Sludge Filterability Research Articles

Combined activated sludge and sand filtration for purification of UASB effluent with high suspended solids from water hyacinth juice

Rapid biogasification of water hyacinth, a globally overgrown species, using compression and up-flow anaerobic sludge blanket (UASB) treatment of the juice has recently been proposed. This study aimed to establish a post-purification system for UASB-treated juice to effectively utilize the remaining nutrients for valuable products, such as vegetables and microalgae. To easily remove hard-to-degrade suspended solids (SS) and organic matter from UASB-treated juice, the activated sludge (AS) and sand filtration processes—conventional biological treatments—were introduced, with a focus on their physical treatment properties. Over 76 % of SS and 43 % of the organic carbon were removed from UASB-treated juice during the process. The hydraulic retention time of the AS was reduced to one day, indicating the potential of minimizing the facility size. The light transmittance, which is crucial for microalgae mediums, improved sevenfold. Even after most of the SS was removed by the AS, the sand filtration further increased the light transmittance by 1.4 times. The AS effectively removed most of the SS and organic matter, whereas sand filtration enhanced the treatment stability and further improved the light transmittance. NH4+ was mostly oxidized to NO3-, which is less toxic to plants. The total inorganic nitrogen content remained high after treatment, suggesting that UASB effluents from water hyacinth can be used as a nutrient source for hydroponics and microalgae cultivation in developing countries.

Plant-Based Flocculants as Sustainable Conditioners for Enhanced Sewage Sludge Dewatering

With the aim to establish clean and sustainable sludge treatment, green conditioning using natural flocculants has recently gained a growing interest. In this study, a variety of plant materials, namely Moringa (Moringa oleifera) seeds, Fenugreek (Trigonella foenum-graecum) seeds, Potato (Solanum tuberosum) peels, Aloe (Aloe vera) leaves, Cactus (Opuntia ficus indica) cladodes, and Phragmites (Phragmites australis) stems, were evaluated for their potential bioflocculant activity in conditioning sewage sludge. They were thoroughly characterized to determine their active flocculating compounds. Sludge dewaterability was evaluated by assessing various sludge parameters, including specific resistance to filtration (SRF), dryness of filtration cake (DC), and total suspended solid removal (TSS) from sludge filtrate. The collected results from various physicochemical characterizations of plant materials suggest that the main flocculating agents are carbohydrates in Cactus and Fenugreek and proteins in Moringa, Potato, and Phragmites. Additionally, all tested plant-based flocculants demonstrated effective dewatering performance. Interestingly, compared to the chemical flocculant polyaluminum chloride, Moringa and Cactus showed superior conditioning effects, yielding the lowest SRF values and the highest DC. As a result, the use of these natural flocculants improved sewage sludge filterability, leading to a significant removal of total suspended solids from the filtrate. The conditioning properties of Moringa and Cactus can be attributed to their high protein and sugar content, which facilitates the effective separation of bound water from solids through charge neutralization and bridging mechanisms. Thus, green conditioning using plant-based flocculants, particularly Moringa and Cactus materials, presents a promising and eco-friendly approach to enhance sewage sludge dewatering for safer disposal and valorization.

Persistence evaluation of fecal pollution indicators in dewatered sludge and dewatering filtrate of municipal sewage sludge: The impacts of ambient temperature and conditioning treatments

Sludge resource utilization is one of the important routines for transmitting fecal pollution to water and soil, and sludge dewatering is a crucial step for sludge resource utilization. However, it remains unclear the decay characteristics and persistence of fecal pollution indicators after sludge dewatering. In this study, the persistence of six fecal pollution indicators, namely E. coli (EC), human-specific HF183 Bacteroides (HF183), human adenovirus (HAdV), human JC and BK polyomavirus (JCPyV and BKPyV), and crAssphage, in dewatered sludge cake and dewatering filtrate deriving from raw sewage sludge, as well as three types of sludge conditioned with polyacrylamide (PAM), Fenton's reagent, or Fe[III] and CaO were analyzed. The quantitative polymerase chain reaction (qPCR) and viability-qPCR methods were used to analyze the variation in abundances and infectivity of fecal pollution indicators in dewatered sludge cake or dewatering filtrate over the storage time, respectively. Decay predications of fecal pollution indicators over time were modeled using either the first-order or the biphasic decay model. The qPCR results revealed that fecal pollution indicators in dewatered sludge cake persisted longer than those in dewatering filtrate at the same temperature. Increasing temperature can accelerate the decay of fecal pollution indicators in both dewatered sludge cake and dewatering filtrate. Notably, sludge conditioning treatment may prolong the persistence of fecal pollution indicators in both dewatered sludge cake and dewatering filtrate. Viability-qPCR results indicated that the fecal pollution indicators (except HAdV) in dewatered sludge cakes deriving from both raw sewage sludge and conditioned sludges remained infectious for up to 30 days. After a storage period of 40 days, the abundances of fecal pollution indicators (except for EC) in sludge conditioned with Fenton's reagent were effectively decreased and meanwhile the infectivity of EC was reduced, exhibiting the lowest levels of fecal pollution. Therefore, both ambient temperature and conditioning treatment greatly impacted the decay characteristics and persistence of fecal pollution indicators in dewatered sludge cake and dewatering filtrate, and selecting suitable conditioning method can minimize environmental risks associated with fecal pollution in sewage sludge.

The interaction between sludge and microplastics during thermal hydrolysis of sludge

In municipal wastewater treatment plants (WWTPs), large number of microplastics (MPs) accumulated in wastewater migrated into sludge. Thermal hydrolysis of sludge (THS) was one of the most promising processes for promoting changes in molecular structure of MPs. The physicochemical properties and degradative pathways of polyethylene (PE) and polyethylene terephthalate (PET) in THS under different temperatures were studied in this paper. It was found that there was a mutual promotion relationship between sludge degradation and MPs aging. The presence of PE and PET MPs not only increased organics and nitrogen concentrations of sludge filtrate, but also enhanced the transformation of organics like proteins. Sludge accelerated the aging of PE and PET MPs. The friability of PE and PET MPs was increased with more surface fragmentation and breakage under the temperature of 120 ℃−180 ℃. Moreover, PE and PET MPs occurred thermal oxidation and reduction reactions with significant chemical structure changes at 160 °C and 140 °C, respectively. Pristine PE and PET had multiple carbon and oxygen active sites. During THS reaction, not only PE and PET reacted hydrolysis/decomposition to produce short-chain hydroxyl-terminated compounds, but also hydrothermal shear broke the polymer molecules and formed carboxyl-terminated and olefin-terminated low-carbon chains. This study provided some promising sign for in situ microplastic removal during sludge treatments.

Combination of a membrane bioreactor with a rotating biological contactor holding several diverse metazoans can reduce excess sludge with fouling mitigation

In a membrane bioreactor (MBR) system, in situ sludge reduction techniques induce membrane fouling. To address this challenge, we incorporated a rotating mesh carrier, which can adsorb organic matter and provide a habitat for metazoans, into the anoxic tank of a conventional anoxic/oxic-MBR (A/O-MBR) system, termed rotating biological contactor-MBR (RBC-MBR), and evaluated treatment performance. Over 151 days, lab-scale RBC-MBR and A/O-MBR were used to treat municipal sewage. Both reactors showed similar COD and NH4+ removal rates. However, RBC-MBR reduced excess sludge by approximately 45 % compared with A/O-MBR. Microscopic observation and 18S rRNA gene-based microbial analysis revealed the persistence of microfauna and metazoans (oligochaetes, nematodes, and rotifers) in RBC, which are typically absent in activated sludge. Additionally, the metazoan's population in the RBC-MBR membrane tank was two-fold that of A/O-MBR, indicating enhanced sludge reduction through predation. Despite these reductions, the increase in transmembrane pressure was similar between RBC-MBR and A/O-MBR, suggesting that sludge holding by RBC mesh media degrade fouling substances, such as proteins and polysaccharides and improves sludge filterability, resulting in membrane fouling mitigation. Microbial communities in both reactors were similar, indicating that the installation of RBC did not alter the microbial community of sludge. Network analysis suggested potential symbiotic or prey–predator relationships between bacteria and metazoans. This study reveals that RBC-MBR effectively reduced the excess sludge while mitigating membrane fouling, highlighting one of the promising technology for applying metazoan predation into MBR.

Insight into simultaneously sludge dewatering and antiviral drugs removal by integrated particle electrodes assisted electrochemical oxidation

Given the widespread occurrence of pandemic influenza, antiviral drugs (ATVs) as emerging pollutants which are ubiquitously present in wastewater and become concentrated in sewage sludge (SS). Therefore, achieving the simultaneous elimination of ATVs during sludge dewatering holds significant importance. Herein, six representative ATVs including amantadine, rimantadine, memantine hydrochloride, imiquimod, oseltamivir, and morpholidine were detected in sewage sludge. Their partitioning between solid and liquid phases was also examined under simultaneous sludge conditioning by particle electrodes-assisted electrochemical process (3D-SAC). The findings indicated that 3D-SAC significantly enhanced sludge dewaterability, achieving a moisture content reduction to 64.22 %. The total removal rates of the six ATVs ranged from 17.97 % to 66.22 %, closely associated with the degree of sludge cells cracking. Sludge lysis resulted in the destruction of protein-like EPS structures, exposing hydrophobic bonding sites, finally releasing more bonded water and ATVs into filtrate. The ·OH induced hydroxylation, backbone cleavage, and ring-opening of ATVs occurred concurrently as the sludge flocs disrupted and structural transformed. Environmental risk assessment revealed that the ecological risks and potential toxicity associated with the sludge filtrate were significantly diminished following electrochemical conditioning (EC). This process achieved the dual objectives of contaminant degradation and enhanced sludge dewatering.

A novel coupling process to replace the traditional multi-stage anammox process-sulfur autotrophic denitrification coupled anammox system.

A novel coupling process to replace the traditional multi-stage anammox process-sulfur autotrophic denitrification (SAD) coupled anaerobic ammonium oxidation (anammox) system was designed, which solved problems of nitrate produced in anammox process and low nitrate conversion rate caused by nitrite accumulation in SAD process. Different filter structures (SAD filter and anammox granular sludge) were investigated to further explore the excellent performance of the novel integrated reactor. The results of sequential batch experiments indicated that nitrite accumulation occurred during SAD, which inhibited the conversion of nitrate to dinitrogen gas. When SAD filter and anammox granular sludge were added to packed bed reactor simultaneously, the nitrate removal rate increased by 37.21% and effluent nitrite concentration decreased by 100% compared to that achieved using SAD. The stratified filter structure solved groove flow. Different proportion influence of SAD filter and anammox granular sludge on the stratified filter structure was evaluated. More suitable ratio of SAD filter to anammox granular sludge was 2:1. Proteobacteria (57.26%), Bacteroidetes (20.12%) and Chloroflexi (9.95%) were the main phyla. The dominant genera of denitrification functional bacteria were Thiobacillus (39.80%), Chlorobaculum (3.99%), norank_f_PHOs-HE36 (2.90%) and Ignavibacterium (2.64%). The dominant genus of anammox bacterium was Candidatus_Kuenenia (3.05%).

Unravelling the impact of oxic-settling-anaerobic cycle implementation and solid retention time on sludge generation, membrane operation, and contaminant removal in membrane bioreactors

Sewage sludge production represents a critical issue nowadays. The oxic-settling-anaerobic (OSA) system is a promising strategy for reducing sludge production during biological wastewater treatment. However, the distinct effect of OSA process and solid retention time (SRT) on sludge production has not been clarified yet. Therefore, during this study, the impacts of OSA system implementation at different SRT on sludge generation, membrane operation, and contaminant removal were elucidated in two lab-scale membrane bioreactors working at 20 d (MBR20) and 60 d (MBR60). After OSA implementation, the MBR-OSA20 and MBR-OSA60 were operated at a hydraulic retention time in the sludge holding tank (HRTSHT) of 6–12 h and of 6–24 h, respectively. The estimated observed sludge yield (Yobs) showed a reduction of 38–48 % for the MBR-OSA20, but no beneficial effect was observed for MBR-OSA60 at 6 h of HRTSHT. At the HRTSHT of 24 h, Yobs decreased by 17 % due to hydrolysis and acidogenic biomass fermentation. OSA implementation and long SRT had no negative effects on organic carbon and ammonium removal (96(±3) % and 100 %, respectively) and improved total nitrogen (TN) reduction by 19–41 %. Membrane fouling and sludge filterability were not significantly affected, whereas sludge settleability worsened after the implementation of the OSA cycle. This activity provided additional insights about the distinct impact of the OSA process and SRT on sludge production and characteristics, confirming the OSA process as a valid solution for reducing sludge production under a moderate SRT, but revealing a negligible effect on Yobs under a prolonged SRT and a short HRTSHT.

Enhanced sludge dewatering using a novel synergistic iron/peroxymonosulfate-polyacrylamide method

In the sludge dewatering process, a formidable challenge arises due to the robust interactions between extracellular polymeric substances (EPS) and bound water. This study introduces a novel, synergistic conditioning method that combines iron (Fe2+)/peroxymonosulfate (PMS) and polyacrylamide (PAM) to significantly enhance sludge dewatering efficiency. The application of the Fe2+/PMS-PAM conditioning method led to a substantial reduction in specific filtration resistance (SFR) by 82.75% and capillary suction time (CST) by 80.44%, marking a considerable improvement in dewatering performance. Comprehensive analyses revealed that pre-oxidation with Fe2+/PMS in the Fe2+/PMS-PAM process effectively degraded EPS, facilitating the release of bound water. Subsequently, PAM enhanced the flocculation of fine sludge particles resulting from the advanced oxidation processes (AOPs). Furthermore, analysis based on the Extended Derjaguin-Landau-Verwey-Overbeek (XDLVO) theory demonstrated shifts in interaction energies, highlighting the breakdown of energy barriers within the sludge and a transition in surface characteristics from hydrophilic (3.79 mJ m−2) to hydrophobic (−61.86 mJ m−2). This shift promoted the spontaneous aggregation of sludge particles. The innovative use of the Flory-Huggins theory provided insights into the sludge filtration mechanism from a chemical potential perspective, linking these changes to SFR. The introduction of Fe2+/PMS-PAM conditioning disrupted the uniformity of the EPS-formed gel layer, significantly reducing the chemical potential difference between the permeate and the water in the gel layer, leading to a lower SFR and enhanced dewatering performance. This thermodynamic approach significantly enhances our understanding of sludge dewatering and conditioning. These findings represent a paradigm shift, offering innovative strategies for sludge treatment and expanding our comprehension of dewatering and conditioning techniques.

COMPLEX TITANIUM-CONTAINING REAGENTS IN WASTEWATER TREATMENT PROCESSES OF THE FISHING INDUSTRY

The issues of removing nutrients from wastewater from various industries have recently received more and more attention. Traditional coagulants based on aluminum and iron salts can effectively remove phosphate ions from water, but these reagents are not effective against ammonium ions. As part of the work done, the possibility of using complex titanium-containing coagulants in the processes of dephosphatization of wastewater from the fish processing industry was considered. It has been proven that the use of magnesium titanium reagents makes it possible to carry out the coprecipitation of ammonium and phosphate ions in the form of the complex compound of magnesium ammonium phosphate (struvite) with high efficiency. To implement the purification process, a 10–20% stoichiometric excess of magnesium compounds from the calculated value is required, while the efficiency of precipitation of ammonium compounds exceeds 50%, and phosphate anion 95%. The optimal pH range for the process of coprecipitation of ammonium and phosphate ions in the form of a complex compound is 10.0 – 10.5. The results of studies conducted on real water from a fish processing plant demonstrated the increased efficiency of complex titanium-containing reagents compared to traditional coagulants based on aluminum, iron and magnesium salts. The possibility of using magnesium-containing waste from the production of refractory materials has been established both as a precursor for the production of complex coagulants and as an individual reagent. It has been proven that the use of complex titanium-containing reagents makes it possible to significantly intensify the processes of sedimentation (15%) and filtration (20%) of coagulation sludge. The use of complex reagents will significantly increase the level of environmental safety of production and reduce the anthropogenic load on the hydrosphere. For citation: Kuzin E.N. Complex titanium-containing reagents in wastewater treatment processes of the fishing industry. ChemChemTech [Izv. Vyssh. Uchebn. Zaved. Khim. Khim. Tekhnol.]. 2024. V. 67. N 7. P. 127-135. DOI: 10.6060/ivkkt.20246707.6997.

Synergistic coupling of flocculation and fenton reaction for enhanced sludge dewatering: Pivotal role of bi-functional cationic tannin

The challenges associated with sludge dewatering are primarily attributed to the rigid structure formed through the combination of sludge extracellular polymeric substances (EPS) and bound water. Although Fenton oxidation can effectively break down sludge EPS, it faces several challenges including the tough reduction of Fe3+ and the need for large quantities of reagents. In this study, we prepared a cationic tannin (CT) that performed well in flocculation, while also serving as an effective Fe3+ reducing agent due to its phenolic hydroxyl structure. A novel synergistic process coupling CT and the Fenton reaction, integrating flocculation and oxidation, was established for sludge conditioning and dehydration. This system exhibited superior sludge dewatering performance compared to the individual addition of CT or Fenton oxidation under similar conditions. The specific resistance filtration (SRF) of sludge decreased to 22 × 1011m/kg, and the moisture content of the sludge cake decreased to 63.7%. The observed compositional and secondary structural changes in each layer of the sludge’s EPS further confirm the enhanced efficiency of EPS breakdown and bound water release. Following the conditioning process, the sludge filtrate and mud cake met the necessary discharge requirements and could be further treated and utilized as valuable resources in subsequent processes. Additionally, the cost of the system was obviously lower than that of conventional Fenton reaction. This study proposes the use of CT as a bi-functional material, possessing both flocculation and reduction capabilities. By combining CT with the Fenton reaction, we developed an economical and efficient deep sludge dewatering technology.

Enhanced anaerobic digestion performance and sludge filterability by membrane microaeration for anaerobic membrane bioreactor application

Slow dissolution/hydrolysis of insoluble/macromolecular organics and poor sludge filterability restrict the application potential of anaerobic membrane bioreactor (AnMBR). Bubble-free membrane microaeration was firstly proposed to overcome these obstacles in this study. The batch anaerobic digestion tests feeding insoluble starch and soluble peptone with and without microaeration showed that microaeration led to a 65.7–144.8% increase in methane production and increased critical flux of microfiltration membrane via driving the formation of large sludge flocs and the resultant improvement of sludge settleability. The metagenomic and bioinformatic analyses showed that microaeration significantly enriched the functional genes and bacteria for polysaccharide and protein hydrolysis, microaeration showed little negative effects on the functional genes involved in anaerobic metabolisms, and substrate transfer from starch to peptone significantly affected the functional genes and microbial community. This study demonstrates the dual synergism of microaeration to enhance the dissolution/hydrolysis/acidification of insoluble/macromolecular organics and sludge filterability for AnMBR application.

Synergetic conditioning via oxalic acid enhanced Fe2+/CaO2 and skeleton construct to achieve deep dewatering of sewage sludge

Extracellular polymeric substance (EPS) with highly hydrophilic groups and sludge with high compressibility are determined sludge dewaterability. Herein, Fe2+ catalyzed calcium peroxide (CaO2) assisted by oxalic acid (OA) Fenton-like process combined with coal slime was applied to improve sludge dewaterability. Results demonstrated that the sludge treated by 0.45/1/1.1-OA/Fe2+/CaO2 mM/g DS, the water content (WC), specific resistance to filtration and capillary suction time dropped to 53.01%, 24.3 s and 1.2 × 1012 m/kg, respectively. Under coal slime ratio as 0.6, WC and compressibility were further reduced to 42.72% and 0.66, respectively. The hydroxyl radicals generated by OA/Fe2+/CaO2 under near-neutral pH layer by layer collapsed EPS, resulting in the degradation and migration of inner releasing components and the exposure of inner sludge flocs skeleton. The hydrophilic tryptophan-like protein of TB-EPS were degraded into aromatic protein of S-EPS and exposed inner hydrophobic sites. The protein secondary structures were transformed by destroying hydrophilic functional groups, which were attributed to the reducing α-helix ratio and reconstructing β-sheet. Moreover, coal slime as the skeleton builder lowered compressibility and formed more macropores to increase the filterability of pre-oxidized sludge for the higher intensity of rigid substances. This study deepened the understanding of OA enhanced Fenton-like system effects on sludge dewaterability and proposed a cost-effective and synergistic waste treatment strategy in sludge dewatering.

The application of chitosan quaternary ammonium salt to replace polymeric aluminum ferric chloride for sewage sludge dewatering

Inorganic coagulants such as poly aluminum ferric chloride (Al/Fe) are applied conventionally to sewage sludge dewatering and can be retained in the sludge cake, causing its conductivity to increase and generate secondary pollution. To reduce these disadvantages, there is a need to develop alternative, more sustainable chemicals as substitutes for conventional inorganic coagulants. In the present investigation, the application of a polymeric chitosan quaternary ammonium salt (CQAS) is explored as a complete, or partial, replacement for Al/Fe in the context of sludge dewatering processes. Laboratory experiments using digested sewage sludge showed that CQAS could effectively substitute for over 80 % of the Al/Fe inorganic coagulant in the sludge dewatering process. This substitution resulted in a reduction of sludge cake conductivity by more than 50 %. Simulation of sludge dewatering curves and imaging of the sludge surface indicated that the addition of CQAS led to an increase in nanosized pores, and a decrease in the specific resistance of the sludge filter cake as the dosage of Al/Fe decreased to around 30 %. The variations of fluorescence emission, quantum yield and carboxylic and amino groups, suggested that the chelating of Al/Fe decreased due to the bridging effects of CQAS. The CQAS had different flocculation bridging effects on various EPS fractions, which varied the amount of protein chelated with Al/Fe in each fraction. This study provides new information about the benefits of replacing conventional inorganic coagulants with natural organic polymers for sewage sludge dewatering, in terms of reduced sludge cake conductivity and greater dry solids content.

Phosphorus recovery from sewage sludge via Mg-air battery system

A pressing issue in contemporary society is the resource scarcity of phosphorus. Operating on the principle of electrochemical reactions between Mg as the anode and oxygen from air as the cathode, Mg-air batteries (MAB) have been employed to provide new prospects for phosphorus recovery in struvite form. Different phosphorus concentrations and reaction time impact struvite generation in MAB systems; however, the exact mechanism has rarely been investigated. We investigated how varying the initial phosphorus concentration and the reaction time affects phosphorus recovery, electricity generation, and the efficiency of struvite production in MAB. Additionally, we examine the impact of solid carbon sources on phosphorus transformation in sludge. The findings revealed that the incorporation of solid carbon sources facilitated the release of phosphate by changing phosphorus speciation. The electrolyte derived from the conditioned sludge filtrate exhibited a remarkable phosphorus removal efficiency of 91.7 % within 1 h, yielding the highest struvite purity of ∼70 %, whereas that using raw sludge filtrate or extending the reaction time was found to be less effective, even reducing struvite formation. Furthermore, different electrolytes influence the system's ability to passivate anode, and electrolytes with higher phosphorus concentrations have better electricity production performance. The results by Visual MINTEQ model confirmed that longer reaction times and lower initial phosphorus concentrations can negatively affect struvite formation by introducing Mg3(PO4)2 and Mg(OH)2. The integration of agricultural waste as carbon sources with MAB for phosphorus recovery represents a potential methodology for struvite recuperation from sewage sludge, thereby heralding a sustainable strategy for resource recovery.

Accounting for the microbial assembly of each process in wastewater treatment plants (WWTPs): study of four WWTPs receiving similar influent streams.

We evaluated a unique model in which four full-scale wastewater treatment plants (WWTPs) with the same treatment schematic and fed with similar influent wastewater were tracked over an 8-month period to determine whether the community assembly would differ in the activated sludge (AS) and sand filtration (SF) stages. For each WWTP, AS and SF achieved an average of 1-log10 (90%) and <0.02-log10 (5%) reduction of total cells, respectively. Despite the removal of cells, both AS and SF had a higher alpha and beta diversity compared to the influent microbial community. Using the Sloan neutral model, it was observed that AS and SF were individually dominated by different assembly processes. Specifically, microorganisms from influent to AS were predominantly determined by the selective niche process for all WWTPs, while the microbial community in the SF was relatively favored by a stochastic, random migration process, except two WWTPs. AS also contributed more to the final effluent microbial community compared with the SF. Given that each WWTP operates the AS independently and that there is a niche selection process driven mainly by the chemical oxygen demand concentration, operational taxonomic units unique to each of the WWTPs were also identified. The findings from this study indicate that each WWTP has its distinct microbial signature and could be used for source-tracking purposes.IMPORTANCEThis study provided a novel concept that microorganisms follow a niche assembly in the activated sludge (AS) tank and that the AS contributed more than the sand filtration process toward the final microbial signature that is unique to each treatment plant. This observation highlights the importance of understanding the microbial community selected by the AS stage, which could contribute toward source-tracking the effluent from different wastewater treatment plants.

Chemical conditioning of aerobically digested sludge using polyelectrolytes with different charge densities

This research was carried out to evaluate the effects of different dosages (1.85–4.44 g kg−1 Ts−1) of three cationic polyelectrolytes with charge densities (CD) of 20%, 40%, and 60% on the dewatering properties of an aerobically digested sludge. The sludge was collected from the sludge processing line in a wastewater treatment plant in the city of Mashhad, Iran (MWWTP). To assess the sludge dewatering properties, parameters such as specific resistance to filtration, sludge cluster geometry, filtration rate, and filtrate turbidity and volume were measured. The experimental results were then compared with the effects of a reference polyelectrolyte that was used in the conditioning of the sludge in that treatment plant. The results indicated that the sludge samples treated with the polyelectrolyte of the highest CD matched better dewatering performance than the samples conditioned with the other two polyelectrolytes. This polyelectrolyte (60%CD) presented its best effects at the dosage of 4.07 g kg−1 Ts−1. With this dosage, its performance was similar to the performance of the reference polyelectrolyte at the dosage of 4.44 g kg−1 Ts−1.

The Influence of the Addition of Cement and Zeolite on the Increase in the Efficiency of Sewage Sludge Dewatering in the Pressure Filtration Process

The process of removing water from sewage sludge is particularly important due to its high content in the raw sludge. This translates into problems with the transport and storage of sediments. Additionally, high water content reduces the calorific value of the sludge. The methods for selecting the appropriate parameters for sewage sludge conditioning and filtration, based on the experimental data presented in this work, may allow for the optimization of sludge dewatering lines in small and large sewage treatment plants. The optimization of the dewatering process has a significant impact on the environmental and economic benefits, which consequently results in a decrease in the power costs of the devices used, flocculants, and sludge processing, and, above all, it contributes to the reduction in the negative impact on the environment. The use of mineral substances in the preparation of sewage sludge improves the effects of its dewatering in the pressure filtration process, as expressed in the obtained values of the final hydration and process efficiency. The use of polyelectrolytes alone significantly improves the effects of sewage sludge dewatering. In this work, the polyelectrolytes were supported by the addition of cement or zeolite. The conditioning of sewage sludge in combined methods using C-494 polyelectrolyte and minerals made it possible to reduce the compressibility coefficient to the range of 0.24–0.47 and, at the same time, to achieve the best results of sludge dewatering in the filtration process. The lowest hydration of 74.9% was achieved when polyelectrolyte and cement were added to the sludge, and this hydration was 6.5 percentage points lower compared to that of the non-filtered sludge.

Ameliorating tannery sludge dewaterability by disintegration of extracellular biopolymers with FeCl3-MnSO4/oxalic acid/sodium percarbonate: Spectroscopic profiling of dissolved organic matter in sludge filtrate

Effectual sludge dewatering techniques are strongly desired by industrial wastewater treatment plants. In this work, we scrutinised the efficacy of various Fenton based complex mediated processes like ferric chloride (FeCl3)/oxalic acid (OA)/sodium percarbonate (SPC) (FOS), FS (without OA), manganese sulphate (MnSO4)/oxalic acid (OA)/sodium percarbonate (SPC) (MOS) and MS (without OA) for which capillary suction time (CST) was attained as follows: MS (204 s) < MOS (180 s) & FS (180 s) < FOS (174 s) at pH 3. This implied the role of chelating agent (OA) in improving sludge dewaterability by disintegrating Extracellular Polymeric Substances (EPS) and releasing converted free water from the sludge flocs. FTIR results of sludge samples revealed the higher release of aromaticity after treatment process. Presence of aromatic carboxylate compounds were confirmed by GC–MS analysis. A detailed inquisition on the dissolved organic matter (DOM) of filtrate samples using 3DEEM fluorescence methods like second derivative Accumulative Fluorescence Emission (AFE), Fluorescence Regional Integration (FRI) and UV–Visible spectroscopic method like multipeak Gaussian fitting were performed that signified Microbial Soluble Products.

Unraveling synergistic mechanisms of polyacrylamide coagulation and Fe2+/CaO2 Fenton-like oxidation to enhance sludge dewatering

Enhancing sludge dewatering can effectively reduce the operational costs of wastewater treatment plants. In the present study, a synergistic process combining polyacrylamide (PAM) coagulation with Fe2+/CaO2 Fenton-like oxidation was proposed to improve the performance of sludge dewatering. The findings indicate that pre-addition of PAM before Fe2+/CaO2 treatment yielded superior dewatering performance, reducing the water content from 78.6% to 73.1% and the capillary suction time (CST) from 32.9 s to 19.5 s, respectively. Even with a CaO2 dosage of 62.5 mg/g DS, the ultimate pH of the filtrate remained near neutral, and effective dewatering performance was consistently attained. Results of particle size and zeta potential revealed that the addition of PAM enhanced the particle size by electric neutralization and bridging, thus accelerating sludge filtration. Furthermore, Fe2+/CaO2 facilitated the conversion of hydrophilic organic matter in tightly bound EPS (TB-EPS) to soluble EPS (SB-EPS) and loosely bound EPS (LB-EPS), and lysis of the sludge cells, contributing to a decrease in water content. Molecular analysis of EPS through Fourier-transform infrared spectroscopy (FT-IR) further elucidated the breakdown of hydrophilic functional groups by this combined method. Additionally, the changes of Fe2+, Fe3+, and H2O2 concentrations were investigated to explore the mechanism of enhanced sludge dewatering from a kinetic perspective. Ultimately, the concentration of typical heavy metals in the treated sludge sample significantly decreased, leading to a reduction in environmental risks. Overall, this study employed the safe and stable CaO2 as the source of H2O2, combined with Fe2+ to form a Fenton-like system. Meanwhile, PAM was utilized to flocculate the sludge firstly, and then Fe2+/CaO2 oxidation system was carried out to enhance sludge dewatering, which provided a promising sludge dewatering approach with potential applications.