Disinfection Potential Research Articles

Harnessing the photocatalytic potential of bismuth ferrite-activated carbon nanocomposite (BFO-AC) for Staphylococcus aureus decontamination under visible light.

In response to the escalating global issue of microbial contamination, this study introduces a breakthrough photocatalyst: bismuth ferrite-activated carbon (BFO-AC) for visible light-driven disinfection, specifically targeting the Gram-positive bacterium Staphylococcus aureus (S. aureus). Employing an ultrasonication method, we synthesized various BFO-AC ratios and subjected them to comprehensive characterization. Remarkably, the bismuth ferrite-activated carbon 1:1.5 ratio (BA 1:1.5) nanocomposite exhibited the narrowest band gap of 1.86 eV. Notably, BA (1:1.5) demonstrated an exceptional BET surface area of 862.99 m2/g, a remarkable improvement compared to pristine BFO with only 27.61 m2/g. Further investigation through FE-SEM unveiled the presence of BFO nanoparticles on the activated carbon surface. Crucially, the photocatalytic efficacy of BA (1:1.5) towards S. aureus reached its zenith, achieving complete inactivation in just 60 min. TEM analysis revealed severe damage and rupture of bacterial cells, affirming the potent disinfection capabilities of BA (1:1.5). This exceptional disinfection efficiency underscores the promising potential of BA (1:1.5) for the treatment of contaminated water sources. Importantly, our results underscore the enhanced photocatalytic performance with an increased content of activated carbon, suggesting a promising avenue for more effective microorganism inactivation.

Silver nanoparticles (Ag-NPs) embedded in zeolite framework: A comprehensive study on bromide removal from water, including characterization, antibacterial properties, and adsorption mechanisms

In this comprehensive study, a novel adsorbent material comprising silver nanoparticles (Ag-NPs) zeolite composite was synthesized and characterized for its efficacy in removing bromide ions from water. Fourier Transform Infrared Spectroscopy (FT-IR) and X-ray Diffraction (XRD) analyses confirmed the successful integration of Ag-NPs within the zeolite framework, ensuring structural integrity and chemical composition. Under varying operational conditions, the batch experiments consistently exhibited the zeolite with Ag-NPs as superior in bromide removal efficacy compared to zeolite alone, both achieving over 96% removal efficiency. Moreover, the adsorption kinetics aligned well with a second-order reaction model. Furthermore, column studies revealed that zeolite with Ag-NPs performed better than zeolite in maintaining efficient bromide removal over extended durations, highlighting its long-term operational potential. Thermodynamic investigations indicated the exothermic and spontaneous nature of the bromide ion adsorption process, supported by negative ΔG° values. Across temperatures ranging from 22 to 52 °C, the ΔG° values were observed to range from − 1.275 to − 0.049 kJ/mol for bromide removal using zeolite and − 1.90 to − 0.909 kJ/mol for zeolite+Ag-NPs, indicating their favorable adsorption characteristics. Furthermore, the study revealed the remarkable antimicrobial properties of the zeolite with Ag-NPs, as evidenced by a significant reduction in bacterial growth compared to pure zeolite, suggesting its dual application potential for both bromide removal and water disinfection. In conclusion, the integration of Ag-NPs into zeolite represents a promising potential for sustainable and multifunctional water treatment solutions.

Novel Antibacterial and Biocompatible Nanostructured Gels Based on One-step Synthesis as a Potential Disinfectant for Endodontic Infection Control

AimThe objective of this study was to develop nanostructured gels as biocompatible intracanal disinfectants by one-step microwave radiation-assisted synthesis. MethodsPolyvinyl alcohol (PVA) and polyvinyl pyrrolidone (PVP) were used as a support network, and polyethylene glycol (PEG) was used as a reducing agent. The gels were characterized by measuring the swelling ratio (SR) and rheological properties and by scanning electron microscopy (SEM), transmission electron microscopy (TEM) and atomic force microscopy (AFM). The antibacterial effects of each gel were evaluated against the endodontic clinical strain Enterococcus faecalis. Then, the viability of the 21-day mature multispecies bacterial biofilm was assessed using confocal microscopy in an ex vivo model, where the biofilm was exposed to the mix of nanogels. The cell proliferation, viability, and morphology of human periodontal ligament (HPDL) cells were quantified using a real-time IncuCyte® S3 Live-Cell System. Viability was measured by confocal microscopy using an ex vivo model exposing a 21-day mature multispecies bacterial biofilm to the mix of nanogels. ResultsThe antibacterial activity of the gels coincided with the superficial characterization and the solubility of the gel in the growth medium. Gels with higher viscosity (327.85-980.58 Pa s), higher dissolution (42-70%SR), and lower porosity (no porosity and 611.63 nm) showed excellent antibacterial activity against E. faecalis. Despite their physicochemical characteristics, CuNPs gels showed greater effectiveness against E. faecalis.These nanostructured gels with high PVA concentrations promote HPDL cells proliferation while still exerting antibacterial properties. Mix of nanogels showed an increase non-viable cells biomass from at of application. ConclusionsThe use of biocompatible polymers influences the physicochemical, bactericidal, and cytotoxic response, making these materials potential disinfectant agents against resistant bacteria with good biocompatibility and improved HPDL cells proliferation.

Efficacy of combined disinfection with a nitric oxide donor in controlling biofilm formation on the reverse osmosis water pathway for hemodialysis.

The water treatment system for hemodialysis (HD) is used to treat multiple patients requiring HD simultaneously. This system requires a large amount of purified reverse osmosis (RO) water. However, a major drawback of this method is the formation of biofilms in dialysate pathways. The purpose of this study was to investigate the efficacy of NOC 18, a nitric oxide (NO) donor that can be used at neutral pH, in disinfecting the RO water pathway. Silicone tubes were obtained from the terminal sites of two different HD units. The biofilm coverage and mean biofilm thickness on the tube lumen were evaluated by scanning electron microscopy. The results demonstrated that treatment with NOC 18 alone and in conjunction with sodium hypochlorite reduced biofilm coverage and mean biofilm thickness. Thus, NO donor is a potential disinfectant that enhances bacterial dispersion from biofilms formed on the silicone tube lumen and reduces biofilm coverage and thickness on the RO water pathway at neutral pH. Furthermore, combined disinfection with the NO donor and sodium hypochlorite might enhance biofilmremoval efficacy in clinical practice.

Pharmaceuticals Removal by Ozone and Electro-Oxidation in Combination with Biological Treatment

This study investigated the efficiency of two advanced oxidation processes (AOPs), ozonation (O3), and electrochemical oxidation (EO), applied individually or in combination, in the removal of contaminants of emerging concern (CECs) contained in hospital wastewaters, focusing on pharmaceuticals. The optimisation of the single technologies was performed using synthetic wastewater composed of four refractory pharmaceuticals, (carbamazepine-CBZ, lorazepam-LZP, ketoprofen-KTP, 10,11-epoxicarbamazepine-E-CBZ), first alone and then in mixture, in an initial concentration of 1 mg L−1 each. Once the best operational conditions for EO and O3 were defined, their combination (both simultaneous and sequential) was evaluated for the mixture of the selected pharmaceuticals. The treatment solution that showed the best performance was the simultaneous combination of O3 and EO. This treatment was validated using real hospital wastewater previously treated through a moving bed biofilm reactor (MBBR), evaluating its viability by testing the toxicity of the final effluent via Vibrio fischeri inhibition tests. The obtained results showed that the simultaneous combination of O3 and EO as the polishing step after a biological treatment is a very promising solution for hospital wastewater treatment, allowing for obtaining a non-toxic effluent and full degradation of refractory compounds. The disinfection potential of the proposed AOP was also assessed by determining Escherichia coli inactivation potential.

Synthesis and Characterization of Dental Nanocomposite Resins Reinforced with Dual Organomodified Silica/Clay Nanofiller Systems.

Quaternary ammonium (QA) compounds have been widely studied as potential disinfectants in dental restorative materials. The present work investigates whether the gradual displacement of nanosilica by QA-clay nanoparticles may have an impact on the physicochemical and mechanical properties of dental nanocomposite resins. For this purpose, Bis-GMA/TEGDMA-based composite resins were initially synthesized by incorporating 3-(trimethoxysilyl)propyl methacrylate (γ-MPS)-modified nanosilica/QA-clay nanoparticles at 60/0, 55/5, 50/10, 40/20, and 30/30 wt% filler loadings. Their structural characterization was performed by means of scanning electron microscopy (SEM) and X-ray diffraction analysis (XRD). The degree of double bond conversion (DC) over time and the polymerization shrinkage were determined with Fourier transform infrared spectroscopy (FTIR) and a linear variable displacement transducer (LVDT), respectively. Mechanical properties as well as water sorption and solubility parameters were also evaluated after storage of nanocomposites in water for 7 days at 37 °C. Spectral data revealed intercalated clay configurations along with areas characterized by silica-clay clusters for clay loadings up to 30 wt%. Furthermore, the insertion of 10 wt% QA-clay enhanced the auto-acceleration effect also sustaining the ultimate (DC), reduced the setting contraction and solubility, and, finally, yielded flexural modulus and strength very close to those of the control nanocomposite resin. The acquired results could herald the advanced design of dental restorative materials appropriate for contemporary clinical applications.

Engineered multi-walled carbon nanotubes for disinfecting wastewater

Discharging a considerable amount of untreated effluent directly into a water body significantly impacts water quality. Contaminated water can spread waterborne infections, resulting in exponentially high death rates worldwide. Although carbon nanotubes are frequently employed in industry, little is understood about how they may affect aquatic microbial ecosystems. Therefore, the present investigation aimed to exploit multi-walled carbon nanotubes (MWCNTs) as a potential disinfectant to eliminate waterborne bacteria during wastewater treatment. The current study utilized six different microbial strains, including Escherichia coli O157, Salmonella enterica, Staphylococcus aureus, Enterococcus faecalis, Risopus oryzae, and Rhizomucor miehei, to examine the antimicrobial properties of MWCNTs. The physical and morphological properties of MWCNTs were characterized using transmission electron microscope (TEM), scanning electron microscope (SEM), X-ray diffraction (XRD), Fourier-transform infrared spectroscopy (FTIR), Dynamic light scattering (DLS), and zeta potential. The FTIR spectra of MWCNTs have appeared at 11,029 cm−1, and the zeta potential and particle size recorded at −28.89 mV and 425 nm, respectively. On the other hand, the results indicated that the width of the inhibition zone varied between 11 and 29 mm for E. coli O157, 11–31 mm for S. enterica, 16–37 mm for S. aureus, 14–34 mm for E.faecalis, 10–26 mm for R. oryzae, and 10–24 mm for Rh. miehei. The reduction rate of disinfection was estimated. The effective dose of MWCNTs (4xMIC) in a disinfection experiment could all selectedpathogens after 125 min exposure time. This study provided an overview of the antimicrobial properties of MWCNTs, their multiple modes of action against pathogens, and their usefulness in wastewater disinfection and microbial control. Thus, this current research work can also recommend MWCNTs as a good solution and beneficial disinfecting agent for inactivating waterborne pathogens within wastewater handling.

Immersion of debrided diabetic foot ulcer tissue in electrochemically generated pH neutral hypochlorous acid significantly reduces the microbial bioburden: whole-genome sequencing of Staphylococcus aureus, the most prevalent species recovered

Diabetic foot ulcer infections (DFUIs) are the leading cause of lower-limb amputations, mediated predominantly by Staphylococcus aureus. pH-neutral electrochemically generated hypochlorous acid (anolyte) is a non-toxic, microbiocidal agent with significant potential for wound disinfection. To investigate both the effectiveness of anolyte for microbial bioburden reduction in debrided ulcer tissues and the population of resident S.aureus. Fifty-one debrided tissues from 30 people with type II diabetes were aliquoted by wet weight and immersed in 1- or 10-mL volumes of anolyte (200parts per million) or saline for 3min. Microbial loads recovered were determined in colony forming units/g (cfu/g) of tissue following aerobic, anaerobic and staphylococcal-selective culture. Bacterial species were identified and 50S.aureus isolates from 30 tissues underwent whole-genome sequencing (WGS). The ulcers were predominantly superficial, lacking signs of infection (39/51, 76.5%). Of the 42/51 saline-treated tissues yielding ≥105cfu/g, a microbial threshold reported to impede wound-healing, only 4/42 (9.5%) were clinically diagnosed DFUIs. Microbial loads from anolyte-treated tissues were significantly lower than saline-treated tissues using 1mL (1065-fold, 2.0 log) and 10mL (8216-fold, 2.1 log) immersion volumes (P<0.0005). S.aureus was the predominant species recovered (44/51, 86.3%) and 50 isolates underwent WGS. All were meticillin susceptible and comprised 12 sequence types (STs), predominantly ST1, ST5 and ST15. Whole-genome multi-locus sequence typing identified three clusters of closely related isolates from 10 patients indicating inter-patient transmission. Short immersions of debrided ulcer tissue in anolyte significantly reduced microbial bioburden: a potential novel DFUI treatment.

Microbiological Profile of Primary Teeth with Irreversible Pulpitis and Pulp Necrosis with/without Abscess and their Susceptibility to Three Antibiotics as Intracanal Medication.

The ineffective disinfection potential of conventional intracanal medicaments to eliminate enteropathogens from root canal systems leads to their persistence contributing to endodontic treatment failures. Hence, the use of appropriate intracanal medicament becomes the essential phase to accomplishing comprehensive decontamination of the root canal system. When applied topically as an intracanal medicament, antibiotics eradicate residual microorganisms from tortuous endodontic spaces, minimizing the risk of systemic toxicity. To evaluate the prevalence of various bacterial species associated with signs of irreversible pulpitis and pulp necrosis with/without abscess in primary teeth root canals and their susceptibility against three antimicrobial agents. The pulp tissue and organic debris were retrieved from deciduous teeth (n = 50) from children between the age of 3-10 years and cultured. The bacterial identification and antibacterial profiling of isolated bacteria were done against clindamycin, metronidazole, and doxycycline through minimum inhibitory concentration (MIC) and minimum bactericidal concentration (MBC) assay. The MIC and MBC of each antibiotic were expressed as mean ± standard deviation (SD), range, and standard error (SE of the mean). The intergroup comparisons were done by the Kruskal-Wallis test, while intragroup pair-wise comparisons were done using the Wilcoxon signed-rank test. The confidence level will be set at 95%. Aerobic bacteria were found in 54%, microaerophilic bacteria in 76%, facultative anaerobes in 26%, and obligatory anaerobes were isolated from 30% of teeth. The intragroup and intergroup comparisons of test agent MIC revealed a nonsignificant difference (p > 0.05). The intragroup MBC comparisons of all the test agents revealed statistically nonsignificant (p > 0.05), while intergroup comparisons demonstrated nonsignificant (p > 0.05) to highly significant difference (p < 0.001). Clindamycin demonstrated promising antibacterial activity against most of the isolated bacteria, while against metronidazole and doxycycline, most of the bacteria were moderate to highly resistant. Determining the antibacterial agents' efficacy along with modifications can help to target maximum pathogenic microbes and reduce catastrophic endodontic therapy failures. Dahake PT, Kothari S. Microbiological Profile of Primary Teeth with Irreversible Pulpitis and Pulp Necrosis with/without Abscess and their Susceptibility to Three Antibiotics as Intracanal Medication. Int J Clin Pediatr Dent 2023;16(2):312-320.

Advanced oxidation processes for pharmaceutical degradation and disinfection of wastewater: peracetic acid and graphene oxide quantum dots

A combination of graphene oxide quantum dots and peracetic acid (GQDs/PAA) was used to degrade sulfasalazine in municipal wastewater. The impact of reaction parameters such as initial concentrations of oxidant (peracetic acid) and drug (sulfasalazine) and different water matrices was evaluated. The degradation efficiency when using GQDs/PAA (50 mg/L: 0.10 mM) was almost 100% in synthetic water and 80% in municipal wastewater. The primary reactive radicals that caused the degradation of sulfasalazine in wastewater were identified as hydroxy (·OH) as well as the peroxy radicals (CH3C(=O)OO·, CH3C(=O)O·). 83.7% of total organic carbon were eliminated when 0.15 mM PAA was used while nearly 100% degradation of SZZ was achieved. A degradation pathway was proposed using the degradation intermediates obtained on quadrupole time-of-flight liquid chromatography mass spectrometry. The genotoxic and mutagenic potential of the degradation products formed during the degradation of sulfasalazine was assessed using the Ames test. It was demonstrated that none of the intermediates were mutagenic. GQDs/PAA was further tested as a potential disinfectant, and S. aureus was completely inactivated as verified by using LIVE/DEAD Baclight staining. In raw municipal wastewater, GQDs/PAA eliminated more than 90% of bacteria, thus confirming the synergy of GQDs/PAA as both a disinfectant and a photocatalyst.

Preparation of βCD‐AC functionalized ZnO/ZnSe for photocatalytic degradation of organic dye wastewater

Conventional photocatalysts for degrading pollutants are limited because of the rapid recombination of electron–hole pair, difficulty in separation and recovery, and low efficiency in utilizing the visible light. To improve the adsorption capacity of the photocatalyst and reduce electron–hole recombination rate, βCD was anchored onto the porous activated carbon (AC) and then combined with ZnO/ZnSe to prepare βCD‐AC‐ZnO/ZnSe. The ZnO was a quasi‐hexahedron shape in the ZnO/ZnSe heterojunction and was tightly integrated with the βCD‐AC, which could improve the transfer ability of the photogenerated carrier. Considering the synergistic effect of βCD‐AC and ZnO/ZnSe, the UV absorption edge was red shifted, and the lifetime of the electrons–hole pairs was prolonged. Thus, the photocatalytic degradation ration of βCD‐AC‐ZnO/ZnSe reached 82% under visible light, which was about 1.8 and 4.2 times higher than those of the virgin heterojunction and AC‐ZnO/ZnSe, respectively. βCD‐AC‐ZnO/ZnSe exhibited excellent disinfection potential that 3.5 log Escherichia coli cells were killed for 120 min. The high‐efficiency visible‐light photocatalytic performance was demonstrated, and the •O2− played a main active role in the photocatalytic removal of pollutants. The present research provided a valuable route for the fabrication of photocatalyst for real‐world applications.

Atom Economical QPCs: Phenyl-Free Biscationic Quaternary Phosphonium Compounds as Potent Disinfectants.

Quaternary ammonium compounds (QACs) are vital disinfectants for the neutralization of pathogenic bacteria in clinical, domestic, and commercial settings. After decades of dependence on QACs, the emergence of antimicrobial resistance to this class of compounds threatens the ability of existing QAC products to effectively manage rising bacterial threats. The need for new disinfectants is therefore urgent, with quaternary phosphonium compounds (QPCs) emerging as a new class of promising antimicrobials that boast significant activity against highly resistant bacteria. Reported here is a series of twenty-one novel QPCs that replace phenyl substituents on the phosphorus center with alkyl groups yet allow for rapid synthetic routes in high yields. Within this series are structures containing methyl, ethyl, or cyclohexyl phosphonium substituents on bisphosphane scaffolds bearing ethyl linkers, affording atom economical structures and ones that represent exact analogs to nitrogenous amphiphiles. The resultant bisQPC structures display high antibacterial efficacy enjoyed by comparably constructed QACs, with three structures in the single-digit micromolar activity range despite structural simplification.

Enhanced inactivation of Escherichia coli by ultrasound combined with peracetic acid during water disinfection

Peracetic acid (PAA) is a desirable disinfectant for municipal wastewater because of its potent disinfection performance and limited toxic by-products. This study explored the efficiency and mechanism of Escherichia coli inactivation by PAA combined with ultrasound simultaneously (ultrasound + PAA) or (ultrasound → PAA) sequentially. The result showed that 60 kHz ultrasound combined with PAA sequentially (60 kHz → PAA) had excellent inactivation performance on E. coli, up to 4.69-log10. The result also showed that the increase of pH and humic acid concentration in solution significantly reduced the inactivation efficiency of 60 kHz → PAA treatment. We also observed that the increase of temperature was beneficial to the disinfection, while anions (Cl−; HCO3−) had little effect. With 60 kHz → PAA, the PAA and the synergism between PAA and ultrasound played major contribution to the inactivation, which we assumed might be due to both the diffusion of PAA into the cells and the damage to the cytomembrane by ultrasound, as evidenced through the laser confocal microscopy (LSCM), scanning electron microscope (SEM) and transmission electron microscope (TEM). The inactivation mechanism involved the destruction of cell membrane and loss of intracellular material. Empirically, 60 kHz → PAA was found to be effective for the inactivation of E. coli in actual wastewater, and the regrowth potential of E. coli treated by 60 kHz → PAA was significantly lower than that treated only by PAA.

Antimicrobial and Antibiofilm Effect of Commonly Used Disinfectants on Salmonella Infantis Isolates.

Salmonella enterica subsp. enterica serovar Infantis is the most prevalent serovar in broilers and broiler meat in the European Union. The aim of our study was to test the biofilm formation and antimicrobial effect of disinfectants on genetically characterized S. Infantis isolates from poultry, food, and humans. For the biofilm formation under various temperature conditions (8 °C, 20 °C, and 28 °C) and incubation times (72 h and 168 h), the crystal violet staining method was used. The evaluation of the in vitro antimicrobial effect of Ecocid® S, ethanol, and hydrogen peroxide was determined using the broth microdilution method. The antibiofilm effect of subinhibitory concentration (1/8 MIC) of disinfectants was then tested on S. Infantis 323/19 strain that had the highest biofilm formation potential. Our results showed that the biofilm formation was strain-specific; however, it was higher at 20 °C and prolonged incubation time. Moreover, strains carrying a pESI plasmid showed higher biofilm formation potential. The antibiofilm potential of disinfectants on S. Infantis 323/19 strain at 20 °C was effective after a shorter incubation time. As shown in our study, more effective precautionary measures should be implemented to ensure biofilm prevention and removal in order to control the S. Infantis occurrence.

Comparative Study of Blue Light with Ultraviolet (UVC) Radiation on Betacoronavirus 1

The ongoing coronavirus pandemic requires more effective disinfection methods. Disinfection using ultraviolet light (UV), especially longer UVC wavelengths, such as 254 and 270/280 nm, has been proven to have virucidal properties, but its adverse effects on human skin and eyes limit its use to enclosed, unoccupied spaces. Several studies have shown the effectiveness of blue light (405 nm) against bacteria and fungi, but the virucidal property at 405 nm has not been much investigated. Based on previous studies, visible light mediates inactivation by absorbing the porphyrins and reacting with oxygen to produce reactive oxygen species (ROS). This causes oxidative damage to biomolecules, such as proteins, lipids, and nucleic acids, essential constituents of any virus. The virucidal potential of visible light has been speculated because the virus lacks porphyrins. This study demonstrated porphyrin-independent viral inactivation and conducted a comparative analysis of the effectiveness at 405 nm against other UVC wavelengths. The betacoronavirus 1 (strain OC43) was exposed to 405, 270/280, 254, and 222 nm, and its efficacy was determined using a median tissue culture infectious dose, i.e., TCID50. The results support the disinfection potential of visible light technology by providing a quantitative effect that can serve as the basic groundwork for future visible light inactivation technologies. In the future, blue light technology usage can be widened to hospitals, public places, aircraft cabins, and/or infectious laboratories for disinfection purposes.

A resource-efficient and portable nanotechnology-enabled disinfection system: Performance studies and a novel strategy to recycle spent material

The paper describes developing a point-of-use disinfection system consisting of a film-forming nanocomposite packed in a nylon sachet. The composite film consists of silver nanoparticles embedded in a matrix containing chitosan, reduced graphene oxide, and tannic acid. The long-term ability of the portable sachet bag to release silver ions and disinfect surface and groundwater is demonstrated. The sachet bag's disinfection potential is demonstrated by taking Escherichia coli MTCC 443 as the model microorganism. The system produced a complete and consistent 3 log10 reduction of E. coli over multiple cycles of use. The paper also describes a green recycling approach to utilise spent composite film and prevent AgNPs from entering the waste stream. The spent nanocomposite film is transformed into a concrete micro-crack sealant through a soft chemical route. The sealant's ability to plug micro-cracks in concrete is demonstrated, and the mechanism of sealant interaction with concrete is proposed. The sealant can fill cracks and solidify in an alkaline environment. The concrete cube specimens repaired with sealant showed enhanced compressive strength compared to the residual concrete cube specimens. The possible leaching of residual silver from the sealant in concrete is investigated via toxicity characteristic leaching procedure analysis. The study demonstrates that silver leaching is negligible (< 0.05 mg/L) and well below the permissible limit of 5 mg/L.

A novel long-acting antimicrobial nanomicelle spray.

Contaminated surfaces play a major role in disease transmission to humans. The vast majority of commercial disinfectants provide short-term protection of surfaces against microbial contamination. The Covid-19 pandemic has attracted attention to the importance of long-term disinfectants as they would reduce the need for staff and save time. In this study, nanoemulsions and nanomicelles containing a combination of benzalkonium chloride (BKC; a potent disinfectant and a surfactant) and benzoyl peroxide (BPO; a stable form of peroxide that is activated upon contact with lipid/membranous material) were formulated. The prepared nanoemulsion and nanomicelle formulas were of small sizes <80 nm and high positive charge >45 mV. They showed enhanced stability and prolonged antimicrobial efficacy. The antibacterial potency was evaluated in terms of long-term disinfection on surfaces as verified by repeated bacterial inoculums. Additionally, the efficacy of killing bacteria upon contact was also investigated. A nanomicelle formula (NM-3) consisting of 0.8% BPO in acetone and 2% BKC plus 1% TX-100 in distilled water (1 : 5 volume ratio) demonstrated overall surface protection over a period of 7 weeks upon a single spray application. Furthermore, its antiviral activity was tested by the embryo chick development assay. The prepared NM-3 nanoformula spray showed strong antibacterial activities against Pseudomonas aeruginosa, Escherichia coli, and Staphylococcus aureus as well as antiviral activities against infectious bronchitis virus due to the dual effects of BKC and BPO. The prepared NM-3 spray shows great potential as an effective solution for prolonged surface protection against multiple pathogens.

Comparative in vitro study of the disinfectant potential of three substances used in endodontics

To ensure the cleaning and sanitization of the root canal system during mechanical and chemical preparation, potentiation by physical agents is important. The literature shows that an average of 35% to 53% of the canal walls remain untouched, exposing the limitations of mechanical instruments and emphasizing the importance of chemical substances for chemical-surgical preparation and tubular decontamination. The aim of the present study was to analyze the disinfecting capacity of three chemical substances used in endodontic treatment on an aggressive species of microorganism. The methodology applied was an experimental laboratory study to compare the antimicrobial potential of 1% Sodium Hypochlorite, 2% Chlorhexidine and 17% Silver Nanoparticle, used in endodontics against the pathogen E. Faecalis, selected from the microorganism bank of the laboratory of Molecular and Clinical Microbiology of the Graduate Program in Health Sciences at and whose storage and use was previously authorized by the Research Ethics Committee of the São Francisco University. After collecting data, it was possible to check the results and conclude that the 2% chlorhexidine solution presented the best results in terms of antimicrobial efficacy compared to the 1% sodium hypochlorite solution, followed by the silver nanoparticles at 17%. The latter was not able to form a growth inhibition halo against E.faecalis in vitro.

Direct Inhibition of SARS-CoV-2 Spike Protein by Peracetic Acid.

Peracetic acid (PAA) disinfectants are effective against a wide range of pathogenic microorganisms, including bacteria, fungi, and viruses. Several studies have shown the efficacy of PAA against severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2); however, its efficacy in SARS-CoV-2 variants and the molecular mechanism of action of PAA against SARS-CoV-2 have not been investigated. SARS-CoV-2 infection depends on the recognition and binding of the cell receptor angiotensin-converting enzyme 2 (ACE2) via the receptor-binding domain (RBD) of the spike protein. Here, we demonstrated that PAA effectively suppressed pseudotyped virus infection in the Wuhan type and variants, including Delta and Omicron. Similarly, PAA reduced the authentic viral load of SARS-CoV-2. Computational analysis suggested that the hydroxyl radicals produced by PAA cleave the disulfide bridges in the RBD. Additionally, the PAA treatment decreased the abundance of the Wuhan- and variant-type spike proteins. Enzyme-linked immunosorbent assay showed direct inhibition of RBD-ACE2 interactions by PAA. In conclusion, the PAA treatment suppressed SARS-CoV-2 infection, which was dependent on the inhibition of the interaction between the spike RBD and ACE2 by inducing spike protein destabilization. Our findings provide evidence of a potent disinfection strategy against SARS-CoV-2.

Electrolyzed water for the microbiologic control in the pandemic dental setting: a systematic review.

Electrolyzed water has brought recent attention due to its antimicrobial properties. Indeed, electrolyzed water has been proposed to sterilize dental materials and instruments without compromising their structural integrity. In addition, electrolyzed water has been proposed as a mouthwash to control bacterial and viral oral infections without detrimental effects on the oral mucosa. However, no current consensus or evidence synthesis could indicate its potentially favorable use in the dental setting, particularly during the COVID-19 context. Therefore, this systematic review aimed to elucidate whether electrolyzed water could improve microbiologic control in the COVID-19 pandemic dental setting. MEDLINE via Pubmed, EMBASE, Cochrane's CENTRAL, Scopus, LILACS, and Web of Science databases were searched up to September 2021 to identify experimental studies utilizing electrolyzed water for eliminating microorganisms in a dental setting. Besides, a manual and a grey literature search were performed. The data selection and extraction were performed individually and in duplicate. The Risk of Bias (RoB) was assessed with the Nature Publication Quality Improvement Project (NPQIP) score sheet. The study protocol was registered at PROSPERO CRD42020206986. From a total of 299 articles, 63 studies met the inclusion criteria. The included studies assessed several types of electrolyzed waters, which showed a high disinfection potential when used to deal with different oral conditions. Electrolyzed water demonstrated a broad antimicrobial spectrum and was highly efficient in the dental office disinfection against viruses, fungi, and bacteria, being compatible with most dental materials. In addition, electrolyzed water could protect against SARS-CoV-2 infection and contamination in the dental office. Regarding the RoB, only 35.18% of entries were answered as 'Yes', thus achieving less than half of the reporting sheet. Electrolyzed water effectively disinfects contaminated surfaces, dental materials, and equipment. Therefore, their use is recommendable in the SARS-CoV-2 pandemic dental setting.