Position Displacement Research Articles

Role of Dynamic 3 Tesla MRI in the Evaluation of Temporomandibular Joint Dysfunction.

The internal derangement of the temporomandibular joint (TMJ) is the most common type of dysfunction. Internal derangement can be divided into anterior and posterior disc displacement. Anterior disc displacement is the most common type, which is further classified into anterior disc displacement with reduction (ADDWR) and without reduction (ADDWoR). Temporomandibular joint dysfunction (TMD) symptoms are pain, reduced mouth opening, and joint sound. The main aim of this study was to correlate the clinical findings and magnetic resonance imaging (MRI) diagnosis of TMD in symptomatic and asymptomatic TMJs. This prospective observational study was conducted in a tertiary care hospital on a 3T Philips Achieva MRI machine with 16-array channel coils after obtaining approval from the institutional ethical committee. A total of 60 TMJs of 30 patients were included in the study. After the clinical examination of each patient, an MRI of both right and left TMJs was done. In patients with unilateral TMD, the asymptomatic side was used as the asymptomatic joint, and the affected side as the symptomatic joint. Asymptomatic patients without any symptoms of TMD were used as controls for bilateral TMD cases. MRI with high-resolution specific serial sections was obtained in both open- and closed-mouth positions. A p-value of <0.05 was considered a statistically significant agreement between clinical and MRI diagnoses of internal derangement. Out of a total of 30 clinically asymptomatic TMJs, only 23 were normal on MRI. On MRI, 26 TMJs showed ADDWRand 11 showed ADDWoR. The most common shape of the disc was biconcave and the displacement was anterior in symptomatic joints. The most common type of articular eminence shape was sigmoid in ADDWR and flattened in ADDWoR. Agreement between clinical and MRI diagnosis in this study was 87.5% (p < 0.001). The study concluded substantial agreement between clinical and MRI diagnosis of TMJ internal dysfunction and suggests that the diagnosis of the internal dysfunction can be made clinically but the exact position, shape, and type of disc displacement can be assessed precisely with the help of MRI.

Hirayama Disease: A Case Report

Hirayama disease is a rare non-progressive spinal muscular atrophy related to flexion movements of the neck. It is considered a benign motor neuron disorder with a stationary stage after a progressive course. We report a case of an 18-years old male with a history of asymmetric weakness and amyotrophy of the distal right upper extremity, suggestive of Hirayama disease. Magnetic resonance imaging (MRI) of the cervical spine was obtained both in flexion and neutral position. MRI showed loss of cervical lordosis with focal areas of lower cervical cord atrophy with increased T2 signal intensity of the spinal cervical cord in a neutral position and anterior displacement of the detached posterior dura from the underlying flexion position.

Improvement of Electromagnetic Side-Channel Information Measurement Platform

Research has shown that when a microcontroller (MCU) is powered up, the emitted electromagnetic radiation (EMR) patterns are different depending on the executed instructions. This becomes a security concern for embedded systems or the Internet of Things. Currently, the accuracy of EMR pattern recognition is low. Thus, a better understanding of such issues should be conducted. In this paper, a new platform is proposed to improve EMR measurement and pattern recognition. The improvements include more seamless hardware and software interaction, higher automation control, higher sampling rate, and fewer positional displacement alignments. This new platform improves the performance of previously proposed architecture and methodology and only focuses on the platform part improvements, while the other parts remain the same. The new platform can measure EMR patterns for neural network (NN) analysis. It also improves the measurement flexibility from simple MCUs to field programmable gate array intellectual properties (FPGA-IPs). In this paper, two DUTs (one MCU and one FPGA-MCU-IP) are tested. Under the same data acquisition and data processing procedures with similar NN architectures, the top1 EMR identification accuracy of MCU is improved. The EMR identification of FPGA-IP is the first to be identified to the authors' knowledge. Thus, the proposed method can be applied to different embedded system architectures for system-level security verification. This study can improve the knowledge of the relationships between EMR pattern recognitions and embedded system security issues.

The Resonance Raman Spectrum of Cytosine in Water: Analysis of the Effect of Specific Solute-Solvent Interactions and Non-Adiabatic Couplings.

In this contribution, we report a computational study of the vibrational Resonance Raman (vRR) spectra of cytosine in water, on the grounds of potential energy surfaces (PES) computed by time-dependent density functional theory (TD-DFT) and CAM-B3LYP and PBE0 functionals. Cytosine is interesting because it is characterized by several close-lying and coupled electronic states, challenging the approach commonly used to compute the vRR for systems where the excitation frequency is in quasi-resonance with a single state. We adopt two recently developed time-dependent approaches, based either on quantum dynamical numerical propagations of vibronic wavepackets on coupled PES or on analytical correlation functions for cases in which inter-state couplings were neglected. In this way, we compute the vRR spectra, considering the quasi-resonance with the eight lowest-energy excited states, disentangling the role of their inter-state couplings from the mere interference of their different contributions to the transition polarizability. We show that these effects are only moderate in the excitation energy range explored by experiments, where the spectral patterns can be rationalized from the simple analysis of displacements of the equilibrium positions along the different states. Conversely, at higher energies, interference and inter-state couplings play a major role, and the adoption of a fully non-adiabatic approach is strongly recommended. We also investigate the effect of specific solute-solvent interactions on the vRR spectra, by considering a cluster of cytosine, hydrogen-bonded by six water molecules, and embedded in a polarizable continuum. We show that their inclusion remarkably improves the agreement with the experiments, mainly altering the composition of the normal modes, in terms of internal valence coordinates. We also document cases, mostly for low-frequency modes, in which a cluster model is not sufficient, and more elaborate mixed quantum classical approaches, in explicit solvent models, need to be applied.

Du Bois Between Two Worlds: The Magical Sources of The Souls of Black Folk

Abstract: This essay explores W. E. B. Du Bois’s use of magical sources in his 1903 book The Souls of Black Folk . I argue that Du Bois’s metaphor of the ‘Veil’ refers directly to Black magical traditions, or Conjure, alongside to the scriptural, literary, and philosophical allusions that Du Bois weaves throughout the metaphor of the Veil in Souls . Du Bois had the Conjurer in mind when he described the Black subject in America as a “seventh son, born with a veil, and gifted with second-sight in this American world.” I argue that Du Bois turns to Conjure for the Conjurer’s unique position of ontological displacement, social precarity, and special insight. Like the Conjurer, Du Bois’s Veiled subject exists between two worlds.

Medial sesamoid position in moderate to severe hallux valgus: Correlation between three radiographic measurements

BackgroundIn hallux valgus surgery, it is essential to accurately assess the position of the sesamoids both pre- and postoperatively. Weight-bearing foot anteroposterior, tangential sesamoid, and semi-weight-bearing computed tomography axial views are radiographic methods used to assess the medial sesamoid position. This study aimed to measure the medial sesamoid position and evaluate the correlation between these three radiographic methods. MethodsThis retrospective study comprised 59 feet from 49 patients who underwent hallux valgus surgery. The mean age of patients was 54.6 (range, 22–70) years. We took preoperative and postoperative measurements using the weight-bearing anteroposterior, tangential sesamoid, and semi-weight-bearing computed tomography axial views to assess the medial sesamoid position. ResultsThe mean grades of the medial sesamoid position preoperatively and 6 months postoperatively were 2.5 and 0.8, 1.6 and 0.4, and 1.3 and 0.3 points based on the anteroposterior, tangential sesamoid, and computed tomography axial views, respectively (P < 0.001). Preoperatively, there was a strong positive correlation between the computed tomography axial and tangential sesamoid views (P < 0.001, r = 0.645) and anteroposterior and computed tomography axial views (P < 0.001, r = 0.468). In contrast, the tangential sesamoid and anteroposterior views showed a weak positive correlation (P = 0.03, r = 0.283). Six months postoperatively, there was a positive correlation between the computed tomography axial and tangential sesamoid views (P < 0.001, r = 0.473), anteroposterior and computed tomography axial views (P < 0.001, r = 0.470), and tangential sesamoid and anteroposterior views (P < 0.001, r = 0.480). ConclusionsWe observed that the anteroposterior view exhibited a higher degree of medial sesamoid position displacement than the computed tomography axial and tangential sesamoid views. For the preoperative evaluation of the medial sesamoid position, the correlation between the computed tomography axial and tangential sesamoid views was stronger than that between the tangential sesamoid and anteroposterior views. However, all three views showed strong correlations postoperatively.

Telemetry and Accelerometer Tracking of Green Toads in an Urban Habitat: Methodological Notes and Preliminary Findings.

Advancements in tracking technologies provide an increasingly important tool in animal monitoring and conservation that can describe animal spatial behavior in native habitats and uncover migratory routes that otherwise may be difficult or impossible to map. In addition, high-resolution accelerometer sensors provide powerful insights into animal activity patterns and can help to identify specific behaviors from accelerometer profiles alone. Previously, such accelerometers were restricted to larger animals due to size and mass constraints. However, recent advances make it possible to use such devices on smaller animals such as the European green toad (Bufotes viridis), the focus of our current study. We deploy custom made tracking devices, that consist of very-high-frequency transmitters and tri-axial accelerometers, to track toads in their native urban environment in Vienna (Austria). A total of nine toads were tracked, ranging from three to nine tracking days per individual during the post-breeding season period. We demonstrate that our devices could reliably monitor toad movement and activity during the observation period. Hence, we confirmed the predominantly nocturnal activity patterns and recorded low overall movement at this urban site. Accelerometer data revealed that toads exhibited brief but intense activity bursts between 10 pm and midnight, resting periods during the night and intermittent activity during the day. Positional tracking alone would have missed the major activity events as they rarely resulted in large positional displacements. This underscores the importance of and value in integrating multiple tracking sensors for studies of movement ecology. Our approach could be adapted for other amphibians or other animals with mass constraints and may become standard monitoring equipment in the near future.

Evaluation of the four-dimensional motion of lung tumors during end-exhalation breath-hold conditions using volumetric cine computed tomography images

Background and purposeThis study was performed to evaluate the four-dimensional motion of lung tumors during end-exhalation (EE) breath-holding (BH) using cine computed tomography (CT) and investigate the correlation between tumor and surrogate marker motions. Materials and methodsThis study included 28 patients who underwent stereotactic body radiation therapy at our institution and were capable of 15–20 s of EE BH within a ±1.5-mm gating window with external markers. During EE BH with cine CT, 21 s of continuous data were acquired using 320-row multislice CT. Displacements in the tumor position during EE BH were assessed in the left–right (LR), anterior–posterior (AP), and superior–inferior (SI) directions. Pearson’s correlation coefficient (r) between tumor motions during EE BH and diaphragm/external marker motions was also determined. ResultsThe mean absolute maximum displacements of the tumor position during EE BH were 1.3 (range: 0.2–4.0), 1.9 (range: 0.3–12.0), and 1.3 (range: 0.1–7.2) mm in the LR, AP, and SI directions, respectively. The displacement of the tumor position in the AP direction was weakly correlated (|r| < 0.4) with the external marker and diaphragm displacements in many cases (proportions of 50% and 46%, respectively). ConclusionWe found some cases showing substantial displacement in lung tumor positions during EE BH, especially in the AP direction. Because these tumor position displacements did not correlate with surrogate markers and were difficult to detect, we recommend pretreatment evaluation of the four-dimensional motions of tumors during BH using cine CT.

Null-Space Minimization of Center of Gravity Displacementof a Redundant Aerial Manipulator

Displacements of the base during trajectory tracking are a common issue in the control of aerial manipulators. These are caused by reaction torques transferred to the base due to the manipulator motion and, in particular, to the motion of its center of gravity. We present a novel approach to reduce base displacements of a kinematically redundant aerial manipulator by using null-space projection in the inverse kinematic control. A secondary objective function minimizes the horizontal displacement of the manipulator center of gravity. We test this algorithm on different trajectories for both three and four degrees of freedom (DOF) manipulators in a simulation environment. The results comparing our algorithm with inverse kinematic control without the null-space projection show up to an 80% reduction in the end-effector position error and an average of about 56% reduction in maximum base displacement. The simulation implementation also runs faster than in real-time in our code implementation. We provide a workspace analysis based on multiple stopping criteria such as excessive base displacement, joint velocities and end-effector position error for the 3 and 4 DOF manipulators. As expected, the 4 DOF manipulator has a larger workspace.

Spin disorder in a stacking polytype of a layered magnet

Strongly correlated ground states and exotic quasiparticle excitations in low-dimensional systems are central research topics in the solid-state research community. The present work develops a layered material and explores the physical properties. Single crystals of $3R\text{\ensuremath{-}}{\mathrm{Na}}_{2}\mathrm{MnTe}{\mathrm{O}}_{6}$ were synthesized via a flux method. Single-crystal x-ray diffraction and transmission electron microscopy reveal a crystal structure with ABC-type stacking and an $R\text{\ensuremath{-}}3$ space group, which establishes this material as a stacking polytype to previously reported $2H\text{\ensuremath{-}}{\mathrm{Na}}_{2}\mathrm{MnTe}{\mathrm{O}}_{6}$. Magnetic- and heat-capacity measurements demonstrate dominant antiferromagnetic interactions, the absence of long-range magnetic order down to 0.5 K, and field-dependent short-range magnetic correlations. A structural transition at $\ensuremath{\sim}23$ K observed in dielectric measurements may be related to displacements of the Na positions. Our results demonstrate that $3R\text{\ensuremath{-}}{\mathrm{Na}}_{2}\mathrm{MnTe}{\mathrm{O}}_{6}$ displays low-dimensional magnetism, disordered structure and spins, and the system displays a rich structure variety.

Multi-route fusion method of GNSS and accelerometer for structural health monitoring

Displacement extraction of structures is of great significance to structural health monitoring (SHM). Global Navigation Satellite System (GNSS) can provide absolute position, but the sampling rate is limited; while the accelerometer has a higher sampling rate, its displacement is obtained through double integration, which is not suitable for low-frequency deformation monitoring. The data fusion of GNSS and accelerometer is conducive to taking advantage of both for SHM. There has been substantial research undertaken on the data fusion of GNSS and accelerate for structural health monitoring. Most studies in the field of fusion algorithms between GNSS and accelerometer for structural health monitoring have only focused on large displacement extraction. Few empirical studies have focused on the fusion algorithm of slight displacement extraction. The present study aimed to explore an on-demand fusion method with GNSS and accelerometer measurement. The methodological approach taken in this study is a mixed methodology based on the interactive multiple model (IMM) Kalman filter. Three groups of experiments were carried out to verify the proposed method. The findings show that the low-frequency displacement or absolute position is maintained by the Kalman filter of GNSS kinematic positioning, and the dynamic feature or high-frequency displacement is extracted by the IMM Kalman filter of the accelerometer. On the one hand, long-term displacement is ensured, on the other hand, the sensitivity of short-term displacement detection will not be reduced. It is hoped that this research will contribute to a deeper understanding of displacement extraction in SHM.

Tuning of nonlinear optical characteristics of a cylindrical quantum dot by external fields and structure parameters

ABSTRACT In this present study, we have theoretically investigated the effect of applied external electric field and non-resonant intense laser field, as well as the adjustable physical parameters (A, M, and η) of the system, on the linear and nonlinear of GaAs/GaAlAs cylindrical quantum dot. The confinement potential of the quantum dot is composed of the axial potential with a Razavy-type quantum well in the z-direction, and the cylindrical-type potential in the radial direction. To achieve this goal, the wave functions, and the corresponding eigenvalues of the electron are investigated by resolving the time-independent Schrödinger equation using the diagonalisation technique in terms of the effective mass approximation. The linear and nonlinear optical properties’ expressions have been calculated with the help of the compact density matrix method. Our numerical results show that by changing the A, M, and η parameters, we can see a blueshift or redshift in the total optical absorption coefficients (TOACs) and relative refractive index changes (RRICs). Additionally, they are redshifted, and their extrema increase as the radius increases. The increase in electric field or laser field intensities generates a strong displacement of the resonant peak position towards the higher energies, diminishes the TOACs magnitude, and shrinks RRICs extrema. The model potential used in the computation is important, and the study of it will be practical in the development and research of nanostructures systems.

Tracking the Delocalized Proton in Concerted Proton Transfer in Bulk Water.

A solvated proton in water is often characterized as a charge or structural defect, and it is important to track its evolution on-the-fly in certain dynamics simulations. Previously, we introduced the proton indicator, a pseudo-atom, whose position approximates the location of the excess proton modeled as a structural defect. The proton indicator generally yields a smooth trajectory of a hydrated proton diffusing in aqueous solutions, including in the events of stepwise proton transfer via the Grotthuss mechanism; however, the proton indicator did not perform well in the events of concerted proton transfer, for which it occasionally yielded large position displacements between two successive time steps. To overcome this hurdle, we develop a new algorithm of a proton indicator with greatly enhanced performance for concerted proton transfer in bulk water. A protocol is proposed to exhaustively explore the hydrogen-bonding network of the water wires over which the excess proton is delocalized and to properly account for the contributions of the water molecules in this network as the geometry evolves. The new proton indicator (called Indicator 2.0) is assessed in dynamics simulations of an excess proton in bulk water and in specially constructed model systems of more complex architectures. The results demonstrate that the new indicator yields a smooth trajectory in both stepwise and concerted proton transfers.

Efficient structural reliability analysis via a weak-intrusive stochastic finite element method

This paper presents a novel methodology for structural reliability analysis by means of the stochastic finite element method (SFEM). The key issue of structural reliability analysis is to determine the limit state function and corresponding multidimensional integral that are usually related to the structural stochastic displacement and/or its derivative, e.g., the stress and strain. In this paper, a novel weak-intrusive SFEM is first used to calculate structural stochastic displacements of all spatial positions. In this method, the stochastic displacement is decoupled into a combination of a series of deterministic displacements with random variable coefficients. An iterative algorithm is then given to solve the deterministic displacements and the corresponding random variables. Based on the stochastic displacement obtained by the SFEM, the limit state function described by the stochastic displacement (and/or its derivative) and the corresponding multidimensional integral encountered in reliability analysis can be calculated in a straightforward way. Failure probabilities of all spatial positions can be obtained at once since the stochastic displacements of all spatial points have been known by using the proposed SFEM. Furthermore, the proposed method can be applied to high-dimensional stochastic problems without any modification. One of the most challenging problems encountered in high-dimensional reliability analysis, known as the curse of dimensionality, can be circumvented with great success. Three numerical examples, including low- and high-dimensional reliability analysis, are given to demonstrate the good accuracy and the high efficiency of the proposed method.

SolidWorks flow simulation software potential in hydrodynamic processes analysis for cone vortex emulsion

The purpose of this work is to compare the hydrodynamic data of the real flow simulated by SolidWorks Flow Simulation in an emulsor of vortex type. The object of the study is an emulsion, in the central part of the energy separation chamber of which a zone of low pressure, the cavitation zone, is created. In this zone the dispersion phase collapses. Computer simulation of fluid dynamics of the emulsification process has been suggested to optimise the design of this type of emulsor. To check adequacy of results of modelling and real process, visualization and comparative evaluation of shape of flows at pressure of liquid at the inlet 0.4 MPa and its kinematic viscosity 10−6 m2/s. The use of SolidWorks Flow Simulation software has been found to give a fairly close-to-reality overall flow pattern. When considering the calculated flow from the position of fluid displacement and comparing it with experimental data, a good match is seen in the shape of near-axis flows. Three vortex zones are clearly visible in the model. In the real flow there are similar vortex zones which, although not clearly visible, are visualised by photography. With the software, the overall flow pattern is fairly close to reality. However, it is not possible to conclude that the velocities of the calculated and real flows coincide. By considering the various design changes in the simulation and evaluating their effect on the hydro and thermodynamics of the process, some regularities can be identified and used in the design of new designs, i.e., the results of computer simulation can be a good guide in the design of new devices.

Analytical Modeling of Rotary Electromagnetic Fault Current Limiter

Rotary electromagnetic fault current limiter (FCL) is an emerging technology for limiting fault currents in the power network. The device consists of two movable air-core spherical reactor rings (i.e., inner and outer rings). The movable feature allows the reactor rings to rotate, and form a proper mutual positional displacement. This can limit the fault current since the effective inductance of the device is dependent to the mutual angular position of the reactor rings. Due to the unconventional structure, to this date, the design process has solely been based on finite element (FE) method. This paper aims to analytically validate the theory and the overall functionality of the device in both the steady state and transient regime. For this propose, the resistance and the inductance of the device are first computed at normal operating condition using the basic theory of engineering electromagnetics. Next, performance characteristics such as electromagnetic torque, rotational displacement of the reactors, effective inductance of the device, and the network current are calculated at the faulty condition. For verification purposes, analytical results are compared with via FE simulation and experimental test.

Using MRI to measure position and anatomy changes and assess their impact on the accuracy of hyperthermia treatment planning for cervical cancer

Purpose We studied the differences between planning and treatment position, their impact on the accuracy of hyperthermia treatment planning (HTP) predictions, and the relevance of including true treatment anatomy and position in HTP based on magnetic resonance (MR) images. Materials and methods All volunteers were scanned with an MR-compatible hyperthermia device, including a filled waterbolus, to replicate the treatment setup. In the planning setup, the volunteers were scanned without the device to reproduce the imaging in the current HTP. First, we used rigid registration to investigate the patient position displacements between the planning and treatment setup. Second, we performed HTP for the planning anatomy at both positions and the treatment mimicking anatomy to study the effects of positioning and anatomy on the quality of the simulated hyperthermia treatment. Treatment quality was evaluated using SAR-based parameters. Results We found an average displacement of 2 cm between planning and treatment positions. These displacements caused average absolute differences of ∼12% for TC25 and 10.4%–15.9% in THQ. Furthermore, we found that including the accurate treatment position and anatomy in treatment planning led to an improvement of 2% in TC25 and 4.6%–10.6% in THQ. Conclusions This study showed that precise patient position and anatomy are relevant since these affect the accuracy of HTP predictions. The major part of improved accuracy is related to implementing the correct position of the patient in the applicator. Hence, our study shows a clear incentive to accurately match the patient position in HTP with the actual treatment.

Research on Vibration Characteristics of an Underground Powerhouse of Large Pumped-Storage Power Station

With the rapid development of pumped storage, the vibration problems caused by the operation of power stations have become increasingly prominent. In this paper, a large-scale pumped-storage power station is taken as the research object, and a three-dimensional refined finite element model of the underground powerhouse including the surrounding rock mass is established. Based on the analysis of the vibration source of the powerhouse and the water diversion pipeline, the modal and dynamic response analysis of the underground powerhouse of the hydropower station is carried out, and the distribution law of the larger vibration displacement position is revealed. The calculation results show that under the premise that the vibration source is selected reasonably and the numerical model is accurate, the main frequency of the underground powerhouse structure can be obtained more accurately. After optimizing the design of the underground powerhouse based on the calculation results, the resonance problem of the underground powerhouse of the hydropower station can be avoided. The dynamic elastic modulus of the rock mass around the underground powerhouse has little influence on the mode shape of the powerhouse, but has a great influence on its fundamental frequency. When the dynamic elastic modulus of the rock mass increases by 50%, the fundamental frequency of the plant increases by about 29%. At the same time, the mode shape of each order of the underground powerhouse structure does not change much, mainly manifested as the vibration of the beam system structure, which is mainly caused by the stiffness of the beam system components being much smaller than the structural stiffness of the windshield, machine pier, and mass concrete around the volute. The research results can provide references for the design of underground powerhouses of large-scale pumped-storage power stations and the analysis of vibration problems.

Saliency-Based Rotor Spatial Position Displacement Self-Sensing for Self-Bearing Machines.

Self-bearing machines do not contain physical bearings but magnetic bearings. Both rotor rotary and spatial positions displacement are required in these types of machines to control the rotor position while it is levitating. Self-bearing machines often use external sensors for x (horizontal) and y (vertical) spatial position measurement, which will result in additional cost, volume, complexity, and number of parts susceptible to failure. To overcome these issues, this paper proposes a xy-position estimation self-sensing technique based on both main- and cross-inductance variation. The proposed method estimates x and y position based on inductive saliency between two sets of three-phase coils. The proposed idea is applied on a combined winding self-bearing machine which does not require additional suspension force winding. No additional search coil placement for xy-position estimation is required. Therefore, the proposed algorithm can result in a compact size self-bearing machine that does not require external sensors for xy-position measurement and suspension force winding.

Light-induced translation symmetry breaking via nonlinear phononics

Light has a wavelength that is usually longer than the size of the unit cell of crystals. Hence, even intense light pulses are not expected to break the translation symmetry of materials. However, certain materials, including KTaO$_3$, exhibit peaks in their Raman spectra corresponding to their Brillouin zone boundary phonons due to second-order Raman processes, which provide a mechanism to drive these phonons using intense midinfrared lasers. We investigated the possibility of breaking the translation symmetry of KTaO$_3$ by driving its highest-frequency transverse optic mode $Q_{\textrm{HX}}$ at the $X$ $(0,\frac{1}{2},0)$ point. Our first principles calculations show that the energy curve of the transverse acoustic mode $Q_{\textrm{LZ}}$ at $X$ softens and develops a double-well shape as the value of the $Q_{\textrm{HX}}$ coordinate is increased, while that of the other transverse acoustic component $Q_{\textrm{LX}}$ hardens when the value of the $Q_{\textrm{HX}}$ coordinate is similarly varied. We performed similar total energy calculations as a function of the $Q_{\textrm{HX}}$ coordinate and electric field to extract the nonlinear coupling between them. These were then used to construct the coupled equations of motion for the three phonon coordinates in the presence of an external pump term on the $Q_{\textrm{HX}}$ mode, which we numerically solved for a range of pump frequencies and amplitudes. We find that 465 MV/cm is the smallest pump amplitude that leads to an oscillation of the $Q_{\textrm{LZ}}$ mode at a displaced position, hence, breaking the translation symmetry of the material. Such highly intense light pulses cannot be generate by currently available laser sources, and they have the possibility to damage the material. Nevertheless, our work shows that light can in principle be used to break the translation symmetry of a material via nonlinear phononics.