Solid-state Hydrogen Storage Research Articles

Characteristics of constant pressure dehydrogenation and construction of linear diffusion model for solid hydrogen storage materials: A case study of TiMn1.5 alloy

Solid-state hydrogen storage is considered to be the most promising hydrogen storage technology because of its high volumetric capacity and good security. The process of hydrogenation and dehydrogenation of solid hydrogen storage materials can be characterized by a diffusion kinetic model, which can be used to guide the safe and efficient application of hydrogen storage materials. Currently, experimental study on the dehydrogenation characteristics under constant pressure outer boundary condition has not been carried out methodically, and a simple and reliable diffusion kinetic model under this condition should be established based on the experimental results. In this study, an experimental platform for hydrogen absorption and constant pressure dehydrogenation of solid hydrogen storage materials was independently established. The TiMn1.5 alloy and its interstitial hydrides were taken as the experimental research objects to conduct constant pressure dehydrogenation tests, and the dehydrogenation properties at different temperatures were systematically studied. The results show that the dehydrogenation rate decreases with the increase of testing time. The ultimate capacity of hydrogen release increases first and then decreases with the increasing temperature, reaching the maximum value at 30 °C. It is found that the diffusion coefficient increases linearly with time during constant pressure dehydrogenation process. On this basis, a linear diffusion kinetic model is established. The initial diffusion coefficient D0 calculated by the new model has a quadratic polynomial relationship with temperature, and the increase coefficient α of diffusion coefficient has a linear relationship with temperature. According to the mathematical expressions, the dehydrogenation process of TiMn1.5 alloy at different temperatures can be predicted. The research results can provide theoretical guidance for the safe, efficient and controllable application of hydrogen storage materials.

Multiscale modeling of metal-hydride interphases—quantification of decoupled chemo-mechanical energies

The quantification of interphase properties between metals and their corresponding hydrides is crucial for modeling the thermodynamics and kinetics of the hydrogenation processes in solid-state hydrogen storage materials. In particular, interphase boundary energies assume a pivotal role in determining the kinetics of nucleation, growth, and coarsening of hydrides, alongside accompanying morphological evolution during hydrogenation. The total interphase energy arises from both chemical bonding and mechanical strains in these solid-state systems. Since these contributions are usually coupled, it is challenging to distinguish via conventional computational approaches. Here, a comprehensive atomistic modeling methodology is developed to decouple chemical and mechanical energy contributions using first-principles calculations, of which feasibility is demonstrated by quantifying chemical and elastic strain energies of key interfaces within the FeTi metal-hydride system. Derived materials parameters are then employed for mesoscopic micromechanical analysis, predicting crystallographic orientations in line with experimental observations. The multiscale approach outlined verifies the importance of the chemo-mechanical interplay in the morphological evolution of growing hydride phases, and can be generalized to investigate other systems. In addition, it can streamline the design of atomistic models for the quantitative evaluation of interphase properties between dissimilar phases and allow for efficient predictions of their preferred phase boundary orientations.

Decoding Hydrogen Desorption Kinetics in Porous Silicon: An Electrical Circuit Modeling Approach.

Solid-state hydrogen storage outperforms conventional storage methods in terms of safety and on-board applications. Porous Si (PS) is the optimized Si nanostructure with ample surface area (∼400 m2 g-1) and maximum dangling sites for hydrogenation. Though solid-state hydrogen storage in Si nanostructures, especially in porous Si, is extensively studied, the thermal desorption of hydrogen is rarely reported. This work investigates and analyzes the thermal desorption of a hydrogen-terminated PS surface using attenuated total reflectance-Fourier transform infrared spectroscopy (ATR-FTIR) to optimize the temperature for efficient desorption, as FTIR is sensitive to identifying the presence of Si hydride species (SiHx). The relative peak intensities in the spectra estimate the relative hydrogen retention (γ) for the analysis of the desorption kinetics. The desorption curves are divided into two zones on the time scale: the excitation zone and the recombination zone, separated by the recombination threshold point. The initially absorbed energy breaks the Si-Hx bonds in the excitation zone to reach the recombination threshold for H2 formation. The recombination zone is further divided into two subzones: the avalanche subzone (a sudden decrease in γ indicating molecular desorption) and the saturation subzone (almost constant γ with minimal desorption). The time constant from the first-order reaction kinetic fitting of the desorption curves explores the time-temperature correlation and the barrier energy estimation for the excitation and recombination zones. The analysis identifies the critical operating point for desorption as 100 °C and 4 min, with the optimized temperature of 250 °C. This article applies an analogous electrical circuit to compare the thermal hydrogen desorption and capacitor discharge circuit for analytical convenience.

Hydrogen Storage Materials: Promising Materials for Kazakhstan’s Hydrogen Storage Industry

Hydrogen, widely recognized as an efficient and clean energy carrier, holds significant promise for transforming future energy systems. Despite advances in hydrogen production and cost reduction, challenges in hydrogen storage continue to impede its widespread adoption. Traditional storage methods, such as high-pressure tanks and liquid hydrogen, have limitations related to high energy and resource costs. Solid-state materials offer a safer and more reliable alternative for hydrogen storage under various operating conditions. This review article provides an in-depth analysis of hydrogen storage materials, focusing on metal hydrides, complex hydrides, and carbon-based materials, with particular attention to their thermodynamic, structural, and kinetic properties. Additionally, the article explores the potential application of certain materials in Kazakhstan's hydrogen market, highlighting the country's rich mineral resources and existing industrial infrastructure. By leveraging these resources, Kazakhstan can play a crucial role in advancing hydrogen storage technologies and contributing to global decarbonization efforts. The review aims to offer comprehensive insights into the current state and prospects of solid-state hydrogen storage materials, emphasizing their relevance and potential impact on Kazakhstan's energy sector.

Enhancing hydrogen storage efficiency: Computational insights into scandium-decorated 2D polyaramid

This study explores hydrogen storage in 2D polyaramid (2DPA) and its enhancement via scandium decoration for onboard storage in fuel cell vehicles. Sc decoration in 2DPA is accompanied by a net 1.6 e charge transfer from Sc to 2DPA. Hydrogen binding in 2DPA + Sc proceeds with a net charge transfer of 0.32 e from Sc towards H2. 2DPA + Sc demonstrates a maximum hydrogen loading capacity of 8.589 wt% with an average adsorption energy of −0.376 eV/H2. These findings meet the stipulated criteria by the US Department of Energy for solid-state hydrogen storage in light-duty vehicles. Feasibility studies were conducted considering practical limitations in transition metal-modified carbon nanomaterials, including Sc-Sc clustering tendencies, stability, and hydrogen desorption behavior via ab initio molecular dynamics simulations, phonon dispersion, and diffusion studies. The highest barrier height for hydrogen desorption from 2DPA + Sc is 0.48 eV, and desorption is predicted to occur at 412 K (5 bar) indicating possibility of room temperature and reversible hydrogen storage. Our findings indicate that 2DPA + Sc is a promising hydrogen storage substrate material and should be explored in experimental trials.

Enhancing the dehydrogenation properties of LiAlH4 through the addition of ZrF4 for solid-state hydrogen storage

Hydrogen energy is emerging as an essential alternative to fossil fuels due to its clean energy profile, generating energy without greenhouse gas emissions. Solid-state hydrogen storage, particularly using complex hydrides like LiAlH4, holds promise due to high hydrogen capacities. However, practical applications of LiAlH4 face obstacles due to slow dehydrogenation kinetics and high decomposition temperatures. This study investigates the catalytic effect of ZrF4 on LiAlH4 to improve hydrogen storage properties. Incorporating 10wt.% ZrF4 has significantly lowered the onset desorption temperature from 160 °C to 80 °C. Desoption kinetic result showed that the addition of 10wt.% ZrF4 can enables the release of 5.6wt.% hydrogen in 120min at 100 °C, which is 50 times faster than in undoped samples. X-ray diffraction analysis indicated that ZrF4 facilitated the in-situ formation of Al3Zr and LiF phases during dehydrogenation, thereby enhancing catalytic efficiency. The desorption activation energies for first two reactions decreased significantly by ~ 16kJ/mol and ~24kJ/mol with ZrF4 doping. These findings suggest that ZrF4 effectively improves the hydrogen storage properties of LiAlH4, positioning it as a potential catalyst for solid-state hydrogen storage systems.

The structural, elastic, optoelectronic properties and hydrogen storage capability of lead-free hydrides XZrH3 (X: Mg/Ca/Sr/Ba) for hydrogen storage application: A DFT study

Perovskite hydrides are promising materials for hydrogen capacity application to achieve the US DOE on-board criteria. We have investigated novel perovskite hydrides XZrH3 (X: Mg/Ca/Sr/Ba) for H2 storage and transportation applications. In this study we investigates the physical properties of XZrH3 light materials for solid-state hydrogen storage application by incorporating the DFT framework with the CASTEP code. We have theoretically examined the structural, mechanical, electronic, optical, and hydrogen storage properties of these materials. The selected compounds were fully relaxed and optimized in the cubic phase space group Pm-3 m. Structural phase stability was confirmed through thermodynamic, and mechanical analyses. Mechanical properties, evaluated based on Poisson’s ratio, the Puagh’s ratio, and Cauchy pressure, indicate the ductile behavior with a preference for ionic bonding. The electronic structure analysis reveals the metallic behavior of these materials. Optical calculations were also performed to provide additional insights into the physical properties of H2 compounds. The gravimetric hydrogen storage capacities were calculated as 2.55, 2.25, 1.66, and 1.31 wt% for MgZrH3, CaZrH3, SrZrH3, And BaZrH3 hydrides respectively. The identified properties of XZrH3 suggest that these materials could significantly enhance hydrogen storage systems, with potential integration into existing energy technologies, offering a pathway toward more efficient and sustainable hydrogen-based solutions.

Research on the modification of magnesium hydride by two-dimensional layered Mo2Ti2C3 MXene

One of the most important technologies for the sustainable development of energy in the future is solid-state hydrogen storage. This study employed etching methods to fabricate two-dimensional layered catalyst Mo2Ti2C3 MXene, which was compared with unetched MAX phases Mo2Ti2AlC3 and Ti3C2, as well as Mo2C. Through mechanical ball milling, these materials were mixed with MgH2 to prepare composite materials, including MgH2 + Ti2C3, MgH2 + Mo2C, MgH2 + Mo2Ti2AlC3, and MgH2 + Mo2Ti2C3. According to the study, Mo2Ti2C3 demonstrates the synergistic catalytic actions of Ti and Mo in contrast to Ti2C3 and Mo2C. The composite material MgH2 + Mo2Ti2C3 lowers the initial dehydrogenation temperature of MgH2 to 180 °C, which is 165 °C lower than pure MgH2. After 30 min at 250 °C, the dehydrogenation amount is approximately 5.85 wt%. Hydrogen absorption begins at 40 °C and reaches approximately 5.75 wt% at 150 °C. Additionally, it maintains a reversible hydrogen storage capacity of up to 96 % even after 20th cycles at 300 °C. This is because Mo2Ti2C3 has one less layer of Al than Mo2Ti2AlC3, which results in a wider interlayer spacing, more active sites for MgH2, and facilitates hydrogen molecule dissociation and recombination.

Optimized Dehydrogenation of Magnesium Hydride with Fe and Cu Additives

Solid state hydrogen storage with the use of MgH2 has gained widespread attention because of its good reversible storage capacity. This metal hydride however slowly releases hydrogen at high temperatures ranging between 325 – 375 oC. An important feature required of MgH2 is its ability to commence hydrogen release at a fast rate and reduced temperature. Transition metal-containing alloys/compounds having either Fe or Cu as the principal element have been used to improve the dissociation of hydrogen from MgH2. Studies involving the use of each metal in its elemental form as an additive are minimal. This study investigated the catalytic effects of elemental Fe and Cu on the hydrogen release performance of MgH2 for potential applications in transportation and power generation. It was observed that MgH2/Fe had a better dehydrogenation performance; the temperature of onset of MgH2/Fe and MgH2/Cu dehydrogenation were 205, and 215 oC which were 98 and 88 oC lower than that for as-received MgH2. The highest amount, 1.9 wt. % H2 was released by MgH2/Fe while 1.44 wt. % H2 was released by MgH2/Cu. The activation energy for dehydrogenation was reduced from 150.5 kJ/mol for as-received MgH2 to 89.8 and 79.8 kJ/mol in MgH2/Cu and MgH2/Fe respectively. It took 18.8 min for as-received MgH2 to commence dehydrogenation while that for MgH2/Fe and MgH2/Cu composites started from 12.2 and 13.4 min respectively. The in-situ formed Fe and Cu in MgH2 after milling acted as active catalytic sites for its improved dehydrogenation with MgH2/Fe behaving better.

In-situ formation of V and Mg2Co/Mg2CoH5 for boosting the hydrogen storage properties of MgH2

Among the potential candidates for solid-state hydrogen storage, magnesium hydride (MgH2) exhibits high storage capacity of 7.6 wt%. However, its commercial application is hindered by the unsatisfactory kinetics properties and stable thermodynamics. In this study, we synthesized porous spherical CoV₂O₆ and incorporated it into MgH2, reducing the initial dehydrogenation temperature of MgH2 to 190 °C. Additionally, rapid hydrogen uptake was also observed, approaching 6.5 wt% H2 within 1000 s at 190 °C. A notable decrease of 45.78 kJ/mol in the apparent activation energy (Ea) for dehydrogenation signifies an improved dehydrogenation kinetic. The formation of Mg2Co/Mg2CoH5, along with the presence of single-valence and multi-valence vanadium, facilitated multiple electron transfer pathways. In particular, vanadium elongated the Mg–H bond is responsible for the high catalytic activity in boosting the hydrogen storage performance of MgH2. These findings provide new intuitions for further research to enhance the kinetic properties of hydrogen adsorption and desorption in magnesium hydride.

Performance improvement of a U-tube heat exchanger based hydrogen storage reactor by phase change materials

Solid-state hydrogen storage technology using metal hydrides as carriers has great application prospects. This study aims to optimize the heat transfer resistance and absorption kinetics issues encountered in practical applications of LaNi5-H2 storage materials in storage reactors. A mathematical model for the hydrogen absorption process in the reactors based on U-tube and straight-tube heat exchangers was built, and the advantages of U-tube structure and the flow characteristics of the heat transfer fluid on its heat transfer and absorption performance were analyzed. To further enhance the U-tube based reactor's performance, phase change materials (PCM) were subsequently introduced as an auxiliary heat transfer medium, while the amount of PCM and the thermal conductivity of the reaction bed were optimized. The results showed that the appropriate PCM dosage could overcome the inherent defects of the U-tube heat exchanger and significantly improve heat dissipation and reaction rates of the reactor, and the H2 absorption completion time was shortened by 1.4 times. In addition, the increased thermal conductivity of reaction beds is equally important for the enhancement of heat transfer and absorption rate. Nevertheless, further increase of PCM's thermal conductivity has a limited effect on the improvement of the performance.

WO2–N co-doped 2D Carbon nanosheets as multifunctional additives for enhancing the electrochemical hydrogen storage performance of Co2B

Co2B, with its high theoretical hydrogen storage capacity, is a potential solid-state hydrogen storage material. However, its poor cycling life limits its practical application. In this work, in order to improve the cycling stability and reversibility of hydrogen absorption and desorption of Co2B, we propose to use WO2–N–C nanosheets as dopants to mix with Co2B, thereby enhancing its practical performance. Two-dimensional tungsten oxide-nitrogen-carbon (WO2–N–C) nanosheets was syntheized via a liquid-phase approach, using a tungstenate-polydopamine precursor followed by thermal treatment. Subsequently, these WO2–N–C nanosheets were compounded with cobalt boride (Co2B) particles through ball milling at various ratios of 1%, 3%, and 5%, which were confirmed by XRD (X-ray diffraction) and SEM (Scanning Electron Microscope) methods. Employing a comprehensive suite of electrochemical analyses, including corrosion potential measurements, polarization curves, step voltammetry, and electrochemical impedance spectroscopy (EIS), we found that the incorporation of WO2–N–C significantly enhances the corrosion resistance and electrochemical activity of Co2B. Furthermore, cyclic life tests revealed that the WO2–N–C-doped Co2B composites exhibit superior discharge capacities and capacity retention rates compared to pristine Co2B. Notably, the 3% WO2–N–C-doped Co2B composite demonstrated the optimal electrochemical performance, achieving a maximum discharge specific capacity of 555 mAh g−1 and maintaining 82% of its initial capacity after 50 cycles. Our findings underscore the dual role of WO2–N–C in not only augmenting the surface electrochemical activity of Co2B but also providing a protective surface layer, thereby enhancing its overall electrochemical performance.

A precise prediction of structure stability and hydrogen storage capability of KCdH3 perovskite hydride using density functional theory calculations

Perovskite hydrides materials are acknowledged for hydrogen storage due to their high capacity, reversibility, thermodynamic stability, tunable nature, and potential low-cost solutions. In the current investigation, the four distinct cubic structures of perovskite hydride KCdH3 for the hydrogen storage are investigated with the help of density functional theory and providing valuable insights into stable phases. Electronic, thermal and entropy calculations are performed. Two out of four cubic structure are founded mechanically stable with the gravimetric storage capacity of be 5.5 cwt% and the volumetric storage capacity of 67.69 gH2l−1 which align with the standard situated by the U.S. Department of Energy for the year 2025. Notably, this study is the first comprehensive investigation of all four cubic phases of the KCdH3 compound. The promising hydrogen storage capabilities of these compounds shows the credibility for their effective use as a solid-state hydrogen storage material, and the research aims to further ascertain its stability and storage capacities.

Enhance hydrogen storage in lightweight solid-state systems based on Poly(vinylnaphthalene)

This article highlights the potential of poly(2-vinylnaphthalene) (PVN) as a novel light-weight solid-state hydrogen storage system for various applications. With an impressive theoretical gravimetric hydrogen capacity of 5.2 wt.-%, PVN stands out for its attractiveness as a hydrogen carrier. The material possesses advantageous characteristics, including moldability, low toxicity, and ease of storage, making it a promising candidate for both stationary and mobile hydrogen storage applications. Experimental findings demonstrate that PVN can be hydrogenated by up to 76 % utilizing an Ru/Al2O3 catalyst at 250 °C for 24 h. Confirmation of the hydrogenation reaction, which results in poly(2-vinyldecalin), was achieved through characterization techniques such as FTIR, 1H NMR, and spectroscopic ellipsometry. The study of the effects of hydrogen pressure and reaction time identified moderate conditions as favorable, though a further exploration of different catalysts is suggested for optimal conversion. A palladium-based catalyst was employed to release hydrogen from the hydrogenated polymer, demonstrating almost complete reversibility of the hydrogenation of poly(2-vinylnaphthalene) with a dehydrogenation yield of 90 %.

Introducing Noble Gas as Space Holder under High Pressure to Design Porous Titanium Carbides with Open Metal Sites for Hydrogen Storage at Near-Ambient Conditions.

It has been a long-standing challenge to develop high-performance solid-state hydrogen storage materials operated under near-ambient conditions. In this work, we propose a new strategy of using noble gases for space holding to design porous titanium carbides with abundant open metal sites for hydrogen storage. By using machine learning and graph theory-assisted universal structure searching methods, we obtain 28 porous titanium carbides from three precursors (TiC dimer, C atom, and Kr atom) under 30 GPa of pressure. The stability and hydrogen storage performance of the resulting structures are further assessed and validated through density function theory and grand canonical Monte Carlo simulations with a DFT-fitted force field. Finally, p-TiC2 is identified as a promising quasi-molecular hydrogen storage material with capacity of 4.0 wt % and 106.0 g/L at 230 K and 16 bar.

Numerical study on hydrogen desorption performance of a new MgH2 solid-state hydrogen storage device

To explore the factors affecting the hydrogen evolution performance of a new MgH2 solid-state hydrogen storage heat exchanger, this paper designs the MgH2 solid-state hydrogen storage device. The study numerically investigates the influence of operating parameters and structural parameters on the hydrogen release reaction. The results demonstrate that the hydrogen desorption rate increases as the pressure decreases from 0.3 MPa to 0.1 MPa. Moreover, the hydrogen evolution reaction rate significantly rises with an increase in the inlet temperature of the heat transfer fluid (HTF) from 600 K to 700 K. Similarly, the rate of hydrogen evolution reaction increases with an increase in the flow rate of the HTF from 0.5 m/s to 1.25 m/s. The hydrogen evolution reaction time can be notably reduced by increasing the thickness of the annular HTF layer. Compared to no annular fluid layer, the completion time of the hydrogen desorption reaction is shortened by 558 s with a 5 mm thickness. The arrangement of heat exchanger pipes plays a crucial role in the hydrogen evolution reaction, and thus a comprehensive index M is defined to evaluate its influence. A higher M value indicates slower hydrogen release efficiency of the device. By optimizing the operating conditions, the hydrogen desorption time can be shortened by 93.4 %.

Size-dependent activity modulation of supported Ni nanocatalysts for efficient solid-state hydrogen storage in magnesium

The activity of Nickel (Ni)-based catalysts strongly depends on their particle size and dispersion; however, achieving controllable preparation of uniform particle size with high activity remains a great challenge for Ni-based catalysts to promote efficient hydrogen storage. Here, we employ a facile Carbothermal Shock (CTS) method to obtain carbon fiber-loaded Ni-based nanocatalysts (Ni@CC) with high dispersibility and size-dependent properties, which can exhibit superior catalytic effects for solid-state hydrogen storage in MgH2. It was found that the shorter the CTS duration, the smaller the size of the Ni nanoparticles, and the better the catalytic effect. Among these, the MgH2-Ni@CC with a CTS duration of 30 s showed the best hydrogen storage performance. Its activation energy for hydrogen release was significantly decreased from 158.3 kJ⋅mol−1 for milled MgH2 to 98.6 kJ⋅mol−1. More importantly, the retention rate of hydrogen absorption capacity is 95.1 % after 30 cycles, which far exceeds the 65.5 % retention rate observed in milled MgH2. These property enhancements can be attributed to the presence of nano-sized Ni and its in situ derived Mg2Ni intermediate phases, which create more channels for hydrogen atoms diffusion. Meanwhile, the close contact between nano-Ni and the Mg/MgH2 matrix can provide active catalytic sites and low-energy interfaces for facilitating hydrogen adsorption and desorption. Our study presents a promising approach to significantly improve the hydrogen storage performance of MgH2 by modulating size-dependent catalytic activity.

High-capacity hydrogen storage in Li-decorated newly synthesized 2D polyaramid: Insights from density functional theory

Using Density Functional Theory, a newly synthesised 2-dimensional polyaramid (2dpa) system decorated with Li is explored for its hydrogen storage capability, and interesting results are obtained. Various sites on 2dpa are studied to ascertain the finest location for Li-decoration. The optimum configuration for hydrogen storage is then achieved by successively adding H2 molecules, till it satisfies the adsorption energy window as prescribed by DoE (0.2–0.7 eV/H2). Li has a good binding energy of −2.78 eV on 2dpa, higher than the cohesive energy for Li and thus prevents any possibilities of clustering. Yet the clustering has been checked by calculating the diffusion energy barrier for the Li atom which came to be around 1.92 eV. The average binding energy for H2 on 2dpa + Li came to be −0.25 eV and the gravimetric weight percent with 3Li on 2dpa and 6H2 molecules attached to each Li comes to be 10.62. Both values meet the conditions set by the US DoE for solid-state hydrogen storage systems. The thermal and dynamic stability of the system has been investigated using Ab initio Molecular Dynamics simulations and computing phonon spectra. Our theoretical results on newly synthesized 2D material may inspire the experimentalist to design a 2dpa-based high-capacity hydrogen storage device.

A parametric study on hydrogen storage in AB5 hydride alloys: Heat and mass transfer, thermodynamics, and design

The design of heat exchangers plays an important role in the performance of solid-state hydrogen storage devices. In this study, three different designs of hydrogen storage devices were investigated, incorporating phase change material (PCM), specifically, RT25HC into their walls in various shapes. A mathematical model, validated using previous experimental data, was employed to calculate heat and mass transfer and determine the reaction time period. The calculations were conducted using ANSYS Fluent, with a constant hydrogen supply pressure of 10 bars and a temperature of 295 K. The absorption properties of the storage reactor were investigated through various parameters such as liquid fraction, hydrogen concentration, and natural convection heat transfer coefficients. Results showed that the geometric structure and PCM distribution significantly impacted the performance of the hydrogen storage devices. Design 1, with a centralized PCM distribution, demonstrated moderate heat transfer rates and a longer reaction time. Design 2, featuring a more distributed PCM layout, improved heat transfer rates and reduced hydrogen kinetics time by 40%. Design 3, which optimized the geometric structure with advanced PCM shapes, achieved the highest heat transfer rates and improved hydrogen kinetics time by 50%. This design also enabled the storage of thermal energy at a high density, ranging from 10.2 J/g to approximately 190.5 J/g. The study provides critical information on the design of efficient solid hydrogen storage processes. The findings suggest significant potential for improved performance in industrial applications such as electric vehicles and domestic energy supply. The high efficiency of the large-scale reactor is due to its well-designed system, which effectively converts chemical energy into thermal energy. Optimizing the reactor geometry and PCM distribution is crucial for achieving superior hydrogen storage and retrieval performance.

Graphene-loaded nickel−vanadium bimetal oxides as hydrogen pumps to boost solid-state hydrogen storage kinetic performance of magnesium hydride

To modify the thermodynamics and kinetic performance of magnesium hydride (MgH2) for solid-state hydrogen storage, Ni3V2O8-rGO (rGO represents reduced graphene oxide) and Ni3V2O8 nanocomposites were prepared by hydrothermal and subsequent heat treatment. The beginning hydrogen desorption temperature of 7 wt.% Ni3V2O8-rGO modified MgH2 was reduced to 208 °C, while the additive-free MgH2 and 7 wt.% Ni3V2O8 doped MgH2 appeared to discharge hydrogen at 340 and 226 °C, respectively. A charging capacity of about 4.7 wt.% H2 for MgH2 + 7 wt.% Ni3V2O8-rGO was achieved at 125 °C in 10 min, while the dehydrogenated MgH2 took 60 min to absorb only 4.6 wt.% H2 at 215 °C. The microstructure analysis confirmed that the in-situ generated Mg2Ni/Mg2NiH4 and metallic V contributed significantly to the enhanced performance of MgH2. In addition, the presence of rGO in the MgH2 + 7 wt.% Ni3V2O8-rGO composite reduced particle aggregation tendency of Mg/MgH2, leading to improving the cyclic stability of MgH2 during 20 cycles.