Ring-opening Copolymerization Research Articles

Degradable biporous polymeric networks based on 2-methylene-1,3-dioxepane: Towards hierarchically structured materials meant for biomedical applications

For the first time, the preparation of doubly porous “poly(ε-caprolactone)-like” networks through free-radical ring-opening copolymerization of 2-methylene-1,3-dioxepane with divinyl adipate was achieved via a double porogen templating approach. This versatile strategy allowed for the formation of macropores of around 150 μm generated by removal of sieved and sintered NaCl particles in water, while smaller pores in the 1–10 μm range were created by phase separation during the copolymerization process through a syneresis mechanism in the presence of a porogenic solvent. The chemical nature of the as-obtained scaffolds was evidenced by Raman spectroscopy. The two distinct porosity levels could be examined by scanning electron microscopy and mercury intrusion porosimetry. The nature of the porogenic solvent as well as its volume proportion and the amount of crosslinking agent in the polymerization feed allowed for finely tuning the porous features of the micropores. The crucial role of the double porosity of such biporous scaffolds on their water uptake and mechanical properties under compression was assessed by comparing them with their monoporous analogues, while their degradability was investigated in different alkaline aqueous media. The double porosity enabled a synergistic effect regarding the water uptake of the resulting scaffolds when compared to their monoporous counterparts. Doubly porous polymeric materials with appropriate mechanical properties were obtained, possessing high compressibility and shape memory behavior upon consecutive compression cycles. Finally, these materials display degradation rates that could be controlled depending on medium pH.

Synthesis, melt molding and hydrolytic degradation of poly(L-lactide-co-l-methylglycolide) and its composites with carbonated apatite

Poly(lactic-co-glycolic acid)s (PLGAs) hold considerable significance for their biomedical applications. Biodegradation and mechanical properties of PLGAs and PLGA-based composites are strongly influenced by lactate/glycolate (L/G) ratio in copolymers, molecular weight characteristics and microstructure of PLGAs. The common approach to PLGAs is based on ring-opening copolymerization of lactides and glycolide, the products of which contain long (L)n and (G)n segments. An efficient but expensive approach to PLGAs with given l-G sequences is a segmer assembly polymerization that is hardly applicable for the synthesis of high-MW PLGAs. In the present work, for the first time we synthesized lactate-enriched PLGAs using ring-opening copolymerization of l-lactide (l-LA) with l-methylglycolide (l-MeGL) in 85:15 and 70:30 molar ratios, resulting in l-PLMG 85/15 and l-PLMG 70/30 copolymers. l-PLGA 85/15 with the same L/G ratio as in PLMG 70/30 was synthesized by ring-opening copolymerization of l-LA with glycolide as a sample for a comparison. According to 1H and 13C NMR data and [α]D measurements, l-MeGL-based PLGAs had a unique microstructure, e.g. macromolecules of l-PLMG 85/15 consisted of Ln sequences with single G insertions. Composites of PLLA and three samples of PLGAs with plate-like carbonated apatite (pCAp) containing 25 and 50 wt.% of the filler were prepared. Rectangular specimens from (co)polymers and (co)polymer composites were obtained by injection molding and studied. Due to the absence of highly reactive (G)n fragments, l-PLMG 85/15 and PLMG 70/30-based materials demonstrated higher thermal and hydrolytic stability, mechanical testing showed that l-MeGL-based copolymers provide better maintaining of the bending strength in comparison with l-PLGA 85/15 matrix.

Ring-Opening Copolymerizations of a CO2-Derived δ-Valerolactone with ε-Caprolactone and l-Lactide

Ring-Opening Copolymerizations of a CO₂-Derived δ-Valerolactone with ε-Caprolactone and <scp>l</scp>-Lactide

Preparation of a Novel Branched Polyamide 6 (PA6) via Co-Polymerization of ε-Caprolactam and α-Amino-ε-Caprolactam

In this study, a novel branched polyamide 6 has been synthesized via the hydrolytic ring-opening co-polymerization of ε-caprolactam (CPL) and α-Amino-ε-caprolactam (ACL). The NMR characterization proves the existence of a branched chain structure. The rheological test determines that there is a remarkable increase in the melt index (MFR), zero shear rate viscosity, and storage modulus in the low-frequency region. The shear-thinning phenomenon becomes more obvious. The thermal properties tested by differential scanning calorimetry (DSC) show that the melting point and crystallinity of co-polymers decrease with the incorporation of ACL. However, the crystal structure of the samples only exhibits a slight change. When the ACL content in the feed is 1 wt%, the tensile strength and fracture elongation rate of the co-polymers show a significant enhancement.

Schiff‐Base Aluminum Complexes as Bifunctional Catalysts for the Selective Ring‐Opening Co‐Polymerization of Cyclohexene Oxide and Succinic Anhydride

AbstractThe ring‐opening copolymerization (ROCOP) of epoxides and cyclic anhydrides is emerging as a powerful method for the synthesis of polyesters with innovative structures and properties. In this work, a series of dialkyl‐aluminum complexes stabilized by Schiff‐base ligands with different functional side arms (pyridine, amine, or phosphine) and different substituents on the phenoxy moieties have been synthetized and tested as catalysts in the ROCOP of cyclohexene oxide (CHO) and succinic anhydride (SA). The selectivity of the catalysts in the ROCOP was significatively depending on the nature of the pendant arm and/ or of the substituents of the ligand framework. The complexes designed to have a dynamic coordination sphere in which the side arms simulate the role of a neutral cocatalyst favored the desired selectivity, giving poly(CHO‐alt‐SA) with narrow dispersity and negligible ether linkage. NMR investigations and DFT calculations rationalized the observed behavior.

Insights into the Distinct Behaviors between Bifunctional and Binary Organoborane Catalysts through Terpolymerization of Epoxide, CO2, and Anhydride.

Alkyl borane compounds-mediated polymerizations have expanded to Lewis pair polymerization, free radical polymerization, ionic ring-opening polymerization, and polyhomologation. The bifunctional organoborane catalysts that contain the Lewis acid and ammonium or phosphonium salt in one molecule have demonstrated superior catalytic performance for ring-opening polymerization of epoxides and ring-opening copolymerization of epoxides and CO2 than their two-component analogues, i.e., the blend of organoborane and ammonium or phosphonium salt. To explore the origin of the differences of the one-component and two-component organoborane catalysts, here we conducted a systematic investigation on the catalytic performances of these two kinds of organoborane catalysts via terpolymerization of epoxide, carbon dioxide and anhydride. The resultant terpolymers produced independently by bifunctional and binary organoborane catalyst exhibited distinct microstructures, where a series of gradient polyester-polycarbonate terpolymers with varying polyester content were afforded using the bifunctional catalyst, while tapering diblock terpolymers were obtained using the binary system. The bifunctional catalyst enhances the competitiveness of CO2 insertion than anhydride, which leads to the premature incorporation of CO2 into the polymer chains and ultimately results in the formation of gradient terpolymers. DFT calculations revealed the role of electrostatic interaction and charge distribution caused by intramolecular synergistic effect for bifunctional organoborane catalyst.

Choline Halide-Based Deep Eutectic Solvents as Biocompatible Catalysts for the Alternating Copolymerization of Epoxides and Cyclic Anhydrides.

Aliphatic polyesters have received considerable attention in recent years due to their biodegradability and biocompatible, mechanical, and thermal properties that can make them a suitable alternative to today's commercialized polymers. The ring-opening copolymerization (ROCOP) of epoxides and cyclic anhydrides is a route to synthesize a diverse array of polyesters that could be useful in many applications. However, the catalysts used rarely consider biocompatible catalysts in the case that any are left in the polymer. To the best of our knowledge, we report the first example of using deep eutectic solvents (DESs) as biocompatible catalysts for this target ROCOP with polymerization activity for at least six diverse monomer pairs. Choline halide salts are active for this polymerization, with dried salts showing polymerization slower than that of those conducted in air. Hydrogen bonding with water is hypothesized to enhance the rate-determining step of epoxide ring opening. While the presence of water improves the rate of polymerization, it also acts as a chain transfer agent, leading to smaller molar mass polymers than intended. Combining the choline halide salts with urea or ethylene glycol hydrogen bond donors in air led to DES catalysts that reacted similarly to the salts exposed to air. However, when generating these DESs in air-free conditions, they showed similar rates of polymerization without a drop in polymer molar mass. The hydrogen bonding provided by urea and ethylene glycol seems to promote the rate increase without serving as a chain transfer agent. Results reported herein display the promising potential of biocompatible catalyst systems for this ROCOP process as well as introducing the use of hydrogen bonding to enhance polymerization rates.

Toward Synthetic Intrinsically Disordered Polypeptides (IDPs): Controlled Incorporation of Glycine in the Ring-Opening Polymerization of N-Carboxyanhydrides.

Intrinsically disordered proteins (IDPs) do not have a well-defined folded structure but instead behave as extended polymer chains in solution. Many IDPs are rich in glycine residues, which create steric barriers to secondary structuring and protein folding. Inspired by this feature, we have studied how the introduction of glycine residues influences the secondary structure of a model polypeptide, poly(l-glutamic acid), a helical polymer. For this purpose, we carried out ring-opening copolymerization with γ-benzyl-l-glutamate and glycine N-carboxyanhydride (NCA) monomers. We aimed to control the glycine distribution within PBLG by adjusting the reactivity ratios of the two NCAs using different reaction conditions (temperature, solvent). The relationship between those conditions, the monomer distributions, and the secondary structure enabled the design of intrinsically disordered polypeptides when a highly gradient microstructure was achieved in DMSO.

Key progresses of MOE key laboratory of macromolecular synthesis and functionalization in 2023

In 2023, The MOE Key Laboratory of Macromolecular Synthesis and Functionalization in Zhejiang University had achieved several important results in the five research directions. First, for controllable catalytic polymerization, a new silicon-centered organoboron binary catalyst was developed for copolymerization of epoxides, and a series of cooperative organocatalysts were proposed for ring-opening copolymerization of chalcogen-rich monomers. Second, with respect to microstructure and rheology, axially encoded metafiber demonstrated its capacity for integrating multiple electronics, while artificial nacre materials showed improved strength and toughness due to interlayer entanglement. Third, concerning separating functional polymers, interfacial polymerization was monitored via aggregation-induced emission, and vacuum filtration was applied to assist interfacial polymerization. Fourth, in terms of biomedical functional polymers, we designed antibacterial materials such as a novel quaternary ammonium salt that enables polyethylene terephthalate recycling and its antibacterial function, nanozyme-armed phage proved its efficiency in combating bacterial infection, and also transition metal nanoparticles showed capacities in antibacterial treatments. We also made achievements in biomedical materials, including polymeric microneedles for minimally invasive implantation and functionalization of cardiac patches, as well as ROS-responsive/scavenging prodrug/miRNA balloon coating to promote drug delivery efficiency. Besides, methods and mechanisms of RNA labeling has been developed. Fifth, about photo-electro-magnetic functional polymers, through-space conjugation was successfully manipulated by altering subunit packing modes, room-temperature phosphorescent hydrogels were synthesized via polymerization-induced crystallization of dopant molecules, and single crystals of both fullerene and non-fullerene acceptors were grown in crystallized organogel, with their photodetection performance further explored. The related works are reviewed in this paper.

A Sacrificial Linker in Biodegradable Polyesters for Accelerated Photoinduced Degradation, Monitored by Continuous Atline SEC Analysis.

Polymeric materials that undergo photoinduced degradation have wide application in fields such as controlled release. Most methods for photoinduced degradation rely on the UV or near-UV region of the electromagnetic spectrum; however, use of the deeply penetrating and benign wavelengths of visible light offers a multitude of advantages. Here we report a lactone monomer for ring-opening copolymerizations to introduce a sacrificial linker into a polymer backbone which can be cleaved by reactive oxygen species which are produced by a photocatalyst under visible light irradiation. We find that copolymers of this material readily degrade under visible light. We followed polymer degradation using a continuous flow size exclusion chromatography system, the components of which are described herein.

Organobase-Catalyzed Ring-Opening Copolymerization of Cyclic Anhydrides and Oxetanes: Establishment and Application in Block Copolymer Synthesis

Organobase-Catalyzed Ring-Opening Copolymerization of Cyclic Anhydrides and Oxetanes: Establishment and Application in Block Copolymer Synthesis

Quantifying CO2 Insertion Equilibria for Low-Pressure Propene Oxide and Carbon Dioxide Ring Opening Copolymerization Catalysts.

While outstanding catalysts are known for the ring-opening copolymerization (ROCOP) of CO2 and propene oxide (PO), few are reported at low CO2 pressure. Here, a new series of Co(III)M(I) heterodinuclear catalysts are compared. The Co(III)K(I) complex shows the best activity (TOF = 1728 h-1) and selectivity (>90% polymer, >99% CO2) and is highly effective at low pressures (<10 bar). CO2 insertion is a prerate determining chemical equilibrium step. At low pressures, the concentration of the active catalyst depends on CO2 pressure; above 12 bar, its concentration is saturated, and rates are independent of pressure, allowing the equilibrium constant to be quantified for the first time (Keq = 1.27 M-1). A unified rate law, applicable under all operating conditions, is presented. As proof of potential, published data for leading literature catalysts are reinterpreted and the CO2 equilibrium constants estimated, showing that this unified rate law applies to other systems.

Visible light-induced photo-radical ring-opening copolymerization of thionolactone and acrylates

Radical ring-opening (co)polymerization (RROP) provides an accessible method for synthesizing main chain degradable vinyl polymers. Although the applications of reversible deactivation radical polymerization (RDRP) into RROP have been reported, the use of photo-mediated RDRP methods has received less attention than the thermal process. Here, photo-RROP of the thionolactone dibenzo [c,e]-oxepine-5(7H)-thione (DOT) and methyl acrylate (MA) was studied using photo-iniferter (PI) reversible addition-fragmentation (chain) transfer (RAFT) polymerization at ambient temperature without external radical initiators or photocatalysts. Despite the occurrence of some side reactions including desulfurization-oxygenation and O–S isomerization of DOT promoted by photoexcited thiocarbonyl groups, polymers with thioester linkages in the backbone were prepared, which degraded in the presence of amines and bleach.

Ring Opening Copolymerization of Epoxides with CO2 and Organic Anhydrides Promoted by Dinuclear [OSSO]‐type Metal Complexes

AbstractThe ternary copolymerization of a series of cyclic anhydrides with epoxides and carbon dioxide using dinuclear [OSSO]‐type chromium (III),1, and ‐iron(III), 2, complexes (0.1 mol %) in combination with (bis(triphenylphosphine)iminium chloride) (PPNCl, 0.5–1.0 mol with respect to catalyst) as co‐catalyst is reported in this study. The results have yielded copolymers with polyester and polycarbonate segments with high molecular weights and narrow dispersity. The catalytic systems 1–2/PPNCl were tested in the copolymerization of different epoxides, such as propylene oxide (PO), cyclohexene oxide (CHO), and vinylcyclohexene oxide (VCHO), with a variety of cyclic anhydrides, such as phthalic (PA), diglycolic (DGA) and succinic (SA), with CO2 pressure of 20 bar, temperature range of 45–80 °C in 24 h. Anhydride reaction, affording the polyester segments, exceeded the conversion of 99 % in all the explored cases. On the other hand, in the case of epoxide copolymerization with CO2, for the propylene oxide (PO) reaction, the selectivity towards polypropylene carbonate (PPC) without polyether linkage consistently was &gt;99 %. For the terpolymerization of PO, CO2 and diglycolic anhydride (DGA), a notable epoxide conversion of 86 %, selectively to polycarbonate, with TOF value as high as 36 h−1, was achieved.

PH/GSH-responsive diselenide-containing micelle via backbone ketoxime cross-links for efficient drug delivery and controlled release

Stimulus-responsive polymers are promising drug delivery systems for cancer therapy. However, low drug loading and drug leakage of polymeric carriers remain challenges. Here, a crosslinked diselenide-containing micelle was developed with pH/GSH dual responsiveness. Polyesters with multiple diselenide bonds and pendant ketone groups were synthesized by the ring-opening copolymerization of three cyclic monomers (diselenide-containing macrocyclic carbonate, 2-oxepane-1,5-dione, and 1,3-dioxan-2-one). The crosslinked polyester was obtained by the oxime click reaction of pendant ketone groups with hydroxylamine and then self-assembled into crosslinked micelle. This crosslinked micelle remained stable for 14 days, and responded to disassembly under the condition of pH = 5.0 and 10 mM glutathione (GSH). When the crosslinked micelle was loaded with the chemotherapeutic drug DOX, which possessed an active ketone group, the encapsulation efficiency of the crosslinked micelle increased to 91.36 %. The cumulative DOX release reached approximately 45 % under pH = 5.0 and 10 mM GSH. Importantly, the crosslinked diselenide-containing micelle could be taken up in MCF-7 breast cancer cells, responding to the tumor microenvironment and releasing encapsulated DOX. This crosslinked diselenide-containing micelle with pH/GSH dual responsiveness was proven to be a stable and efficient carrier with a promising application.

High Molar Mass Polycarbonates as Closed-Loop Recyclable Thermoplastics.

Using carbon dioxide (CO2) to make recyclable thermoplastics could reduce greenhouse gas emissions associated with polymer manufacturing. CO2/cyclic epoxide ring-opening copolymerization (ROCOP) allows for >30 wt % of the polycarbonate to derive from CO2; so far, the field has largely focused on oligocarbonates. In contrast, efficient catalysts for high molar mass polycarbonates are underinvestigated, and the resulting thermoplastic structure-property relationships, processing, and recycling need to be elucidated. This work describes a new organometallic Mg(II)Co(II) catalyst that combines high productivity, low loading tolerance, and the highest polymerization control to yield polycarbonates with number average molecular weight (Mn) values from 4 to 130 kg mol-1, with narrow, monomodal distributions. It is used in the ROCOP of CO2 with bicyclic epoxides to produce a series of samples, each with Mn > 100 kg mol-1, of poly(cyclohexene carbonate) (PCHC), poly(vinyl-cyclohexene carbonate) (PvCHC), poly(ethyl-cyclohexene carbonate) (PeCHC, by hydrogenation of PvCHC), and poly(cyclopentene carbonate) (PCPC). All these materials are amorphous thermoplastics, with high glass transition temperatures (85 < Tg < 126 °C, by differential scanning calorimetry) and high thermal stability (Td > 260 °C). The cyclic ring substituents mediate the materials' chain entanglements, viscosity, and glass transition temperatures. Specifically, PCPC was found to have 10× lower entanglement molecular weight (Me)n and 100× lower zero-shear viscosity compared to those of PCHC, showing potential as a future thermoplastic. All these high molecular weight polymers are fully recyclable, either by reprocessing or by using the Mg(II)Co(II) catalyst for highly selective depolymerizations to epoxides and CO2. PCPC shows the fastest depolymerization rates, achieving an activity of 2500 h-1 and >99% selectivity for cyclopentene oxide and CO2.

Phosphorus-containing stereocontrolled polyhydroxyalkanoates by yttrium-mediated ring-opening copolymerization of β-lactones

Poly(3-hydroxybutyrate) (PHB) polymers functionalized with pendent diphenyl-phosphinate moieties were prepared by the simultaneous ring-opening copolymerization (ROCOP) of racemic or enantiopure β-butyrolactone (rac- or (S)-BPLMe, respectively) with racemic-(4-oxooxetan-2-yl)methyl diphenylphosphinate (rac-BPLOP). The reactions were mediated by yttrium catalysts which tunable ancillary structure enabled preparing copolymers containing syndio-enriched (Pr up to 0.84; Pr is the probability of racemic linkage), atactic (Pr ∼ 0.50) and highly isotactic (Pr < 0.06) poly(BPLMe) (P(BPLMe), aka PHB for polyhydroxybutyrate) segments, starting from rac-BPLMe or (S)-BPLMe, respectively, as assessed by detailed NMR analyses of the copolymer samples. The amount of BPLOP incorporated within the P[(BPLMe)x-co-(BPLOP)y] samples were in line with the initial comonomer loadings (1.8–8.1 mol% vs. 2–10 mol%). The ROCOP was rather well-controlled affording linear α-isopropoxy, ω-crotonyl telechelic and cyclic random copolymers with Mn,NMR up to 15,000 g.mol−1 and ÐM = 1.34–1.95. Detailed MALDI and high-resolution ESI mass spectrometric analyses evidenced the formation of three major series of macromolecules, namely the cyclic one and two linear ones end-capped with an α-isoproxy and either an ω-hydroxy or a ω-crotonate groups; for each of these series, the populations containing y = 0, 1 or 2 BPLOP repeating units were unambiguously distinguished. The thermal characteristics of the P[(BPLMe)x-co-(BPLOP)y] copolymers were investigated by DSC and TGA, revealing in comparison to those of the parent PHB homopolymers, tunable features as a function of their molar mass, tacticity and BPLOP content.

Stereocomplexed Functional and Statistical Poly(lactide-carbonate)s via a Simple Organocatalytic System.

The stereocomplexation of polylactide (PLA) has been widely relied upon to develop degradable, sustainable materials with increased strength and improved material properties in comparison to stereopure PLA. However, forming functionalized copolymers of PLA while retaining high crystallinity remains elusive. Herein, the controlled ring-opening copolymerization (ROCOP) of lactide (LA) and functionalized cyclic carbonate monomers is undertaken. The produced polymers are shown to remain crystalline up to 25 mol % carbonate content and are efficiently stereocomplexed with homopolymer PLA and copolymers of opposite chirality. Polymers with alkene and alkyne pendent handles are shown to undergo efficient derivatization with thiol-ene click chemistry, which would allow both the covalent conjugation of therapeutic moieties and tuning of material properties.

Alternating ring‐opening copolymerization of cyclic anhydrides and epoxides by zeolitic imidazolate framework‐67: A promising approach

The ring opening copolymerization (ROCOP) of epoxides and cyclic anhydrides is one of the most important ways to synthesize polyesters both in industrial and academic fields. Herein, the zeolitic imidazolate framework‐67 (ZIF‐67) was used as a heterogeneous catalyst for the ROCOP of epoxides and cyclic anhydrides without co‐catalyst and initiator. Notably, the obtained polyesters with alternate structures were proved by the 1H NMR spectrum and FTIR spectrum, which indicate the ROCOP is alternatively copolymerized. Kinetic study of the ROCOP of cyclohexene oxide (CHO) and phthalic anhydride (PA) shows that the polymerization reaction is first‐order kinetics. The apparent activation energy (Ea) of the ROCOP of CHO and PA catalyzed by ZIF‐67 was found to be about 104.4 KJ/mol. A possible mechanism of ROCOP of CHO and PA is that the metal Co coordinates with the oxygen atom on the monomer to weaken the C‐O bond thereby opening the ring structure and initiating the copolymerization reaction. In this study, a new system for the copolymerization of epoxide and anhydride catalyzed by heterogeneous catalysts was discovered, which has important guiding significance.

Functional and Degradable Polyester-co-polyethers from CO2, Butadiene, and Epoxides.

Carbon dioxide (CO2), as a renewable and nontoxic C1 feedstock, has been recognized as an ideal comonomer to prepare sustainable materials. In this regard, substantial focus has been dedicated to the ring-opening copolymerization of CO2 and epoxides, which results in the creation of aliphatic polycarbonates in most cases. Here, we report an unprecedented strategy to synthesize functional and degradable polyester-co-polyethers from CO2, butadiene, and epoxides via a CO2/butadiene-derived δ-valerolactone intermediate (EVP). Utilizing a chromium salen complex as the catalyst, the copolymerization of EVP and epoxides was successfully achieved to produce CO2/butadiene/epoxide terpolymers. The obtained polyester-co-polyethers with varied 39-93 mol % EVP content (equal to 18-28 wt % CO2 incorporation) show high thermal stability, tunable glass-transition temperatures, on-demand functionality, and good chemical degradability. This method extends the potential to access functional CO2-based polymers.