Pump Current Research Articles

SELECTION OF THE OPTIMAL MACHINERY COMPLEX FOR CONSTRUCTING IRRIGATION CANALS WITH A PARABOLIC PROFILE

An analysis of the experience of dredger operation in various industries allows us to identify the following main problems that need to be addressed to improve their efficiency: improvement of papillonation schemes and structural enhancement of the main equipment from a hydraulic perspective. The current soil intake devices, suction lines, and soil pumps do not always fully meet the specific requirements of soil development conditions. The objectives of the present research were to propose ways to enhance the performance of systems for automatic control of dredger work movements and automatic regulation of the soil intake process. These proposals aim to create a parabolic cross-sectional shape of the canal during development, ensure the highest productivity and lowest energy consumption, as well as low work costs, using modern control devices. The effect of the proposed technology for canal development using dredgers with automated papillonation consists of the following: providing the developed canals with a stable cross-sectional shape; automating the papillonation of the dredger and optimizing the operation of the soil pump; Implementing shift-based production accounting; using soil meters in the automated system. Giving the developed canal a cross-sectional shape that is stable in both hydraulic and static aspects has allowed for the following benefits: increased sediment transport capacity of the flow, while simultaneously reducing the cross-sectional area, growth of vegetation, water level fluctuations, water losses, and the right-of-way strip; reduced the volume of cleaning work by up to 20%; increased the period between cleanings by ensuring uniform flow movement; enhanced the productivity of dredgers by concentrating sediment on the canal slopes without changing the overall volume of cleaning.

Electro-Hydraulic Variable-Speed Drive Network Technology—First Experimental Validation

The improvement of the energy efficiency of hydraulic systems remains an essential challenge for industry, and the demand for more sustainable solutions is increasing. A main focus in this endeavor is the ability to eliminate or strongly reduce the use of throttle control valves which have been the preferred control element in industrial hydraulic systems for decades. Components have been subject to continuous evolution, and current industrial grade hydraulic pumps and motors are both efficient and reliable. Even though few percentages of energy efficiency can still be achieved, the main achievements in terms of efficiency are associated with novel system designs rather than further development of components. An area subject to increasing attention is the field of variable-speed displacement control, allowing to avoid the main control valve throttle losses. Systems using this technology are, however, mainly developed as standalone drive systems, necessitating maximum force, speed, and power installed in each axis, with limited hydraulic power distribution capability compared to valve-controlled systems. An emerging field addressing this challenge is that of so-called electro-hydraulic variable-speed drive networks, which allow to completely eliminate the use of control valves and enable power sharing both electrically and hydraulically, potentially reducing the necessary installed power in many cases. The idea of such a technology was first proposed in 2022, and so far developments reported in the literature have mainly been of a theoretical nature. This article presents the first ever experimental results for a dual-cylinder electro-hydraulic variable-speed drive network prototype. The prototype was developed for an industrial application, but has initially been implemented in a laboratory testbench. Extensive data acquisition has been conducted while subject to the associated industrial motion cycle, under different load conditions. The data obtained are further used in combination with models to predict the total efficiency of the drive network prototype under higher loads than what could be achieved in the laboratory, suggesting a total efficiency from the electric supply to the cylinder pistons of 68%. Re-configuring the prototype to a known standalone drive system structure implies comparable efficiencies. Finally, the drive network is theoretically compared to a valve drive solution, generally suggesting that the prototype drive network can provide efficiency improvements of at least 40% in comparison.

Studies on hybrid solar collector with water driven solar tracking unit

ABSTRACT The current solar concentrating collectors can be driven by water gravity without using a torque motor. It saves the electricity required to drive the large solar concentrating collectors. The objective of this study is to simulate and experimentally evaluate a novel hybrid system that combines photovoltaic and thermal technology with a hydro-powered solar tracking unit. The device consists of a hybrid solar collector, which is a multi-reflector compound parabolic collector (MRCPC), an evacuated tube receiver, photovoltaic (PV) panels, and a tracking system. The tracking mechanism attaches the tracking weights to both sides of a chain and sprocket. This hybrid collector rotates around its axis by adjusting the weight of the water in each of the monitoring weights. The system integrates a 12-volt direct current pump (operated by photovoltaic power) for tracking, with flow rate control. A mathematical model is developed and applied to determine the ideal tilt angle for a solar concentrating collector. The model was then used to compare the actual tilt angle and minimize errors in tracking. An experimental investigation used a flow rate of 0.8 LPM. The study achieved a mean tracking error of 2.05º, a maximum thermal efficiency of 43.65%, a maximum solar PV efficiency of 11.30%, and a maximum overall efficiency of 29.81%. An analytical method was developed to simulate the collector’s outlet temperature.

Experimental study of the influence of variable external optical feedback on visible laser diode speckle.

This study employs an experimental setup with a variable feedback fraction (fext), external cavity length (ECL), and pump current (J) to investigate their relationships with optical linewidth and external optical feedback-induced speckle contrast (SC) reduction in a visible laser diode. In total, speckle contrast and optical linewidth data for seven feedback fractions, two pump currents, and three external cavity lengths were collected. Achieving optical linewidths up to 3.90 nm (1/e2 width) and a reduction in speckle contrast of up to 41.6%, we also revealed negative correlations between speckle contrast and optical linewidth, and speckle contrast and feedback fraction, and a positive correlation between optical linewidth and feedback fraction.

Broadband chaos of an interband cascade laser with a 6-GHz bandwidth.

Near-infrared semiconductor lasers subject to optical feedback usually produce chaos with a broad bandwidth of a few GHz. However, the reported mid-infrared interband cascade lasers (ICLs) only show chaos with a limited bandwidth below 1 GHz. Here we show that an ICL with optical feedback is able to generate broadband chaos as well. The mid-infrared chaos exhibits a remarkable bandwidth of about 6 GHz, which is comparable to that of the near-infrared counterpart. In addition, the spectral coverage in the electrical domain reaches as high as 17.7 GHz. It is found that the chaos bandwidth generally broadens with increasing feedback ratio and/or increasing pump current of the laser, while it is insensitive to the feedback length.

Effects of Acute Hypernatremia on the Electrophysiology of Single Human Ventricular Cardiomyocytes: An In Silico Study.

Clinical and experimental data on the cardiac effects of acute hypernatremia are scarce and inconsistent. We aimed to determine and understand the effects of different levels of acute hypernatremia on the human ventricular action potential. We performed computer simulations using two different, very comprehensive models of the electrical activity of a single human ventricular cardiomyocyte, i.e., the Tomek-Rodriguez model following the O'Hara-Rudy dynamic (ORd) model and the Bartolucci-Passini-Severi model as published in 2020 (known as the ToR-ORd and BPS2020 models, respectively). Mild to extreme levels of hypernatremia were introduced into each model based on experimental data on the effects of hypernatremia on cell volume and individual ion currents. In both models, we observed an increase in the intracellular sodium and potassium concentrations, an increase in the peak amplitude of the intracellular calcium concentration, a hyperpolarization of the resting membrane potential, a prolongation of the action potential, an increase in the maximum upstroke velocity, and an increase in the threshold stimulus current at all levels of hypernatremia and all stimulus rates tested. The magnitude of all of these effects was relatively small in the case of mild to severe hypernatremia but substantial in the case of extreme hypernatremia. The effects on the action potential were related to an increase in the sodium-potassium pump current, an increase in the sodium-calcium exchange current, a decrease in the rapid and slow delayed rectifier potassium currents, and an increase in the fast and late sodium currents. The effects of mild to severe hypernatremia on the electrical activity of human ventricular cardiomyocytes are relatively small. In the case of extreme hypernatremia, the effects are more pronounced, especially regarding the increase in threshold stimulus current.

Characterizing Extreme Events in a Fabry–Perot Laser with Optical Feedback

The study of extreme events (EEs) in photonics has expanded significantly due to straightforward implementation conditions. EEs have not been discussed systematically, to the best of our knowledge, in the chaotic dynamics of a Fabry–Perot laser with optical feedback, so we address this in the current contribution. Herein, we not only find EEs in all modes but also divide the EEs in total output into two categories for further discussion. The two types of EEs have similar statistical features to conventional rogue waves. The occurrence probability of EEs undergoes a saturation effect as the feedback strength increases. Additionally, we analyze the influence of feedback strength, feedback delay, and pump current on the probability of EEs defined by two criteria of EEs and find similar trends. We hope that this work contributes to a deep understanding and serves as inspiration for further research into various multimode semiconductor laser systems.

Enhancing the solar water pumping efficiency through Beta MPPT method-controlled drive

This paper presents an innovative approach to achieve efficient solar water pumping through the integration of a Photovoltaic (PV) array and a Brushless Direct Current (BLDC) motor water pumping system. The system incorporates a Voltage Source Converter (VSC) with six switches, utilized to facilitate commutation. The inherent solar radiation is harnessed by the PV array, capitalizing on its renewable nature to generate electricity. By dynamically adjusting the switching states of the six VSC switches, the speed of the BLDC motor is modulated in response to the varying levels of available solar radiation. The BLDC motor's hall sensor signals play a crucial for determining the rotor's position and they are employed to generate precise commutation signals. The control strategy integrates the Incremental Conductance (INC) Maximum Power Point Tracking (MPPT) algorithm, which initially governs the commutation signals. To enhance adaptability to rapidly changing solar irradiation conditions, the control strategy dynamically updates the commutation signals using the innovative Beta MPPT algorithm. To assess the efficiency of the proposed control strategy, a comprehensive comparison between the INC and Beta MPPT algorithms is conducted using MATLAB Simulink. The performance of the BLDC motor under these algorithms was evaluated in terms of its ability to optimize energy extraction. The graphical analysis of these algorithms, considering the temporal aspect, substantiates the identification of the superior MPPT algorithm for BLDC motor control in solar water pumping applications. This study contributes to the advancement of solar water pumping systems by introducing a novel control approach that combines PV array utilization, VSC-based commutation, and a dual-step MPPT algorithm. The results demonstrate the effectiveness of the Beta MPPT algorithm by enabling the system to respond promptly to fluctuating solar irradiation conditions, thereby enhancing the overall efficiency of the solar water pumping process.

In situ effective pumping speed measurements as a tool for non-evaporable getter activation and saturation monitoring

We have developed method of in situ effective pumping speed measurements based on injecting finite gas pulse into a vacuum volume and subsequent recording of pressure response using a Residual Gas Analyzer (RGA). The pressure burst caused by injected gas pulse falls exponentially in time and the exponential coefficient of such pressure decay is proportional to total effective pumping speed of all vacuum pumps acting on vacuum chamber volume. The effective pumping speed can be extracted from the dependence of injected gas species pressure vs time recorded by an RGA. Non-Evaporable Getters (NEGs) are widely used in multiple ultra and extremely high vacuum devices and applications during the last several decades. Areas of NEG applications were recently expanded into vacuum devices with relatively high-pressure levels (up to 10−7 Torr) by the invention of high capacity ZAO NEG which can be operated at elevated temperatures. The intrinsic property of all NEG-based vacuum pumps is the reduction of their pumping speed, called “NEG saturation”, after an extended period of operation. Typical time interval for such process can span from about a month and up to a few years depending on NEG type, vacuum level of NEG pump operation, and residual gas content. After that, the NEG pump will require a re-activation cycle to restore its pumping speed close to the initial value. For many applications it is difficult to realize what is the current pumping speed of NEG pump is and when the pump should be re-activated. A method for in situ effective pumping speed measurements developed in this study can be used as a tool for NEG-based pump activation and saturation monitoring. Application of such an approach to monitor pumping status of NEG pumps was utilized and will be continually used at Extended EBIS which was recently developed and commissioned for Relativistic Heavy Ion Collider (RHIC) and future Electron Ion Collider (EIC). The results obtained during commissioning are presented and discussed.

Improved power and temperature performance of half-disk diode microlasers.

The power and temperature characteristics of Ø200 µm half-disk microlasers with a half-ring metal contact and high-density InGaAs/GaAs quantum dots are studied. In a continuous wave (CW) mode, the maximal optical power at 20°C was 134 mW, and the maximal CW lasing temperature reached 113°C. In a pulsed regime the maximal optical power of 1.6 W, limited by catastrophic degradation, was achieved. By comparing the CW and pulsed current-voltage characteristics, the dependence of a microlaser temperature on CW pumping current was determined. At CW currents corresponding to the maximal wall-plug efficiency, the maximal optical power, and complete lasing quenching, the laser temperatures were 60, 99, and 149°C, respectively.

Development of a Real-time Force-based Algorithm for Infusion Failure Detection.

Continuous subcutaneous insulin infusion (CSII) is a common treatment option for people with diabetes (PWD), but insulin infusion failures pose a significant challenge, leading to hyperglycemia, diabetes burnout, and increased hospitalizations. Current CSII pumps' occlusion alarm systems are limited in detecting infusion failures; therefore, a more effective detection method is needed. We conducted five preclinical animal studies to collect data on infusion failures, utilizing both insulin and non-insulin boluses. Data were captured using in-line pressure and flow rate sensors, with additional force data from CSII pumps' onboard sensors in one study. A novel classifier model was developed using this dataset, aimed at detecting different types of infusion failures through direct utilization of force sensor data. Performance was compared against various occlusion alarm thresholds from commercially available CSII pumps. The testing dataset included 251 boluses. The Bagging classifier model showed the highest performance metrics among the models tested, exhibiting high accuracy (96%), sensitivity (94%), and specificity (98%), with lower false-positive and false-negative rate compared with traditional occlusion alarm pressure thresholds. Our study developed a novel non-threshold classifier that outperforms current occlusion alarm systems in CSII pumps in detecting infusion failures. This advancement has the potential to reduce the risk of hyperglycemia and hospitalizations due to undetected infusion failures, offering a more reliable and effective CSII therapy for PWD. Further studies involving human participants are recommended to validate these findings and assess the classifier's performance in a real-world setting.

Nonlinear dynamics of an interband cascade laser with optical injection

This work reports the nonlinear dynamics of a mid-infrared interband cascade laser (ICL) subject to optical injection. It is shown that the stable locking regime is asymmetric and broadens with increasing injection strength. Outside the locking regime, the ICL mostly produces period-one oscillations. However, three categories of periodic pulse oscillations are observed in the vicinity of the Hopf bifurcation and the saddle-node bifurcation. In particular, it is found that the ICL generates broadband chaos at a near-threshold pump current, and the chaos bandwidth is over 300 MHz.

Thermoacoustic micro-CHP system for low-grade thermal energy utilization in residential buildings

Effectively utilizing low-grade thermal energy is a promising approach to mitigating greenhouse gas emissions while reducing the burden on centralized power grids. Current thermoacoustic heat pumps and power generators face challenges such as high onset temperature differentials and low performance. This paper addresses these challenges by introducing a gas-liquid resonator into a thermoacoustic combined heat and power systems to recover low-grade thermal energy in residential buildings. Through Sage modeling and calculations, the internal characteristics of the proposed system and its output performance under different operating conditions are explored. At a heating temperature of 350 °C, the system can generate 6.4 kW of output thermal power, 0.9 kW of electricity, and overall exergy efficiency is 79.3 %. Combining neural network models with case studies conducted in Spain and Finland, the system can annually save 5.6 MWh and 20.7 MWh in fuel energy, reduce emissions of 1374 kg and 5180 kg of carbon dioxide, and save a total cost of €611 and €2324, respectively. Furthermore, comparisons with other emerging micro-CHP systems highlight the efficiency of the proposed system. These results indicate the high potential of thermoacoustic combined heat and power systems in recovering low-grade thermal energy and achieving energy savings and emission reductions.

Design and simulation optimization of phase-locked loop structure for phase-shifting power supply

A phase-locked loop (PLL) of a phase-shifting power supply for the power system is designed in this paper. Taking the industrial frequency current as the reference signal, the input and output characteristics of the phase-frequency detector with charge pump are analyzed. In addition, the transfer function of the PLL system is analyzed by combining the passive second-order low-pass filter and the voltage-controlled oscillator. As a result, the influence of parameters such as charge pump current, phase margin, and loop bandwidth on the performance of the PLL is investigated, and the optimal parameters of each section are obtained. The results show that the optimized PLL has a locking time of 0.75 s, a pull-out range of 63.16 Hz, and a locking range of 43.82 Hz, with high stability and noise immunity.

A novel bidirectionally operated chirped quantum-dot based semiconductor optical amplifier using a dual ground state spectrum

Bi-directionally operated amplifiers enabling efficient utilization of transmission wavelengths are promising candidates in densely integrated photonic circuits for future cost-effective, power-efficient optical networks. Here, we demonstrate, for the first time, a broadband semiconductor optical amplifier (SOA) based on a novel chirped multilayered quantum dot (QD) structure, which is suitable for bi-directional amplification via the dual ground state (GS) emission spectrum. The fabricated QD SOA has achieved a maximum 3-dB gain bandwidth of 50 nm while retaining on-chip gain above 20 dB at both GS wavelengths. Under an optimum pumping current of 280 mA, the bi-directionally operated QD SOA has shown around 10 dB receiver sensitivity improvement in ultra-high-speed 100 Gbaud non-return-to-zero and 53.125 Gbaud four-level pulse amplitude modulation data transmission systems.

Saturated Gain-Induced Non-Reciprocal Transmission and Broadband On-Chip Optical Isolator

To overcome the limitation of dynamic reciprocity, a new method for designing broadband on-chip optical isolators is proposed and demonstrated based on saturated gain, which is able to support simplex and duplex operation modes. By connecting a saturated gain waveguide to an appropriate linear loss waveguide, broadband isolation is predicted and proved theoretically through saturated gain-induced non-reciprocal transmission. The proposed isolator is numerically demonstrated with an operating band of 59 nm and an isolation ratio of −20 dB at the central wavelength of 1550 nm. It is noteworthy that when the current pump changes, the isolator still works well and keeps the high isolation ratio at a different input power. The footprint of the whole device is 465 μm × 0.35 μm which satisfies the requirement of photonic integrated circuits. The proposed isolator, with the combined advantages of compact footprint, broadband, duplex operation and high isolation, can enable on-chip unidirectional transmission and complex topological routing designation.

OPTIMIZATION OF THE CONDENSATE PUMPING SYSTEM AT THE GASOLINE SELECTIVE HYDROTREATING PLANT

The article discusses issues related to energy saving of the coolant – high, medium and low pressure water vapor in the condensate pumping system at the gasoline selective hydrotreating plant. The analysis of the current condensate pumping system is carried out and its main disadvantages are indicated. Retrofitting of the pumping system is proposed. A return line has been added and a pair of centrifugal pumps has been included in the technological scheme, a calculation has been made. The replacement of the equipment will optimize the steam consumption inside the gasoline selective hydrotreating plant and will reduce the cost of repair and maintenance of the unit, as well as electricity consumed for technological needs.

SOLAR POWERED OFF-GRID WATER DISTRIBUTION PROJECTS: A CASE STUDY COMPARISON OF TWO COMMUNITIES

This paper presents the pre-construction planning and construction installation phases of student-run projects in Ecuador and Ghana to provide fresh water via pumped water storage through photovoltaic (PV) systems. Our Ecuadorian project relied on a preliminary design prepared by a non-profit organization as the construction basis. The Ghanian project was designed by students, with faculty support. These two case studies were chosen because they had similar project goals, occurred close in time, and had the same faculty and student clubs performing the work. The fundamental project management areas of scope, schedule, and budget management were assessed as a basis for comparison. Although there were several differences between the projects, students gained new knowledge in all of these areas. The work involved several students and two faculty from California Polytechnic State University, San Luis Obispo (Cal Poly). The work included piping connections to direct current submersible pumps, water storage, distribution piping/connections to a village community center or directly to households, PV panels, and an electrical distribution system with overcurrent protection. The initial design was an important part of each project; however, many details were resolved during construction using a design-build approach.

Numerical and Experimental Investigations on the Acoustic Characteristics of a Single-Stage Centrifugal Pump

The acoustic properties of a single-stage centrifugal pump with low specific speed are investigated by means of compressible 3D CFD simulations (URANS) and experiments. In order to determine the pump’s acoustic transmission and excitation characteristics, a four-pole approach in the frequency domain is used. The transmission parameters determined by simulation are compared to experiments in water and air as functions of the Helmholtz number. The results indicate that the acoustic transmission characteristics within the experiments are significantly influenced by the structural compliance of the volute casing in terms of a fluid–structure interaction (FSI). A modelling approach for a one-dimensional representation of the centrifugal pump’s acoustic transmission characteristics in the time and frequency domains is applied to the current pump. As one model parameter, the effective speed of sound in the 1D model needs to be reduced to 607 ms−1 to account for the FSI. The agreement of the simulation results and the experiments underlines the above statement about the influence of the FSI. In a last step, the acoustic excitation parameter, depicted as monopole and dipole amplitudes, at two different blade-passing frequencies (fBP≈[111;169] Hz) are determined for several operating points. Especially for dipole amplitudes, a good agreement between experiments and simulations can be seen. The monopole amplitudes are also of similar orders of magnitude, but show stronger deviations. The cause of discrepancies between the 3D CFD simulations and experiments is believed to be the neglected influence of the FSI and surface roughness as well as the inaccurate reproduction of flow separation at the volute’s tongue due to the use of wall functions. A final important observation made during the numerical investigations is that the excitation mechanisms at the blade-passing frequency are probably independent of the piping system’s acoustic impedance.

Unit vector template controlled grid integrated and solar fed BLDC drive-based water pumping system

With increased population and energy demand, the need to utilize renewable energy becomes so vital. The need to manage food demand globally also emphasizes the support to agriculture. This article proposes a unit vector template-controlled grid-integrated solar Photovoltaic (PV) powered three-phase Brushless Direct Current (BLDC) drive-based water pumping system. The proposed system includes solar photovoltaic, boost converter, voltage source inverter, single phase grid supply, single phase bidirectional voltage source converter, and BLDC-driven water pump. The solar PV is connected to the dc grid through the boost converter. An incremental conductance algorithm performs the Maximum Power Point Tracking (MPPT) of a Photovoltaic array. The power exchange between the dc-bus and the utility grid has been achieved through a unit vector template algorithm-controlled bidirectional voltage source converter. It allows a consumer to operate a water pump at maximum capacity for the whole day regardless of the weather and to supply a single-phase power grid when water pumping is unnecessary. A 3-phase BLDC motor-based water pump is driven by a 3-phase voltage source inverter, which is used for electronic commutation and to regulate the motor speed. The performance of the proposed system has been evaluated for different modes of peak, rms voltage and motor speed has been maintained around 255 V and 180 V and 2500 rpm respectively in all the modes of operation. Its practicality and trustworthiness are shown by different simulation results using MATLAB/Simulink version 2022bsoftware.