Sub-100 Μm Research Articles

A vibrating membrane ejector for direct ink writing of printed electronics

Direct ink writing (DIW) represents a technical branch of additive manufacturing technology, particularly suitable for prototyping or small-batch printing production of printed electronic components. However, the existing print heads required for near or sub-100 μm line width are quite sophisticated, limiting the accessibility and application of the DIW method. This paper reports the use of the vibrating membrane ejector (VME) as a new option for the print head of DIW. The structure of the VME-based print head was specially designed for this purpose. Finite element modeling and analysis of the VME’s vibration characteristics were performed to provide insights into the ejection conditions and behaviors. The factors influencing the size of printed structures were identified and analyzed through the printing of a metal–organic complex silver (Ag) ink. After optimizing several operational parameters to limit the spreading effects and suppress the satellite droplets, the DIW printed line width has reached about 100 μm. The effectiveness of the VME-based print head was further demonstrated through the DIW fabrication of interdigitated electrodes and microstrip transmission lines. This highlights the versatility of the VME-based print head as a practical tool for device prototyping and ink development in the field of printed electronics.

A high resolution dilatometer using optical fiber interferometer.

We introduce a high-performance differential dilatometer based on an all-fiber Michelson interferometer at cryogenic temperature with 10-10 resolution in δL/L. It resolves the linear thermal expansion coefficient by measuring the oscillating changes of sample thickness and sample temperature with the interferometer and in situ thermometer, respectively. By measuring the linear thermal expansion coefficient α near the antiferromagnetic transition region of BaFe2As2 as a demonstration, we show that our dilatometer is able to measure thin samples with sub-pm-level length change resolution and mK-level temperature resolution. Despite the residual background thermal expansion of a few nm/K in the measurement results, our new dilatometer is still a powerful tool for the study of phase transition in condensed matter physics, especially has significant advantages in fragile materials with sub-100 μm thickness and being integrated with multiple synchronous measurements and tuning thanks to its extremely high resolution and contactless nature. The prototype design of this setup can be further improved in many aspects for specific applications.

Spectral micro-CT for simultaneous gold and iodine detection, and multi-material identification

Multiple energy bin spectral micro-CT (SμCT) is an advanced imaging technique that allows multi-material decomposition according to their specific absorption patterns at a sub-100 μm scale. Typically, iodine is the preferred CT contrast agent for cardiovascular imaging, while gold nanoparticles have gained attention in recent years owing to their high absorption properties, biocompatibility and ability to target tumors.In this work, we demonstrate the potential for multi-material decomposition through SμCT imaging of a test sample at the PEPI lab of INFN Trieste. The sample, consisting of gold, iodine, calcium, and water, was imaged using a Pixirad1/PixieIII chromatic detector with multiple energy thresholds and a wide spectrum (100 kV) produced by a micro-focus X-ray tube. The results demonstrate the simultaneous detection and separation of the four materials at a spatial scale of 35 μm, suggesting the potential of this technique in improving material detectability and quantification in a range of pre-clinical applications, including cardiovascular and oncologic imaging.

Well-defined in-textile photolithography towards permeable textile electronics

Textile-based wearable electronics have attracted intensive research interest due to their excellent flexibility and breathability inherent in the unique three-dimensional porous structures. However, one of the challenges lies in achieving highly conductive patterns with high precision and robustness without sacrificing the wearing comfort. Herein, we developed a universal and robust in-textile photolithography strategy for precise and uniform metal patterning on porous textile architectures. The as-fabricated metal patterns realized a high precision of sub-100 µm with desirable mechanical stability, washability, and permeability. Moreover, such controllable coating permeated inside the textile scaffold contributes to the significant performance enhancement of miniaturized devices and electronics integration through both sides of the textiles. As a proof-of-concept, a fully integrated in-textiles system for multiplexed sweat sensing was demonstrated. The proposed method opens up new possibilities for constructing multifunctional textile-based flexible electronics with reliable performance and wearing comfort.

High-pressure plasma etching up to 9 atm toward uniform processing inside narrow grooves of high-precision X-ray crystal optics

We developed a new etching technique using plasma generated at high pressure up to 9 atm. Operating at 9-atm pressure with a 30-μm-diameter wire electrode, we demonstrated the generation of well-ordered plasma at a narrow gap of ∼10 μm between the electrode and workpiece, and realized a high spatial resolution of <40 μm during processing. This technique should allow for the processing of high-precision X-ray crystal optical devices with compact and complex structures, such as a micro channel-cut crystal monochromator with an extremely narrow (sub-100 μm width) groove for realization of Fourier-transform-limited X-ray lasers with high intensity.

Insights into the composition and assembly mechanism of microbial communities on intertidal microsand grains

IntroductionMarine microorganisms are essential in marine ecosystems and have always been of interest. Currently, most marine microbial communities are studied at the bulk scale (millimeters to centimeters), and the composition, function and underlying assembly mechanism of microbial communities at the microscale (sub-100 micrometers) are unclear.MethodsThe microbial communities on microsand grains (40–100 µm, n = 150) from marine sediment were investigated and compared with those on macrosand grains (400–1000 µm, n = 60) and bulk sediments (n = 5) using amplicon sequencing technology.ResultsThe results revealed a significant difference between microsand grains and macrosand grains. Microsand grains had lower numbers of operational taxonomic units (OTUs(97%)) and predicted functional genes than macrosand grains and bulk-scale samples. Microsand grains also showed greater intersample differences in the community composition and predicted functional genes than macrosand grains, suggesting a high level of heterogeneity of microbial communities at the microscale. Analyses based on ecological models indicated that stochastic processes dominated the assembly of microbial communities on sand grains. Consistently, cooccurrence network analyses showed that most microbial cooccurrence associations on sand grains were highly unstable. Metagenomic sequencing and further genome-scale metabolic modeling revealed that only a small number (1.3%) of microbe pairs showed high cooperative potential.DiscussionThis study explored the microbial community of marine sediments at the sub-100 µm scale, broadening the knowledge of the structure and assembly mechanism of marine microbial communities.

Anti-Reflective Coatings Produced via Atomic Layer Deposition for Hybrid Polymer 3D Micro-Optics.

The increasing demand for optics quality requires the lowest optical power loss, which can occur from unwanted reflections. Laser direct writing (LDW) allows for the fabrication of complex structures, which is particularly advantageous in micro-optic applications. This research demonstrates the possibility of forming an anti-reflective coating on hybrid polymer micro-lenses fabricated by employing LDW without changing their geometry. Such coating deposited via atomic layer deposition (ALD) decreased the reflection from 3.3% to 0.1% at a wavelength of 633 nm for one surface of hybrid organic-inorganic SZ2080™ material. This research validates the compatibility of ALD with LDW 3D multiphoton lithography synergistically, expanding its applications on optical grade sub-100 μm scale micro-optics.

Rapid Micromolding of Sub-100 µm Microfluidic Channels Using an 8K Stereolithographic Resin 3D Printer.

Engineering microfluidic devices relies on the ability to manufacture sub-100 micrometer fluidic channels. Conventional lithographic methods provide high resolution but require costly exposure tools and outsourcing of masks, which extends the turnaround time to several days. The desire to accelerate design/test cycles has motivated the rapid prototyping of microfluidic channels; however, many of these methods (e.g., laser cutters, craft cutters, fused deposition modeling) have feature sizes of several hundred microns or more. In this paper, we describe a 1-day process for fabricating sub-100 µm channels, leveraging a low-cost (USD 600) 8K digital light projection (DLP) 3D resin printer. The soft lithography process includes mold printing, post-treatment, and casting polydimethylsiloxane (PDMS) elastomer. The process can produce microchannels with 44 µm lateral resolution and 25 µm height, posts as small as 400 µm, aspect ratio up to 7, structures with varying z-height, integrated reservoirs for fluidic connections, and a built-in tray for casting. We discuss strategies to obtain reliable structures, prevent mold warpage, facilitate curing and removal of PDMS during molding, and recycle the solvents used in the process. To our knowledge, this is the first low-cost 3D printer that prints extruded structures that can mold sub-100 µm channels, providing a balance between resolution, turnaround time, and cost (~USD 5 for a 2 × 5 × 0.5 cm3 chip) that will be attractive for many microfluidics labs.

High-energy parametric oscillator and amplifier pulsed light source at 2-µm.

A laser system generating high-energy pulses at 2-µm wavelength with pulse widths tunable from 10-24 ns is described. It comprises an optical parametric oscillator that generates mJ-level signal seed radiation and an optical parametric amplifier that boosts the output to 800 mJ of combined signal and idler when pumped with 2 J pulses of 1064-nm laser light. The system operated with KTP crystals and running at 10 Hz repetition rate is characterized in the spatial, temporal, and spectral domains. The effect of saturation leads to an output pulse approaching flat-top spatial and box-shaped temporal profiles, as desired in various applications. The amplified pulses can be imaged down to sub-100 µm diameters, making this laser system a suitable driver for plasma sources of extreme ultraviolet light.

Spectrally tunable ultrashort monochromatized extreme ultraviolet pulses at 100 kHz

We present the experimental realization of spectrally tunable, ultrashort, quasi-monochromatic extreme ultraviolet (XUV) pulses generated at 100 kHz repetition rate in a user-oriented gas high harmonic generation beamline of the Extreme Light Infrastructure—Attosecond Light Pulse Source facility. Versatile spectral and temporal shaping of the XUV pulses is accomplished with a double-grating, time-delay compensated monochromator accommodating the two composing stages in a novel, asymmetrical geometry. This configuration supports the achievement of high monochromatic XUV flux (2.8 ± 0.9 × 1010 photons/s at 39.7 eV selected with 700 meV full width at half maximum bandwidth) combined with ultrashort pulse duration (4.0 ± 0.2 fs using 12.1 ± 0.6 fs driving pulses) and small spot size (sub-100 µm). Focusability, spectral bandwidth, and overall photon flux of the produced radiation were investigated, covering a wide range of instrumental configurations. Moreover, complete temporal (intensity and phase) characterization of the few-femtosecond monochromatic XUV pulses—a goal that is difficult to achieve by conventional reconstruction techniques—has been realized using a ptychographic algorithm on experimentally recorded XUV-infrared pump–probe traces. The presented results contribute to in situ, time-resolved experiments, accessing direct information on the electronic structure dynamics of novel target materials.

Toward Near-Foldable Surface Light Sources with Ultimate Efficiency: Ultrathin Substrates Embedded with Micron-Scale Inverted Lens Arrays

Foldable organic light-emitting diodes (OLEDs) are essential building blocks for portable devices with expandable screens as well as more futuristic systems such as wearable or body-attachable electronic devices. Although various approaches have been proposed to realize foldable OLEDs, the efficiency enhancement techniques developed for their rigid counterparts are not always applicable due to the strict thickness limitations, making it challenging to achieve very high efficiency in a foldable OLED. Here, we propose ultrathin substrates embedded with an inverted microlens array (IMLA) as a platform on which to design and realize OLEDs that can be bent at sub-100 μm bending radius while also exhibiting very high light outcoupling efficiency. By noting the periodic arrangement of the patterns in the IMLA, the potential effects of optical diffraction on the overall emission pattern and efficiency enhancement are carefully analyzed by incorporating a bidirectional scattering distribution function via a trans-scale approach. Neutral-plane engineering is also done with finite element method simulations that examine the effect of the IMLA structures on the local modulation of the strain and stress in ultrathin devices, where the feature size of the IMLA is comparable to the overall thickness of the whole device. With the proposed method, highly efficient foldable OLEDs are demonstrated that show the maximum external quantum efficiency to be as high as 58% without optical side effects and that can withstand 10,000 trials of repeated folding cyclic tests at a bending radius of 50 μm.

Indirect Time-of-Flight with GHz Correlation Frequency and Integrated SPAD Reaching Sub-100 µm Precision in 0.35 µm CMOS.

The purpose of this work is to prove the suitability of integrated single-photon avalanche diode (SPAD)-based indirect time-of-flight (iTOF) for sub-100 µm precision depth sensing using a correlation approach with GHz modulation frequencies. For this purpose, a prototype containing a single pixel consisting of an integrated SPAD, quenching circuit, and two independent correlator circuits was fabricated in a 0.35 µm CMOS process and characterized. It achieved a precision of 70 µm and a nonlinearity of less than 200 µm at a received signal power of less than 100 pW. Sub-mm precision was achieved with a signal power of less than 200 fW. These results and the simplicity of our correlation approach underline the great potential of SPAD-based iTOF for future depth sensing applications.

Minimal Architecture Lithium Batteries: Toward High Energy Density Storage Solutions.

The coupling of thick and dense cathodes with anode-free lithium metal configuration is a promising path to enable the next generation of high energy density solid-state batteries. In this work, LiCoO2 (30 µm)/LiPON/Ti is considered as a model system to study the correlation between fundamental electrode properties and cell electrochemical performance, and a physical model is proposed to understand the governing phenomena. The first cycle loss is demonstrated to be constant and independent of both cathode thickness and anode configuration, and only ascribed to the diffusion coefficient's abrupt fall at high lithium contents. Subsequent cycles achieve close to 100% coulombic efficiency. The examination of the effect of cathode thickness demonstrate a nearly linear correlation with areal specific capacity for sub-100 µm LiCoO2 and 0.1 mA cm-2 current density. These findings bring new insights to better understand the energy density limiting factors and to suggest potential optimizationapproaches.

In situ formation of micro/nano phase composite for 3D printing clinically relevant bioresorbable stents

With recent developments in materials engineering and additive manufacturing, the feasibility of patient-specific biomedical devices has increased substantially. Bioresorbable vascular stents/scaffolds (BVS), implants which reopen narrowed blood vessels, have seen considerable research in freeform fabrication as one such potentially customizable medical device. However, clinical requirements for stents place significant limits on manufacturing; the device must maintain the vessel's natural diameter once it has been reopened and must have sub-100 μm radial thickness to allow proper blood flow in small diameter vessels. Recent commercialization challenges for BVSs have highlighted the importance of meeting these requirements. For example, the first BVS marketed in the U.S.A., made from polylactide, had a radial thickness of 150 μm, which potentially contributed to negative side-effects and reduced efficacy. Thus, new bioresorbable materials and manufacturing strategies are required to fabricate BVSs that have sub-100 μm feature sizes that are mechanically competent and safe. In this work, we report the innovative use of a two-phase system that enables in situ formation of semicrystalline poly-l-lactic acid nanofibrous networks within a 3D printed polymeric matrix of a bioresorbable citrate-based biomaterial used for the first time in a resorbable medical device recently approved by the Food and Drug Administration. The optimized composite ink is compatible with the high-resolution micro-continuous liquid interphase production method with demonstrated smallest printable features of 80 μm. The resulting composite material has a significantly improved Young's modulus of 969.55 MPa at the fully hydrated state, a 108% improvement over the previously reported pure citrate-based biomaterial materials. We have successfully fabricated the BVS with strut thicknesses less than 100 μm and demonstrated that the stent can sustain applied vessel loading under physiological blood pressure conditions. The fabrication method can potentially be broadly applied to other biomedical devices.

A Simple Approach to MXene Micropatterning from Molecularly Driven Assembly.

Here, a micropatterning strategy is demonstrated to achieve stable and selective MXene adsorption through the molecularly driven assembly. MXene flakes were assembled by strong interaction with a silicon substrate, which was functionalized by microcontact printing (μCP) to create an active surface. A clear micropattern was observed by scanning electron microscopy showing uniform coverage of MXene flakes. Atomic force microscopy revealed a pattern thickness of around 50 nm, much thinner than the patterns obtained by direct μCP. The obtained micropattern presents good stability against rinsing and sonication. X-ray photoelectron spectroscopy shows that this stability can be attributed to strong covalent bonding between MXene and active molecules on a silicon substrate. The sheet resistance of the as-formed MXene layer was measured at around 154.67 (Ω/□), which is lower than those of other published techniques with a similar thickness of around 50 nm. This method can achieve a well-defined MXene pattern around the sub-100 μm scale without requiring prior MXene surface modification. Therefore, MXene can retain its intrinsic surface property, allowing further molecule adsorption as a sensing platform. Moreover, this patterning technique does not require complicated control of ink preparation and offers possible application on a substrate of any geometry with few layers of thickness.

Range-precision improvement of a time-of-flight range sensor using dual reference plane sampling.

This study aimed to achieve high range precision in the sub-100 µm order with time-of-flight (TOF) range imaging for 3-D scanners. The precision of a TOF range imager was improved using dual reference plane sampling (DRPS). DRPS using two short-pulse lasers reduces driver jitter, which limits the range precision below sub-100 µm. A proof-of-concept measurement system implemented using a TOF range imager demonstrated the reduction in driver jitters, resulting in reduced column-to-column variation in range precision. The developed system also achieved a high precision of 52 µm using a single frame and 27 µm using a 10-frame average.

Spatially-resolved characterization of oil-in-water emulsion sprays

When an oil-in-water emulsion is utilized for application in a flat-fan spray, micrometer-sized oil droplets are thought to facilitate hole formation on the spray lamella, leading to an earlier breakup of the spray sheet and an increase in resulting droplet sizes. However, prior work has largely focused on changes to the mean or median droplet size, and has not examined the influence of oil-in-water emulsions on the complete droplet size distribution, as well as other droplet properties such as droplet shape and droplet velocity distributions in flat fan sprays. This study concerns the effects of pressure, spatial location, and application of oil emulsions on the resulting droplet size, eccentricity, as well as velocity distributions, all of which are crucial information in determining the dispersion dynamics of the droplets during the spray applications. Experiments were conducted with a TP6515 nozzle, with the abovementioned droplets information measured using digital inline holography (DIH). Results show that the DIH-inferred volumetric droplet size distributions (VDSD) span widely from sub-100 μm to over 2 mm in size. The application of an oil-in-water emulsion results largely in suppression of smaller droplets, while the VDSD is relatively insensitive to increasing the oil volume fraction beyond a critical level. DIH results are consistent with the observation that smaller ligaments are observed only in the breakup regions for the single-phase water sprays, which break up more violently and earlier than larger ligaments. It is these smaller ligaments that are suppressed in the oil-in-water emulsion, which yield sub-millimeter droplets, some with sizes approaching sub-100 μm dimensions, corresponding to driftable sizes in agricultural settings. Interestingly, the application of oil-in-water emulsion generally decreases the eccentricity more significantly at the center than at the edge of the spray fan. We attribute this decrease to the increase in lamella sheet thickness and thus decrease in characteristic shrinkage rates, consistent with observations of high speed shadowgraphs. In all instances, oil-in-water emulsion droplets have higher velocities than equivalent sized water droplets. We attribute this to the earlier action of the spray breakup process in the oil-in-water emulsion, reduced surface energy generation during breakup (larger droplets), and reduced energy dissipation during breakup with oil-in-water emulsions, leading to increased translational energy after the breakup process. Therefore, it appears that oil-in-water emulsion application simultaneously suppresses small droplet formation and increases droplet velocity, and hence spray penetration in agricultural application.

Micromechanical mapping of the intact ovary interior reveals contrasting mechanical roles for follicles and stroma

Follicle development in the ovary must be tightly regulated to ensure cyclical release of oocytes (ovulation). Disruption of this process is a common cause of infertility, for example via polycystic ovary syndrome (PCOS) and premature ovarian insufficiency (POI). Recent ex vivo studies suggest that follicle growth is mechanically regulated, however, crucially, the actual mechanical properties of the follicle microenvironment have remained unknown. Here we use atomic force microscopy (AFM) spherical probe indentation to map and quantify the mechanical microenvironment in the mouse ovary, at high resolution and across the entire width of the intact (bisected) ovarian interior. Averaging over the entire organ, we find the ovary to be a fairly soft tissue comparable to fat or kidney (mean Young's Modulus 3.3±2.5 kPa). This average, however, conceals substantial spatial variations, with the overall range of tissue stiffnesses from c. 0.5–10 kPa, challenging the concept that a single Young's Modulus can effectively summarize this complex organ. Considering the internal architecture of the ovary, we find that stiffness is low at the edge and centre which are dominated by stromal tissue, and highest in an intermediate zone that is dominated by large developmentally-advanced follicles, confirmed by comparison with immunohistology images. These results suggest that large follicles are mechanically dominant structures in the ovary, contrasting with previous expectations that collagen-rich stroma would dominate. Extending our study to the highest resolutions (c. 5 μm) showed substantial mechanical variations within the larger zones, even over very short (sub-100 μm) lengths, and especially within the stiffer regions of the ovary. Taken together, our results provide a new, physiologically accurate, framework for ovarian biomechanics and follicle tissue engineering.

Investigating the material modelling of a polymeric bioresorbable scaffold via in-silico and in-vitro testing

The accurate material modelling of poly-l-lactic acid (PLLA) is vital in conducting finite element analysis of polymeric bioresorbable scaffolds (BRS) to investigate their mechanical performance and seek improved scaffold designs. To date, a large variety of material models have been utilised, ranging from simple elasto-plastic models to high fidelity parallel network models. However, no clear consensus has been reached on the appropriateness of these different models and whether simple, less computationally expensive models can serve as acceptable approximations. Therefore, we present a study which explored the use of different isotropic and anisotropic elasto-plastic models in simulating the balloon expansion and radial crushing of the thin-strut (sub-100 μm) ArterioSorbTM BRS using the Abaqus/Explicit (DS SIMULIA) solution method. Stress–strain data was obtained via tensile tests at two different displacement rates. The use of isotropic and transversely isotropic elastic theories was explored, as well as the implementation of stress relaxation in the plastic regime of the material. The scaffold performance was quantified via its post-expansion diameter, percentage recoil and radial strength. The in-silico results were validated via comparison with in-vitro data of an analogous bench test. Accurately predicting both the post-expansion scaffold shape and radial strength was found to be challenging using the in-built Abaqus models. Therefore, a novel user-defined material model was developed via the VUMAT subroutine which improved functionality by facilitating a variable yield ratio, dependent upon the plastic strain as well as stress relaxation in overly strained elements. This achieved prediction of the radial strength within 1.1% of the in-vitro results and the scaffold’s post-expansion diameter within 6.7%. A realistic multi-balloon simulation strategy was also used which confirmed that a mechanism exists in the PLLA which facilitates the extremely low percentage recoil behaviour observed in the ArterioSorbTM BRS. This could not be captured by the aforementioned material property models.

Multifunctional sub-100 µm thickness flexible piezo/triboelectric hybrid water energy harvester based on biocompatible AlN and soft parylene C-PDMS-Ecoflex™

Nanogenerators have emerged recently as a new technology for harvesting energy from renewable and clean energy sources. Water in nature carries high amounts of kinetic and electrostatic energy; it is ubiquitous and widely accessible in different forms: i.e. as droplets, flows or waves. Either piezoelectric or triboelectric nanogenerators (PENGs, TENGs) have been shown to be effective for harvesting energy from liquids and ocean but the integration of both transduction mechanisms in a single hybrid device allows to exploit several operating conditions and to optimize performances, overcoming the limits of single components. Current piezo-tribo hybrid devices are mostly based on scarcely durable polymers or thick lead-based ceramic materials. Additionally, they are often limited to a specific application or environment due to their architecture and employed materials. In this work, a multifunctional, flexible and conformal hybrid nanogenerator (HNG) has been developed with a sub-100 µm thickness and with a novel combination of biocompatible thin-film piezo-ceramic and soft polymeric materials, for harvesting energy of different water sources, i.e. impacts, raindrops and buoying waves. The PENG component is based on a double-sided metallized AlN thin film, sputtered on polyimide. The TENG component is made of a metallized porous patch made of a mixture of PDMS and platinum-catalyzed silicone (Ecoflex™), encapsulated by a friction film of Parylene C surface-treated with UV/ozone. As a result, the HNG exhibits non-algebraic enhanced performances: the resulting power densities under tapping are ~ 6.5 mW/m 2 for PENG, 65 mW/m 2 for TENG, ~ 230 mW/m 2 for HNG. Multifunctionality is demonstrated by harvesting energy from different water-conveyed sources (i.e. impacts/breakwaters, raindrops, buoying waves). In particular, the device shows optimal and reliable energy harvesting performance under strong impulsive impacts (~ 0.8 W/m 2 ) and raindrops impacts (~ 9 mW/m 2 ). A custom buoyant device, called piezo-JellyFish (pJF), is proposed to exploit the HNGs for harvesting wave energy, based on a connection of three HNGs acting as oral arms: this system yields ~ 3.2 mW/m 2 , with 3 cm-amplitude standing waves. Finally, the HNG exhibits optimal adhesion on the skin and can be also used for monitoring human motions, revealing its multifunctionality also as a wearable conformal sensor. • The hybridization of piezoelectric and triboelectric nanogenerators is effective and allows to enhance performances. • A multifunctional, sub-100 µm thickness, flexible and conformal hybrid nanogenerator is developed for water energy harvesting. • The HNG is based on a novel combination of biocompatible thin-film AlN and soft parylene–PDMS–Ecoflex. • The HNG exhibits enhanced performances for tapping, impacts, raindrops and water waves, through a piezo-JellyFish system. • The HNG exhibits optimal skin-adhesion, revealing its multifunctionality as a wearable conformal sensor.