Planar Resonator Research Articles

Small extracellular vesicles' enrichment from biological fluids using an acoustic trap.

Small extracellular vesicles (sEVs), a form of extracellular vesicles, are lipid bilayered structures released by all cells. Large-scale studies on sEVs from clinical samples are necessary, but a major obstacle is the lack of rapid, reproducible, efficient, and low-cost methods to enrich sEVs. Acoustic microfluidics have the advantage of being label-free and biocompatible, which have been reported to successfully enrich sEVs. In this paper, we present a highly efficient acoustic microfluidic trap that can offer low and large volume compatible ways of enriching sEVs from biological fluids by flexible structure design. It uses the idea of pre-loading larger seed particles in the acoustic trap to enable sub-micron particle capturing. The microfluidic chip is actuated using a piezoelectric plate transducer attached to a silicon-glass bonding plate with circular cavities. Each cavity works as a resonant unit, excited at the frequency of both the half wave resonance in the main plane and inverted quarter wave resonance in the depth direction, which has the ability to strongly trap seed particles at the center, thereby improving the subsequent nanoparticle capture efficiency. Mean trapping efficiencies of 35.62% and 64.27% were obtained using 60 nm and 100 nm nanobeads, respectively. By the use of this technology, we have successfully enriched sEVs from cell culture conditioned media and blood plasma at a flow rate of 10 μL min-1. The isolated sEV subpopulations are characterized by NTA and TEM, and their protein cargo is determined by WB. This acoustic trapping chip provides a rapid and robust method to enrich sEVs from biofluids with high reproducibility and sufficient quantities. Therefore, it can serve as a new tool for biological and clinical research such as cancer diagnosis and drug delivery.

Highly Sensitive Microwave Sensor Based on Planar Resonator Arrangement for Dielectric Material Characterization

Highly Sensitive Microwave Sensor Based on Planar Resonator Arrangement for Dielectric Material Characterization

Proximal Policy Optimization Based Optimization of Microwave Planar Resonators

Proximal Policy Optimization Based Optimization of Microwave Planar Resonators

3-Bit coded metasurface for linear and circular polarized vortex beam broadband modulation based on dual-frequency multistage resonance

A metasurface design scheme is proposed based on reflective double vertical U-shaped resonators. Compared to planar resonators with the same parameters, vertical meta-atom can excite magnetic dipole resonance and quaternary resonance respectively at low and high frequency to achieve stable wideband phase shift and unique free regulation. Vertical meta-atoms can be applied as 3-bit coding elements in linearly polarized (LP) and circularly polarized (CP) states with bandwidths of 0.7–1.1 THZ and 0.55–1.5 THZ, respectively. At the same time, as a half-wave plate, the deflection conversion rate is 95%, the relative bandwidth is 69%, and the operating Angle is 80°. In order to verify the application capability of the designed meta-atom, the excitation and separation of multi-stage vortex beams are performed in the wide frequency range of LP and CP using the coded convolutional addition method. The designed meta-atom only needs to regulate a single structural parameter to fully satisfy the requirements of 3-Bit broadband coding under LP and CP incidence, so it has multi-type polarization wave universality and ultra-wide working bandwidth. Meanwhile, the method can be effectively applied to optical band and microwave band.

Electrically tunable and switchable perfect infrared absorber based on ENZ material

In this paper, a dynamically tunable and switchable perfect infrared absorber is put forward, which is composed of a gold ring array, an indium tin oxide (ITO) layer, an alumina (Al2O3) spacer and a continuous Au film from top to bottom. Epsilon-near-zero (ENZ) mode in ITO layer is excited by localized surface plasmon resonance (LSPR) mode of the gold ring. With the increase of the biasing voltage V, the carrier concentration of ITO material decreases, and the absorption peak caused by ENZ resonance blue shifts obviously. Notice that our infrared absorber can realize bidirectional switching of “ON” and “OFF” states at 1210 nm, with modulation depth of 70 % and switching contrast (SC) of 241 %, manifesting its excellent electrical regulation performance. After verification, the switching performance of our absorption structure has a high precision tolerate of the manufacturing process. A clear Fano type absorption curve appears in the wavelength range 1000 nm–1300 nm, under the biasing voltage V of 3.4 V. Moreover, a series of small absorption peaks are produced by Fabry-Pérot (F–P) resonance in the horizontal plane caused by the standing wave in the ENZ layer, and this phenomenon is unexpected. We propose a theoretical interpretation for the absorption mechanism in both cases based on multiple interference model. It is also proved that the proposed infrared absorber is polarization insensitive and exhibits high absorptance (>90 %) over an incident range of 0 deg–60 deg. The electrically tunable absorption switch function makes our absorber have potential in selective thermal emitters, infrared sensors, infrared stealth, beam focusing and other fields.

Design of novel highly sensitive sensors for crack detection in metal surfaces: theoretical foundation and experimental validation

The application of different types of microwave resonators for sensing cracks in metallic structures has been subject of many studies. While most studies have been focused on improving the sensitivity of planar crack sensors, the theoretical foundation of the topic has not been treated in much detail. The major objective of this study is to perform an exhaustive study of the principles and theoretical foundations for crack sensing based on planar microwave resonators, especially defective ground structures (DGS) including complementary split ring resonators (CSRRs). The analysis is carried out from the equivalent circuit model as well as the electromagnetic (EM) field perspectives, and guidelines for the design of crack sensors with high sensitivity are developed. Numerical and experimental validation of the provided theoretical analysis is another aim of this article. With this aim, the developed guidelines are used to design a crack sensor based on a single-ring CSRR. It is shown that the sensitivity of the proposed sensor is almost three times higher than the sensitivity of a conventional double-ring CSRR. Moreover, it is demonstrated that folded dumbbell-shape DGS resonators can be used to achieve even higher sensitivities. The CSRR-based crack sensors presented in this study and other studies available in the literature are only sensitive to cracks with a specific orientation. To address this limitation, a modified version of the DGS is proposed to sense cracks with arbitrary orientations at the cost of lower sensitivity. The performance of all the presented sensors is validated through EM simulation, equivalent circuit model extraction, and measurement of the fabricated prototypes.

Detection of impact damage in glass fibre-reinforced polymer composites using a microwave planar resonator sensor

ABSTRACT A novel non-destructive testing scheme was proposed for the detection of impact damage in glass fibre-reinforced polymer (GFRP) composites using a microwave planar resonator sensor. The sensor offers the advantages of small size, low cost and simple structure. It is an open-circuited λ/2 long microstrip line and the detection principle is material perturbation. Electromagnetic simulation verifies the sensor design. A GFRP specimen subjected to 5,10 and 20 J impact was examined. The 20 J impact damage was detected through line and two-dimensional scanning. The line scanning enabled accurate localisation of the damage, whereas the two-dimensional scanning facilitated more precise reconstruction of the surface damage features in addition to localisation. The sensor performance for detecting impact damage with lower energy levels was investigated by line scanning. It was found that the sensor could detect and locate 10 J impact damage. Principal component analysis was introduced to significantly reduce the false detection of the 5 J impact damage. It is well demonstrated that the proposed scheme could serve as an alternative method.

An integrated microwave-to-optics interface for scalable quantum computing.

Microwave-to-optics transduction is emerging as a vital technology for scaling quantum computers and quantum networks. To establish useful entanglement links between qubit processing units, several key conditions must be simultaneously met: the transducer must add less than a single quantum of input-referred noise and operate with high efficiency, as well as large bandwidth and high repetition rate. Here we present a design for an integrated transducer based on a planar superconducting resonator coupled to a silicon photonic cavity through a mechanical oscillator made of lithium niobate on silicon. We experimentally demonstrate its performance with a transduction efficiency of 0.9% with 1 μW of continuous optical power and a spectral bandwidth of 14.8 MHz. With short optical pulses, we measure the added noise that is limited to a few photons, with a repetition rate of up to 100 kHz. Our device directly couples to a 50 Ω transmission line and can be scaled to a large number of transducers on a single chip, laying the foundations for distributed quantum computing.

Second sound resonators and tweezers as vorticity or velocity probes: Fabrication, model, and method.

An analytical model of open-cavity second sound resonators is presented and validated against simulations and experiments in superfluid helium using a new resonator design that achieves unprecedented resolution. The model incorporates diffraction, geometrical misalignments, and flow through the cavity and is validated using cavities operated up to their 20th resonance in superfluid helium. An important finding is that resonators can be optimized to selectively sense either the quantum vortex density carried by the throughflow-as typically done in the literature-or the mean velocity of the throughflow. We propose two velocity probing methods: one that takes advantage of misalignments between the tweezers' plates and other that drives the resonator non-linearly, beyond a threshold that results in the self-sustainment of a vortex tangle within the cavity. A new mathematical treatment of the resonant signal is proposed to adequately filter out parasitic signals, such as temperature and pressure drift, and accurately separate the quantum vorticity signal. This elliptic method consists in a geometrical projection of the resonance in the inverse complex plane. Its effectiveness is demonstrated over a wide range of operating conditions. The resonator model and elliptic method are being utilized to characterize a new design of resonators with high resolution, thanks to miniaturization and design optimization. These second-sound tweezers are capable of providing time-space resolved information similar to classical local probes in turbulence, down to sub-millimeter and sub-millisecond scales. The principle, design, and microfabrication of second sound tweezers are being presented, along with their potential for exploring quantum turbulence.

Computational optimization of acoustofluidic devices for advanced particle micromanipulation

Acoustofluidic devices, which combine principles of acoustics and microfluidics, have emerged as a promising platform for biological micro-object micromanipulation due to their non-invasive, accurate, rapid, and label-free qualities. Acoustofluidic devices have found utility in various biomedical applications including single-cell studies, point-of-care testing, lab-on-a-chip studies, and tissue engineering. In this work, we present novel device configurations which enable complex and high-resolution control of suspended micro-objects. The studies presented here utilize computational analysis to optimize (1) traveling surface acoustic wave device dimensions, (2) the configuration of a planar acoustic resonator that integrates a structured surface, (3) the thickness of the coupling layer and superstrate materials for bulk-wave transmission, and (4) the shape of acoustically actuated 3-D microstructures. These devices were verified experimentally to generate highly localized acoustic fields and acoustic streaming effects enabling rapid and spatially controllable particle capture, transport, and patterning. In doing so, this work demonstrates that computational analysis is an integral part of the development of acoustofluidic devices for advanced micromanipulation, which have extensive potential in biomedical applications.

Review of scientific instruments: Evaluation of adulteration in honey using a microwave planar resonator sensor.

A microwave microstrip line resonator sensor is developed as an alternative tool for detecting adulteration in honey. A honey-filled tube is placed at the position with the maximum electric field intensity. When the honey is adulterated, its permittivity is changed, leading to a distinct resonance frequency shift and enabling detection. Compared with the existing microwave sensors, this sensor offers the advantages of low cost, compact size, and easy fabrication. Moreover, quantitative analysis of the adulteration could be achieved. Electromagnetic simulation is performed using a co-simulation with CST and MATLAB. The simulation results reveal that the resonance frequency of the resonator decreases as the added water content increases, following a quadratic polynomial relationship. In the experiments, the results demonstrate a successive decrease in the resonance frequency from the empty tube, honey-filled tube to water-filled tube cases. Furthermore, honey samples with varying water contents (up to 70%) are tested, and the resonance frequency decreases with increasing added water content, which agrees well with the simulation results. In addition, there is a quadratic relationship between the two parameters. Principal component analysis is conducted on the transmission coefficients, and the first principal component decreases with increasing water content. With the addition of the second principal component, the cases of different water contents in honey can be well classified.

A split-ring resonator full/sparse planar array based on Chebyshev polynomial

A planar split-ring resonator (SRR) antenna full/sparse array, fed by a Chebyshev distribution, is proposed in this paper. Following the Yagi principle, the antenna element consists of SRRs and an I-shaped resonator. The inclusion of the I-shaped resonator enhances coupling, resulting in high gain. Additionally, a 14 × 13 Chebyshev planar antenna array, based on corporate feed, allows for a non-uniform amplitude distribution to suppress side lobes. The proposed Chebyshev planar array exhibits high gain characteristics and low side lobe levels (SLL) in both the E- and H-planes. For sidelobes suppression further, by utilizing a genetic algorithm, a planar sparse array is constructed based on the proposed Chebyshev array. The measured gain of the array at 10.1 GHz is 22.4 dBi, with SLL values of −20.4 dB and −17.5 dB in the E- and H-planes, respectively. These results meet the requirements for wireless communication.

Propagation modeling and guided waves in a ZnO piezoelectric planar resonator: open-circuit and short-circuit cases

This paper presents an application of Legendre polynomial approach to solve the wave propagation in a piezoelectric ZnO planar resonator subjected to stress-free boundary conditions and excited using two thin electrodes connected to an electrical source. The method is able to take into account the boundary conditions, the presence of electrical source and the different dissimilarities of the physical properties. Resonance frequencies of longitudinal modes are calculated in case of an open and short-circuit brunch. Dispersion characteristics are also calculated such as mechanical displacement and stress profiles for different resonance frequencies. The electromechanical coupling coefficient is also calculated.

Programmable nanophotonic planar resonator filter-absorber based on phase-change InSbTe

Reconfigurable plasmonic-photonic electromagnetic devices have been incessantly investigated for their great ability to optically modulate through external stimuli to meet today's emerging needs, with chalcogenide phase-change materials being promising candidates due to their remarkably unique electrical and optics, enabling new perspectives in recent photonic applications. In this work, we propose a reconfigurable resonator using planar layers of stacked ultrathin films based on Metal-dielectric-PCM, which we designed and analyzed numerically by the Finite Element Method (FEM). The structure is based on thin films of Gold (Au), aluminum oxide (Al2O3), and PCM (In3SbTe2) used as substrate. The modulation between the PCM phases (amorphous and crystalline) allows the alternation from the filter to the absorber structure in the infrared (IR) spectrum (1000–2500 nm), with an efficiency greater than 70% in both cases. The influence of the thickness of the material is also analyzed to verify tolerances for manufacturing errors and dynamically control the efficiency of transmittance and absorptance peaks. The physical mechanisms of field coupling and transmitted/absorbed power density are investigated. We also analyzed the effects on polarization angles for Transversal Electric (TE) and Transversal Magnetic (TM) polarized waves for both cases.

High-Temperature Superconducting Interconnects for Ultra-Low Temperature, High-Field Environments

Coplanar (with the ground) 20 cm long waveguides are manufactured from the YBCO-on-Kapton material. We inves-tigate the effect of parasitic ground plane resonances on the per-formance of these waveguides. It is concluded that dense rows stitching vias are essential for isolating the lines to a level below 60 dB at 6 GHz. We demonstrate a metalized via technology that is compatible with both the traditional Flexible Printed Circuit (FPC) process and the epitaxial YBCO material. Stitching via fence with the via period 10 mm is shown as effective in suppress-ing parasitic resonances at 77 K.

A Microwave Voyage into Swelling Phenomenon: Investigation of Polydimethylsiloxane and VOCs Interaction.

When exposed to specific gases, polymers undergo swelling, leading to physiochemical changes that can significantly affect their performance. Monitoring this swelling phenomenon requires innovative approaches. This study focuses on investigating the real-time resonant microwave behavior of two polydimethylsiloxane (PDMS) structures (solid and porous) in interaction with tetrahydrofuran (THF) and acetone, which are primary swelling agents. A microwave measurement method is proposed using an 8.63 GHz planar split ring resonator (SRR). The device's resonant frequency downshifts to 7.75 and 8.42 GHz when solid and porous PDMS blocks are placed on the split ring gap. Interaction of the solid PDMS and porous PDMS with target gases caused a change in PDMS structure resulting in alterations in the dielectric properties of the PDMS/gas system, as evidenced by the resonator's transmission amplitude and resonant frequency shifts. The magnitude of these shifts depends on the type and concentration of the solvent gas. The PDMS-integrated SRR exhibits a sensitivity of 25.3 MHz/1 ppt THF and 7 MHz/1 ppt acetone. Additionally, the solid block demonstrates response times of 6800 and 4200 s for swelling and deswelling, respectively, when in exposure to 25 ppt concentrations of THF and acetone. Overall, this study underscores the substantial potential of microwave resonators as versatile tools for investigating the physical changes in polymers during their interaction with gases, contributing to the understanding of polymer-gas interactions and opening avenues for further research and diverse applications.

Impact of Boundary Conditions on Acoustic Excitation of Entropy Perturbations in a Bounded Volume of Newtonian Gas

Excitation of the entropy mode in the field of intense sound, that is, acoustic heating, is theoretically considered in this work. The dynamic equation for an excess density which specifies the entropy mode, has been obtained by means of the method of projections. It takes the form of the diffusion equation with an acoustic driving force which is quadratically nonlinear in the leading order. The diffusion coefficient is proportional to the thermal conduction, and the acoustic force is proportional to the total attenuation. Theoretical description of instantaneous heating allows to take into account aperiodic and impulsive sounds. Acoustic heating in a half-space and in a planar resonator is discussed. The aim of this study is to evaluate acoustic heating and determine the contribution of thermal conduction and mechanical viscosity in different boundary problems. The conclusions are drawn for the Dirichlet and Neumann boundary conditions. The instantaneous dynamic equation for variations in temperature, which specifies the entropy mode, is solved analytically for some types of acoustic exciters. The results show variation in temperature as a function of time and distance from the boundary for different boundary conditions.

High Quality Factor in Solution-Processed Inorganic Microcavities Embedding CsPbBr3 Perovskite Nanocrystals.

Optical microcavities grant manipulation over light-matter interactions and light propagation, enabling the fabrication of foundational optical and optoelectronic components. However, the materials used for high-performing systems, mostly bulk inorganics, are typically costly, and their processing is hardly scalable. In this work, we present an alternative way to fabricate planar optical resonators via solely solution processing while approaching the performances of conventional systems. Here, we couple fully solution-processed high dielectric contrast inorganic Bragg mirrors obtained by sol-gel deposition with the remarkable photoluminescence properties of CsPbBr3 perovskite nanocrystals. The approach yields microcavities with a quality factor of ∼220, which is a record value for solution-processed inorganic structures, and a strong emission redistribution resulting in a 3-fold directional intensity enhancement.

A METAMATERIAL INSPIRED SPLIT RING RESONATOR ACCOMPLISHED MULTIBAND ANTENNA FOR 5G AND OTHER WIRELESS APPLICATIONS

A multiband antenna is proposed in this paper, accomplished with a split ring resonator (SRR) in the ground plane for portable and wireless applications. The rectangular radiator is unified with a semi-circular stub improving the impedance matching in the antenna. Further, the radiator creates an optimized rectangular slot to obtain the multiband operation. The SRR in the ground plane demonstrates the metamaterial (MTM) characteristics that significantly improve the 10 dB impedance bandwidths (IBW) and enhance realized gain in the multi-band antenna. The proposed antenna is procuring the five 10 dB IBW, which can be prominent for RADAR (2.96 GHz - 3.06 GHz), 5G (3.92 GHz - 4.32 GHz and 4.64 GHz - 5.04 GHz), WLAN (5.32 GHz - 5.64 GHz) and ISM band (5.7 GHz - 6 GHz) applications. The gain enhancement is obtained in all operating bands of the antenna, and a maximum 5.24 dB gain is achieved at a 4.14 GHz frequency.

Millimetric Inclusion Detection Through a Contactless Microwave Spiral Sensor for Biomedical Applications

This article introduces the design and fabrication of a microwave contactless sensor used to detect the presence of millimetric inclusions in a biological medium for biomedical applications. The hardware system comprises a self-resonant planar spiral resonator (SR) (sensing element) inductively coupled to an external concentric single-loop probe (reading probe), working at 648 MHz. The microwave sensor configuration relies on the <inline-formula xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink"> <tex-math notation="LaTeX">${Q}$ </tex-math></inline-formula> -factor maximization of the spiral coil, that is, the sensing element, through an optimization process, to obtain a stronger sensitivity and, thus, a millimeter resolution for the inclusions’ detection. The detection is achieved by recording both the amplitude variation and the frequency shift of the input impedance of the reading probe. To validate the proposed solution, full-wave simulations have been performed to design and preliminary evaluate the radiating system performance in detecting millimetric biological inclusions. As an applicative example, we focus on air bubbles detection in hemodialysis procedures; in particular, we carried out the experimental verification by employing an agar phantom to replicate the dielectric characteristics of the blood tissue and polylactic acid (PLA) samples of various sizes to represent the air inclusions. We proved that the theoretical assumptions were in excellent agreement with both the numerical and experimental results, encouraging further analysis of the potential use of such sensors in biomedical applications. Indeed, the radiating device can be very helpful for all operations where it is necessary to detect the presence of undesired and dangerous contaminants in a contactless way, making the procedure safer for patients.