Screw Pullout Research Articles

Is Proximal Triangular Fixation Better than the Conventional Method in Adult Spinal Deformity Surgery?

In adult spinal deformity (ASD) surgery, one of the key factors working to prevent proximal junctional kyphosis is the proximal anchor. The aim of this study was to compare clinical and radiographic outcomes of triangular fixation with conventional fixation as proximal anchoring techniques in ASD surgery. We retrospectively evaluated 54 patients who underwent corrective spinal fusion for ASD. Fourteen patients underwent proximal triangular fixation (Group T; average 74.6 years), and 40 patients underwent the conventional method (Group C; average 70.5 years). Clinical and radiographic outcomes were assessed using visual analogue scale (VAS) values for back pain and the Oswestry disability index (ODI). Radiographic evaluation was also collected preoperatively and postoperatively. Surgical times and intraoperative blood loss of the two groups were not significantly different (493 vs 490 min, 1,260 vs 1,173 mL). Clinical outcomes such as VAS and ODI were comparable in the two groups. Proximal junctional kyphosis in group T was slightly lower than that of group C (28.5% vs 47.5%, p=0.491). However, based on radiology, proximal screw pullout occurred significantly less frequently in the triangular fixation group than the conventional group (0.0% vs 22.5%, p=0.049). Clinical outcomes in the two groups were not significantly different.

‘Armed kyphoplasty’ with posterior stabilization avoids corpectomy in complex thoracolumbar spine fractures: a case series

BackgroundComplex thoracolumbar fractures require reduction and stabilization. Posterior instrumentation alone and standard cement augmentation may represent undertreatment, while corpectomy has significant morbidity. In a series of unstable thoracolumbar fractures, we...

The application of gradually expanding pedicle technology in the placement of screws in thinner pedicle of patients with idiopathic scoliosis.

To propose a technique of gradual expansion of pedicle diameter to place screws on the thinner pedicle that is difficult to place screws in scoliosis orthopedic surgery, in order to place thicker pedicle screws in the premise of good safety to achieve good stability and orthopaedic effect. The authors reviewed that 36 patients with Adolescent idiopathic scoliosis (AIS) (20 females, 16 males) in our department from June 2020 to March 2024 underwent posterior spinal correction and internal fixation were enrolled in the present study. 194 pedicles had narrower diameter ranging from 0 mm to 4.5 mm. After analysis, 155 pedicles (internal diameter: 2.5 mm-4.5 mm) were treated with gradually expanding pedicles technology. The angle between the inserted screws and the upper endplate of the vertebral body was measured 1 week after operation and 3 months after operation to evaluate the placement of the screws after pedicle expansion. All operations were completed without dura mater rupture, nerve root injury, infection and poor incision healing. There was no screw breaking or screw pull-out in DR film at 3 months after operation compared with 1 week after operation. There was no significant difference in the angle between screw and upper endplate measured by the three observers at 3 months and 1 week after operation (Wilcoxon's signed rank test, p > 0.05). In the measurement at 1 week or 3 months after operation, there was no statistically significant difference among the three observers. There is a good consistency between the observers (Cronbach's alpha > 0.80). In AIS patients, the thinner pedicle with a diameter range of 2.5 mm to 4.5 mm can be safely inserted with relatively thicker pedicle screws after gradually expanding pedicle technology.

Laboratory and in-situ mechanical characterisation of masonry components by comparing destructive and minor destructive testing techniques

The safeguard of existing masonry buildings requires a meticulous characterisation of the component materials (units and mortar) by using in-situ minimally intrusive techniques. This need is especially prominent in the case of heritage buildings in order to minimize their damage and alteration. This paper presents a research on some minor destructive techniques (MDT) for the in-situ evaluation of the mechanical properties of masonry components. In the research, the results derived from MDT were empirically correlated with the compressive strength obtained by using well-known destructive testing (DT) techniques executed in the laboratory. The experimental campaign focused on two different MDT techniques, namely the Pin Penetration Test (PPT) and the Helix screw Pull-out Test (HPT). The PPT is based on the measurement of the depth of penetration of a steel pin. The HPT is based on the measurement of the pull-out load necessary to extract a steel tie inserted into a hole drilled in a brick or in a mortar joint. The experimental campaign also included an evaluation of the Double Punch Test (DPT) by comparison with strength values obtained from mortar specimens prepared and tested following the standard EN 1015–11. The experimental results show a satisfactory agreement between the MDT measurements and the compressive strength obtained with DT. Although both the PPT and HPT are useful for the evaluation of the compressive strength of masonry components, the former exhibits a lower scattering in the experimental measurements.

Do Pedicle Screws That Terminate in the Costovertebral Joint Compromise Proximal Anchor Fixation in a Dual Growing Rod Construct?

Growing rods (GRs) are used to treat early-onset scoliosis (EOS) recalcitrant to bracing and casting. Proximal anchor pullout, a known complication of GR constructs, can result in spinal cord injury if pedicle screw anchors are placed with a lateral-to-medial trajectory. To mitigate this risk, a more straightforward and potentially safer trajectory may result in screws that terminate within the costovertebral joint (CVJ). We asked, how often does CVJ placement occur and does this technique increase the rate of failure in GR constructs? We retrospectively reviewed 35 patients with EOS treated with dual GR with >2-year follow-up excluding patients with skeletal dysplasia or history of previous posterior instrumentation. Patient demographics, radiographic parameters, and implant constructs were assessed. Of patients meeting the inclusion criteria, 18/35 (51%) were females with an average age of 7.96 (range: 4.0 to 15.2) years at surgery with a follow-up of 3.7 (range: 2.0 to 7.7) years. Five (14%) patients had idiopathic EOS, 5 (14%) had congenital EOS, 12 (34%) had neuromuscular EOS, 10 (29%) had syndromic scoliosis, and 3 (9%) had another etiology for EOS. Among 195 proximal pedicle screws placed, 19 (10%) terminated within the CVJ, and 13 patients (37%) had at least 1 CVJ screw. Two patients (6%) experienced unilateral proximal pullout. In both patients, the anchors on the affected side included 1 of 2 screws within the CVJ. Both patients had constructs that included 2 screws on the side that pulled out and 3 screws on the side that did not. None of the remaining 17 CVJ screws led to implant failure. Pedicle screw placement within the CVJ is common and does not appear to significantly contribute to proximal screw pullout; however, it may contribute to unilateral implant failure in constructs employing only 2 proximal screws, where 1 of those 2 screws terminates within the CVJ. Construct modifications should be considered in this scenario. Level III.

Biomechanical effects of osteoporosis severity on the occurrence of proximal junctional kyphosis following long-segment posterior thoracolumbar fusion

BackgroundProximal junctional kyphosis is a common long-term complication in adult spinal deformity surgery that involves long-segment posterior spinal fusion. However, the underlying biomechanical mechanisms of the impact of osteoporosis on proximal junctional kyphosis remain unclear. The present study was to evaluate adjacent segment degeneration and spine mechanical instability in osteoporotic patients who underwent long-segment posterior thoracolumbar fusion. MethodsFinite element models of the thoracolumbar spine T1-L5 with posterior long-segment T8-L5 fusion under different degrees of osteoporosis were constructed to analyze intervertebral disc stress characterization, vertebrae mechanical transfer, and pedicle screw system loads during various motions. FindingsCompared with normal bone mass, the maximum von Mises stresses of T7 and T8 were increased by 20.32%, 22.38%, 44.69%, 4.49% and 29.48%, 17.84%, 40.95%, 3.20% during flexion, extension, lateral bending, and axial rotation in the mild osteoporosis model, and by 21.21%, 18.32%, 88.28%, 2.94% and 37.76%, 15.09%, 61.47%, −0.04% in severe osteoporosis model. The peak stresses among T6/T7, T7/T8, and T8/T9 discs were 14.77 MPa, 11.55 MPa, and 2.39 MPa under lateral bending conditions for the severe osteoporosis model, respectively. As the severity of osteoporosis increased, stress levels on SCR8 and SCR9 intensified during various movements. InterpretationOsteoporosis had an adverse effect on proximal junctional kyphosis. The stress levels in cortical bone, intervertebral discs and screws were increased with bone mass loss, which can easily lead to intervertebral disc degeneration, bone destruction as well as screw pullout. These factors have significantly affected or accelerated the occurrence of proximal junctional kyphosis.

Cyclic Stability of Locking Plate Augmented with Intramedullary Polymethyl Methacrylate (PMMA) Strut Fixation for Osteoporotic Humeral Fractures: A Biomechanical Study.

The locking plate may provide improved fixation in osteoporotic bone; however, it has been reported to fail due to varus collapse or screw perforation of the articular surface, especially in osteoporotic bone with medial cortex comminution. Using bone graft as an intramedullary strut together with plate fixation may result in a stronger construct. However, the drawbacks of bone grafts include limited supply, high cost, and infection risk. PMMA (so-called bone cement) has been widely used for implant fixation due to its good mechanical properties, fabricability, and biocompatibility. The risk of donor-site infection and the drawbacks of allografting may be overcome by considering PMMA struts as alternatives to fibular grafts for humeral intramedullary grafting surgeries. However, the potential effects of intramedullary PMMA strut on the dynamic behaviour of osteoporotic humerus fractures remain unclear. This study aimed to investigate the influence of an intramedullary PMMA strut on the stability of unstable proximal humeral fractures in an osteoporotic synthetic model. Two fixation techniques, a locking plate alone (non-strut group) and the same fixation augmented with an intramedullary PMMA strut (with-strut group), were cyclically tested in 20 artificial humeral models. Axially cyclic testing was performed to 450 N for 10,000 cycles, intercyclic motion, cumulated fragment migration, and residual deformation of the constructs were determined at periodic cyclic intervals, and the groups were compared. Results showed that adding an intramedullary PMMA strut could decrease 1.6 times intercyclic motion, 2 times cumulated fracture gap migration, and 1.8 times residual deformation from non-strut fixation. During cycling, neither screw pull-out, cut-through, nor implant failure was observed in the strut-augmented group. We concluded that the plate-strut mechanism could enhance the cyclic stability of the fixation and minimize the residual displacement of the fragment in treating osteoporotic proximal humeral unstable fractures. The PMMA strut has the potential to substitute donor bone and serve as an intramedullary support when used in combination with locking plate fixation. The intramedullary support with bone cement can be considered a solution in the treatment of osteoporotic proximal humeral fractures, especially when there is medial comminution.

Percutaneous Juxtapedicular Cement Salvage of Failed Spinal Instrumentation? Institutional Experience and Cadaveric Biomechanical Study.

Instrumented spinal fusion constructs sometimes fail because of fatigue loading, frequently necessitating open revision surgery. Favorable outcomes after percutaneous juxtapedicular cement salvage (perc-cement salvage) of failing instrumentation have been described; however, this approach is not widely known among spine surgeons, and its biomechanical properties have not been evaluated. We report our institutional experience with perc-cement salvage and investigate the relative biomechanical strength of this technique as compared with 3 other common open revision techniques. A retrospective chart review of patients who underwent perc-cement salvage was conducted. Biomechanical characterization of revision techniques was performed in a cadaveric model of critical pedicle screw failure. Three revision cohorts involved removal and replacement of hardware: (1) screw upsizing, (2) vertebroplasty, and (3) fenestrated screw with cement augmentation. These were compared with a cohort with perc-cement salvage performed using a juxtapedicular trajectory with the failed primary screw remaining engaged in the vertebral body. Ten patients underwent perc-cement salvage from 2018 to 2022 to address screw haloing and/or endplate fracture threatening construct integrity. Pain palliation was reported by 8/10 patients. Open revision surgery was required in 4/10 patients, an average of 8.9 months after the salvage procedure (range 6.2-14.7 months). Only one revision was due to progressive hardware dislodgement. The remainder avoided open revision surgery through an average of 1.9 years of follow-up. In the cadaveric study, there were no significant differences in pedicle screw pullout strength among any of the revision cohorts. Perc-cement salvage of failing instrumentation is reasonably efficacious. The technique is biomechanically noninferior to other revision strategies that require open surgery for removal and replacement of hardware. Open revision surgery may be avoided by perc-cement salvage in select cases.

Application of cement-augmented pedicle screws in elderly patients with spinal tuberculosis and severe osteoporosis: a preliminary study.

Surgical management of elderly patients with spinal tuberculosis and severe osteoporosis is challenging. Cement-augmented pedicle screws (CAPS) have been specifically designed for elderly patients with osteoporotic spines. Herein, we investigated the feasibility of CAPS applied in elderly patients with spinal tuberculosis and severe osteoporosis. We retrospectively analyzed data of patients with spinal tuberculosis and severe osteoporosis between January 2017 and January 2021. Surgical data, including surgical duration and intraoperative blood loss, were recorded. Radiological parameters, such as correction of regional kyphotic angle and screw loosening, were also evaluated. Additionally, visual analog scores (VAS) and Oswestry disability index (ODI) were used to evaluate back pain and functional recovery, respectively. Erythrocyte sedimentation (ESR) and C-reactive protein (CRP) concentrations were detected to assess tuberculosis activity. The presence of complications and fusion rate was also assessed. A total of 15 patients were included in this study. The surgical duration was 263.0 ± 56.2min, with an average blood loss of 378.7 ± 237.0ml. The correction of regional kyphotic angle was 12.4° ± 15.0°, and it was well maintained until the final follow-up. The mean VAS decreased from 6.0 ± 1.2 points to 0.5 ± 0.6 points, and ODI reduced from 37.8% ± 7.6% to 8.3% ± 2.8% (P < 0.01). At the final follow-up, ESR and CRP levels were within normal range. Bony fusion occurred in all patients, with an average fusion duration of 8.8 ± 1.5months. No cases of pedicle screw pullout, screw loosening, or pseudoarthrosis occurred. Tuberculosis recurrence and dissemination were not observed during the follow-ups. CAPS fixation is an effective and safe technique to achieve solid fixation and favorable clinical outcomes in elderly patients with spinal tuberculosis and severe osteoporosis.

Do Intramedullary Screws Provide Adequate Fixation for Humeral and Ulnar Components in Total Elbow Arthroplasty? A Cadaveric Analysis

The objective of this study was to determine the structural properties of the cadaver bone-screw interface for cementless intramedullary screw fixation in the context of total elbow arthroplasty. The intramedullary canals of seven humerus and seven ulna specimens from fresh-frozen cadavers were drilled using custom drill bits until the inner cortex was reached and then hand tapped for the corresponding thread size. Titanium screws were advanced into the tapped holes until securely seated. The bones were potted and then mounted on a uniaxial material testing machine. A tensile load was applied, and end-of-test elongation, failure load, energy absorbed, and stiffness were determined. End-of-test load and elongation were defined as the elongation and load experienced by the structure at 3,000 N or failure. Each specimen was inspected for evidence of pullout, loosening, or visible fractures. The end-of-test load and elongation for the humerus specimens were 2721 ± 738 N and 3.0 ± 0.9 mm, respectively. The ulna specimens reached 92% of the humerus specimens' end-of-test load at 2,514± 678 N and 120% of their end-of-test elongation (3.6 ± 0.6 mm). The stiffness of the humerus specimens was 1,077 ± 336 N/mm, which was 1.3 times greater than the stiffness of the ulna specimens (790 ± 211 N/mm). Lastly, the energy absorbed by the humerus samples was 3.6 ± 1.6 J, which was 92% of the energy absorbed by the ulna samples at 3.9 ± 1.1 J. One humerus and three ulnas failed before the end-of-test load of 3,000 N. Two failures were caused by screw pullout and two by bone fracture. Our findings demonstrate that intramedullary screw fixation is successful in withstanding forces that are greater than required for osseointegration. Uncemented fixation may be beneficial in elbow arthroplasty.

Minimally Invasive Surgery Strategies to Prevent Proximal Junctional Kyphosis.

Proximal junctional kyphosis (PJK) is a common complication following long-segment thoracolumbar fusions for patients with adult spinal deformities. PJK is described as a progressive kyphosis at the upper instrumented vertebra or 1 or 2 segments adjacent to the instrumented vertebra. This condition can lead to proximal junction failure, which results in vertebral body fractures, screw pullouts, and neurological deficits. Revision surgery is necessary to address symptomatic PJK. Research efforts have been dedicated to elucidating risk factors and prevention strategies. It has been postulated that minimally invasive surgery (MIS) techniques may help prevent PJK because these techniques aim to preserve the soft tissue integrity at the top of the construct and maintain posterior element support. In this article, the authors define PJK, describe MIS strategies to prevent PJK, and compare PJK rates after MIS with PJK rates after open approaches for long-segment thoracolumbar fusion.

Pedicle subtraction metallectomy with complex posterior reconstruction for fixed cervicothoracic kyphosis: illustrative case.

Iatrogenic cervical deformity is a devastating complication that can result from a well-intended operation but a poor understanding of the individual biomechanics of a patient's spine. Patient factors, such as bone fragility, high T1 slope, and undiagnosed myopathies often play a role in perpetuating a deformity despite an otherwise successful surgery. This imbalance can lead to significant morbidity and a decreased quality of life. A 55-year-old male presented to the authors' clinic with a chin-to-chest deformity and cervical myelopathy. He previously had an anterior C2-T2 fixation and a posterior C1-T6 instrumented fusion. He subsequently developed screw pullout at multiple levels, so the original surgeon removed all of the posterior hardware. The T1 cage (original corpectomy) severely subsided into the body of T2, generating an angular kyphosis that eventually developed a rigid osseous circumferential union at the cervicothoracic junction with severe cord compression. An anterior approach was not feasible; therefore, a 3-column osteotomy/fusion in the upper thoracic spine was planned whereby 1 of the T2 screws would need to be removed from a posterior approach for the reduction to take place. This case highlights the devastating effect of a hardware complication leading to a fixed cervical spine deformity and the complex decision making involved to safely correct the challenging deformity and restore function.

Finite Element Analysis of Cortical Bone Trajectory Screw Resistance to Pullout During Exposure to Different Cortical Layers Based on AbaqusCEA Software.

To investigate the maximum anti-pullout force and stress distribution of cortical bone trajectory (CBT) screws during screw pullout after contacting different cortical bone layers by finite element analysis (FEA) based on Abaqus software, and to provide evidence for increasing screw holding force during CBT screw implantation in clinical practice. Based on the plain CT data of lumbar spine of a healthy male volunteer who visited the Fourth People's Hospital of Guiyang in June 2022, and the standard screw parameters according to cortical bone trajectory screws. A three-dimensional model of L4 vertebral body and CBT screw was established. The diagnostic criteria of osteoporosis by quantitative CT of lumbar spine in China were set as 120mg/cm3 low bone mass model. According to the number of contact layers between screws and cortical bone, the models were divided into group A: CBT screws produced one layer of cortical bone contact with the vertebral body (screw implantation point); group B: CBT pedicle screws produced two layers of cortical bone contact with the vertebral body (screw implantation point + pedicle inner edge); group C: CBT pedicle screws produced three layers of cortical bone contact with the vertebral body (screw implantation point + pedicle inner edge + outer edge of the vertebral body); group D: CBT pedicle screws produced four layers of cortical bone contact with the vertebral body (screw implantation point + pedicle upper wall + pedicle lateral wall + upper edge of the vertebral body); group E: CBT pedicle screws produced five layers of cortical bone contact with the vertebral body (screw implantation point + pedicle posteromedial medial wall + anterolateral wall of the pedicle + upper edge of the vertebral body + outer edge of the vertebral body). According to the reference, after the material assignment was completed, the axial pullout force experiment of screws was simulated on Abaqus CEA engineering software for five groups of finite element models established to observe the maximum axial pullout force of each group of models and the stress distribution of screws and vertebral bodies. For the comparative analysis between each group of models corresponding to the measured data, one-way analysis of variance was used. The stress of cancellous bone failure in finite element model of group E was (8.6 ± 0.9), (8.4 ± 0.9), (8.1 ± 0.9), (8.3 ± 0.8), and (8.8 ± 0.7) MPa, respectively, and there was no significant difference between any group (P > 0.05); the maximum principal stress in the tail of screw was (195.1 ± 35.8), (290.9 ± 32.1), (317.3 ± 44.5), (396.3 ± 51.2), and (526.5 ± 53.1) MPa, respectively, and the stress in cortical bone destruction was (40.6 ± 3.5), (52.6 ± 4.2), (89.4 ± 4.9), (109.0 ± 8.3), and (129.4 ± 6.4) MPa, respectively, and there was significant difference between any group (P < 0.05); the maximum axial pullout force in group A-E was (1890.5 ± 45.0), (1913.4 ± 53.8), (2371.0 ± 108.3), (237.2 ± 43.0), and (119.5 ± 43.0), respectively. The increases were 2%, 16%, 5%, and 7%. There were significant differences between each group and group E (P < 0.05). Axial pullout force increases as the number of contact layers between CBT screws and cortical bone increases. The axial pullout force increases most when the cortical trajectory screw contacts the vertebral body with three layers of cortical bone, and reaches the maximum value when the number of contact layers reaches five layers, regardless of the screw tail stress and the maximum axial pullout force, so it is clinically desirable to make the screw contact more than three layers of cortical bone to obtain higher stability during screw implantation, improve screw stability, and increase the surgical fusion rate.

Evaluation of the Relationship of Screw Pullout and Plate Fracutre in Fixation of Mandible Condyle Fractures: A Mechanistic Study.

The mandible is the most injured part of the facial skeleton, and 25-40% of mandibular fractures involve the condyle process. The aim of this study is to answer the question of the relationship between screw pullout and/or plate fracture during osteosynthesis. We tested polyurethane models of mandibles whose condylar process was cut (simulating a fracture) and fused using plates and screws. A total of 672 plates were tested. A total of 25.6% of them were fractured during the test, with most being fractures of the base of the condyle. More screws (81.97%) are pulled out from the ramus than from the condyle-69.15%. The gold standard in the osteosynthesis of condylar fractures is two straight plates. Other than these, there is no one-size-fits-all plate for every type of fracture. Plates fixed with fewer screws (smaller plates used in higher-lying fractures) are more likely to result in screw pullout. On the other hand, in plates fixed with more screws, plate fracture is more common.

Instrumented Versus Uninstrumented Posterolateral Fusion for Lumbar Spondylolisthesis: A Randomized Controlled Trial.

In Scandinavia, spinal fusion is frequently performed without instrumentation, as use of instrumentation in the elderly can be complicated by poor bone quality and the risk of screw pull-out. However, uninstrumented fusion carries the risk of nonunion. We performed a randomized controlled trial in an attempt to determine if use of instrumentation leads to better outcomes and fusion rates when spinal fusion is performed for degenerative spondylolisthesis in the elderly. This was a randomized, single-center, open-label trial of patients with symptomatic single-level degenerative spondylolisthesis who were assigned 1:1 to decompression and fusion with or without instrumentation after at least 12 weeks of nonoperative treatment had failed. The primary outcome was the change in the Oswestry Disability Index (ODI), and secondary outcomes included fusion rates within 1 year, reoperation rates within 2 years, and changes in the EuroQol-5 Dimension-3 Level (EQ-5D) score. Fifty-four subjects were randomized to each of the 2 groups, which had similar preoperative demographic and surgical characteristics. We found similar improvements in the ODI (p = 0.791), back pain, leg pain, and quality of life between groups at 1 and 2 years of follow-up. Solid fusion on computed tomography (CT) scans was noted in 94% of the patients in the instrumented group and 31% in the uninstrumented group (p < 0.001). One patient (2%) in the instrumented group and 7 (13%) in the uninstrumented group (p = 0.031) had a reoperation within 2 years after the index surgery. We found no difference in patient-reported outcomes when we compared instrumented with uninstrumented fusion in patients with degenerative spondylolisthesis. The uninstrumented group had a significantly higher rate of nonunion and reoperations at 2 years. Therapeutic Level I . See Instructions for Authors for a complete description of levels of evidence.

Biomechanical comparison of compact versus standard flute drill bits, and interlocking versus buttress thread self-tapping cortical bone screws in cadaveric equine third metacarpal condyle.

To compare (1) performance of compact versus standard flute drill bits, (2) screw insertion properties and (3) pullout variables between interlocking thread (ITS) and buttress thread (BTS) self-tapping screws in third metacarpi. In vitro experimental study. Paired third metacarpi from 11 Thoroughbreds aged 2-4 years. Screws were inserted into the lateral condylar fossae following bone preparation using the respective drill bit for each screw type. Screw pullout was achieved using a mechanical testing system. Density and porosity of bone surrounding screw holes was measured with microcomputed tomography following each pullout test. Drilling, screw insertion and pullout variables were compared between drill bit and screw types using repeated measures ANOVA. Linear regression analyses were used to characterize relationships between bone tissue properties and drill bit and screw outcomes. Maximum torque power spectral density (PSD) was lower for compact flute drill bits. Insertion torque was 50% higher for ITS. BTS had 33% greater preyield stiffness and 7% greater mean yield force. Bone tissue properties affected measured variables similarly for both screw and drill bit types. Lower torque PSD may increase durability of the compact flute drill bit. ITS had greater insertional torque, which may reflect greater bone engagement. BTS had greater resistance to axial pullout forces. Metacarpal bone provides a simple model for comparison of drill bit and screw designs. Use of ITS to repair equine fractures subject to predominantly tensile forces is not justified based on the results of this study.

Failure of humeral shaft fixation: construct characteristics.

Fixation failure following open reduction and internal fixation (ORIF) of humeral shaft fractures can be a challenging complication. We aimed to identify the modes of failure and characteristics of failed fixation constructs. We queried our institutional database for patients > 18years old with fixation failure after ORIF with single plate and screw constructs of humeral shaft fractures from 2006 to 2017. Demographics, fracture characteristics, fixation construct design and mode of failure were recorded. Twenty-three failures were identified. Mean age was 55.9years (SD 19.2years) with 15 (65%) women. Twelve patients (52%) had midshaft fractures; the remainder had distal-third shaft (8 pts, 35%) or proximal-third shaft (3 pts, 13%) fractures. Midshaft fractures were most commonly fixed through an anterolateral approach with plates and all non-locking screws (83%), while distal-third shaft fractures were fixed with a combination of locking and non-locking screws from a posterior approach. Distal-third shaft fractures failed by plate breakage (63%) or screw pullout (38%) and all midshaft failures occurred by screw pullout proximal (92%) or distal (8%) to the fracture. Resultant varus deformity occurred in 20 (87%) fractures. Screw pullout in midshaft fractures suggests that fixation to bone was insufficient or biomechanically disadvantageous. Varus moments contribute significantly to the failure of humeral shaft fracture ORIF. Plate breakage in distal fractures suggests high concentrations of stress over a narrow working length of constructs with inadequate plate strength. Recognizing how these constructs fail can aid proper implant selection and application for humeral shaft fracture. Treatment level IV.

Biomechanical evaluation of pedicle screw stability after 360-degree turnback from full insertion: effects of screw shape, pilot hole profile and bone density.

Intraoperative pedicle screw depth adjustment after initial insertion, including both forward and backward adjustments, is sometimes necessary to facilitate rod application and ensure that the screw is in the correct position, which is determined by intraoperative fluoroscopy. Adjusting the screw with forward turns has no negative influence on the screw fixation stability; however, screw turnback may weaken the fixation stability. The aim of this study is to evaluate the biomechanical properties of screw turnback and demonstrate the reduction in the fixation stability after the screw is turned 360° from its full insertion position. Commercially available synthetic closed-cell polyurethane foams with three different densities simulating various degrees of bone density were utilized as substitutes for human bone. Two different screw shapes (cylindrical and conical) together with two different pilot hole profiles (cylindrical and conical) were tested. Following specimen preparation, screw pullout tests were conducted using a material test machine. The mean maximal pullout strength between full insertion and 360-degree turnback from full insertion in each setting was statistically analyzed. The mean maximal pullout strength after 360-degree turnback from full insertion was generally lower than that at full insertion. The reduced mean maximal pullout strength after turnback increased with decreasing bone density. Conical screws had significantly lower pullout strength after 360-degree turnback than cylindrical screws. The mean maximal pullout strength was reduced by up to approximately 27% after 360-degree turnback when using a conical screw in a low bone density specimen. Additionally, specimens treated with a conical pilot hole presented a less reduction in pullout strength after screw turnback as compared to those with a cylindrical pilot hole. The strength of our study was that we systematically investigated the effects of various bone densities and screw shapes on screw stability after turnback, which has rarely been reported in the literature. Our study suggests that pedicle screw turnback after full insertion should be reduced in spinal surgeries, particularly procedures that use conical screws in osteoporotic bone. Pedicle screw secured with a conical pilot hole might be beneficial for screw adjustment.

Smaller diameter femoral tunnel biocomposite interference screws provide adequate fixation strength in anterior cruciate ligament reconstruction.

The purpose of this study was to evaluate the effect of bioabsorbable interference screw diameter on the pullout strength and failure mode for femoral tunnel fixation in primary anterior cruciate ligament reconstruction (ACLR) at time zero fixation using bone-patellar tendon-bone (BTB) autograft in a cadaveric model. Twenty-four fresh-frozen cadaveric knees were obtained from 17 different donors. Specimens were allocated to three different treatment groups (n = 8 per group) based on interference screw diameter: 6mm, 7mm, or 8mm biocomposite interference screw. All specimens underwent dual energy X-ray absorptiometry (DEXA) scanning prior to allocation to ensure no difference in bone mineral density among groups (n.s.). All specimens underwent femoral-sided ACLR with BTB autograft. Specimens subsequently underwent mechanical testing under monotonic loading conditions to failure. The load to failure and failure mechanism were recorded. The mean pullout force (N) at time zero for each group was 309 ± 213 N, 518 ± 313 N, and 541 ± 267 N for 6mm, 7mm, and 8mm biocomposite interference screw diameter, respectively (n.s.). One specimen in the 6mm group, two specimens in the 7mm group, and one specimen in the 8mm group failed by screw pullout. The remainder in each group failed by graft failure (n.s.). Biocomposite interference screw diameter did not have a significant influence on fixation pullout strength or failure mode following femoral tunnel fixation using BTB autograft at time zero. A 6mm interference screw can improve preservation of native bone stock, increase potential for biologic healing, and decrease the risk of damage to the graft during insertion without significantly compromising fixation strength. This study supports the use of smaller 6mm interference screw diameter options for femoral tunnel fixation in ACLR.

LOW-PROFILE DUAL MINI-FRAGMENT PLATING OF DIAPHYSEAL CLAVICLE FRACTURES: A BIOMECHANICAL STUDY

Implant removal after clavicle plating is common. Low-profile dual mini-fragment plate constructs are considered safe for fixation of diaphyseal clavicle fractures. The aim of this study was to investigate: (1) the biomechanical competence of different dual plate designs from stiffness and cycles to failure, and (2) to compare them against 3.5mm single superoanterior plating.Twelve artificial clavicles were assigned to 2 groups and instrumented with titanium matrix mandible plates as follows: group 1 (G1) (2.5mm anterior+2.0mm superior) and group 2 (G2) (2.0mm anterior+2.0mm superior). An unstable clavicle shaft fracture (AO/OTA15.2C) was simulated. Specimens were cyclically tested to failure under craniocaudal cantilever bending, superimposed with torsion around the shaft axis and compared to previous published data of 6 locked superoanterior plates tested under the same conditions (G3).Displacement (mm) after 5000 cycles was highest in G3 (10.7±0.8) followed by G2 (8.5±1.0) and G1 (7.5±1.0), respectively. Both outcomes were significantly higher in G3 as compared to both G1 and G2 (p≤0.027). Cycles to failure were highest in G3 (19536±3586) followed by G1 (15834±3492) and G2 (11104±3177), being significantly higher in G3 compared to G2 (p=0.004). Failure was breakage of one or two plates at the level of the osteotomy in all specimens. One G1 specimen demonstrated failure of the anterior plate. Both plates in other G1 specimens. Majority of G2 had fractures in both plates. No screw pullout or additional clavicle fractures were observed among specimens.Low-profile 2.0/2.0 dual plates demonstrated similar initial stiffness compared to 3.5mm single plates, however, had significantly lower failure endurance. Low-profile 2.5/2.0 dual plates showed significant higher initial stiffness and similar resistance to failure compared to 3.5mm single locked plates and can be considered as a useful alternative for diaphyseal clavicle fracture fixation. These results complement the promising results of several clinical studies.