Response Of Mesenchymal Stem Cells Research Articles

Graphene monolayer as an appropriate substrate for mesenchymal stem cells support in regenerative medicine

Synergistic effect of mesenchymal stem cells and graphene monolayer is an undiscovered topic and crucial in the context of creating a graphene skin dressing. Moreover, capturing early changes in the cytoskeleton may prove to be a valuable indicator of cell condition after direct contact with the biomaterial. In this context, here, we investigated the response of human bone marrow mesenchymal stem cells (hBM-MSCs) to graphene monolayer as a scaffold, based on cytoskeleton architecture. Three main components of the cytoskeleton — microfilaments, intermediate filaments and microtubules were characterized as well as analyzed its entire cell morphology (focal adhesions). Based on microscopic analysis and cell area measurements, it can be stated that graphene did not cause a damage or disturbance of any cytoskeleton members and linker proteins (plectin, vinculin) and gap junction protein (connexin 43). hBM-MSCs growing on the graphene monolayer were more spread than cells growing on the glass but without any other significant difference. This suggested that graphene substrate as a monolayer could be a structural reinforcement for MSCs cultivation without affecting their cytoskeleton, which determines cell integrity, connections and migration, all important cell properties in the process of skin wound healing.

Loss of regulation of protein synthesis and turnover underpins an attenuated stress response in senescent human mesenchymal stem cells

Cells respond to stress by synthesizing chaperone proteins that seek to correct protein misfolding and maintain function. However, abrogation of protein homeostasis is a hallmark of aging, leading to loss of function and the formation of proteotoxic aggregates characteristic of pathology. Consequently, discovering the underlying molecular causes of this deterioration in proteostasis is key to designing effective interventions to disease or to maintaining cell health in regenerative medicine strategies. Here, we examined primary human mesenchymal stem cells, cultured to a point of replicative senescence and subjected to heat shock, as an invitro model of the aging stress response. Multi -omics analysis showed how homeostasis components were reduced in senescent cells, caused by dysregulation of a functional network of chaperones, thereby limiting proteostatic competence. Time-resolved analysis of the primary response factors, including those regulating heat shock protein 70 kDa (HSPA1A), revealed that regulatory control is essentially translational. Senescent cells have a reduced capacity for chaperone protein translation and misfolded protein (MFP) turnover, driven by downregulation of ribosomal proteins and loss of the E3 ubiquitin ligase CHIP (C-terminus of HSP70 interacting protein) which marks MFPs for degradation. This limits the cell's stress response and subsequent recovery. A kinetic model recapitulated these reduced capacities and predicted an accumulation of MFP, a hypothesis supported by evidence of systematic changes to the proteomic fold state. These results thus establish a specific loss of regulatory capacity at the protein, rather than transcript, level and uncover underlying systematic links between aging and loss of protein homeostasis.

Salmonella enhances osteogenic differentiation in adipose-derived mesenchymal stem cells.

The potential of mesenchymal stem cells (MSCs) for tissue repair and regeneration has garnered great attention. While MSCs are likely to interact with microbes at sites of tissue damage and inflammation, like in the gastrointestinal system, the consequences of pathogenic association on MSC activities have yet to be elucidated. This study investigated the effects of pathogenic interaction on MSC trilineage differentiation paths and mechanisms using model intracellular pathogen Salmonella enterica ssp enterica serotype Typhimurium. The examination of key markers of differentiation, apoptosis, and immunomodulation demonstrated that Salmonella altered osteogenic and chondrogenic differentiation pathways in human and goat adipose-derived MSCs. Anti-apoptotic and pro-proliferative responses were also significantly upregulated (p < 0.05) in MSCs during Salmonella challenge. These results together indicate that Salmonella, and potentially other pathogenic bacteria, can induce pathways that influence both apoptotic response and functional differentiation trajectories in MSCs, highlighting that microbes have a potentially significant role as influencers of MSC physiology and immune activity.

Metal Nanoparticles with Antimicrobial Properties: The Toxicity Response in Mouse Mesenchymal Stem Cells.

Some metal nanoparticles (NP) are characterized by antimicrobial properties with the potential to be used as alternative antibiotics. However, NP may negatively impact human organism, including mesenchymal stem cells (MSC), a cell population contributing to tissue growth and regeneration. To address these issues, we investigated the toxic effects of selected NP (Ag, ZnO, and CuO) in mouse MSC. MSC were treated with various doses of NP for 4 h, 24 h, and 48 h and multiple endpoints were analyzed. Reactive oxygen species were generated after 48 h CuO NP exposure. Lipid peroxidation was induced after 4 h and 24 h treatment, regardless of NP and/or tested dose. DNA fragmentation and oxidation induced by Ag NP showed dose responses for all the periods. For other NP, the effects were observed for shorter exposure times. The impact on the frequency of micronuclei was weak. All the tested NP increased the sensitivity of MSC to apoptosis. The cell cycle was most affected after 24 h, particularly for Ag NP treatment. In summary, the tested NP induced numerous adverse changes in MSC. These results should be taken into consideration when planning the use of NP in medical applications where MSC are involved.

Mesenchymal Stem Cells Sense the Toughness of Nanomaterials and Interfaces.

Stem cells are known to sense and respond to the mechanical properties of biomaterials. In turn, cells exert forces on their environment that can lead to striking changes in shape, size and contraction of associated tissues, and may result in mechanical disruption and functional failure. However, no study has so far correlated stem cell phenotype and biomaterials toughness. Indeed, disentangling toughness-mediated cell response from other mechanosensing processes has remained elusive as it is particularly challenging to uncouple Youngs' or shear moduli from toughness, within a range relevant to cell-generated forces. In this report, it is shown how the design of the macromolecular architecture of polymer nanosheets regulates interfacial toughness, independently of interfacial shear storage modulus, and how this controls the expansion of mesenchymal stem cells at liquid interfaces. The viscoelasticity and toughness of poly(l-lysine) nanosheets assembled at liquid-liquid interfaces is characterised via interfacial shear rheology. The local (microscale) mechanics of nanosheets are characterised via magnetic tweezer-assisted interfacial microrheology and the thickness of these assemblies is determined from in situ ellipsometry. Finally, the response of mesenchymal stem cells to adhesion and culture at corresponding interfaces is investigated via immunostaining and confocal microscopy.

The Effects of Mechanical Load on Chondrogenic Responses of Bone Marrow Mesenchymal Stem Cells and Chondrocytes Encapsulated in Chondroitin Sulfate-Based Hydrogel.

Articular cartilage is vulnerable to mechanical overload and has limited ability to restore lesions, which leads to the development of chronic diseases such as osteoarthritis (OA). In this study, the chondrogenic responses of human bone marrow mesenchymal stem cells (BMMSCs) and OA cartilage-derived chondrocytes in 3D chondroitin sulfate-tyramine/gelatin (CS-Tyr)/Gel) hydrogels with or without experimental mechanical load have been investigated. Chondrocytes were smaller in size, had slower proliferation rate and higher level of intracellular calcium (iCa2+) compared to BMMSCs. Under 3D chondrogenic conditions in CS-Tyr/Gel with or without TGF-β3, chondrocytes more intensively secreted cartilage oligomeric matrix protein (COMP) and expressed collagen type II (COL2A1) and aggrecan (ACAN) genes but were more susceptible to mechanical load compared to BMMSCs. ICa2+ was more stably controlled in CS-Tyr/Gel/BMMSCs than in CS-Tyr/Gel/chondrocytes ones, through the expression of L-type channel subunit CaV1.2 (CACNA1C) and Serca2 pump (ATP2A2) genes, and their balance was kept more stable. Due to the lower susceptibility to mechanical load, BMMSCs in CS-Tyr/Gel hydrogel may have an advantage over chondrocytes in application for cartilage regeneration purposes. The mechanical overload related cartilage damage in vivo and the vague regenerative processes of OA chondrocytes might be associated to the inefficient control of iCa2+ regulating channels.

A Polymer Canvas with the Stiffness of the Bone Matrix to Study and Control Mesenchymal Stem Cell Response.

Reproducing in vitro the complex multiscale physical features of human tissues creates novel biomedical opportunities and fundamental understanding of cell-environment interfaces and interactions. While stiffness has been recognized as a key driver of cell behavior, systematic studies on the role of stiffness have been limited to values in the KPa-MPa range, significantly below the stiffness of bone. Here, a platform enabling the tuning of the stiffness of a biocompatible polymeric interface up to values characteristic of human boneisreported, which are in the GPa range, by using extremely thin polymer films on glass and cross-linking the films using ultraviolet (UV) light irradiation. Itisshown that a higher stiffness is related to better adhesion, proliferation, and osteogenic differentiation, and that it is possible to switch on/off cell attachment and growth by solely tuning the stiffness of the interface, without any surface chemistry or topography modification. Since the stiffness is tuned directly by UV irradiation, this platform is ideal for rapid and simple fabrication of stiffness patterns and gradients, thus representing an innovative tool for combinatorial studies of the synergistic effect of tissue environmental cues on cell behavior, and creates new opportunities for next-generation biosensors, single-cell patterning, and lab-on-a-chip devices.

Heat Shock Protein 27 Is Involved in the Bioactive Glass Induced Osteogenic Response of Human Mesenchymal Stem Cells.

Bioactive glass (BaG) materials are increasingly used in clinics, but their regulatory mechanisms on osteogenic differentiation remain understudied. In this study, we elucidated the currently unknown role of the p38 MAPK downstream target heat shock protein 27 (HSP27), in the osteogenic commitment of human mesenchymal stem cells (hMSCs), derived from adipose tissue (hASCs) and bone marrow (hBMSCs). Osteogenesis was induced with ionic extract of an experimental BaG in osteogenic medium (OM). Our results showed that BaG OM induced fast osteogenesis of hASCs and hBMSCs, demonstrated by enhanced alkaline phosphatase (ALP) activity, production of extracellular matrix protein collagen type I, and matrix mineralization. BaG OM stimulated early and transient activation of p38/HSP27 signaling by phosphorylation in hMSCs. Inhibition of HSP27 phosphorylation with SB202190 reduced the ALP activity, mineralization, and collagen type I production induced by BaG OM. Furthermore, the reduced pHSP27 protein by SB202190 corresponded to a reduced F-actin intensity of hMSCs. The phosphorylation of HSP27 allowed its co-localization with the cytoskeleton. In terminally differentiated cells, however, pHSP27 was found diffusely in the cytoplasm. This study provides the first evidence that HSP27 is involved in hMSC osteogenesis induced with the ionic dissolution products of BaG. Our results indicate that HSP27 phosphorylation plays a role in the osteogenic commitment of hMSCs, possibly through the interaction with the cytoskeleton.

Comparing the Therapeutic Mechanism and Immune Response of Human and Mouse Mesenchymal Stem Cells in Immunocompetent Mice With Acute Liver Failure.

Current mesenchymal stem cell (MSC) research is based on xenotransplantation of human MSCs (hMSCs) in immunodeficient mice and cannot comprehensively predict MSC repair mechanisms and immunomodulatory effects in damaged tissue. This study compared the therapeutic efficacy, mechanisms, and immune response of hMSCs and mouse MSCs (mMSCs) in immunocompetent mice with CCl4-induced acute liver failure. mMSCs maintained F4/80+ hepatic macrophage recruitment into the damaged liver region, increased IL-6-dependent hepatocyte proliferation, and reduced inflammatory TNF-α cytokine secretion. Moreover, mMSCs reduced α-SMA+ myofibroblast activation by lowering TGF-β1 accumulation in damaged liver tissue. In contrast, hMSCs lowered TNF-α and TGF-β1 by reducing the recruitment of F4/80+ hepatic macrophages, which lost the ability to remove debris and induce IL-6 liver regeneration. Finally, hMSCs, but not mMSCs, caused a significant antibody response in immunocompetent mice; therefore, hMSCs are unsuitable for long-term MSC studies. This comparative study provides reference information for further MSC studies of immunocompetent mice.

Single-cell dissection of the obesity-exercise axis in adipose-muscle tissues implies a critical role for mesenchymal stem cells: Cell Metab. 2022 Oct 4;34(10):1578–1593.e6

In this research, Yang et al. have done single cell analysis of obesity and exercise interactions to determine the response of mesenchymal stem cells (MSCs) white adipose and skeletal muscle tissue in mice models. The study concluded that, exercise and obesity have reverse effects on extracellular matrix (ECM) and genes involved in circadian rhythms in MSCs.

Response of mesenchymal stem cells to surface topography of scaffolds and the underlying mechanisms.

Mesenchymal stem/stromal cells (MSCs) serve as essential components of regenerative medicine. Their destiny is influenced by the interaction of the cells with the external environment. In addition to the biochemical cues in a microenvironment, physical cues of the topography of the surrounding materials such as the extracellular matrix emerge as a crucial regulator of stem cell destiny and function. With recent advances in technologies of materials production and surface modification, surfaces with micro/nanotopographical characteristics can be fabricated to mimic the micro/nanoscale mechanical stimuli of the extracellular matrix environment and regulate the biological behavior of cells. Understanding the interaction of cells with the topography of a surface is conducive to the control of stem cell fate for application in regenerative medicine. However, the mechanisms by which topography affects the biological behavior of stem cells have not been fully elucidated. This review will present the effects of surface topography at the nano/micrometer scale on stem cell adhesion, morphology, proliferation, migration, and differentiation. It also focuses on discussing current theories about the sensing and recognition of surface topology cues, the transduction of the extracellular cues into plasma, and the final activation of related signaling pathways and downstream gene expression in MSCs. These insights will provide a theoretical basis for the future design of biomaterial scaffolds for application in regenerative medicine and tissue engineering.

Black tantalic oxide submicro-particles coating on PEEK fibers woven into fabrics as artificial ligaments with photothermal antibacterial effect and osteogenic activity for promoting ligament-bone healing

• Black tantalic oxide (BTO) submicro-particles were prepared. • PEEK fibers with BTO coating were woven into fabrics (PBT) as artificial ligaments • PBT exhibited optimized surface properties and photothermal antibacterial effects. • PBT with excellent osteogenic activity promoted ligament-bone healing Design of artificial ligaments possessing both osteogenic activity and antibacterial effect that promotes ligament-bone healing and prevents bacterial infection in bone tunnels for anterior cruciate ligament (ACL) reconstruction remains a significant challenge. In this study, black tantalic oxide (BTO) submicro-particles with oxygen vacancies and structure defects were fabricated by using traditional white tantalic oxide (WTO) through magnesium thermal reduction (MTR) method, and BTO was coated on polyetheretherketone (PEEK) fibers (PKF), which were woven into fabrics (PBT) as artificial ligaments. PBT with BTO coating exhibited excellent photothermal performance, which possessed not only antibacterial effects in vitro but also anti-infective ability in vivo. PBT with optimized surface properties (e.g., submicro-topography and hydrophilicity) not only significantly facilitated rat bone mesenchymal stem cells (BMSC) responses (e.g., proliferation and osteogenic differentiation) in vitro but also stimulated new bone formation for ligament-bone healing in vivo. The presence of oxygen vacancies and structure defects in BTO did not change the surface properties and osteogenic activity of BPT while displaying an outstanding photothermal antibacterial effect. In summary, BPT with osteogenic activity and photothermal antibacterial effect promoted bone regeneration and prevented bacterial infection, thereby promoting ligament-bone healing. Therefore, PBT would have tremendous potential as a novel artificial ligament for ACL reconstruction.

Guideline for design of substrate stiffness for mesenchymal stem cell culture based on heterogeneity of YAP and RUNX2 responses.

Mesenchymal stem cells (MSCs) have the potential for self-renewal and multipotency to differentiate into various lineages. Thus, they are of great interest in regenerative medicine as a cell source for tissue engineering. Substrate stiffness is one of the most extensively studied exogenous physical factors; however, consistent results have not always been reported for controlling MSCs. Conventionally used stiff culture substrates, such as tissue-culture polystyrene and glass, enhance nuclear localization of a mechanotransducer YAP and a pre-osteogenic transcription factor RUNX2, and bias MSCs towards the osteogenic lineage, even without osteogenic-inducing soluble factors. The mechanosensitive nature and intrinsic heterogeneity present challenges for obtaining reproducible results. This review summarizes the heterogeneity in human MSC response, specifically, nuclear/cytoplasmic localization changes in the mechanotransducer yes-associated protein (YAP) and the osteogenic transcription factor RUNX2, in response to substrate stiffness. In addition, a perspective on the intracellular factors attributed to response heterogeneity is discussed. The optimal range of stiffness parameters, Young's modulus, for MSC expansion culture to suppress osteogenic differentiation bias through the suppression of YAP and RUNX2 nuclear localization, and cell cycle progression is likely to be surprisingly narrow for a cell population from an identical donor and vary among cell populations from different donors. We believe that characterization of the heterogeneity of MSCs and understanding their biological meaning is an exciting research direction to establish guidelines for the design of culture substrates for the sophisticated control of MSC properties.

A Facile Synthesis of P(VDF-TrFE)-Coated-PMMA Janus Membranes for Guided Bone Regeneration

Bone repair and regeneration have aroused widespread interest due to their potential usefulness in cases when bone self-healing is insufficient. In this work, a Poly(vinylidene fluoride-trifluoroethylene)-coated-Poly methyl methacrylate Janus membrane was prepared, where a P(VDF-TrFE) coating on a PMMA film serves as Janus-A to mediate cell growth behavior, owing to its electroactivity, and the PMMA film serves as Janus-B to inhibit soft-tissue growth. A P(VDF-TrFE) coating separated from the substrate was put above the PMMA film before the PMMA film had dried completely, and a Janus membrane formed because of the flowability and adhesion of the nonvolatile PMMA solution. Their bonding could withstand the pressure of the body fluids in the shear direction. Various crystallization substrates were also applied to modulate the P(VDF-TrFE) coating’s surface potentials, as the surface potential would further affect cellular response. It was also found that the responses of the bone marrow mesenchymal stem cells (BMSCs) and bone marrow macrophages (BMDMs) could be adjusted through surface potential modification. Such a Janus membrane could potentially be applied to a biological environment with the effect of both guiding bone regeneration and preventing soft tissue adhesion.

Species-Based Differences in Mechanical Properties, Cytocompatibility, and Printability of Methacrylated Collagen Hydrogels.

Collagen methacrylation is a promising approach to generate photo-cross-linkable cell-laden hydrogels with improved mechanical properties. However, the impact of species-based variations in amino acid composition and collagen isolation method on methacrylation degree (MD) and its subsequent effects on the physical properties of methacrylated collagen (CMA) hydrogels and cell response are unknown. Herein, we compared the effects of three collagen species (bovine, human, and rat), two collagen extraction methods (pepsin digestion and acid extraction), and two photoinitiators (lithium phenyl-2,4,6-trimethylbenzoylphosphinate (LAP) and Irgacure-2959 (I-2959)) on the physical properties of CMA hydrogels, printability and mesenchymal stem cell (MSC) response. Human collagen showed the highest MD. LAP was more cytocompatible than I-2959. The compressive modulus and cell viability of rat CMA were significantly higher (p < 0.05) than bovine CMA. Human CMA yielded constructs with superior print fidelity. Together, these results suggest that careful selection of collagen source and cross-linking conditions is essential for biomimetic design of CMA hydrogels for tissue engineering applications.

The JNK-EGR1 signaling axis promotes TNF-α-induced endothelial differentiation of human mesenchymal stem cells via VEGFR2 expression.

Mesenchymal stem cells (MSCs) can differentiate into endothelial cells; however, the mechanisms underlying this process in the tumor microenvironment (TME) remain elusive. This study shows that tumor necrosis factor alpha (TNF-α), a key cytokine present in the TME, promotes the endothelial differentiation of MSCs by inducing vascular endothelial growth factor receptor 2 (VEGFR2) gene expression. EGR1 is a member of the zinc-finger transcription factor family induced by TNF-α. Our findings indicate that EGR1 directly binds to the VEGFR2 promoter and transactivates VEGFR2 expression. We also demonstrate that EGR1 forms a complex with c-JUN activated by c-JUN N-terminal kinase (JNK) to promote VEGFR2 transcription and endothelial differentiation in MSCs in response to TNF-α stimulation. The shRNA-mediated silencing of EGR1 or c-JUN abrogates TNF-α-induced VEGFR2 transcription and the endothelial differentiation of MSCs. To further evaluated the role of EGR1 in the endothelial differentiation of BM-MSCs, we used a syngenic tumor implantation model. 4T1 mouse mammary tumor cells were injected subcutaneously into BALB/c mice with primary mBM-MSCs isolated from wild-type (Egr1+/+) or Egr1-null (Egr1-/-) mice. CD31-positive cells were predominantly observed at the border of the tumor in the 4T1 plus wild-type MSC group, while staining less in the 4T1 alone or 4T1 plus Egr1-null MSC group. Collectively, these findings demonstrate that the JNK-EGR1 signaling axis plays a crucial role in the TNF-α-induced endothelial differentiation of MSCs in the TME, which could be a potential therapeutic target for solid tumors vasculatures.

Surface characterizations and cell growth of rough zirconia surfaces immobilized with different BMP-2 concentrations using natural crosslinker genipin

Zirconia (ZrO2) is widely used in the dental implant industry, due to its good mechanical properties and biocompatibility. However, the bioinert nature of ZrO2 may hinder osseointegration. This study investigated the responses of human bone marrow mesenchymal stem cells (hMSCs) to sandblasted ZrO2 surfaces immobilized with bone morphogenetic protein-2 (BMP-2) using the natural crosslinker genipin. The immobilization of BMP on sandblasted ZrO2 surfaces increased the surface roughness but did not alter the wettability. The focal adhesion activation and later-stage mineralization of hMSCs were higher on BMP-2-modified ZrO2 surfaces than on untreated surfaces. The BMP-2-modified ZrO2 surfaces with low (100 ng/mL) and high (500 ng/mL) concentrations showed no significant difference in later-stage osteogenic response. However, ZrO2 surfaces with low BMP-2 concentration earlier stimulated the p38 (mitogen-activated protein kinase pathway) protein expression, osteogenic early marker osteopontin expression, and later-stage mineralization. This simple but effective process to immobilize BMP-2 on rough ZrO2 surfaces can benefit future dental implant applications.

The osteogenetic activities of mesenchymal stem cells in response to Mg2+ ions and inflammatory cytokines: a numerical approach using fuzzy logic controllers.

Magnesium (Mg2+) ions are frequently reported to regulate osteogenic activities of mesenchymal stem cells (MSCs). In this study, we propose a numerical model to study the regulatory importance of Mg2+ ions on MSCs osteoblastic differentiation in the presence of an inflammatory response. A fuzzy logic controller was formulated to receive the concentrations of Mg2+ ions and the inflammatory cytokines of TNF-α, IL-10, IL-1β, and IL-8 as cellular inputs and predict the cells’ early and late differentiation rates. Five sets of empirical data obtained from published cell culture experiments were used to calibrate the model. The model successfully reproduced the empirical data regarding the concentration- and phase-dependent effect of Mg2+ ions on the differentiation process. In agreement with the experiments, the model showed the stimulatory role of Mg2+ ions on the early differentiation phase, once administered at low concentration, and their inhibitory role on the late differentiation phase. The numerical approach used in this study suggested 6–8 mM as the most effective concentration of Mg2+ ions in promoting the early differentiation process. Also, the proposed model sheds light on the fundamental differences in the behavioral properties of cells cultured in different experiments, e.g. differentiation rate and the sensitivity of the cultured cells to stimulatory signals such as Mg2+ ions. Thus, it can be used to interpret and compare different empirical findings. Moreover, the model successfully reproduced the nonlinearities in the concentration-dependent role of the inflammatory cytokines in early and late differentiation rates. Overall, the proposed model can be employed in studying the osteogenic properties of Mg-based implants in the presence of an inflammatory response.

Independent control of molecular weight, concentration, and stiffness of hyaluronic acid hydrogels

Hyaluronic acid (HA) hydrogels have been used for a multitude of applications, perhaps most notably for tissue engineering and regenerative medicine, owing to the versatility of the polymer and its tunable nature. Various groups have investigated the impact of hydrogel parameters (e.g. molecular weight, concentration, stiffness, etc) in vitro and in vivo to achieve desired material performance characteristics. A limitation in the literature to date has been that altering one hydrogel parameter (a ‘manipulated variable’) to achieve a given hydrogel characteristic (a ‘controlled variable’) changes two variables at a time (e.g. altering molecular weight and/or concentration to investigate cell response to stiffness). Therefore, if cell responses differ, it may be possible that more than one variable caused the changes in observed responses. In the current study, we leveraged thiol-ene click chemistry with a crosslinker to develop a method that minimizes material performance changes and permitted multiple material properties to be independently held constant to evaluate a single variable at a time. Independent control was accomplished by tuning the concentration of crosslinker to achieve an effectively constant stiffness for different HA hydrogel molecular weights and polymer concentrations. Specific formulations were thereby identified that enabled the molecular weight (76–1550 kDa), concentration (2%–10%), or stiffness (∼1–350 kPa) to be varied while the other two were held constant, a key technical achievement. The response of rat mesenchymal stem cells to varying molecular weight, concentration, and stiffness demonstrated consistent upregulation of osteocalcin gene expression. The methodology presented to achieve independent control of hydrogel parameters may potentially be adopted by others for alternative hydrogel polymers, cell types, or cell culture medium compositions to minimize confounding variables in experimental hydrogel designs.

Low-level laser therapy with different irradiation methods modulated the response of bone marrow mesenchymal stem cells in vitro.

Low-level laser therapy (LLLT) also known as photobiomodulation is a treatment to change cellular biological activity. The exact effects of LLLT remain unclear due to the different irradiation protocols. The purpose of this study was to investigate the effects of LLLT by three different irradiation methods on the proliferation and osteogenic differentiation of bone marrow mesenchymal stem cells (BMSCs) in vitro. BMSCs were inoculated in 24-well plates and then irradiated or not (control) with a laser using three different irradiation methods. The irradiation methods were spot irradiation, covering irradiation, and scanning irradiation according to different spot areas (0.07 cm2 or 1.96 cm2) and irradiation areas (0.35 cm2 or 1.96 cm2), respectively. The laser was applied three times at energy densities of 4J/cm2. The cell proliferation by CCK-8. ALP activity assay, alizarin red, and quantitative real-time polymerase chain reaction (RT-PCR) were performed to assess osteogenic differentiation and mineralization. Increases in cell proliferation was obvious following irradiation, especially for covering irradiation. The ALP activity was significantly increased in irradiated groups compared with non-irradiated control. The level of mineralization was obviously improved following irradiation, particularly for covering irradiation. RT-PCR detected significantly higher expression of ALP, OPN, OCN, and RUNX-2 in the group covering than in the others, and control is the lowest. The presented results indicate that the biostimulative effects of LLLT on BMSCs was influenced by t he irradiation method, and the covering irradiation is more favorable method to promote the proliferation and osteogenic differentiation of BMSCs.