Sensitivity Of Nuclear Magnetic Resonance Research Articles

Spontaneous increasing of sensitivity and resolution in parahydrogen-induced hyperpolarization by RASER

Enhancing the sensitivity of nuclear magnetic resonance (NMR) technology has been the focus of NMR research for decades, which offers the potential to significantly expand its applications in chemistry, biology, and medical imaging. Parahydrogen-induced polarization (PHIP) emerges as a cost-effective approach to substantially enhance the sensitivity of NMR. Nevertheless, the amplification of the 1H signal in PHIP is susceptible to interference from the thermal polarization state 1H NMR signal. Employing RASER (radiofrequency amplification by stimulated emission of radiation) proves effective in mitigating such interference, which can reduce the linewidth and increase the sensitivity at the same time. In this work, we utilized PHIP and RASER to enhance the signal-to-noise ratio (SNR) of a series of biocompatible alkynyl organic acid molecules. The alkynyl acid with the highest enhancement factor was first identified through PASADENA (parahydrogen and synthesis allow dramatically enhanced nuclear alignment) experiments. Subsequently, RASER experiments were carried out through hyperpolarization of 5-hexynoic acid, exploring its signal characteristics under varying flow rates and pressures. The SNR of proton signals of 5-hexynoic acid surpassed 150,000, an 18.62-fold improvement compared with traditional hyperpolarized signals in PASADENA, and a markedly narrowed linewidth of 0.06 Hz.

Metabolomics-based analysis of the diatom Cheatoceros tenuissimus combining NMR and GC–MS techniques

Metabolomics, a recent addition to omics sciences, studies small molecules across plants, animals, humans, and marine organisms. Nuclear magnetic resonance (NMR) and gas chromatography-mass spectrometry (GC–MS) are widely used in those studies, including microalgae metabolomics. NMR is non-destructive and highly reproducible but has limited sensitivity, which could be supplemented by joining GC–MS analysis. Extracting metabolites from macromolecules requires optimization for trustworthy results. Different extraction methods yield distinct profiles, emphasizing the need for optimization. The results indicated that the optimized extraction procedure successfully identified NMR and GC–MS-based metabolites in MeOH, CHCl3, and H2O extraction solvents. The findings represented the spectral information related to carbohydrates, organic molecules, and amino acids from the water-soluble metabolites fraction and a series of fatty acid chains, lipids, and sterols from the lipid fraction. Our study underscores the benefit of combining NMR and GC–MS techniques to comprehensively understand microalgae metabolomes, including high and low metabolite concentrations and abundances.•In this study, we focused on optimizing the extraction procedure and combining NMR and GC–MS techniques to overcome the low NMR sensitivity and the different detected range limits of NMR and GC–MS.•We explored metabolome diversity in a tropical strain of the small cells’ diatom Cheatoceros tenuissimus.

Enhancing polarization transfer from nitrogen-vacancy centers to external nuclear spins via dangling bond mediators

The use of nitrogen-vacancy (NV) centers in diamond as a non-invasive platform for hyperpolarizing nuclear spins in molecular samples is a promising area of research with the potential to enhance the sensitivity of nuclear magnetic resonance (NMR) experiments. Transferring NV polarization out of the diamond structure has been achieved on nanoscale targets using dynamical nuclear polarization methods, but extending this polarization transfer to relevant NMR volumes poses significant challenges. One major technical hurdle is the presence of paramagnetic defects in the diamond surface which interfere with polarization outflow. However, these defects can be harnessed as intermediaries for the interaction between NVs and nuclear spins. We present a method that benefits from existing microwave sequences, namely the PulsePol, to transfer polarization efficiently and robustly using dangling bonds or other localized electronic spins, with the potential to increase polarization rates under realistic conditions.

Efficient Quantification of Milk Metabolites from 1H NMR Spectra Using the Signature Mapping (SigMa) Approach: Chemical Shift Library Development for Cows' Milk and Colostrum.

Cow milk contains essential nutrients for humans, and its bulk composition is usually analyzed using Fourier transform infrared spectroscopy. The higher sensitivity of nuclear magnetic resonance (NMR) spectroscopy can augment the extractible qualitative and quantitative information from milk to nearly 60 compounds, enabling us to monitor the health of cows and milk quality. Proton (1H) NMR spectroscopy produces complex spectra that require expert knowledge for identifying and quantifying metabolites. Therefore, an efficient and reproducible methodology is required to transform complex milk 1H NMR spectra into annotated and quantified milk metabolome data. In this study, standard operating procedures for screening the milk metabolome using 1H NMR spectra are developed. A chemical shift library of 63 milk metabolites was established and implemented in the open-access Signature Mapping (SigMa) software. SigMa is a spectral analysis tool that transforms 1H NMR spectra into a quantitative metabolite table. The applicability of the proposed methodology to whole milk, skim milk, and ultrafiltered milk is demonstrated, and the method is tested on ultrafiltered colostrum samples from dairy cows (n = 88) to evaluate whether metabolic changes in colostrum may reflect the metabolic status of cows.

Solid-state NMR MAS CryoProbe enables structural studies of human blood protein vitronectin bound to hydroxyapatite

The low sensitivity of nuclear magnetic resonance (NMR) is a major bottleneck for studying biomolecular structures of complex biomolecular assemblies. Cryogenically cooled probe technology overcomes the sensitivity limitations enabling NMR applications to challenging biomolecular systems. Here we describe solid-state NMR studies of the human blood protein vitronectin (Vn) bound to hydroxyapatite (HAP), the mineralized form of calcium phosphate, using a CryoProbe designed for magic angle spinning (MAS) experiments. Vn is a major blood protein that regulates many different physiological and pathological processes. The high sensitivity of the CryoProbe enabled us to acquire three-dimensional solid-state NMR spectra for sequential assignment and characterization of site-specific water-protein interactions that provide initial insights into the organization of the Vn-HAP complex. Vn associates with HAP in various pathological settings, including macular degeneration eyes and Alzheimer's disease brains. The ability to probe these assemblies at atomic detail paves the way for understanding their formation.

NMR spectroscopy of a 18O-labeled rhodium paddlewheel complex: Isotope shifts, 103Rh-103Rh spin-spin coupling, and 103Rh singlet NMR.

Despite the importance of rhodium complexes in catalysis, and the favorable 100% natural abundance of the spin-1/2 103Rh nucleus, there are few reports of 103Rh nuclear magnetic resonance (NMR) parameters in the literature. In part, this is the consequence of the very low gyromagnetic ratio of 103Rh and its dismal NMR sensitivity. In a previous paper [Harbor-Collins et al., J. Chem. Phys. 159, 104 307 (2023)], we demonstrated an NMR methodology for 1H-enhanced 103Rh NMR and demonstrated an application to the 103Rh NMR of the dirhodium formate paddlewheel complex. In this paper, we employ selective 18O labeling to break the magnetic equivalence of the 103Rh spin pair of dirhodium formate. This allows the estimation of the 103Rh-103Rh spin-spin coupling and provides access to the 103Rh singlet state. We present the first measurement of a 18O-induced 103Rh secondary isotope shift as well as the first instance of singlet order generated in a 103Rh spin pair. The field-dependence of 103Rh singlet relaxation is measured by field-cycling NMR experiments.

Novel Operando Nuclear Magnetic Resonance Approach for Tracking the Electrode State of Charge in Li/Na-Ion Batteries

Lithium and sodium-ion batteries have become the focal point of interest for the energy transition due to their promising applications for electric cars and energy grid storage. Operando characterization of batteries is critical to understand the degradation processes and increasing their electrochemical performance, especially in abusive conditions like during fast charges. Knowledge of the redox state of each electrode is essential to identify the origins of capacity loss in full batteries. Among the methods used for these investigations, operando Nuclear Magnetic Resonance (NMR) methods are promising since, without destroying the battery, they enable monitoring in real-time the electrochemical processes and the formation of short-lived metastable or reactive phases [1,2].Up to now, most operando NMR studies have focused on 7Li NMR spectroscopy to follow the lithiation and degradation processes in the solid electrodes of lithium-ion batteries. However, the large shifts and broadenings of the NMR spectra, which result from the redox-active paramagnetic ions (Ni2/3+, Co4+, Mn3/4+) or from the metallicity of the electrodes [3], complicate operando NMR spectra acquisition and interpretation for full batteries.Herein, we demonstrate that the 1H operando NMR signal of the liquid electrolyte solvent can be used to spy on the positive electrode evolution while benefitting from the high sensitivity of 1H liquid-state NMR compared to 7Li NMR. So far, operando NMR using the liquid electrolyte signal was mainly exploited to follow electrolyte decomposition [4] or to image indirectly dendrite formation [5]. Contrary to the lithium or sodium atoms composing the electrodes, hydrogen atoms in the electrolyte solvent are not a direct probe of the state of charge of the electrode. We demonstrate that the 1H NMR signal of the electrolyte molecules in the battery is, however, highly sensitive to the magnetic susceptibility (and therefore the redox state) of the neighboring particles of positive electrode active material.The state-of-charge (SOC) of the positive electrodes in the charging battery can be tracked indirectly through distortion in the spectrum of the dimethyl carbonate (DMC) solvent near the positive electrode. The effect of the other battery components such as current collectors, separators, or even negative electrodes is shown to be negligible compared to the perturbations induced by the positive electrode. We define specific descriptors to track the changes in the distorted 1H NMR spectrum of the battery and we correlate these changes with the state-of-charge of the positive electrode inside the battery as it is charged and discharged. This approach will enable measuring, operando, the redox state of positive electrodes in batteries, even when their 7Li signals cannot be detected by NMR. Exact knowledge of the redox state will contribute to a better exploitation of the electrochemical curves in full batteries.[1] Bagheri, K.; Deschamps, M.; Salager, E. Nuclear Magnetic Resonance for Interfaces in Rechargeable Batteries. Current Opinion in Colloid & Interface Science 2023, 64, 101675. https://doi.org/10.1016/j.cocis.2022.101675.[2] Liu, X.; Liang, Z.; Xiang, Y.; Lin, M.; Li, Q.; Liu, Z.; Zhong, G.; Fu, R.; Yang, Y. Solid‐State NMR and MRI Spectroscopy for Li/Na Batteries: Materials, Interface, and in Situ Characterization. Advanced Materials 2021, 33 (50), 2005878. https://doi.org/10.1002/adma.202005878.[3] Grey, C. P.; Dupré, N. NMR Studies of Cathode Materials for Lithium-Ion Rechargeable Batteries. Chemical Reviews 2004, 104 (10), 4493–4512. https://doi.org/10.1021/cr020734p.[4] Wiemers-Meyer, S.; Winter, M.; Nowak, S. NMR as a Powerful Tool to Study Lithium Ion Battery Electrolytes. Annual Reports on NMR Spectroscopy 2019, 121–162. https://doi.org/10.1016/bs.arnmr.2018.12.003.[5] Ilott, A. J.; Mohammadi, M.; Chang, H. J.; Grey, C. P.; Jerschow, A. Real-Time 3D Imaging of Microstructure Growth in Battery Cells Using Indirect MRI. Proceedings of the National Academy of Sciences 2016, 113 (39), 10779–10784. https://doi.org/10.1073/pnas.1607903113.

Dynamic Nuclear Polarization from Lithium Metal, a New Method to Study Lithium Batteries

The massive development of portable electronics, electric vehicles, and the increased need for energy storage require higher battery energy density, improved efficiency, and safety. In this context, lithium metal is the ultimate high-energy-density battery anode material. However, its use as an anode material is limited due to the formation of lithium dendrites that could lead to low efficiency and potential safety issues. Therefore, understanding and controlling the formation of lithium dendrites is key to realise lithium metal batteries.Here we show a new approach combining Scanning Electron Microscopy (SEM) and Magic-Angle Spinning Dynamic Nuclear Polarization (MAS DNP) to study the interplay between lithium morphology and interface reactivity. We aim to understand how the Solid-Electrolyte-Interphase (SEI), formed at the surface of lithium metal, affects lithium morphology. 1,2. Whereas the morphology of lithium dendrites can easily be identified using SEM, information about the SEI is more challenging to access. Among the different techniques used to characterize battery material, Nuclear Magnetic Resonance (NMR), has emerged as a powerful method providing information about the chemical composition as well as dynamic properties of a given material, at the atomic scale. Yet, the main limitations of NMR are its low intrinsic sensitivity and lack of selectivity which highly complicate the study of thin interphase as the SEI. In the present work, we use MAS DNP to overcome the low sensitivity of NMR. MAS DNP is based on the transfer of the large electron spin polarization of unpaired electrons to the nuclear spins, leading to the enhancement of the NMR signal intensity. However, the addition of free organic radicals solution to the typical exogenous DNP may alter the nature of the SEI. Furthermore, exogenous DNP is not selective to the interfaces between the lithium metal and the SEI. In this respect, we use the recently developed Lithium metal DNP method which exploits lithium metal's conduction electrons to perform endogenous MAS DNP and achieve one order of magnitude hyperpolarization at room temperature3. In addition to the gain of sensitivity, this technique allows to selectively enhance the chemical species close to the lithium metal providing critical information about the chemical structure of the SEI. This approach, currently under development, provides a powerful tool in research to control and prevent the formation of lithium dendrites which typically result in rapid degradation and potential safety issues. Figure: A) Schematic representation of Lithium dendrites with SEM of lithium dendrites formed on a copper current collector. B) Schematic representation of SEI formed on lithium metal with 7Li MAS DNP spectra recorded with and without microwave irradiation on lithium dendrites

Determination of self-diffusion coefficients in mixtures with benchtop 13C NMR spectroscopy via polarization transfer.

Nuclear magnetic resonance (NMR) is an established method to determine self-diffusion coefficients in liquids with high precision. The development of benchtop NMR spectrometers makes the method accessible to a wider community. In most cases, 1H NMR spectroscopy is used to determine self-diffusion coefficients due to its high sensitivity. However, especially when using benchtop NMR spectrometers for the investigation of complex mixtures, the signals in 1H NMR spectra can overlap, hindering the precise determination of self-diffusion coefficients. In 13C NMR spectroscopy, the signals of different compounds are generally well resolved. However, the sensitivity of 13C NMR is significantly lower than that of 1H NMR spectroscopy leading to very long measurement times, which makes diffusion coefficient measurements based on 13C NMR practically infeasible with benchtop NMR spectrometers. To circumvent this problem, we have combined two known pulse sequences, one for polarization transfer from 1H to the 13C nuclei (PENDANT) and one for the measurement of diffusion coefficients (PFG). The new method (PENPFG) was used to measure the self-diffusion coefficients of three pure solvents (acetonitrile, ethanol and 1-propanol) as well as in all their binary mixtures and the ternary mixture at various compositions. For comparison, also measurements of the same systems were carried out with a standard PFG-NMR routine on a high-field NMR instrument. The results are in good agreement and show that PENPFG is a useful tool for the measurement of the absolute value of the self-diffusion coefficients in complex liquid mixtures with benchtop NMR spectrometers.

Geophysical signatures of soil AFFF contamination from spectral induced polarization and low field nuclear magnetic resonance methods

Few field methods are available for characterizing source zones impacted with aqueous film forming foam (AFFF). Non-invasive geophysical characterization of AFFF source zone contamination in situ could assist with the delineation and characterization of these sites, allowing for more informed sampling regimes aimed at quantifying subsurface poly- and perfluoroalkyl substances (PFAS) contamination. We present initial results from the investigation of the sensitivity of two existing surface and borehole-deployable geophysical technologies, spectral induced polarization (SIP), and low field nuclear magnetic resonance (NMR), to soils impacted with AFFF. To investigate the sensitivity of these methods to AFFF-impacted soil, bench-scale column experiments were conducted on samples consisting of natural and synthetic soils and groundwater. While our findings do not show strong evidence of NMR sensitivity to soil PFAS contamination, we do find evidence that SIP has sufficient sensitivity to detect sorption of AFFF constituents (including PFAS) to soils. This finding is based on evidence that AFFF constituents associated with the pore surface produce a measurable polarization response in both freshly impacted synthetic soils and in soils historically impacted with AFFF. Our findings encourage further exploration of the SIP method as a technology for characterizing contaminant concentrations across AFFF source zones.

Approaches to NMR sensitivity enhancement based on theoretical analysis

Nuclear magnetic resonance (NMR) has been broadly investigated and applied in many industries (e.g., medical treatment, food safety and materials) as a powerful approach to explore the internal structure and composition of substances. However, the need for more sensitivity has been one of the most severe problems hindering the practical application of NMR. This paper suggests various approaches to deal with this defect, from adjusting factors based on the theoretical principle to the progressive hyperpolarization method. Classified by polarization sources, several representative sub-fields of hyperpolarization are further interpreted and analyzed, including Dynamic Nuclear Polarization (DNP), Optical Pumping (OP) and Parahydrogen Induced Polarization (PHIP). Based on the analysis and prospect of the aforementioned feasible methods, the main factors that restrict the sensitivity of NMR will be identified. Moreover, the prospects and new technologies brought by the methods based on different theoretical foundations have been considered to improve these factors and make NMR apply to a broader range of fields. Overall, these results not only indicate the current research status but also shed light on guiding further exploration of methods of enhancing NMR sensitivity and usability.

Large cross-effect dynamic nuclear polarisation enhancements with kilowatt inverting chirped pulses at 94 GHz

Dynamic nuclear polarisation (DNP) is a process that transfers electron spin polarisation to nuclei by applying resonant microwave radiation, and has been widely used to improve the sensitivity of nuclear magnetic resonance (NMR). Here we demonstrate new levels of performance for static cross-effect proton DNP using high peak power chirped inversion pulses at 94 GHz to create a strong polarisation gradient across the inhomogeneously broadened line of the mono-radical 4-amino TEMPO. Enhancements of up to 340 are achieved at an average power of a few hundred mW, with fast build-up times (3 s). Experiments are performed using a home-built wideband kW pulsed electron paramagnetic resonance (EPR) spectrometer operating at 94 GHz, integrated with an NMR detection system. Simultaneous DNP and EPR characterisation of other mono-radicals and biradicals, as a function of temperature, leads to additional insights into limiting relaxation mechanisms and give further motivation for the development of wideband pulsed amplifiers for DNP at higher frequencies.

SHARPER-DOSY: Sensitivity enhanced diffusion-ordered NMR spectroscopy

Since its discovery in mid-20th century, the sensitivity of Nuclear Magnetic Resonance (NMR) has increased steadily, in part due to the design of new, sophisticated NMR experiments. Here we report on a liquid-state NMR methodology that significantly increases the sensitivity of diffusion coefficient measurements of pure compounds, allowing to estimate their sizes using a much reduced amount of material. In this method, the diffusion coefficients are being measured by analysing narrow and intense singlets, which are invariant to magnetic field inhomogeneities. The singlets are obtained through signal acquisition embedded in short (<0.5 ms) spin-echo intervals separated by non-selective 180° or 90° pulses, suppressing the chemical shift evolution of resonances and their splitting due to J couplings. The achieved 10−100 sensitivity enhancement results in a 100−10000-fold time saving. Using high field cryoprobe NMR spectrometers, this makes it possible to measure a diffusion coefficient of a medium-size organic molecule in a matter of minutes with as little as a few hundred nanograms of material.

Dynamic Nuclear Polarization of Inorganic Halide Perovskites.

The intrinsic low sensitivity of nuclear magnetic resonance (NMR) experiments limits their utility for structure determination of materials. Dynamic nuclear polarization (DNP) under magic angle spinning (MAS) has shown tremendous potential to overcome this key limitation, enabling the acquisition of highly selective and sensitive NMR spectra. However, so far, DNP methods have not been explored in the context of inorganic lead halide perovskites, which are a leading class of semiconductor materials for optoelectronic applications. In this work, we study cesium lead chloride and quantitatively compare DNP methods based on impregnation with a solution of organic biradicals with doping of high-spin metal ions (Mn2+) into the perovskite structure. We find that metal-ion DNP provides the highest bulk sensitivity in this case, while highly surface-selective NMR spectra can be acquired using impregnation DNP. The performance of both methods is explained in terms of the relaxation times, particle size, dopant concentration, and surface wettability. We envisage the future use of DNP NMR approaches in establishing structure-activity relationships in inorganic perovskites, especially for mass-limited samples such as thin films.

Ultrafast Fragment Screening Using Photo-Hyperpolarized (CIDNP) NMR.

While nuclear magnetic resonance (NMR) is regarded as a reference in fragment-based drug design, its implementation in a high-throughput manner is limited by its lack of sensitivity resulting in long acquisition times and high micromolar sample concentrations. Several hyperpolarization approaches could, in principle, improve the sensitivity of NMR also in drug research. However, photochemically induced dynamic nuclear polarization (photo-CIDNP) is the only method that is directly applicable in aqueous solution and agile for scalable implementation using off-the-shelf hardware. With the use of photo-CIDNP, this work demonstrates the detection of weak binders in the millimolar affinity range using low micromolar concentrations down to 5 μM of ligand and 2 μM of target, thereby exploiting the photo-CIDNP-induced polarization twice: (i) increasing the signal-to-noise by one to two orders in magnitude and (ii) polarization-only of the free non-bound molecule allowing identification of binding by polarization quenching, yielding another factor of hundred in time when compared with standard techniques. The interaction detection was performed with single-scan NMR experiments of a duration of 2 to 5 s. Taking advantage of the readiness of photo-CIDNP setup implementation, an automated flow-through platform was designed to screen samples at a screening rate of 1500 samples per day. Furthermore, a 212 compounds photo-CIDNP fragment library is presented, opening an avenue toward a comprehensive fragment-based screening method.

Solid-Effect Dynamic Nuclear Polarization in Viscous Liquids at 9.4 T Using Narrow-Line Polarizing Agents.

Dynamic nuclear polarization (DNP) is a hyperpolarization method that is widely used for increasing the sensitivity of nuclear magnetic resonance (NMR) experiments. DNP is efficient in solid-state and liquid-state NMR, but its implementation in the intermediate state, namely, viscous media, is still less explored. Here, we show that a 1H DNP enhancement of over 50 can be obtained in viscous liquids at a magnetic field of 9.4 T and a temperature of 315 K. This was accomplished by using narrow-line polarizing agents in glycerol, both the water-soluble α,γ-bisdiphenylen-β-phenylallyl (BDPA) and triarylmethyl radicals, and a microwave/RF double-resonance probehead. We observed DNP enhancements with a field profile indicative of the solid effect and investigated the influence of microwave power, temperature, and concentration on the 1H NMR results. To demonstrate potential applications of this new DNP approach for chemistry and biology, we show hyperpolarized 1H NMR spectra of tripeptides, triglycine, and glypromate, in glycerol-d8.

Microwave-free J-driven dynamic nuclear polarization: A proposal for enhancing the sensitivity of solution-state NMR.

J-driven dynamic nuclear polarization (JDNP) was recently proposed for enhancing the sensitivity of solution-state nuclear magnetic resonance (NMR), while bypassing the limitations faced by conventional (Overhauser) DNP at magnetic fields of interest in analytical applications. Like Overhauser DNP, JDNP also requires saturating the electronic polarization using high-frequency microwaves known to have poor penetration and associated heating effects in most liquids. The present microwave-free JDNP (MF-JDNP) proposal seeks to enhance solution NMR's sensitivity by shuttling the sample between higher and lower magnetic fields, with one of these fields providing an electron Larmor frequency that matches the interelectron exchange coupling J_{ex}. If spins cross this so-called JDNP condition sufficiently fast, we predict that a sizable nuclear polarization will be created without microwave irradiation. This MF-JDNP proposal requires radicals whose singlet-triplet self-relaxation rates are dominated by dipolar hyperfine relaxation, and shuttling times that can compete with these electron relaxation processes. This paper discusses the theory behind the MF-JDNP, as well as proposals for radicals and conditions that could enable this new approach to NMR sensitivity enhancement.

Large 31P-NMR enhancements in liquid state dynamic nuclear polarization through radical/target molecule non-covalent interaction.

Dynamic nuclear polarization (DNP) is a method to enhance the low sensitivity of nuclear magnetic resonance (NMR) via spin polarization transfer from electron spins to nuclear spins. In the liquid state, this process is mediated by fast modulations of the electron-nuclear hyperfine coupling and its efficiency depends strongly on the applied magnetic field. A peculiar case study is triphenylphosphine (PPh3) dissolved in benzene and doped with BDPA radical because it gives 31P-NMR signal enhancements of two orders of magnitude up to a magnetic field of 14.1 T. Here we show that the large 31P enhancements of BDPA/PPh3 in benzene at 1.2 T (i) decrease when the moieties are dissolved in other organic solvents, (ii) are strongly reduced when using a nitroxide radical, and (iii) vanish with pentavalent 31P triphenylphosphine oxide. Those experimental observations are rationalized with numerical calculations based on density functional theory that show the tendency of BDPA and PPh3 to form a weak complex via non-covalent interaction that leads to large hyperfine couplings to 31P (ΔAiso ≥ 13 MHz). This mechanism is hampered in other investigated systems. The case study of 31P-DNP in PPh3 is an important example that extends the current understanding of DNP in the liquids state: non-covalent interactions between radical and target can be particularly effective to obtain large NMR signal enhancements.

Lenz Lenses in a Cryoprobe: Boosting NMR Sensitivity Toward Environmental Monitoring of Mass-Limited Samples.

Nuclear magnetic resonance (NMR) spectroscopy is commonly employed in a wide range of metabolomic research. Unfortunately, due to its relatively low sensitivity, smaller samples become challenging to study by NMR. Cryoprobes can be used to increase sensitivity by cooling the coil and preamplifier, offering sensitivity improvements of ∼3 to 4x. Alternatively, microcoils can be used to increase mass sensitivity by improving sample filling and proximity, along with decreased electrical resistance. Unfortunately, combining the two approaches is not just technically challenging, but as the coil decreases, so does its thermal fingerprint, reducing the advantage of cryogenic cooling. Here, an alternative solution is proposed in the form of a Lenz lens inside a cryoprobe. Rather than replacing the detection coil, Lenz lenses allow the B1 field from a larger coil to be refocused onto a much smaller sample area. In turn, the stronger B1 field at the sample provides strong coupling to the cryocoil, improving the signal. By combining a 530 I.D. Lenz lens with a cryoprobe, sensitivity was further improved by 2.8x and 3.5x for 1H and 13C, respectively, over the cryoprobe alone for small samples. Additionally, the broadband nature of the Lenz lenses allowed multiple nuclei to be studied and heteronuclear two-dimensional (2D) NMR approaches to be employed. The sensitivity improvements and 2D capabilities are demonstrated on 430 nL of hemolymph and eight eggs (∼350 μm O.D.) from the model organismDaphnia magna. In summary, combining Lenz lenses with cryoprobes offers a relatively simple approach to boost sensitivity for tiny samples while retaining cryoprobe advantages.

Through-Space Multinuclear Magnetic Resonance Signal Enhancement Induced by Parahydrogen and Radiofrequency Amplification by Stimulated Emission of Radiation.

Hyperpolarized (i.e., polarized far beyond the thermal equilibrium) nuclear spins can result in the radiofrequency amplification by stimulated emission of radiation (RASER) effect. Here, we show the utility of RASER to amplify nuclear magnetic resonance (NMR) signals of solute and solvent molecules in the liquid state. Specifically, parahydrogen-induced RASER was used to spontaneously enhance nuclear spin polarization of protons and heteronuclei (here 19F and 31P) in a wide range of molecules. The magnitude of the effect correlates with the T1 relaxation time of the target nuclear spins. A series of control experiments validate the through-space dipolar mechanism of the RASER-assisted polarization transfer between the parahydrogen-polarized compound and to-be-hyperpolarized nuclei of the target molecule. Frequency-selective saturation of the RASER-active resonances was used to control the RASER and the amplitude of spontaneous polarization transfer. Spin dynamics simulations support our experimental RASER studies. The enhanced NMR sensitivity may benefit various NMR applications such as mixture analysis, metabolomics, and structure determination.