Cotton Quality Research Articles

Effect of varying planting density on weed infestation, crop phenology, yield, and fiber quality of cotton under different sowing methods

Effect of varying planting density on weed infestation, crop phenology, yield, and fiber quality of cotton under different sowing methods

Effect of varying planting density on weed infestation, crop phenology, yield, and fiber quality of cotton under different sowing methods

Effect of varying planting density on weed infestation, crop phenology, yield, and fiber quality of cotton under different sowing methods

GhTBL34 Is Associated with Verticillium Wilt Resistance in Cotton.

Verticillium wilt (VW) is a typical fungal disease affecting the yield and quality of cotton. The Trichome Birefringence-Like protein (TBL) is an acetyltransferase involved in the acetylation process of cell wall polysaccharides. Up to now, there are no reports on whether the TBL gene is related to disease resistance in cotton. In this study, we cloned a cotton TBL34 gene located in the confidence interval of a major VW resistance quantitative trait loci and demonstrated its relationship with VW resistance in cotton. Analyzing the sequence variations in resistant and susceptible accessions detected two elite alleles GhTBL34-2 and GhTBL34-3, mainly presented in resistant cotton lines whose disease index was significantly lower than that of susceptible lines carrying the allele GhTBL34-1. Comparing the TBL34 protein sequences showed that two amino acid differences in the TBL (PMR5N) domain changed the susceptible allele GhTBL34-1 into the resistant allele GhTBL34-2 (GhTBL34-3). Expression analysis showed that the TBL34 was obviously up-regulated by infection of Verticillium dahliae and exogenous treatment of ethylene (ET), and salicylic acid (SA) and jasmonate (JA) in cotton. VIGS experiments demonstrated that silencing of TBL34 reduced VW resistance in cotton. We deduced that the TBL34 gene mediating acetylation of cell wall polysaccharides might be involved in the regulation of resistance to VW in cotton.

Effects of drip tape modes on soil hydrothermal conditions and cotton yield (Gossypium hirsutum L.) under machine-harvest patterns.

BackgroundThe layout of drip tapes under mulch has changed in Xinjiang, China, with the development of machine-harvest cotton (Gossypium hirsutum L.) planting technology. This study aims to demonstrate the effects of drip tape modes on soil hydrothermal conditions, cotton yield, and water use efficiency (WUE) of machine-harvest cotton under mulch in Xinjiang.MethodsA field experiment was conducted to set up two machine-harvest cotton planting patterns (T1: the cotton planting model with one film, two drip tapes and six rows; T2: the cotton planting model with one film, three drip tapes and six rows), and a conventional planting mode (T3: the cotton planting model with one film, two drip tapes and four rows) as a control.ResultsOur results showed that the heat preservation and warming effects of the cotton planting model with one film, two drip tapes and six rows and the cotton planting model with one film, three drip tapes and six rows were better than that of the conventional planting mode. Soil temperature under the mulching film quickly increased and slowly decreased, which was beneficial to the early growth and development of cotton. The mean soil moisture content of the 0–60 cm soil layer in the cotton planting model with one film, three drip tapes and six rows was significantly higher than the other two treatments at the middle and late stage of cotton growth (90 days after sowing (DAS) and 135 DAS). Moreover, the water holding capacity of the middle and upper part of the tillage layer in the cotton planting model with one film, three drip tapes and six rows was the best. At the medium cotton growth stage, the main root layer in the cotton planting model with one film, three drip tapes and six rows formed a desalination zone. At the late cotton growth stage, the soil salinity content of the 0–60 cm soil layer showed that the cotton planting model with one film, three drip tapes and six rows was the lowest, the cotton planting model with one film, two drip tapes and six rows was the highest, and the conventional planting pattern was in the middle. Among these three modes, the cotton planting model with one film, three drip tapes and six rows was more efficient in controlling soil salt accumulation. The agronomic traits and cotton quality in the cotton planting model with one film, three drip tapes and six rows were better than that for the other two treatments. Compared with the other treatments, the cotton yield in the cotton planting model with one film, three drip tapes and six rows increased by 6.15% and 11.0% and 8.1% and 12.3%, in 2017 and 2018, respectively, and WUE increased by 17.4% and 22.7% and 20.9% and 22.8%, in 2017 and 2018 respectively. In conclusion, the cotton planting model with one film, three drip tapes and six rows can be recommended for machine-harvest cotton planting for arid areas in Xinjiang, considering water conservation and improving cotton yield.

Function analysis of a cotton R2R3 MYB transcription factor GhMYB3 in regulating plant trichome development.

Cotton is an important fibre-producing crop. Cotton fibres consist of highly elongated trichomes derived from the ovule. To improve the quality of cotton, it is necessary to identify the genes regulating fibre development. GhMYB3 was identified through bioinfomatic analysis and introduced to Arabidopsis and cotton to observe the phenotype. Protein inteaction and promoter bingding assays were conducted to explore the role of GhMYB3 in trichome fibre growth. Cotton fibre development might share a similar regulatory mechanism to Arabidopsis leaf trichomes, which is determined by the essential regulatory complex, MYB-bHLH-WD40. The GL1-like R2R3 MYB transcription factor GhMYB3 interacts with the AtGL3 protein involved in Arabidopsis trichome development. Ectopic expression of GhMYB3 could rescue the glabrous phenotype of the Arabidopsis gl1 mutant and produced more ectopic trichomes on inflorescence stems and floral organs, confirming its orthologous function in plant trichome development. The expression of GhMYB3 increased in response to exogenous gibberellin (GA3 ), auxin (IAA) and methyl jasmonate (MeJA). Overexpression of this gene in cotton leads to a slight increase in fibre length and lint percentage, possibly by activating the transcription of its downstream gene GhRDL1 or other fibre-related genes. The results increase our understanding of the key role of GhMYB3 in positively controlling plant trichome development, and this gene could be a potential target for molecular breeding in cotton.

Favorable pleiotropic loci for fiber yield and quality in upland cotton (Gossypium hirsutum)

Upland cotton (Gossypium hirsutum L.) is an important economic crop for renewable textile fibers. However, the simultaneous improvement of yield and fiber quality in cotton is difficult as the linkage drag. Compared with breaking the linkage drag, identification of the favorable pleiotropic loci on the genome level by genome-wide association study (GWAS) provides a new way to improve the yield and fiber quality simultaneously. In our study restriction-site-associated DNA sequencing (RAD-seq) was used to genotype 316 cotton accessions. Eight major traits in three categories including yield, fiber quality and maturation were investigated in nine environments (3 sites × 3 years). 231 SNPs associated with these eight traits (− log10(P) > 5.27) were identified, located in 27 genomic regions respectively by linkage disequilibrium analysis. Further analysis showed that four genomic regions (the region 1, 6, 8 and 23) held favorable pleiotropic loci and 6 candidate genes were identified. Through genotyping, 14 elite accessions carrying the favorable loci on four pleiotropic regions were identified. These favorable pleiotropic loci and elite genotypes identified in this study will be utilized to improve the yield and fiber quality simultaneously in future cotton breeding.

Genome-Wide Association Analysis Reveals Loci and Candidate Genes Involved in Fiber Quality Traits Under Multiple Field Environments in Cotton (Gossypium hirsutum).

Fiber length, fiber strength, and fiber micronaire are the main fiber quality parameters in cotton. Thus, mining the elite and stable loci/alleles related to fiber quality traits and elucidating the relationship between the two may accelerate genetic improvement of fiber quality in cotton. Here, genome-wide association analysis (GWAS) was performed for fiber quality parameters based on phenotypic data, and 56,010 high-quality single nucleotide polymorphisms (SNPs) using 242 upland cotton accessions under 12 field environments were obtained. Phenotypic analysis exhibited that fiber length (FL) had a positive correlation with fiber strength (FS) and had a negative correlation with fiber micronaire (Mic). Genetic analysis also indicated that FL, FS, and Mic had high heritability of more than 80%. A total of 67 stable quantitative trait loci (QTLs) were identified through GWAS analysis, including 31 for FL, 21 for FS, and 22 for Mic. Of them, three pairs homologous QTLs were detected between A and D subgenomes, and seven co-located QTLs with two fiber quality parameters were found. Compared with the reported QTLs, 34 co-located with previous studies, and 33 were newly revealed. Integrated with transcriptome analysis, we selected 256, 244, and 149 candidate genes for FL, FS, and Mic, respectively. Gene Ontology (GO) analysis showed that most of the genes located in QTLs interval of the three fiber quality traits were involved in sugar biosynthesis, sugar metabolism, microtubule, and cytoskeleton organization, which played crucial roles in fiber development. Through correlation analysis between haplotypes and phenotypes, three genes (GH_A05G1494, GH_D11G3097, and GH_A05G1082) predominately expressed in fiber development stages were indicated to be potentially responsible for FL, FS, and Mic, respectively. The GH_A05G1494 encoded a protein containing SGS-domain, which is related to tubulin-binding and ubiquitin-protein ligase binding. The GH_D11G3097 encoded 20S proteasome beta subunit G1, and was involved in the ubiquitin-dependent protein catabolic process. The GH_A05G1082 encoded RAN binding protein 1 with a molecular function of GTPase activator activity. These results provide new insights and candidate loci/genes for the improvement of fiber quality in cotton.

Effect of Foliar Spraying with Compounds Rich in Potassium and Phosphorus as an Alternative to Soil Addition on the Growth, Productivity and Quality of Cotton

This study was conducted during two successive seasons (2019 and 2020) on cotton cultivar Giza 86 at El-Gemmeiza Agricultural Research Station, El-Gharbia Governorate, Egypt, to study the effect of foliar feeding withtwo compounds enriched with phosphorus and potassium [Agrophytex at two levels (2 and 4 cm3 /L) and potassium phosphate at two levels (2 and 4 g /L)] either alone or in combination at the low and high level compared to the control treatment (sprayed with tap water and fertilized with phosphorus and potassium at the recommended rates as soil application) on cotton productivity and quality. A randomized complete blocks design with 4 replicates was used. The obtained results revealed that foliar feeding with Agrophytexand potassium phosphate combination at the two levels examined significantly increased percentages of N, P, K and contents of chloroplast pigments in cotton leaves in 2019 season. Growth parameters, earliness measurements, seed cotton yield/feddan and its components in both seasons as well as micronaire reading and fiber strength in the second season were also increased. Whereas, boll shedding percentage decreased. Fiber length and uniformity index did not affected. It could be concluded that using combination of Agrophytexand potassium phosphate at the low level (2 cm3 Agrophytex+ 2 g potassium phosphate)/L four times (at seedling stage, squaring initiation, flowering start and peak of flowering stage) as alternative to soil P and K fertilization was recommended to reduce cost, overcome P and K fixation and obtain high productivity under conditions similar to El-Gemmeiza region.

Changes in secondary metabolites and fiber quality of cotton (Gossypium hirsutum) seed under consecutive water stress and in silico analysis of cellulose synthase and xyloglucan endotransglucosylase.

Global warming has led to severe drought conditions. The selection of plant varieties that can withstand drought and produce increased yields are of utmost importance. In the current study, secondary metabolites, seed trait and fiber characteristic of cottonseeds (Gossypium hirsutum) exposed to double and third water stress exposure was investigated. Total phenol and tannin content in W1S33 increased significantly after third water stress exposure. Accumulation of wax was enhanced in seeds of W3S33 and W3S34 that were subjected to third water stress. Fiber quality parameters decreased when cottonseeds were rainfed. High irrigation resulted in fragile and delicate fiber. Seeds grown under 66% FC irrigation saved water and produced seeds that had the potential of producing high quality fibers. In silico analysis was performed on cellulose synthase A (CesA) and xyloglucan endotransglycosylase (XET) enzymes present in Gossypium hirsutum. The intracellular locations of the CesA and XET1 enzymes are the plasma membrane and cell wall, respectively. Proline is conserved in the C-terminal of the CesA enzyme and plays an important role in enzyme functionality. This study provides a better understanding as to the mechanisms by which the plant can tolerate and combat water stress conditions as well as reduce water consumption. In order to grow cotton seeds with desirable morphometric characteristics and optimal fibers under water stress exposure and in dry areas, it is better to use seeds that are irrigated under optimal irrigation conditions, ie 66% FC.

Assessing the potential of partial root zone drying and mulching for improving the productivity of cotton under arid climate

Water scarcity constrains global cotton production. However, partial root-zone drying (PRD) and mulching can be used as good techniques to save water and enhance crop production, especially in arid regions. This study aimed to evaluate the effects of mulching for water conservation in an arid environment under PRD and to further assess the osmotic adjustment and enzymatic activities for sustainable cotton production. The study was carried out for 2 years in field conditions using mulches (NM = no mulch, BPM = black plastic mulch at 32 kg ha-1, WSM = wheat straw mulch at 3 tons ha-1, CSM = cotton sticks mulch at 10 tons ha-1) and two irrigation levels (FI = full irrigation and PRD (50% less water than FI). High seed cotton yield (SCY) achieved in FI+WSM (4457 and 4248 kg ha-1 in 2017 and 2018, respectively) and even in PRD+WSM followed by BPM>CSM>NM under FI and PRD for both years. The higher SCY and traits observed in FI+WSM and PRD+WSM compared with the others were attributed to the improved water use efficiency and gaseous exchange traits, increased hormone production (ABA), osmolyte accumulation, and enhanced antioxidants to scavenge the excess reactive oxygen. Furthermore, better cotton quality traits were also observed under WSM either with FI or PRD irrigation regimes. Mulches applications found effective to control the weeds in the order as BPM>WSM>CSM. In general, PRD can be used as an effective stratagem to save moisture along with WSM, which ultimately can improve cotton yield in the water-scarce regions under arid climatic regions. It may prove as a good adaptation strategy under current and future water shortage scenarios of climate change.

High‐density linkage map construction and QTL analysis of fiber quality and lint percentage in tetraploid cotton

AbstractImproving fiber quality and yield are major research objectives for cotton breeders in the United States. Identifying broadly existing and stable quantitative trait loci (QTLs) related to fiber quality is critical to properly utilizing genomic resources in cotton improvement programs. An F6 recombinant inbred line (RIL) population derived from the cross of NC05AZ21 × TX‐2324 was used to develop linkage maps and for QTL analysis of six fiber quality traits and lint percentage. The Illumina 63K single nucleotide polymorphism (SNP) array was used to genotype the RIL population. Analysis of variance of phenotypic trait data showed significant differences among lines and years for all traits tested. The heritability for tested traits ranged from 0.56 to 0.91. Genetic mapping was performed using 3,009 polymorphic SNP markers on the RILs. We constructed a genetic map with a total length of 4,983.73 cM and an average distance of 1.66 cM between markers. The linkage map corresponded well with the Upland cotton (Gossypium hirsutum L.) sequence‐based physical map. Thirty‐two QTLs with additive effects for lint percentage and fiber quality traits were identified on 15 chromosomes, explaining 7.9–22.2% of the phenotypic variance. The majority of these QTLs were mapped in the D subgenome, indicating that functional mutations in the D subgenome are responsible for the major fiber quality improvements in Upland cotton. Furthermore, five QTL clusters were located on four chromosomes (Chr.05, Chr.18, Chr.19, and Chr.26), which may explain the strong correlation between fiber quality traits measured. The QTLs identified in the current study could be targeted for marker‐assisted selection and map‐based cloning of fiber quality traits in Upland cotton.

Comparative study of transgenic and nontransgenic cotton

AbstractThe environmental impact of genetically modified crops has been extensively investigated. However, few reports on the influence of transgenic traits on genetic structure have been reported in the literature. It is unknown how or if transgenic cultivars have affected genotypic variation in upland cotton (Gossypium hirsutum L.) since its rise to dominance in cotton production. In this study, the genotypic variance components, g, of lint yield (LY) and fiber quality were compared among transgenic and nontransgenic cotton in the USDA Regional High Quality (RHQ) tests from 2002 through 2018. The popular transgenic and nontransgenic cultivars/lines developed by the major private and public cotton breeding programs in the United States during this period were included. Testing cycles within the RHQ protocol consist of standardized control cultivars plus experimental entries. Variance components were dissected in each testing year within six such testing cycles. Lint yield of the transgenic cotton was generally higher than nontransgenic cotton. Fiber quality of the nontransgenic cotton was generally higher than the transgenic cotton. For LY, the proportion of g to the total variance was lower in the transgenic cotton than in the nontransgenic cotton, but the difference diminished in the recent two cycles. The proportion of g was lower in the transgenic cotton compared with the nontransgenic cotton for fiber length, fiber strength, fiber uniformity, and micronaire. The discrepancy between the two types of cotton in the RHQ tests reflects the influences of differential breeding schemes in the private and public breeding programs on means and genotypic variance of LY and fiber quality.

Optimal irrigation amount and nitrogen rate improved seed cotton yield while maintaining fiber quality of drip-fertigated cotton in northwest China

Improving the quality of cotton fiber is an important way to increase the competitiveness of cotton in the international market. However, how to improve fiber quality as much as possible without significantly reducing seed cotton yield is still a challenge to the cotton industry. A two-year field experiment was conducted in 2018 and 2019 to investigate the effects of irrigation amount and nitrogen rate on seed cotton yield and fiber quality traits of drip-fertigated cotton in northwest China. A comprehensive evaluation model was also developed to determine the optimal supply range of water and nitrogen to simultaneously improve seed cotton yield and fiber quality. There were four irrigation amounts (W0.6-60 % ETc, W0.8-80 % ETc, W1.0-100 % ETc and W1.2-120 % ETc, ETc was the crop evapotranspiration) and four nitrogen rates (N250-250 kg N ha−1, N300-300 kg N ha−1, N350-350 kg N ha−1 and N400-400 kg N ha−1). Increasing irrigation amount and nitrogen rate had positive effects on seed cotton yield. However, there was no significant difference in seed cotton yield between W1.0 and W1.2 and between N350 and N400. The optimal seed cotton yield was obtained under W1.0N350 in both 2018 (6655.58 kg ha−1) and 2019 (6309.3 kg ha−1). Water use efficiency (WUE) increased with the increase of nitrogen rate, and decreased with the increasing irrigation amount. Nitrogen partial factor productivity (PFPN) increased with the increase of irrigation amount, and decreased with the increasing nitrogen rate. There was a positive correlation between irrigation amount and fiber length, fiber strength, fiber quality index (FQI) and textile parameter, but a negative correlation with micronaire and short-fiber index. Fiber length, fiber strength, FQI and textile parameter first increased and then decreased with the increasing nitrogen rate. Irrigation amount and nitrogen rate had no significant effect on maturity index. There were strong correlations between the results of various evaluation methods, but the ranking differed among the methods. Based on the comprehensive evaluation model, the optimal combination of irrigation amount and nitrogen rate was W1.0N350. Through the combination of multiple regression and spatial analysis, the optimal supply range of irrigation amount of 334∼450 mm and nitrogen rate of 320∼400 kg ha−1was able to obtain over 90 % of the optimal seed cotton yield and 80 % of the optimal fiber quality.

Effects of Interspecific Chromosome Substitution in Upland Cotton on Cottonseed Macronutrients.

Nutrients, including macronutrients such as Ca, P, K, and Mg, are essential for crop production and seed quality, and for human and animal nutrition and health. Macronutrient deficiencies in soil lead to poor crop nutritional qualities and a low level of macronutrients in cottonseed meal-based products, leading to malnutrition. Therefore, the discovery of novel germplasm with a high level of macronutrients or significant variability in the macronutrient content of crop seeds is critical. To our knowledge, there is no information available on the effects of chromosome or chromosome arm substitution on cottonseed macronutrient content. The objective of this study was to evaluate the effects of chromosome or chromosome arm substitution on the variability and content of the cottonseed macronutrients Ca, K, Mg, N, P, and S in chromosome substitution lines (CS). Nine chromosome substitution lines were grown in two-field experiments at two locations in 2013 in South Carolina, USA, and in 2014 in Mississippi, USA. The controls used were TM-1, the recurrent parent of the CS line, and the cultivar AM UA48. The results showed major variability in macronutrients among CS lines and between CS lines and controls. For example, in South Carolina, the mean values showed that five CS lines (CS-T02, CS-T04, CS-T08sh, CS-B02, and CS-B04) had higher Ca level in seed than controls. Ca levels in these CS lines varied from 1.88 to 2.63 g kg−1 compared with 1.81 and 1.72 g kg−1 for TM-1 and AMUA48, respectively, with CS-T04 having the highest Ca concentration. CS-M08sh exhibited the highest K concentration (14.50 g kg−1), an increase of 29% and 49% over TM-1 and AM UA48, respectively. Other CS lines had higher Mg, P, and S than the controls. A similar trend was found at the MS location. This research demonstrated that chromosome substitution resulted in higher seed macronutrients in some CS lines, and these CS lines with a higher content of macronutrients can be used as a genetic tool towards the identification of desired seed nutrition traits. Also, the CS lines with higher desired macronutrients can be used as parents to breed for improved nutritional quality in Upland cotton, Gossypium hirsutum L., through improvement by the interspecific introgression of desired seed nutrient traits such as Ca, K, P, S, and N. The positive and significant (p ≤ 0.0001) correlation of P with Ca, P with Mg, S with P, and S with N will aid in understanding the relationships between nutrients to improve the fertilizer management program and maintain higher cottonseed nutrient content.

Yield performance and fiber quality of Pima cotton grown in the southeast United States

AbstractCommercial production of Pima cotton (Gossypium barbadense L.) in the United States is currently limited to the western United States and West Texas. Before the 1930s, Pima cotton was produced in coastal regions of the southeast United States. However, in an effort to escape yield and economic losses caused by the boll weevil, which invaded the United States in the 1920s, production of long‐season Pima cotton was eliminated and shifted to shorter‐season upland cotton (Gossypium hirsutum L.). Today, the value of Pima cotton fiber is nearly double that of upland cotton. We hypothesized that Pima cotton could be successfully cultivated in the southeast United States because of the eradication of the boll weevil, alongside improvements in genetics and production practices. We evaluated the agronomic performance, fiber quality, and net economic return of 48 Pima genotypes in field trials conducted during 2018 and 2019 in Florence, SC, compared with two popular commercial upland cultivars. We also evaluated the impact of the ginning method (saw vs. roller) on fiber quality. On average, in comparison with upland cotton, the lint yield of Pima genotypes was reduced by half. However, most of the Pima genotypes produced higher‐quality fibers compared with the upland checks. Surprisingly, the ginning method appeared to have little impact on fiber quality. Net return analysis revealed no significant differences among several of the higher‐yielding, higher‐quality Pima genotypes and the upland genotypes in this study, indicating that the reintroduction of a Pima production system in the southeast United States may be feasible.

Dissecting Source-Sink Relationship of Subtending Leaf for Yield and Fiber Quality Attributes in Upland Cotton (Gossypium hirsutum L.).

Photosynthesis as a source is a significant contributor to the reproductive sink affecting cotton yield and fiber quality. Moreover, carbon assimilation from subtending leaves adds up a significant proportion to the reproductive sink. Therefore, this study aimed to address the source-sink relationship of boll subtending leaf with fiber quality and yield related traits in upland cotton. A core collection of 355 upland cotton accessions was subjected to subtending leaf removal treatment effects across 2 years. The analysis of variance suggested a significant effect range in the source-sink relationship under subtending leaf removal effects at different growth stages. Further insight into the variation was provided by the correlation analysis and principal component analysis. A significant positive correlation between different traits was observed and the multivariate analysis including hierarchical clustering and principal component analysis (PCA) categorised germplasm accessions into three groups on the basis of four subtending leaf removal treatment effects across 2 years. A set of genotypes with the lowest and highest treatment effects has been identified. Selected accessions and the outcome of the current study may provide a basis for a further study to explore the molecular mechanism of source-sink relationship of boll subtending leaf and utilization of breeding programs focused on cotton improvement.

Reuse of water from real reactive monochromic and trichromic wastewater for new cotton dyes after efficient treatment using H2O2 catalyzed by UV light

The textile industry widely uses reactive dyes to obtain cotton fabrics having good resistance to color removal despite frequent washing. This level of dye usage generates substantial volumes of wastewater containing significant quantities of residual dye requiring treatment before discharges from commercial dyeing operations to public waterways. As part of a study aimed at recycling/reusing rather than discharging reactive dye wastewater, well-known dyes Reactive Yellow 176, Reactive Red 241, and Reactive Blue 221 were used in dyeing cotton fabric, and the generated wastewater samples were decolorized with H2O2 catalyzed by UV light. The efficiency of UV/H2O2 decolorization for trichromic wastewater was determined by UV-Vis monitoring at 550 nm, wherein it was found that more than 91% of color removal in trichromic wastewater occurred at pH 4. The reuse of wastewater was investigated by a total of three sequential cycles of wastewater treatments. The quality of cotton dyed with reused wastewater was assessed through color measurements using CIELAB, fastness to light, and wash fastness testing. Results showed that MCT/VS-based reactive dye wastewater arising from UV/ H2O2 treatment could be used for two subsequent dyeing cycles without compromising the quality of the color of the dyed cotton fabrics. The proposed treatment can also save water and salt, enhancing the economy of the dyeing process.

TAM KJ‐Q14 ESU and TAM 12J‐39 ESU upland cotton germplasm with improved fiber bundle strength

AbstractProduction of quality cotton yarns depends on cotton fibers that are long, strong, and uniform in length. Upland cotton (Gossypium hirsutum L.) yarn produced in the United States is spun predominately on open‐end spinning technology, while globally, ring technology predominates. Open‐end technology offers speed of production, while ring offers flexibility in size and quality of yarn. A newer technology, vortex spinning, provides spinning speeds that exceed that of open‐end spinning and is 30 times that of ring spinning. In order for upland cotton fibers to compete with man‐made fibers as newer technology is adopted, breeders must develop genotypes that produce longer, stronger, and finer fibers that are more uniform in length distribution. The Cotton Improvement Program at Texas A&M AgriLife Research has developed and released upland cotton germplasm with fiber length equal to that of pima cotton (G. barbadense L.) and fiber strength greater than upland cultivars currently marketed. TAM KJ‐Q14 ESU (extra strength upland) and TAM 12J‐39 ESU (Reg. no. GP‐1084, PI 698109 and Reg. no. GP‐1085 PI 698110, respectively) were developed as part of the effort to provide upland cotton breeders with parental material to incorporate fiber strength into new cultivars. TAM KJ‐Q14 ESU combines excellent fiber length with fiber strength exceeding 350 kN m kg–1 while TAM 12J‐39 ESU combines competitive yield potential with fiber strength exceeding 350 kN m kg–1. Both germplasm lines will provide breeders with additional sources of excellent fiber strength in good to excellent agronomic profiles.

Establish real-time monitoring models of cotton aphid quantity based on different leaf positions in cotton seedlings

Cotton aphids, Aphis gossypii glover, are major pest threats to cotton plants, leading to quality and yield loss of cotton. Rapid and accurate evaluation on the occurrence and quantity of cotton aphids can help precision management and treatment of cotton aphids. The occurrence rules of cotton aphids on different leaf positions in cotton seedling stage for two cultivars of cotton were studied. The quantity of cotton aphids in the whole cotton seedlings were predicted based on the single leaf cotton aphid quantity. The correlation analysis results showed that cotton aphids of single leaf were significantly and positively correlated with the infected time, the all leaves of the whole plant, the whole plant contained all leaves and branches. The variance analysis results showed that cotton aphids of single leaf were significant difference with the extension of infected time. Based on different leaf positions, monitoring models were constructed respectively. The modelling set’s determination coefficient of ‘Xinluzao-45’ was greater than 0.8, while ‘Lumainyan-24’ was greater than 0.6. The best monitoring leaf position was the third for ‘Xinluzao-45’, the sixth for ‘Lumianyan-24’. From the data analysis, we can realize that it is feasible to construct a monitoring model based on the occurrence of cotton aphid in one leaf in cotton seedling, and different cotton varieties have different leaf positions. This will greatly reduce the investment of manpower and time.

Interactive effect of nitrogen fertilizer and plant density on photosynthetic and agronomical traits of cotton at different growth stages.

Individual effects of application of nitrogen (N) and plant densities (PD) were reported in various studies; however an interactive effect of N and PD in cotton was not studied. To explore the benefits of interactive effects of N fertilizer and PD to increase the quality of cotton. This study was carried out in randomized complete block design (RCBD) with split plot arrangement. In split plot arrangement, main plot was consisted of N application rate and in sub plots different PD were done. There were two nitrogen levels; low N level (F1) 120 kg ha−1 and high N level (F2) 180 kg ha−1 and three planting densities; 8 plants m−2 as low density (LD), 10 plants m−2 as medium density (MD) and 12 plants m−2 as high density (HD). In this study we observed the interactive effect of N application levels and PD on cotton photosynthetic and agronomic traits of various stages of development. Results showed that cotton growth and N contents was varied among treatments on different development stages. Plant biomass production, photosynthetic rate (Pn), intercellular CO2 (Ci), water use efficiency (WUE) and N contents were unaffected at the seedling stage by N application rate and PD, however, the highest Pn, Ci and N contents was at squaring stage followed by blooming stage. Higher seed cotton yield and lint yield were obtained F1 with HD, and F2 with MD yielded the highest N contents and cotton yield among treatments. We found that the squaring stage was more critical, followed by the blooming stage when considering N rate and PD.