Simulated Precipitation Research Articles

Emergent Constraint on Projection of the North Pacific Monsoon Trough and Its Implications for Typhoon Activity Using CMIP6 Models

AbstractThe North Pacific monsoon trough (NPMT) is an imperative large‐scale circulation pattern influencing tropical cyclone (TC) activity in the western North Pacific (WNP), thus its future change has great implications for the WNP TC activity. Here future change in the NPMT and its uncertainty are examined by using 35 climate models from Phase six of Coupled Model Intercomparison Project (CMIP6). Due to the El Niño‐like sea surface temperature (SST) pattern, the multi‐model ensemble (MME) mean projects an eastward extension of the NPMT in the latter half of the 21st century. However, considerable inter‐model uncertainty exists in the projection, which is associated with the diversity in the zonal SST gradient across the tropical Pacific. This diversity in the projected SST is largely rooted in the simulated precipitation biases in the tropical Pacific in the historical experiments of CMIP6 models, which can modulate future Pacific SST distribution through the shortwave‐SST feedback. This linkage between biases in historical climate and future climate allows us to constrain the projection by using observational data sets. Emergent constraint using observational precipitation data set reduces the projection uncertainty by 48% and projects an eastward extension of the north Pacific NPMT by 6.2°. This eastward extension of the NPMT indicates an eastward migration of TC genesis location, and elongated TC track and thus strengthened TC intensity, suggesting an increased TC‐related disaster for residents near the WNP.

Parameterization of the Elevated Convection With a Unified Convection Scheme (UNICON) and Its Impacts on the Diurnal Cycle of Precipitation

AbstractTo improve the simulation of nocturnal precipitation, we develop a parameterization for the elevated convection that is launched from the level of maximum grid‐mean moist static energy, when grid‐mean vertical flow is upward at the launching interface. The parameterized elevated convection is forced by both cold pool‐driven and partially resolved external mesoscale organized flows. Properties of the external mesoscale flow are estimated from grid‐mean vertical velocity and three dimensional advection tendencies of temperature and moisture. The new parameterization is implemented into a unified convection scheme (UNICON) and tested for both the single‐column case at the Southern Great Plain (SGP) site in US and in global simulations. At the SGP site, the parameterized elevated convection strengthens nocturnal convection, increases nocturnal precipitation, and better simulates the observed diurnal cycle of precipitation. It appears that the elevated and surface‐based convections interact with each other by stabilizing the atmospheric column, which affects subsequent convection. Global simulation shows that the elevated convection mostly occurs over the continents during the night, and also over the oceanic mid‐latitude warm air advection and storm track regions during summer. Without degrading global mean climate, the elevated convection improves the simulation of nocturnal precipitation in the mid‐US but simulates somewhat strong nocturnal precipitation in northeastern Asia. It seems that a key to simulate observed nocturnal precipitation is to appropriately parameterize the impacts of external organized flow on the elevated convection.

Impacts of improved horizontal resolutions in the simulations of mean and extreme precipitation using CMIP6 HighResMIP models over West Africa.

We conducted an analysis of 16 historical simulations from the High-Resolution Model Intercomparison Project (HighResMIP) as part of the Coupled Model Intercomparison Project (CMIP) phase 6 (CMIP6). These simulations encompass both high- and low-resolution models and aim to investigate the impact of improved horizontal resolution on mean and extreme precipitation in West Africa between 1985 and 2014. Six Expert Team on Climate Change Detection and Indices (ETCCDI) were used to charactererize extreme indices. Bias adjustment was used to detect and adjust the biases in the models. Our observations indicate that the southeastern and southwestern regions of West Africa experience the most significant precipitation, which aligns with the simulations from HighResMIP. The enhanced horizontal resolution notably influences the simulation of orographically induced rainfall in elevated areas and intensifies precipitation in various aspects. When examining the highest 1-day precipitation, our observations reveal that most of the Guinea Coast region had 1-day rainfall exceeding 100mm. However, this was overestimated and in some simulations underestimated by HighResMIP simulations. Furthermore, an increase in horizontal resolution appears to enhance the ability of high-resolution models to replicate the observed patterns of heavy precipitation (R10mm) and very heavy rainfall (R20mm) days. Spatial and temporal analysis suggests that uncertainty exists in the simulation of extreme precipitation in both high- and low-resolution simulations over West Africa. Also, bias adjustment shows a significant bias in the simulations. To address this issue, we employed a bias adjustment approach.

Evaluation of Multisource Datasets in Characterizing Spatiotemporal Characteristics of Extreme Precipitation from 2001 to 2019 in China

Abstract The spatiotemporal characteristics of extreme precipitation intensity are crucial for hydroclimatic studies. This study delineates the spatiotemporal distribution features of extreme precipitation intensity across China from 2001 to 2019 using the gridded daily precipitation dataset CN05.1, constructed from an observation network of over 2400 stations. Furthermore, we evaluate the reliability of 12 widely used precipitation datasets (including gauge-based, satellite retrieval, reanalysis, and fusion products) in monitoring extreme precipitation events. Our findings indicate the following: 1) CN05.1 reveals a consistent spatial distribution characterized by a decline in extreme precipitation intensity from the southeastern coastal regions toward the northwestern inland areas of China. From 2001 to 2019, more pronounced declining intensity trends are discernible in the northern and southwestern regions of China, whereas marked increasing trends manifest in the northeastern and the Yangtze River plain regions. National mean extreme precipitation indices consistently exhibit significant increasing trends throughout China. 2) Datasets based on station observations generally exhibit superior applicability concerning spatiotemporal distribution. 3) Multisource weighted precipitation fusion products effectively capture the temporal variability of extreme precipitation indices. 4) Satellite retrieval datasets exhibit notable performance disparities in representing various intensity indices. Most products tend to overestimate the increasing trends of national mean intensity indices. 5) Reanalysis datasets tend to overestimate extreme precipitation indices, and inadequately capture the trends. ERA5 and JRA-55 underestimate trends, while CFSR and MERRA-2 significantly overestimate the trends. These findings serve as a basis for selecting reliable precipitation datasets for extreme precipitation and hydrological simulation research in China. Significance Statement Extreme precipitation events have increasingly become more widespread, posing significant threats to human lives and property. Accurately understanding the spatiotemporal patterns of these events is imperative for effective mitigation. Despite the proliferation of precipitation products, their capacity to faithfully represent extreme events remains inadequately validated. In this study, we utilize a gauge-based dataset derived from over 2400 gauge stations across China to investigate the spatiotemporal changes in extreme precipitation events from 2001 to 2019. Subsequently, we conduct a rigorous evaluation of 12 widely used precipitation datasets to assess their efficacy in depicting extreme events. The results of this research offer valuable insights into the strengths and weaknesses of various precipitation products in depicting extreme events.

ERA5 Precipitation over China: Better Relative Hourly and Daily Distribution than Absolute Values

Abstract The temporal distribution of precipitation is of great importance in water availability and the hydrological cycle. Existing studies, directly comparing observed and simulated precipitation amount and intensity over different temporal intervals, show that reanalyses overestimate precipitation frequency and underestimate precipitation intensity, and therefore cannot characterize extreme precipitations. In this study, relative values of precipitation (i.e., the cumulative fractions of precipitation on different percentiles of wettest hours or days to the annual total) were used to evaluate ERA5 over China during the warm seasons of from 1979 to 2015. We found that ERA5 well reproduced the relative values of daily precipitation to the annual total, although hourly results were less satisfied. The cumulative fractions at the hourly time scale at the 99th, 95th, and 90th percentiles were 15.2% ± 3.4%, 38.7% ± 6.6%, and 54.5% ± 7.4% for the gauge observations, and 9.0% ± 1.7%, 27.2% ± 4.0%, and 41.5% ± 5.0% for ERA5, respectively. ERA5 had excellent agreement with gauge observations at daily time scales: gauge observations were 13.0% ± 3.4%, 32.1% ± 5.1%, and 47.6% ± 5.7%, compared to 11.5% ± 3.7%, 30.7% ± 7.0%, and 46.0% ± 8.8% for ERA5, respectively. This difference was mainly due to the high frequency of hourly precipitation in the reanalyses, which were cancelled out at the daily scale. Gauge observations at the hourly scale showed an increase cumulative fraction at the 99th, 95th, and 90th percentiles (0.07% ± 0.03% decade−1, 0.15% ± 0.03% decade−1, and 0.17% ± 0.03% decade−1, respectively) from 1979 to 2015, but did not show an obvious trend at the daily scale. These tendencies were underestimated at the hourly scale but overestimated at the daily scale in ERA5. The results helped us to characterize the temporal distributions and variations of precipitation, and to deepen our understanding of hydrological processes and reanalyses performance.

Assessing spatiotemporal characteristics of atmospheric water cycle processes over the Tibetan Plateau using the WRF model and finer box model

The Tibetan Plateau (TP) is the highest and one of the most extensive plateaus in the world and serves as a hotspot of climate change. In the context of climate warming, changes in evapotranspiration (ET) and external water vapor transport have a significant impact on assessing atmospheric water cycle processes over the TP. By using the Weather Research and Forecasting (WRF) model for long-term simulations and the finer box model for the calculation of water vapor along the boundary of the TP, the external atmospheric water vapor transport and its spatiotemporal characteristics over the TP are finely described. The simulated precipitation and ET are well-simulated compared with observation. Research results show that: (1) The total water path on the TP decreases from southeast to northwest. Water vapor is mainly transported into the TP from the western and southern boundaries. The net water vapor flux transported from the western boundary to the TP by westerly wind is negative, while the net water vapor flux transported from the southern boundary to the TP by southerly wind is positive. (2) In spring and winter, water vapor is mainly transported into the TP by mid-latitude westerlies from the western boundary. In summer, water vapor transport controlled by mid-latitude westerlies weakens, and water vapor is mainly transported into the TP from the southern boundary. In autumn, water vapor controlled by mid-latitude westerlies gradually strengthens, and water vapor is mainly transported into the TP from the western boundary. In addition, the ratio of ET to precipitation on the TP is about 0.48, and the moisture recycling is about 0.37. Water vapor mainly comes from external water vapor transport.

Supercell precipitation contribution to the United States hydroclimate

AbstractThis research seeks to understand simulated supercell precipitation characteristics across the conterminous United States (CONUS) using high‐resolution, convection‐permitting, dynamically downscaled simulations for three 15‐year epochs. Epochs include a historical end‐of‐20th‐century period (1990–2005) and two end‐of‐21st‐century (2085–2100) scenarios for intermediate and pessimistic greenhouse gas concentration trajectories. Simulated updraft helicity, which measures the corkscrew flow within a storm's updraft, is used as a proxy for supercells. An algorithm tracks and catalogues updraft helicity swaths that, when buffered, are used to acquire simulated precipitation from supercells. The historical epoch provides a baseline climatology of supercell precipitation for a contemporary climate, which is then compared against the two future epochs to assess how supercell precipitation may change during the 21st century. Despite their relatively small size, supercells provide critical precipitation to the Wheat and Corn Belts, large expanses of CONUS pasture and rangeland, regional aquifers and several large river basins. Many areas in the central CONUS receive upwards of 3%–6% of their annual and 5%–8% of their warm‐season precipitation from these storms. Results suggest that precipitation contribution from supercells will decrease in the future across most of the High Plains and Central and Northern Great Plains with robust increases likely across the south‐central and Southeast regions. Supercell precipitation rates are expected to increase for large portions of the CONUS by the end‐of‐the‐21st‐century, suggesting a growing threat for flash floods from these storms as they become more efficient precipitation producers. This research provides an initial perspective on the magnitude of supercell precipitation and potential changes to this important hydrologic input to assist water‐sensitive industries, private and public insurance markets, agriculture entities, as well as inform plans to mitigate and build resilience to rapid environmental and societal change.

Last Glacial Maximum climate and atmospheric circulation over the Australian region from climate models

Abstract. The Last Glacial Maximum (LGM; ∼21 kyr ago) was the most recent time that the Earth experienced global maximum ice volume and minimum eustatic sea level. The climate changes over the Australian region at the LGM remain uncertain, including the extent of cooling in the arid interior, changes in the regional atmospheric circulations such as the tropical monsoon and mid-latitude westerlies, and changes in the balance between precipitation and evaporation. In this study, 13 climate model simulations that were included in the Paleoclimate Modelling Intercomparison Project (PMIP) Phases 3 and 4 are used to investigate regional climate (temperature, precipitation, and wind) over Australia at the LGM. The model simulations are compared with existing proxy records and other modelling studies. All models simulate consistent annual and seasonal cooling over the Australian region (defined as 0–45° S, 110–160° E) at the LGM compared to pre-industrial, with a multi-model mean 2.9 °C decrease in annual average surface air temperature over land at the LGM compared to pre-industrial. Models simulate a range of LGM precipitation anomalies over the region. Simulated precipitation changes over tropical Australasia appear to be driven by changes in circulation and moisture transport, which vary greatly between models. Surface moisture balance calculated from precipitation minus evaporation shows little change over much of the Australian land area at the LGM. Changes in the strength and position of the mid-latitude westerlies are uncertain, with wide model disagreement. These results indicate that climate model simulations do not show a robust response in either tropical or mid-latitude circulation to LGM boundary conditions, suggesting that caution is required when interpreting model output in this region. Further analysis based on model evaluation and quantitative model–proxy comparison is required to better understand the drivers of LGM climate and atmospheric circulation changes in this region.

Towards an advanced representation of precipitation over Morocco in a global climate model with resolution enhancement and empirical run‐time bias corrections

AbstractMorocco, as a Mediterranean and North African country, is acknowledged as a climate change hotspot, where increased drought and related water resource shortages present a real challenge for human and natural systems. However, its geographic position and regional characteristics make the simulation of the distribution and variability of precipitation particularly challenging in the region. In this study, we propose an approach where the Laboratoire de Météorologie Dynamique Zoom (LMDZ) GCM is run with a stretched grid configuration developed with enhanced resolution (35 km) over the region, and we apply run‐time bias correction to deal with the atmospheric model's systematic errors on large‐scale circulation. The bias‐correction terms for wind and temperature are built using the climatological mean of the adjustment terms on tendency errors in an LMDZ simulation relaxed towards ERA5 reanalyses. The free reference run with the zoomed configuration is compared to two bias‐corrected runs. The free run exhibits noticeable improvements in mean low‐level circulation, high frequency variability and moisture transport and compares favourably to precipitation observations at the local scale. The mean simulated climate is substantially improved after bias correction w.r.t. to the uncorrected runs. At the regional scale, the bias‐correction showed improvements in moisture transport and precipitation distribution, but no noticeable effect was observed in mean precipitation amounts, interannual variability and extreme events. To address the latter, model tuning after grid refinement and developing more “scale‐aware” parameterizations are necessary. The observed improvements on the large‐scale circulation suggest that the run‐time bias correction can be used to drive regional climate models for a better representation of regional and local climate. It can also be combined with “a posteriori” bias correction methods to improve local precipitation simulation, including extreme events.

Assessment of mean precipitation and precipitation extremes in Iran as simulated by dynamically downscaled RegCM4

This paper aims to assess the mean precipitation and precipitation extremes over Iran as simulated by the Regional Climate Model (RegCM4). A simulation spanning 20 years (1991–2010) at a horizontal resolution of 20 Km is driven by the NCEP / NCAR reanalysis. We evaluated the model by comparing simulated precipitation with observations using Bias, Root-Mean-Square Error, and Index of Agreement metrics. We examined the extreme precipitations based on a set of extreme indices recommended by the Expert Team on Climate Change Detection and Indices (ETCCDI) in three categories of intensity (Rx1day and SDII), duration (CDD and CWD), and frequency (R10mm and R20mm). The linear trends are calculated using the Theil–Sen estimator method, and the statistical significance (95% confidence level) is determined by using a modified Mann-Kendall (MMK) trend test. The RegCM4 model satisfactory captured the spatial distribution of precipitation and precipitation extremes, although high bias remained in small parts of Iran, including the northwest and southeast. The northwest bias is due to spring convectional precipitation and the southeast bias could be caused by precipitation from the Asian summer monsoon system, which both of them may not be well simulated by the applied Grell convective scheme. Results indicate that the model reasonably captures Rx1day, SDII, CWD, R10mm, and R20mm Indices over Iran. In good agreement with precipitation observations, the southern coast of the Caspian Sea represents the second-highest extreme precipitation, except for SDII, which is probably due to the high frequency of rainy days in this region. The highest CDD of more than 200 days is found in the arid and semi-arid regions of the southeast. In general, precipitation decreased in most regions of Iran, especially the western, southern, and interior regions. In addition, the results reveal that heavy (R10mm) and very heavy (R20mm) precipitation events have also decreased in the same regions. Results also emphasize an increase in consecutive dry days (CDD) in most parts, especially in the southeast, which deserves more attention in future research. The decreasing trend of precipitation and the increasing trend of CDD show that Iran has become drier in the 2000 s compared to the 1990 s

What controls the tail behaviour of flood series: rainfall or runoff generation?

Abstract. Many observed time series of precipitation and streamflow show heavy-tail behaviour. For heavy-tailed distributions, the occurrence of extreme events has a higher probability than for distributions with an exponentially receding tail. If we neglect heavy-tail behaviour we might underestimate the magnitude of rarely observed, high-impact events. Robust estimation of upper-tail behaviour is often hindered by the limited length of observational records. Using long time series and a better understanding of the relevant process controls can help with achieving more robust tail estimations. Here, a simulation-based approach is used to analyse the effect of precipitation and runoff generation characteristics on the upper tail of flood peak distributions. Long, synthetic precipitation time series with different tail behaviour are produced by a stochastic weather generator. These are used to force a conceptual rainfall–runoff model. In addition, catchment characteristics linked to a threshold process in the runoff generation are varied between model runs. We characterize the upper-tail behaviour of the simulated precipitation and discharge time series with the shape parameter of the generalized extreme value (GEV) distribution. Our analysis shows that runoff generation can strongly modulate the tail behaviour of flood peak distributions. In particular, threshold processes in the runoff generation lead to heavier tails. Beyond a certain return period, the influence of catchment processes decreases and the tail of the rainfall distribution asymptotically governs the tail of the flood peak distribution. Beyond which return period this is the case depends on the catchment storage in relation to the mean annual rainfall amount.

Spatial spin-up of precipitation in limited-area convection-permitting simulations over North America using the CRCM6/GEM5.0 model

Abstract. A fundamental issue associated with the dynamical downscaling technique using limited-area models is related to the presence of a “spatial spin-up” belt close to the lateral boundaries where small-scale features are only partially developed. Here, we introduce a method to identify the distance from the border that is affected by the spatial spin-up (i.e., the spatial spin-up distance) of the precipitation field in convection-permitting model (CPM) simulations. Using a domain over eastern North America, this new method is applied to several simulations that differ on the nesting approach (single or double nesting) and the 3-D variables used to drive the CPM simulation. Our findings highlight three key points. Firstly, when using a single nesting approach, the spin-up distance from lateral boundaries can extend up to 300 km (around 120 CPM grid points), varying across seasons, boundaries and driving variables. Secondly, the greatest spin-up distances occur in winter at the western and southern boundaries, likely due to strong atmospheric inflow during these seasons. Thirdly, employing a double nesting approach with a comprehensive set of microphysical variables to drive CPM simulations offers clear advantages. The computational gains from reducing spatial spin-up outweigh the costs associated with the more demanding intermediate simulation of the double nesting. These results have practical implications for optimizing CPM simulation configurations, encompassing domain selection and driving strategies.

Role of Cr in Mn-rich precipitates for Al–Mn–Cr–Zr-based alloys tailored for additive manufacturing

Novel alloy concepts enabled via additive manufacturing processes have opened up the possibility of tailoring properties beyond the scope of conventional casting and powder metallurgy processes. The authors have previously presented a novel Al–Mn–Cr–Zr-based alloy system containing three times the equilibrium amounts of Mn and Zr. The alloys were produced via a powder bed fusion-laser beam (PBF-LB) process taking advantage of rapid cooling and solidification characteristics of the process. This supersaturation can then be leveraged to provide high precipitation hardening via direct ageing heat treatments. The hardening is enabled with Zr-rich and Mn-rich precipitates. Literature study confirms that Mn-rich precipitates have a notable solubility of Cr, for example, the Al12Mn precipitate. This study aims to clarify the effect of Cr solubility in the thermodynamics and kinetics simulation and compare the precipitation simulations with samples subject to >1000 h isothermal heat treatment, thus creating an equilibrium-like state. The results show that Cr addition to the precipitates stabilizes the Al12Mn precipitate while slowing the precipitation kinetics thus producing a favourable hardening response. Such observations could be insightful while designing such alloys and optimising heat treatments of the current or even a future alloy system.

Topographic Elevation’s Impact on Local Climate and Extreme Rainfall: A Case Study of Zhengzhou, Henan

The topography significantly influences local climate precipitation and the intensity of precipitation events, yet the specific differences in its elevational effects require further understanding. This study focuses on precipitation in Zhengzhou City, Henan Province, utilizing hourly data and a topographic elevation precipitation increment model to assess the impact of topography on local climate precipitation and extreme heavy rainfall events. The results indicate that the daily precipitation attributed to topographic elevation in Zhengzhou in July was 0.21 mm, accounting for 4.9% of the total precipitation. In the extreme heavy rainfall event on 20 July 2021 (“7.20” event), the precipitation due to topographic elevation reaches 48.7 mm, constituting 15.8% of the total precipitation. Additionally, numerical simulations using the Weather Research and Forecasting (WRF) model for the 20–21 July 2021 rainfall event in Zhengzhou show that the WRF model effectively reproduces the spatiotemporal characteristics of the precipitation process. The simulated topographic elevation precipitation intensity is 49.8 mm/day, accounting for 16.6% of daily precipitation, closely resembling observational data. Sensitivity experiments further reveal that reducing the heights of the Taihang Mountains and Funiu Mountains weakens the low-level easterly winds around Zhengzhou. Consequently, as the center of the heavy rainfall shifts northward or westward, the intensity of topographic elevation-induced precipitation decreases to 7.3 mm/day and 12.9 mm/day.

What Controls the December Precipitation Deficit over the Southern Tibetan Plateau and the Northern Indian Continent?

Abstract Winter precipitation is critical for glacier growth, snow accumulation, and terrestrial storage on the Tibetan Plateau (TP). However, less attention has been paid to the changes in winter precipitation on the TP. In this study, based on the newly developed high-accuracy precipitation dataset, our diagnosis illustrated a distinct precipitation deficit over the southern TP and northern Indian continent (STNI) in December. Together with the ERA5 reanalysis, CESM1.1 large ensemble experiments, and pacemaker experiments, the dynamic diagnosis revealed that the precipitation deficit was attributed to the decrease in dynamic effects. In particular, the enhanced descending motion, accompanied by the strengthened anticyclone and regional meridional circulation over the STNI, resulted in the precipitation deficit. The changes in circulation system related to the precipitation deficit could be attributed to the Pacific and Indian sea surface temperature (SST) variability. With the negative interdecadal Pacific oscillation (IPO), there were circumglobal alternative geopotential height anomalies and an anomalous anticyclone over the southern TP, and descending motion around the STNI associated with the enhanced Walker circulation over the Indo-Pacific, which exhibited a similar pattern to the precipitation deficit over the STNI in the observations. In addition, the synergistic effect of Pacific and Indian SST variability can improve the simulated precipitation deficit over the STNI relative to the Pacific SST variability alone. These results imply a contribution of the tropical SST variability to the precipitation trends over the STNI in early winter and provide an insight into the understanding of climate warming on the winter climate over the TP.

A Standardized Benchmarking Framework to Assess Downscaled Precipitation Simulations

Abstract Presently, there is no standardized framework or metrics identified to assess regional climate model precipitation output. Because of this, it can be difficult to make a one-to-one comparison of their performance between regions or studies, or against coarser-resolution global climate models. To address this, we introduce the first steps toward establishing a dynamic, yet standardized, benchmarking framework that can be used to assess model skill in simulating various characteristics of rainfall. Benchmarking differs from typical model evaluation in that it requires that performance expectations are set a priori. This framework has innumerable applications to underpin scientific studies that assess model performance, inform model development priorities, and aid stakeholder decision-making by providing a structured methodology to identify fit-for-purpose model simulations for climate risk assessments and adaptation strategies. While this framework can be applied to regional climate model simulations at any spatial domain, we demonstrate its effectiveness over Australia using high-resolution, 0.5° × 0.5° simulations from the CORDEX-Australasia ensemble. We provide recommendations for selecting metrics and pragmatic benchmarking thresholds depending on the application of the framework. This includes a top tier of minimum standard metrics to establish a minimum benchmarking standard for ongoing climate model assessment. We present multiple applications of the framework using feedback received from potential user communities and encourage the scientific and user community to build on this framework by tailoring benchmarks and incorporating additional metrics specific to their application. Significance Statement We introduce a standardized benchmarking framework for assessing the skill of regional climate models in simulating precipitation. This framework addresses the lack of a uniform approach in the scientific community and has diverse applications in scientific research, model development, and societal decision-making. We define a set of minimum standard metrics to underpin ongoing climate model assessments that quantify model skill in simulating fundamental characteristics of rainfall. We provide guidance for selecting metrics and defining benchmarking thresholds, demonstrated using multiple case studies over Australia. This framework has broad applications for numerous user communities and provides a structured methodology for the assessment of model performance.

Modeling future (2021–2050) meteorological drought characteristics using CMIP6 climate scenarios in the Western Cape Province, South Africa

Consistent drought modelling under plausible shared socioeconomic–representative concentration pathways (SSP–RCPs) are crucial for effectively managing future drought risk in agricultural environments. The Western Cape (WC) is one of South Africa’s main agro-based provinces and faces a mounting threat of water insecurity due to recurrent drought. The objective of this study was to predict meteorological drought hazard for 2021–2050 based on three CMIP6 scenarios: SSP5–8.5, SSP2–4.5 and SSP1–2.6. Precipitation simulations generated by the sixth version of Model for Interdisciplinary Research on Climate (MIROC6) under the SSP5–8.5, SSP2–4.5 and SSP1–2.6 scenarios were used from fifteen stations across the six AEZs of the WC province. The Standardised Precipitation Index (SPI) was computed at 12-month timescales. Trend analysis of precipitation datasets and the SPI-values were done at p < 0.05 using the Mann–Kendall (M–K) test. The findings revealed negative precipitation trends of − 7.6 mm/year in Ceres, while positive trends of 0.3 mm/year were observed in Malmesbury. These findings indicate an improvement from − 7.8 and − 6.4 mm/year in the same regions, respectively, compared to historical trends observed between 1980 and 2020. The results suggest that in 2042 and 2044, Bredasdorp will experience − 2 < SPI < − 1.5 under the SSP2–4.5 scenarios, while Matroosberg in 2038 under the SSP5–8.5 will experience SPI > − 2. The findings of this study will assist in the development of proactive planning and implementation of drought mitigation strategies and policies aimed at reducing water insecurity in AEZs.

The Response of Precipitation to Initial Soil Moisture over the Tibetan Plateau: Respective Effects of Boundary Layer Vertical Heat and Vapor Diffusions

Abstract This study investigates the influences of initial soil moisture over the Tibetan Plateau (TP) on precipitation simulation, and the respective effects of boundary layer vertical diffusion for heat (Kh) and vapor (Kq). Results indicate that the responses of boundary layer vertical diffusion to soil moisture are obvious mainly in the daytime. Wetter land surface corresponds to weaker vertical diffusion, which could strengthen thermal forcing and dynamic lifting in the lower atmosphere, and encourage water vapor saturation near the top of boundary layer to prevent the environmental dry air entrainment/invasion, which would be beneficial to more convection and precipitation. Wetter land surface over the TP could enhance the contrast between the cold in the northwestern TP and the warm in the southeastern TP, which would be conducive to the southeastward propagation of precipitation. The simulation of heat and moisture in the boundary layer could be improved by perturbing the relative intensity of Kh and Kq. From the perspective of heat and moisture, Kh affects atmospheric stability, while Kq affects moisture and its vertical transport in the boundary layer. The Kh and Kq have competitive effects on precipitation intensity by influencing the relative importance of moisture and atmospheric stability conditions in the boundary layer. Adjusting the relative intensity of Kh and Kq would deactivate the competitive effects. Stronger Kh but weaker Kq would alleviate the overestimated precipitation by inhibiting vertical transport of moisture to the top of boundary layer and attenuating convective instability in the boundary layer. Significance Statement The purpose of this study is to better understand the effects of boundary layer vertical heat and moisture diffusion in the response of precipitation to soil moisture. This is important because boundary layer vertical diffusion is a crucial factor influencing the relation between soil moisture and precipitation. Our results reveal the competitive effects of boundary layer vertical diffusion for heat and vapor on the simulation of precipitation. These results point a potential way toward better understanding the response of precipitation to soil moisture.

Effects of Stocking Rates and Simulated Precipitation on Soil Respiration in a Stipa breviflora Desert Steppe, Inner Mongolia, China

Effects of Stocking Rates and Simulated Precipitation on Soil Respiration in a Stipa breviflora Desert Steppe, Inner Mongolia, China

Modeling collision–coalescence in particle microphysics: numerical convergence of mean and variance of precipitation in cloud simulations using the University of Warsaw Lagrangian Cloud Model (UWLCM) 2.1

Modeling collision–coalescence in particle microphysics: numerical convergence of mean and variance of precipitation in cloud simulations using the University of Warsaw Lagrangian Cloud Model (UWLCM) 2.1