Reduced Gas Production Research Articles

Mechanisms and field application of in-situ heat injection-enhanced gas drainage

The low permeability of coal seams and strong adsorption of methane considerably inhibit gas drainage; thus, developing a method for efficient gas drainage is crucial. The heat injection-enhanced gas drainage tests were carried out in the laboratory and coal mine, and the gas drainage effect and mechanism of heat injection method were studied. Then, through numerical simulation, the gas production law of heat injection method was analyzed from the perspective of water and gas migration. Indoor experiments demonstrated that heat injection strengthened methane desorption and relieved the inhibitory effect of water on gas. The gas drainage effect of field tests was remarkable, and the gas concentration and daily gas production increased by over 10 and 100 times, respectively. During heat injection, water occupied the migration channel of gas, and the inhibition of water on gas was greater than the promotion of temperature, resulting in the reduction of gas production; After heat injection, high temperature promoted gas desorption and relieved the inhibition of water on gas, resulting in a significant increase in gas production. The gas production law obtained from the numerical simulation showed a high degree of consistency with field tests. The results can provide a reference for gas control.

Study on dynamic wear law of PDC bit under temperature effect

Accurate prediction of the PDC bit wear trend and life is of great significance for improving oil and gas drilling efficiency and reducing oil and gas production costs. However, due to the combination of high temperature and load, the interaction between cutter wear, force, and body temperature changes dynamically in real-time, making it a challenge to accurately predict the life of bit cutters. This paper aims to explore the dynamic wear law of the PDC bit under temperature effect. Firstly, the PDC cutter wear experiment under the temperature effect is studied, and the microstructure and phase changes after exposure to high temperature are characterized. Then, the PDC cutter mathematic models of volume wear, line wear, cutting force, and cutter temperature rise are constructed. Finally, the dynamic wear law of the PDC bit is studied by numerical simulation. The results show that when the rake angle is 12.86°, it has better wear resistance and longer drilling footage. Increasing the footage per turn of the PDC bit aids in lowering the wear degree within the permitted range of weight-on-bit (WOB). With each increase in drillable grade, the depth of drilling achieved by PDC bits at the same wear height decreases by more than 50%. The final wear height of the PDC bit cutter considering the temperature effect is about twice that without considering the thermal effect. The numerical calculation method proposed in this paper can calculate parameters such as dynamic force change, dynamic temperature change and dynamic wear height of PDC bit during drilling, and has the advantages of fast calculation speed and diversified analysis types. The research results provide a theoretical basis and support for the life prediction of worn PDC bits.

Ways of transforming the organization strategy of the oil and gas complex within the concept of sustainable development

Subject. The article considers the issue of oil and gas complex management. Objectives. The aim is to analyze the impact of the oil and gas complex on the environment, socio-economic development of Russia as a whole. Methods. The study draws on methods of systems, comparative, structural, and logical analyses. Results. The paper demonstrates opportunities associated with the implementation of the strategy for oil and gas complex development, with creation of new technologies and products enabling Russian companies to remain competitive in the face of rapid changes in the oil and gas market. Conclusions. Under conditions of reduced gas production in Russia, the Government of the Russian Federation should step up measures of comprehensive support for oil and gas enterprises, as the latter are budget-forming ones.

It’s Possible That Salt Clogging Is Lowering Your Gas Production

Salt buildup around producing wells is known for causing drastic drops in gas production. “Salt precipitation in gas wells (can) cause clogging, and severe production declines that may happen in days,” said Cíntia Gonçalves Machado, a scientist at TNO, which supports operators working in the waters off the Netherlands where salt blockages are a significant issue for producers. She recently presented a paper at the SPE Reservoir Simulation Conference on a new application that cuts the time and cost required to analyze the impact of salt on production and evaluate treatment plans (SPE 212257). The goal for TNO and its partner, Equinor, was to create an open-source simulator built on to a familiar engineering tool allowing “engineers to study how salt precipitation may affect production with a tool that is relatively cheap computationally, and also easy to use and visualize,” Machado wrote in an email. Specifically, the team that developed it started with a black-oil model in the open-source OPM Flow simulator and added elements that simulate salt precipitation, which happens as rapidly evaporating gas pulls water molecules out of salty brine, and estimate the effect on permeability. Other programs can do all that. What makes this one different is that it can run on an engineer’s laptop and can run a simulation in minutes to hours, while previous models require high-powered computer systems running for hours to days, Machado said. The early users are likely to be the small cadre of experts working on the extreme cases where salt buildup happens so rapidly that regular injections of fresh water are needed to dissolve the blockages. But Equinor also wanted a tool to help it identify wells where salt blockages are having a slower-building impact that is not obvious. “They see wells with a reduction in gas production and want to have some tool to understand and predict it,” said Paul Egberts, a staff mathematician at TNO who applied his years of salt-modeling experience to this project. The team also included Odd Steve Hustad, a reservoir technology specialist at Equinor who advised on how to accurately incorporate the physical properties of the brine into the black‑oil model. The paper described their work: “The black-oil transport equations are extended to allow the gas to contain vaporized water in addition to vaporized oil. The salt-transport equation is modified to account for a solid salt precipitate. The permeability reduction is dealt with through a mobility multiplier depending on the porosity change.” Salt precipitation is a possible source of trouble in wells where the pressure drops sharply to a low level near the wellbore. That triggers rapid gas evaporation, which pulls water droplets out of the brine. In wells with high water saturation and salinity, if the evaporation rate is high enough, it can reduce the liquid to below the level needed to dissolve salt, leading to the formation of salt crystals that clog the flow paths for gas. Egberts added that the actual production impact will depend on the vagaries of the reservoir.

Evaluation of Essential Oils as Additives during Fermentation of Feed Products: A Meta-Analysis

Essential oils (EOs) are secondary metabolites of plants with antimicrobial functions that can be used as silage additives, but their effectiveness has been inconsistent. Therefore, this study aimed to evaluate the effects of EOs as silage additives on nutritional quality, fermentative products, microbial population, and in vitro rumen fermentation. A total of 17 articles consisting of 113 studies (comparisons) were selected for meta-analysis. The results showed that EO supplementation increased several parameters of nutrient contents such as dry matter (DM), crude protein (CP), and ether extract (EE) (p < 0.05), but decreased crude fiber content and mold population (p < 0.05). EO supplementation also affected rumen fermentability, namely reduced gas production, organic matter digestibility, and some fermentation products such as total VFA, iso-butyrate, iso-valerate, acetic, and succinic acid (p < 0.05) but did not affect methane production. Sub-group analysis based on the source of EOs revealed that only cumin and oregano reduced mold population during ensiling (p < 0.05). These results showed that EO supplementation improved several nutrient qualities such as DM, CP, and EE, inhibiting mold growth and stabilizing rumen pH.

In Vitro Evaluation of Probiotic Properties of Two Novel Probiotic Mixtures, ConstiBiome and Sensi-Biome.

Changes in the gut microbiome cause recolonization by pathogens and inflammatory responses, leading to the development of intestinal disorders. Probiotics administration has been proposed for many years to reverse the intestinal dysbiosis and to enhance intestinal health. This study aimed to evaluate the inhibitory effects of two newly designed probiotic mixtures, Consti-Biome and SensiBiome, on two enteric pathogens Staphylococcus aureus and Escherichia coli that may cause intestinal disorders. Additionally, the study was designed to evaluate whether Consti-Biome and Sensi-Biome could modulate the immune response, produce short-chain fatty acids (SCFAs), and reduce gas production. Consti-Biome and Sensi-Biome showed superior adhesion ratios to HT-29 cells and competitively suppressed pathogen adhesion. Moreover, the probiotic mixtures decreased the levels of pro-inflammatory cytokines, such as tumor necrosis factor-α, interleukin (IL)-6 and IL1β. Cell-free supernatants (CFSs) were used to investigate the inhibitory effects of metabolites on growth and biofilms of pathogens. Consti-Biome and Sensi-Biome CFSs exhibited antimicrobial and anti-biofilm activity, where microscopic analysis confirmed an increase in the number of dead cells and the structural disruption of pathogens. Gas chromatographic analysis of the CFSs revealed their ability to produce SCFAs, including acetic, propionic, and butyric acid. SCFA secretion by probiotics may demonstrate their potential activities against pathogens and gut inflammation. In terms of intestinal symptoms regarding abdominal bloating and discomfort, Consti-Biome and Sensi-Biome also inhibited gas production. Thus, these two probiotic mixtures have great potential to be developed as dietary supplements to alleviate the intestinal disorders.

Assessing the toxicity of contaminated soils via direct contact using a gas production bioassay of thiosulfate utilizing denitrifying bacteria (TUDB)

A direct contact bioassay of thiosulfate utilizing denitrifying bacteria (TUDB) based on inhibition of gas production was deployed to assess the toxicity of naturally contaminated field soils and soils artificially contaminated with heavy metals. Test procedure producing optimal conditions responsible for maximum gas production was 0.5 mL test culture, 1 g soil sample, 80 RPM, and 48 h reaction time. Similarly, the concentrations which generated a 50% reduction in gas production by TUDB for the tested heavy metals were 3.01 mg/kg Cr6+; 15.30 mg/kg Ni2+;15.50 mg/kg Cu2+;16.60 mg/kg Ag+; 20.60 mg/kg As3+; 32.80 mg/kg Hg2+; 54.70 mg/kg Cd2+; and 74.0 mg/kg Pb2+. Because soil toxicity is usually influenced by various physicochemical characteristics, ten reference soils were used to determine the toxicity threshold for evaluating the toxicity of naturally contaminated field soils. All eight contaminated soils were toxic to the TUDB bioassay because their levels of inhibition ranged between 72% and 100% and exceeded the determined toxicity threshold of 10%. Compared to other direct contact assays, the newly developed assay TUDB proved to be very robust, producing highly sensitive data while the different soil physicochemical properties exerted minimal influence on the gas production activity of TUDB. Additionally, the simplicity of the developed methodology coupled with the elimination of pretreatment procedures such as elutriation, and ability to perform generate sensitive data in turbid and highly colored samples makes it, cost-effective, and easily adaptable for the assessment of heavy metal and field contaminated soils when compared with other conventional assays which require sophisticated instrumentation and prolonged testing procedures and times.

Complex inhibitions on anaerobic degradation of monosodium glutamate in wastewater under low COD/sulfate ratios

To investigate the complex inhibitions leading to the deterioration of reactor performance in anaerobic treatment of monosodium glutamate (MSG) wastewater under low COD/sulfate ratios, a comprehensive assessment of the overall reactor performance, sludge characteristics and microbial community characteristics was conducted in this study. The COD removal rate of the reactor was maintained above 90% throughout the experiment, but the gas yield decreased by 52% due to the complex competition between sulfate-reducing bacteria (SRB) and methane-producing archaea (MPA) resulting in a decreasing number of MPA. The sludge characteristics and microbial community features indicated that the complex competition between SRB and MPA included competition for hydrogen and survival space in the reactor. In addition, the competitive advantage of SRB for electrons led to the production of more sulfides in the reactor, further inhibiting the activity of MPA. Therefore, the complex inhibition within the reactor for anaerobic treatment of MSG wastewater with low COD/sulfate ratios, including sulfide toxicity inhibition, competition between SRB and MPA for substrate and space, not only led to a reduction in gas production, but also affected microbial activity and glutamate degradation.

Methane hydrate re-formation and blockage mechanism in a pore-level water-gas flow process

Hydrate re-formation increases blockage risk and further reduces gas production efficiency. Considering the huge water production and gas migration, it is essential to determine the key parameters that control hydrate re-formation and blockage in the two-phase flow process. However, little research reveals the mechanism of hydrate re-formation in the water-dominated two-phase flow system. In this study, two-phase flow in hydrate sediment is simulated by controlling the water-gas flow rate, and the effect of effective sectional velocity on hydrate re-formation characteristics is analyzed. The experimental results showed that temperature and pressure followed a three-stage change trend in the water-dominated two-phase flow process: including hydrate re-formation induction stage I, mass hydrate re-formation and agglomeration stage II, and pore gas consumption stage III. Moreover, a lower effective sectional velocity of water (WESV) would reduce the gas concentration gradient between water and hydrate to enhance the hydrate re-formation process. Meanwhile, the gas phase impeded the mass transfer on the water-hydrate interface and acted as the nucleation site to promote hydrate re-formation. Furthermore, it was noticed that the relationship between the onset time of flow blockage and WESV was linearly positive, however, the amount of hydrate re-formation reduced with increasing WESV.

Simulation research on solid fluidization exploitation of deepwater superficial layer natural gas hydrate reservoirs based on double-layer continuous pipe

In this paper, a new method for exploiting shallow marine natural hydrate reservoirs is proposed using a double-layer continuous pipe. In order to research the multiphase flow behavior and hydrate decomposition characteristics during the hydrate mining process, a non-isothermal transient gas-liquid-solid multiphase flow model is established considering the coupling effect of multiphase flow, heat transfer and hydrate phase transition. The model's accuracy is verified by comparisons with laboratory and field data. Numerical simulation results show that the hydrate decomposition is slow in the first 2 h of mining, thus the volume fraction of each phase in the pipe changes little; with the increase of time, the volume fraction of each phase in the pipe changes significantly until it reaches a stable state after about 5 h of mining. When the mining rate exceeds 15 kg/s, the hydrate particles will not be fully and effectively transported, and a short time aggregation phenomenon will occur. Increasing the temperature of the injected seawater is beneficial to promote the hydrate decomposition, which in turn increases gas production. While, increasing the wellhead backpressure and seawater displacement facilitates in reducing gas production. The research findings will be of reference value for gaining insight into studying complex multiphase flow behaviors involving hydrate phase transition and provide a new approach to exploiting subsea shallow natural gas hydrate reservoirs.

The Influence of Fracturing Fluid Volume on the Productivity of Coalbed Methane Wells in the Southern Qinshui Basin

Hydraulic fracturing is the main technical means for the reservoir stimulation of coalbed methane (CBM) vertical wells. The design of fracturing fluid volume (FFV) is mainly through numerical simulation, and the numerical simulation method does not fully consider the water block damage caused by the leakage of fracturing fluid into the reservoir. In this work, the variance analysis method was used to analyze the production data of 1238 CBM vertical wells in the Fanzhuang block and Zhengzhuang block of the Qinshui Basin, to clarify the relationship between the FFV and the peak gas production (PGP) under the different ratios of critical desorption pressure to reservoir pressure (Rc/r), and to reveal the controlling mechanism of fracturing fluid on CBM migration. The results show that both the FFV and Rc/r have a significant impact on gas production. When Rc/r < 0.5, the PGP decreases with the increase of the FFV, and the FFV that is beneficial to gas production is 200–500 m3. When Rc/r > 0.5, the PGP increases first and then decreases with the increase of FFV. Specifically, the FFV that is favorable for gas production is 500–700 m3. Excessive FFV does not significantly increase the length of fractures due to leaks in the coal reservoir. Instead, it is more likely to invade and stay in smaller pores, causing water block damage and reducing gas production. Reservoirs with high Rc/r have larger displacement pressure, which can effectively overcome the resistance of liquid migration in pores, thereby reducing the damage of the water block. Therefore, different reservoir conditions need to match the appropriate fracturing scale. This study can provide guidance for the optimal design of hydraulic fracturing parameters for CBM wells.

Potential health benefits of lowering gas production and bifidogenic effect of the blends of polydextrose with inulin in a human gut model.

Polydextrose is a nutrient supplement, which is widely applied in the food industry. The use of polydextrose in combination with prebiotics and probiotics has recently increased, whereas the fermentation properties of its blend have not yet been fully revealed. We evaluated the metabolic profile of polydextrose, inulin, and their blends by a batch in vitro fermentation of fifteen human fecal inocula. After 24 h of fermentation, polydextrose increased the production of gas, ammonia, and several short chain fatty acids, including propionate and butyrate, when compared to its blends, inulin, and fructo-oligosaccharides. Furthermore, polydextrose had the slowest degradation rate of all the carbohydrates tested, consistent with its partial fermentation in the distal colon. The 16S rRNA gene sequencing analysis of the gut microbiome exhibited significantly increased relative abundance of Clostridium_XVIII, Megamonas, Mitsuokella, and Erysipelotrichaceae_incertae_sedis in polydextrose compared to other carbohydrates. On the other hand, the blends of polydextrose and inulin (1:1 or 2:1) showed reduced gas production and similar bifidogenicity to inulin alone. The blends not only had similar alpha-diversity and PCoA to inulin but also had a similar abundance of beneficial bacteria, such as Faecalibacterium and Roseburia, suggesting potential health benefits. Also their low gas production was likely due to the abundance of Faecalibacterium and Anaerostipes, which were negatively correlated with gas production. Additionally, our in vitro fermentation model shows advantages in the large-scale assessment of fermentation performance.

Linking metabolites in eight bioactive forage species to their in vitro methane reduction potential across several cultivars and harvests

An in vitro Hohenheim gas test was conducted to analyze the fermentation end-products from 17 cultivars of eight polyphenol containing forage species. The polyphenol composition and proanthocyanidin (PA) structural features of all the cultivars were analyzed with UPLC-MS/MS in leaves of vegetative or generative plants. The samples were incubated with and without polyethylene glycol (PEG, a tannin-binding agent) to separate the tannin-effect on methane (CH4, ml/200 mg DM) production from that of forage quality. Sulla and big trefoil, two particularly PA rich species, were found to have the highest CH4 reduction potential of up to 47% when compared to the samples without PEG. However, concomitant reduction in gas production (GP, ml/200 mg DM) of up to 44% was also observed. An increase in both GP and CH4 production under PEG treatments, confirms the role of tannins in CH4 reduction. Moreover, PA structural features and concentration were found to be an important source of variation for CH4 production from PA containing species. Despite having low polyphenol concentrations, chicory and plantain were found to reduce CH4 production without reducing GP. Additionally, interspecies variability was found to be higher than intraspecies variability, and these results were consistent across growth stages, indicating the findings’ representativeness.

Synthesis of a Superhydrophobic Fluorinated Nano-Emulsion and Its Modification on the Wettability of Tight Sandstone.

The water-blocking effect is a serious problem when developing tight sandstone gas reservoirs, which can cause a sharp reduction in gas production. Wettability alteration of near-wellbore sand rock surface from superhydrophilicity to superhydrophobicity is an effective method to decrease capillary pressure. In this study, a superhydrophobic fluorinated nano-emulsion was synthesized via a soap-free emulsion polymerization process using methacryloxyethyl trimethyl ammonium chloride, trifluoctyl methacrylate, and styrene as monomers. The effect of the fluorinated monomer concentration on wettability alteration was evaluated by measuring the contact angle of the formation water droplet on the modified glass slides using nano-emulsions with different fluorinated monomer concentrations. The results showed that the nano-emulsion had a good dispersibility and homogeneous particle size of around 90 nm, and with the increase in fluorinated monomer concentration, the contact angle increased. The contact angle was the largest when the fluorinated monomer mass rate concentration reached 50%. The adsorption of nanoparticles could alter the rock wettability from a super hydrophilic state (θ = 7°) to a superhydrophobic state (θ = 150°). The spontaneous imbibition experiments showed that the formation water adsorption quality of the core decreased by 49.7% after being modified by the nano-emulsion. The nano-emulsion showed a good superhydrophobicity and had the potential to be used to reduce the water-blocking damage in the tight gas reservoirs.

Effects of Different Feeding Methods on the Structure, Metabolism, and Gas Production of Infant and Toddler Intestinal Flora and Their Mechanisms.

In this study, we evaluated the effects of different feeding methods on the characteristics of intestinal flora and gas production in infants and toddlers by using an in vitro simulated intestinal microecology fermentation and organoid model. We found that the feeding method influences intestinal gas and fecal ammonia production in infants and toddlers. Supplementation with milk powder for infants in the late lactation period could promote the proliferation of beneficial bacteria, including Bifidobacteria. Intestinal flora gas production in a culture medium supplemented with fucosyllactose (2′-FL) was significantly lower than that in media containing other carbon sources. In conclusion, 2′-FL may reduce gas production in infant and toddler guts through two mechanisms: first, it cannot be used by harmful intestinal bacteria to produce gas; second, it can inhibit intestinal mucosa colonization by harmful bacteria by regulating the expression of intestinal epithelial pathogenic genes/signaling pathways, thus reducing the proliferation of gas-producing harmful bacteria in the gut.

Upgrading of polyethylene to hydrocarbon fuels over the Fe-modified Pt/Al2O3 catalysts at a mild condition without external H2

Upcycling of waste plastic is an emerging topic in environmental chemical and process engineering. In this work, we investigated the pyrolysis of polyethylene (PE) over Fe-modified Pt/Al2O3 catalysts in the absence of external H2 to produce hydrocarbon fuels at a mild condition (330℃). The critical interest is to achieve the mild conversion of PE by using the bimetallic catalyst to generate in-situ H instead of external H2 for hydrogenolysis. Results show that a slight impregnation of Fe on Pt/Al2O3 (Fe/Pt = 0.25) can improve the oil yield and light oil selectivity as well as promote the formation of aromatics and alkenes in oil after PE pyrolysis in a batch reactor. Multiple active sites including Pt, Fe and Lewis acid site of Al2O3 work systematically to drive the tandem catalysis without H2. The Pt plays the major role in PE pyrolysis via hydrogenolysis assisted by in-situ generated H, but shows the mutual inhibition with the acid site of Al2O3 that is contributive to PE cracking via a traditional carbocation chemistry. Fe modification on Pt/Al2O3 plays multiple roles in catalysis: promotes cyclization reaction, benefits the hydrogenolysis activity of Pt by providing active H during aromatic formation, and decreases catalyst acidity to reduce gas production. However, an over-impregnation of Fe (Fe/Pt = 1) partially covers the Pt sites, resulting in the decrease of fuel oil production but an increase in residue yield due to the deactivation of Pt sites. The post-reaction catalyst can be almost completely regenerated after combustion and reduction.

In Vitro Rumen Methanogenesis Of Lemon Grass (Cymbopogon Nardus L.) Waste Silage

Utilization of agroindustrial waste as feed for ruminant should consider not only biomass availability but also the impact to environment. Methanogenesis has been one of the issues regarding to the utilization of agroindustrial was as feed for ruminant. Lemon grass (Cymbopogon nardus L.) has known for its potential as feed for ruminant, however the information on its methanogenesis activities is very few. Ensiling process of the lemon grass waste may enhance the potential. Lemon grass waste were divided into two group of in vitro digestibility experiment; control (T0) and ensilage (T1) lemon grass waste. Observed parameters were pH, total gas production (mL) and rumen methane concentration (ppm). The Data were applied to T-tes student with 10 replications. The results showed that the pH was not significantly different (p> 0.05), while gas production and rumen methane concentration was significantly different (p <0.05). It can be concluded that the use of lemon grass waste silage can maintain the stability of pH values, reduce gas production, and methane gas concentration in cattle.

Management of bloating.

Abdominal bloating is a subjective sensation of trapped abdominal gas, producing abdominal pressure, fullness sensation, and, in some patients, associated objective abdominal distension. In this month's edition of the journal, a new validated questionnaire to assess the prevalence and impact of gas-related symptoms is presented by Duracinsky et al., showing that gas-related abdominal symptoms are prevalent in patients with irritable bowel syndrome and have a measurable impact on patients daily life. A parallel study by Gardiner et al. assessing the severity of bloating in functional gastrointestinal disorders shows that severe bloating is associated with the severity of abdominal pain, constipation, and somatization, advancing our understanding of the clinical characteristics and relevance of gas-related symptoms in the broad spectrum of functional gastrointestinal disorders. Management of bloating includes non-pharmacological and pharmacological strategies. Dietary interventions to reduce intestinal fermentation and ingestion of food supplements like prebiotics or probiotics can reduce bloating by reducing gas production. The main targets of pharmacological treatments are to improve transit and evacuation with prokinetics, to improve intestinal gas tolerance with antispasmodics and/or neuromodulators, and to modify intestinal microbiota with antibiotics. Secretagogues act by increasing intestinal secretion and decreasing visceral sensitivity and have been reported to be an effective treatment alternative for patients with bloating associated with constipation. Biofeedback therapy addressed to correct abdomino-phrenic dysynergia may be useful for patients with objective abdominal distension, and patients with bloating associated with outlet obstructed defecation may benefit from anorectal biofeedback.

Successful Gas Shutoff Operation Using a Coiled Tubing Telemetry System: A Case History

Summary In a deviated well in the Caspian Sea, the gas/oil ratio (GOR) increased rapidly in 2017. The result was an oil rate decline with several choke backs to manage GOR buildup. After performing two production-logging jobs, it was confirmed that 76% of the gas production was coming from four upper perforations. The main objective was to perform a gas shutoff (GSO) treatment in two stages to reduce gas production by squeezing polymer into the formation and setting packers at a 59° deviation inside a 9⅝-in. casing for temporary isolation of the middle and lower production sands. Fifteen runs were performed with a tube wire-enabled coiled tubing (CT) telemetry (CTT) system that consists of a customized bottomhole assembly (BHA) that instantaneously transmits differential pressure (DP), temperature, and depth data to the surface through a nonintrusive tube wire installed inside the CT. For the first time in the region, a tension, compression, and torque (TCT) subassembly was deployed to control the entire setting/retrieval process with accurate downhole upward/downward forces. CTT technology was a key element to successfully set two through-tubing inflatable retrievable packers (TTIRPs) by performing casing collar locator correlations at the tubing end, which was 133 and 228 m [measured depth (MD)] shallower from the setting depths. In addition, during the second GSO operation, the GSO gel system crosslink time was modified on the basis of the actual bottomhole temperature (BHT) recorded with the CTT system. Finally, during the third GSO operation, treatment placement was improved, spotting more GSO gel system inside the casing section and avoiding further treatments. After successful placement of the GSO gel system, a drop from 15.5 to 4.5 MMscf/D in gas production was observed (GOR reduction from 11,000 to 750 MMscf/bbl) with an oil rate increment from 1.4 to 6.04 Mbbl/D. Furthermore, after the gas reduction, the operator was able to produce between 1.5 and 2.0 Mbbl/D from other wells that were choked back on the basis of gas handling capabilities limitations. In the short term, GOR reduction sustained at 3,000 MMscf/bbl and 3.0 Mbb/D oil rate. The novelty of using the CTT system and TCT subassembly for real-time monitoring of BHA data proved to be beneficial for positioning two TTIRP, modifying GSO gel system design, placing it precisely across target intervals, and retrieving two TTIRPs that in the end provided direct and positive financial impact for the operator.

Effect of Supplying Rosemary (Rosmarinus officinalis L.) and Garlic (Allium sativum L.) Essential Oils to Feedlot Lambs on in vitro Ruminal Fermentation

The aim of this trial was to evaluate the ruminal degradation kinetics of carbohydrates in diets with different roughage:concentrate ratios and dosages of garlic and rosemary essential oils, in order to find the most suitable dosage to supply feedlot lambs. Three roughage:concentrate ratios (50:50, 40:60, and 20:80) and six dosages of garlic and rosemary essential oils (0.0, 0.10, 0.25, 1.0, 1.50, and 2.0 g L−1) were tested. Kinetic parameters for carbohydrate breakdown were estimated using a semi-automated in vitro gas production technique. Ruminal degradation parameters were subjected to variance analysis and then regression analysis at a 5% significance level. There was no interaction between the roughage:concentrate ratios and the dosage of rosemary essential oil. The roughage:concentrate ratios in diets with rosemary oil affected the non-fiber carbohydrate degradation rate (Kdnfc), colonization time (L), gas volume and breakdown rate from the degradation of fiber carbohydrates (Vfc and Kdfc, respectively), and final gas volume of both fiber and non-fiber carbohydrates (Vfinal). Rosemary dosages affected Vnfc and Vfc, which presented a quadratic response with a peak at 0.71 g L−1 and a nip at 1.17 g L−1, respectively. Bacterial colonization time was quadratic, reaching a maximum value at 1.18 g L−1. Vfinal showed a decreasing linear trend, such that each gram of rosemary essential oil added to the diet could reduce gas production by 30.312 mL. Therefore, rosemary essential oil has an effect on carbohydrate degradation kinetics. There was no interaction between roughage:concentrate ratios and different garlic oil dosages, except for colonization time. Roughage:concentrate ratios with garlic oil had affected the Vnfc, Kdnfc, and L. Garlic oil dosages affected Vfc and Vfinal in a quadratic manner, with the lowest values of gas production at 1.35 and 1.54 g L−1, respectively. L was affected by the garlic oil dosage and roughage:concentrate ratios in a decreasing linear trend for a 50:50 ratio and quadratic response for a 40:60 ratio, peaking at 0.14 g L−1. Based on these in vitro results, a ruminal content of 1.0 g L−1 is recommended for both rosemary and garlic essential oils.