Road Transport System Research Articles

Flexible Charging to Energy Saving—Strategies Assessment with Big Data Analysis for PHEVs Private Cars

In road transport, most vehicles today still rely on internal combustion engines. However, these engines have lower efficiency and generate higher pollution levels compared to electric motors. Consequently, there is a growing interest in the transition from conventional vehicles to electric ones. However, the transition to an electrified road transport system is not without challenges. Among these, the impact that electric vehicle charging will have on the electricity grid is of particular concern. This paper analyzes different charging scenarios for plug-in hybrid electric vehicles (PHEVs) and proposes charging strategies to minimize their impact on the electricity grid. The analysis is based on a large dataset of trips in urban areas in Italy. The study shows that smart charging of PHEVs can be implemented to minimize the impact on the electricity grid. The implementation of optimized charging strategies can contribute to making PHEVs a valid, eco-sustainable alternative to conventional vehicles while also promoting the stability and efficiency of the electricity grid. The study aims to verify the effectiveness and efficiency of the flexible charging strategy by comparing the common charging operation (first in–first out) with other, less impactful charging schemes.

Carbon, Particulate Matter, and Heavy Metal Human Toxicity Footprint of IoT-based Micro Electric Vehicle (EV) Sharing for Urban Mobility

Purpose : The purpose of this study is to calculate and compare carbon footprint, particulate matter footprint, and heavy metal human toxicity footprint with operation data of IoT-based Micro Electric Vehicle (EV) Sharing for Urban Mobility, which was conducted in Chungbuk Innovation City (Jinchen Ducksaneup, Eumsung Mangdongmyun), Ochangeup (Cheongju), Osongeup(Cheongju) as a MOLIT Smart City Challenge Project, with petrol and diesel vehicles.Methods : In the assessment area, ten new Micro Electric Vehicles were used within the ‘TAYOU’ platform, which is an IoT-based micro electric vehicle sharing platform for smart mobility. These vehicles were operated for two months (1,021 times and 1,996 km). Data including vehicle numbers, charging start and end times, operating durations, return times, distances traveled (km), user information (name, driver's license, telephone number), and more were collected. Using this data, the carbon, particulate matter, and heavy metal human toxicity footprint were calculated and compared with those of petrol and diesel vehicles.Results and Discussion : The carbon footprints were 188.74 kg CO<sub>2</sub> eqv., 409.67 kg CO<sub>2</sub> eqv., 389.55 kg CO<sub>2</sub> eqv., in IoT-based Micro Electric Vehicle (EV), and petrol and diesel vehicle, respectively. The particulate matter footprint was 263.36 gPM<sub>2.5</sub> eqv., 21.37 gPM<sub>2.5</sub> eqv., and 439.47 gPM<sub>2.5</sub> eqv., respectively. The heavy metal human toxicity footprint was calculated at 0.029 g1.4 DCB eqv., 8.26 g1.4 DCB eqv., and 7.42 g1.4 DCB eqv., respectively; even though the pilot project was completed in just two months, the results showed a meaningful reduction in carbon, particulate matter, and heavy metals. If the service system can be extended, we can expect a more significant decrease in all environmental footprints. In the transition period from petrol and diesel vehicles to electric vehicles for carbon neutrality in road transportation systems, these results showed that electric vehicles can contribute significantly to reducing carbon, particulate matter, and heavy metals.Result : Carbon, particulate matter, and heavy metals reduction efforts are continuously needed in transportation. This study calculated and compared carbon, particulate matter, and heavy metal human toxicity footprints with electric, petrol, and diesel vehicles. As a result, in the future, this new small electric mobility (“TAYOU” Smart mobility vehicle) sharing service system can support and contribute to reducing carbon, particulate matter, and heavy metals emissions and footprints.

Wireless Power Transfer System in Electric Vehicle Application

Abstract: As an alternate form in the road transportation system, electric vehicle (EV) can help reduce the fossil-fuel consumption. However, the usage of EVs is constrained by the limited capacity of battery. Wireless Power Transfer (WPT) can increase the driving range of EVs by charging EVs in motion when they drive through a wireless charging lane embedded in a road. The amount of power that can be supplied by a charging lane at a time is limited. A problem here is when a large number of EVs pass a charging lane, how to efficiently distribute the power among different penetrations levels of EVs? However, there has been no previous research devoted to tackling this challenge. To handle this challenge, we propose a system to balance the State of Charge (called BSoC) among the EVs. It consists of three components: i) fog-based power distribution architecture, ii) power scheduling model, and iii) efficient vehicle-to-fog communication protocol. The fog computing center collects information from EVs and schedules the power distribution. We use fog closer to vehicles rather than cloud in order to reduce the communication latency. The power scheduling model schedules the power allocated to each EV. In order to avoid network congestion between EVs and the fog, we let vehicles choose their own communication channel to communicate with local controllers.

A Review of GIS Technology Applications in Transportation Planning and Management

With the rapid development of the economy, the scale of urban construction is expanding, the corresponding transportation infrastructure is also improving, and the traffic congestion problem is becoming more and more serious. The application of GIS technology to transportation management can effectively alleviate the problem of urban traffic congestion at this stage, thus improving the operation of road traffic. This paper describes the advantages of GIS technology in transportation planning and management from the aspects of accuracy, measurement convenience, visualization, scientific, dynamic, data management, and introduces its application initiatives in road design, traffic prediction, vehicle guidance, traffic system design, traffic analysis. The application of GIS technology in transportation planning is becoming more and more extensive and profound, the technology can provide ideas and technical support for modern transportation planning, but also can combine the construction of road transportation system with information technology, effectively improve the rationality and scientificity of the transportation planning program, and play a positive and significant role in reducing traffic congestion and improving the efficiency of traffic operation.

Mitigating flood impacts on road infrastructure and transportation by using multiple information sources

The transportation disruption caused by flood events is occurring more frequently and intensively due to climate change and rapid urbanization. Understanding the deterioration of road infrastructure and transportation caused by surface water floods is crucial to help city authorities alleviate flood consequences. This study aims to provide a framework to mitigate surface water flood damages in road transportation systems, using the Guangdong-Hong Kong-Macao Greater Bay Area (GBA) as a case study. An integrated framework linking news media analytics and vulnerability assessment is used to assess floods' effect and severity on road infrastructure and transportation. This study first examined historical news media activities toward flood-related transportation damage. Then, the study explored the potential impacts of surface water floods on road infrastructure and transportation via vulnerability assessment and news media analysis, respectively. The findings from this research offer valuable insights for city authorities to enhance flood mitigation strategies in road transportation systems.

CHANGE IN THE NUMBER OF TRAFFIC ACCIDENTS IN THE LVIV REGION DURING 2019–2023

Current trends in the development and modernisation of transportation systems focus on safety. However, it is worth conducting an in-depth analysis of data related to traffic safety factors to maximise the safety emphasis in future strategies. This approach concentrates the efforts of engineers and scientists primarily on combating the causes of road accidents rather than their consequences, as is often the case today. The object of research in this article is the street and road network of Lviv region, as it is necessary to take into account the regional aspects of traffic and their differences in the country’s regions, given the density of streets and roads, climatic and hydrometeorological conditions, as well as the typology of roads. One of the scientific problems that the study’s results can partially solve is to identify time patterns and dynamics of changes in the number of road accidents in the Lviv region and compare the results with the targets set out in strategic documents in the field of road safety in Ukraine. The article analyses the data on the number of road traffic accidents in the region from 2019 to 2023. At the same time, it carries out the statistical distribution of traffic accidents by the causes of their occurrence. We also account for the time aspect – a breakdown by time of day and days of the week, including the general trend over the past years. We established that the dynamics of the number and severity of road accidents for the period under consideration is negative; however, the patterns of their occurrence persist, which explains the positive statistical result obtained due to quantitative but not qualitative factors affecting traffic safety. The results obtained are of more value from an engineering and scientific point of view, particularly in comparison with traffic accident statistics disseminated on information resources or social media. The analysis conducted in this article allows us to identify problematic areas in the functioning of both the bodies that ensure the safety and organisation of road traffic and transport systems. Keywords: road safety, road traffic accident, accident rate, transport systems.

Network design and vehicle routing problems in road transport systems: Integrating models and algorithms

In this paper, an integrated approach is proposed that incorporates the road network design problem and the vehicle routing problem, which are very often studied separately. This approach can be adopted when the routes to follow in a transport system have to be designed (e.g., for public transit with fixed and variable routes, or for freight distribution) jointly with the network topology and capacity. The goal is to minimise congestion and the impacts on the network from passengers and freight vehicles. The design (control) variables consist of the optimal vehicle routes and optimised road network; they are both discrete (link topology for passenger and freight, routes for passengers and freight vehicles, etc.) and continuous (link capacity in terms of reserved lanes, signal settings, etc.). The problem is modelled in congested transportation networks (e.g., in an urban centre). A heuristic algorithm is adopted to find the best network configuration and the best vehicle routes. The proposed model and the adopted algorithm are applied in a test system to analyse the limits of the methodology, to verify the advantage obtained from the joint method and its applicability. In the test system, the joint procedure gives good results in terms of cost decreases. The reported methods can help public and private stakeholders in making decisions regarding transportation policy, especially in the urban environment.

Validation of a statistical-dynamic framework for predicting energy consumption: A study on vehicle energy conservation equation

Predictive models for vehicle energy consumption are crucial for sustainable development in urban road traffic systems. This paper comprehensively reviews classic predictive models and develops a novel statistical-dynamical energy consumption prediction framework called Vehicle Energy Conservation Equation (VECE). VECE is constructed based on the principles of vehicle energy flow and regression analysis, employing a continuous and concise mathematical formulation. Its coefficients possess clear physical interpretations, allowing for application in various vehicle categories. To validate VECE, this study collected energy consumption data from 28 vehicles, including 9 diesel vehicles, 16 gasoline vehicles, 1 ethanol gasoline vehicle, and 2 battery electric vehicles. A rigorous data processing procedure was designed. Data analysis revealed that the VECE coefficients are correlated with vehicle type, speed, and acceleration. VECE's predictive performance is minimally impacted by the number of vehicle categories, effectively modeling energy consumption for vehicles of the same fuel type or size category. Comparative analysis with E-EcoGest, VT-Micro, PERE, and CMEM demonstrates the moderate accuracy of VECE in predicting instantaneous vehicle energy consumption while excelling in predicting cumulative energy consumption. The minimum relative percentage error for the cumulative predicted values is 4.2%. Overall, VECE demonstrates outstanding performance in computational simplicity, coefficient interpretability, adaptability, and extensibility, making it a crucial tool for achieving energy-efficient road transport systems.

A multi-criteria decision-making framework for sustainable road transport systems: Integrating stakeholder-cost-environment-energy for a highway case study in United Arab Emirates

Existing lifecycle assessment models narrowly concentrate on limited parameters, disregarding system ecology and multi-stage stakeholder integration with sequestered analyses. Assimilation of new transport technologies with traditional design-bid-build decision-making paradigm should acknowledge sustainability triple-bottom-line social, cost, and environmental impacts, across all lifecycle stages for a system-wide optimisation. This study presents a multilevel framework to evaluate road transport system projects utilising 1) stakeholder engagement for flexibility in establishing key performance indicators, 2) passenger surveys to identify what encourages mode choice towards public transport, 3) microsimulation models, lifecycle cost and lifecycle analysis for quantitative assessment, 4) analytic hierarchy for qualitative assessment, and finally 5) multi-criteria modelling with stakeholder expert group preferences. Framework is applied to a 5-lane dual carriageway project in Abu Dhabi, analysing eight virgin and recycled material-based and public transport service alternatives. Study revealed the significance of saved user time, reduced fuel consumption during use phase and vehicle operational costs as the highest lifecycle impact generators. The total sustainability performance across the lifecycle for all alternatives was affected by traffic gridlock formation due to traffic growth in later years and lack of traffic load reduction strategies. Results showed that an autonomous vehicle-based bus rapid transit service coupled with recycled material to construct the road significantly reduced lifecycle cost (51.1%), energy (55.6%) and pollutant (54.5%-CO2, 49.7%-NOx, 24.1%-PM) burdens. It exhibited effectiveness of system choice using lifecycle assessment over the typically fragmented project planning and evaluation approach. Overall, framework exhibited robustness against unit cost and LCI uncertainties, fuel distribution assumptions, discount rate, and indicator weights variations based on priorities of different stakeholder groups.

MVR Delay: A Queueing Based Routing Model for C-V2X Mode 4 in VANET’s

During the last few years, the demand for vehicular ad-hoc networks (VANET) has gained great attraction in the intelligent transport system. The VANET architecture includes several critical features, such as distributed networking and the rapidly changing network topology. Due to the significant characteristics of road safety, it has gained a great deal of interest in industry and academia to enhance the safety of the road transport system. Efficient message exchange between vehicles and roadside units is a tedious task in VANET. Several techniques have been introduced to improve communication, but efficient packet delivery and delay reduction are challenging issues. Currently, the VANET technique has evolved as a “vehicle-to-everything (V2X)” communication standard. In addition, the 3GPP standards have introduced a new communication standard as an alternative to the IEEE 802.11p system. In this new release of 3GPP, two new communication modes are introduced, mode 3 and mode 4. Mode 3 requires a cellular infrastructure, whereas mode 4 can operate without cellular coverage. In this work, we focus on C-V2X mode 4 communications and present a novel routing scheme to deal with hidden terminal problems. The proposed approach generates a virtual queueing model in which efficient channel selection is performed so that packet collision and interference can be reduced by maximizing the distance in the virtual queue model. The experimental results demonstrate that the average performance of the proposed approach is obtained as 0.9383, 0.09 s, and 0.0617 in terms of packet delivery, end-to-end delay, and packet drop rate, respectively.

A Novel Data Envelopment Analysis Framework for Performance Evaluation of European Road Transport Systems

The role of transportation is becoming increasingly important in the world economy, and road transport in particular plays a very important role in all types of transportation. For this reason, it is extremely important to monitor its performance regularly. Very often, this is done using Data Envelopment Analysis (DEA) performance evaluation models, and consequently, there are numerous articles in the literature on DEA evaluation of road transport systems. In this study, we first summarise these articles and classify them according to different characteristics (environmental, safety, economic, energy). Finally, we use them as a basis for developing a novel DEA framework, which is used for the evaluation of the efficiency and ranking of road transport systems that also takes into account undesirable outputs, i.e. environmental and safety outputs. As a case study, we evaluate 28 European countries from technical, safety and environmental aspects. The CCR and SBM models are used to evaluate the efficiency of these countries for the last two years of published data. The results show that Denmark ranks first and Cyprus last for both years. It was also found that safety efficiency is generally rated lower than other criteria. Finally, the results and reasons for the efficiency and inefficiency of specific decision-making units, i.e. countries, are discussed.

Competency of Rural Roads Achieving Targets 3.6 and 11.2 of the Sustainable Development Goals in Bangladesh

Road Transportation is the major mode of transportation and is recognized as a significant contributor to the socio-economic development in many low-and-middle-income countries like in Bangladesh. In Bangladesh, this transport system is now responsible for carrying about 70% of passengers and 60% of freights and increasing the share of modalities day by day with the development of road transport systems. The responsibility for the improvement and maintenance of the total road network of the country is assigned mainly to the Roads and Highways Department (RHD) and the Local Government Engineering Department (LGED). But the road network belongs to LGED termed as “Rural Road” which is about 94% of the total road length and in the meantime, more than 40% is improved by mainly flexible pavements. However, the state of road traffic safety on many improved rural roads is poor due to narrow carriageways and shoulders along with roadside hazards. On the other hand, the overall road traffic safety in Bangladesh is poor compared to the developed and motorized countries. However, according to the police report, about 4000 people die and another 5000 people become injured by road traffic crashes in each year in Bangladesh but the World Health Organization estimates the fatalities are more than 25,000. However, Bangladesh has committed to achieving the targets 3.6 and 11.2 of the Sustainable Development Goals (SDG) assigned by the United Nations (UN) in 2015 concerning the improvement of road traffic safety by halving 50% of fatalities by 2030. Therefore, the achievement of the above two targets depends on the improvement of road traffic safety on highways as well as rural roads. This research highlights the barriers to improving the safety of rural roads to achieve the above two targets by 2030.

Intelligent Traffic Management System to Improve Mobility at Ayigya, a Commuter City in Ghana

The issue of vehicular traffic congestion is faced by most road users all over the world, including Ghana. The complications intensify day in and day out, especially in most urban areas, due to development and urbanization. The exponential increase in road users awakens concern for an effective road transportation system to convey people and goods from one place to another. In an attempt to mitigate the effect of the problem, a system based on a statistically programmed lighting sequence was introduced. This technique served its purpose for some time and was realized to be inefficient because it controlled traffic flow by assigning a fixed amount of green light time to each phase of traffic, which meant that green light time was sometimes given to lanes even when there was no conflicting traffic. The persistent nature of the problem requires the need for an intelligent traffic management system to effectively coordinate the flow of vehicles through the available road network. The proposed system works based on priority queuing, where green and red phases are dynamically assigned to lanes depending on the present traffic volume. The proposed system uses two methods of counting to determine the highest lane count. They are the Digital Vehicle Counting (DVC) and the Manuel Vehicle Counting (MVC) methods. An effective detection zone of sixty meters is declared away from the traffic intersection. The values produced by both counting methods are fed to the Traffic Phase Router (TPR) for comparison. The lane with the highest vehicle counts from both counters is given the chance to leave the intersection. The proposed system was designed using Simulation of Urban Mobility (SUMO) software. Results obtained after the simulation showed that the proposed system performed better than the existing system based on the Key Performance Indicators (KPIs) used.

Eye-Tracking Analysis of Proposed Signage Design to Prevent Accidents Caused by the Abrupt Appearance of Dividers on Indian Roads

The road transport system is expanding considerably in developing countries. Villages are connecting to major cities for business, education, health, and many other reasons because of road development and smooth transportation. There has been a rise in the number of road accidents observed, caused by abruptly appearing dividers on roads and a lack of required signage systems. This paper discusses scenarios of accidents due to such abruptly appearing dividers and offers a strategy to design appropriate signage to avoid road accidents in the future. It has been observed that permanent or movable arbitrary fixtures, such as a barricade or a small partition block wall, are installed to separate lanes, in addition to white-colored stripes that are typically employed for lane separation on roads. These fixtures, although they are intended as lane-dividing solutions on roads, cause serious, and at times, fatal accidents, due their sudden, uninitiated appearance on the road. To address this problem, alternative signage designs were designed and tested on Indian roads, based on human cognitive responses and visual attention analysis on signage using an eye-tracking method. In addition, the semantic quality and legibility of alternate signage designs were evaluated using a questionnaire to judge their overall efficacy. Hence, the best signage design solution is proposed for implementation near or before occurrences of road dividers to avoid accidents.

A National Innovation System Concept-Based Analysis of Autonomous Vehicles’ Potential in Reaching Zero-Emission Fleets

Change management for technology adoption in the transportation sector is often used to address long-term challenges characterized by complexity, uncertainty, and ambiguity. Especially when technology is still evolving, an analysis of these challenges can help explore different alternative future pathways. Therefore, the analysis of development trajectories, correlations between key system variables, and the rate of change within the entire road transportation system can guide action toward sustainability. By adopting the National Innovation System concept, we evaluated the possibilities of an autonomous vehicle option to reach a zero-emission fleet. A case-specific analysis was conducted to evaluate the industry capacities, performance of R&D organizations, main objectives of future market-oriented reforms in the power sector, policy implications, and other aspects to gain insightful perspectives. Environmental insights for transportation sector scenarios in 2021, 2030, and 2050 were explored and analyzed using the COPERT v5.5.1 software program. This study offers a new perspective for road transport decarbonization research and adds new insights to the obtained correlation between the NIS dynamics and achievement of sustainability goals. In 2050, it is expected to achieve 100% carbon neutrality in the PC segment and ~85% in the HDV segment. Finally, four broad conclusions emerged from this research as a consequence of the analysis.

Impact of road transport system on groundwater quality inferred from explainable artificial intelligence (XAI)

Road networks constitute a vital component of modern society, facilitating rapid transportation and driving economic activities by enabling the smooth movement of goods and people. However, the expansion of road systems carries significant environmental considerations, particularly regarding its impact on groundwater quality. Thus, it is crucial to understand the complex relationship between groundwater quality and the road traffic system. This paper aims to identify the impact of road transport systems on groundwater quality using a data-driven approach. Specifically, road network and groundwater chemistry data in Texas were obtained from an open data portal. This study was carried out in two phases: the explainable artificial intelligence (XAI) modeling phase and the multivariate analysis phase. In the XAI modeling phase, a prediction model was developed using eXtreme Gradient Boosting (XGB), with groundwater chemistry parameters as output features and road transport attributes as input features, i.e., elevation, annual average daily traffic, distance, lane-miles, speed limit and well depth. Furthermore, the relationships between groundwater chemistry parameters and road transport attributes were examined using feature importance and accumulated local effect (ALE). In the multivariate phase, Piper diagrams and principal component analysis (PCA) were utilized to identify the source of the selected groundwater chemistry parameters from the XAI models. The results of the prediction model showed that five groundwater chemistry parameters were significantly impacted by road transport systems with below a mean absolute percentage error of 0.20, including, pH, temperature, aluminum (Al), bicarbonate (HCO3−), and alkalinity. Additionally, XAI models were developed to understand the relationship between the road transport attributes on five selected parameters. The findings collectively indicated that the Texas groundwater qualities are greatly impacted by road transport systems within a distance of 50-meters and a well depth of 100-meters. This study provides a novel contribution to monitoring point sources of groundwater pollution using XAI techniques.

A Study on the Impact of Air Pollution on Health Status of Traffic Police Personnel in Kolkata, India

The global concern of escalating ambient air pollution and its profound impact on human health is paramount. While traffic police personnel are critical for maintaining the road safety and transportation system of any city in India, they are susceptible to occupational health risks due to ambient air pollution. This study investigated health challenges faced by traffic police personnel due to prolonged exposure to air pollutants prevalent in traffic-congested areas, including particulate matter (PM2.5 and PM10), nitrogen dioxide, and sulfur dioxide. The first phase of this study collected and analyzed secondary air quality data over five years (2019–2023) across six locations in Kolkata, India. The second phase employed a questionnaire-based survey to assess the health implications of air pollution exposure. The survey questionnaire captured information on physical health symptoms, stress-related indicators, lifestyle habits, and work hours of around 100 police personnel from Kolkata with indoor (control group) and outdoor (exposed group) work responsibilities. The results of this study established a strong positive correlation between air pollution and a range of health issues experienced by the exposed group. The outcome of this study is significant for urban planning, policy formulation, and public health interventions geared toward minimizing the adverse impacts of air pollution on traffic police personnel.

Sensors, standards and analysis techniques for road transport vibration: A systematic review

This comprehensive review paper analyzes 20 published articles focused on the instrumentation and analysis of road transport vibrations. The study encompasses the distribution of articles based on databases, journals, and publication years, revealing trends in research sources. The examination of sensors and standards emphasizes the critical role of vibration sensor selection and the application of standards, with a focus on accelerometer designs and the prevalence of ASTM D4169-16. The paper delves into various analytical methods, highlighting the frequent use of power spectral density (PSD) and the application of these methods in understanding vibration frequencies and their effects on different transportation conditions. The review identifies key areas for future research, emphasizing the need for refined instrumentation methodologies, standardized standards, and exploration of advanced analytical techniques, considering the dynamic nature of real-world vibrations and emerging technologies in the road transport landscape. Additionally, the review suggests future investigations into optimizing packaging designs and developing innovative materials with vibration-damping properties to enhance the safety and efficiency of road transportation systems.

Strategies for Reducing Automobile Fuel Consumption

In recent times, the significance of advancing road transportation technologies has notably increased. This is mainly driven by the escalating need for road transportation systems that are not only safe but also environmentally sustainable. Moreover, enhancing fuel efficiency in road vehicles (i.e., automobiles) holds the potential to contribute significantly to the reduction of a country’s economic vulnerability (i.e., improved energy security), by reducing the reliance on energy imports. While research reports and scientific journals provide valuable information on automobile fuel consumption, it is essential to continually update our understanding of the factors that influence it. This document aims to review and describe the various factors, both direct and indirect, that play a role in an automotive’s overall energy efficiency and fuel consumption.

Visually-shaped comfort of perceiving the architectural environment in conditions of artificial lighting (using the example of Chelyabinsk)

The study, conducted at the facilities of Chelyabinsk, aims to identify the essence of the comfort visually-shaped perception of the artificial architectural and light environment. This is achieved by an integrated approach, which involves the analysis of scientific and information resources, including regulatory and legal documents, field observations and surveys, graphical analysis of architectural and light environmental fragments under artificial lighting. An analysis of the regulatory framework on the lighting of architectural objects and urban space demonstrated the technical regulations of this sphere clearly articulating the visual comfort concept and its parameters only in relation to the interior space and the road transport system. The study clarified the concept and conditions of creating a shaping aspect in the visual perception of the urban artificial architectural and light environment. Mostly in terms of comfort for this process, the Chelyabinsk areas of the architectural and light environment in artificial lighting conditions were studied. Based on the results of the study, it can be concluded that the process of forming an artificial architectural and light environment of the city should be based on a visuallyshaped comfort, proceeding in a certain sequence and associated with the emergence of new factors of innovative urban environmental development. The relationship between the visually-shaped comfort of perceiving the artificial architectural and light environment, as well as the basics of the functional safety of subjects at the nodal points of the city were established. According to the experience of a typical domestic metropolis of Chelyabinsk, theoretical and research materials, presented in the article, can serve as the basis for the further interdisciplinary development of a visually comfortable and safe artificial architectural and light environment of cities.