Formaldehyde Removal Efficiency Research Articles

Impact of microaeration bioreactor on dissolved sulfide and methane removal from real UASB effluent for sewage treatment.

Two bioreactors were investigated as an alternative for the post-treatment of effluent from an upflow anaerobic sludge blanket (UASB) reactor treating domestic sewage, aiming at dissolved sulfide and methane removal. The bioreactors (R-control and R-air) were operated at different hydraulic retention times (HRT; 6 and 3 h) with or without aeration. Large sulfide and methane removal efficiencies were achieved by the microaerated reactor at HRT of 6 h. At this HRT, sulfide removal efficiencies were equal to 61% and 79%, and methane removal efficiencies were 31% and 55% for R-control and R-air, respectively. At an HRT of 3 h, sulfide removal efficiencies were 22% (R-control) and 33% (R-air) and methane removal did not occur. The complete oxidation of sulfide, with sulfate formation, prevailed in both phases and bioreactors. However, elemental sulfur formation was more predominant at an HRT of 6 h than at an HRT of 3 h. Taken together, the results show that post-treatment improved the anaerobic effluent quality in terms of chemical oxygen demand and solids removal. However, ammoniacal nitrogen was not removed due to either the low concentration of air provided or the absence of microorganisms involved in the nitrogen cycle.

Enhancement of the methane removal efficiency via aeration for biochar-amended landfill soil cover

Methane (CH4) mitigation of biocovers or biofilters for landfills is influenced by the bed material and oxygen availability. The improvement of active aeration for the CH4 oxidation efficiency of biochar-amended landfill soil cover was investigated over a period of 101 days. There were column 1 as the control group, column 2 with biochar amending the soil cover, and column 3 with daily active aeration besides the same biochar amendment. All groups were inoculated with enriched methane oxidation bacteria (MOB). The average CH4 removal efficiency was up to 78.6%, 85.2% and 90.6% for column 1, 2, and 3, respectively. The depth profiles of CH4 oxidation efficiencies over the whole period also showed that the stimulation of CH4 oxidation by biochar amendment was apparent in the top 35 cm but became very faint after two months. This probably was due to the rapid depletion of nitrogen nutrition caused by enhanced methanotrophic activities. While through aeration, CH4 oxidation efficiency was further improved for column 3 than column 2. This enhancement also lasted for the whole period with a reduced decline of CH4 oxidation. Finally, the major MOB Methylocystis, commonly found in the three columns, were most abundant in the top 35 cm for column 3. A more balanced ratio of MOB and more homogeneous microbial community structures across different soil depths were also the results of active aeration.

Simultaneous nitrogen and dissolved methane removal from an upflow anaerobic sludge blanket reactor effluent using an integrated fixed-film activated sludge system

One of the main drawbacks of upflow anaerobic sludge blanket (UASB) reactors that treat low-strength sewage at room temperature is related to the low quality of their effluents in terms of dissolved methane, organic matter, and nitrogen content. The present study aims to evaluate the feasibility of using an integrated fixed-film activated sludge (IFAS) system as an alternative post-treatment technology to mitigate the environmental impact of such effluents. For this purpose, a pilot plant composed of a UASB (120 L) followed by an IFAS (66 L) system was operated for 407 days. Special attention was paid to the suspended biomass retention capacity and the dissolved methane and nitrogen removal potential of the IFAS post-treatment system. Furthermore, the role of carriers on denitrification and nitrification processes and the microbial communities present in the biofilm were also analyzed. Average total chemical oxygen demand (CODT) and ammonium removal efficiencies of 92 ± 3% and around 57 ± 16% were attained throughout the entire operation, respectively. During a first period in which biomass was maintained in both biofilms and suspension, and nitrite was the main electron acceptor, maximum nitrogen removal and methane removal efficiencies of 32.5 mg TN L-1 and 93% were observed in the IFAS system, respectively. However, throughout the second period, in which suspended biomass was completely washed out from the IFAS system, and nitrate became the main electron acceptor, these values decreased to 18 ± 4 mg TN Lfeed-1 and 77 ± 12%, respectively. Surprisingly, throughout the entire operation, it was observed that around 50 and 41% of the total nitrogen and methane removals observed in the IFAS system, respectively, were carried out in the aerobic compartment. Aerobic methane oxidizers and anammox were detected with significant relative abundances in the biofilm carriers used in the anoxic and aerobic compartments using 16S rRNA gene amplicon sequencing analysis. Therefore, the use of an IFAS system could be suited to diminish greenhouse gas emissions and nutrients concentration for those sewage treatment plants that used UASB systems, especially in countries with temperate and warm climates.

Methane Emission Reduction Enhanced by Hydrophobic Biochar-Modified Soil Cover

The microbial oxidation of CH4 in biochar-modified soil cover is considered a potent option for the mitigation of emissions from old landfills or sites containing wastes full of low CH4 generation rates. The mechanism of methane oxidizing bacteria (MOB) can be enhanced by amending the landfill cover soil with biochar, which is recalcitrant to biological degradation and can adsorb CH4 while facilitating the growth and activity of MOB within its porous structure. However, the increase in the permeability coefficient and water content of the cover due to the addition of biochar also affects the methane removal efficiency. A hydrophobic biochar modified by KH-570 was employed to reduce the water content and to promote the diffusion and oxidation of CH4 in the cover. Several series of small-scale column tests were conducted to quantify the CH4 oxidation properties of the landfill cover soil amended with biochar and hydrophobic biochar under different levels of exposed CH4 concentrations (5% and 15%), heights (10–66 cm), and temperatures (15–40 °C). After 30 days of domestication, the removal rate of the hydrophobic biochar-modified soil cover reached 98.8%. The water holding capacity of the cover and the CH4 oxidation efficiency under different moisture contents were investigated in different columns. The hydrophobic biochar-modified soil cover has a weak water holding capacity, low saturated water content, and optimal CH4 oxidation efficiency at this time.

Indoor formaldehyde removal by three species of Chlorphytum Comosum under the long-term dynamic fumigation system.

Gaseous formaldehyde removal efficiency and physiological characteristics of leaves were investigated through a dynamic fumigation system. Three different species of potted Chlorophytum Comosum, (Green Chlorophytum Comosum for its green leaves), CC (Combined the leaves of Chlorophytum Comosum with leaves half green and half white) and PC (Purple Chlorophytum Comosum for its purple leaves), were exposed to formaldehyde for 7 days. The results showed formaldehyde removal efficiencies in the daytime were 71.07% ± 0.23, 84.66% ± 0.19, and 46.73% ± 0.15 at 1 ppm for GC, CC, and GC plants, respectively, and were 36.21% ± 0.24, 62.15% ± 0.19, and 34.97% ± 0.11 at night. This might be due to higher plant physiological activities (e.g., photosynthesis, respiration, and transpiration) during the daytime than at night. Ten physiological indicators of leaves were chosen to evaluate the 7-day fumigation process, which were chlorophyll, free protein, relative conductivity, malondialdehyde (MDA), hydrogen peroxide (H2O2), hydroxyl radical, superoxide dismutase (SOD), peroxidase (POD), catalase (CAT), and total antioxidant capacity (T-AOC). Eight of these indicators increased, while chlorophyll decreased by 22.16%, 6.95%, and 25.32%, and CAT decreased by 18.9%, 17.8%, and 25.30% for GC, CC, and PC respectively. Among all the increasing physiological indicators, relative conductivity and MDA showed the greatest increase by 279.32% and 155.56% for PC. A 15-day recovery study was also conducted using MDA and T-AOC as indicators. The results showed that all the tested plants could be tolerant up to the 8 ppm of formaldehyde concentration for 7 days under dynamic fumigation and needed 10-15 days for self-recovery.

Simultaneous mitigation of methane and odors in a biowindow using a pipe network

In this study, a biowindow with a piped gas collection network is proposed as an area-efficient landfill gas treatment system. A 9-m2 biowindow was constructed for treating landfill gas collected from an area of 450 m2 in a sanitary landfill, and its performance was evaluated for 224 days. The methane removal efficiency was 59–100% at 146.3–675.1 g-CH4 m−2 d−1. Odorous compounds were also removed by the biowindow, with a complex odor intensity removal rate of 93–100%. In particular, the removal efficiency for hydrogen sulfide and methanethiol, major contributors to the complex odor intensity, was 97% and 91%, respectively. Metagenomic analysis showed that the dominant bacterial genera shifted from Acinetobacter and Pseudomonas to Methylobacter and Methylocaldum due to the high concentration of methane. A high bacterial diversity was maintained, which may have contributed to the robust performance of the biowindow against environmental fluctuations. At 1/50th of the size of conventional biocovers, the proposed biowindow can greatly reduce the required installation area and represents a competitive method for the simultaneous treatment of methane and odor in landfills.

Performance and microbial ecology of methane-driven microbial fuel cells at temperatures ranging from 25 to 5 °C

The effluent of mainstream anaerobic processes is saturated with dissolved methane, representing a lost energy source and potent greenhouse gas emission if left unmanaged. This study investigated the impact of operational temperature on methane-driven microbial fuel cells (MFCs) designed for continuous operation to mitigate dissolved methane emissions in anaerobic effluents. Two bench-scale, single-chamber MFCs were operated sequentially at 25, 20, 15, 10 and 5 °C. Voltage production from both MFCs ranged from approximately 0.463 to 0.512 V over 1 kΩ resistance at temperatures ≥15 °C, but abruptly dropped as temperature decreased to 10 and 5 °C, averaging just 0.156 and 0.190 V for the replicate systems. Dissolved methane removal efficiency remained relatively stable across all operational temperatures, ranging from 53.0% to 63.6%. High-throughput sequencing of 16S rRNA genes and reverse transcription quantitative polymerase chain reaction indicated distinct distribution of methanotrophs (e.g., Methylomonas) and exoelectrogens (e.g., Geobacter) on the cathode and anode, respectively. Spearman's rank correlation suggested that an indirect interaction between methanotrophs and exoelectrogens via fermentative bacteria (e.g., Acetobacterium) may play a role in system function. Notably, diversity of the anode microbial community was positively correlated with both voltage production and Coulombic efficiency, suggesting overall diversity, as opposed to abundance or activity of exoelectrogens, was the primary factor governing performance at varying temperatures.

Removal of formaldehyde from the air with a suspended growth bioreactor

In the present study, the root zone of Canna flaccida Salisb. was selected as the biological component. We found that the adsorption rate of formaldehyde (FA) by C. flaccida was initially low, before increasing substantially. 13CNMR analysis indicated that C. flaccida can metabolize H13CHO and the major metabolic products were organic acid and amino acids. On this basis, we had designed a suspended growth bioreactor (SGB) to remove FA. An SGB was tested under a series of different conditions and the results showed that FA removal efficiency was strongly influenced by water volume, root zone weight, and gas flow rate. More than 52% of the FA was removed in 1 h and the maximum elimination capacity reached 35.112 mg m−3 h−1. After 24 h, no FA remained in the SGB. Running for 15 days, the concentration of FA in the lab space decreased from 1.12 to 0.82 mg m−3, and the concentration of FA in the SGB reached a low level. These results confirmed that SGB is an effective way to remove FA.

Predicting Removal Efficiency of Formaldehyde from Synthetic Contaminated Air in Biotrickling Filter Using Artificial Neural Network Modeling

AbstractFormaldehyde (FA) is considered a toxic and mutagenic compound that is suspected to be carcinogenic for humans. FA is widely emitted to the atmosphere by several chemical industries. Theref...

Efficient removal of gaseous formaldehyde by amine-modified diatomite: a combined experimental and density functional theory study.

Amine-modified diatomite with remarkable formaldehyde (HCHO) removal efficiency was prepared by grafting 3-aminopropyltrimethoxysilane (APTMS) in this research. The interfacial properties and microstructures of the prepared adsorbents were characterized and analyzed. The HCHO adsorption properties of the amine modified diatomite were also systematically studied, and it has been proven to be effective adsorbent with better adsorption performance than activated carbon for the removal of gaseous HCHO. Furthermore, to better explain the experimental results, we performed density functional theory (DFT) study on the adsorption system and calculated the geometry, energy, and charge parameters based on first principles. Also, the underlying adsorption mechanism was proposed detailedly by combining experimentation with DFT calculation, suggesting that amine modified diatomite can be efficient adsorbent for the elimination of gaseous formaldehyde.

Removal performance of formaldehyde by ceiling tiles as sorptive passive panels

In this study a ceiling tile (CT) was selected as a sorptive passive panel, and the effect of environmental conditions on its formaldehyde removal efficiency was evaluated. Experiments were performed in a 0.4 m3 chamber with the air flow rate of 0.2 m3 h−1, the air exchange rate of the 0.5 h−1, and the loading ratio of 0.23m2m-3. The range of temperature humidity levels varied between 21 °C ± 2 °C–26 °C ± 2 °C, and 30% ± 5%–75% ± 5%, respectively, to simulate the indoor conditions for Canadian homes during most months of the year. Results demonstrated formaldehyde removal efficiency between 40% and 75% depending on the applied environmental conditions. GC/MS and HPLC trace analyses revealed that only very low concentrations of by-products were formed. The by-product formation increased slightly when exposing the ceiling tile to relatively high relative humidity (RH = 75%) and temperature (T = 26 °C). Given a loading factor of only 0.23 m2 m−3in our test chamber, which in most scenarios underestimates the loading factor in real settings, our findings suggest that ceiling tiles used as passive removal panels have the potential to lower formaldehyde concentrations under the Health Canada's guideline for residential settings under real-life conditions.

Advanced oxidation of formaldehyde in the aqueous solutions using UVC/S2 O8 2- process: Degradation and mineralization

Background: As a human carcinogen, formaldehyde is a toxic chemical imposing adverse effects on public health and environment. Due to its high reactivity, colorless nature, sustainability, purity in commercial forms, and low prices, the production and consumption of this compound has expanded vastly in industries. Methods: In this study, a UVC photoreactor with a total volume of 120 mL was used and operated in a rotary mode. To determine the residual concentration, high-performance liquid chromatography (HPLC) device was applied whose detector was set at a wavelength of 355 nm and equipped with C18 column (with dimensions of 25 × 4.6 mm i.d, and particle size of 5 µm). Total organic carbon (TOC) was determined using a TOC analyzer. Results: The optimal condition in this study was obtained at pH=3 and formaldehyde concentration of 350 mg, so that the removal of formaldehyde and TOC was 98.2% and 95.1%, respectively, after 35 minutes reaction time. The formaldehyde removal efficiency was assessed in the presence of methanol (MeOH), tert-butyl alcohol (TBA), and salicylic acid (SA) scavengers, and it was indicated that SO4 •- radicals were the most effective factors in formaldehyde destruction. By increasing the concentrations of MeOH, TBA, and SA to 2.5 g/L, the degradation efficiency of formaldehyde dropped from 98.02% to 69.78%, 64.68%, and 45.14%, respectively, at 35 minutes reaction time. The removal of formaldehyde in the presence of nitrate was significantly reduced and it had a significant effect on the removal of formaldehyde. Conclusion: In this study, the removal of formaldehyde was investigated in the presence of various anions including bicarbonate, carbonate, chloride, sulfate, and nitrate. According to the results, the UVC/S2 O8 2- process is a convenient and cost-effective method for the removal of formaldehyde.

Optimisation of bioscrubber systems to simultaneously remove methane and purify wastewater from intensive pig farms.

The use of bioscrubber is attracting increasing attention for exhaust gas treatment in intensive pig farming. However, the challenge is to improve the methane (CH4) removal efficiency as well as the possibility of pig house wastewater treatment. Three laboratory-scale bioscrubbers, each equipped with different recirculation water types, livestock wastewater (10-times-diluted pig house wastewater supernatant), a methanotroph growth medium (10-times-diluted), and tap water, were established to evaluate the performance of CH4 removal and wastewater treatment. The results showed that enhanced CH4 removal efficiency (25%) can be rapidly achieved with improved methanotrophic activity due to extra nutrient support from the wastewater. The majority of the CH4 was removed in the middle to end part of the bioscrubbers, which indicated that CH4 removal could be potentially optimised by extending the length of the reactor. Moreover, 52-86% of the ammonium (NH4+-N), total organic carbon (TOC), and phosphate (PO43--P) removal were simultaneously achieved with CH4 removal in the present study. Based on these results, this study introduces a low-cost and simple-to-operate method to improve CH4 removal and simultaneously treat pig farm wastewater in bioscrubbers.

A comparative study of the effect of compost/woodchips mixture, natural zeolite and zeolite/activated carbon mixture as packing materials on the biofilter performance

The removal of formaldehyde from contaminated air was investigated via three laboratory-scale biofilters packed with different materials: a mixture of compost and woodchips (І), the natural clinoptilolite zeolite particles in the original form (II), and the mixture of zeolite/activated carbon (III). The biofilters were inoculated using aerobic sludge. The average removal efficiencies of 97.5%, 90%, and 93.5% were obtained at a 100 s empty bed residence time (EBRT) and 20 mg/m3 inlet concentration of formaldehyde for the biofilter of configurations І, II, and III, respectively. Also, the performance of the reactors was investigated at different EBRTs of 20, 30, 60, and 100 s, and the maximum elimination capacity of 2840 mg/m3.h was achieved at the lowest EBRT (20 s) for the biofilter of configuration II. Increasing the inlet formaldehyde concentration from 20 mg/m3 to 80 mg/m3 led to the maximum formaldehyde removal efficiency of 82% for the biofilter of configuration III. Therefore, a comparison of the results of the biofilters' performances showed that the biofilter of configuration III had the best performance, which was validated by obtaining a higher mass transfer coefficient. However, the biofilter of configurations II and III achieved steady-state conditions in a shorter time.

Minimization of dissolved methane, nitrogen and organic micropollutants emissions of effluents from a methanogenic reactor by using a preanoxic MBR post-treatment system

The use of a hybrid membrane bioreactor (MBR) post-treatment system is proposed as a cost-efficient technology in order to minimize the environmental impact of anaerobic effluents, treating low-strength sewage at room temperature, such as their high nitrogen content and the presence of dissolved methane. In this research, nitrite was externally added at different concentrations into the anoxic compartment, providing an extra electron acceptor besides the existing nitrate, to evaluate its effect on denitrification, methane oxidation and OMPs removal processes. The nitrite addition significantly improved the denitrification potential of the system, achieving nitrogen removals up to 35 mg TN L−1. Moreover, higher nitrite concentrations clearly promoted an increase in the removal of some organic micropollutants (OMPs) such as diclofenac (DCF), ethinylestradiol (EE2), triclosan (TCS) and ibuprofen (IBP). Nevertheless, methane removal efficiencies or rates were not affected by this fact. Finally, COD and ammonium removals higher than 99 and 91% were observed during the entire operation, respectively. Based on the results, a future strategy in which ammonium is partially oxidized to nitrite could result in better nitrogen and OMPs removals for the proposed technology.

A Case Study of an Optimized Intermittent Ventilation Strategy Based on CFD Modeling and the Concept of FCT

With the increasing operation costs and implementation of carbon tax in the underground coal mining systems, a cost-effective ventilation system with well methane removal efficiency becomes highly required. Since the intermittent ventilation provides a novel approach in energy saving, there still exists some scientific issues. This paper adopts the design concept of frequency conversion technology (FCT) to the ventilation pattern design for the first time, and an optimized intermittent ventilation strategy is proposed. Specifically, a real excavation laneway of a coal mine in China is established as the physical model, and computational fluid dynamic (CFD) approaches are utilized to investigate the spatiotemporal characteristics of airflow behavior and methane distribution. Plus, the period of intermittency and appropriate air velocity are scientifically defined based on the conception of FCT by conducting the parametric studies. Therefore, an optimized case is brought out with well methane removal efficiency and remarkable energy reduction of 39.2% in a ventilation period. Furthermore, the simulation result is verified to be reliable by comparing with field measurements. The result demonstrates that a balance of significant energy saving and the methane removal requirement based on the concept of FTC is possible, which could in turn provide good operational support for FTC.

Efficiency and mechanism of formaldehyde removal from air by two wild plants; Plantago asiatica L. and Taraxacum mongolicum Hand.-Mazz.

Indoor potted plants played an important role in the removal of air-borne VOCs. According to the difference between plant fresh extracts and boiled extracts on breakdown ability to the added formaldehyde, a simple quantitative evaluation method was used to identify the mechanisms of formaldehyde removal from the air by wild Taraxacum mongolicum Hand.-Mazz. and Plantago asiatica L.. After shoots exposure to formaldehyde (1.28mg/m3 in the air) for 24h, the formaldehyde removal rates of P. asiatica and T. mongolicum were 73.18 and 121.20mg/h/kg FW (fresh weight), respectively. Formaldehyde can be transported from the air to the rhizosphere solution by plants, and the maximum rates of transmission by T. mongolicum and P. asiatica were 23.73 and 83.08mg/h/kg FW, respectively. Although plant metabolism was responsible for formaldehyde loss in the air-plant-solution system, and the metabolic activity depended on the enzymatic and redox reactions in the plants, P. asiatica and T. mongolicum are still good candidate species for developing phyto-microbial technologies. The redox reaction was the main mechanism used by P. asiatica shoots to dissipate formaldehyde, while the enzymatic reaction was the main mechanism used by T. mongolicum. The higher oxidative potential and lower defensive enzyme activity in P. asiatica shoots led to its higher formaldehyde removal rate compared to T. mongolicum. Meanwhile, the stronger redox reaction ability in the T. mongolicum roots was partly responsible for its lower formaldehyde transmission rate. The results show two plants have strong tolerance to formaldehyde in the air and good formaldehyde removal ability.

An Industrial Scale Synthesis of Adipicdihydrazide (ADH)/Polyacrylate Hybrid with Excellent Formaldehyde Degradation Performance.

A simple and versatile route for industrial scale synthesis of adipicdihydrazide (ADH)/polymer hybrids with excellent performance of formaldehyde degradation is proposed in this paper. The ADH compound is uniformly dispersed in poly(methyl methacrylate-butyl acrylate-methacrylic acid) (P(MMA-BA-MAA)) latex, which is validated by UV and dispersibility tests. The results illustrate that ADH has excellent compatibility and dispersion stability without affecting the film formation of the polymer latex. Furthermore, scanning electron microscope (SEM) and mapping analysis of the hybrid films also demonstrate that ADH is homogenously dispersed in the polymer matrix. Compared with neat polymers, the thermal properties of hybrid films are improved, for example, T0.5 increases by 8.3 °C. According to qualitative tests of the 4-amino-3-hydrazino-5-mercapto-1,2,4-triazol-red/green/blue (AHMT-RGB) method, the hybrid films demonstrate high formaldehyde removal efficiency. On the basis of the semi-quantitative test of Fourier Transform infrared spectroscopy (FTIR) measurements, the rate of formaldehyde degradation can reach 1.034 × 102 mol/(h·m3) for the hybrid film with 5 wt% ADH.

Roles of reactive oxygen species and antioxidant enzymes on formaldehyde removal from air by plants

The roles of enzymatic reactions and redox reactions caused by reactive oxygen species (ROS) in formaldehyde metabolism in tomatoes and wheat seedlings and the changes in peroxidase (POD) and catalase (CAT) activities in plants were investigated. Differences in the breakdown of added formaldehyde between fresh and boiled plant extracts were determined to calculate the contributions of different removal mechanisms. Two plant seedlings efficiently removed formaldehyde from air when its level varied from 0.65 to 1.91 mg m−3; meanwhile, the maximum rate at which tomato seedlings transported formaldehyde from air to the rhizosphere solution reached 182.26 µg h−1 kg−1 FW (fresh weight). Metabolism in plants was mainly responsible for the formaldehyde dissipation. The enzymatic contribution to formaldehyde dissipation decreased with increasing shoot exposure time or air formaldehyde level, while the redox contribution increased in importance because of an increasing level of ROS. The different enzymatic antioxidant activities of plants resulted in different levels of ROS and hence different tolerance and removal efficiencies toward formaldehyde. The self-enhancing ability of plants to remove formaldehyde via redox reactions suggested that the formaldehyde removal efficiency could be enhanced by plant adaptation to environmental stress.

Removal efficiency and mechanisms of formaldehyde by five species of plants in air-plant-water system

ABSTRACTThe foliar uptake and transport rates of formaldehyde as well as the abilities of leaf extracts to breakdown formaldehyde were investigated to discuss the formaldehyde removal efficiency and mechanism by five species of plants from air. Results showed that formaldehyde could be transported from air via leaves and roots to rhizosphere water. When exposed to 0.56 mg·m−3 formaldehyde, the formaldehyde removal rate ranged from 18.64 to 38.47 μg·h−1g−1 FW (fresh weight). According to the mass balance in the air–plant–water system, the main mechanism of the formaldehyde loss was its breakdown in plant tissues caused by both enzymatic reaction and redox reaction. Higher oxidation potentials of the leaf-extracts of Wedelia chinensis and Desmodium motorium corresponded well to higher abilities to breakdown added formaldehyde than other plants. Based on the different abilities of fresh and boiled leaf-extracts to dissipate formaldehyde, the enzymatic reaction in Chenopodium album L. was the dominant mechanism while the redox reaction in Kochia scoparia (L.) Schrad. and Silene conoidea L. was the main formaldehyde breakdown mechanism when exposed to low-level formaldehyde in air. The redox mechanism suggested that the formaldehyde removal may be increased by an increasing level of reactive oxygen species (ROS) induced by the environmental stress.