Solid Particles Research Articles

Cinnamon Particle‐Stabilized Gas Marbles: A Novel Approach for Enhanced Stability and Versatile Applications

AbstractSuspension of solid particles at interfaces is a common phenomenon, pivotal in natural, and industrial contexts. This study focuses on gas marbles which are single soap‐like air bubbles in air environment stabilized by colloidal particles. A unique stabilization method employing edible cinnamon particles is introduced. Unlike previous studies using spherical particles, the irregularly‐shaped micrometer‐sized cinnamon particles demonstrate remarkable long‐term stability through jamming and interlocking at the air‐liquid interface. Comprehensive characterization via optical and scanning electron microscopy, and contact angle experiments, elucidates the stabilization mechanism. These gas marbles exhibit exceptional resilience against drying, heating, freezing, and mechanical stress. They can be fabricated with various edible liquids offering extensive customization possibilities. This breakthrough introduces a promising method for creating stable gas marbles with edible particles, offering versatility for various fields and applications. The application scope includes surface catalysis and shock/vibration sensors, and also molecular gastronomy.

A Small Electrolyte Drop Enables a Disruptive Semisolid High‐Energy Sulfur Battery Cell Design via an Argyrodite‐Based Sulfur Cathode in Combination with a Metallic Lithium Anode

AbstractLithium–sulfur batteries with liquid electrolytes are discussed as the most promising post‐lithium‐ion‐battery technology in literature due to their high theoretical specific energy and first prototype cells delivering >470 Wh kg−1. Although several electrolyte and material concepts are developed that partially solve the issue of the so‐called shuttle mechanism, the most promising concept to genuinely confine sulfur species in the cathode is all‐solid‐state argyrodite–sulfur cathodes leading to almost theoretical active material utilization by maintaining reasonable sulfur loadings and electrolyte to sulfur ratios. However, this battery concept has so far not achieved reversible cycling against metallic lithium anodes as it requires high pressures for manufacturing, and ductile lithium metal creeps along the grain boundaries of the solid electrolyte particles leading to short cuts of the cells. Recent findings show that metallic lithium, however, can be stably cycled with dimethoxyethane/lithium‐bis(fluorosulfonyl)imide (DME/LiFSI)‐based electrolytes. Herein, for the first time, a semisolid concept is presented combining the benefits of an argyrodite‐based solid‐state cathode and a DME/LiFSI/hydrofluoroether‐based anolyte concept – in coin cells and first pouch cells. This disruptive approach enables projected specific energies higher than 600 Wh kg−1 at cell stack level.

Solutions to a two-phase mass flow model with generalized drag

Drag plays a dominant role in the interfacial momentum exchange in mixture mass flows. In this study, we examine a general two-phase mass flow model formulated by Pudasaini [1], which incorporates drag. This model describes the mass flow comprising a mixture of solid particles and viscous fluid moving downhill under the influence of gravity. We construct explicit, analytical, and numerical solutions to the model using the Lie symmetry method. These new solutions disclose the role of generalized drag in the dynamics of both solid particles and viscous fluid. The solutions show that solid and fluid phases undergo nonlinear evolution in a coupled manner. Additionally, the solutions demonstrate that increased drag results in a tighter binding between solid and fluid components. We also analyze the role of pressure gradients. The solutions reveal that when solid pressure dominates fluid pressure, solid velocity increases faster than fluid velocity. These findings align with our expectations, emphasizing the importance of analytical solution techniques in understanding the complex process of mixture mass transport in mountain slopes and valleys, thereby enhancing our understanding.

Photophoresis of a moderately large high-viscosity droplet in slip mode

Purpose of research. To obtain analytical expressions that allow calculating the strength and velocity of a moderately large, highly viscous droplet, taking into account the direct contribution of the evaporation coefficient, linear corrections by the Knudsen number and the reactive effect of a plane wave moving in the field of mono-chromatic radiationMethods. Methods of perturbation theory, gas kinetic methods, mathematical methods for solving linear partial differential equations with variable coefficients (the system of Stokes equations, Laplace and Poisson equations) were used.Results. In a quasi-stationary approximation, a theoretical description of the photophoretic motion of a moderately large evaporating highly viscous spherical droplet (there is no circulation of matter inside the droplet and interfacial surface tension forces) in a viscous binary gas mixture is carried out. A velocity-linearized system of Navi-Stokes equations and heat and mass transfer was solved. Expressions are obtained for the fields of mass velocity, pressure, temperature and the relative numerical concentration of the first component. The strength and speed of photophoresis of a highly viscous droplet was determined by integrating a stress tensor over the surface of the particle. Under boundary conditions on the surface of a highly viscous droplet, linear corrections in terms of the Knudsen number (isothermal, thermal and diffusion slips, temperature and concentration jumps, as well as sliding due to temperature inhomogeneity along the curved surface of the particle), the reactive effect and the contribution of the direct influence of the evaporation coefficient were taken into account. The contributions to the obtained formulas for the photophoresis of a moderately large highly viscous droplet are analyzed and the preliminary transitions to the results known in the literature (moderately large and large solid particles of spherical shape) are considered Conclusion. The obtained formulas based on the hydrodynamic method allow us to evaluate the effect of the direct contribution of the evaporation coefficient and linear corrections by the Knudsen number on the strength and speed of photophoresis of a moderately large evaporating highly viscous droplet in a binary gas mixture.

Hydrodynamic Impact of Dusty Fluid-Suspended Solid Particles in a Single-Walled Corrugated Channel for Water-Curing Infrastructure Networks

Infrastructure engineering is impacted by solid particles in fluids, and engineering components are influenced by fluid flow methods. This work explores the effects of dusty fluids with suspended solid particles in a single-walled corrugated channel using electromagnetic hydrodynamics. Potential, continuity, and momentum equations were employed to study the periodic sinusoidal waves in the corrugations of two wavy walls using the perturbation method. We assessed the impact of corrugation on velocity for EMHD fluid flow using mathematical computation, concentrating on the analytical velocity solutions. The analysis of velocity profiles through graphs reveals that corrugation affects fluid and particle velocity behavior, with small amplitude reducing wave effects and dusty particles boosting velocity. The proposed model uses mathematical induction to solve engineering problems using corrugated wall conditions for fluid control during curing stages. It may be valuable for sanitation networks, rainwater drainage networks, and irrigation systems. In the end, a thorough examination of the obtained results and information from past papers demonstrated a high level of agreement. Additionally, its use in the curing of water will offer alternative methods of managing the flowing fluid than mechanical pressure.

Modeling the evaporation and drying of two-component slurry droplets

In this paper, we present a mathematical model and numerical simulation for the evaporation and drying of a liquid droplet containing suspended solids, relevant to processes such as spray drying and spray pyrolysis in the food and pharmaceutical industries. The model comprises three stages: first is the evaporation of the liquid droplet consisting of solid particles, followed by the second stage starting with the formation of a porous crust around a wet-core region and, finally, the third stage with sensible heating of the dry particle. Using a finite difference method with a moving grid, we account for the moving interface between the crust and wet core. Our model incorporates spatial temperature variations and is validated against experimental data on colloidal silica droplet drying, showing good agreement. We examine model assumptions and analyze the impact of drying conditions on drying rate and final particle morphology. Along with the temperature and velocity of the drying gas, we also find that the shape of suspended solid particles inside the droplet and assuming continuum flow of vapor through the crust influence drying quality. Finally, we develop a regime map to predict whether the final particle will be solid or hollow based on operating conditions.

Exploring the tendency of Brownian agglomeration in polydispersed systems of solid atmospheric aerosols

Recent extensive research has focused on atmospheric aerosol systems, driven by their far-reaching implications for climate and public health, with a goal to identify optimal air quality management practices. This study employs Langevin dynamics to investigate the impact of size distribution and concentration of submicrometer solid aerosol particles on Brownian agglomeration tendencies within an isothermal, hydrostatically balanced atmosphere. To accomplish this, a Langevin dynamic model is devised, and parameters are carefully determined to ensure numerical integration precision, stability, and efficiency. Using this model, we numerically simulate the average agglomeration nucleus and overall agglomeration rate within the system while considering variations in the standard deviation of size distribution and volume fraction of aerosol particles.

Effect of the composition of combined solid lipid particles with gefitinib and a photosensitizer on their size, stability and cytotoxic activity

The creation of combined nanomedicines and their controlled release under the influence of photoinduction is an actively developing branch of scientific research. This work is devoted to the development of models of solid lipid nanoparticles for a well-known antitumor drug – gefitinib in combination with a photoindicating agent – a photosensitizer from the phthalocyanine group. Nanoparticles were obtained by several methods: hot homogenization with stearic acid, sesame oil and Tween 80 and by one-step dispersion with copolymers of lactic and glycolic acids and polyvinyl alcohol. In vitro experiments when irradiating particles with a laser in the near-infrared range (about 730 nm) proved the advantage of using combined nanoparticles with gefitinib and a photosensitizer compared to monotherapy, while the activity in terms of IC50 was 5.1-8.7 times higher for gefitinib and 1.5-1.8 times for the photosensitizer.

Short-term microplastic effects on marine meiofauna abundance, diversity and community composition.

Due to the copious disposal of plastics, marine ecosystems receive a large part of this waste. Microplastics (MPs) are solid particles smaller than 5 millimeters in size. Among the plastic polymers, polystyrene (PS) is one of the most commonly used and discarded. Due to its density being greater than that of water, it accumulates in marine sediments, potentially affecting benthic communities. This study investigated the ingestion of MP and their effect on the meiofauna community of a sandy beach. Meiofauna are an important trophic link between the basal and higher trophic levels of sedimentary food webs and may therefore be substantially involved in trophic transfer of MP and their associated compounds. We incubated microcosms without addition of MP (controls) and treatments contaminated with PS MP (1-µm) in marine sediments at three nominal concentrations (103, 105, 107particles/mL), for nine days, and sampled for meiofauna with collections every three days. At each sampling time, meiofauna were collected, quantified and identified to higher-taxon level, and ingestion of MP was quantified under an epifluorescence microscope. Except for Tardigrada, all meiofauna taxa (Nematoda, turbellarians, Copepoda, Nauplii, Acari and Gastrotricha) ingested MP. Absorption was strongly dose dependent, being highest at 107 particles/mL, very low at 105 particles/mL and non-demonstrable at 103 particles/mL. Nematodes accumulated MP mainly in the intestine; MP abundance in the intestine increased with increasing incubation time. The total meiofauna density and species richness were significantly lower at the lowest MP concentration, while at the highest concentration these parameters were very similar to the control. In contrast, Shannon-Wiener diversity and evenness were greater in treatments with low MP concentration. However, these results should be interpreted with caution because of the low meiofauna abundances at the lower two MP concentrations. At the highest MP concentration, abundance, taxonomic diversity and community structure of a beach meiofauna community were not significantly affected, suggesting that MP effects on meiofauna are at most subtle. However, lower MP concentrations did cause substantial declines in abundance and diversity, in line with previous studies at the population and community level. While we can only speculate on the underlying mechanism(s) of this counterintuitive response, results suggest that further research is needed to better understand MP effects on marine benthic communities.

Stability of plane parallel flow revisited for particle-fluid suspensions

Abstract An alternative model is proposed for hydrodynamic stability of plane parallel flow of an incompressible Newtonian fluids with suspended solid particles. For heavy particle-laden dusty gases with negligible particle volume fraction, the effective complex-form mean velocity in the modified Orr-Sommerfeld equation derived by the present model is showed to be essentially identical to the well-known Saffman's classical results. In the limit cases of small or large Stokes number of particles, simple formulas are derived for the effective Reynolds number ratio of the particle-laden suspension to the clear fluid without particles under otherwise identical conditions. The derived formula for particles of finite particle-to-fluid density ratio and small Stokes number is verified by comparing predicted results with known data, although a comparison of the derived formula with known results for particles of finite density ratio and large Stokes number cannot be made here due to the lack of available data. It is hoped that the present work could offer a conceptually novel and relatively simplified model for hydrodynamics of solid particle-fluid suspensions.

Passage and degradation kinetics of solid particles from agricultural residues

The use of waste generated in the agroindustry can result in increased production at a relatively low cost compared to traditional ingredients, especially for producers with easy access to this waste. This study proposes to estimate the kinetics of passage and degradation of corn, soybean, wheat residues and corn silage in the gastrointestinal tract of cattle. Four rumen-fistulated animals with an average weight of 450 ± 50 kg were assigned to four treatments (corn, soybean, wheat residues and corn silage) in a 4×4 Latin square experimental design. The fiber from the residues and corn silage used to estimate the passage kinetics was marked with potassium dichromate, whereas the in situ technique was employed to estimate the fiber degradation kinetics. A larger potentially degradable fraction and a smaller undegradable fraction were observed for corn residue and corn silage, whereas no differences were detected between the materials for passage kinetics. The residue from corn processing is similar to corn silage in terms of degradation kinetics and mean fiber retention time, while the other residues have worse degradation kinetics than corn, which is due mainly to the elevated undegradable fraction. All the analyzed residues, as well as corn silage, share the same characteristics of fiber passage kinetics.

Encapsulation of β-carotene in Pickering emulsions stabilized by self-aggregated chitosan nanoparticles: Factors affecting β-carotene stability

For conventional emulsions used to encapsulate easily degradable bioactive compounds, achieving small droplet size and high encapsulation capacity is a challenging. Pickering emulsions stabilized by self-aggregated chitosan particles may offer high encapsulation efficiency due to the robust mechanical barrier formed by solid particles adsorbed at the oil-water interface. Therefore, the effects of pH, chitosan concentration, oil volume fraction, homogenization pressure, and homogenization cycle on the stability of chitosan Pickering emulsions and the degradation of β-carotene were investigated. Effective interfacial adsorption of chitosan nanoparticles and moderate homogenization intensity facilitated the formation of small emulsion droplets. Unlike conventional emulsions, chitosan Pickering emulsions with smaller droplets provided enhanced protection for β-carotene. This enhancement was primarily attributed to the improved interfacial coverage of chitosan nanoparticles with smaller droplet sizes, which was advantageous for β-carotene protection. The optimal conditions for preparing β-carotene-loaded chitosan Pickering emulsions were as follows: pH 6.5, chitosan concentration of 1.0 wt%, oil volume fraction of 20 %, homogenization pressure of 90 MPa, and 6 homogenization cycles. These findings indicate that chitosan Pickering emulsions are well-suited for encapsulating β-carotene with both small droplet size and high encapsulation efficiency.

Design and development of pilot plant applied to wind and light abandonment power conversion: Electromagnetic heating of solid particles and steam generator

With the rising capacity of renewable energy electricity but incomplete supporting dissipation equipment, this work develops a new charging and discharging device for electromagnetic heating of solid particles to convert electricity from renewable sources into superheated steam, which achieves battery storage efficiency with sufficient safety, terrain-independent and scalable through paralleling. The study reveals that the electro-thermal conversion efficiency of electromagnetically heated iron ore particles increases with particle mass flow rate at different wall temperatures, reaching a maximum of 93.8% at 500 °C. In contrast, the efficiency trend for quartz sand particles is inconsistent, peaking at 68% due to poor thermal conductivity causing inefficiencies at higher mass flow rates. A dimensionless mathematical model (Re-Nu, Re < 10) for both particles is derived from experimental data, offering theoretical guidance for industrialization. Experiments with a shell-and-tube solid particle-packed bed yield continuous production of 35 kg/h, 300 °C superheated steam for 12 min with an 86.4% discharge efficiency and achieve an 81% cycle efficiency, which surpasses compressed air storage(60%), approaches battery and flywheel efficiency(85%). Economic feasibility analysis for a 5MW/5MWH system under two business models demonstrates a short payback period of 2.62 years when providing industrial steam and 6.4 years when used in thermal power plant flexibility transformation. Technological innovations to improve equipment efficiency are critical to the first business mode (selling steam), while grid-determined peak prices are critical to the latter (thermal flexibility retrofits). The study underscores the technical and economic superiority of the proposed devices for utilizing abandoned wind and light, providing a novel solution for carbon reduction and peak shaving in the context of new energy.

Fabrication, Modeling, and Testing of a Prototype Thermal Energy Storage Containment

Abstract Increasing penetration of variable renewable energy resources requires the deployment of energy storage at a range of durations. Long-duration energy storage (LDES) technologies will fulfill the need to firm variable renewable energy resource output year round; lithium-ion batteries are uneconomical at these durations. Thermal energy storage (TES) is one promising technology for LDES applications because of its siting flexibility and ease of scaling. Particle-based TES systems use low-cost solid particles that have higher temperature limits than the molten salts used in traditional concentrated solar power systems. A key component in particle-based TES systems is the containment silo for the high-temperature (&amp;gt;1100 ∘C) particles. This study combined experimental testing and computational modeling methods to design and characterize the performance of a particle containment silo for LDES applications. A laboratory-scale silo prototype was built and validated the congruent transient finite element analysis (FEA) model. The performance of a commercial-scale silo was then characterized using the validated model. The commercial-scale model predicted a storage efficiency above 95% after 5 days of storage with a design storage temperature of 1200 ∘C. Insulation material and concrete temperature limits were considered as well. The validation of the methodology means the FEA model can simulate a range of scenarios for future applications. This work supports the development of a promising LDES technology with implications for grid-scale electrical energy storage, but also for thermal energy storage for industrial process heating applications.

Pickering emulsions in food and nutraceutical technology: from delivering hydrophobic compounds to cutting-edge food applications

Pickering emulsions have emerged as suitable alternatives to healthily and sustainably deliver unstable compounds, addressing the demands of consumers, increasingly concerned about the nutritional value and environmental impact of the products they consume. They are stabilized by insoluble solid particles that partially hydrate both the oil (O) and aqueous (W) phases through a combination of steric and electrostatic repulsions determined by their surface properties. Since the desorption energy of the particles is very high, their adsorption is considered irreversible, which accounts for their greater stability compared to conventional emulsions. Proteins and polysaccharides, used either individually or in combination, can stabilize Pickering emulsions, and recent studies have revealed that microorganisms are also suitable stabilizing particles. This review provides an overview of recent research on Pickering emulsions, highlighting the properties of the stabilizing particles, and their ability to deliver hydrophobic and/or unstable compounds. The use of Pickering emulsions as fat-replacers, edible inks for 3D-printing or their incorporation into packaging material are also presented and discussed, pointing out their great potential for further innovation.

Microbial communities on microplastics from seawater and mussels: Insights from the northern Adriatic Sea

Microplastics, synthetic solid particles of different sizes (< 5 mm), pose a major challenge to marine ecosystems. Introducing microplastics into the marine environment leads to the formation of complex microbial communities, a topic of growing interest in environmental research. For this study, we selected an area in the northern Adriatic Sea, less affected by human activities, to understand how pristine environmental conditions influence microbial colonization of microplastics. Samples of coastal seawater and Mediterranean mussels (Mytilus galloprovincialis) were collected in a mussel farm near Debeli rtič of the Slovenian coast. Microplastics were isolated, visually and chemically analyzed and DNA was extracted for metagenomics. In the marine water column, 12.7 microplastics per m3 water column and 0.58 microplastics per individual mussel were found. Sufficient DNA was available to analyze six particles, five originating from seawater, and one from a mussel. This was the first-ever sequenced microplastic particle from a mussel. Genera of Pseudomonas and Serratia were identified in all samples. In one of the samples, the most abundant was a marine genus Pseudoalteromonas, while in another sample Campylobacter was present with >30 % abundance. The microbiomes of the mussel- and seawater-isolated particles were similar, suggesting a common microbial colonization pattern, which may have implications for the transfer of microplastic-associated microbes, including potential pathogens, through the food web to the consumers. Microplastic pollution is a complex issue requiring further research, especially regarding microbial biofilms, pathogen colonization and the potential of pathogen transmission via microplastic particles. Our findings enhance the understanding of microplastic pollution in the Adriatic Sea and stress the necessity for comprehensive strategies to mitigate the impact on marine ecosystems.

Controllable stress-adsorbed layers in Ti/TiN/TiAlN coatings: Mechanical performance and micropillar compression

Solid particle erosion often compromises the durability of turbine engine blades, particularly those used in offshore and desert environments. Surface protective coatings have emerged as a promising solution to significantly enhance the erosion resistance of compressor blades. In this study, TiAlN multilayer coatings were deposited onto Ti-6Al-4V substrates using a vacuum arc deposition technique. The article explored the strategic incorporation of TiN-Ti-TiN stress-adsorbed layers (SALs) within TiAlN-based coatings. It also investigated the microscale mechanisms leading to coating failure under conditions of micropillar compression. The findings revealed that the presence of metal/ceramic interfaces significantly improved the adhesion strength, crack resistance, erosion resistance and fracture toughness of the coatings. The multilayer deformation behavior of the coatings was primarily determined by the plastic flow of the softer metal layers. The SALs played a crucial role in reducing the elastic strain energy by generating nanotwins, coherent interfaces, and high-density dislocations during deformation, thereby improving the coatings' plastic deformation capability. Moreover, the implementation of dual-cycle SALs successfully reduced radial crack propagation, facilitating a transition from brittle fracture to a combined brittle-ductile fracture mechanism. This study highlights the critical role of metal/ceramic interfaces and SALs in improving the erosion resistance and co-deformability of TiAlN-based hard coatings.

Liquid Springs for High‐Speed Contamination‐Free Manipulation of Droplets and Solid Particles

AbstractAccurate and flexible control of droplets is essential in many industrial applications, such as water harvesting, chemical assays, and biological detection. Magnetic force‐based methods have been broadly exploited to fulfill the goals due to the advantage of non‐contact, easy control, and long‐range navigation. Nevertheless, it still suffers from some challenges, such as sample fouling, and the paradox between the droplet efficient motion and the large volume. Here a ferrofluid‐based liquid spring to achieve contamination‐free and fast droplet transportation on non‐wetting solid surfaces is proposed. The liquid spring is based on the actuation of a ferrofluid droplet in an external uniform magnetic field. The actuation enables the liquid spring to propel tiny objects, including the non‐magnetic miscible droplets and water‐repellent solid particles, with adjustable motion velocity. Furthermore, the magnetic force, applied on the ferrofluid via an additional permanent magnet, makes it possible to navigate the liquid spring in a programmable way. With the aid of the liquid spring, the single or multiple droplets/solid particles advancing, on‐demand droplets coalescence, and out‐of‐plane droplet motion are achievable.

Study of the microstructure of asphalt concrete using X-ray computed tomography

A mechanical digital twin (a mechanical finite-element model) of an asphalt concrete sample has been developed in the framework of a project for recycling polymer composite materials with fibrous reinforcement (fiberglass) as an alternative for crushed stone in the asphalt concrete production. A methodology of using X-ray computed tomography (XCT) for analysis of the asphalt concrete microstructure and calculation of the mechanical properties is developed. The data processing chain for developing a digital twin of the asphalt concrete microstructure, based on X-ray micro-computed tomography (XCT) image includes the following steps: 1) image enhancement; 2) image segmentation; 3) analysis of the morphology of pores and solid particles; 4) transformation of the segmented image into a voxels-based finite element (FE) model. It is demonstrated that the XCT resolution of 40 μm is sufficient for a reliable identification of microstructural parameters, i.e., volume fractions of the components, distributions of voids (pores) in size, shape and spatial position, as well as distributions of the crushed brittle additives (fiberglass chips) in size. The FE model constitutes a digital twin of the material, and, after specifying the characteristics of the material components, can be used for simulation of the thermomechanical and functional properties of the material. The developed procedure is exemplified in the calculation of statistics of the compression and shear moduli of the asphalt concrete with addition of crushed fiberglass particles. The dependence of the calculated elastic properties on the size of the digital twin is studied. It is shown that a model size of 10 mm and more is sufficient for the microstructural representativity and calculation of the homogenization characteristics. The results can be used for analysis of the microstructure and structure-dependent thermomechanical properties of asphalt concrete. The developed finite element model can be used for modelling of the visco-elastic response of asphalt concrete and its behavior under cyclic loading.

A non-contact solid particle moisture sensor based on near-infrared spectroscopy technology

The detection of moisture content in solid particles has important applications in fields such as biological research, coal mine production, and medicine. This article develops a non-contact solid particle moisture sensor (NcSPMS). NcSPMS uses the multi-light source detection method based on the principle of diffuse reflection absorption to detect the moisture content of solid particles with different particle sizes, distributions and colors. Firstly, the stacked LED light source structure (SLED-LSS) was designed to achieve illumination of LED light source for measurement (M-LED) and the LED light source for reference (R-LED) at the same position and exit angle, eliminating the influence of irregular particle size and distribution on diffuse reflected light intensity. Secondly, the stacked LED array light source structure (SLEDA-LSS) was designed to improve the detection light intensity and enable NcSPMS to detect the moisture content of solid particles of different colors. Thirdly, modulated light technology is used for the transmission of moisture content information. Two modulation frequencies were set to modulate the measurement light source and reference light source, and different intensities of square wave currents were determined to drive the M-LED and R-LED to improve detection accuracy. Fourthly, the FFT-KF data processing method was designed to effectively extract the information of diffuse reflection measurement light intensity. Finally, the function expression of moisture content was obtained through cubic fitting, and the detection of moisture content by NcSPMS was achieved. In order to verify the effectiveness of NcSPMS, the NcSPMS control system was designed. The experimental results show that compared with SLED-LSS, SLEDA-LSS improves measurement accuracy; the different current pairs driving M-LED and R-LED affect the measurement accuracy of NcSPMS; NcSPMS can detect the moisture content of white, yellow, green, red, and black sand particles, with the detection range of 0.10–11.00 %. The relative uncertainty obtained by applying NcSPMS to the detection of nickel ore particles is 4.37 %.