Pressure Plasma Research Articles

AI-powered precursor quantification in atmospheric pressure plasma jet thin film deposition via optical emission spectroscopy

Abstract This study explores the feasibility of using Optical Emission Spectroscopy (OES) for in situ monitoring of Atmospheric Pressure Plasma Jet systems in the deposition of thin films. We identify process parameters to control film properties by machine learning for data analysis. In experiments, the depth of the carrier gas inlet pipe (pipe depth) is a crucial controllable variable that directly affects the amount of precursor, influencing the film’s thickness, sheet resistance, and resistivity. We collected 96 000 spectra while preparing 12 film samples, subsequently measured the properties of the samples, and analyzed the spectral data using Principal Component Analysis (PCA) and seven supervised machine learning models. A high correlation was found between spectral features and film thickness. We divided the spectral data in a single process based on processing time into the first third (F-third) and the last third (L-third). Using the F-third data, the PCA plot clearly indicated a significant difference between the two pipe depths, achieving a mean recognition accuracy of 95.1% with machine learning models. In contrast, using the L-third data, the PCA plot showed a high degree of overlap between the two pipe depths, resulting in a considerable decline in recognition performance. Overall, it is challenging to distinguish the spectra visually due to variations in precursor amounts and dynamic fluctuations in the OES signals, even after averaging. Nonetheless, through the successful application of machine learning, we demonstrated an effective spectral recognition system for monitoring pipe depth, which aids in the timely control of film properties.

Improving insulating film deposition stability with atmospheric pressure plasma jet by post-mixing precursor feedthrough with hollow electrode

Improving insulating film deposition stability with atmospheric pressure plasma jet by post-mixing precursor feedthrough with hollow electrode

Atmospheric pressure plasma jet interacting with a droplet on dielectric surface

Abstract The chemical processes at plasma–liquid interface has become a crucial point for plasmas’ various applications. In this study, the interaction between atmospheric pressure plasma jet and different-scale droplets were investigated by both experiments and modeling. The interaction transited from ‘annular’ mode to ‘solid’ mode when plasma involved with different size of droplets. As the droplet size increased, the high-field region moved from the plasma jet head to the gap between plasma jet head and droplet vertex surface. Additionally, the time averaged surface fluxes of the main active species were analyzed. For the flux of singlet oxygen (1O2), both small and medium-scale droplets reached the maximum value in the central region of the droplets, while for large-scale droplet, the maximum value was observed in the edge region of the droplet. This was due to the fact that, compared to small and medium-scale droplet, the edges of large-scale droplet are closer to the He–Air mixed boundary layer, where more oxygen molecules were provided in the gas environment, leading to enhanced electron collision reactions with oxygen molecules. The cause for these behaviors were also analyzed and discussed. This work shed light on the interaction mechanism for plasma–liquid interactions, which provides significant guidance for plasma medical or water treatment applications.

Enhancement of OH spectra in atmospheric pressure plasma jet by femtosecond laser

A helium (He) atmospheric pressure plasma jet (APPJ) system with a single electrode was configured. A pulsed light of femtosecond (fs) laser was irradiated at the guided streamer of He APPJ through an objective lens to generate the laser induced plasma (LIP) inside the He APPJ. The optical emission spectra of LIP were measured as the light energy of the fs laser increased. The spectra of hydroxyl molecules and atomic oxygen were enhanced when the fs laser energy exceeded 114 μJ. The plasma parameters of LIP inside the APPJ were determined using He collisional-radiative model. Electron temperature and density increased to ∼7.2 eV and 1.7×1014 cm−3, respectively. The dominant processes underlying the enhancement were discussed in the interaction of fs laser and He APPJ.

Learning-based Predictive LPV Control of Atmospheric Pressure Plasma Jets

Abstract Complexity of atmospheric pressure plasma jet dynamics poses a significant challenge for control design, and this letter presents a learning- and Scenario-based Model Predictive Control (ScMPC) method in the Linear Parameter-Varying (LPV) framework to tackle this challenge. By leveraging artificial neural networks, an LPV state-space representation of the system dynamics is first learned. The mismatch between this model and real plant is then estimated using Bayesian neural networks, enabling scenario generation for ScMPC design. Soft constraints are imposed in the control design formulation to ensure the feasibility of the underlying optimization problem. Results from extensive simulations are used to compare the proposed framework with a benchmark LTI-based ScMPC, demonstrating superior performance in both reference tracking and thermal dose delivery. The proposed approach allows for accurate control of plasma jets while reducing conservatism inherent in either LTI-based approaches or other robust control methods.

Clinical and histological study of cold physical plasma jet in treatment of full thickness skin wounds of normal and diabetic dogs.

To study the effect of physical plasma jet in treating open wounds in diabetic and non-diabetic dogs. The experimental study was conducted at the College of Veterinary Medicine, University of Baghdad, Iraq, from 20 January, 2020 to 1st May 2020, according to (no. 1364/ P.G), and comprised adult male diabetic and nondiabetic dogs. They were divided into non-diabetic group N and diabetic group D. Each group was further divided into treatment subgroup T and control subgroup C. Each dog was subjected to 4 wounds 3×3cm in size. Homemade helium non-equilibrium atmospheric pressure plasma jet therapy was used for healing purposes. Clinical parameters were evaluated by observation, while histological images were scored based on the semi-quantitative evaluation of histological sections on days 3-, 7- and 21-days post-wound. Data was analysed using SPSS Version 26 with One-way ANOVA for statistical analysis between groups and sub-groups. Of the 24 dogs, 12(50%) were in each of the two groups, which were further divided into subgroups having 6(50%) dogs each. The therapy accelerated the process of wound healing in the NT and DT subgroups compared to NC and DC. Clinical observations revealed early and complete closure of plasma-treated wounds in NT and DT subgroups started at day 30 post-wounding, while in the NC subgroup it started at day 35, and in the DC subgroup, wounds failed to close even after 35 days post-wounding. Histological analysis suggested that a plasma jet supported epithelisation, angiogenesis, formation of new hair follicles and collagen fibres, while it also controlled inflammation. In addition, in NT and DT subgroups, it increased the proliferation of fibroblasts and deposition of collagen, and there is a very, highly significant difference between groups (P<0.001), and a significant difference between days (P<0.05). Home-made helium non-equilibrium atmospheric pressure plasma jet therapy improved the quality and pace of wound healing.

Analysis of discharge parameters of an argon cold atmospheric pressure plasma jet and its impact on surface characteristics of White Grapes

An argon cold atmospheric-pressure plasma (CAP) jet operated using bipolar pulsed power supply has been characterised electro-optically and the discharge parameters are optimized. An analysis has been done on the impact of the argon CAP jet treatment on the surface properties of white grapes for different treatment time period. The developed argon CAP jet is a plasma source based on dielectric barrier discharge (DBD) that has been tuned at various input parameters including applied voltage, frequency, average power consumption, and argon flow rate. Optical Emission Spectroscopy (OES) is used to identify the generated species along with plasma parameters. The collisional–radiative (CR) model is employed to extract the electron density (ne) and electron temperature (Te) from the spectra at the optimised applied voltage of 4 kV, frequency 20 kHz and argon flow rate of 4 slpm. The OES results coupled with the CR model (ne ∼ 1014 cm−3 and Te ∼ 1 eV) and the plasma gas temperature measurement through OH (A-X) transitions (Tg ∼ 310.5 K) show the non-equilibrium nature of the argon CAP jet. A comparative analysis between untreated and treated white grapes reveals that the argon CAP jet treatment influences surface microstructure, increasing hydrophilicity (with a ∼49.3% decrease in water contact angle) along with slight changes in surface temperature (∼5 °C increase), colour (ΔE* < 1.5), and physiochemical properties such as chemical composition (no change) and Total Soluble Solid (TSS) content (∼8.3%). It is inferred that this type of CAP jet treatment of white grapes only affects the physical characteristics of the grape surface and does not alter any chemical compositions.

Fluorine-free superhydrophobic surfaces by atmospheric pressure plasma deposition of silazane-based suspensions

Atmospheric plasma is used to deposit superhydrophobic fluorine-free thin films onto a substrate. In this process, a suspension of micron size silica particles in a silazane based precursor is deposited in a single step using a dielectric barrier discharge plasma jet moving above the substrate. Thanks to an optimized configuration between the suspension injection and the plasma jet, the silazane precursor can be polymerized on the substrate surface but also, on silica particles to form additional micro size particles. The experimental parameters for optimal deposition are discussed, with emphasis on those leading to the formation of this dual roughness surface caused by the arrangement of both silica particles and particles generated from the precursor plasma polymerization. The combination of these two different length scales for the roughness leads to a decreased wettability of the coated substrate and a water contact angle larger than 150°.

Non-thermal atmospheric pressure plasma induces selective cancer cell apoptosis by modulating redox homeostasis

BackgroundAnticancer treatments aim to selectively target cancer cells without harming normal cells. While non-thermal atmospheric pressure plasma (NTAPP) has shown anticancer potential across various studies, the mechanisms behind its selective action on cancer cells remain inadequately understood. This study explores the mechanism of NTAPP-induced selective cell death and assesses its application in cancer therapy.MethodsWe treated HT1080 fibrosarcoma cells with NTAPP and assessed the intracellular levels of mitochondria-derived reactive oxygen species (ROS), mitochondrial function, and cell death mechanisms. We employed N-acetylcysteine to investigate ROS’s role in NTAPP-induced cell death. Additionally, single-cell RNA sequencing was used to compare gene expression in NTAPP-treated HT1080 cells and human normal fibroblasts (NF). Western blotting and immunofluorescence staining examined the expression and nuclear translocation of nuclear factor erythroid 2-related factor 2 (NRF2), a key antioxidant gene transcription factor. We also evaluated autophagy activity through fluorescence staining and transmission electron microscopy.ResultsNTAPP treatment increased ROS levels and induced mitochondrial dysfunction, leading to apoptosis in HT1080 cells. The involvement of ROS in selective cancer cell death was confirmed by N-acetylcysteine treatment. Distinct gene expression patterns were observed between NTAPP-treated NF and HT1080 cells, with NF showing upregulated antioxidant gene expression. Notably, NRF2 expression and nuclear translocation increased in NF but not in HT1080 cells. Furthermore, autophagy activity was significantly higher in normal cells compared to cancer cells.ConclusionsOur study demonstrates that NTAPP induces selective cell death in fibrosarcoma cells through the downregulation of the NRF2-induced ROS scavenger system and inhibition of autophagy. These findings suggest NTAPP’s potential as a cancer therapy that minimizes damage to normal cells while effectively targeting cancer cells.

Research on Solid-State Linear Transformer Driver Power Source Driving Atmospheric Pressure Plasma Jet Treatment of Epoxy Resin

The Solid-State Linear Transformer Driver (SSLTD) is a nanosecond pulse power source characterized by its fast rise time and adjustable output waveform. It can generate uniform and stable atmospheric plasma jets, which is suitable for material surface modification. In this study, a 15-stage SSLTD was designed and assembled, which can produce a stable nanosecond pulse voltage up to 15 times the amplitude of the charging voltage at high frequencies, with a rise time of approximately 10 ns. This device can be used to generate stable atmospheric pressure Ar plasma jets with an electron density in the range of 1015~1016 cm−3 and gas temperatures close to room temperature. After the modification treatment by the plasma jets, the content of the C=O groups on the surface of the epoxy resin significantly increased in the wavelength range of 1720~1740 cm−1, and its flashover resistance was noticeably enhanced. The optimal comprehensive modification effect was achieved at a charging voltage of 600 V, pulse width of 50 ns, and pulse frequency in the range of 800~1000 Hz.

Methods for atmospheric pressure plasma modification of chitosan surface to improve biocompatibility

Methods for atmospheric pressure plasma modification of chitosan surface to improve biocompatibility

Numerical simulation of He atmospheric pressure plasma jet impinging on the tilted dielectric surface

The target surface to be treated in reality is often not smooth and horizontal and may also be in different tilting angles. The treatment of the tilted dielectric surface by the atmospheric pressure plasma jet (APPJ) undoubtedly increases the complexity of surface modification. Therefore, a two-dimensional fluid model is established to reveal the internal mechanism of the interaction between the He APPJ and the tilted dielectric surface by means of numerical simulation. The distribution of the gas flow in a small angular range (0°, 3°, 5°, 8°, 10°, and 15°) is studied. In addition, the effects of the tilt angle on the jet morphology, discharge dynamic properties, and species distribution of the He APPJ are emphatically discussed. It is found that the jet morphology and parameters are no longer symmetrical under the tilted surface. With the increase in the tilt angle, the enhanced electric field in the upper surface region leads to the increase in the ionization rate and electron density here, and also accelerates the propagation speed of the jet to the dielectric surface in the atmospheric environment. Driven by the electric field force, the jet is closer to the dielectric surface, resulting in a decrease in the thickness of the cathode sheath and an increase in the surface charge density in the area to the right of the central axis. The influence of the gas flow structure leads to the shortening of the jet development distance and a decrease in the jet velocity on the upper surface. N and O also form higher fluxes on the upper surface due to the increase in the electron density.

Synergistic effects of oxidative and acid stress on bacterial membranes of Escherichia coli and Staphylococcus simulans

Oxidative stress in combination with acid stress has been shown to inactivate a wide spectrum of microorganisms, including multi-resistant bacteria. This occurs e.g. in phagolysosomes or during treatment by cold atmospheric pressure plasmas (CAP) and possibly depends on the cell membrane. We therefore explored the effects of CAP-generated reactive oxygen and nitrogen species (RONS) on bacterial growth inhibition and membranes in neutral and acidic suspensions. We observed that growth inhibition was most efficient when bacteria were treated by a mix of short and long-lived RONS in an acidic environment. Membrane packing was affected mainly upon contact with short-lived RONS, while also acidity strongly modulated packing. Under these conditions, Gram-negative bacteria displayed large potassium release while SYTOX Green influx remained marginal. Growth inhibition of Gram-negative bacteria correlated well with outer membrane (OM) permeabilization that occurred upon contact with short and/or long-lived RONS in synergy with acidity. In Gram-positive bacteria, CAP impaired membrane potential possibly through pore formation upon contact with short-lived RONS while formation of membrane protein hydroperoxides was probably involved in these effects. In summary, our study provides a wide perspective on understanding inactivation mechanisms of bacteria by RONS in combination with acidity.

A comparative study of Fibre Bragg Grating for spatially and temporally resolved gas temperature measurements in cold atmospheric pressure plasma jets

Abstract Cold atmospheric pressure plasma jets (CAP-Jet) are successfully used in medical ther-apy for healing of chronic wounds and are widely researched in inactivation of patho-gens and in assisting in cancer therapy. A crucial parameter for these plasma applica-tions is that CAP-Jets operate at temperatures that are tolerable for biological tissues. While tools characterizing the plasma's gas temperature are well developed, there are only a few methods that work with an agreeable limit of uncertainty, complexity and limited perturbation properties to accurately determine that the studied plasma jet operates at tissue tolerable temperatures at all times. In the current work, time resolved measurements of the gas temperature in the effluent of a CAP-Jet are performed using the innovative technique of a Fibre Bragg Grating (FBG), in which the temperature dynamics is measured by a shift of the FBGs resonant wavelength through its thermo-optic coefficient. Comparing with other temporal and spatial diagnostic tools such as thermocouple measurement, Schlieren imaging, and optical emission spectroscopy, we demonstrate reliable calorimetric measurements at different plasma duty cycles. The plasma source maintains tissue tolerable temperatures inside the plasma active zone with values below 35°C at 1 cm distance from the jet nozzle. The calorimetric measure-ments have revealed that the heat power dissipation in comparison to electric energy of our plasma source is at least 50%.

Using the Plasma Jet Method to Create Zinc Nanoparticles and Study Their Structural and Optical Properties as an NH3 Gas Sensor

In this work, zinc nanoparticles were prepared using the low-temperature plasma method at different times 3 min, 5 min, 7 min, 9 min, where the initial reactions of zinc lead to the formation of nanoparticles. The metal interacts with the ionized plasma under different conditions and may turn into an oxide such as exposing the sample to air and raising the temperature of the solution a few degrees as a result of high voltage and within a certain range. The atmospheric pressure plasma system acts as the cathode, while the zinc metal strip acts as the anode. A series of techniques were used, including the use of X-ray diffraction (XRD), ultraviolet-visible spectroscopy and scanning electron microscopy (FESEM). The X-ray diffraction results showed that the samples have polycrystalline structures with hexagonal and cubic structures with a time difference, and the X-ray diffraction results showed the conversion of zinc particles into zinc oxides. FESEM images reveal particle size and shape. The ZnO nanoparticles prepared by the mentioned method seem to form different nanoshapes such as starfish and mushroom nanoparticles. The UV-visible results showed that the samples had an energy gap of about 3.4 eV at a time of 3 min, and this value decreases with increasing reaction time. The appearance of zinc oxides increases gradually with the passage of time. These results provide credibility for the fabrication of ZnO nanostructures for use in future gas sensing applications, despite the inhomogeneity of particle size among ZnO particles, the sensor was also fabricated to detect nitrogen gas (NH3) with different concentrations (17.25 ppm, 46.38 ppm, 78.58 ppm). at room temperature. The ZnO sample showed the highest sensitivity (88.1%) at 7 min. The sensitivity showed different results and increased with reaction time and gas concentration. However, response and recovery time are moderate and decrease as reaction time increases.

Modification of the Surface Crystallinity of Polyphenylene Sulfide and Polyphthalamide Treated by a Pulsed-Arc Atmospheric Pressure Plasma Jet.

Atmospheric plasma jets generated from air or nitrogen using commercial sources with relatively high energy densities are commonly used for industrial applications related to surface treatments, especially to increase the wettability of polymers or to deposit thin films. The heat fluxes to which the substrates are subjected are typically in the order of 100-300 W/cm2, depending on the treatment conditions. The temperature rise in the treated polymer substrates can have critical consequences, such as a change in the surface crystallinity or even the surface degradation of the materials. In this work, we report the phase transitions of two semicrystalline industrial-grade polymer resins reinforced with glass fibers, namely polyphenylene sulfide (PPS) and polyphthalamide (PPA), subjected to plasma treatments, as well as the modeling of the associated heat transfer phenomena using COMSOL Multiphysics. Depending on the treatment time, the surface of PPS becomes more amorphous, while PPA becomes more crystalline. These results show that the thermal history of the materials must be considered when implementing surface engineering by this type of plasma discharge.

Elucidating the bacterial inactivation mechanism by argon cold atmospheric pressure plasma jet through spectroscopic and imaging techniques.

This study aims to assess the potential bacterial inactivation pathway triggered by argon (Ar) cold atmospheric pressure plasma jet (CAPJ) discharge using spectroscopic and imaging techniques. Electrical and reactive species of the Ar CAPJ discharge was characterized. The chemical composition and morphology of bacteria pre- and post-CAPJ exposure were assessed using Fourier transform infrared (FTIR), Raman micro-spectroscopy, and transmission electron microscopy (TEM). A greater than 6 log reduction of E. coli and S. aureus was achieved within 60 and 120 s of CAPJ exposure, respectively. Extremely low D- values (< 20 s) were recorded for both the isolates. The alterations in the FTIR spectra and Raman micro-spectra signals of post-CAPJ exposed bacteria revealed the degree of destruction at the molecular level, such as lipid peroxidation, protein oxidation, bond breakages, etc. Further, TEM images of exposed bacteria indicated the incurred damages on cell morphology by CAPJ reactive species. Also, the inactivation process varied for both isolates, as evidenced by the correlation between the inactivation curve and FTIR spectra. It was observed that the identified gas-phase reactive species, such as Ar I, O I, OH•, NO+, OH+, NO2-, NO3-, etc. played a significant role in bacterial inactivation. This study clearly demonstrated the effect of CAPJ exposure on bacterial cell morphology and molecular composition, illuminating potential bacterial inactivation mechanisms.

Analysis of oil accumulation mechanisms in plasma induced mutant Scenedesmus strains compared to original Scenedesmus strains

Scenedesmus sp. is a species of the Scenedesmus genus within the phylum Chlorophyta, commonly found as a planktonic algal species in freshwater and known for its rapid growth rate. This study employs room-temperature, atmospheric-pressure plasma mutagenesis for the breeding of Scenedesmus sp., utilizing transcriptomic analysis to investigate the biosynthesis mechanism of triglycerides. Further analysis of differentially expressed genes in transcriptome by measuring the macroscopic biological indicators of mutant and original algal strains. The findings of the study suggest that the mutant strain's photosynthesis has been enhanced, leading to improved light energy utilization and CO2 fixation, thereby providing more carbon storage and energy for biomass and lipid production. The intensification of glycolysis and the TCA (tricarboxylic acid) cycle results in a greater shift in carbon flux towards lipid accumulation. An elevated expression level of related enzymes in starch and protein degradation pathways may enhance acetyl CoA accumulation, facilitating a larger substrate supply for fatty acid production and thereby increasing lipid yield.

Generation of Large-Scale Plasma Jet with Excitation of Bipolar Nanosecond Pulse Voltage in Single-Spiral Electrode Configuration

In this study, a single-outer-spiral electrode with inductance of 20 μH is employed to couple the energy input of a bipolar nanosecond pulse for the purpose of generating a large-scale atmospheric pressure plasma jet. When the spiral electrode is wrapped around a plasma jet tube with a length of 35 cm, the electrical field can be optimized, resulting in a stable laminar flow field, and a plasma jet with a length and diameter larger than 14 cm and 1.2 cm can be generated. A comparative study of the bipolar and unipolar pulse excitation voltages is also conducted, showing that the maximum lengths of the plasma jet excited by a bipolar pulse voltage, positive pulse voltage, and negative are 14 cm, 10 cm, and 7 cm, respectively. The temporal and spatially resolved spectra of the plasma jets excited by both bipolar and unipolar pulses are investigated, respectively, and the main physiochemical processes of the active species and the plasma dynamics’ evolution are discussed.

Development of novel plasma process for modification of solid and liquid interfaces for high-energy-density Cu-MnOx supercapacitor electrodes

Supercapacitors are known for their fast-charging capabilities and high-power density, though their energy density is lower compared to common batteries. Modifying the interface of manganese oxide (MnOx) electrodes by incorporating copper (Cu) is a promising method to enhance the energy density of supercapacitors, though it is not yet fully implemented due to the high electrical resistance inherent to MnOx. This work addresses this challenge by incorporating copper oxide into MnOx. A custom-designed atmospheric-pressure plasma device is used to induce super-hydrophilicity in the carbon cloth substrate, thereby improving MnOx electrodeposition. The copper sulfate precursor solution is also treated with direct plasma discharge to increase the copper doping rate in MnOx. The resulting Cu-MnOx supercapacitor electrodes, with copper oxide incorporated into the material, exhibit significantly lower charge transfer resistance and impedance, indicating an improved electrolyte/electrode interface. The assembled asymmetric supercapacitor, featuring Cu-MnOx as the cathode and activated carbon as the anode, demonstrates a specific capacitance of 92.3 F/g at 1 A g-1, a power density of 700 W/kg, and an energy density of 25.13 Wh/kg. This approach is promising for developing next-generation plasma processing technologies and energy storage materials and devices, as well as easy-to-implement surface modifications for improved wettability.