Separation Of Cations Research Articles

Guanidinium‐Based Covalent Organic Framework Membranes for Superior Mono‐ and Divalent Cations Separation

Biological membranes exhibit extraordinary efficiency in processing ion permeability and selectivity. However, creating artificial membranes for an ideal ion separation is still challenging due to the subtle distinctions in valence and size among different ions. In the realm of biological recognition, the ultimate selectivity of ion channels is considered to stem from the specific binding interactions and appropriate charge density. Designing artificial membranes to achieve similar performance not only helps the understanding of complex ion transport in bioprocesses but also facilitates critical industrial separations. Inspiring by the remarkable performance in biological systems, a guanidinium‐based covalent organic framework membrane is designed, which exhibits an excellent capability to recognize mono‐/divalent cations, achieving K+/Mg2+ selectivity up to 202 in a mixed salt solution. Furthermore, the membrane displays rapid ion transport owing to the uniform sub‐2 nm channels. The experimental results and molecular dynamics simulations illustrate that the charge‐assisted hydrogen bonding sites and the Cl− counter ions within 1D channels play critical roles in cations sieving. Specifically, divalent ions passing through the positively charged channels need to overcome higher energy barriers than monovalent ions. These findings offer promising avenues for the development of advanced multifunctional membranes for efficient ion separation and sustainable water‐related separations.

Spatial Size Manipulation of 1D/2D Channels in Covalent Organic Framework Membranes Through Dopamine Chemistry for Ion Separations

AbstractCovalent organic framework (COF) membranes feature with well‐developed 1D in‐plane pores and parallelly arranged 2D interlayer gallery, presenting promising platform for precise separations. However, it remains a formidable challenge to construct and regulate membrane channels at angstrom scale. Herein, pH‐sensitive dopamine is taken advantage to elaborately engineer the spatial size of 1D/2D channels in COF membranes for the separations of alkali metal ions. Acid treatment allows monomolecular dopamine to segment 1D in‐plane pores of COF membrane, achieving ultramicroporous regulation from 1.25 nm to 0.71 nm, which enables high selectivity of 18.7 for K+/Li+ separation. Molecular dynamics simulations reveal the higher dehydration degree, weaker channel‐cation interaction and faster diffusion coefficient of K+ than Li+. For alkaline treatment, dopamine self‐polymerizes to form nanoparticles between COF layers, which enlarges the 2D interlayer channels from 0.33 nm to 0.45 nm in COF membrane, enabling high‐permeance ion/molecule separations. The water permeance increases 86.7% to 404 L m−2 h−1 bar−1, without the sacrifice of membrane sieving ability. Both cation separation and ion/molecule separation performances outperform the current state‐of‐the‐art membranes. This dopamine‐mediated channel engineering strategy may provide the new insights for the design of membrane channels in precise separations.

Engineering of Covalent Organic Framework Nanosheet Membranes for Fast and Efficient Ion Sieving: Charge-Induced Cation Confined Transport.

Artificial membranes with ion-selective nanochannels for high-efficiency mono/divalent ion separation are of great significance in water desalination and lithium-ion extraction, but they remain a great challenge due to the slight physicochemical property differences of various ions. Here, the successful synthesis of two-dimensional TpEBr-based covalent organic framework (COF) nanosheets, and the stacking of them as consecutive membranes for efficient mono/divalent ion separation is reported. The obtained COF nanosheet membranes with intrinsic one-dimensional pores and abundant cationic sites display high permeation rates for monovalent cations (K+, Na+, Li+) of ≈0.1-0.3mol m-2 h-1, while the value of divalent cations (Ca2+, Mg2+) is two orders of magnitude lower, resulting in an ultrahigh mono/divalent cation separation selectivity up to 130.4, superior to the state-of-the-art ion sieving membranes. Molecular dynamics simulations further confirm that electrostatic interaction controls the confined transport of cations through the cationic COF nanopores, where multivalent cations face i) strong electrostatic repulsion and ii) steric transport hindrance since the large hydrated divalent cations are retarded due to a layer of strongly adsorbed chloride ions at the pore wall, while smaller monovalent cations can swiftly permeate through the nanopores.

Charge‐Sign‐Independent Separation of Mono‐ and Divalent Ions With Nanofiltration Membranes

AbstractAchieving precise selective separation of monovalent and divalent cations, as well as anions, is vital yet challenging in practical applications involving complex component treatments. Current membranes are typically effective for separating either cation pairs or anion pairs. To address this issue, a straightforward strategy for fabricating a nanofiltration (NF) membrane is developed that selectively permeates monovalent ions. This study focused on neutralizing the surface charge and tuning the pore size distribution of the polyamide membranes through a secondary interfacial polymerization using a zwitterionic copolymer consisting of 2‐methacryloyloxyethyl phosphorylcholine and 2‐aminoethyl methacrylate hydrochloride. The optimized NF membrane prepared in this study, with a near‐neutrally charged membrane surface and appropriate pore size distribution, demonstrates favorable performance in precisely separating monovalent and divalent ions, irrespective of the ion charge sign. The optimum NF membrane features high selectivity for both Cl−/SO42− (93) and Li+/Mg2+ (67) ion pairs, along with high water permeance of 8.5 L m−2 h−1 bar−1, making it competitive with many reported membranes. This study offers new insights into the ion‐selective mechanisms of polyamide membranes for monovalent/divalent ions and may guide the development of advanced membranes with single‐solute selectivity.

Two-dimensional montmorillonite membranes with controllable sub-nanochannel for precise separation of mono/divalent cations

Two-dimensional (2D) membranes with highly ordered nanoscale interlayer channels have received considerable attention to emerge as a desirable candidate for ions separation application. However, the unstable channel height of 2D membranes in aqueous environment results in labile ions separation selectivity. Herein, tetraethylenepentamine (TEPA) is introduced to the 2D montmorillonite (MMT) membrane, which plays a significant role in the precise control of channel height. This is due to that protonated TEPA can exchange into the interlayer of MMT membranes and the hydrophobic chain of TEPA can prevent water molecules from entering the channel. Based on the precise control of channel height by using different amounts of TEPA, the optimum channel heights with undetectable Mg2+ ions were found. Furthermore, the suitable channel heights for K+/Mg2+, Na+/Mg2+ and Li+/Mg2+ ions separation are proved to be 0.59 nm, 0.57 nm and 0.5 nm, respectively. Also, the permeation selectivity of K+/Mg2+, Na+/Mg2+ and Li+/Mg2+ are 676, 399 and 96, respectively. This strategy realizes the precise control of the channel height in the sub-nanometer scale and demonstrates the potential of MMT membranes for mono/divalent cations separation, providing a feasible and scalable pathway for developing high-performance 2D channel membranes.

Selective Single-Atom Adsorption for Precision Separation of Lead Ions in Tap Water via Capacitive Deionization

Capacitive deionization (CDI) offers a cost-effective and low-energy method for selective removal of Pb2+ from drinking water. Modifying CDI electrode surfaces with functional groups presents a versatile approach to enhancing selective ion adsorption capacity. However, a comprehensive understanding of the selectivity and removal efficiency of Pb2+ among diverse functional groups remains unexplored. Here, we investigated the effects of different functional groups (-SH, -COOH, and -NH2) attached to the graphene oxide (GO) electrode surfaces on Pb2+ selectivity and removal efficiency. Surprisingly, GO-COOH demonstrated single-atom adsorption of Pb2+, displaying superior removal efficiency and selectivity compared with -SH and -NH2, although -SH possesses significant chelation capability for Pb2+. Both density functional theory (DFT) calculations and X-ray pair distribution function (PDF) analyses confirmed that Pb2+ exhibits a theoretically higher affinity to -COOH. This research deepens our understanding of the interactions between functional groups and heavy metal ions, enabling selective and rapid separation of target cations for water purification.

Cation selectivity during flow electrode capacitive deionization

Efficient separation of specific ions from aqueous media is crucial for advanced water treatment and resource recovery. Flow electrode capacitive deionization (FCDI) offers potential for selective ion removal through continuous operation. This study evaluates the performance of selective cation separation using a commercial activated carbon slurry in a multi-ion solution of monovalent (Li+, Na+, K+) and bivalent (Ca2+, Mg2+) cations. We assess ion removal and cation selectivity under different operational parameters, such as applied potential, slurry flow rate, and feed water flow rate. Our data show that bivalent cations, namely Ca2+ and Mg2+, are preferentially removal due to their higher charge-to-size ratio, aligning with hydrated ion sizes. The highest separation rate was observed for Ca2+ (5.7 μg cm−2 min−1), and the lowest for Li+ (0.2 μg cm−2 min−1). At the highest applied voltage (1.2 V), charge efficiencies reached 70 %, with an energy consumption of 41 Wh mol−1 for nearly complete cation removal. Optimal conditions were identified with a slurry flow rate of 6 mL min−1, feed water flow rate of 2 mL min−1, activated carbon content of 10 mass%, 1 mass% carbon black, and a cell voltage of 1.2 V. These findings highlight the importance of optimizing operational parameters to enhance ion removal.

Ionic species representations for materials informatics

High-dimensional representations of the elements have become common within the field of materials informatics to build useful, structure-agnostic models for the chemistry of materials. However, the characteristics of elements change when they adopt a given oxidation state, with distinct structural preferences and physical properties. We explore several methods for developing embedding vectors of elements decorated with oxidation states. Graphs generated from 110 160 crystals are used to train representations of 84 elements that form 336 species. Clustering these learned representations of ionic species in low-dimensional space reproduces expected chemical heuristics, particularly the separation of cations from anions. We show that these representations have enhanced expressive power for property prediction tasks involving inorganic compounds. We expect that ionic representations, necessary for the description of mixed valence and complex magnetic systems, will support more powerful machine learning models for materials.

Tailoring Polyamide Nanofiltration Membranes by Switching Charge of Nanocellulose Interlayers.

The interlayer strategy has emerged as an effective approach for modulating the interfacial polymerization process and improving the permeability and selectivity of polyamide membranes. However, the underlying mechanisms by which charged interlayers influence the interfacial polymerization process remain inadequately understood. In this study, we utilized two distinct charged cellulose nanofibers, namely, carboxylated cellulose (⊖-CNF) and quaternized cellulose ([Formula: see text]-CNF), as interlayers to regulate the interfacial polymerization process. Through simulation results, isothermal titration calorimetry (ITC) and UV tests, we demonstrated that the [Formula: see text]-CNF interlayer, which possesses stronger hydration capability and better piperazine affinity, enhanced the diffusion of piperazine across the reaction interface compared with the ⊖-CNF interlayer. This led to an acceleration of the interfacial polymerization process and the formation of a denser membrane structure. Further investigation revealed that the charged interlayers significantly influenced the surface charging properties of the resulting nanofiltration membranes within a 30 nm range of electrostatic effects. Specifically, the ⊖-CNF interlayer conferred a higher negative charge to the membrane surface, while the [Formula: see text]-CNF interlayer endowed the membranes with a lower surface negative charge. Leveraging these differences, the ⊖-i-TFC membranes exhibited exceptional separation performance for divalent anions, achieving a SO42-/Cl- selectivity of 136. Conversely, the [Formula: see text]-i-TFC membrane demonstrated an enhanced separation of divalent cations, displaying a Mg2+/Na+ selectivity of 3.5. This study lays the groundwork for regulating the surface charging properties of polyamide membranes, offering potential advancements in nanofiltration applications.

Rational construction of positively charged polyamide nanofiltration membranes for precision cation separations

Nanofiltration has gained extensive attention in various energetically efficient separations towards a sustainable water–energy nexus. However, state-of-the-art polyamide nanofiltration membranes are constrained by the inherent trade-off between water permeance and solute selectivity, and a remarkable improvement in membrane permselectivity remains a big challenge. Here we conceived a density functional theory (DFT) assisted surface modification approach using triaminoguanidine hydrochloride (TGH) as the functional modifier to fabricate polyamide membranes with extremely high surface electropositivity and well-defined nanopores to overcome this challenge. Experimental data and DFT simulation results show that TGH surface modification can significantly manipulate surface charges and polarity to facilitate water permeation and enhance Donnan exclusion selectivity. Compared with the pristine benchmark membrane, the TGH-modified membrane exhibited a 4-fold increase in water permeance and a 6-fold increase in salt rejection, which successfully breaks the trade-off, excellent monovalent/divalent cation selectivity, and superior operational stability over a wide range of testing pressure, feed pH, and operation time, outperforming state-of-the-art membranes with similar chemistry. Taken together, this study demonstrates a feasible and reliable method combining DFT and experiments to rationally tailor the membrane characteristics at the molecular level, enabling the successful fabrication of effective polyamide nanofiltration membranes with precisely regulated structural and surface properties for water purification and precision ion separations.

Utilization of Matrix Effect for Enhancing Resolution in Cation Exchange Chromatography.

In ion chromatography studies, the matrix effect of other inorganic ions present in the sample is a well-known phenomenon. In this work, the behavior of inorganic and organic ions was studied in a system overloaded with ammonium ions. The ammonium ions came from a solution of ammonium hydroxide in various concentrations (0.25-1.25%). In this system, which was significantly overloaded with ammonium ions, the behavior of three ions were tested (lithium, tris, and sodium cations). The measurements were performed at different eluent concentrations (6-17 mM), chromatographic column temperatures (25-40 °C), and injected volumes (15-40 µL). The retention times of sodium and lithium ions increased with increasing amounts of injected ammonium, while tris remained essentially unchanged, indicating that the resolution of these ions can be influenced by varying the concentration of the matrix. The results suggested that the observed effect was due to a combination of the pH change caused by the injected matrix, the dissociation of tris ions, the dissociation of the carbocylic ion-exchange groups of stationary phase, the change in buffer capacity, and the amount of ammonium ion introduced. It has been shown that in a well-designed experiment, the addition of ammonium hydroxide to the sample at concentrations greater than 1% can improve the efficiency of organic and inorganic cation separation. It was found that 8 mM methanesulfonic acid eluent, 30 °C, 1% ammonium hydroxide matrix concentration, and 25 µL injection were optimal for the baseline separation of tris and sodium ions on the high-capacity Dionex CS16 column. These ions could not be separated on this column without the presence of the ammonium matrix.

Selective mono/divalent ion separation in bifunctional ionomeric capacitive deionization incorporated with counter-charge ionomer layer

In this study, a carbon-based bifunctional ionomeric capacitive deionization (BICDI) system was successfully developed by applying a counter-charge ionomer layer to the BICDI electrode without the need of a monovalent ion exchange membrane (M-IEM) for the selective separation of mono/divalent ions. The counter-charge ionomer layer facilitates the selective separation of mono/divalent ions through a combination of mechanisms involving electrostatic repulsion, steric hindrance, and hydrophobic interactions. Meanwhile, the BICDI electrode matrix serves as an ion transport channel, enabling seamless ion transport and improving the electrosorption capacity of the electrode. SEM and EDS analyses have confirmed the presence of a counter-charge ionomer layer encapsulating the BICDI electrode. Notably, BICDI-C cell with counter-charge ionomer layer exhibits higher Li+ ion adsorption capacity and selectivity (321.6 μmol/g, βMg2+Li+=6.6) compared to commercial monovalent cation exchange membrane CDI (MCDI-C) cell (206.4 μmol/g, βMg2+Li+=1.4). The selectivity of the BICDI-C cell for mono/divalent ions can be optimized by adjusting various testing parameters, including flow rate, voltage, etc. More importantly, this versatile method is not only applicable for the separation of monovalent cation, but can also enhance the monovalent anion adsorption capacity and selectivity of BICDI-A (43.6 μmol/g, βSO42-Cl-=7.3) cell by incorporating a counter-charge ionomer layer onto the BICDI cathode. This approach allows for the efficient separation of both cationic and anionic species, broadening the range of potential applications for BICDI technology.

Tailor-Made Heterocharged Covalent Organic Framework Membrane for Efficient Ion Separation.

Pore size sieving, Donnan exclusion, and their combined effects seriously affect ion separation of membrane processes. However, traditional polymer-based membranes face some challenges in precisely controlling both charge distribution and pore size on the membrane surface, which hinders the ion separation performance, such as heavy metal ion removal. Herein, the heterocharged covalent organic framework (COF) membrane is reported by assembling two kinds of ionic COF nanosheets with opposite charges and different pore sizes. By manipulating the stacking quantity and sequence of two kinds of nanosheets, the impact of membrane surface charge and pore size on the separation performance of monovalent and multivalent ions is investigated. For the separation of anions, the effect of pore size sieving is dominant, while for the separation of cations, the effect of Donnan exclusion is dominant. The heterocharged TpEBr/TpPa-SO3H membrane with a positively charged upper layer and a negatively charged bottom layer exhibits excellent rejection of multivalent anions and cations (Ni2+, Cd2+, Cr2+, CrO4 2-, SeO3 2-, etc). The strategy provides not only high-performance COF membranes for ion separation but also an inspiration for the engineering of heterocharged membranes.

Nanofiltration membrane functionalization with enhanced hardness cation removal using a mono-component interlayer

Current drinking water treatment demands new nanofiltration (NF) membranes to achieve efficient separation performance of both divalent hardness cations and new contaminants (ECs). In this work, we utilized sodium alginate as an interlayer to fabricate modified NF membrane with enhanced separation capacity. The interlayer was formed on substrate before interfacial polymerization reaction, controlling the irregular mass transfer of piperazine monomers and forming a crosslinked network at the bottom of the active layer to enhance the separation performance. Alginate modification method was proved achieving excellent separation of hardness cations by the surface potential shift and sharpened pore size distribution, while exhibiting high rejection for SO42− (≥99.00 %) by maintaining a negative membrane surface charge. The modified membrane provided efficient hardness removal (90.79 % for Ca2+, 95.94 % for Mg2+) and enhanced anionic ECs rejection (95.24 % for PFOA, 98.44 % for PFOS), while maintaining operational stability, thus providing drinking water treatment potential for groundwater with high total dissolved solids.

Micro- and Nanofluidic pH Sensors Based on Electrodiffusioosmosis.

Recently, various kinds of micro- and nanofluidic functional devices have been proposed, where a large surface-to-volume ratio often plays an important role in nanoscale ion transport phenomena. Ionic current analysis methods for ions, molecules, nanoparticles, and biological cells have attracted significant attention. In this study, focusing on ionic current rectification (ICR) caused by the separation of cation and anion transport in nanochannels, we successfully induce electrodiffusioosmosis with concentration differences between protons separated by nanochannels. The proton concentration in sample solutions is quantitatively evaluated in the range from pH 1.68 to 10.01 with a slope of 243 mV/pH at a galvanostatic current of 3 nA. Herein, three types of micro- and nanochannels are proposed to improve the stability and measurement accuracy of the current-voltage characteristics, and the ICR effects on pH analysis are evaluated. It is found that a nanochannel filled with polyethylene glycol exhibits increased impedance and an improved ICR ratio. The present principle is expected to be applicable to various types of ions.

A novel chemical composite strategy for synergistically enhancing the activity and stability of strontium-containing air electrode for protonic ceramic cells

Cation segregation on perovskite electrode surfaces usually leads to a decrease in the catalytic activity of electrodes and a shortened cell life. Herein, we have developed a simple and novel chemical composite strategy to achieve selectively surface reconstruction of the Sr-rich regions in perovskite Pr0.4Sr0.6Fe0.9Nb0.1O3-δ (PSFN), constructing strongly interacting interfaces between PSFN and Fe2O3 phases. The enhanced charge transfer between the two phases in PSFN/Fe2O3 is revealed by soft X-ray absorption spectroscopy. Meanwhile, fast surface oxygen exchange rate accelerates the migration and adsorption/desorption of oxygen species. The chemical composite electrode PSFN/Fe2O3 exhibits a smaller polarization resistance (0.35 Ω cm2) than that (0.61 Ω cm2) of the physical composite electrode PSFN + Fe2O3 at 600 °C in air. The distribution of relaxation time analyses demonstrate that enhanced reaction kinetics related to charge transfer and mass transfer are key factors in achieving stable operation of symmetric cell within 1000 h. Importantly, this study provides a simple and universal strategy for surface modification of perovskite oxides with cation separation issue, and highlights the crucial role of constructing strongly interacting interfaces in achieving high activity and stability of air electrodes.

Synthesis, Structure and Antiferromagnetic Large‐Distance Long‐Range Coupling of the Ruthenate(V) Sr3(Ag2/3Sr1/6)RuO6

AbstractBlack, air‐stable crystals of the new ruthenate(V) Sr3(Ag2/3Sr1/6)RuO6 were grown in a silver ampoule using KO2 as oxidative flux. X‐ray diffraction on single‐crystals revealed a rhombohedral structure with the space group R c. Sr3(Ag2/3Sr1/6)RuO6 crystallizes isostructural to Sr4PtO6 in the K4CdCl6 structure type. By sharing trigonal faces, alternating [RuO6] octahedra and [(Ag2/3Sr1/6□1/6)O6 trigonal prisms form segmented chains running parallel to the crystallographic c‐axis. Eightfold coordinated strontium cations are located between the rods. Regardless of the wide spatial separation of the magnetic cations (588 and 594 pm), Sr3(Ag2/3Sr1/6)RuO6 shows long‐range antiferromagnetic order below the relatively high Néel temperature of 79 K in magnetic fields up to at least 9 T, as measurements of the magnetic susceptibility and heat capacity show. Despite the pseudo one‐dimensional character of the structure, the characteristic of the susceptibility indicates a three‐dimensional coupling of magnetic ions.

Regulating ion affinity and dehydration of metal-organic framework sub-nanochannels for high-precision ion separation

Membrane consisting of ordered sub-nanochannels has been pursued in ion separation technology to achieve applications including desalination, environment management, and energy conversion. However, high-precision ion separation has not yet been achieved owing to the lack of deep understanding of ion transport mechanism in confined environments. Biological ion channels can conduct ions with ultrahigh permeability and selectivity, which is inseparable from the important role of channel size and “ion-channel” interaction. Here, inspired by the biological systems, we report the high-precision separation of monovalent and divalent cations in functionalized metal-organic framework (MOF) membranes (UiO-66-(X)2, X = NH2, SH, OH and OCH3). We find that the functional group (X) and size of the MOF sub-nanochannel synergistically regulate the ion binding affinity and dehydration process, which is the key in enlarging the transport activation energy difference between target and interference ions to improve the separation performance. The K+/Mg2+ selectivity of the UiO-66-(OCH3)2 membrane reaches as high as 1567.8. This work provides a gateway to the understanding of ion transport mechanism and development of high-precision ion separation membranes.

Polyamide Membranes with Tunable Surface Charge Induced by Dipole-Dipole Interaction for Selective Ion Separation.

Nanofiltration (NF) has the potential to achieve precise ion-ion separation at the subnanometer scale, which is necessary for resource recovery and a circular water economy. Fabricating NF membranes for selective ion separation is highly desirable but represents a substantial technical challenge. Dipole-dipole interaction is a mechanism of intermolecular attractions between polar molecules with a dipole moment due to uneven charge distribution, but such an interaction has not been leveraged to tune membrane structure and selectivity. Herein, we propose a novel strategy to achieve tunable surface charge of polyamide membrane by introducing polar solvent with a large dipole moment during interfacial polymerization, in which the dipole-dipole interaction with acyl chloride groups of trimesoyl chloride (TMC) can successfully intervene in the amidation reaction to alter the density of surface carboxyl groups in the polyamide selective layer. As a result, the prepared positively charged (PEI-TMC)-NH2 and negatively charged (PEI-TMC)-COOH composite membranes, which show similarly high water permeance, demonstrate highly selective separations of cations and anions in engineering applications, respectively. Our findings, for the first time, confirm that solvent-induced dipole-dipole interactions are able to alter the charge type and density of polyamide membranes and achieve tunable surface charge for selective and efficient ion separation.

Ionized acrylamide-based copolymer / terpolymer hydrogels for recovery of positive and negative heavy metal ions.

In this study, we explored the effective capture of both cations and anions onto a single adsorbent. Acrylamide (AAm) served as the polymer backbone, onto which co-monomers sodium p-styrenesulfonate (SS) and N,N-dimethylaminopropyl acrylamide (DMAPAA) were grafted, creating ionized polymer hydrogel adsorbents. These adsorbents were engineered for the synergistic separation and recovery of heavy metal cations and anions from concentrated solutions, focusing specifically on industrially significant ions such as Ni2+-, Cu2+, Zn2+ and (Cr2O7)2-. The adsorption and desorption behaviors of the AAm terpolymer hydrogels were investigated across various pH solutions, considering the competition and concentrations of these specific metal ions. Moreover, the study delved into the effects of the internal pH environment within the hydrogel adsorbents, determining its impact on the type of metal adsorbed and the adsorption capacity. Our findings indicated that the adsorption of cations was enhanced with a higher proportion of SS relative to DMAPAA in the hydrogel. In contrast, significant anion capture occurred when the concentration of DMAPAA exceeded that of SS. However, equal ratios of SS and DMAPAA led to a noticeable reduction in the adsorption of both types of substrates, attributed to the counteractive nature of these co-monomers. To enhance the adsorption efficiency, it may be necessary to consider methods for micro-scale separation of the two types of monomers. Additionally, the adsorption capacity was observed to be directly proportional to the swelling capacity of the hydrogels. For complete desorption and separation of the cations and anions from the adsorbent, the application of concentrated NaOH solutions followed by HNO3 was found to be essential. Given the varying concentrations of cation and anion pollutants, often present in heavy metal factory effluents, it is crucial to fine-tune the ratios of DMAPAA and SS during the synthesis process. This adjustment ensures optimized efficiency in the decontamination and recovery of these significant heavy metal ions.