Surfactant Sodium Dodecyl Sulfate Research Articles

Crosslinking and fluorination reinforced PTFE nanofibrous membrane with excellent amphiphobic performance for low-scaling membrane distillations

Membrane distillation (MD) has emerged as a promising technology for desalination and concentration of hypersaline brine. However, the efficient preparation of a structurally stable and salinity-resistant membrane remains a significant challenge. In this study, an amphiphobic polytetrafluoroethylene nanofibrous membrane (PTFE NFM) with exceptional resistance to scaling has been developed, using an energy-efficient method. This innovative approach avoids the high-temperature sintering treatment, only involving electrospinning with PTFE/PVA emulsion and subsequent low-temperature crosslinking and fluorination. The impact of the PVA and PTFE contents, as well as the crosslinking and subsequent fluorination on the morphology and MD performance of the NFM, were systematically investigated. The optimized PTFE NFM displayed robust amphiphobicity, boasting a water contact angle of 155.2º and an oil contact angle of 132.7º. Moreover, the PTFE NFM exhibited stable steam flux of 52.1 L·m−2·h−1 and 26.7 L·m−2·h−1 when fed with 3.5 wt % and 25.0 wt % NaCl solutions, respectively, and an excellent salt rejection performance (99.99 %, ΔT = 60 °C) in a continuous operation for 24 h, showing exceptional anti-scaling performance. It also exhibited stable anti-wetting and anti-fouling properties against surfactants (sodium dodecyl sulfate) and hydrophobic contaminants (diesel oil). These results underscore the significant potential of the PTFE nanofibrous membrane for practical applications in desalination, especially in hypersaline or polluted aqueous environments.

Synthesis of carbon quantum dots via electrochemically-induced carbon dioxide nanobubbles exfoliation of graphite for heavy metal detection in wastewater

Carbon quantum dots (CQDs) offer significant promise across industries due to their distinctive optical properties and strong biocompatibility. However, conventional synthesis methods frequently need more precision in controlling nanoparticle size, shape, and uniformity, limiting their versatility in diverse applications. Therefore, this study introduced an innovative approach to synthesising CQDs by combining electrochemical techniques with carbon dioxide (CO2) nanobubbles, circumventing the need for conventional surfactant-based exfoliation. According to the findings, the synthesised CQDs exhibited remarkable properties, including a high quantum yield of 26.17% and an average particle size of 2.24 ± 1.07 nm. Such characteristics render them exceptionally suitable for portable sensors for heavy metal detection in wastewater. Moreover, the investigation revealed the outstanding selectivity of the synthesised CQDs, particularly towards iron (Fe3+) ions, but demonstrated limited reactivity towards lead (Pb2+) and copper (Cu2+) ions. The novel approach also generated non-toxic CQD under the supply of CO2 nanobubbles, which offers a scalable avenue for developing advanced materials for various applications, including sensors for heavy metal ion detection in wastewater. The conventional synthesis method that relied on sodium dodecyl sulphate (SDS) surfactants without CO2 nanobubbles yielded CQDs with a significantly lower quantum yield of 11.2%. In short, incorporating CO2 nanobubbles with electrochemical techniques enhanced quantum yield and superior control over the size and shape of the synthesized CQDs. This novel method successfully produced CQDs with scalable distinct morphologies and provided a new understanding of the CQD synthesis mechanism, with potential applications in portable sensing for environmental monitoring and water quality management.

Boundary Lubrication Performance of Polyelectrolyte-Surfactant Complexes on Biomimetic Surfaces.

Aqueous mixtures of oppositely charged polyelectrolytes and surfactants are useful in many industrial applications, such as shampoos and hair conditioners. In this work, we investigate the friction between biomimetic hair surfaces in the presence of adsorbed complexes formed from cationic polyelectrolytes and anionic surfactants in an aqueous solution. We apply nonequilibrium molecular dynamics (NEMD) simulations using the coarse-grained MARTINI model. We first developed new MARTINI parameters for cationic guar gum (CGG), a functionalized, plant-derived polysaccharide. The complexation of CGG and the anionic surfactant sodium dodecyl sulfate (SDS) on virgin and chemically damaged biomimetic hair surfaces was studied using a sequential adsorption approach. We then carried out squeeze-out and sliding NEMD simulations to assess the boundary lubrication performance of the CGG-SDS complex compressed between two hair surfaces. At low pressure, we observe a synergistic friction behavior for the CGG-SDS complex, which gives lower shear stress than either pure CGG or SDS. Here, friction is dominated by viscous dissipation in an interfacial layer comprising SDS and water. At higher pressures, which are probably beyond those usually experienced during hair manipulation, SDS and water are squeezed out, and friction increases due to interdigitation. The outcomes of this work are expected to be beneficial to fine-tune and screen sustainable hair care formulations to provide low friction and therefore a smooth feel and reduced entanglement.

Molecular Dynamics Simulations of the Short-Chain Fluorocarbon Surfactant PFHXA and the Anionic Surfactant SDS at the Air/Water Interface.

The research and development of alternatives to long-chain fluorocarbon surfactants are desperately needed because they are extremely toxic, difficult to break down, seriously harm the environment, and limit the use of conventional aqueous film-forming foam fire extinguishing agents. In this study, mixed surfactant systems containing the short-chain fluorocarbon surfactant perfluorohexanoic acid (PFHXA) and the hydrocarbon surfactant sodium dodecyl sulfate (SDS) were investigated by molecular dynamics simulation to investigate the microscopic properties at the air/water interface at different molar ratios. Some representative parameters, such as surface tension, degree of order, density distribution, radial distribution function, number of hydrogen bonds, and solvent-accessible surface area, were calculated. Molecular dynamics simulations show that compared with a single type of surfactant, mixtures of surfactants provide superior performance in improving the interfacial properties of the gas-liquid interface. A dense monolayer film is formed by the strong synergistic impact of the two surfactants. Compared to the pure SDS system, the addition of PFHXA caused SDS to be more vertically oriented at the air/water interface with a reduced tilt angle, and a more ordered structure of the mixed surfactants was observed. Hydrogen bonding between SDS headgroups and water molecules is enhanced with the increasing PFHXA. The surface activity is arranged in the following order: PFHXA/SDS = 1:1 > PFHXA/SDS = 3:1 > PFHXA/SDS = 1:3. These results indicate that a degree of synergistic relationship exists between PFHXA and SDS at the air/water interface.

Protolytic properties of methyl yellow both in water-ethanol medium and in hardened gelatin gel with the presence of sodium dodecylsulphate and tetrabutylammonium chloride

This paper presents the results of studying the acid-base properties of the indicator dye methyl yellow in water–ethanol solutions with a volume fraction of alcohol of 10 % and 50 %. The influence of the addition of NaCl salts and tetrabutylammonium chloride, as well as the anionic surfactant sodium dodecylsulfate (SDS) on the acidity constant of the indicator, was evaluated. Under the chosen conditions, ethanol additives have a more significant effect on the pKa value. For the first time, using the dynamic light scattering method, the particle sizes, polydispersity index, and ζ-potential of colloidal particles in pure aqueous and mixed water–ethanol solutions of methyl yellow (φalcohol from 0.2 % to 50 %) in the presence of NaCl and SDS were estimated. In solutions with φalcohol = 50 % colloidal particles were not found. It has been shown that the hardened gelatin gel of photographic film can be used as a convenient sorbent for methyl yellow. In the process of dye extraction into a gelatin film from water-alcohol solutions containing SDS and NaCl, the acid-base properties of the methyl yellow remained almost unchanged. The difference between the pKa values obtained for the indicator both in solution and in the film did not exceed the measurement error.

Bubble size distribution and turbulence characterization in a bubbly flow in the presence of surfactant

This study aimed to quantify the less explored complex multiphase hydrodynamics of a bubble swarm in the presence of surfactant which is the key to flotation process widely used in the resources and environmental engineering applications.Experiments were conducted in a rectangular column (cross-section: 100 mm × 100 mm) in batch mode by varying the gas flux (0.02 to and 0.08 cm/s) in the presence of an anionic surfactant sodium dodecyl sulphate (5 to 15 ppm). High-speed imaging was then used to visualise the unsteady bubble plume dispersion behaviour and estimate the bubble size distribution (BSD) which showed a reduction in the mean bubble size with the increasing gas flux and surfactant concentration.Next, particle image velocimetry (PIV) was utilised to measure the instantaneous velocity field which was used to determine the turbulence characteristics. It was shown that the bubble plume contributes to significant anisotropy in the flow field which increased in the higher surfactant concentration and gas flux cases. The energy containing turbulence length scale was characterized by the integral length scale, which was observed to increase linearly with both the gas flux and surfactant concentration. Also, the local turbulence energy dissipation rate exhibited a strong linear correlation with the bubble surface area flux parameter. In the presence of surfactant, the turbulence energy spectrum of the system exhibited a less steep slope in the inertial subrange regime compared to the Kolmogorov −5/3 slope. The spectrum also showed a leftward shift indicating energy addition to the larger turbulence length scales which was reflected in the formation of large recirculation zones around the bubble plume.

A comparison of chemical and biogenic surfactant mediated synthesis of ZnO/CuO: Highlighting the antimicrobial activity of the bio-functionalized metal oxide nanoparticles

This study presents a comparative account on synthesis and characterization of ZnO/CuO (ZC) nanostructures by exploiting the capping, stabilizing and reducing characteristics of the biogenic green surfactants (rhamnolipid and surfactin) vis-à-vis chemical surfactant (sodium dodecyl sulfate). The ZC material is characterized by various sophisticated analytical tools such as X-ray diffraction (XRD), spectroscopic, and microscopic methods. The optical studies reveal the bandgap energy of the pristine ZC to be 3.77 eV, which varies marginally for SDS@ZnO/CuO (3.65 eV), rhamnolipd@ZnO/CuO (3.69 eV) and surfactin@ZnO/CuO (3.75 eV). In addition, antibacterial activities of the prepared samples against two pathogenic bacteria, Micrococcus luteus (ATCC 4698) and Escherichia coli DH5α (CP026085) are investigated and the mode of action is demonstrated through the destabilization and disruption of the bacterial membranes and subsequent killing.

Ultrasonication‐assisted alkali treatment of hemp fibers to improve the fiber/matrix interface of hemp/epoxy composites: The influence of sodium dodecyl sulfate surfactant

AbstractAlkali pretreatment of fibers is an efficient technique to enhance fiber/matrix bonding in natural fiber composites. This study investigates if the addition of sodium dodecyl sulfate (SDS) surfactant increases the efficacy of alkali treatment of hemp fibers. SDS concentrations ranging between 2 and 10% wt/wt were used with a constant (10% wt/wt) NaOH concentration. Fiber surfaces were observed with scanning electron microscopy (SEM). Fiber surfaces were cleaner when SDS was used compared with alkali treatment with no SDS added indicating the elimination of substances such as lignin, waxes, hemicelluloses, and pectin. Fourier‐transform infrared spectroscopy and TGA studies also confirmed the removal of these substituents. Mechanical performance of the composites was evaluated via static and dynamic tests. The tensile strength and modulus improved 24.9% and 13.6% respectively with the addition of 10 wt% SDS. The flexural strength and modulus also showed an improvement of 22.4% and 26.3% respectively when 10 wt% SDS was added to alkali solution. Dynamic mechanical tests showed that the storage and loss modulus of the composites increase with SDS/alkali treatment. Results indicated that the use of SDS in alkali treatment notably improves the composite performance which is attributable to more efficient elimination of noncellulosic constituents from fiber structure.Highlights Sodium dodecyl sulfate (SDS) improves the efficacy of NaOH treatment of hemp. Removal of noncellulosic substances from fibers was facilitated by SDS. Ultrasound/SDS assisted alkalization of fibers improved composite properties.

Super capacity of ligand-engineered biochar for sorption of malachite green dye: key role of functional moieties and mesoporous structure.

This study synthesized a new thiomalic acid-modified rice husk biochar (TMA-BC) as a versatile and eco-friendly sorbent. After undergoing chemical treatments, the mercerized rice husk biochar (NaOH-BC) and TMA-BC samples showed higher BET surface area values of 277.1 m2/g and 305.8 m2/g, respectively, compared to the pristine biochar (BC) sample, which had a surface area of 234.2 m2/g. In batch adsorption experiments, it was found that the highest removal efficiency for malachite green (MG) was achieved with TMA-BC, reaching 96.4%, while NaOH-BC and BC exhibited removal efficiencies of 38.6% and 27.9%, respectively, at pH 8. The engineered TMA-BC exhibited a super adsorption capacity of 104.17mg/g for MG dye at pH 8.0 and 25°C with a dosage of 2g/L. The SEM, TEM, XPS, and FTIR spectroscopy analyses were performed to examine mesoporous features and successful TMA-BC carboxylic and thiol functional groups grafting on biochar. Electrostatic forces, such as π - π interactions, hydrogen bonding, and pore intrusion, were identified as key factors in the sorption of MG dye. As compared to single-solution adsorption experiments, the binary solution experiments performed at optimized dosages of undesired ions, such as humic acid, sodium dodecyl sulfate surfactant, NaCl, and NaSCN, reflected an increase in MG dye removal of 2.8%, 8.7%, 5.4%, and 12.7%, respectively, which was attributed to unique mesoporous features and grafted functional groups of TMA-BC. Furthermore, the TMA-BC showed promising reusability up to three cycles. Our study indicates that mediocre biochar modified with TMA can provide an eco-friendly and cost-effective alternative to commercially accessible adsorbents.

Molecular interaction of nonsteroidal anti‐inflammatory prodrug nepafenac with ionic surfactants

AbstractDrug‐surfactant interaction increases the solubility of poorly water‐soluble drugs and design better pharmaceutical formulations. The degree of interaction of nepafenac (NP), a nonsteroidal anti‐inflammatory prodrug was studied with ionic surfactant molecules such as cationic surfactant cetrytrimethyl ammonium bromide (CTAB) and anionic surfactant sodium dodecyl sulphate (SDS) in an aqueous medium at room temperature. NP made mixed micelles with CTAB and SDS. To investigate the influence of interactions, conductivity measurements, UV–visible spectroscopy, and fluorescence measurements were recorded. The quantification of NP–surfactant interactions was investigated using various mathematical models. The CMC values determined from conductivity measurements of pure surfactants were 0.96 mM for CTAB and 8.14 mM for SDS near to their literature values. At different mole fractions of NP in UV measurements, binding constants from lnKb were found 0.025 and 0.123 and number of NP molecules per micelles (n) 67, 46 for CTAB and SDS, respectively. The mixed micelles of NP–CTAB and NP–SDS revealed that CTAB has a strong interaction with NP than SDS. The Benesi–Hildebrand relationship, Stern–Volmer and Kawamura replica for the partition coefficient were used to confirm the findings. We are confident that the host–guest interaction mechanism can contribute to a better understanding of molecular recognition in the phospholipid membrane model.

Molecular simulation of the effect of anionic surfactant on methane diffusion in coal

Coal seam water injection is one of the important means of coal mine disaster prevention and control, which helps to reduce gas concentration. Anionic surfactants can change the hydrophilicity of coal to enhance the wetting effect of coal seam water injection and inhibit the diffusion of methane. However, the research on the effect of surfactants on the diffusion process of methane is still relatively weak. In order to explore the influence mechanism of anionic surfactant on coal surface wettability and methane diffusion from a microscopic point of view. Using wiser coal model and two commonly used anionic surfactants, sodium dodecyl benzene sulfonate (SDBS) and sodium dodecyl sulfate (SDS), the surfactant/water interface configuration, water/coal contact angle configuration and coal seam methane diffusion configuration were constructed. The interfacial stability of surfactant and water was discussed, and the wetting modification effect of surfactant on coal surface and the law of gas diffusion were analyzed. Finally, by studying the microscopic properties of each molecule in the simulation system, the adsorption mode of surfactants, the hydrophilicity of polar groups, the number of hydrogen bonds and the change of the pore volume in the coal seam system were analyzed, and the wetting modification mechanism of surfactants on coal surface and the inhibition effect of methane diffusion were discussed. The results show that with the increase of surfactant concentration, the interface formation energy is constantly enhanced, and the absolute value of electrostatic energy gradually increases, making the effect between surfactant and water stronger. The contact angle of coal surface under the action of SDS surfactant is the smallest, which is 36.230°, indicating that SDS surfactant has the best effect on the wettability of coal surface. The amount of methane diffusion in the surfactant action system decreased significantly compared with the pure water system, and the distribution of methane in the coal seam increased, indicating that the interaction between methane and coal is enhanced under the action of surfactant. With the increase of surfactant concentration, surfactant molecules are easier to spread on the surface of coal seam, and the wettability of coal surface increases. The research results can provide some research ideas and reference significance for anionic surfactants in the prevention and control of coal mine gas disasters.

Surfactant-based supramolecular dye assembly: A highly selective and economically viable platform for quantification of heparin antidote

Herein, we have employed a supramolecular assembly of a cationic dye, LDS-698 and a common surfactant sodium dodecyl sulfate (SDS) as a turn-on fluorescent sensor for protamine (Pr) detection. Addition of cationic Pr to the solution of dye-surfactant complex brings negatively charged SDS molecules together through strong electrostatic interaction, assisting aggregation of SDS way before its critical micellar concentration (CMC). These aggregates encapsulate the dye molecules within their hydrophobic region, arresting non-radiative decay channels of the excited dye. Thus, the LDS-698•SDS assembly displays substantial enhancement in fluorescence intensity that follows a nice linear trend with Pr concentration, providing limit of detection (LOD) for Pr as low as 3.84(±0.11) nM in buffer, 124.4(±6.7) nM in 1% human serum and 28.3(±0.5) nM in 100% human urine. Furthermore, high selectivity, low background signal, large stokes shift, and emission in the biologically favorable deep-red region make the studied assembly a promising platform for Pr sensing. As of our knowledge it is the first ever Pr sensory platform, using a very common surfactant (SDS), which is economically affordable and very easily available in the market. This innovative approach can replace the expensive, exotic and specialized chemicals considered for the purpose and thus showcase its potential in practical applications.

Montmorillonite pigment effects on the water barrier properties of paper coated with latexes synthesized through surfactant and Pickering emulsion methods

Pigments are often added to improve the barrier performance of dispersion coatings on paper, but they only are beneficial up to a limited pigment volume concentration (PVC). In this study, the use of montmorillonite (MMT) as pigment was explored in latex emulsions synthesized using surfactant and Pickering emulsion methods to explore the origins of this limitation. MMT was used to synthesize dispersion coatings for paper consisting of poly(styrene-co-butylacrylate) latex and compared with those synthesized using sodium dodecyl sulfate (SDS) surfactant. The Pickering, surfactant, and commercial coating systems with MMT decreased the water vapor transmission rate (WVTR), reaching minimum values at 1.2 %, 2 %, and 0.4 % PVC, respectively. At higher PVC values, the WVTR of all systems increased, which was attributed to the MMT pigments creating pathways for water transport. Moreover, similar pore volumes were found in all the latex films, indicating that the decrease in barrier properties as PVC increased was not caused by pore generation. The hydrophilicity of the MMT pigment was found to contribute to the observed minimum and lower barrier properties with increasing PVC. This work demonstrates that addition of pigments to the latex can be beneficial to improve paper barrier properties up to a certain level beyond which the pigments form percolation networks along the interfaces between MMT and the polymer, reducing the barrier properties.

Challenging electroanalytical method for the determination of mirabegron in biological samples and pharmaceutical formulations

A simple, economic, sensitive, and time-saving differential pulse voltammetric (DPV) procedure using nanostructured zinc oxide modified carbon paste electrode (nano ZnO-CPE) in conjunction with an anionic surfactant sodium dodecyl sulfate (SDS) was developed for ultra- sensitive detection of mirabegron (MIR), the most prescribed pharmaceutical drug in treatment of overactive bladder (OAB). The use of nanostructured zinc oxide CPE modifier increased the electrode active surface area as well as improved the process of electron transfer, also it was found that at optimal conditions MIR electrochemical process was both irreversible and diffusion-regulated. The morphological characterization of the fabricated electrode was performed using field emission scanning electron microscopy (FESEM) and energy-dispersive X-ray spectroscopy (EDX). MIR voltammetric behavior was investigated using Nano ZnO-CPE in different content and electrode compositions. Therefore, ultra-sensitive results were attained with a linearity range of (0.55 to 100.20 ng ml−1) and a low limit of detection (LOD) of 0.51 ng ml−1 and limit of quantification (LOQ) of 1.54 ng ml−1 in a 0.04 M Britton-Robinson (BR) buffer at an adjusted pH of 6.0 with scan rate 100 mV s−1. Furthermore, the proposed approach was successful in measuring MIR with acceptable percentage recoveries (99.81–100.11 %) in pharmaceutical dosage form and varying concentration ranges in biological samples (99.74–100.35 %). The proposed method has been validated using ICH criteria and proven to be accurate and repeatable.

Experimental study on heat transfer performance enhancement of pulsating heat pipes induced by surfactants

Pulsating heat pipe (PHP) is considered as a promising technique to address the thermal dissipation issues in micro-electronic devices, but its heat transfer performance needs to be further enhanced urgently. In this study, the PHP comprehensive performance experimental system was established. Then, the influence of surfactant sodium dodecyl sulfate (SDS) aqueous solution on the heat transfer performance of PHP was experimentally investigated and the visualization of PHP with surfactant was also accomplished. Additionally, based on Marangoni effect and surface tension, a comprehensive analysis was conducted on the impact mechanism of surfactants on PHP. The experimental results indicated that the oscillatory disturbance of the liquid slug inside the PHP is enhanced by the addition of SDS, and the resulting pressure imbalance and temperature difference enhance the directional flow of the working fluid. Meanwhile, under the operating conditions of 30 W working thermal power and the solution concentration of 0.001 wt%, the thermal resistance of PHP was reduced by 30.7 % compared with that of deionized water (DI water). This indicated that the working fluid with low concentration SDS could increase the area of liquid film and reduce the thermal resistance, which is induced by the surface tension and Marangoni effect due to the uneven distribution of surfactants. However, the thermal resistance of PHP with the SDS concentration of 0.2 wt% is higher than that of DI. This means that high concentration of SDS would deteriorate the startup characteristics and the heat transfer performance of PHP. Therefore, high concentrations of surfactants should be avoided from practical application of PHP.

Impact of the Amphoteric Nature of a Chelating Surfactant on its Interaction with an Anionic Surfactant: A Surface Tension and Neutron Reflectivity Study of Binary Mixed Solutions.

2-Dodecyldiethylenetriaminepentaacetic acid (C12-DTPA) is a chelating, amphoteric surfactant with a bulky headgroup containing eight pH-responsive groups. The hypothesis was that the amphoteric nature of the chelating surfactant would affect the interaction with another surfactant and, consequently, also the composition of mixed surface layers. Binary mixed monolayers of C12-DTPA and the anionic surfactant sodium dodecyl sulfate (SDS) were examined using neutron reflection and surface tension measurements. The experiments were conducted at pH 5, where the C12-DTPA monomers carried a net negative charge. Surface excess calculations at low total surfactant concentration revealed that the chelating surfactant dominated the surface composition. However, as the concentration was raised, the surface composition shifted toward an SDS-dominant state. This phenomenon was attributed to the increased ionic strength at increased concentrations, which altered the balance between competing entropic forces in the system. Interaction parameters for mixed monolayer formation were calculated, following a framework based on regular solution theory. In accordance with the hypothesis, the chelating surfactant's ability to modulate its charge and mitigate repulsive interactions in the surface layer resulted in favorable interactions between the anionic SDS and negatively charged C12-DTPA monomers. These interactions were found to be concentration-dependent, which was consistent with the observed shift in the surface layer composition.

A bifunctional Zn(II) coordination polymer for fluorescence recognition towards hazardous matters and its high adsorption removal of dye pollutant

In this work, a novel Zn(II) coordination polymer (denoted as Zn-CP) was constructed by the mixed ligands of 6-(3′,4′-Dicarboxy phenoxy)isophthalic acid (H4L) and 4,4′-bis(imidazolyl)biphenyl (bib) under solvothermal method. And based on the Zn-CP, the surfactant agent sodium dodecyl sulfate (SDS) was further introduced into the structure, thus obtaining the Zn-CP(S) which possessed the same phase but a smaller size compared with the Zn-CP. Interestingly, the Zn-CP(S) presented a significantly ameliorated fluorescent intensity, about 4.36 times higher than that of the Zn-CP prepared in the absence of SDS. Taking advantage of the improved fluorescence trait of the Zn-CP(S), a fluorescence recognition towards hazardous matters was further carried out. The results showed that Zn-CP(S) could simultaneously recognized for Hg2+, Cr2O72− and a broad range of hazard nitroaromatic explosives with the satisfactory limits of detection (LODs). In addition, Zn-CP could also be used as a recyclable adsorbent to remove methyl orange (MO) in aqueous medium. The maximum equilibrium adsorption capacity of Zn-CP for MO was 61.01 mg/g, and the adsorption mechanism could be attributed to the weak inter-molecular interaction involved π-π stacking and hydrogen bonding between Zn-CP and the MO molecule. Therefore, the bifunctional material has potential application prospects in fluorescence recognition and adsorption.

Designing an optimised formulation for in situ emulsion polymerization: printing ink production by response surface methodology

Purpose Toner is a crucial dry colorant composite used in printing based on the electrophotographic process. The quality of printed images is greatly influenced by the toner production method and material formulation. Chemically in situ polymerization methods are currently preferred. This paper aims to optimize the characteristics of a composite produced through emulsion polymerization using common raw materials for electrophotographic toner production. Design/methodology/approach Emulsion polymerization provides the possibility to optimize the physical and color properties of the final products. Response surface methodology (RSM) was used to optimize variables affecting particle size (PS), PS distribution (PSD), glass transition temperature (Tg°C), color properties (ΔE) and monomer conversion. Box–Behnken experimental design with three levels of styrene and butyl acrylate monomer ratios, carbon black pigment and sodium dodecyl sulfate surfactant was used for RSM optimization. Additionally, thermogravimetric analysis and surface morphology of composite particles were examined. Findings The results indicated that colorants with small PS, narrow PSDs, spherical shape morphology, acceptable thermal and color properties and a high percentage of conversion could be easily prepared by optimization of material parameters in this method. The anticipated outcome of the present inquiry holds promise as a guiding beacon toward the realization of electrographic toner of superior quality and exceptional efficacy, a vital factor for streamlined mass production. Originality/value To the best of the authors’ knowledge, for the first time, material parameters were evaluated to determine their impact on the characteristics of emulsion polymerized toner composites.

Study of Anti-Corrosion Properties of Sodium Dodecyl Sulphate and Cetyl Pyridinium Chloride

Surfactant is a surface-active agent. Surfactants have both hydrophilic (water-attracting) and hydrophobic (water-repelling) portions in their molecular structure, effective inhibitors for the protection of mild steel in an acidic medium, the weight loss methods were used at lab temperature to evaluate the effect of surfactant cetyl pyridinium chloride (CPC) and sodium dodecyl sulfate (SDS) on the corrosion protection behavior of Mild steel in 0.5 M H2SO4 solution. Inhibition efficiency, weight loss, corrosion rate, and surface coverage area of Mild steel in different concentrations of surfactant were studied. The results showed that the Inhibition efficiency of cetyl pyridinium chloride is 99.86%, which is greater than that of sodium dodecyl sulfate (99.85%) in the presence of 0.5 M H2SO4.

INFLUENCE OF POLYVINYL ALCOHOL ON THE STABILITY OF AQUEOUS DISPERSIONS OF NANODIAMONDS

The stability of aqueous dispersions of detonation nanodiamonds (ND) in the presence of polyvinyl alcohol (PVA) has been studied. It has been established that PVA additives with a concentration above 0.1 wt.% cause the formation of aggregates. To increase the stability of ND dispersions, it was proposed to add a stabilizer, an anionic surfactant sodium dodecyl sulfate (SDS), into the system. As a result of the simultaneous action of the SDS-PVA mixture, the aggregation stability of aqueous dispersions of ND increases markedly; the particle size in the dispersions does not change for several days.