Personal Care Products Research Articles

Reproductive & developmental toxicity of quaternary ammonium compounds†.

Quaternary ammonium compounds are a class of chemicals commonly used as disinfectants in household and healthcare settings. Their usage has significantly increased in recent years due to the COVID-19 pandemic. In addition, quaternary ammonium compounds have replaced the recently banned disinfectants triclosan and triclocarban in consumer products. Quaternary ammonium compounds are found in daily antimicrobial and personal care products such as household disinfectants, mouthwash, and hair care products. Due to the pervasiveness of quaternary ammonium compounds in daily use products, humans are constantly exposed. However, little is known about the health effects of everyday quaternary ammonium compound exposure, particularly effects on human reproduction and development. Studies that investigate the harmful effects of quaternary ammonium compounds on reproduction are largely limited to high-dose studies, which may not be predictive of low-dose, daily exposure, especially as quaternary ammonium compounds may be endocrine-disrupting chemicals. This review analyzes recent studies on quaternary ammonium compound effects on reproductive health, identifies knowledge gaps, and recommends future directions in quaternary ammonium compound-related research. Summary Sentence Quaternary ammonium compounds, a class of disinfecting compounds that have skyrocketed in usage during the COVID-19 pandemic, are emerging as reproductive and developmental toxicants.

The formation of lamellar body-like structures may be a trigger of cetylpyridinium chloride-induced cell death and inflammatory response

Cetylpyridinium chloride (CPC) is a quaternary ammonium compound used widely in health and personal care products. Meanwhile, due to its increasing use, its potential adverse health effects are emerging as a topic of public concern. In this study, we first administered CPC by pharyngeal aspiration to determine the survival level (the maximum concentration at which no death is observed) and then administered CPC to mice repeatedly for 28 days using the survival level as the highest concentration. CPC increased the total number of pulmonary cells secreting pro- and anti-inflammatory cytokines and chemokines. Infiltration of inflammatory cells, production of foamy alveolar macrophages, and chronic inflammatory lesions were found in the lung tissue of male and female mice exposed to the highest dose of CPC. We also investigated the toxicity mechanism using BEAS-2B cells isolated from normal human bronchial epithelium. At 6 h after exposure to CPC, the cells underwent non-apoptotic cell death, especially at concentrations greater than 2 μg/mL. The expression of the transferrin receptor was remarkably enhanced, and the expression of proteins that contribute to intracellular iron storage was inhibited. The expression of both mitochondrial SOD and catalase increased with CPC concentration, and PARP protein was cleaved, suggesting possible DNA damage. In addition, the internal structure of mitochondria was disrupted, and fusion between damaged organelles was observed in the cytoplasm. Most importantly, lamellar body-like structures and autophagosome-like vacuoles were found in CPC-treated cells, with enhanced expression of ABCA3 protein, a marker for lamellar body, and a docking score between ABCA3 protein and CPC was considered to be approximately −6.8969 kcal/mol. From these results, we propose that mitochondrial damage and iron depletion may contribute to CPC-induced non-apoptotic cell death and that pulmonary accumulation of cell debris may be closely associated with the inflammatory response. Furthermore, we hypothesize that the formation of lamellar body-like structures may be a trigger for CPC-induced cell death.

Effects of functional groups of polyfluoroalkyl substances on their removal by nanofiltration

Determining the reliability of nanofiltration (NF) membranes for the removal of contaminants of emerging concern, including polyfluoroalkyl substances (PFASs), pharmaceuticals, and personal care products (PPCPs), is important for ensuring drinking water safety. This study aimed to clarify the factors that influence the removal of nine major PFASs during submerged NF treatment via extrapolation based on the factors that influence PPCP removal. The rejection of nine PFASs in ultra-filtered dam water by a polypiperazine-amide (NF270) membrane increased from 71 % to 94 % at a low permeate flux of 5 L/m2 h as the PFAS molecular dimensions increased. PFASs with a carboxylic acid (-CO2H) were rejected to a greater extent than PFASs with a sulfo group (-SO3H). Further, negatively charged PFASs or PPCPs were rejected to a greater extent than uncharged and positively charged PPCPs. Our findings suggest that the rejection of PFASs can vary because of the (i) clearance distance between the PFASs’ molecular dimensions and NF membrane pore diameter and (ii) intensity of electrostatic repulsion between the PFASs’ functional groups and NF membrane surface. Our study indicates that submerged NF can achieve high PFAS rejection; however, variations in rejection among PFASs can become more prominent owing to a low permeate flux.

Determination of 16 ultraviolet–absorbing compounds in marine invertebrates by using LC-USI-MS/MS coupled with QuEChERS

In this study, we examined multiple endocrine-disrupting ultraviolet-absorbing compounds (UVACs) in marine invertebrates used in personal care products and packaging. Modified QuEChERS and liquid chromatography UniSpray ionization tandem mass spectrometry were used to identify 16 UVACs in marine invertebrates. Matrix-matched calibration curves revealed high linearity (r ≥ 0.9929), with limits of detection and quantification of 0.006–1.000 and 0.020–3.000 ng/g w.w., respectively. In oysters, intraday and interday analyses revealed acceptable accuracy (93%–120%) and precision (≤18%), except for benzophenone (BP) and ethylhexyl 4-(dimethylamino) benzoate. Analysis of 100 marine invertebrate samples revealed detection frequencies of 100%, 98%, 89%, 64%, and 100% for BP, 4-hydroxybenzophenone, 4-methylbenzophenone, 4-methylbenzylidene camphor, and benzophenone-3 (BP-3), respectively. BP and BP-3 were detected at concentrations of 4.40–27.39 and < 0.020–0.560 ng/g w.w., respectively, indicating their widespread presence. Overall, our proposed method successfully detected UVACs in marine invertebrates, raising concerns regarding their potential environmental and health effects.

Farmland’s silent threat: Comprehensive multimedia assessment of micropollutants through non-targeted screening and targeted analysis in agricultural systems

Intricate agricultural ecosystems markedly influence the dynamics of organic micropollutants, posing substantial threats to aquatic organisms and human health. This study examined the occurrence and distribution of organic micropollutants across soils, ditch sediment, and water within highly intensified farming setups. Using a non-targeted screening method, we identified 405 micropollutants across 10 sampling sites, which mainly included pesticides, pharmaceuticals, industrial chemicals, and personal care products. This inventory comprised emerging contaminants, banned pesticides, and controlled pharmaceuticals that had eluded detection via conventional monitoring. Targeted analysis showed concentrations of 3.99–1021 ng/g in soils, 4.67–2488 ng/g in sediment, and 12.5–9373 ng/L in water, respectively, for Σ40pesticides, Σ8pharmaceuticals, and Σ3industrial chemicals, indicating notable spatial variability. Soil organic carbon content and wastewater discharge were likely responsible for their spatial distribution. Principal component analysis and correlation analysis revealed a potential transfer of micropollutants across the three media. Particularly, a heightened correlation was decerned between soil and sediment micropollutant levels, highlighting the role of sorption processes. Risk quotients surpassed the threshold of 1 for 13–23 micropollutants across the three media, indicating high environmental risks. This study highlights the importance of employing non-targeted and targeted screening in assessing and managing environmental risks associated with micropollutants.

Microplastic pollutants in sediments from a water supply reservoir: Spatial heterogeneity in abundance, characteristics and pollution evaluation

When assessing microplastics (MPs) in freshwater ecosystems, previous studies have primarily focused on natural rivers and lakes, with limited attention to urban water source areas. Sediments, recording the steady process of MPs accumulation during a long period of time, can act as an important sink for MPs. In this study, we investigated the distribution, characteristics and pollution evaluation of MP contaminants in sediments of a water supply reservoir of Hefei City (the Dafangying Reservoir). Meanwhile, the differences of MP concentrations in sediments in rural and urban areas were also compared. Our results detected five shapes, seven colors and six polymer types of MPs in sediments of the Dafangying Reservoir. Polystyrene, polyethylene and polypropylene were the most abundance types of MPs identified. The average MPs abundance of sediments in rural areas was 83.20 ± 32.99 n/100 g dry weight (d.w.), and 182.67 ± 72.21 n/100 g (d.w.) in urban areas. The total MP concentrations were significantly higher in sediments of urban sites than that in rural sites, which can be ascribed to more complex and diverse MP sources triggered by intensive anthropogenic activity in cities. Specifically, we also demonstrated significantly higher microbead abundance in urban sites, which may result from the widespread use of microbead in personal care products. Given the complexity and diversity of MPs in urban areas, we exhibited a relatively higher abundance of MPs in the Dafangying Reservoir than that in other rural larger reservoirs. According to the index of geoaccumulation, the sedimentary MPs were assessed as moderately polluted. Our study enriches valuable data on the distribution of MPs contaminants in water supply reservoir, and provides theoretical references for MPs control and management in reservoir ecosystems.

Combined Exposures and Mixtures Research: An Enduring NIEHS Priority.

The National Institute of Environmental Health Sciences (NIEHS) continues to prioritize research to better understand the health effects resulting from exposure to mixtures of chemical and nonchemical stressors. Mixtures research activities over the last decade were informed by expert input during the development and deliberations of the 2011 NIEHS Workshop "Advancing Research on Mixtures: New Perspectives and Approaches for Predicting Adverse Human Health Effects." NIEHS mixtures research efforts since then have focused on key themes including a) prioritizing mixtures for study, b) translating mixtures data from in vitro and invivo studies, c) developing cross-disciplinary collaborations, d) informing component-based and whole-mixture assessment approaches, e) developing sufficient similarity methods to compare across complex mixtures, f) using systems-based approaches to evaluate mixtures, and g) focusing on management and integration of mixtures-related data. We aimed to describe NIEHS driven research on mixtures and combined exposures over the last decade and present areas for future attention. Intramural and extramural mixtures research projects have incorporated a diverse array of chemicals (e.g., polycyclic aromatic hydrocarbons, botanicals, personal care products, wildfire emissions) and nonchemical stressors (e.g., socioeconomic factors, social adversity) and have focused on many diseases (e.g., breast cancer, atherosclerosis, immune disruption). We have made significant progress in certain areas, such as developing statistical methods for evaluating multiple chemical associations in epidemiology and building translational mixtures projects that include both in vitro and invivo models. Moving forward, additional work is needed to improve mixtures data integration, elucidate interactions between chemical and nonchemical stressors, and resolve the geospatial and temporal nature of mixture exposures. Continued mixtures research will be critical to informing cumulative impact assessments and addressing complex challenges, such as environmental justice and climate change. https://doi.org/10.1289/EHP14340.

Lactiplantibacillus plantarum OL5 biosurfactants as alternative to chemical surfactants for application in eco-friendly cosmetics and skincare products.

Cosmetics have been extremely popular throughout history and continue to be so today. Cosmetic and personal care products, including toothpaste, shampoo, lotions, and makeup, are typically made with petroleum-based surfactants. Currently, there is an increasing demand to enhance the sustainability of surface-active compounds in dermal formulations. Biosurfactants, derived from living cells, are considered more environmentally friendly than synthetic surfactants. Thus, the use of biosurfactants is a promising strategy for formulating more environmentally friendly and sustainable dermal products. Biosurfactants have the potential to replace chemical surface-active agents in the cosmetic sector due to their multifunctional qualities, such as foaming, emulsifying, and skin-moisturizing activities.In this study, two glycolipopeptide biosurfactants derived from Lactiplantibacillus plantarum OL5 were used as stabilizing factors in oil-in-water emulsions in the presence of coconut oils. Both biosurfactants increased emulsion stability, particularly in the 1:3 ratio, dispersion, and droplet size. Moreover, the cytotoxicity of the two Lactiplantibacillus plantarum biosurfactants was assessed on B lymphocytes and MCF-7 cells. Overall, the results gathered herein are very promising for the development of new green cosmetic formulations.

Emerging pollutants in waste water: Challenges and advancements in treatment technology

Abstract Microplastics, per- and polyfluoroalkyl substances (PFAS), pharmaceuticals and personal care products (PPCPs), and other emerging contaminants in wastewater have all caused serious environmental and public health issues. The effectiveness of conventional wastewater treatment techniques to remove these pollutants, such as activated sludge, membrane bioreactors, and coagulation-flocculation, is often insufficient. The difficulties and improvements in treatment technology for eliminating developing contaminants from wastewater are examined in this thorough review study. The review gives a general overview of the most important subcategories of emerging pollutants, the shortcomings of traditional wastewater treatment techniques, and the developments in treatment technologies, including advanced oxidation processes (AOPs), adsorption-based methods, and novel biological treatment approaches. The obstacles mentioned include the need for sustainable and energy-efficient solutions, regulatory and monitoring concerns, and technological and economic hurdles. A number of suggestions are made as a response to these difficulties, such as boosting oversight and regulating procedures, fostering cooperation and information sharing, encouraging industry participation, and supporting research and development. These suggestions may be put into practice in order to reduce the hazards posed by developing contaminants in wastewater and safeguard our water resources and the ecosystem over the long run. The article emphasizes the value of using a multidisciplinary and cooperative approach to solving the problems caused by new contaminants. In order to create original solutions, advance best practices, and build suitable regulatory frameworks, it underlines the necessity for ongoing research, policy development, and stakeholder collaboration. The ultimate goal of this analysis is to provide academics, decision-makers, industry stakeholders, and the general public with a useful resource in their quest to comprehend and resolve the complicated problem of developing contaminants in wastewater.

Recent Advances in Biofiltration for PPCP Removal from Water

As emerging pollutants, pharmaceuticals and personal care products (PPCPs) in water have attracted more and more attention because of their harmfulness to the ecosystem and human health. Due to the perpetual input from sewage/wastewater effluents, landfill leachates, urban/agricultural runoff, etc., PPCPs in the aquatic environment are generally “pseudo-persistent”. Conventional filtration in the water treatment process cannot effectively remove PPCPs, while biofiltration, a synergistic combination of adsorption and biodegradation, is an effective upgrade method that has received great attention and application in recent years. This paper systematically reviewed the principle of biofiltration and its efficiency in the removal of PPCPs. The important operational parameters influencing biofiltration performance such as filter media, temperature, backwash conditions, empty bed contact time, etc. were summarized. In addition, the limitations and prospects of the current research on biofiltration were also pointed out.

Charged polystyrene microplastics inhibit uptake and transformation of 14C-triclosan in hydroponics-cabbage system

IntroductionSince the outbreak of COVID-19, microplastics (MPs) and triclosan in pharmaceuticals and personal care products (PPCPs) are markedly rising. MPs and triclosan are co-present in the environment, but their interactions and subsequent implications on the fate of triclosan in plants are not well understood. ObjectiveThis study aimed to investigate effects of charged polystyrene microplastics (PS-MPs) on the fate of triclosan in cabbage plants under a hydroponic system. Methods14C-labeling method and liquid chromatography coupled with quadrupole/time-of-flight mass spectrometry (LC-QTOF-MS) analysis were applied to clarify the bioaccumulation, distribution, and metabolism of triclosan in hydroponics-cabbage system. The distribution of differentially charged PS-MPs in cabbage was investigated by confocal laser scanning microscopy and scanning electron microscopy. ResultsThe results showed that MPs had a significant impact on bioaccumulation and metabolism of triclosan in hydroponics-cabbage system. PS-COO-, PS, and PS-NH3+ MPs decreased the bioaccumulation of triclosan in cabbage by 69.1 %, 81.5 %, and 87.7 %, respectively, in comparison with the non-MP treatment (control). PS-MPs also reduced the translocation of triclosan from the roots to the shoots in cabbage, with a reduction rate of 15.6 %, 28.3 %, and 65.8 % for PS-COO-, PS, and PS-NH3+, respectively. In addition, PS-NH3+ profoundly inhibited the triclosan metabolism pathways such as sulfonation, nitration, and nitrosation in the hydroponics-cabbage system. The above findings might be linked to strong adsorption between PS-NH3+ and triclosan, and PS-NH3+ may also potentially inhibit the growth of cabbage. Specially, the amount of triclosan adsorbed on PS-NH3+ was significantly greater than that on PS and PS-COO-. The cabbage biomass was reduced by 76.9 % in PS-NH3+ groups, in comparison with the control. ConclusionThe uptake and transformation of triclosan in hydroponics-cabbage system were significantly inhibited by charged PS-MPs, especially PS-NH3+. This provides new insights into the fate of triclosan and other PPCPs coexisted with microplastics for potential risk assessments.

The use of bimetallic metal-organic frameworks as restoration materials for pollutants removal from water environment.

Bimetallic metal-organic frameworks (BMOFs) are a class of functional porous materials constructed by coordination between nodes containing two different metal ions and organic ligands. Studies have shown that the catalytic activity of BMOFs is greatly improved owing to the adjustment of charge distribution and the increase of active sites as well as the synergistic effect between the bimetals, and the advantages of their large specific surface area, high porosity, unique structure and dispersed active centres make them available as important organic materials applied in the field of wastewater treatment. In this review, the preparation and construction methods for BMOFs in recent years are summarized, and we focus on their removal of different types of pollutants in the aqueous environment, including ions, dyes, pharmaceuticals or personal care products, phenolic compounds and microorganisms, as well as their corresponding removal mechanisms. In addition, we provide an outlook on their future opportunities and challenges in wastewater treatment.

Determinants of behavior towards hemp-based products: an application of the theory of planned behavior

PurposeThis paper examines how U.S. consumer intentions to adopt hemp vary across product types using the theory of planned behavior (TPB).Design/methodology/approachData were collected via an online survey of U.S. residents in 2022 (n = 1,948). Two-step structural equation modeling is used to examine how TPB constructs and background factors influence intent to use five different hemp-based products: cannabidiol (CBD), clothing, food, personal care products, and pet products. Data are analyzed using R.FindingsPositive attitudes towards all categories of hemp-based products increase the probability of adoption, while subjective norm and perceived behavioral control have limited and varied significant influence across product models. Age has a consistent significant and negative influence on adoption.Research limitations/implicationsFindings highlight consumer segmentation and marketing opportunities, inform hemp stakeholder decision-making, and provide directions for future research. Given the absence of explanatory power of SN and PBC on most product models and the diversity of products and nuanced U.S. hemp policy, future research could investigate expanded iterations of TPB. Using revealed behavior could also highlight potential intention-behavior gaps and offer more robust insights for hemp stakeholders.Originality/valueFindings contribute to a limited body of information on markets and consumer demand for hemp in the U.S.

Duo photoprotective effect via silica-coated zinc oxide nanoparticles and Vitamin C nanovesicles composites

ObjectiveZinc Oxide nanoparticles (ZnO NPs) are used widely in nowadays personal care products, especially sunscreens, as a protector against UV irradiation. Yet, they have some reports of potential toxicity. Silica is widely used to cage ZnO NPs to reduce their potential toxicity. Vitamin C derivative, Magnesium Ascorpyl Phosphate (MAP), is a potent antioxidant that can efficiently protect human skin from harmful impacts of UV irradiation and oxidative stress. The combination of silica coated ZnO NPs and MAP nanovesicles could have potential synergistic protective effect against skin photodamage.MethodsSilica coated ZnO NPs and MAP nanovesicles (ethosomes and niosomes) were synthesized, formulated, and evaluated as topical gels. These gel formulations were evaluated in mice for their photoprotective effect against UV irradiation through histopathology and immuno-histochemistry study. Split-face clinical study was conducted to compare the effect of application of silica coated ZnO NPs either alone or combined with MAP nanovesicles. Their photoprotective action was evaluated, using Antera 3D® camera, for melanin level, roughness index and wrinkles depth.ResultsSilica coated ZnO NPs when combined with MAP nanovesicles protected mice skin from UV irradiation and decreased the expression of the proinflammatory cytokines, NF-κB. Clinically, silica coated ZnO NPs, alone or combined with MAP nanovesicles, could have significant effect to decrease melanin level, roughness index and wrinkles depth with higher effect for the combination.ConclusionA composite of silica coated ZnO NPs and MAP nanovesicles could be a promising cosmetic formulation for skin protection against photodamage signs such as hyperpigmentation, roughness, and wrinkles.Graphical

Solar-light-driven photocatalytic degradation and detoxification of ciprofloxacin using sodium niobate nanocubes decorated g-C3N4 with built-in electric field

Simultaneous degradation and detoxification during pharmaceutical and personal care product removal are important for water treatment. In this study, sodium niobate nanocubes decorated with graphitic carbon nitride (NbNC/g-C3N4) were fabricated to achieve the efficient photocatalytic degradation and detoxification of ciprofloxacin (CIP) under simulated solar light. NaNbO3 nanocubes were in-situ transformed from Na2Nb2O6•H2O via thermal dehydration at the interface of g-C3N4. The optimized NbNC/g-C3N4-1 was a type-I heterojunction, which showed a high conduction band (CB) level of −1.68 eV, leading to the efficient transfer of photogenerated electrons to O2 to produce primary reactive species, •O2−. Density functional theory (DFT) calculations of the density of states indicated that C 2p and Nb 3d contributed to the CB, and 0.37 e– transferred from NaNbO3 to g-C3N4 in NbNC/g-C3N4 based on the Mulliken population analysis of the built-in electric field intensity. NbNC/g-C3N4-1 had 3.3- and 2.3-fold of CIP degradation rate constants (k1 = 0.173 min−1) compared with those of pristine g-C3N4 and NaNbO3, respectively. In addition, N24, N19, and C5 in CIP with a high Fukui index were reactive sites for electrophilic attack by •O2−, resulting in the defluorination and ring-opening of the piperazine moiety of the dominant degradation pathways. Intermediate/product identification, integrated with computational toxicity evaluation, further indicated a substantial detoxification effect during CIP degradation in the photocatalysis system.

Microplastic: Characteristics, exposure pathways, toxicity, and implication for human health

Microplastics particles ranging from 1 µm to 5 mm, have gained attention for their omnipresence in marine environments and potential health risks. Initially recognized in the 1990s, microplastics are classified as primary (designed for microscopic dimensions) or secondary (resulting from degradation). Exposure pathways include ingestion, inhalation, and dermal contact, with sources ranging from food and beverages to personal care products. These particles possess unique properties, facilitating their interaction with organic contaminants and potential bioaccumulation in marine life. Their small size allows them to infiltrate ecosystems, raising concerns about their impacts on human health. Studies suggest associations between microplastic exposure and health issues such as inflammatory bowel disease and neurodevelopmental. Microplastics exhibit toxicity through mechanisms like oxidative stress induction and disruption of neurotransmitter levels. They have been detected in human tissues, including the brain, raising concerns about potential neurological impacts. To comprehend the effects on health over time, additional research is required, including biopersistence and tissue accumulation. Regulatory measures and consumer awareness initiatives are crucial to mitigate microplastic pollution and minimize health risks. Strategies to reduce plastic production, enhance recycling, and develop microplastic removal technologies are vital for protecting both human health and the environment. In summary, microplastics pose significant health risks due to their widespread presence and potential toxicity. Understanding their impacts and implementing effective mitigation strategies are essential for safeguarding human health and environmental integrity.

Assessing the Efficiency of Microalgae in the Removal of Salicylic Acid from Contaminated Water: Insights from Zebrafish Embryo Toxicity Tests

Microalgae-based water treatments for the removal of different types of pollution have been gaining considerable attention during the last few decades. However, information about microalgae potential in the removal of pharmaceuticals and personal care products (PPCPs) and the ecotoxicological outcomes is still limited. Therefore, in this work, we aimed at investigating salicylic acid removal from water by three different microalgae strains, namely Chlorella sorokiniana, Chlorella vulgaris and Scenedesmus obliquus. For such a purpose, photobioreactors were operated under batch and semi-continuous mode. Apart from determining the reduction in the concentration of salicylic acid attained by each strain, we used zebrafish embryo bioassays to assess the efficiency of microalgae to reduce its toxicity effects. S. obliquus was the strain that achieved the most significant decrease in the concentration and toxic effects of salicylic acid. Indeed, S. obliquus was able to rescue mortality and reduce abnormalities at practically 100%. The efficiency of C. sorokiniana and, especially, that of C. vulgaris were not so remarkable, indicating that the removal of SA and its toxic effects from water by microalgae is markedly strain dependent. The obtained results proved the importance of considering toxic effects for a more comprehensive evaluation of microalgae efficiency in the removal of PPCPs in view of an adequate selection for water treatment.

Health and Environmental Impact of Xenobiotics in Water Quality Evaluation: A Review

Study’s Novelty/Excerpt This review presents a comprehensive categorization and impact analysis of xenobiotics on humans, animals, and the environment, providing a novel synthesis of current knowledge in this field. It details the diverse sources of xenobiotics, such as microplastics and pesticides, and their pervasive presence in various environmental compartments, highlighting the significant issue of surface runoff contributing to pesticide residue in surface waters. Additionally, the review innovatively integrates a discussion on advanced detection and removal techniques, including cutting-edge chromatographic methods and bioremediation strategies, offering a holistic approach to understanding and managing xenobiotic pollutants. Full Abstract Xenobiotics are compounds or chemicals to which an organism is exposed, usually in large concentrations that are inessential to the regular pattern of metabolism of that organism. This review emphasised the categorization and impact of xenobiotics on people, animals, and the environment. It also gave a general overview of the process of discharging and detecting xenobiotics and their potential environmental fates. A chart of xenobiotic categories was also provided, including industrial products, insecticides, pharmaceuticals, personal care items, and radioactive waste. Microplastics and pesticides were discussed as xenobiotic chemicals commonly found in freshwater bodies; similarly, the impact of creating substances such as personal care products, medicinal chemicals, and insecticides through technology was discussed as the source of xenobiotics. Additionally, a thorough description of how pesticide pollution affects common environmental compartments such as soils, streambed sediment, groundwater, and surface water is provided since surface runoff accounts for more than 10% of pesticide residue in surface rivers. Effective techniques, including Fourier Transform Infrared (FTIR), High-Performance Liquid Chromatography (HPLC), Ultra-Performance Liquid Chromatography (UPLC), Gas Chromatography-Mass Spectrometry GC/MS, and Atomic Absorption Spectroscopy (AAS) along with diverse chromatographic techniques were also discussed as techniques for the analysis of xenobiotics. These techniques are often paired with state-of-the-art detection techniques like high-resolution mass spectrometry (HRMS). Highlighted as well were techniques for the removal of xenobiotics using membrane processes, improved oxidation processes, engineered wetlands, photocatalytic degradation, biotransformation, bioremediation, photo-remediation, adsorption, and bioremediation to decrease the side effects.

Paper-based disposable electrochemical sensor from readily available materials for cost-effective triclosan detection

This study introduces a disposable electrochemical sensor fabricated from readily available low-cost materials. The design features a three-electrode electrochemical cell made of a simple graphite dry lubricant and silicone sealant composite, screen-printed onto a sulphite paper substrate. The ideal composite mixture was stablished through factorial design. The sensors were applied to the electroanalytical detection of triclosan, an antimicrobial agent used in personal care products, with concerns about its impact on ecosystems and human health. A subsequent factorial design determined the optimal voltammetric conditions. This approach yielded a method with limits of detection and quantification of 0.05 μmol L–1 and 0.17 μmol L–1, respectively, with a linear range from 0.20 μmol L–1 to 10.30 μmol L–1 for triclosan. The method was successfully applied to analyze triclosan in tap water and personal care products, including toothpaste, mouthwash, and liquid soap, achieving recovery rates ranging from 96 % to 118 %.

Scaling up a targeted exposome LC-MS/MS biomonitoring method by incorporating veterinary drugs and pesticides

Humans are exposed to a cocktail of food-related and environmental contaminants, potentially contributing to the etiology of chronic diseases. Better characterizing the “exposome” is a challenging task and requires broad human biomonitoring (HBM). Veterinary drugs (VDs)/antibiotics, widely used and regulated in food and animal production, however, are typically not yet included in exposomics workflows. Therefore, in this work, a previously established multianalyte liquid chromatography-tandem mass spectrometry (LC-MS/MS) method covering >80 diverse xenobiotics was expanded by >40 VDs/antibiotics and pesticides. It was investigated if the generic workflow allowed for the successful integration of a high number of new analytes in a proof-of-principle study. The expanded method was successfully in-house validated and specificity, matrix effects, linearity, intra- and inter-day precision, accuracy, limits of quantification, and detection were evaluated. The optimized method demonstrated satisfactory recovery (81–120%) for most of the added analytes with acceptable RSDs (<20%) at three spiking levels. The majority of VDs/antibiotics and pesticides (69%) showed matrix effects within a range of 50–140%. Moreover, sensitivity was excellent with median LODs and LOQs of 0.10 ng/mL and 0.31 ng/mL, respectively. In total, the expanded method can be used to detect and quantify more than 120 highly diverse analytes in a single analytical run. To the best of the authors’ knowledge, this work represents the first targeted biomonitoring method integrating VDs with various other classes of pollutants including plasticizers, PFAS, bisphenols, mycotoxins, and personal care products. It demonstrates the potential to expand targeted multianalyte methods towards additional groups of potentially toxic chemicals.Graphical