ObjectivePlasma treatment can be used as surface treatment of PEEK (poly-ether-ether-ketone) to increase the bonding strength between veneering composite and dental prosthetic frameworks of PEEK or enhance biocompatibility of PEEK implants. These improvements are probably based on chemical changes of the PEEK surface. However, the aim of the study was to evaluate the impact of different low-pressure plasma treatments on surface properties of PEEK, such as roughness, hydrophilicity, micro-hardness, crystallinity and biological activity of PEEK. MethodsDue to different plasma treatments, 143 disc-shaped specimens of pure implantable PEEK were divided into 4 groups: PEEK (no plasma treatment, n = 29), H-PEEK (hydrogen plasma treatment, n = 38), O-PEEK (oxygen plasma treatment, n = 38), H/O-PEEK (hydrogen/oxygen plasma treatment with a gas mix ratio of 2:1, n = 38). Subsequently, surface roughness, surface contact angle, surface crystallinity, surface micro-hardness and human osteoblast cell coverage area of each group were examined. ResultsThe hydrophilicity, crystallinity and micro-hardness of the plasma-treated groups increased significantly compared to the untreated group, whereas significant differences in the results of the micro-hardness tests could be shown between all groups up to a test force of 0.02N. Cell density was significantly higher on treated vs. untreated PEEK surfaces. Oxygen and H/O plasma treatments revealed to be most effective, whereas H/O plasma worked ten times faster to achieve the same effects. SignificanceThe hydrogen-oxygen, 2/1-mixed plasma treatment combines the effect of hydrogen and oxygen plasma which strongly improve the surface properties of PEEK implant material, such as hydrophilicity, crystallinity, surface micro-hardness and HOB cell adhesion.
Read full abstract