Surfactant Sodium Dodecyl Sulfate Research Articles

Highly 002-Oriented Dendrite-Free Anode Achieved by Enhanced Interfacial Electrostatic Adsorption for Aqueous Zinc-Ion Batteries.

Rechargeable aqueous zinc-ion batteries (AZIBs) are gaining recognition as promising next-generation energy storage solution, due to their intrinsic safety and low cost. Nevertheless, the advancement of AZIBs is greatly limited by the abnormal growth of zinc dendrites during cycling. Electrolyte additives are effective at suppressing zinc dendrites, but there is currently no effective additive screening criterion. Herein, we propose employing the interfacial electrostatic adsorption strength of zinc ions for the initial screening of additives. Subsequently, dendrite-free plating is achieved by employing the anionic surfactant sodium dodecyl benzenesulfonate (SDBS) to enhance electrostatic adsorption. The cycled zinc anode exhibited a dense plating morphology and a high (002) orientation (I002/I101 = 22). The Zn||MnO2 full cell with SDBS exhibited a capacity retention of 85% after 1000 cycles at 1 A g-1. Furthermore, an instantaneous nucleation model and continuous nucleation model (CNM) are constructed to reveal the microscale plating/stripping dynamics under the scenarios of weak adsorption and strong adsorption. The CNM accurately explains the self-optimizing reconstruction of electrodes resulting from enhanced electrostatic adsorption. Our exploration was extended to other anionic surfactants (sodium dodecyl sulfate and disodium laureiminodipropionate), confirming the effectiveness of strong electrostatic adsorption in the screening of electrolyte additives.

Molecular interactional study of SDS and CTAB in aqueous medium of anti-HIV drugs (Emtricitabine and Lamivudine) at different temperatures: A physicochemical investigation

The present study deals with the interactions of Emtricitabine and Lamivudine (anti-HIV drugs) with anionic surfactant sodium dodecylsulphate (SDS) and cationic surfactant cetyltrimethylammonium bromide (CTAB) at (298.15–313.15) K temperature range by volumetry, compressibility and viscometric approach. The experimental values of sound velocity and density are used to compute various parameters such as apparent molar volume (φv), isentropic compressibility (κs), and apparent molar adiabatic compression (φκ) by employing cosphere overlap model. Relative viscosity parameter (ηr) evaluated from viscosity data also helps to understand various interactions prevalent in surfactant-drug-water ternary system. This attempt of extracting information about various physicochemical interactions of anti-HIV drugs with surfactants can prove beneficial to develop novel anti-HIV agents with better viral resistance activity.

Temperature dependence of the near infrared absorption spectrum of single-wall carbon nanotubes dispersed by sodium dodecyl sulfate in aqueous solution: experiments and molecular dynamics study.

Single-wall carbon nanotubes (SWCNT) dispersed in water with the help of sodium dodecyl sulfate (SDS) surfactants exhibit a temperature dependent near infrared (NIR) exciton spectrum. Due to their biocompatibility and NIR spectrum falling within the transparent window for biological tissue, SWCNTs hold potential for sensing temperature inside cells. Here, we seek to elucidate the mechanism responsible for this temperature dependence, focusing on changes in the water coverage of the SWCNT as the surfactant structure changes with temperature. We compare optical absorption spectra in the UV-Vis-IR range and fully atomistic molecular dynamics (MD) simulations. The observed temperature dependence of the spectra for various SWCNTs may be attributed to changes in the dielectric environment and its impact on excitons. MD simulations reveal that the adsorbed SDS molecules effectively shield the SWCNT, with ~ 70% of water molecules removed from the first two adlayers; this coverage shows a modest temperature dependence. Although we are not able to directly demonstrate how this influences the NIR spectrum, this represents a potential pathway given the strong influence of the water environment on the excitons in SWCNTs. Optical absorption measurements were carried out in the UV-Vis-NIR range using a Varian Cary 5000 spectrophotometer in a temperature-controlled environment. PeakFit™ v. 4.06 was used as peak-fitting program in the spectral range 900-1400nm (890-1380meV) as a function of the temperature. Fully atomistic molecular dynamics simulations were conducted using the NAMD2 package. The CHARMM force field comprising two-body bond stretching, three-body angle deformation, four-body dihedral angle deformation, and nonbonded interactions (electrostatic and Lennard-Jones 6-16 potentials) was employed.

The role of the cation and anion in aqueous liquid chromatography with sodium dodecyl sulphate and imidazolium-based ionic liquids as mobile phase reagents

BackgroundIn reversed-phase liquid chromatography, solute retention is primarily influenced by interactions between a nonpolar stationary phase and a moderately polar hydro-organic mobile phase, based on the solute lipophilicity. However, challenges regarding retention and peak tailing can arise due to ionic interactions between positively charged analytes and free silanols present on silica-based stationary phases. To address these challenges, incorporating surfactants and ionic liquids (ILs) into the mobile phase offers an effective solution. These additives synergistically enhance chromatographic performance through electrostatic and lipophilic interactions, which enable fine-tuning of selectivity and improved separation efficiency. ResultsThis study explores the chromatographic behaviour of several basic compounds in aqueous mixtures containing the anionic surfactant sodium dodecyl sulphate (SDS), above its critical micellar concentration, combined with various 1-alkyl-3-methylimidazolium-based ionic liquids (ILs) featuring chloride, tetrafluoroborate, and hexafluorophosphate anions, all without the addition of organic solvents. Specifically, this research investigates the influence of different anion types within the ILs and considers the impact of the IL cations. Analysis of solute peak profiles reveals narrow and symmetrical peaks. By introducing tetrafluoroborate and hexafluorophosphate IL anions into a mobile phase that contains an anionic surfactant, the study sheds light on the interactions occurring within the chromatographic column. This enhanced understanding of the combined effects of surfactants and ILs contributes to refining chromatographic methodologies. SignificanceThis research highlights the importance of carefully selecting the appropriate IL when incorporating it into a micellar mobile phase alongside SDS. This combination results in practical retention times that surpass the performance achieved with either the surfactant or IL alone in the mobile phase. The study particularly emphasises the impact of the IL anion, especially in the absence of SDS and organic solvents. This unveils interactions that are otherwise obscured in micellar and hydro-organic media, providing new insights into chromatographic dynamics.

The role of the cation and anion in aqueous liquid chromatography with sodium dodecyl sulphate and imidazolium-based ionic liquids as mobile phase reagents

BackgroundIn reversed-phase liquid chromatography, solute retention is primarily influenced by interactions between a nonpolar stationary phase and a moderately polar hydro-organic mobile phase, based on the solute lipophilicity. However, challenges regarding retention and peak tailing can arise due to ionic interactions between positively charged analytes and free silanols present on silica-based stationary phases. To address these challenges, incorporating surfactants and ionic liquids (ILs) into the mobile phase offers an effective solution. These additives synergistically enhance chromatographic performance through electrostatic and lipophilic interactions, which enable fine-tuning of selectivity and improved separation efficiency. ResultsThis study explores the chromatographic behaviour of several basic compounds in aqueous mixtures containing the anionic surfactant sodium dodecyl sulphate (SDS), above its critical micellar concentration, combined with various 1-alkyl-3-methylimidazolium-based ionic liquids (ILs) featuring chloride, tetrafluoroborate, and hexafluorophosphate anions, all without the addition of organic solvents. Specifically, this research investigates the influence of different anion types within the ILs and considers the impact of the IL cations. Analysis of solute peak profiles reveals narrow and symmetrical peaks. By introducing tetrafluoroborate and hexafluorophosphate IL anions into a mobile phase that contains an anionic surfactant, the study sheds light on the interactions occurring within the chromatographic column. This enhanced understanding of the combined effects of surfactants and ILs contributes to refining chromatographic methodologies. SignificanceThis research highlights the importance of carefully selecting the appropriate IL when incorporating it into a micellar mobile phase alongside SDS. This combination results in practical retention times that surpass the performance achieved with either the surfactant or IL alone in the mobile phase. The study particularly emphasises the impact of the IL anion, especially in the absence of SDS and organic solvents. This unveils interactions that are otherwise obscured in micellar and hydro-organic media, providing new insights into chromatographic dynamics.

Role of surfactants in the degradation and sustainable dyeing for reactive dyeing wastewater

To enhance the decolorization rate of thermally activated sodium persulfate in dye wastewater, C.I. Reactive Black 5 (RB5) was investigated in this study, which was evaluated by the decolorization of the dye solution. The effect of surfactant concentration (including anionic surfactant sodium dodecyl sulfate (SDS), nonionic surfactant Tween 80 (TW-80) and amphoteric surfactant (BS-12)), SPS concentration, and reaction temperature on the degradation of RB5 was studied. Furthermore, the relationship between free radicals and RB5 degradation was investigated. The results showed that the addition of SDS and TW-80 would inhibit the decolorization of RB5. Correspondingly, the effect would enlarge as the surfactant concentration increased. Nevertheless, the addition of BS-12 wouldn’t affect the final decolorization of RB5 dye solution, despite it could increase the decolorization rate in the initial stage. After 10 min of decolorization, compared to the dye liquor without BS-12, the decolorization could increase by 9.07 % and 0.69 %, respectively, after adding 0.5 and 1.0 CMC of BS-12. Besides, when reactive dyes were degraded by thermally activated sodium persulfate, the SO4-· and ·OH would work together, and SO4-· played a major role while ·OH played an auxiliary part. When the treated wastewater was used for dyeing, the addition of BS-12 could effectively regulate the dyeing rate. The fixation and K/S value were increased by 1.1 % and 0.20, respectively. Furthermore, the dyed fabrics also exhibited improved uniformity, with negligible differences in color fastness. The effects of adding SDS were similar to BS-12, while it decreased the exhaustion and fixation rate of RB5. In addition, non-ionic TW-80 was unfavorable to dyeing. This work provides a new way for efficient treatment of dyeing wastewater as well as reuse, opening an environmentally friendly treatment concept.

Formation and survival of clay-mediated protocell membranes composed of single-chain amphiphiles in aqueous solutions

Protocell compartments composed of simple amphiphilic molecules could have survived on the clay mineral surfaces which can serve well as plausible sites for prebiotic chemistry on the early Earth. Herein we chose four common single-chain amphiphiles (SCAs), including the anionic surfactant sodium dodecyl sulfate (SDS) and sodium dodecylbenzenesulfonate (SDBS), the cationic surfactant dodecyltrimethylammonium bromide (DTAB) and the zwitterionic lauryl sulfobetaine (LSB)), as model constituents of early membranes to establish a tentative model for protocell compartment. Positively charged Mg2Al-/Mg2Fe-layered double hydroxides (LDHs) and FeS2 are viewed as models of clay minerals. We demonstrate by comprehensively experimental study that unconventional vesicles can be easily promoted in a SCA aqueous micellar solution in the presence of model particles. Morphology evolutions are traced by collecting samples from mixtures of LDHs and SCA aqueous solutions and then recording at different incubation times via negative-staining or cryo-transmission electron microscopy (NS-TEM or cryo-TEM) and dynamic light scattering (DLS). Additionally, the stability of SCA bilayer membranes under possible prebiotic environment are tentatively studied. This work not only offers a robust yet versatile approach for the fabrication of novel vesicles but also provides new insights into the origin of cellular life.

Green and sensitive detection of olopatadine in aqueous humor using a signal-on fluorimetric approach: GREEnness assessment.

Olopatadine (OLP) is widely utilized as an effective antihistaminic drug for alleviating ocular itching associated with allergic conjunctivitis. With its frequent usage in pharmacies, there arises a pressing need for a cost-effective, easily implementable, environmentally sustainable detection method with high sensitivity. This study presents a novel signal-on fluorimetric method for detecting OLP in both its pure form and aqueous humor. The proposed approach depends on enhancing the weak intrinsic fluorescence emission of OLP, achieving a remarkable increase of up to 680% compared to its intrinsic fluorescence. This enhancement is achieved by forming micelles around protonated OLP using an acetate buffer (pH 3.6) and incorporating a solution of sodium dodecyl sulfate (SDS) surfactant. A strong correlation (R = 0.9996) is observed between the concentration of OLP and fluorescence intensities ranging from 1.0 to 100.0 ng mL-1 with a limit of detection of 0.22 ng mL-1. This described method is successfully employed for quantifying OLP in both its powder form and pharmaceutical eye drops. Furthermore, it demonstrates robust performance in determining OLP in artificial aqueous humor with a percentage recovery of 99.05 ± 1.51, with minimal interference from matrix interferents. Moreover, the greenness of the described method was evaluated.

Thermodynamic characteristics and surface free energy analysis of bifonazole and lecithin with sodium dodecyl sulfate in hydroethanolic solvent systems

The thermodynamic investigations of the well-recognised antifungal drug bifonazole and lecithin with anionic surfactant sodium dodecyl sulphate have been established. The experiments were conducted using five distinct hydro-ethanolic concentrations, namely 0% v/v, 10% v/v, 30% v/v, 70% v/v, and 90% v/v ethanol, throughout a range of five temperatures (ranging 20 ℃, 25 ℃, 30 ℃, 35 ℃ and 40 ℃) with an increment of drug concentration. The study involved the determination of several parameters, including surface tension (σ), density (ρ), conductivity (κ), contact angle (θ) and surface free energy. Conductivity and surface tension data was used for calculating critical micelle concentration (CMC). CMC was utilised to calculate various thermodynamic properties, such as the standard entropy change (ΔS°m), standard Gibbs energy change (ΔG°m) and standard enthalpy change (ΔH°m) of micellization. This study represents a comparative analysis of the critical micelle concentration (CMC) by utilising surface tension and conductivity measurements. Contact angle is used to determine the hydrophobicity and hydrophilicity of the system. These investigations are valuable for examining the magnitude of hydrophobic interactions within the system, which might be used to ascertain an optimal concentration of bifonazole, lecithin and surfactant to prepare ethosomal formulations.

Characterization of the Solution Properties of Sodium Dodecylsulphate Containing Alkaline–Surfactant–Polymer Flooding Media

Alkaline–surfactant–polymer (ASP) flooding by means of which alkali additives, surfactant and polymer are inserted as the same slug is one of the most favourable worldwide focuses of Chemical Enhanced Oil Recovery (cEOR) research and field trials, due to the individual synergy of the three chemical components. To develop efficient oil recovery chemicals, it is essential to fully understand the mechanism behind ASP flooding. Nonetheless, there are hardly any studies reporting a systematic characterization of the ASP process. Thus, the present paper focuses on modelling this process in a laboratory by the use of an anionic surfactant—sodium dodecyl sulphate (SDS) in alkaline–polymer media—which is composed of a commercial water-soluble polymer (Flopaam AN125SH®, SNF Floerger, Andrézieux-Bouthéon, France) and alkali compounds (NaOH and Na2CO3). The samples were characterized using rheometry, dynamic light scattering (DLS), infrared spectroscopy (IR) and measurement of inferfacial tension (IFT) between the samples and rapeseed oil. In accordance with the experimental results, surprisingly lower IFT values were recorded between the alkaline–polymer solutions and rapeseed oil than the samples which contained SDS. Increasing polymer and sodium chloride concentration caused a decrease (from 0.591 mN/m to 0.0486 mN/m) in IFT between the surfactant containing samples and rapeseed oil. The IR measurements confirmed that the surfactant was not detected in the oil phase in the absence of NaOH and Na2CO3. The effects of SDS on the viscosity of the mixtures were also investigated, as viscosity is a considerably important parameter in processes using polymers.

High-efficiency triplet-triplet annihilation upconversion microemulsion with facile preparation and decent air tolerance.

Current research of triplet-triplet annihilation upconversion (TTA-UC) faces difficulty such as overuse of organic solvents and quenching of excited triplet sensitizers by molecular oxygen. Herein, we propose an efficient and facile preparation strategy of TTA-UC microemulsion to overcome these issues. With simple device and short preparation process, air-stable TTA-UC with a high upconversion efficiency of 16.52% was achieved in microemulsion coassembled from TritonX114, tetrahydrofuran and upconverting chromophores (platinum octaethyl-porphyrin and 9,10-diphenylanthracene). This is comparable to the highest UC efficiency ever reported for TTA-UC microemulsion systems. The excellent UC performance of TX114-THF could be attributed to two perspectives. Firstly, small-size micelle accommodated chromophores up to high concentrations in organic phase, which promoted efficient molecular collision. Additionally, high absorbance at 532nm ensured full use of excitation light, getting more long wavelength photons involved in the TTA-UC process. Moreover, air-stable TTA-UC also performed well in microemulsion with various surfactants, including nonionic surfactants (Tween 20, Tween 80, Triton X-110, Triton X-114), ionic surfactants (sodium dodecyl sulfate, cetyltrimethyl ammonium bromide) and block copolymers (pluronic F127, pluronic P123), through three conjectural assembly models according to the structural characteristics of surfactant molecules (concentrated, uncompacted and scattered). These discoveries could provide estimable reference for selection of surfactants in relevant fields of TTA-UC.

Surfactant Partitioning Dynamics in Freshly Generated Aerosol Droplets.

Aerosol droplets are unique microcompartments with relevance to areas as diverse as materials and chemical synthesis, atmospheric chemistry, and cloud formation. Observations of highly accelerated and unusual chemistry taking place in such droplets have challenged our understanding of chemical kinetics in these microscopic systems. Due to their large surface-area-to-volume ratios, interfacial processes can play a dominant role in governing chemical reactivity and other processes in droplets. Quantitative knowledge about droplet surface properties is required to explain reaction mechanisms and product yields. However, our understanding of the compositions and properties of these dynamic, microscopic interfaces is poor compared to our understanding of bulk processes. Here, we measure the dynamic surface tensions of 14-25 μm radius (11-65 pL) droplets containing a strong surfactant (either sodium dodecyl sulfate or octyl-β-D-thioglucopyranoside) using a stroboscopic imaging approach, enabling observation of the dynamics of surfactant partitioning to the droplet-air interface on time scales of 10s to 100s of microseconds after droplet generation. The experimental results are interpreted with a state-of-the-art kinetic model accounting for the unique high surface-area-to-volume ratio inherent to aerosol droplets, providing insights into both the surfactant diffusion and adsorption kinetics as well as the time-dependence of the interfacial surfactant concentration. This study demonstrates that microscopic droplet interfaces can take up to many milliseconds to reach equilibrium. Such time scales should be considered when attempting to explain observations of accelerated chemistry in microcompartments.

GO and surfactant assisted regulation of polyamide nanofiltration membranes for improved separation performance

Fabricating nanofiltration membranes with high water permeance and selectivity by tailoring the structure and morphology is crucial to efficient water purification. In this work, the fabrication of thin film nanocomposite (TFN) nanofiltration membranes by combining two methods, the surfactant-assembly interfacial polymerization (SARIP) and the addition of graphene oxide (GO) or ionic liquid functionalized graphene oxide (GO-IL) for the preparation of the selective PA layer on a novel porous substrate is reported. For the preparation of the porous substrate, mechanically robust, aromatic polyethers containing polar pyridine units (PDSPP) were chosen targeting to improved hydrophilicity and thus enhanced water permeability. The anionic sodium dodecyl sulfate (SDS) surfactant was used to regulate the interfacial polymerization thereby enabling the formation of dense PA layers with high cross-linking degree and consequently high salt rejections. On the other hand, the addition of GO/GO-IL nanosheets could impart hydrophilicity and antifouling properties. The novel porous PDSPP substrate was selected for the fabrication of TFN membranes due to its improved water permeability and superior salt rejection and increased hydrophilicity compared to commercial PSf substrate. The detailed study of the fabricated TFN membranes by ATR-FT-IR, SEM, AFM, XPS, contact angle measurements revealed the formation of polyamide selective layers with rougher surfaces, increased hydrophilicity and high cross-linking degrees (from 44 % to 94 %), resulted from the synergistic effect of SDS and GO incorporation. Moreover, the prepared TFN membranes exhibited high salt rejections while maintaining a moderate water permeability. In particular, the membrane containing the neat GO (TFNGO50) displayed excellent Na2SO4 and MgSO4 rejections (98.8 % and 99.5 %, respectively) while the NaCl rejection was 47.0 % and a water permeability value of 4.2 L m-2h−1 bar−1. The divalent salt rejections were among the highest values reported in the literature in comparison with commercial NF membranes and TFN membranes containing GO/functionalized GO. When GO-IL nanosheets were embedded in the PA layer, the water permeability was slightly improved while the salt rejections were significantly reduced compared to TFNGO50. Lastly, the incorporation of GO enhanced the anti-fouling properties of the prepared membranes due to increased hydrophilicity of the PA surface.

Morphological aspects and the effectiveness of photodynamic inactivation against Rhizopus oryzae in different life cycles.

Mucormycosis is an extremely aggressive fungal disease with a high mortality rate, especially in people with compromised immune systems. Most cases of mucormycosis are caused by the fungus Rhizopus oryzae. The treatments used are based on high doses of antifungals, associated with surgical resections, when it is possible. However, even with this aggressive treatment, the estimated attributable mortality rate is high. There is therefore a need to develop adjuvant treatments. Photodynamic Inactivation (PDI) may be an auxiliary therapeutic option for mucormycosis. Due to the lack of reports in the literature on the morphology and photodynamic inactivation of R. oryzae, characterization of the fungus using Confocal Microscopy and Transmission Electron Microscopy, and different protocols using Photodithazine® (PDZ), a chlorin e6 compound, as a photosensitizer, were performed. The fungus growth rate under different concentrations and incubation times of the photosensitizer and its association with the surfactant Sodium Dodecyl Sulphate (SDS) was evaluated. For the hyphae, both in the light and dark phases, in the protocols using only PDZ, no effective photodynamic response was observed. Meanwhile with the combination of SDS 0.05% and PDZ, inhibition growth rates of 98% and 72% were achieved for the white and black phase, respectively. In the conidia phase, only a 1.7 log10 reduction of the infective spores was observed. High concentration of melanin and the complex and resistant structures, especially at the black phase, results in a high limitation of the PDI inactivation response. The combined use of the SDS resulted in an improved response, when compared to the one obtained with the amphotericin B treatment.

Surface modification for enhanced Anti‐Wetting properties of electrospun omniphobic membranes in membrane distillation

AbstractMembrane wetting caused by substances in the feed solution with low surface tension has posed serious issues for membrane distillation (MD). Omniphobic membranes could be helpful when dealing with this problem because they strongly repel liquids with a wide range of surface tensions. We fabricated electrospun omniphobic membranes containing PVDF‐TEOS‐PFDTMS, PVDF‐HFP‐TMOS‐PFDTMS, and PVDF‐HFP‐TEOS‐PFDTMS. All electrospun membranes have shown contact angles >90°, but the electrospun membrane containing PVDF‐HFP‐TEOS‐PFDTMS has shown super repellence with a contact angle >150° and maintains stable salt rejection and water flux in direct contact MD processes in the presence of sodium dodecyl sulfate surfactant (up to 0.3 mM). Furthermore, the morphology and crystallinity of the electrospun membranes were studied by scanning electron microscopy and Fourier‐transform infrared spectroscopy, and the percentage composition of elements was analyzed by x‐ray photoelectron spectroscopy. liquid entry pressure, mechanical strength, and the porosity of the electrospun omniphobic membranes were also studied.

Sensitive Voltammetric Detection of Acetaminophen on CuONPs-MWCNTs Modified Glassy Carbon Electrode with Enhancement Effect of Anionic Surfactant

In the present work, a voltammetric method using differential pulse voltammetric technique for the assessment of antipyretic and analgesic drug, acetaminophen was developed. The CuO nanoparticles were prepared and characterized. A glassy carbon electrode (GCE) fabricated with the suspension of CuO nanoparticles (CuONPs) and multi-walled carbon nanotubes (MWCNTs) were used. The modified electrode showed improved anodic peak current by introducing an anionic surfactant sodium dodecyl sulphate in phosphate buffer solution. The consequence of pH of supporting electrolyte, amount of nanoparticles suspension and surfactant concentration was investigated at a physiological pH of 7.4. Using differential pulse voltammetry, the fabricated electrode showed linear dynamic range from 9 to 160 nM of acetaminophen concentration. From the calibration plot, the computed detection limit was 5.06 nM and quantification limit was 16.88 nM. The developed method was checked for its reproducibility and assay during a day and intraday as well. The developed process was fruitfully applied to detect acetaminophen in pediatric oral suspensions administered to infants.

Modulating protein unfolding and refolding via the synergistic association of an anionic and a nonionic surfactant

HypothesisNonionic surfactants can counter the deleterious effect that anionic surfactants have on proteins, where the folded states are retrieved from a previously unfolded state. However, further studies are required to refine our understanding of the underlying mechanism of the refolding process. While interactions between nonionic surfactants and tightly folded proteins are not anticipated, we hypothesized that intermediate stages of surfactant-induced unfolding could define new interaction mechanisms by which nonionic surfactants can further alter protein conformation. ExperimentsIn this work, the behavior of three model proteins (human growth hormone, bovine serum albumin, and β-lactoglobulin) was investigated in the presence of the anionic surfactant sodium dodecylsulfate, the nonionic surfactant β-dodecylmaltoside, and mixtures of both surfactants. The transitions occurring to the proteins were determined using intrinsic fluorescence spectroscopy and far-UV circular dichroism. Based on these results, we developed a detailed interaction model for human growth hormone. Using nuclear magnetic resonance and contrast-variation small-angle neutron scattering, we studied the amino acid environment and the conformational state of the protein. FindingsThe results demonstrate the key role of surfactant cooperation in defining the conformational state of the proteins, which can shift away or toward the folded state depending on the nonionic-to-ionic surfactant ratio. Dodecylmaltoside, initially a non-interacting surfactant, can unexpectedly associate with sodium dodecylsulfate-unfolded proteins to further impact their conformation at low nonionic-to-ionic surfactant ratio. When this ratio increases, the protein begins to retrieve the folded state. However, the native conformation cannot be fully recovered due to remnant surfactant molecules still adsorbed to the protein. This study demonstrates that the conformational landscape of the protein depends on a delicate interplay between the surfactants, ultimately controlled by the ratio between them, resulting in unpredictable changes in the protein conformation.

Influence of Surfactant on the Skin Permeation of Methylisothiazolinone and Methylchloroisothiazolinone.

Patch tests are often used in safety evaluations to identify the substance causing skin irritation, but the same substance can sometimes give positive or negative results depending on the test conditions. Here, we investigated differences in the skin penetration of two test compounds under different application conditions. We studied the effects of the anionic surfactant sodium dodecyl sulfate (SDS) and the nonionic surfactant polysorbate 80 (PS) on skin penetration of the preservatives methylisothiazolinone (MT) and methylchloroisothiazolinone (MCT), which are used in cosmetics such as shampoos. The skin permeation of MT was enhanced by SDS but was unchanged by PS. Skin impedance decreased in the presence of SDS whereas PS had the same effect as the control aqueous solution, suggesting that SDS reduction of the barrier function of skin affects the permeation of MT, a hydrophilic drug. Application of a mixture of MCT and MT in the presence of SDS did not affect the skin permeation of MCT whereas the permeation of MT was enhanced by SDS, indicating that the skin permeation of MCT is less affected by SDS than is MT. Thus, attention should be paid to the possible effect of co-solutes, especially hydrophilic drugs.

A Janus membrane with silica nanoparticles interlayer for treating coal mine water via membrane distillation

The use of membrane distillation (MD) technology to treat coal mine water content has great potential, and the Janus membrane is very resistant to scaling and wetting during MD. In this work, SiO2 nanoparticles were electrostatically adsorbed onto the surface of a polyvinylidene fluoride (PVDF) membrane, followed by the construction of a polyamide (PA) layer through interfacial polymerization (IP). The intermediate layer of SiO2 nanoparticles can promote the enrichment of amine monomers during the subsequent IP process as well as slow its entry into the organic phase to regulate the PA layer. The addition of SiO2 nanoparticles was increased from 0 to 0.10 %, and the thickness of the polyamide layer was also reduced from 225.1 nm to 102.3 nm. Compared with the original membrane vapor flux of 40.9 ± 1.0LMH, the modified membrane vapor flux slightly increased to 46.2 ± 0.9LMH, but excessive SiO2 nanoparticles blocked the membrane pore, resulting in a decrease in flux. MD experiments show that the Janus membrane is wettability and scaling resistance when passing through the salt solution containing sodium dodecyl sulfate (SDS) surfactant or simulated wastewater as feed. At the same time, the interface thermodynamics of the simulated wastewater and the membrane are calculated to understand the anti-scaling mechanism of the membrane, offering a theoretical foundation for the application of real mine water.

Interfacial and ion-pairing catalysis for oxygen-tolerant large-scale ATRP in ab initio emulsion

A cooperative interfacial and ion-pairing catalysis, coupled with a molecular oxygen reduction reaction (ORR), to scale up an Atom Transfer Radical Polymerization of n-butyl acrylate (BA) from 20 mL to 10 L (scale-up factor = 500) in ab initio emulsion conditions is introduced. The polymerization is driven by the regeneration of [CuIL]+ through CuII/Cu0 comproportionation. [CuIL]+ simultaneously converts O2 to H2O2 (which is then degraded by sodium pyruvate) and drives the polymerization of butyl acrylate. The anionic surfactant sodium dodecyl sulfate (SDS) facilitates catalyst transport inside and outside the micelles by ion-pairing catalysis. n-Butyl acrylate polymerizations are investigated on a small scale with Cu0 wire and on a larger scale with Cu0 powder. On a 10 L scale, the polymerization yielded controlled PBA-Br (Mn = 32.3 × 103; Ð = 1.39, ∼1.64 kg) after 9 h. Chain extension of PBA-Br macroinitiators proved their livingness. An on-line electrochemical monitoring was also introduced to determine the instantaneous CuI and CuII concentrations at the Cu0 wire surface during the polymerization.