate of 1 mL/min, column temperature of 40°C, 120 bar outlet pressure allowed the obtention of eight peaks. To further improve the resolution of the two last isomers, two columns were serially coupled . The results obtained with the six different combinations are discussed. The tandem column supercritical fluid chromatography has demonstrated to be a useful technique to resolve the eight stereoisomers on Lux Cellulose-2//Cellulose-2 tandem of coupled columns with 30% 2-PrOH in carbon dioxide, at a flow-rate of 1 mL/min, column temperature of 40°C and 120 bar outlet pressure, despite a long analysis time. In order to compare the two methods (i.e supercritical and liquid), chiral liquid chromatography under polar aqueous-organic mode, polar organic mode and normal-phase mode, was implemented. The last mode allowed the full baseline resolution of the eight isomers on Cellulose-5 CSP, with 20% 2-PrOH in n-heptane at a flow-rate of 0.8 mL/min, at 25°C, λ=220 nm. The limits of detection and of quantification were determined for this method and the best values obtained for isomer 8 were equal to 2.84 and 9.37 nM respectively. Finally, a small-scale preparative separation of the multiple chiral centers compound was implemented on Cellulose-5 CSP within 10% 2-PrOH in n-heptane in order to study the stereoisomer elution order on Cellulose-2, Cellulose-5 and Chiralpak AD-H, under EtOH or 2-PrOH in n-heptane mobile phases, and partial reversal elution orders were observed.

The effect of column history in supercritical fluid chromatography: Practical implications

Long-term stability of retention times of a wide range of analytes has been evaluated using eight different stationary phases. These were from a single manufacturer to minimize the differences in silanol activity caused by the manufacturing process. The tested stationary phases included bridge ethylene hybrid, 2-ethylpyridine bridge ethylene hybrid with direct modification of silica particles, bidentate crosslinked charged surface hybrid fluorophenyl, bidentate crosslinked high strength silica C18, and propanediol linked phases including diol (pure propanediol linker), and three phases based on diol further modified with 2-picolylamine, diethylamine, and 1-aminoanthracene group. Retention times were monitored at the first injection, after three, nine, twelve months, and after the column regeneration via washing with pure water. The analyses were carried out using three different mobile phases, including methanol, methanol with 10 mmol/L ammonium formate, and methanol with 0.1% ammonium hydroxide.No overall decreasing or increasing trends were observed after evaluating individual contributing parameters such as analyte, stationary phase, and organic modifier. Our results suggest that the silyl-ether formation is not the only factor contributing to changes in the stationary phase pore surface. Indeed, the adsorption of mobile phase additives is probably another significant factor. That was also confirmed by the regeneration procedure using water, which is likely to reverse the silyl-ether formation to achieve the original retention. However, the retention times returned to the original values for all analytes only on three columns. Retention times on other columns remained shifted within ± 15 % RSD depending on the analyte properties and the nature of organic modifier. The retention time variations observed for each analyte group, i.e., acids, bases, and neutrals, were interpreted for each stationary phase. We concluded that the sterically protected surfaces exhibited significantly smaller changes in the retention times. Although the regeneration procedure effect depended on the column type, the results suggested beneficial effect of water. However, as the adsorption of additives on the column surface is an additional factor leading to retention time variations, the recommendation of using only one additive and/or organic modifier in each column will clearly improve the long-term repeatability of the retention times.

Enantiomeric methadone quantitation on real post-mortem dried matrix spots samples: Comparison of liquid chromatography and supercritical fluid chromatography coupled to mass spectrometry

This study describes two bioanalytical methods for the quantitation of the two methadone enantiomers in dried matrix spots using high performance liquid chromatography coupled to tandem mass spectrometry (HPLC-MS/MS) and high performance supercritical chromatography tandem mass spectrometry (HPSFC-MS/MS). Dried matrix spots were obtained by spotting 10 µL of each sample fluid on a Whatman paper. Methadone and its main metabolite, EDDP, were extracted with 100 µL methanol and subsequently injected into the LC-MS/MS and SFC-MS/MS systems. Enantiomeric separation was achieved with AGP-column for the LC conditions and with Chiralpak IH-3 in SFC. The two methods were fully validated and 93 post-mortem samples were analysed with both analytical methods. Results from validation parameters and results obtained for all post-mortem samples were compared with a significant spearman correlation of rs = 0.9978 for R-methadone and rs = 0.9981 for S-methadone. The LC method provided better results in terms of uncertainty, retention factor and resolution, whereas SFC provides better sensitivity, with lower LOD. Median R-/S-methadone ratio in peripheral blood was found equal to 1.60 (N = 32), varying from 0.79 to 4.23. The reported values were in good agreement with previously published results.Based on the results obtained here, SFC-MS/MS can be considered a reliable alternative to the widely used LC-MS/MS for the quantitation of methadone enantiomers in bioanalysis and should be evaluated for other bioanalytical methods. Both methods can be easily and quickly used in toxicological routine analysis for the methadone quantitation in human fluids matrices, even if considering that the polysaccharide coated column IH-3 used in SFC does not allow the enantiomeric EDDP separation.

Investigating Lignin-Derived Monomers and Oligomers in Low-Molecular-Weight Fractions Separated from Depolymerized Black Liquor Retentate by Membrane Filtration.

Base-catalyzed depolymerization of black liquor retentate (BLR) from the kraft pulping process, followed by ultrafiltration, has been suggested as a means of obtaining low-molecular-weight (LMW) compounds. The chemical complexity of BLR, which consists of a mixture of softwood and hardwood lignin that has undergone several kinds of treatment, leads to a complex mixture of LMW compounds, making the separation of components for the formation of value-added chemicals more difficult. Identifying the phenolic compounds in the LMW fractions obtained under different depolymerization conditions is essential for the upgrading process. In this study, a state-of-the-art nontargeted analysis method using ultra-high-performance supercritical fluid chromatography coupled to high-resolution multiple-stage tandem mass spectrometry (UHPSFC/HRMSn) combined with a Kendrick mass defect-based classification model was applied to analyze the monomers and oligomers in the LMW fractions separated from BLR samples depolymerized at 170–210 °C. The most common phenolic compound types were dimers, followed by monomers. A second round of depolymerization yielded low amounts of monomers and dimers, while a high number of trimers were formed, thought to be the result of repolymerization.

Untargeted Lipidomic Profiling of Dry Blood Spots Using SFC-HRMS.

Lipids are essential cellular constituents that have many critical roles in physiological functions. They are notably involved in energy storage and cell signaling as second messengers, and they are major constituents of cell membranes, including lipid rafts. As a consequence, they are implicated in a large number of heterogeneous diseases, such as cancer, diabetes, neurological disorders, and inherited metabolic diseases. Due to the high structural diversity and complexity of lipid species, the presence of isomeric and isobaric lipid species, and their occurrence at a large concentration scale, a complete lipidomic profiling of biological matrices remains challenging, especially in clinical contexts. Using supercritical fluid chromatography coupled with high-resolution mass spectrometry, we have developed and validated an untargeted lipidomic approach to the profiling of plasma and blood. Moreover, we have tested the technique using the Dry Blood Spot (DBS) method and found that it allows for the easy collection of blood for analysis. To develop the method, we performed the optimization of the separation and detection of lipid species on pure standards, reference human plasma (SRM1950), whole blood, and DBS. These analyses allowed an in-house lipid data bank to be built. Using the MS-Dial software, we developed an automatic process for the relative quantification of around 500 lipids species belonging to the 6 main classes of lipids (including phospholipids, sphingolipids, free fatty acids, sterols, and fatty acyl-carnitines). Then, we compared the method using the published data for SRM 1950 and a mouse blood sample, along with another sample of the same blood collected using the DBS method. In this study, we provided a method for blood lipidomic profiling that can be used for the easy sampling of dry blood spots.