Evaporation Source Research Articles

Formation mechanisms of persistent extreme precipitation events over the eastern periphery of the Tibetan Plateau: Synoptic conditions, moisture transport and the effect of steep terrain

The eastern periphery of the Tibetan Plateau (EPTP) is prone to frequent and severe Persistent Extreme precipitation (PEP) events in summer. Given the complexity of weather systems and the intricate nature of terrain over this region, the generation and development mechanisms of the PEP in the EPTP remain to be determined. In this study, the formation and persistence mechanisms are further explored from the perspective of the general features of large-scale circulations, moisture source diagnosis and the influence of steep topography by using a thermal-dynamical diagnosis method, a mesoscale numerical simulation and a Lagrangian identification of the main moisture sources. The results show that during PEP events, the corresponding atmospheric circulation systems are characterized by an anomalous Rossby wave train at middle levels, an intensified westerly jet, an eastward extension of the South Asian high and a westward extension of the western Pacific subtropical high, all of which are possible to facilitate the development of potential instability and anticyclonic convergence of water vapor transport. The evaporative moisture sources from the Southeastern Asia (SEA), Bay of Bengal (BOB), and Southern China Sea (SCS) are remarkably enhanced during PEP events, with a contribution of 56.44%, which is 28.5% higher than the climatic mean. The further sensitive experiment indicates that the steep terrain could enhance the continuous transport of positive potential vorticity and the downward propagation of upper-level isentropic potential vorticity disturbances, thereby playing an essential role in the triggering and development of PEP events.

Hydrogen isotope records of long-chain alkanes from the monsoon boundary zone over the last 2400 years in North China

The East Asian Summer Monsoon (EASM) plays a key role in the climate dynamics of East Asia, affecting the livelihood of millions of people by contributing to agriculture and water resources. The monsoon boundary zone (MBZ) is particularly sensitive to shifts in climate patterns. However, the complexity of water vapor sources in the region makes it difficult to understand precipitation processes. To address this issue, the records of lipid biomarker abundances and leaf wax stable hydrogen isotope composition of C31–alkanes (δDwax-C31) from a 238 cm sediment core extracted in Lake Dali, located at the northern edge of the EASM, were sampled and examined by 2 cm per sample. Based on analyses of the biogenic molecular indicators(biomarkers), precipitation isotopes, and other indicators of the evolution of the climate environment, we have reconstructed precipitation change history over the past 2400 years. The results show the decrease in alkanes concentrations, along with high A.I. values in Lake Dali sediments indicate an arid trend over the past 2400 years, which have led to a decrease in basin productivity and the development of grasslands. The low temperatures greatly limit the growth of C4 vegetation in this cold region, so the long-chain alkanes in the lake sediments is mainly derived from the leaf wax lipids of C3 vegetation in the grassland. The increase of Paq and the reduction of ACL indicate that the decrease of grass vegetation inputs in the basin and the outbreak of aquatic vegetation. Notably, aquatic vegetation outbreaks may be due to reduced precipitation leading to shrinking lakes and increased nutrients in the lakes. By comparing with the biogenic indicators of Lake Dali and other regional records, the δDwax-C31 value can be used as a proxy for the regional precipitation, with a gradual decrease from about −240 ‰ to about −190 ‰, which indicates a general decreasing trend in the precipitation in the last 2400 years. Specifically, in exception of some significant fluctuations on the centennial to millennial scale, δDwax-C31 value decrease by about 40 ‰ between 1800 and 1600 cal.a BP over a period of only 200 years. As we know, the diminishing solar radiation might lead to a weaker EASM and a reduction in precipitation. Thus, the decrease in regional temperature became the main reason for the anomalous negative precipitation isotope phenomenon due to the lower precipitation from 1800 to 1600 cal.a BP in the monsoon boundary zone (MBZ, this represents only the northern boundary). This study contributes to our understanding of δDwax-C31 within the MBZ and its significance as an indicator of rainfall processes. By analyzing this molecular proxy, the researchers gain insights into the past precipitation patterns and their implications for regional climate. Importantly, the study demonstrates the value of combining biogenic molecular indicators with geochemical indicators, as it leads to improved accuracy in reconstructing regional climate conditions. The findings shed light on long-term climate trends and provide a more comprehensive understanding of the historical impacts of climate change on the EASM region. Moreover, the study's contribution to interpreting the paleoclimate record is crucial for validating climate models used to project future climate scenarios. Overall, this research enhances our knowledge of regional climate dynamics and their implications, offering valuable insights for both historical analysis and future climate projections.

Low power silicon evaporation source—Construction, performances, and applications

The construction of a low power silicon evaporation source for thin film deposition applications is proposed in this article. A few differently shaped tungsten filaments were mounted inside a quartz glass crucible, which assured an effective heating of silicon wafer pieces. The sublimation process was monitored at filament powers in the range of 8–22 W, which corresponds to temperatures far below the melting point of Si. The operation of the evaporation source requires only the use of a low voltage power supply. All considered models of evaporation sources are characterized by an easy construction. The measurements carried out with the use of a quartz crystal microbalance sensor enabled to determine the deposition rate at different filament powers for all constructed Si sources and confirm the long-term stability of the silicon flux. The experimental data exhibit the Polany–Wigner dependence of the deposition rate as a function of inverse of power at higher filament powers. Auger electron spectroscopy was used to monitor the deposition of Si on Ag(100) under constant silicon flux. The Auger signal recorded from Si and Ag reflects the growth of subsequent silicon layers. This enabled the determination of the Frank–van der Merwe growth mode of Si on Ag(100) at early stages of growth, the formation time of one Si monolayer, and, thus, the deposition rate. The presented designs of the Si source exhibit long time stable evaporation fully controlled by the applied filament power, which is crucial in the precise adsorption of ultrathin Si layers.

Indoor Air Sources of Outdoor Air Pollution: Health Consequences, Policy, and Recommendations: An Official American Thoracic Society Workshop Report.

Indoor sources of air pollution worsen indoor and outdoor air quality. Thus, identifying and reducing indoor pollutant sources would decrease both indoor and outdoor air pollution, benefit public health, and help address the climate crisis. As outdoor sources come under regulatory control, unregulated indoor sources become a rising percentage of the problem. This American Thoracic Society workshop was convened in 2022 to evaluate this increasing proportion of indoor contributions to outdoor air quality. The workshop was conducted by physicians and scientists, including atmospheric and aerosol scientists, environmental engineers, toxicologists, epidemiologists, regulatory policy experts, and pediatric and adult pulmonologists. Presentations and discussion sessions were centered on 1) the generation and migration of pollutants from indoors to outdoors, 2) the sources and circumstances representing the greatest threat, and 3) effective remedies to reduce the health burden of indoor sources of air pollution. The scope of the workshop was residential and commercial sources of indoor air pollution in the United States. Topics included wood burning, natural gas, cooking, evaporative volatile organic compounds, source apportionment, and regulatory policy. The workshop concluded that indoor sources of air pollution are significant contributors to outdoor air quality and that source control and filtration are the most effective measures to reduce indoor contributions to outdoor air. Interventions should prioritize environmental justice: Households of lower socioeconomic status have higher concentrations of indoor air pollutants from both indoor and outdoor sources. We identify research priorities, potential health benefits, and mitigation actions to consider (e.g., switching from natural gas to electric stoves and transitioning to scent-free consumer products). The workshop committee emphasizes the benefits of combustion-free homes and businesses and recommends economic, legislative, and education strategies aimed at achieving this goal.

Linkage between precipitation isotopes and water vapor sources in the monsoon margin: Evidence from arid areas of Northwest China

Linkage between precipitation isotopes and water vapor sources in the monsoon margin: Evidence from arid areas of Northwest China

Highly stable mixed-phase Cs-Cu-I films with tunable optoelectronic properties for UVB photodetector applications.

Ultraviolet (UV) photodetector plays an important role in military, civilian and people's daily life, and is an indispensable part of spectral detection. However, photodetectors target at the UVB region (280-320 nm) are rarely reported, and the devices detected by medium-wave UV light generally have problems such as low detection rate, low sensitivity, and poor stability, which are difficult to meet the market application needs. Herein, Cs-Cu-I films with mixed-phase have been prepared by vacuum thermal evaporation. By adjusting the proportion of evaporation sources (CsI and CuI), the optical bandgaps of mixed-phase Cs-Cu-I films can be tuned between 3.7 eV and 4.1 eV. This absorption cut-off edge is exactly at both ends of the UVB band, which indicating its potential application in the field of UVB detection. Finally, the photodetectors based on Cs-Cu-I/n-Si heterojunction are fabricated. The photodetector shows good spectral selectivity for UVB band, and has a photoresponsivity of 22 mA/W, a specific detectivity of 1.83*1011 Jones, an EQE over 8.7% and an on/off ratio above 20.

Analysis and comparison of water vapor transport features and circulation anomalies during the super-strong Meiyu period of 2020 and 1998*

2020 and 1998 are the strongest Meiyu years in recent decades. The characteristics of the super-strong Meiyu precipitation and water vapor sources in 2020 and 1998 were compared, and the atmospheric circulation anomalies and the forcing factor SST were examined. (1) In 2020, the Meiyu duration, accumulated precipitation, and number of rainstorm days were greater than in 1998, and the highest since 1961. The Meiyu period in 2020 experienced 11 rainstorm processes. In 1998, a typical “second Meiyu” phenomenon occurred, and the area of heavy rainfall in 1998 was located further southward than that in 2020 (2) The contribution of the Bay of Bengal-South China Sea (BOB-SCS) to the total supply of water vapor in 2020 and 1998 was 43.0% and 42.0%, respectively, i.e., much higher than that of the climatological mean (25.5%). In 2020, the sources that provide most water vapor were the BOB, SCS, and central Pacific Ocean, while in 1998 were the Arabian Sea, BOB, and the western Pacific Ocean. (3) During the Meiyu period in 2020 and 1998, the position of atmospheric circulation pattern “two ridges and one trough” are different. Analysis of the vertical structure revealed that the specific humidity intensity above the area of heavy rainfall in 1998 was weaker than that in 2020, and the low-level convergence zone was further south and not as strong as in 2020. The positions of the western Pacific subtropical high (WPSH) and the western North Pacific anticyclone (WNPAC) in 1998 were both further south than those in 2020, which resulted in the more southerly locations of the southwesterly jet stream and rain belt. It should be pointed out that, the important contributions of the SST anomalies in the equatorial central eastern Pacific and the tropical Indian Ocean to the anomalous WNPAC in 1998 and 2020, respectively.

Research on the Identification of Typical Terrain Patterns in Yunnan Province Based on the K-Means Technology

Wire icing is a prevalent challenge in both industrial and scientific domains, and it is widely acknowledged that terrain and water vapor are significant contributing factors in the formation of wire icing. Consequently, the identification of terrains that are prone to inducing water vapor uplift serves as the scientific foundation for predicting ice accumulation on power lines. Yunnan Province, a mountainous province in China, features a large elevation difference. In winter, this region is prone to wire, pole and tower icing, which can affect power transmission and cause economic and property losses. Therefore, it is necessary to conduct research on the identification of typical terrain patterns in this region. In previous terrain studies, more attention has been focused on slope and aspect, watershed analysis and terrain profile analysis. When the purpose of the terrain identification is to analyze which terrains are more prone to collecting water vapor, we hope to obtain slightly larger terrain blocks and analyze the water vapor sources for different terrains in order to identify typical terrains that are conducive to icing formation. A new technology for identifying terrain patterns based on the K-means clustering method is proposed in this study to explore the typical terrain in Yunnan province. Additionally, the influences of different terrain patterns on water vapor movement are also analyzed. The results indicate that the typical terrains in Yunnan are “Valley-Air Channel”, “Topographic Uplifting”, “Ravine”, “Mountain Pass” and “Alpine Divide” patterns. The results show that the identified typical terrain is consistent with observations from satellite images, which verifies the effectiveness of this identification method. Among these five typical terrains, the “Valley-Air Channel”, the “Topographic Uplifting” and the “Mountain Pass” terrains are prone to collecting water vapor and forming ice cover. The “Alpine Divide” terrain is also prone to accumulating water vapor on both sides to form ice cover. The identified typical terrain demonstrates that typical terrain patterns near water bodies are more prone to the occurrence of wire, pole and tower icing because these areas are abundant in water vapor, and the extensive water vapor is easily condensed under the effects of terrain uplifting and cooling. In these key areas, existing wires and towers, as well as those to be constructed in the future, deserve our special attention.

АВТОМАТИЗИРОВАННАЯ ОЦЕНКА ЗОН ВОЗДЕЙСТВИЯ ОПАСНЫХ ФАКТОРОВ ПОЖАРА ПРИ РАЗЛИВЕ СЖИЖЕННОГО ПРИРОДНОГО ГАЗА В УСЛОВИЯХ ЧРЕЗВЫЧАЙНОЙ СИТУАЦИИ

The main stages of the development of an emergency situation during the bottling of liquefied natural gas are presented. A tree of events has been formed in the event of the occurrence and development of a fire hazardous situation associated with the destruction of a tank or process pipeline with liquefied natural gas. Possible regimes of liquefied natural gas spreading on a smooth underlying surface and the formation of a variable power vapor source are identified. Models of liquefied natural gas evaporation are studied in relation to the composition and possible thickness of the filling layer. It is shown that under the assumption that the two phases are in thermodynamic equilibrium. The vapor phase density of liquefied natural gas can be obtained by solving the Peng-Robinson equation using the Klosek-McKinley method for a given pressure and temperature, which is based on an empirical correlation for the molar volume of the liquefied natural gas mixture. A model of a fast phase transition is formed based on the solution of the Van den Berg equation and an algorithm that automates the procedure for assessing the zones of influence of dangerous fire factors during an liquefied natural gas spill.

Mechanisms of isotopic control of precipitation in the Yellow River source region

AbstractThe study of water vapour sources and water cycle patterns in the Yellow River source region is of great significance for ensuring water resource security in the arid and semi‐arid regions of northern China. We established a precipitation stable isotope observation system in the Yellow River source region for three consecutive years (2020–2022), systematically analysed the spatial and temporal distribution characteristics of precipitation stable isotopes 2H and 18O in the Yellow River source region and their interrelationships with environmental factors and topography, and explored the regional water vapour transport pathways by using the HYSPLIT model and combining with the global reanalysis data. The results show that: (1) the δ18O and δ2H values of precipitation in the Yellow River source region follow the seasonal pattern, with the first half of the year being richer than the second half of the year; (2) the spatial variations of δ18O of precipitation in the Yellow River source region show a low in the southwest and a high in the northeast; (3) the water vapour source in the source area is basically stable, and the complex transport paths and the cross‐effects of the local factors determine the stable isotope characteristics of the water, and the stable isotope characteristics of the water are determined by the cross‐effects of the local factors, because the source of the water vapour and the local factors such as the height will not change significantly in the short term. Since the source of water vapour and local elevation factors will not change significantly in the short term, the precipitation pattern in the source area of the Yellow River can be considered to be basically stable.

Growth and characterization of epitaxial films based on semimagnetic Pb1−xEuxTe solid solutions on various substrates

This paper presents the results of a study of the growth and structure properties of Pb[Formula: see text]EuxTe, ([Formula: see text]) epitaxial films with 0.5–1[Formula: see text][Formula: see text]m thickness, grown on BaF2 and SiO2 substrates oriented in the (111) direction, by the molecular beam condensation method in a vacuum of 10[Formula: see text] Pa with the use of an additional compensating source of Te vapor during the growth process. The optimal conditions for obtaining structurally perfect ([Formula: see text]–100[Formula: see text]) epitaxial films were established: [Formula: see text]–623[Formula: see text]K; [Formula: see text]K; [Formula: see text]–9 Å/s. It was determined that conductivity inversion occurs at the temperature of the compensating source 410[Formula: see text]K.

High-Speed Schlieren Imaging of Vapor Formation in Electrospray Plume.

Previous mechanistic descriptions of electrosprays mostly focused on the dynamics of Taylor cones, initial droplets, and progeny droplets. However, vapor formation during droplet desolvation in an electrospray plume has not been discussed to a great extent. Here, we implement a double-pass on-axis schlieren high-speed imaging system to observe generation and propagation of vapors in an offline electrospray source under different conditions. Switching between turbulent and laminar vapor flow was observed for all of the scanned conditions, which may be attributed to randomly occurring disturbances in the sample flow inside the electrospray emitter. Calculation of mean vapor flow velocity and analysis of vapor flow patterns were performed using in-house developed image processing programs. Experiments performed at different electrospray voltages (0-6 kV), solvent flow rates (100-600 μL min-1), and methanol concentrations (50-100%), indicate only a weak dependency between electrospray voltage and mean vapor velocity, implying that the vapor is mostly neutral; thus, the vapor is not accelerated by electric field. On the other hand, electrospraying solutions of analytes (with mass 151 Da or 12 kDa) did not remarkably increase the overall vapor flow velocity. The source of vapor's velocity is attributed to the inertia of the electrospray droplets. Although there are some differences between a modern electrospray ionization (ESI) setup and the setup used in our experiment (e.g., using a higher flow rate and larger emitter), we believe the findings of our study can be projected to a modern ESI setup.

Characterizing Isotopic Composition and Trajectories of Atmospheric River Events

Landfalling atmospheric rivers (LARs) are important drivers of mid-latitude climate; however, our understanding of the water vapour sources, storm trajectories, and receiving waters of ARs is limited. This study aims to characterize LARs in southwest British Columbia by their isotopic composition and storm track trajectories and to better understand how AR-derived precipitation is manifested in watershed waters. ARs were depleted (−11.71‰ δ18O, −85.80‰ δ2H, n = 19) compared to non-ARs (−9.47‰ δ18O, −69.58‰ δ2H, n = 32) (p = 0.03); however, the difference is minimal. LAR storm tracks did not show any obvious correlation to their isotopic composition, despite the large variability in their source regions across the Pacific Ocean. The lack of correlation is attributed to mixing air parcels, thereby incorporating moisture with different isotopic compositions into the main transport mechanism. D-excess values for ARs and non-ARs were statistically similar, although seasonal differences were observed. ARs with higher d-excess were sourced from the central Pacific, whereas ARs with lower d-excess had storm tracks through the northern Pacific. Watershed water d-excess values (mean = 8.58 ± 2.97‰) were more similar to winter precipitation (mean = 10.1 ± 5.1‰), compared to summer (mean = 2.8 ± 4.3‰), likely due to their source of winter precipitation at high elevation. A greater range in AR d-excess winter values relative to summer values (3.6–16.6‰, −0.3–6.0‰, respectively) is attributed to storm track variability.

Experimental verification of the novel transcritical CO2 heat pump system and model evaluation method

This work proposes a novel method for verifying the accuracy of the numerical simulation model of the compression/ejector transcritical CO2 heat pump system using convolutional neural networks. The method focuses on converting the original unequal input conditions into equal input conditions and comparing the simulation results with the experimental prediction results of each component. The validation results reveal the following findings: 1) The root mean square errors of the gas cooler and the water source evaporator are 9.16 °C and 11.47 °C respectively, indicating that future work should focus on correcting of the CO2 heat transfer coefficient calculation method; 2) The verification results of the evaporator indicate that suggesting the need to incorporate an air dynamic change module in the air source input; 3) The root mean square error of the CO2 outlet pressure in the ejector is 462.45 kPa. It can be inferred from the pressure variation trend that the limit pressure ratio of the compressor is the main factor affecting the accuracy of the ejector model. Overall, this article presents a novel and effective method for verifying the accuracy of numerical models.

Direct growth Bi2O2Se nanosheets on SiO2/Si substrate for high-performance and broadband photodetector

Bi2O2Se, a newly emerging two-dimensional (2D) material, has attracted significant attention as a promising candidate for optoelectronics applications due to its exceptional air stability and high mobility. Generally, mica and SrTiO3 substrates with lattice matching are commonly used for the growth of high-quality 2D Bi2O2Se. Although 2D Bi2O2Se grown on these insulating substrates can be transferred onto Si substrate to ensure compatibility with silicon-based semiconductor processes, this inevitably introduces defects and surface states that significantly compromise the performance of optoelectronic devices. Herein we employ Bi2Se3 as the evaporation source and oxygen reaction to directly grow Bi2O2Se nanosheets on Si substrate through a conventional chemical vapor deposition method. The photodetector based on the Bi2O2Se nanosheets on Si substrate demonstrates outstanding optoelectronics performance with a responsivity of 379 A W−1, detectivity of 2.9 × 1010 Jones, and rapid response time of 0.28 ms, respectively, with 532 nm illumination. Moreover, it also exhibits a broadband photodetection capability across the visible to near-infrared range (532–1300 nm). These results suggest that the promising potential of Bi2O2Se nanosheets for high-performance and broadband photodetector applications.

Separation of the Asian summer monsoon and local precipitation from stalagmite oxygen isotope records in Eastern China during the last millennium

The Asian summer monsoon (ASM) regulates water vapor and heat transport across the East Asian continent and has a significant impact on patterns of regional precipitation. However, assessment of the long-term association between the monsoon and precipitation in different regions remains difficult due to spatial chronological differences and uncertainties in interpretation of climate proxies. This study provides a novel insight into the interpretation of stalagmite oxygen isotopes (δ18O) records and obtained synchronous ASM index series and precipitation variations in Northern China (NC), Central China (CC), and Southwestern China (SWC) over the last 1134 years (850–1983CE). The results show that the ASM index sequence is consistent with the trend evident in the monsoon intensity records from the region upstream of the water vapor source, which represents the response to the inter-hemispheric temperature dominated by effective solar radiation (ESR). Reconstruction precipitation data were in general agreement with the existing paleo-hydrological records of the regions, confirming the reliability and chronological accuracy of the reconstruction. Correlation analysis highlighted the significant regional heterogeneity in the destabilizing relationship between precipitation and the monsoon over the past millennium in Eastern China at sub-centennial scales. Specifically, the precipitation-monsoon relationships in three regions, NC, CC, and SWC, might be related to the North Atlantic Oscillation (NAO), the position of the intertropical convergence zone (ITCZ), and solar activity, respectively. Moreover, at the millennial scale, a certain positive correlation between precipitation and ASM in NC and SWC was identified, whereas there was a weaker correlation between precipitation and ASM in CC. This study represents an attempt to further interpret the stalagmite δ18O record, which can be generalized to larger and longer time scales.

Photovoltaic panel and wind turbine as an electric energy source for water evaporation and desalination

The purpose of the article is to study the process of heating and desalination of seawater due to electricity from wind turbines and solar panels. This electric current is collected and transmitted through wires to be used to power electrical devices. The advantages of using solar panels as an alternative energy source include environmental cleanliness, long service life, no noise, low cost of operation and no emissions of harmful substances. Boiling water using wind turbine energy is a great way to use renewable wind energy to support daily activities. By placing a wind turbine in an area with a steady wind, the turbine can collect kinetic energy from the air and convert it into mechanical energy that can be used to rotate the generator. This generator can then convert mechanical energy into electrical energy, which can be used to power an electric boiler. The boiler can then use electrical energy to heat the water, producing steam to boil the water.

Analysis and simulation of ecological environment response of ground source heat pump system under thermal equilibrium

This work is designed to study the thermodynamic equations of groundwater source heat pump in hot summer and cold winter, and to determine the optimal operating conditions of groundwater source heat pump by means of the thermodynamic analysis of source heat pump, flow, unit, pump power, evaporation side and condensation side. Practice has proved that the equipment runs stably and with high efficiency. By comparison, the ground source heat exchangers were compared with conventional chillers and boiler. The results showed that the underground heat pump had higher energy consumption, lower primary energy consumption, reduced CO2 emissions, and reduced environmental pollution during operation, proving that the underground heat pump had obvious advantages over the conventional cooling and heating system. Meanwhile, this also shows that the long-term operation of ground heating system has caused the instability of ground heating system, the accumulation of cold and heat in ground-water, and the variation of ground temperature, which not only reduces the system efficiency, but it also affects the physical properties of soil itself and the soil heat flow, and will also cause changes in soil microbial environment and vegetation ecological environment, thus affecting the whole ecological environment.

Ocean air masses from the East Asian monsoon dominate the land‐surface atmospheric water cycles in the coastal areas of Liaodong Bay, Northeast China

AbstractLong‐term atmospheric water vapour hydrogen (δ2H), oxygen (δ18O) and deuterium excess (d‐excess) can provide unique insights into the land‐atmosphere coupling processes. The in‐situ measurements of atmospheric water vapour δ2H, δ18O and d‐excess were conducted above a reed wetland of Liaodong Bay (2019–2020). We found significant inter‐annual variations in atmospheric water vapour isotopes between the two growing (May–September) seasons. The δ2H, δ18O and d‐excess of atmospheric water vapour exhibited different seasonal and diurnal cycles concerning the vertical measurement heights, especially in 2019. The isotopic differences of atmospheric water vapour among vertical measurement heights were more evident in the daytime. Rainfall events directly impacted the diurnal patterns of water vapour isotopes, and the influences depended on rainfall intensities. However, only weak correlations existed between water vapour isotopes and local meteorological factors (R2 = 0.01–0.16, p < 0.001), such as water vapour concentration (w), Relative Humidity (RH) and surface air temperature (Ta). Based on the back‐air trajectory analyses, the spatial–temporal dynamics of atmospheric water vapour isotopes are highly synchronized with monsoon activities. Different water vapour sources influence the water vapour isotope in this region and the higher d‐excess value is related to the intense convection brought by the monsoon. High‐resolution measurements of atmospheric water vapour isotopes will improve our understanding of the hydrological cycles in coastal areas.

Industrieschnee: An overview of some European anthropogenic snowfall events, with a case study from Bern (Switzerland)

AbstractIndustrieschnee or anthropogenic snowfall is a local winter hazard in many European cities and towns under suitable anticyclonic conditions and in the vicinity of persistent local water vapour sources and air pollution. Here, we overview the formation of Industrieschnee and describe a case study event from Bern, Switzerland, comparing the estimated mass of snow deposited with the water vapour emissions from a local incinerator. We speculate that previous European Industrieschnee events may have been considerably under‐reported, or falsely attributed to surface hoar frost (reif) or the accretion of rime (raureif).