Band States Research Articles

Tunable Three-Wavelength Fiber Laser and Transient Switching between Three-Wavelength Soliton and Q-Switched Mode-Locked States

We report a passive mode-locked fiber laser that can realize single-wavelength tuning and multi-wavelength spacing tuning simultaneously. The tuning range is from 1528 nm–1560 nm, and up to three bands of soliton states can be output at the same time. These results are confirmed by a nonlinear Schrödinger equation model based on the split-step Fourier method. In addition, we reveal a way to transform the multi-wavelength soliton state into the Q-switched mode-locked state, which is period doubling. These results will promote the development of optical communication, optical sensing and multi-signal pulse emission.

First-principles study of the effect of alkali metals on the electronic and optical properties of SnS2

In this paper, the photovoltaic properties of alkali metal atom X ( X is Li, Na, K, and Rb) doped monolayer SnS2 system have been investigated based on first principles calculations. After the doping of alkali metal atoms, the bond lengths of the doped systems increase compared to the pure SnS2 system. When alkali metal atoms are doped in the pure SnS2 system, the band gap of the doped systems increases and the SnS2 system changes from an indirect band gap to a direct band gap. It is found that the density of states in the valence band near the Fermi energy level of all doped systems is primarily contributed by S atoms, and the conduction band is primarily contributed by Sn and S atoms. The ionic bonds are formed between X and S atoms. The polarizability of the doped SnS2 systems is enhanced. Moreover, the absorption and reflection peaks of the SnS2 doping systems are redshifted, which improves the effective utilization rate of the infrared light region.

Symmetry-enforced double Weyl points, multiband quantum geometry, and singular flat bands of doping-induced states at the Fermi level

Symmetry-enforced double Weyl points, multiband quantum geometry, and singular flat bands of doping-induced states at the Fermi level

Peculiarities of Eu3+ Photoluminescence in Opal Photonic Crystal Films and Heterostructures Based of Them

Single opal films and heterostructures based on them grown by the method of vertically moving meniscus are characterized by the reflection spectroscopy technique and then impregnated with the Eu(CH3COO)3 × H2O salt. The suppression of the Eu3+ ion emission in single opal films is clearly detected within the photonic stop-band range. The weaker manifestation of this effect in heterostructures is more likely due to interface defects causing both the appearance of permitted states in the photonic stop band and the scattering of radiation in the direction of observation. With the further impregnation of opal films with glycerol to reduce the dielectric contrast from 1.85 to 1.13, the emission spectrum is mainly determined by the Eu3+ coordination environment effects accompanied with the broadening of bands and the spectral intensity redistribution.

Effect of pressure on the structure transitions and electronic properties of the organic semiconducting Bis(salicylaldehyde) crystal

The structure, electronic, and optical properties of bis(salicylaldehyde) crystal under 0–300 GPa pressure are calculated by density functional theory (DFT). By comparing the lattice parameters (i.e., lattice constants, bond lengths, and bond angles) under different pressures, it is found that the lattice parameters are sensitive to pressure and change complicatedly with pressure. Furthermore, the analysis of the electronic structure shows that the crystal is an indirect bandgap semiconductor at 0 GPa and becomes a conductor at 115, 155, and 185 GPa, respectively, where the far- and near-Fermi levels density of states (DOS) in the valence band are mainly contributed by the O-2s orbital electrons, the joint effect of the C-2p and the O-2p orbital electrons respectively. Dielectric function studies have shown that it exhibits novel optical properties as the pressure increases, leading to different photoelectric properties.

Modeling the Conduction Mechanism in Chemoresistive Gas Sensor Based on Single-Crystalline Sn3O4 Nanobelts: A Phenomenological In Operando Investigation.

Investigating the sensing mechanisms in semiconducting metal oxide (SMOx) gas sensors is essential for optimizing their performance across a wide range of potential applications. Despite significant progress in the field, there are still many gaps in comprehending the phenomenological processes occurring in one-dimensional (1D) nanostructures. This article presents the first insights into the conduction mechanism of chemoresistive gas sensors based on single-crystalline Sn3O4 nanobelts using the operando Kelvin Probe technique. From this approach, direct current (DC) electrical resistance and work function changes were simultaneously measured in different working conditions, and a correlation between the conductance and the surface band bending was established. Appropriate modeling was proposed, and the results revealed that the conduction mechanism in the single-crystalline one-dimensional nanostructures closely aligns with the behavior observed in single-crystalline epitaxial layers rather than in polycrystalline grains. Based on this assumption, relevant parameters were further estimated, including Debye length, concentration of free charge carriers, effective density of states in the conduction band, and position of the Fermi level. Overall, this study provides an effective contribution to understanding the role of surface chemistry in the transduction of the electrical signal generated from gas adsorption in single-crystalline one-dimensional nanostructures.

Electronic, optical and charge transport properties of Zn-porphyrin-C60 MOFs: a combined periodic and cluster modeling.

Density functional theory (DFT) calculations were performed on the 5,15 meso-positions of nine porphyrin-containing MOFs; Zn2(TCPB)-(NMe2-ZnP); (H4TCPB = 1,2,4,5-tetrakis(4-carboxyphenyl)benzene), (NMe2-ZnP = [5,15-bis[(4-pyridyl)-ethynyl]-10,20-bis-(dimethylamine) porphinato]zinc(II)) functionalized with nitrogen-, oxygen-, and sulfur-containing groups to study their effects on the electronic, optical and transport properties of the materials. The properties of these materials have also been investigated by encapsulating fullerene (C60) in their pores (C60@MOFs). The results indicate that the guest C60 in the MOF generates high photoconductivity through efficient porphyrin/fullerene donor-acceptor (D-A) interactions, which are facilitated by oxygen and sulfur functionalities. DFT calculations show that C60 interacts favorably in MOFs due to negative Eint values. Encapsulated C60 molecules modify the electronic band structure, affecting the conduction band and unoccupied states of MOFs corresponding to C60 p orbitals. TD-DFT calculations show that incorporating C60 promotes D-A interactions in MOFs, leading to charge transfer in the near-infrared and visible photoinduced electron transfer (PET) from porphyrins to C60. Nonequilibrium Green's function-based calculations for MOFs with sulfur group, with and without C60, performed using molecular junctions with Au(111)-based electrodes show increased charge transport for the doped MOF. These insights into tuning electronic/optical properties and controlling charge transfer can aid in the design of new visible/near-infrared MOF-based optoelectronic devices.

Two-dimensional topological semimetals: an emerging candidate for terahertz detectors and on-chip integration.

The importance of terahertz (THz) detection lies in its ability to provide detailed information in a non-destructive manner, making it a valuable tool across various domains including spectroscopy, communication, and security. The ongoing development of THz detectors aims to enhance their sensitivity, resolution and integration into compact and portable devices such as handheld scanners or integrated communication chips. Generally, two-dimensional (2D) materials are considered potential candidates for device miniaturization but detecting THz radiation using 2D semiconductors is generally difficult due to the ultra-small photon energy. However, this challenge is being addressed by the advent of topological semimetals (TSM) with zero-bandgap characteristics. These semimetals offer low-energy excitations in proximity to the Dirac point, which is particularly important for applications requiring a broad detection range. Their distinctive band structures with linear energy-momentum dispersion near the Fermi level also lead to high electron mobility and low effective mass. The presence of topologically protected dissipationless conducting channels and self-powered response provides a basis for low-energy integration. In order to establish paradigms for semimetal-based THz detectors, this review initially offers an analytical summary of THz detection principles. Then, the review demonstrates the distinct design of devices, the excellent performance derived from the topological surface state and unique band structures in TSM. Finally, we outline the prospective avenues for on-chip integration of TSM-based THz detectors. We believe this review can promote further research on the new generation of THz detectors and facilitate advancements in THz imaging, spectroscopy, and communication systems.

Spin polarized electron dynamics enhance water splitting efficiency by yttrium iron garnet photoanodes: a new platform for spin selective photocatalysis.

This work presents a spectroscopic and photocatalytic comparison of water splitting using yttrium iron garnet (Y3Fe5O12, YIG) and hematite (α-Fe2O3) photoanodes. Despite similar electronic structures, YIG significantly outperforms widely studied hematite, displaying more than an order of magnitude increase in photocurrent density. Probing the charge and spin dynamics by ultrafast, surface-sensitive XUV spectroscopy reveals that the enhanced performance arises from (1) reduced polaron formation in YIG compared to hematite and (2) an intrinsic spin polarization of catalytic photocurrents in YIG. Ultrafast XUV measurements show a reduction in the formation of surface electron polarons compared to hematite due to site-dependent electron-phonon coupling. This leads to spin polarized photocurrents in YIG where efficient charge separation occurs on the Td sub-lattice compared to fast trapping and electron/hole pair recombination on the Oh sub-lattice. These lattice-dependent dynamics result in a long-lived spin aligned hole population at the YIG surface, which is directly observed using XUV magnetic circular dichroism. Comparison of the Fe M2,3 and O L1-edges show that spin aligned holes are hybridized between O 2p and Fe 3d valence band states, and these holes are responsible for highly efficient, spin selective water oxidation by YIG. Together, these results point to YIG as a new platform for highly efficient, spin selective photocatalysis.

β and γ vibrations in the IBM

The properties of β- and γ-bands are analyzed in the framework of the IBM. It is shown that the general features of the observed excitation energies and the transition probabilities to the ground state band can be explained simply in terms of the intrinsic states of the IBM.

Results from Exploratory Work in Li-Rich Regions of the AE-Li-Ge Systems (AE = Ca, Sr, Ba)

The compounds AELi2Ge (AE = Ca, Sr and Ba) were synthesized, and their structures were determined as a part of the exploratory work in the Li-rich regions of the respective ternary systems. The three compounds are isostructural, and their crystal structure is analogous with the orthorhombic structure of BaLi2Si and KLi2As (space group Pmmn). The atomic arrangement can be viewed as an intergrowth of corrugated AEGe layers, alternated with slabs of Li atoms, suggestive of the possible application of these phases as electrode materials for lithium-ion batteries. Both experimental electronic density and calculated electronic structure suggest the existence of Li–Li and Li–Ge interactions with largely covalent character. Despite that, the valence electrons can be partitioned as (AE2+)(Li+)2(Ge4–), i.e., the title compounds can be viewed as valence-precise Zintl phases. The band structure calculations for BaLi2Ge show that a bona fide energy gap in the band structure does not exist and that the expected poor metallic behavior is originated from the AEGe sub-lattice and related to hybridization of Ba5d and Ge3p states in the valence band in proximity of the Fermi level. In addition, electrochemical measurements indicate that Li atoms can be intercalated into CaGe with a maximum capacity of 446 mAh/g, close to the theoretical value of 480 mAh/g of CaLi2Ge, which reveals the possibility of this Li-rich compound to be used as an electrode in Li-ion batteries.

In English

In mini-review, deals with the theory of exciton quasimolecules in a nanosystem consisting of double quantum dots of germanium synthesized in a silicon matrix. An exciton quasimolecule was formed as a result of the interaction of two spatially indirect excitons. It is shown that, depending on the distance D between the surfaces of the quantum dots, spatially indirect excitons and of exciton quasimolecules was formedin the nanosystem.The binding energy of the singlet ground state of the exciton quasimolecule has been gigantic exceeding the binding energy of the biexciton in a silicon single crystal by almost two orders of magnitude. The emergence of a band of localized electron states in the band gap of the silicon matrix was found. This band of localized electron states appeared as a result of the splitting of electron levels in the chain of germanium quantum dots. The nature of formation in the Ge/Si heterostructures was analyzed depending on the distance D between the surfaces of QDs SIEs and of exciton quasimolecules.It was shown that the binding energy of the ground singlet state of an exciton quasimolecule was gigantic, exceeding the binding energy of a biexciton in a silicon single crystal by almost two orders of magnitude.The possibility of using quasimolecules of excitons to create elements of silicon infrared nanooptoelectronics, including new infrared sensors, was established. The emergence of a band of localized electron states in the band gap of the silicon matrix was found.In this case, the band of localized electron states appeared as a result of the splitting of electron levels in the chain of germanium QDs.It was shown that the movement of an electron along the zone of localized electron states in the linear chain of germanium QDs caused an increase in photoconductivity.The effect of increasing photoconductivity can make a significant contribution in the process of converting the energy of the optical range in photosynthesizing nanosystems.

Transitional character of Nd-Dy (N=90) isotones in IBM model

The Interacting Boson Model is used to study the level structure of ground state, beta, and gamma bands in150Nd, 152Sm, 154Gd and 156Dy (N = 90) isotones. The energy ratios R_((I+2)⁄2) and R_(0_2⁄2_1 ) are compared to the predictions of U(5), SU(3), and X(5) symmetry. The calculated reduced transition probabilities as well as quadrupoles moments were compared to experimental data. IBM-1 investigates the properties of the potential energy surface to determine the nuclear shape of the Nd-Dy (N=90) isotones.

Simultaneous pseudospin and valley topological edge states of elastic waves in phononic crystals made of distorted Kekulé lattices

Topological metamaterials protected by the spatial inversion symmetry mainly support single type edge state, interpreted by either the quantum valley Hall effect or the quantum spin Hall effect. However, owing to the existence of the complicated couplings and waveform conversions during elastic wave propagation, realizing topologically protected edge states that support both pseudospin and valley degrees of freedom in elastic system remains a great challenge. Here, we propose a two-dimensional Kekulé phononic crystal (PC) that can simultaneously possess pseudospin- and valley-Hall edge states in different frequency bands. By inhomogeneously changing the elliptical direction in a Kekulé lattice of elliptical cylinders, three complete phononic bandgaps exhibiting distinct topological phase transitions can be obtained, one of which supports a pair of pseudospin-Hall edge states and the other hosts valley-Hall edge states in the low and high frequency regime. Furthermore, a sandwiched PC heterostructure and a four-channel cross-waveguide splitter are constructed to achieve selective excitation and topological robust propagation of pseudospin- and valley-momentum locking edge states in a single configuration. These results provide new possibilities for manipulating in-plane bulk elastic waves with both pseudospin and valley degrees of freedom in a single configuration, which has potential applications for multiband and multifunctional waveguiding.

Size Effect in Correlation-Driven Charge Migration in Correlation Bands of Alkyne Chains.

Correlation-driven charge migration initiated by inner-valence ionization leading to the population of the correlation bands of alkyne chains containing between 4 and 12 carbon atoms is explored through ab initio simulations. Scaling laws are observed, both for the time scale of the charge migration and for the slope of the density of states of the correlation bands. These can be used for predicting the relaxation time scale in much larger systems from the same molecular family and for finding promising candidates for the development of an attochemistry scheme taking advantages of the specificity of the dynamics in the correlation bands of molecules.

Antiferromagnitnyy eksitonnyy dielektrik

The effective the two-band Hamiltonian is obtained for iridium oxides with account for strong electron correlations (SEC) and the spin–orbit interaction. The intraatomic electron correlations in iridium ions induce the formation of Hubbard fermions (HF) filling the states in the valence band. Another consequence of SEC is associated with the emergence of the antiferromagnetic (AFM) exchange interaction between HF in accordance with the Anderson mechanism. As a result, a long-range antiferromagnetic order is established in the system, and in the conditions of band overlapping, the intersite Coulomb interaction induces a phase transition to the excitonic insulator (EI) state with a long-range AFM order. The system of integral self-consistent equations, the solution to which determines the excitonic order parameter components Δi, j(k), sublattice magnetization M, Hubbard fermion concentration nd, and chemical potential μ, is obtained using the atomic representation, the method of two-time temperature Green’s functions, and the Zwanzig–Mori projection technique. The symmetry classification of AFM EI phases is performed, and it is shown that in the nearest neighbor approximation, state Δi, j(k) with the s-type symmetry corresponds to the ground state, while the phases with the d- and p-symmetries are metastable.

Paramagnetic two-dimensional silicon-oxide from natural silicates

Silicon dioxide’s potential for having magnetic properties is fascinating, as combining its electronic capabilities with magnetic response seems promising for spintronics. In this work, the mechanisms that drive the change from diamagnetic behavior in pure silicates like SiO2 to paramagnetic behavior in transition metal-doped silicates like Rhodonite silicate (CaMn3Mn(Si5O15)) are explored. This naturally occurring Rhodonite (R)-silicate was thinned down while retaining its magnetic properties by liquid-phase scalable exfoliation. Exfoliating R-silicate into the two-dimensional (2D) structure by LPE increases magnetic coercivity, and the internal resistance to demagnetization (ΔHc) up to ∼23.95 Oe compared to 7.08 Oe for its bulk phase. DFT spin-polarized calculations corroborate those findings and explain that the origin of the magnetic moment comes mainly from the Mn in the doped 2D silicate due to the asymmetrical components of the Mn d and Si p states in the valence band. This result is further illustrated by the spin component differential charge densities showing that Mn and Si atoms display a residual up spin charge. Rhodonite’s unusual magnetic behavior has considerable potential for spintronics, data storage, and sensing technologies. Understanding the complex relationships between the structural, magnetic, and electronic properties of silicates is essential for developing new materials and composites as well as for driving future research.

Enhanced Photocatalytic Activity of π-Conjugated Pyridine Rings-Modified C3N4/Bi@BiOCl Z-Scheme Heterogeneous Material.

The enhanced photocatalytic properties of Z-Scheme Bi@BiOCl/C3N4-DPY heterojunction materials were successfully prepared by the ultrasonic-assisted coprecipitation method. The Bi@BiOCl/C3N4-DPY heterojunction exhibited remarkable photocatalytic activity under visible light irradiation, and the degradation rate of methyl orange (MO) was about 90.6% in 180 min. This impressive efficiency is mainly due to the Z-Scheme charge transfer mechanism in Bi@BiOCl/C3N4-DPY, resulting in the efficient separation of charge carriers and an increase in the REDOX potential of photogenerated electrons and holes. C3N4 was modified with a π-deficient conjugated pyridine ring, which caused the light absorption redshift, promoted the formation of oxidizing •O2-, and improved the photocatalytic activity. At the same time, a well-aligned heterojunction is formed at the interface between C3N4-DPY and BiOCl, facilitating the seamless transfer of light-induced electrons from the LUMO of C3N4-DPY to the CB of BiOCl. In addition, the addition of Bi introduces a unique band gap reduction effect, resulting in a change in the density of the band states, which further promotes charge transfer and separation. It is worth noting that the introduction of metallic bismuth (Bi) brings about a unique band gap reduction effect, resulting in a change in the density of states within the band, which ultimately promotes charge transfer and separation. The Z-scheme charge migration inside Bi@BiOCl/C3N4-DPY further promotes the efficient separation of photogenerated electron-hole pairs, greatly improving the overall efficiency of the material. The Z-structured photocatalyst developed in this study has great application potential in various fields of photocatalysis.

Calculation of the Density of the Distribution of Electronic States in the Conduction Band from the Fundamental Absorption Spectra of Amorphous Semiconductors

The region of fundamental absorption in the optical spectra of amorphous semiconductors is theoretically studied using the Davis-Mott approximation according to the Kubo-Greenwood formula. As is known, three types of optical transitions of the electron can be observed in the fundamental absorption region; from the tail of the valence band to the conduction band, from the valence band to the conduction band and from the valence band to the tail of the conduction band. For all these electronic transitions, analytical expressions of the partial absorption spectra are obtained from two different types of the Kubo-Greenwood formula. The width of the optical mobility gap and the proportionality coefficient were determined in the analytical form of the interband absorption spectrum by fitting them to the experimental interband absorption spectrum. A new method is presented for calculating the density of distribution of electronic states in the conduction band of amorphous carbon based on the experimental interband absorption spectrum and the analytical expression of the Kubo-Greenwood formula written for the interband absorption spectrum.

Ab-initio calculation of halogen elements effect on the behavior of new double perovskite Cs2InSbX6 (X = F, Cl, Br, I): 1st part structural and optoelectronic properties

In recent years, there has been a growing fascination with lead-free perovskite materials, particularly in the realms of solar energy and photonics. It is imperative to conduct comprehensive theoretical investigations of these materials to effectively guide experimental pursuits. In this research, we harnessed the power of density functional theory (DFT) calculations, employing the Wien2k code, to delve into the distinctive characteristics of double-perovskite halides Cs2InSbX6 (X = F, Cl, Br, I). The viability and stability of their cubic structures were meticulously assessed, taking into consideration essential metrics such as the tolerance factor, octahedral factor and formation energy. Notably, the pronounced influence of spin–orbit coupling necessitated gap energy adjustments, achieved through a dual-pronged approach utilizing the generalized Perdew–Burke–Ernzerhof gradient approximation (PBE-GGA) and the modified Becke-Johnson (mBJ) exchange potential. The intricacies of band structure and state density were scrutinized using the GGA + mBJ method. The comprehensive findings elucidate that these compounds manifest fundamental electronic bandgaps spanning a range from 0.26 to 2.67 eV. Furthermore, they exhibit remarkably low carrier effective masses and a substantial degree of band dispersion. Of significance is the profound influence of halogen atom substitutions on their optical properties. Notably, a high absorption coefficient in the ultraviolet spectrum and the presence of a negative real dielectric function provide strong evidence for the adoption of metallic properties within a specific energy range. These compelling outcomes underscore the potential of these materials as highly promising candidates for a diverse array of photonic applications.