Source Model Research Articles

Development of aircraft noise simulation framework J-FRAIN based on component-wise sound source models

In order tomake detailed and accurate predictions of aircraft noise around airports, we have developed “J-FRAIN”, a new aircraft noise simulation framework that can precisely predict the time histories of noises emitted from each major aircraft noise source during the landing approach phase at ground observation points. This article describes the elements of the developed framework—data acquisition, sound source modeling, propagation modeling, and ground noise prediction—and present some application examples. To develop the framework, we first deployed a 30m-diameter microphone array under the final approach path to an international airport to measure acoustic maps of several civil aircraft types in flight. The sound powers of major aircraft noise-emitting components were then estimated quantitatively by domain integration of the deconvolved acoustic maps at five emission angles in the plane of the glideslope, and the directivities of each noise source were determined. Next, component-wise sound source regression models for engines and airframe noise sources were created based on the physical relationships between engine rotation speed, airspeed, and the deployment angle of high-lift devices, and the coefficients in each model were determined to minimize the root-mean-square error between the measured and predicted sound power levels. The phenomena of atmospheric absorption and ground effect during the propagation of radiated sounds were also incorporated into the framework. Actual flight parameter values were used as inputs to the completed framework, and it was confirmed that the predicted time histories of sound pressure levels on the ground agreed with measured data to within 2 dB if ground effect was properly considered. Finally, as sample applications that use the unique features of the proposed J-FRAIN framework, the article discusses the evaluation of the contributions of each aircraft noise source at noise observation points under the final approach path to the airport and the impact assessment of flight operations on noise.

Petroleum system assessment of the Beni Suef Basin, Western Desert, Egypt

Within the northwestern Desert of Egypt, the Beni Suef Basin is one of the most significant hydrocarbon basins. After over 50 years of exploration and production, the main challenge today is to locate new areas that are prolific to oil and gas production. The study aims to identify potential drilling locations by integrating geochemical methods, 1D and 2D basin modelling, well log analysis, seismic interpretation, and hydrocarbon migration pathways. Results show that the Lower Kharita shale contain both oil and gas generating kerogen with generating potential that ranges from fair to very good. The source rocks within the Lower Kharita are mature (main oil window) and have a transformation ratio of up to 60% based on 1D basin modeling. The modelled 2D vitrinite reflectance map showed that hydrocarbon generation occurred at depths greater than 10850 ft (3306 m) with vitrinite reflectance values greater than 0.65% in both the northern and southern parts of the Beni Suef Field. Two main reservoirs were studied. The lower Bahariya and upper Kharita reservoirs are composed of well to moderately sorted sandstone. The subsurface structural maps, reservoirs, source, and charge modeling maps have been constructed to show the migration pathways and accumulation areas. There are three accumulation areas identified. The first accumulation area is located in the high structure up-dip section of the major normal fault, and migration direction is from northwest. The second and third accumulation areas are located in the low structure and down-dip from the normal fault, with migration of hydrocarbons from southeast. The latter two areas should be tested by drilling in the future.

Accurate Registration of Cross-Modality Geometry via Consistent Clustering.

The registration of unitary-modality geometric data has been successfully explored over past decades. However, existing approaches typically struggle to handle cross-modality data due to the intrinsic difference between different models. To address this problem, in this article, we formulate the cross-modality registration problem as a consistent clustering process. First, we study the structure similarity between different modalities based on an adaptive fuzzy shape clustering, from which a coarse alignment is successfully operated. Then, we optimize the result using fuzzy clustering consistently, in which the source and target models are formulated as clustering memberships and centroids, respectively. This optimization casts new insight into point set registration, and substantially improves the robustness against outliers. Additionally, we investigate the effect of fuzzier in fuzzy clustering on the cross-modality registration problem, from which we theoretically prove that the classical Iterative Closest Point (ICP) algorithm is a special case of our newly defined objective function. Comprehensive experiments and analysis are conducted on both synthetic and real-world cross-modality datasets. Qualitative and quantitative results demonstrate that our method outperforms state-of-the-art approaches with higher accuracy and robustness. Our code is publicly available at https://github.com/zikai1/CrossModReg.

Spatial Structure of the Radio‐Frequency Noise Field in a Large City

AbstractThe urban radio‐frequency (RF) noise generated by our cities continues to change with time. Although models exist to describe the RF noise as functions of frequency and urban land use types, very few models describe the spatial character or structure of the noise on the scales of city blocks (50–150 m). The goal of this work is to investigate the connection between urban morphology and the higher‐order spatial statistics of the noise field. To achieve this goal, a large measurement campaign was conducted in Boston, Massachusetts. Many spatial measurements allowed for calculation of spatial correlation functions of noise power in three different neighborhoods, which were used to quantify the spatial structure of the fields. A statistical point source model is then developed, with adjustable parameters relating to urban morphology. Good agreement between the model and the experimental correlation functions suggests the 25 MHz urban noise field is well described by a random network of fixed point sources, radiating with a 1/r power law behavior.

Regional soundscape modeling of the Atlantic Outer Continental Shelfa).

The ocean soundscape is a complex superposition of sound from natural and anthropogenic sources. Recent advances in acoustic remote sensing and marine bioacoustics have highlighted how animals use their soundscape and how the background sound levels are influenced by human activities. In this paper, developments in computational ocean acoustics, remote sensing, and oceanographic modeling are combined to generate modelled sound fields at multiple scales in time and space. Source mechanisms include surface shipping, surface wind, and wave fields. A basin scale model is presented and applied to the United States Atlantic Outer Continental Shelf (OCS). For model-data comparison at a single hydrophone location, the model is run for a single receiver position. Environmental and source model uncertainty is included in the site-specific modeling of the soundscape. An inversion of the local sediment type is made for a set of sites in the OCS. After performing this inversion, the qualitative comparison of the modelled sound pressure level (SPL) time series and observed SPL is excellent. The quantitative differences in the mean root mean square error between the model and data is less than 3 dB for most sites and frequencies above 90 Hz.

Application of melt pool profiles for parameter calibration of Goldak’s heat source model

Goldak’s ellipsoidal heat source model is widely accepted in laser powder bed fusion (LPBF) process simulations. The model is dependent on three inherent flux distribution parameters and absorptivity which need to be calibrated before application. However, the uniqueness of the calibrated heat source parameters has not been established, which is crucial to accurately represent the energy density distribution in numerical studies. This paper proposed a novel parametric optimization method that can uniquely calibrate these four heat source parameters with high accuracy. Both the simulated cross-sectional (CS) profile and the mid-front (MF) profile of the melt pool were used during calibration. The differences between the experimental and simulated profiles formed the objective function of the parametric optimization problem, which was calculated by using the least power norm method on the deviations between melt pool boundary curves. A genetic algorithm (GA) with elitism selection approach was employed to optimize the heat source parameters by minimizing this single objective function value. To theoretically verify the applicability of the method, two theoretical case studies involving two distinct sets of heat source parameters were carried out. A unique solution of Goldak’s heat source parameters with less than 2 % error can be achieved within 50 generations of the optimization process. A single-track experiment was conducted to demonstrate the application of the proposed method in a real scenario. The CS and MF melt pool profiles were extracted and the calibration procedure was applied. The profiles from simulation with the calibrated heat source parameters exhibited a good agreement with experimental results. The calibrated parameters were used to simulate multi-track printing on a single layer for validation of the proposed method. The CS melt pool profiles obtained from the multi-track simulation and multi-track experiment agreed well, which validated the accuracy of the proposed calibration method and its utility in obtaining the key Goldak heat source parameters for LPBF simulation.

Ray tracing heat source model for polymer powder bed fusion considering laser energy absorption and multiple reflection

Powder bed fusion is considered one of the most promising additive manufacturing technologies, but the generation and evolution of volumetric heat source involved in the powder bed fusion process remain unclear as laser-powder bed interactions has not been fully developed. In this work, a ray tracing model is established to simulate the laser-powder bed interaction during the powder bed fusion process. Five types of powder beds with homogeneous and non-homogeneous particle radius distributions are generated using the discrete element method, and then the energy distributions in the ray tracing heat source are explored by considering laser energy absorption and multiple reflection. The results indicate that the energy distribution in the ray tracing heat source basically exhibits a Gaussian-like trend in the horizontal plane and an exponential decay in the vertical direction. The fitting coefficients Z0 (related to laser power) and η2 (related to laser radius) of the ray tracing heat source for different powder beds show maximum differences of 21.87 % and 72.22 %, respectively, compared to conventional Gaussian volumetric heat sources. The deviation between the fitting coefficient η3 (related to laser energy attenuation) and the corresponding fitted attenuation coefficient of the powder bed is related to the overall uniformity of the powder bed. Due to multiple reflections of the laser within the powder bed, the ray tracing heat source has larger width and depth as compared to Gaussian volumetric heat source. This study is significant because it provides a more accurate heat source model for the reliable prediction and safe operation of powder bed fusion process.

Noise coupling reduction using temperature enhanced device for future integrated circuit integration applications

<p>Information technology-to-internet of things may have succeeded because of fast silicon chip capability expansion. Moore's law, which reduces device size, boosted integrated circuit (IC) performance. Delay rises with highdensity connection parasitic capacitance. Interconnect delays have surpassed transistor delays and slowed progress. An alternative is required now to reduce connection latency. The third dimension is used in popular 3D IC technology IC technology requires through silicon via (TSV) for signal integrity and heat mitigation. Noise coupling hinders electrical communication between signal-carrying TSVs (aggressive TSVs) and ground TSVs (victim TSVs), a 3D IC bottleneck. TSVs must be dielectrically insulated from Si substrates to avoid electrical signal interference. Additionally, first-order modelling will confirm the suggestions. This article proposes using the nanosheet field effect transistor (NSFET) to overcome 3D IC noise coupling and complementary metal oxide semiconductor (CMOS) technology nodes. After discussing the electronic industry and sub nm, several basic metrics and criteria for developing electronic components are presented. The first technique uses Perylene-N's exceptional noise-cancelling characteristics. Second technique uses electrical TSV (ETSV), thermal TSV (TTSV), and heat source models to measure noise coupling on numerous ICs. The third proposes many noise-reducing materials. The suggested structures outperform traditional approaches.</p>

Finite Element Modeling of Ring and Gaussian Dual Laser Heat Sources for Aluminum Butt Welding

Aluminum alloys have been used extensively for automotive industries for the structural applications with their high specific strength and corrosion resistance. In order to use aluminum alloys for automotive components, laser welding has been used due to the advantage of being capable to weld thick products due to its deep penetration depth. In this regard, a dual laser heat source combining an outer ring laser beam with a centrally focused Gaussian laser beam was proposed to compensate for insufficient melting caused by laser reflection of aluminum alloy. The purpose of this study is to develop a simulation model that can consider heat input from the dual laser beams individually, for analyzing melting and heat distribution behavior during the laser welding. Two different heat source models were proposed. One model used 3D Gaussian distribution of heat input for the centrally focused laser while the other model utilized Gaussian cylinder heat input. The proposed heat input models were implemented by finite element analyses, and the results were compared with aluminum butt welding experiments. It was shown that Gaussian cylinder heat input for the centrally focused laser beam reproduced much better the experimentally observed melting behavior in comparison to the 3D Gaussian distribution.

Unveiling lens light complexity with a novel multi-Gaussian expansion approach for strong gravitational lensing

ABSTRACT In a strong gravitational lensing system, the distorted light from a source is analysed to infer the properties of the lens. However, light emitted by the lens itself can contaminate the image of the source, introducing systematic errors in the analysis. We present a simple and efficient lens light model based on the well-tested multi-Gaussian expansion (MGE) method for representing galaxy surface brightness profiles, which we combine with a semi-linear inversion scheme for pixelized source modelling. Testing it against realistic mock lensing images, we show that our scheme can fit the lensed images to the noise level, with relative differences between the true input and best-fitting lens light model remaining below 5 per cent. We apply the MGE lens light model to 38 lenses from the HST SLACS sample. We find that the new scheme provides a good fit for the majority of the sample with only 3 exceptions – these show clear asymmetric residuals in the lens light. We examine the radial dependence of the ellipticity and position angles and confirm that it is common for a typical lens galaxy to exhibit twisting non-elliptical isophotes and boxy / disky isophotes. Our MGE lens light model will be a valuable tool for understanding the hidden complexity of the lens mass distribution.

Determination of residual stress field in laser cladding using finite element updating method driven by contour deformation

Laser cladding is a cutting-edge technology widely used in additive manufacturing and surface modification. This process entails rapid melting and solidification driven by laser heating, which induces residual stress within the material. This study presents a data-driven approach to refine the numerical model of laser cladding, simultaneously emphasizing both the temperature characteristics and residual stress distribution within the thermomechanical coupling process. After integrating the residual stress distribution data obtained through the contour method with the molten pool morphology shaped by the thermal effects of laser cladding, a Levenberg-Marquardt optimization algorithm based finite element model updating scheme is proposed to efficiently identify the parameters of double ellipsoid heat source model, which employs parallel computing to reduce the computational time for iterations. The effectiveness of the proposed method is validated using experimental data. Moreover, this approach is adaptable, unaffected by the specimen size and shape, and can accurately predict the residual stress distribution characteristics. Therefore, it offers a robust framework for simulating the mechanisms of residual stress generation in titanium alloy laser cladding.

Impact of Multiple Faults on the Maximum Credible Ground-Motion Parameters of Large Earthquakes at a Near-Field Site

The ground-motion simulation of regional-specific earthquake scenarios is crucial for the seismic design of key facilities. Herein, we considered parameter uncertainty in ground-motion simulations and the impact of multiple faults when determining the maximum credible ground-motion parameters of large earthquakes at a near-field dam. The source models of the Daju–Lijiang, Xiaozhongdian–Daju, and Longpan–Qiaohou faults were established based on geological and geophysical data. Although the method for identifying asperity is not yet mature and still faces many difficulties, it provides an opportunity to identify the non-uniform slip distribution on the rupture plane by earthquake scenarios. A multi-scheme stochastic finite-fault simulation method was then used to estimate the minimum; mean; maximum; and 50th-, 84th-, and 95th-percentile values of the peak ground acceleration and pseudo-spectral acceleration response spectra. The results showed that the Longpan–Qiaohou fault can generate the largest ground-motion parameters compared with the other two faults. Moreover, this result was supported by the statistical analysis of the results of twelve thousand simulations of these three faults. Thus, it can be concluded that the maximum credible ground-motion parameters are represented by the 84th-percentile pseudo-spectral acceleration response spectrum of the Longpan–Qiaohou fault. This finding will benefit the seismic safety design of the target dam. More importantly, this multi-scheme method can be applied to other key facilities to obtain reasonable ground-motion parameters.

Image-based non-isotropic point light source calibration using digital fringe projection.

Accurate light source calibration is critical in numerous applications including physics-based computer vision and graphics. We propose an image-based method for calibrating non-isotropic point light sources, addressing challenges posed by their non-radially symmetric radiant intensity distribution and the non-Lambertian properties of the calibration target. We deduce an image formation model, and capture the intensity of the calibration target at multiple poses, coupled with accurate 3D geometry acquisition using the digital fringe projection technique. Finally, we design an iterative computational framework to optimize all the light source parameters simultaneously. The experiment demonstrated the high accuracy of the calibrated light source model and showcased its application by estimating the relative reflectance of diverse surfaces.

A Series Compensated Buck-Boost Converter-Based Thermoelectric Energy Harvesting System with Sliding Mode Controller

A thermoelectric generator (TEG) is a semiconductor-based device that can exhibit a flow of electric current through the external circuit if the sides of the TEG are subjected to a temperature difference caused by a heat source. The terminal voltage and the TEG’s internal resistance are altered depending on the temperature difference. Therefore, a suitable power electronic converter with a maximum power point tracking (MPPT) feature is required to harvest maximum power from the TEG and store the harvested energy in a battery-based energy storage system. This paper investigates a novel energy harvesting methodology from TEG using a series compensated buck-boost converter (SCBBC). MPPT has also been implemented using a sliding mode controller (SMC). A mathematical model of a TEG source has been developed in MATLAB-Simulink and tested with generic boost converter (GBC) and SCBBC for their dynamic performances during battery charging. The efficiency of conversion is found to be higher for SCBBC, at 97.87%. An experimental prototype has been developed with SCBBC and tested for two configurations, viz high voltage and low current configuration. The former configuration exhibits an efficiency of 86.3%, while the latter has an efficiency of 83%. The results indicate that SCBBC, along with SMC, opens up new efficient prospects for harvesting waste heat energy using TEGs.

Seismic hazard prediction of the Hunhe Fault in the Shen-Fu New District

Earthquake prevention and disaster mitigation are crucial aspects of social welfare that significantly impact national public security. This paper presents a seismic risk assessment and hazard prediction of the Hunhe Fault in the Shengyang-Fushun (Shen-Fu) New District. The target area is at risk of seismic damage due to two major branch ruptures, namely, F9 and F1; these ruptures have the potential to generate maximum earthquakes with a magnitude of 6.0 in the next 50 to 100 years. A three-dimensional underground velocity structure and asperity source model were established for the target faults. Subsequently, a hybrid technique combining deterministic and empirical approaches was employed to simulate the broadband strong ground motion of the target region in anticipation of the occurrence of expected scenario earthquakes. The distributions of peak ground acceleration (PGA), peak ground velocity (PGV) and peak ground displacement (PGD) for the area are provided, and the results indicate that densely populated urban areas could experience PGA values close to 280 cm/s2 along the fault traces. This study provides a reliable basis for engineering construction and urban planning in the Shen-Fu New District.

A novel hydrodynamic-water quality coupling model for high-efficiency and high-resolution simulations of urban NSPs

Nonpoint source pollution (NSP) is one of the main factors leading to black odor in urban rivers. A better understanding and simulation of the formation and transport mechanism of NSP is critical to the development of effective urban rainwater management and pollution control strategies. This work presents a novel hydrodynamic-water quality coupling model to quantitatively simulate the entire physical process of the urban NSP by integrating two-dimensional (2D) NSP build-up, wash-off and transport modules into the source code of the GPU-accelerated surface water and transport (GAST) model. The advantages of this model are that high-resolution terrain is considered, such as key microtopography, such as roads and houses, which will have a diversion effect on the transport of hydrodynamic water quality and affect, and detailed hydrodynamic processes based on physical processes are fully considered. Additionally, a graphical processing unit (GPU)-based acceleration method is introduced to increase the parallel performance of the computing process. Three scales of cases were used to verify the model. First, indoor experimental data from the model roof and measured data from the campus roof under two short-duration rainstorms were used for nonpoint source model verification. The Nash-Sutcliffe efficiency (NSE), root mean square error (RMSE), Bayesian information criterion (BIC) and Akaike information criterion (AIC) were utilized to assess the applicability of the different NSP wash-off equations added to this model. Based on this model, the NSP mechanism processes of residential buildings were examined. The results indicate that this model is suitable for various pollutant wash-off formulas and is capable of high-efficiency and robust predictions of the sources, transmission paths, and spatiotemporal distribution characteristics of urban nonpoint sources. We quantitatively simulated the generation and transport of NSP from a single roof and proposed an NSP traceability method based on detailed hydrodynamic processes. This model can provide strong technical support for the precise treatment of urban NSP and the construction of sponge facilities.

Prediction of Regional Broadband Strong Ground Motions Using a Teleseismic Source Model of the 18 April 2014 Mw 7.3 Papanoa, Mexico, Earthquake

ABSTRACT To estimate predicted ground motion from a teleseismic slip model, we use a low- and high-frequency hybrid method to simulate the regional, strong ground motions observed following the 18 April 2014 moment magnitude (Mw) 7.3 Papanoa, Mexico, earthquake. To generate the regional ground motion at low frequencies (<1 Hz), a teleseismically derived, finite-fault, kinematic model is used to define the earthquake source, taking into account slip-model variations identified with a parameter sampling approach that considers possible errors in the fault geometry, the hypocenter depth, and the rupture velocity. A 3D crustal model is used to calculate the low-frequency ground motions using a finite-element calculation that includes topography and considers variations in the source model to estimate the uncertainty in the calculations. High frequencies (>1 Hz) are added using a 1D full-wave propagation code that estimates uncertainties by considering multiple random distributions of slip with different spatial correlation lengths. The synthetic, broadband (0.05–10.0 Hz) ground motions are obtained by combining the low- and high-frequency portions match filtered at 1 Hz. These synthetic ground motions are compared with the regional observations using velocity records, peak ground acceleration, and medians of the orientation-independent response spectra of the horizontal components (RotD50) calculated at periods of 0.2, 0.3, 0.5, 1.0, 2.0, 3.0, 5.0, 7.5, and 10.0 s. The results indicate that ground motions estimated at these periods using our hybrid approach based primarily on a teleseismically derived source model are comparable to the values observed for the 2014 Papanoa earthquake at regional distances. The approach could be used to estimate strong-motion spectral levels expected for regions with limited local and regional recordings and could also fill in magnitude or distance gaps in ground-motion prediction relations utilized in the assessment of seismic hazard.

A Gaussian Process-Based extended Goldak heat source model for finite element simulation of laser powder bed fusion additive manufacturing process

Laser powder bed fusion (L-PBF) additive manufacturing (AM) is a key enabling technology to manufacture highly complex and integrated metallic structures. In L-PBF AM process, the melting of the metal powders and the layers underneath can be governed by either “conduction mode” or “keyhole mode”, with the keyhole mode reportedly leading to porosity and decreased strength and ductility by many studies. In part scale simulations, finite element (FE) model is often used to study the temperature distribution during printing and to predict the residual stress, where a volumetric heat flux with a Gaussian or a double ellipsoidal (Goldak) distribution is often applied as the laser heat source. However, the above heat source models can only capture the melt pool shape in the conduction mode, and fail to capture the transition to keyhole melting mode when the process parameters change. To overcome this inaccuracy, an extended Goldak heat source model is proposed by introducing a laser penetration term as a function of laser parameters obtained from a Gaussian-Process (GP) model. The model is validated by “2D pad” AlSi10Mg L-PBF experiments under a wide range of laser power, scan speed, and laser focus offset, and the results show the model successfully captures the measured melt pool shape in all conditions.

Design dependence of noise in Nb-based dc SQUIDs

Noise in superconducting quantum interference devices (dc SQUIDs) with different design, based on Nb/AlOx/Nb technology, has been systematically measured at temperature T = 4.2 K. We demonstrate that for all our devices the power spectral density of the white noise (above a frequency of about 1 kHz) is determined by the shunt resistors, reaching about 5 times Planck’s constant. The low-frequency noise level was measured for washer- and multi-loop-type SQUIDs with systematically varied effective area, SQUID loop perimeter, and inductance. We show that at 1 Hz the noise spectral density is approximately 40 times higher than the white noise level and its scaling with washer width and effective area is negligible. These results are incompatible with several models of the flicker noise source. Possible origins of this noise are discussed.

Direct Estimation of the Source Corner Frequency of Minor to Moderate Earthquakes from Fourier Phase Spectra Fitting

ABSTRACT Estimating the corner frequency (fc) of an earthquake is of fundamental importance to improving our knowledge of the physics of the rupture that gives rise to a seismic event, while also having important implications by providing information on the high-frequency radiation for seismic hazard studies. However, the estimation of fc through spectral-fitting methods suffers from trade-offs with the estimation of seismic wave attenuation, making the obtained values precise but not necessarily accurate. For this reason, after a review of the source model proposed by Brune (1970), a new method of estimating fc, based on the phase fitting of Fourier spectra of the Brune’s seismic pulse related to S-waves, called Fourier phase spectra fitting (FPS), is proposed and evaluated in this study. The method can be applied in cases in which Brune’s model may be appropriate, while also considering the effects of propagation on impulse deformation, for which the synthetic tests have been conducted. The results, obtained first using synthetic seismograms generated under controlled conditions and then on a data set of recordings of real seismic events collected at the Groningen gas field in the Netherlands, showed the method to be promising (being accurate and precise) and at the same time pointed out its limitations, with its applicability being restricted to short hypocentral distances of <20 km.