Polarization Mode Research Articles

Partially coherent twisted vector vortex beam enabling manipulation of high-dimensional classical entanglement.

In this paper, we present a novel form of a partially coherent beam characterized by classical entanglement in higher dimensions. We coin the term "twisted vector vortex (TVV) beam" to describe this phenomenon. Similar to multi-partite quantum entangled states in higher dimensions, the partially coherent twisted vector vortex beam possesses distinct properties such as non-uniform polarization, vortex phase, and twist phase. Through experiments, we offer empirical evidence for these three degrees-of-freedom in the light field. The results demonstrate that the state of the light is inseparable in terms of polarization and orbital angular momentum (OAM) modes. Additionally, the twist phase introduces an additional dimension in controlling the vector vortex beam. This research reveals the possibility of new controlling dimensions in classical entanglement through the chirality of coherence within partially coherent light. Consequently, this opens up new avenues for the utilization of partially coherent light in both classical and quantum domains.

Effect of microstructure and environmental conditions on the dielectric properties of plasma sprayed Al2O3 insulating coatings

The effect mechanism of microstructure and environmental conditions on the dielectric properties of plasma-sprayed Al2O3 insulating coatings was systematically investigated in this study. Two kinds of Al2O3 powders with different particle sizes were used to deposit the coatings under the same spraying parameters. The microstructures of the coatings (including porosity, pore size, crack density, and phase composition) were analyzed using scanning electron microscopy (SEM), electron backscattered diffraction (EBSD), and X-ray diffraction (XRD). The dielectric properties (including breakdown strength, resistivity, dielectric constant, dielectric loss, and complex impedance) were characterized by a two-electrode measurement cell. The results indicated that the coating deposited with the larger-sized powder (D50=45.8 μm) exhibited higher porosity, α-Al2O3 content, and connected crack density, than the coating with the other kinder of powder (D50=22 μm). The DC and AC breakdown strengths were found to be related to the porosity of the coatings and the partial discharge in the pores results in the eventual breakdown. The resistivity of the coatings decreased significantly with increasing humidity due to the moisture adsorbed on the pores and cracks. In high-humidity environments, the water molecule enhanced space charge polarization (WESCP), as the main polarization mode, contributed to the dramatic increase of the dielectric constant and dielectric loss. Moreover, the complex impedance and phase angle showed frequency-dependent changes in different environments, suggesting a combined effect of humidity and temperature on the polarization and conductance of coatings. The obtained results of this study could pave the way for the design and application of high-performance plasma-sprayed insulating coatings.

Comparison of tandem pumping and direct pumping on high-power linearly polarized fiber laser.

In this article, a thorough model of linearly polarized fiber laser considering polarization coupling, mode coupling, SBS, and SRS effects is established. The output results of direct pumping and tandem pumping linearly polarized fiber laser under different SBS and SRS intensity settings are simulated. The results show that direct pumping is a better pumping scheme at present, and if the doping concentration of gain fiber can be further increased and the mode field quality of corresponding passive fiber can be optimized, the disadvantages of tandem pumping can be suppressed. To explore the potential of tandem pumping, a backward tandem pumped linearly polarized fiber amplifier is built and 875 W over 13 dB linearly polarized laser output is obtained.

Reconfigurable polarization processor based on coherent four-port micro-ring resonator

Abstract Polarization processors with versatile functionalities are needed in optical systems, which use or manipulate polarized light. In this paper, we propose and realize an integrated polarization processor based on a coherent 4-port micro-ring resonator. The arbitrary unknown polarization state is input to the polarization processor via a 2-dimensional grating coupler (2DGC), which serves as a polarization beam splitter. The coherent 4-port micro-ring resonator (MRR) operates as a unitary processor and is formed by one crossbar micro-ring resonator and two thermally tunable phase shifters, one of which tunes the micro-ring while the other tunes the coherent interference between the two inputs from the 2DGC. The 4-port system can be used to control the input polarization states that appear at the two output ports and, therefore, can be used to implement a multi-function polarization processor, including polarization descrambler, polarization switch, polarizers, and polarization analyzer (both division of space (DOS) and division of time (DOT)). In this paper, we experimentally demonstrate the use of coherent 4-port MRR for polarization mode switching and for polarization mode unscrambling. The polarization unscrambler was capable of separating two polarization-multiplexed 40 GHz data lanes from the input fiber with crosstalk levels below −21 dB and is suitable for use in the receiver for polarization-multiplexed direct-detection optical communications systems. The same photonic circuit may be used as a polarization analyzer, either as a DOS polarization analyzer or a DOT polarization analyzer. The DOS polarization analyzer measured the polarization with measured deviation of the orientation angle (2ψ) varying from −0.5° to 1.3°and deviation of ellipticity angle (2χ) varying from −0.98° to 7.27°. The DOT polarization analyzer measured the polarization with a deviation of the orientation angle (2ψ) that varied from −2.93° to 3.49° and deviation of ellipticity angle (2χ) that varied from −3.5° to 3.05°.

Promoting second-harmonic generation in the LiNbO3 film combined with metasurface using plasmonic quasi bound states in the continuum

Metasurfaces have become a fascinating framework for nonlinear optics, with the advantages of a compact footprint and unprecedented flexibility to manipulate light. However, further advancements are necessary to enhance the efficiency of metasurfaces in nonlinear devices. Here, a novel approach for second harmonic generation (SHG) based on the LiNbO3 metasurface using leaked plasmonic bound states in the continuum (BIC) is proposed. The behavior of SHG in the guided mode resonance (GMR) under TE polarization and plasmonic modes under TM polarization is investigated. The structure consists of a plasmonic grating overlying a nonlinear lithium niobate dielectric waveguide layer that supports two different BIC, namely plasmonic BIC and GMR BIC. The evolution of second harmonics generation(SHG) near two groups of BIC is explored. The SHG of the plasmonic quasi-BIC is stronger than that based on the GMR quasi-BIC. In addition, the plasmonic accidental quasi-BIC produces stronger harmonic effects than the quasi-BIC based on symmetry-broken. Specifically, at a pump intensity of 30 MW/cm2, this accidental quasi-BIC results in SHG efficiency of 1.86 × 10−3. This work provides a valuable approach to achieving enhanced SHG using plasmonic and BIC. It opens up new possibilities for the utilization of LiNbO3 in integrated nonlinear nanophotonics and paves the way for the development of advanced nonlinear photonic devices.

Linear polarization and narrow-linewidth external-cavity semiconductor laser based on birefringent Bragg grating optical feedback

We demonstrate an external-cavity semiconductor laser (ECSL) with linear polarization and a narrow linewidth. A birefringent Bragg grating prepared by a femtosecond laser point-by-point technique in a polarization-maintaining fiber (PMF) is used to provide external-cavity feedback, and its polarization-dependent characteristics enable selection of the main polarization mode and linewidth narrowing of the ridge waveguide emission gain chip (GC). This compact and robust ECSL achieves an output power of > 60 mW and a polarization extinction ratio (PER) of > 30 dB. We simulate and calculate the linewidth and injection current, while a Lorentz linewidth of 2.58 kHz is obtained based on delayed self-heterodyne beat frequency measurement. This flexible and cost-effective solution allows realization of a compact ECSL with linear polarization and a narrow linewidth.

PMD tolerant transmission using multiple optical phase conjugators in the discretely amplified systems

Abstract In this paper, the impact of polarization mode dispersion (PMD) on system performance in coherent optical transmission assisted by optical phase conjugation (OPC) technique is numerically investigated for a 9-channel PM-4QAM system at 128Gbit/s. The OPC-aided transmission, amplified with lumped erbium doped fiber amplifier (EDFA), is a variation of the conventional dispersion-managed link, which is also called dispersion-inverted link. We demonstrate that introducing more OPCs along the link can partly suppress the PMD-induced impairments and thus improve the system performance significantly. Results of 960-km dispersion-managed transmission show that PMD effect will cause a performance penalty of 1.8 dB when using mid-link OPC (i.e., only 1-OPC), while this penalty will decrease to about 0.4 dB when employing 6-OPCs along the link. Comparing with conventional digital back-propagation (DBP) technique, a performance improvement of about 3.1 dB is observed with multi-OPCs when fiber PMD is equal to 0.1ps/ k m $\sqrt{km}$ .

Dispersion Properties of Surface Waves Decaying in Red-Shifted and Blue-Shifted Gaps in Photonic Hypercrystals

The dispersion characteristics of surface waves for transverse electric and magnetic polarization modes of photonic hypercrystals (PHC) are theoretically explored. PHC are composed of a dielectric and hyperbolic metamaterial (HMM) with thin layers of both metal and dielectric surface waves that decay inside red-shifted gaps have a negative group velocity, whereas surface waves that decay inside traditional blue-shifted gaps have more typical characteristics. Curve plotting is used to elucidate on how these surface waves depend on several other structural properties such as filling factor, widths of HMM and dielectric, frequency range and angle of incidence etc.

A versatile device for implementing the optical quantum gates in multiple degrees of freedom

Optical quantum logic gates are the basic elements for building optical quantum computer. Usually, to implement different logic gates, different optical elements and frameworks are needed. Here, we propose a versatile device that a modified Sagnac interferometer composed of a spatial light modulator (SLM) for implementing multiple optical gates within a classical light framework. We demonstrate that the device can manipulate the polarization and full-field spatial modes of photons to perform multi-qubit logic operations. And versatile conversions between different logic gates are achieved by simply altering the hologram imposed on SLM. Our device shows a good performance in exploring the photon’s full degrees of freedom, which makes it an appropriate candidate for integrated optical computing.

The topology and polarization of subbeams associated with the drifting subpulse emission of pulsar B0943+10 – VII. Analysis of transitional intervals in the mode-switching process

ABSTRACT We report a study of the transitional intervals between pulsar B0943+10’s two primary Q and B emission modes using Arecibo 327-MHz observations. The goal of this study was to detect signs of a ‘transitional’ mode at 327 MHz, discovered recently at lower frequencies. We have found subpulse drift and profile form patterns at 327 MHz similar to those identified at lower frequencies in the Q-to-B mode transition process. Pulse fading during about 15 stellar rotations preceding the appearance of subpulse drift was observed as well. Another part of the work is devoted to a detailed study of the pulse polarization variations in the main modes. A complex behaviour of the linear polarization percentage (LPP) of the dominant first component of the average profile with B-mode age has been found: during the first 4 h, the LPP continuously increases from 5 to 40 per cent, and over the next 1.5 h gradually decreases down to 30 per cent until the subsequent onset of the Q mode. In contrast, the LPP of the second component does not change over the B-mode lifetime, remaining at the level of 22 per cent. A non-instantaneous decrease in the LPP was detected at Q-mode onset. No systematic change of the LPP of the averaged Q-mode pulses over several hours of age was found. The results are discussed within the framework of the core–cone beam model and orthogonal polarization modes.

Axial Ratio Improvement of Circularly Polarized Antenna Using Parasitic Elements for 5G Applications

A circular polarization (CP) antenna that can switch between right-handed circular polarization (RHCP) and left-handed circular polarization (LHCP) modes has been designed and introduced for 5G applications in the 3.5 GHz frequency band in this work. The proposed antenna comprises a crossed dipole fed by a 90° hybrid coupler. The axial ratio (AR) enhancement of 190 MHz is achieved by vertically stacking a substrate with a distance of λ / 4 from the ground plane, including an annular ring-shaped parasitic element above a circular-shaped disc. Consequently, by creating surface current rotation on the parasitic elements, the CP performance of the antenna is improved. According to the experiments, a wide impedance bandwidth of 930 MHz (3.19-4.12 GHz) and an overlapped AR bandwidth of 23.5% for both modes are achieved. The overall size of the antenna is 100 × 92.5 × 24 m m 3 , and the gain is stable across the operating frequency band with a peak value of 6.78 dBic.

Ultra‐High Bandwidth Density and Power Efficiency Chip‐To‐Chip Multimode Transmission through a Rectangular Core Few‐Mode Fiber

AbstractOptical interconnects have emerged as promising solutions for assisting electrical interconnects in short‐reach scenarios, where high bandwidth density and energy efficiency are of particular importance. Mode‐division multiplexing (MDM), capable of enhancing the bandwidth density and energy efficiency of optical systems, has drawn tremendous interest. However, the chip‐to‐chip MDM optical interconnects are impeded by the multimode chip‐fiber interfaces, where the transverse modes on the MDM chip mismatch with the linear polarization modes in the circular core few‐mode fiber (CCF). Moreover, the high differential group delays (DGDs) of a conventional CCF make the digital signal processing (DSP) computation complex thus consuming high power. To overcome these bottlenecks, a new multimode coupling solution based on a rectangular core few‐mode fiber with ultra‐low DGDs and an integrated multimode coupler is proposed. Based on this coupling scheme, a chip‐to‐chip MDM transmission experiment is performed on the TE00, TM00, TE10, and TM10 modes, and the highest bandwidth density of 19.4 Tb s mm −1 is realized at the chip facet. The DSP power consumption is ≈6% of a conventional CCF‐based system. It is believed that this work will pave the way for ultra‐compact, high density, low cost, and low computation‐complexity optical interconnects, such as data centers, cloud computing, and telecommunications.

Analysis of a highly temperature-sensitive gold-coated plasmonic biosensor for analyte detection

A temperature-sensitive gold coated PCF-based surface plasmon resonance (SPR) biosensor was examined for detecting analytes based on their refractive indices. The proposed sensor attained maximum amplitude sensitivities (AS) of 1432 RIU−1 and 1291 RIU−1, wavelength sensitivities (WS) of 13,500 nm/RIU and 13,000 nm/RIU in X and Y- polarized mode individually in RI spectrum of 1.34–1.4. Furthermore, the proposed sensor produced ultimate figure of merit (FOM) values of 546.93 RIU−1 and 521.4601 RIU−1 in x and y polarization modes. High birefringence of 1.5 × 10−3 was also computed for the suggested sensor. Additionally, the proposed sensor shows high temperature sensitivity of 4.5833 nm/°C with a comparable resolution of 2.18××10−2 °C and a maximum FOM value of 0.101 °C−1 in the detection range of −114 °C to 78 °C in the presence of ethanol as a sensing medium. The reported sensor therefore can be considered as a notable solution for any chemical or biological analytes detection.

Polarization and Spatial Distribution Features of Pc4 and Pc5 Waves in the Magnetosphere

AbstractUltra‐low frequency waves interact with different particle populations all over the magnetosphere. Some interaction mechanisms are associated with certain wave modes, but is it really so and what about waves interaction between each other? We present a statistical analysis of Pc4 and Pc5 waves in the magnetosphere of the Earth that were observed by Arase satellite from March 2017 to December 2020. These waves were classified by polarization into toroidal, poloidal, and compressional waves. Toroidal and poloidal waves are thought to be Alfvén waves that are eigenoscillations of Earth's magnetic field lines. The former are believed to be generated by external sources, while the latter one—by internal sources. We compared spatial distribution features with well‐known case studies to reveal their nature for all three polarizations. A high inclination of Arase orbit supported a wave field‐aligned structure research. We found that toroidal waves are mostly odd harmonics and poloidal waves are both even and odd harmonics of Alfvén waves, while compressional waves were observed in a narrow equatorial region only. Different wave generation mechanisms that cause a clear difference in spatial distributions of toroidal, poloidal, and compressional waves could excite a specific wave polarization. Surprisingly, the statistics of wave polarization has a normal distribution without separate clusters. We suggest that polarization change and mode coupling processes make mixed polarization the most common type of polarization in the magnetosphere. This result raises the question of how the polarization change process affects wave‐particle interactions responsible for energy transport throughout the magnetosphere.

Fissure-like vector curve type composite sensor based on polarization mode interference

Fissure-like vector curve type composite sensor based on polarization mode interference

Generating vector beams by modulating and superimposing multiple polarization modes within a helium-neon resonant cavity

In recent years, vector beams, which have greater control freedom due to their non-uniform spatial polarization distribution, have received extensive attention from scholars. In this paper, we present a straightforward intracavity modulation method by increasing the volume of the gas gain medium inside the cavity to induce multimode oscillation. Subsequently, Brewster windows and a curved-output mirror are used to achieve polarization control and superposition of multiple modes within the cavity to generate stable and controllable vector beams. In addition, the polarization purity of the radial vector beam and the angular vector beam can reach 87.98% and 85.52%, respectively. This work can not only break the understanding of the traditional vector beam generation method and deepen the understanding of laser cavity regulation technology but also play a guiding role in designing compact vector lasers.

Description of bandgaps opening in chiral phononic crystals by analogy with Thomson scattering

Chiral phononic crystals (PnCs) provide unique properties not offered by conventional metamaterial based on classic Bragg scattering and local resonance. However, it is insufficient to only consider the inertial amplification effect to describe its bandgap mechanism due to the absence of the bandgap caused by the chirality in some specific chiral structures. Here, we theoretically and experimentally introduce an analogy with Thomson scattering in electromagnetic waves to characterize the bandgap phenomena in chiral PnCs with translation–rotation coupling. Another phononic structures with translation–translation coupling are proposed to illustrate the universality of the analogy. We evidence that the coupling motion in chiral unit cells is similar to the result of Thomson scattering, which quantitatively formulizing as inertial amplification in theory and, twice elastic Thomson scattering allows the waves in the same polarization mode to superpose in antiphase, which is essence of the bandgap formation. This finding sheds a new light on the physics of the elastodynamic wave manipulation in chiral PnCs, thus opening a definite route for the pragmatic exploitation of chiral PnCs as well as other structures with motion coupling in achieving low-frequency and broad bandgaps.

Study on Vernier effect of orthogonal Mach-Zehnder interferometers based on Polarization-maintaining fiber

A polarization-maintaining fiber interferometer (PMI) is proposed and experimentally verified for temperature measurement using the Vernier effect. The PMI is fabricated by inserting a section of polarization-maintaining fiber (PMF) between two pieces of multimode fiber (MMF). Owing to the birefringence of PMF, the PMI contains a pair of orthogonal Mach-Zehnder interferometers (MZIs). The interference occurs between the cladding mode and two orthogonal polarization modes that the polarization directions parallel to the slow and fast axis of the PMF, which results in the formation of MZI-X and MZI-Y. The sensing mechanism of the PMI is theoretically studied and experimentally verified. The temperature sensitivity of the PMI reaches −757.27 pm/℃ through demodulating Vernier envelopes generated by two orthogonal MZIs. The length of the proposed PMI is only 15.4 mm, which is much smaller than most sensors based on the Vernier effect. Consequently, the PMI has great potential in the temperature monitoring of small spaces.

Qualitative analysis of PMD-induced long-haul optical fiber link

Abstract This paper studies the detrimental effect of polarization mode dispersion on long-haul optical fiber communication in terms of the quality factor and bit error rate. The dispersion value is varied for different fiber lengths, specifically for long-haul communication, and the results obtained are analyzed in terms of the quality factor. The polarization mode dispersion causes pulse broadening, leading to interchannel interference. There is a need to check the occurrence and the associated effects of this dispersion. The communication range for conducting the analysis varies from 150 km to 350 km. The analysis is first conducted on varied communication fiber link length for different dispersion values, and it is observed that a fiber length of 200 km gives comparatively favorable results, as seen from the BER analysis.

Multifunctional ultralight magnetic CNFs/MXene/Fe3O4 nanodiscs aerogel with superior electromagnetic wave absorption performance

The design of innovative microstructures and the implementation of an appropriate multi-component strategy remain challenging in the development of advanced electromagnetic wave (EMW) absorbing materials. Achieving strong absorption and a wide effective absorption bandwidth while maintaining a thin sample thickness and low filling level is particularly demanding. Herein, a three-dimensional (3D) dielectric cellulose nanofiber (CNF)/Ti3C2Tx MXene carbon aerogel, incorporating magnetic Fe3O4 nanodiscs (NDs), was fabricated using a directional-freezing technique followed by reduction. Surprisingly, the reduction process activates the multifunctional application of aerogel with better elasticity and greatly improved electromagnetic properties, killing two birds with one stone. The structured cellular arrangement and the presence of diverse dielectric/magnetic interfaces contribute to the exceptional absorption capabilities by facilitating optimal impedance matching, enabling multiple polarization modes, and fostering electric/magnetic coupling phenomena. The aerogel exhibits excellent microwave absorption properties, characterized by its ultra-lightweight (3 % of filling ratio and 4.65 mg cm−3 of density), ultra-thin (2.18 mm), ultra-wide frequency band (6.68 GHz) and strong absorption (-56.8 dB). Additionally, the aerogel provides attractive functions such as thermal insulation and great mechanical properties (100 % recovery after 1000 cycles under 50 % strain). This study lays the groundwork for the advancement of microwave-absorbing materials, showcasing their vast potential for multifaceted applications.