Abstract
BackgroundThe layout of drip tapes under mulch has changed in Xinjiang, China, with the development of machine-harvest cotton (Gossypium hirsutum L.) planting technology. This study aims to demonstrate the effects of drip tape modes on soil hydrothermal conditions, cotton yield, and water use efficiency (WUE) of machine-harvest cotton under mulch in Xinjiang.MethodsA field experiment was conducted to set up two machine-harvest cotton planting patterns (T1: the cotton planting model with one film, two drip tapes and six rows; T2: the cotton planting model with one film, three drip tapes and six rows), and a conventional planting mode (T3: the cotton planting model with one film, two drip tapes and four rows) as a control.ResultsOur results showed that the heat preservation and warming effects of the cotton planting model with one film, two drip tapes and six rows and the cotton planting model with one film, three drip tapes and six rows were better than that of the conventional planting mode. Soil temperature under the mulching film quickly increased and slowly decreased, which was beneficial to the early growth and development of cotton. The mean soil moisture content of the 0–60 cm soil layer in the cotton planting model with one film, three drip tapes and six rows was significantly higher than the other two treatments at the middle and late stage of cotton growth (90 days after sowing (DAS) and 135 DAS). Moreover, the water holding capacity of the middle and upper part of the tillage layer in the cotton planting model with one film, three drip tapes and six rows was the best. At the medium cotton growth stage, the main root layer in the cotton planting model with one film, three drip tapes and six rows formed a desalination zone. At the late cotton growth stage, the soil salinity content of the 0–60 cm soil layer showed that the cotton planting model with one film, three drip tapes and six rows was the lowest, the cotton planting model with one film, two drip tapes and six rows was the highest, and the conventional planting pattern was in the middle. Among these three modes, the cotton planting model with one film, three drip tapes and six rows was more efficient in controlling soil salt accumulation. The agronomic traits and cotton quality in the cotton planting model with one film, three drip tapes and six rows were better than that for the other two treatments. Compared with the other treatments, the cotton yield in the cotton planting model with one film, three drip tapes and six rows increased by 6.15% and 11.0% and 8.1% and 12.3%, in 2017 and 2018, respectively, and WUE increased by 17.4% and 22.7% and 20.9% and 22.8%, in 2017 and 2018 respectively. In conclusion, the cotton planting model with one film, three drip tapes and six rows can be recommended for machine-harvest cotton planting for arid areas in Xinjiang, considering water conservation and improving cotton yield.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.