Installation Site Research Articles

The imagined island: Colonialism and constructed remoteness on Diego Garcia

AbstractColonial powers have long used islands and island forms for imperial projects, including military bases, weapons testing, resource mining and migrant detention. In order to pursue these interests, colonial powers have often sought geographically remote sites, but they further rely on the construction of remoteness. This article reflects on the colonial construction of remoteness by analysing the case study of Diego Garcia. The militarised atoll of Diego Garcia is one in a chain of islands that make up the British Indian Ocean Territory, the last colony created by the British government. While Diego Garcia is now under British sovereign control, the island was brutally cleared of its Indigenous inhabitants to make way for a joint British‐American military base. By detailing the ways in which ‘remoteness’ has affected the Indigenous Chagossians, ‘war on terror’ detainees, asylum‐seekers and migrant workers, this article demonstrates how colonial powers deploy remoteness as a way of distancing groups deemed ‘other’ from rights. Additionally, colonial powers use ‘remoteness’ to paradoxically protect their own proximity to colonial interests, including geopolitically significant sites for military installations.

Socio-environmental and technical factors assessment of photovoltaic hydrogen production in Antofagasta, Chile

This study introduces a method for identifying territories ideal for establishing photovoltaic (PV) plants for green hydrogen (GH2) production in the Antofagasta region of northern Chile, a location celebrated for its outstanding solar energy potential. Assessing the viability of PV plant installation necessitates a balanced consideration of technical aspects and socio-environmental constraints, such as the proximity to areas of ecological importance and indigenous communities, to identify potential zones for solar and non-conventional renewable energy (NCRE)-based hydrogen production.To tackle this challenge, we propose a methodology that utilizes geospatial analysis, integrating Geographic Information System (GIS) tools with sensitivity analysis, to determine the most suitable sites for PV plant installation in the Antofagasta region. Our geospatial analysis employs the QGIS software to identify these optimal locations, while sensitivity analysis uses the Sørensen–Dice coefficient method to assess the similarity among chosen socio-environmental variables.Applying this methodology to the Antofagasta region reveals that a significant area within a 15 km radius of existing road networks and electrical substations is favorable for photovoltaic projects. Our sensitivity analysis further highlights the limiting effects of socio-environmental factors and their interactions. Moreover, our research finds that enlarging areas of socio-environmental importance could increase the total hydrogen production by about 10% per commune, indicating the impact of these factors on the potential for renewable energy production.

GIS-based floating offshore wind turbine installation site selection using fuzzy analytic hierarchy process in northeast Aegean Sea

The ever-increasing consumption of electrical energy due to increasing requirements arising in parallel with the developing technology forces manufactures and users to seek new and environmentally compatible energy resources. Due to it endless energy potential and continuity, wind energy, which has been used by humanity for various purposes for centuries, continues its journey, which started with windmills that transform one form of mechanical energy into another, with offshore wind energy turbines. In this study, installation site selection, which is the first step for floating offshore wind turbine installation, is carried out. First, a Fuzzy Analytic Hierarchy Process (F-AHP) is applied to obtain the weights of criteria. Transformed alternatives and criteria in a fuzzy decision matrix through triangular fuzzy numbers are used to obtain a database via a Geographic Information System (GIS). Finally, the installation site and study area are determined. This area is located in the Northeast Aegean Sea, between Çanakkale and Gökçeada, 12 km to the northeast of Gökçeada, and 12 square kilometers. The minimum distance of the area to ship routes is 3000 m, and its minimum distance to fault lines is 2000 m. The average sea depth is 110 m, and the average wind speed is 9.26 m/s (18 knots). With this potential, enough energy can be generated for settlements on Gökçeada and the coastlines.

Распределение осевой и радиальной скорости вблизи с круглым раструбом в воздуховоде

The purpose of the article is to increase the energy efficiency of ventilation systems in mining enterprises using a round socket installed in the air duct. The article presents numerical and experimental results of studying the outlines of vortex zones formed at the installation site of a round bell. Numerical studies were carried out using the Ansys Fluent software package. We obtained graphical and analytical dependences of the distribution of the axial and radial components of the velocity near the bell, depending on its radius and angle of inclination

Demarcation of suitable site for solar photovoltaic power plant installation in Bangladesh using geospatial techniques

The major goal of this research is to adopt analytical hierarchy process (AHP) based geospatial technique to select suitable zone for the solar photovoltaic (PV) power plants. Nine thematic layers altogether—slope, global horizontal irradiation (GHI), relative humidity, direct normal irradiation (DNI), elevation, distance from major roads, distance from protected areas, rainfall, and land use/land cover (LULC)—are combined through overlay analysis in ArcGIS to create the final map of suitability for the placement of solar photovoltaic (PV) power plants in Bangladesh. This map has been classified into five categories namely, restricted zone, less suitable zone, moderate suitable zone, good suitable zone, and excellent suitable zone. These categories are covered by 7.28%, 16.61%, 28.51%, 27.77%, 21.83% land of total area in Bangladesh respectively. The findings of this research have been presented that ‘the excellent suitable’ and ‘good suitable’ areas for the construction of solar power plants are in the western and northwestern part (Rajshahi, Pabna, Sirajganj, Natore, Naogaon, Chapainawabganj, Bogura, Faridpur, Jessore, Jehenaidha, Magura, Kushtia, Choudanga, Meherpur) of the study area which contain a high value of global horizontal irradiation, direct normal irradiation, elevation and low value of slope, rainfall, temperature, relative humidity. Besides the restricted and less suitable zone for installing solar photovoltaic (PV) power plants indicates a high value of rainfall, slope, temperature, relative humidity and low value of global horizontal irradiation, direct normal irradiation, and elevation. Bangladesh's currently operational solar plants were taken into consideration for this study's validation purposes. The proposed framework may potentially be used in different locales on a national and worldwide scale. This study offers a consistent GIS process for the accurate, inexpensive implementation of a solar energy plan to achieve environmentally friendly goals.

Results of bone grafting using a xenogenic cortical plate BiOTECK

BACKGROUND: The fundamental condition that determines the effectiveness of treatment, with immediate and long-term positive results, is the amount of bone tissue in the jaws at the proposed implantation site. Defects in the dentition to a large extent and severe atrophy of the bone tissue of the jaws due to the loss of teeth significantly limit the use of dental implantation. It is reasonable to expand the indications for the use of dental implants in cases of atrophy of the jaw bone tissue in the installation site. This allows the optimization of surgical techniques aimed at increasing the volume of the jaw bone tissue, such as the use of new osteoplastic materials for guided bone regeneration.
 AIM: This study aimed to analyze the results of a jawbone graft using a BiOTECK xenogeneic cortical plate.
 MATERIALS AND METHODS: The test group consisted of 22 patients (11 men and 11 women) with jawbone atrophy. All patients underwent bone graft surgery using a BiOTECK xenogeneic cortical plate (BiOTECK, Italy).
 In the course of the study, all patients with jawbone loss underwent a dynamic clinical and X-ray examination during the following stages: during the dental implant surgery planning stage aimed at determining the volume of the bone tissue available and identifying the associated conditions and diseases (prior to conducting an osteoplastic procedure), prior to dental implant installation (6 months after osteoplastic surgery), and prior to the start of the orthopedic stage of treatment (12 months after osteoplastic surgery).
 RESULTS: The cone beam computed tomography data were analyzed and statistically processed to obtain the results. It was revealed that the values of the “bone densitometry” indicator increased 6 months after the bone graft using the BiOTECK xenogeneic cortical plate, and the values of the “densitometric density of jaw bone tissue” indicator increased.
 Immediately after bone grafting using the BiOTECK xenogeneic cortical plate, the thickness of the bone tissue of the upper jaw increased by an average of 5.0±0.1 mm and that of the lower jaw increased by an average of 3.9±0.1 mm. In the first stage of the dental implant surgery (6 months after osteoplastic procedure), due to resorption, the thickness of the bone tissue of the alveolar process of the upper jaw decreased by 1.1±0.1 mm and amounted to 6.8±0.1 mm (bone resorption rate: 13.9%), and the thickness of the bone tissue of the alveolar process of the lower jaw decreased by 0.8±0.2 mm and amounted to 6.6±0.3 mm (bone resorption rate: 10.3%).
 CONCLUSION: The clinical and X-ray results obtained 1 year after installing dental implants and performing bone graft surgery using the BiOTECK xenogeneic cortical plate indicate a stable volume of marginal bone tissue in the area of alveolar crest reconstruction.

Oil spill risk analysis for the NEOM shoreline

A risk analysis is conducted considering an array of release sources located around the NEOM shoreline. The sources are selected close to the coast and in neighboring regions of high marine traffic. The evolution of oil spills released by these sources is simulated using the MOHID model, driven by validated, high-resolution met-ocean fields of the Red Sea. For each source, simulations are conducted over a 4-week period, starting from first, tenth and twentieth days of each month, covering five consecutive years. A total of 180 simulations are thus conducted for each source location, adequately reflecting the variability of met-ocean conditions in the region. The risk associated with each source is described in terms of amount of oil beached, and by the time required for the spilled oil to reach the NEOM coast, extending from the Gulf of Aqaba in the North to Duba in the South. To further characterize the impact of individual sources, a finer analysis is performed by segmenting the NEOM shoreline, based on important coastal development and installation sites. For each subregion, source and release event considered, a histogram of the amount of volume beached is generated, also classifying individual events in terms of the corresponding arrival times. In addition, for each subregion considered, an inverse analysis is conducted to identify regions of dependence of the cumulative risk, estimated using the collection of all sources and events considered. The transport of oil around the NEOM shorelines is promoted by chaotic circulations and northwest winds in summer, and a dominant cyclonic eddy in winter. Hence, spills originating from release sources located close to the NEOM shorelines are characterized by large monthly variations in arrival times, ranging from less than a week to more than 2 weeks. Similarly, large variations in the volume fraction of beached oil, ranging from less then 50% to more than 80% are reported. The results of this study provide key information regarding the location of dominant oil spill risk sources, the severity of the potential release events, as well as the time frames within which mitigation actions may need to deployed.

Geospatial Optimization of Location-Dependent Costs for Gravity Energy Storage Plants in a Mountainous Suburban Area: The Case of Fukuoka City, Japan

<p class="MsoNormal" style="margin-top: 10pt; text-align: justify;"><span lang="EN-US" style="font-size: 14pt; font-family: 'times new roman', times, serif;">Gravity Energy Storage (GES) systems are recently being considered as a viable solution for storing intermittent renewable energy power, specifically in high curtailment zones. While a few studies have analyzed the material costs of GES systems, there is a paucity of literature on analyzing the socioeconomic costs of GES systems. This study analyzes the location-dependent costs of GES plants using a multi-factor spatial parameterization model for evaluating the existence of a point of minimum cost in a suburban mountainous geography. A case study of 500x500 points in a 50x50km2 area in the suburban area of Fukuoka city in Japan is performed. It is found that the cost of material transportation and transmission is more dominant in determining the position of an optimal cost location than factors of excavation and land costs. The position of the minima is also related to the principal urban area in that the line connecting the Center Business District (CBD) and suburban flat areas (line 1) is where the potential minima lie. The intersection point of an orthogonal to the line connecting the CBD with a substation nearest to the flat area with line 1, is the potential zone of minima location. The findings of this study are critical for urban energy planners and reveals how socioeconomic cost factors can aid in geolocation a suitable GES installation site.</span></p>

Active Energy Meters Tested in Realistic Non-Sinusoidal Conditions Recorded on the Field and Reproduced in Laboratory

Metrological characterisation of static energy meters under realistic low power quality conditions is a basic requirement for proper grid control and fair energy billing. The paper reports about a new proposed methodology, where the meters are tested under conditions directly recorded at installation sites. The waveforms of voltages and currents are sampled using a portable instrument; they are reproduced in laboratory conditions with a phantom power generator, with a bandwidth covering up to the 40th harmonic. The recording site is a photovoltaic energy production facility, having a a nominal power of 50 kW, at the coupling section to the grid. These waveforms were then reproduced in the laboratory, and tested on different models of single- and three-phase commercial static energy meters; the models chosen represent both energy meters used by energy providers at the point of common-coupling, and also meters typically used for in-line monitoring by end users. The quantity of interest is the reading error of the measured energy, when tested with the conditions reproduced from the on-field measurements, in comparison with a reference meter. All tested energy meter models comply with the present international documentary standards, which require tests under low power quality conditions; nevertheless, there are models that show unacceptable errors (up to 25%) in the measurement of active energy when tested with the on-field recorded waveforms. This suggests that the standardised testing waveforms might, in some cases, be not fully representative of the actual conditions encountered in the field.

Improving and evaluating the performance of a real photovoltaic pumping system for agricultural irrigation purposes in a desert environment at Ghardaia, Algeria

Algeria has one of the highest solar resources in the world. The availability of this significant solar energy can make photovoltaic (PV) water pumping applications a very attractive solution for many uses, including irrigation of agricultural areas, village water supply and domestic uses. The cost of water pumped by a PV pumping system is directly linked to the efficiency and reliability of the different elements constituting the system and also to the solar irradiation available at the installation site. Consequently, it is necessary to improve the reliability and efficiency of the PV generator in order to extract the maximum possible power at all times in order to achieve the most reliable and economic operation. On a real well of 25 m height in desert and semi-arid climate at the Sebseb site, Ghardaïa, Algeria, a typical PV pumping system for irrigation purposes is studied and optimized using two conventionels methods, a P&O method and a incremental method.These methods are essentially based on the assessment of water needs to irrigate 70 palm trees, the data on solar irradiation and the average temperature for the studied site (Sebseb, Ghardaia).

Spatial multi-criteria decision analysis for site selection of wind power plants: a case study

ABSTRACT Site selection for wind power plant (WPP) installation is a complex process that includes not only technical requirements but also physical, economic, social, and environmental sanctions. This study was carried out to determine optimal sites for WPP installation within the borders of Çanakkale province using spatial multi-criteria decision analysis (MCDA). Within the scope of the study, sites with a high level of suitability where a WPP can be established were determined by the geographic information system (GIS) and the analytical hierarchy process (AHP). The results were examined in two ways: by excluding and not excluding forest areas. After creating the two separate suitability maps, the annual electrical power generation potential (GP) map of the study area was generated. The results show that for the case where the forest areas were excluded, 67.26% of the study area is restricted and 29.94% is highly suitable, and for the case where the forest areas were not excluded, 58.94% is restricted and 36.25% is highly suitable. The total GP value of the highly suitable sites is 104,061.61 GWh/year. When the locations of existing WPPs were examined for control purposes, it was seen that the majority of them were located inside the areas with high suitability and outside the non-installable areas, but some of them were established in forested areas.

The Potential of Hydro Energy as the Renewable Energy Alternatives in the Rural Area

Hydro energy systems are broadly used around the world as renewable energy. The concept of hydro energy becomes the major energy alternative for fulfilling the energy demand, especially in the remotes area. The type of micro-hydro power was the most applicable to meet electricity purposes. Micro hydropower system proposes an environment friendly used because of easy to operate and low operation cost, especially in the area which high water availability. This review paper focuses on the potential of hydro energy systems that are built in remote areas. This review revealed three types of hydropower systems, namely mini-hydropower, small hydro power, and micro hydro power. Out of these three types, micro hydro power can become the solution for electrification in remote areas. Micro hydro power installation was built with many types of technological approaches. Nevertheless, considering geographical purposes, the capacity of energy production, and sustainability of resources. Yet, several obstacles should be aware of such as power availability in remote areas. The technical issue and government support become the key to success in applying hydropower in the site of installation. Otherwise, conventional fossil fuel-based systems which are costly and unsustainable may require due to the operating system of micro-hydro power as well

Techno-economic analysis on optimizing the value of photovoltaic electricity in a high-latitude location

This study performs a techno-economic analysis of different photovoltaic (PV) systems suitable for detached houses in high-latitude locations and quantifies the key economic indicators affecting their competitiveness. Residential PV systems providing different temporal power production profiles are compared, accounting for the electricity price variations in the day-ahead market and the possibility of self-consuming the produced electricity. The procedure allows novel and comprehensive case study analysis that captures PV production, self-consumption, and dynamic electricity pricing, ultimately revealing the value of the produced PV electricity. This procedure is applied to a hundred case studies representing single-family houses with different PV systems, electricity load profiles, and electricity contracts. Vertical East-West mounted bifacial panels (VBPV) reached superior performance, with 9.1% higher overall production (with 2019 weather data) and 7.4%–10.9% higher economic value (with 2019 and 2022 electricity price data) for the produced PV electricity compared with monofacial PV. Thus, VBPV is an excellent choice for households economically, but the availability of suitable installation sites in the urban environment limits the possibility of its utilization. The economic value of PV electricity strongly correlates with self-consumed electricity due to avoided transmission fees and taxes, and a significant drop in total production causes only a minor reduction in value if the amount of self-consumed electricity remains similar. Thus, for a small-scale producer who orients the panels toward the East and the West instead of the South with a 45° tilt, the economic loss is significantly smaller (even as low as 12.6%) than the production loss (23.2%).

Inertia load reduction for loadoff during floating offshore wind turbine installation: Release decision and ballast control

High offshore installation costs are a significant factor limiting the competitiveness of offshore wind energy. One efficient installation approach for floating offshore wind turbines is to preassemble the tower, nacelle, and rotor onshore and perform a single lifting operation to mate the superstructure with the floating foundation at the installation site. It is heavy lifting, due to the weighty payload. At the end of the mating process, a loadoff operation is conducted to transfer the preassembly to the floating foundation. It results in a sudden change in total force acting on the vessel and causes substantial acceleration and potential damage to the mechanism in the onboard nacelles. The magnitude of acceleration of the onboard nacelles can vary greatly at different release instants. In this research, a simplified two-degrees-of-freedom (DOF) (heave and pitch) model is also proposed to account for the heavy lifting process and variable ballast tanks. The sudden payload transfer is approximated using a hyperbolic tangent function to guarantee continuity and differentiability. The loadoff operation consists of the decision-making and vessel-stabilizing phases. Based on the nonlinear model predictive control method, a payload-transfer time selector and anti-pitch ballast controller have been developed to achieve optimal release time decisions and stabilize the vessel after payload release, respectively. Six-DOF simulation results show that the proposed algorithms are capable to a satisfying level of robustness of deciding the optimal payload release time instant, as well as limiting the peak and mean acceleration magnitudes of the onboard nacelles after payload release. The decision-making and control strategies may promote the sustainable energy transformation by extending the operation window and reduce the installation costs.

Unravelling spatiotemporal patterns of solar photovoltaic plants development in China in the 21st century

Solar energy, as an environmentally sustainable power source, is gaining increasing popularity worldwide, driving a surge in the number of solar photovoltaic (PV) plants. China, which has a prominent role in this domain, requires continuous updates to its PV plant data for spatiotemporal analyses. However, there remains an absence of a comprehensive and timely dataset of PV plants across China, leaving PV installation dates and other crucial attributes for comprehensive analyses underexplored. This study leverages Sentinel-2 data as a primary source to propose an optimized deep learning approach for PV plant extraction in China. Statistical analyses of PV plant attributes, including its installation date, size, site slope, and site land cover, were implemented from multiple data sources. Comprehensive analyses were conducted to unravel their spatiotemporal development patterns in the 21st century. The results indicate that as of 2023, China boasts 4347 PV plants, collectively spanning 4146 km2, which are predominantly concentrated in Northwest and North China. 2016 and 2017 marked substantial growth in China’s PV plants, while other years exhibited stability. These plants exhibit the distinct spatial characteristics of installing smaller PV plants on flat terrain covered by vegetation or barren land. Over time, a notable trend in the installation of China’s PV plants has been the increasing preference for establishing larger ones in smooth terrain, with a focus on preventing damage to natural resources. The results reveal China’s optimization of PV plant site selection and construction strategies, aligning with global environmental goals and sustainable energy practices.

Penerapan Pompa Air Tenaga Surya Untuk Sarana Irigasi dan Edukasi Desa Wisata Widarapayung Wetan Cilacap

Widarapayung Wetan Village was designated as an innovation village by the Cilacap Regency Innovation Village Determination which is located in Binangun District, Cilacap Regency. The main potential of Widarapayung Wetan Village is in the tourism sector, such as Widarapayung Beach and the pioneering tourist village. The facilities that have been built and already exist in this pilot tourism village are an art performance stage, pavilion, gazebo, gamelan instruments, plantation land, and rice fields. One of the pioneering developments of tourist villages is the development of educational tourism. This community service activity applies appropriate technology by developing water pump technology for irrigating rice fields using solar energy. Apart from irrigating rice fields, this solar-powered water pump technology is also used for educational tourism at the Widarapayung Wetan tourism village pilot, especially in the field of utilizing new and renewable energy. The stages of work carried out included surveying the installation site, designing and manufacturing a solar water pump system, system installation at the installation site, operational trials of pumps, and operational training and pump maintenance. The result of this activity is a solar water pump system for irrigating rice fields with a capacity of 30 liters/minute.

Selection of Possible Installation Sites for Sour Cherry Refrigerated Containers and Estimation of Container Volumes to be Installed Using GIS Tools

The purpose of this study is to propose the selection of installation sites based on publicly available data and sour cherry refrigeration container specifications, as well as to estimate the number of containers to be installed at possible sites. Today's escalating fuel supply and fuel price extremes make it particularly important to develop a sensible logistics sub-solution in the complex process of production, harvesting, storage, processing and sales. We undertook to develop a geospatial system that can be built and operated economically, its data sources can be updated occasionally or even at regular intervals, it is suitable for producing other outputs with additional descriptive or spatial data.

Content Validity-Based Evaluation Criteria System for Siting Wind-Solar Plants

The spatial assessment criteria system for hybridizing renewable energy sources, such as hybrid solar-wind farms, is critical in selecting ideal installation sites that maximize benefits, reduce costs, protect the environment, and serve the community. However, a systematic approach to designing indicator systems is rarely used in relevant site selection studies. Therefore, the current paper attempts to present an inclusive framework based on content validity to create an effective criteria system for siting wind-solar plants. To this end, the criteria considered in the related literature are captured, and the top 10 frequent indicators are identified. The Delphi technique is used to subject commonly used factors to expert judgments. Other factors are considered according to expert recommendations. In this context, the assessment tool was a combination of questionnaires and interviews with experts from scientific backgrounds that reflect the measurement target. The item-level content validity index (I-CVI) is applied along with the modified Kappa statistic (k*) to analyze expert ratings and suggestions. The results demonstrate the superiority of 9 and 4 commonly used factors and the suggested factors, respectively. The 13 criteria have achieved high agreement among experts at I-CVIs ≥ 0.78 and k*s > 0.76. The conclusion can be drawn that the modified Kappa statistic used in this analysis has a more significant effect on eliminating irrelevant factors. The current methodology and consequences might pave the way for making informed decisions to locate wind and solar farms.

Performance of vertically mounted bifacial photovoltaics under the physical influence of low-rise residential environment in high-latitude locations

This study focuses on finding suitable installation sites for vertical bifacial photovoltaic (VBPV) panels in urban low-rise neighborhoods at high latitudes. The power production of east-west-oriented VBPV systems matches well with domestic electricity consumption profiles, increasing the self-consumption of PV electricity. Furthermore, PV electricity adds economic value by avoiding transmission fees and taxes. These systems are especially beneficial in high-latitude locations characterized by a low solar elevation angle. However, these low angles expose VBPV panels to a high risk of shading losses from their surroundings, and it is unknown how much shading limits the number of suitable installation sites. Here, environmental shading on VBPV panels is quantified for three low-rise residential neighborhoods in Helsinki, a high-latitude location, by comparing the specific yields (annual electricity production per kilowatt peak) of VBPV and monofacial PV (MPV) systems. The results showed that unshaded VBPV systems have a higher specific yield than their MPV counterparts. However, in densely built neighborhoods with tall trees, the lack of suitable installation sites for VBPV panels severely limits the peak power of these systems. Roof ridge VBPVs usually yield high production, while façade- and ground-mounted systems lose between 30% and 70% compared to roof ridge VBPV systems depending on their installation locations. South-oriented MPVs perform better than VBPVs on north-south-facing roofs, both in terms of specific yield and total annual production. Conversely, VBPVs installed on the ridges of unshaded roofs aligned closely with the north-south axis outperform MPVs on east- and west-facing roofs by 20%–30%.

Early dental implant failure associated with postoperative infection: A retrospective 21‐year study

AbstractAimThere are several causes related to early dental implant failure, and infection is one of the most common risk factors in the initial phase of osseointegration. The aim of this retrospective study was to evaluate early dental implant failure associated with postoperative infection and identify the factors associated with such failure.Materials and MethodsA retrospective study was conducted, and the main predictor variable was early dental implant failure. The main cause of failure was postoperative infection, including factors related to early loss due to infection, such as installation site, type of implant–abutment connection used and presence of previous bone graft. Appropriate descriptive and multivariate statistics were computed, and Chi‐square tests and logistic binary regression were used to identify the factors related to early failure.ResultsThe study sample consisted of 1674 patients, who had 4886 implants installed and were selected for statistical analysis. A total of 3219 implants were inserted in women and 1667 in men. The main outcome variable was early implant failure due to infection. There were 164 early failures in the study, accounting for 3.3% of the sample. Of those failures, 35 were a consequence of postoperative infection, resulting in 21.34% of early failures. The main risk factor identified was the presence of infection (odds ratio [OR] = 53.67, with 95% confidence interval [CI]).ConclusionsThe study's results suggest that infection may be considered a risk factor for early failure of osseointegrated implants.