Photogenerated Electron-hole Pairs Research Articles

Synthesis of Self-Assembled Mesoporous ZnO Microspheres Designed for Microwave-Assisted Photocatalytic Degradation of Tetracycline.

Microwave-assisted photocatalysis offers a novel approach for degrading antibiotics, while the mechanism of enhancement of microwave-induced photocatalysis remains poorly understood. In this study, tetracycline (TC) was degraded using the method of microwave-assisted photocatalysis with a ZnO catalyst, which was synthesized by the combination of hydrothermal and calcination methods. The self-assembled mesoporous ZnO catalyst exhibited superior catalytic activity in degrading TC. It is found that the degradation efficiency of TC by the ZnO catalysts with microwave-assisted photocatalysis is 4.27 times higher than that of photocatalysis alone. Of particular significance, we found that the optical absorption range of ZnO increased and the band gap decreased when microwave was introduced into the photocatalytic system. Semi-in situ photochemical tests demonstrated that more photogenerated electron-hole pairs were detected under microwave, thus further improving the photocatalytic activity of ZnO. The separation efficiency and charge transfer efficiency of photogenerated electron-hole pairs also improved due to the increase of oxygen vacancies in the synergistic effect. Meanwhile, h+ and ·OH were the main active species in the degradation system. The mechanism of microwave-induced photocatalysis is illustrated, and an efficient way for degrading antibiotic is provided in this work.

Enhanced Photoelectrochemical Water Splitting of In2S3 Photoanodes by Surface Modulation with 2D MoS2 Nanosheets

Photoanodes with ample visible-light absorption and efficient photogenerated charge carrier dynamics expedite the actualization of high-efficiency photoelectrochemical water splitting (PEC-WS). Herein, we fabricated the heterojunction nanostructures of In2S3/MoS2 on indium-doped tin oxide glass substrates by indium sputtering and sulfurization, followed by the metal–organic chemical vapor deposition of 2D MoS2 nanosheets (NSs). The photocurrent density of In2S3/MoS2 was substantially enhanced and higher than those of pristine In2S3 and MoS2 NSs. This improvement is due to the MoS2 NSs extending the visible-light absorption range and the type-II heterojunction enhancing the separation and transfer of photogenerated electron–hole pairs. This work offers a promising avenue toward the development of an efficient photoanode for solar-driven PEC-WS.

Composites Based on Electrodeposited WO3 and TiO2 Nanoparticles for Photoelectrochemical Water Splitting

Photoelectrochemically active WO3 films were fabricated by electrodeposition from an acidic (pH 2), hydrogen-peroxide-containing electrolyte at −0.5 V vs. SCE. WO3-TiO2 composites were then synthesized under the same conditions, but with 0.2 g/L of anatase TiO2 nanoparticles (⌀ 36 nm), mechanically suspended in the solution by stirring. After synthesis, the films were annealed at 400 °C. Structural characterization by XRD showed that the WO3 films exhibit the crystalline structure of a non-stoichiometric hydrate, whereas, in WO3-TiO2, the WO3 phase was monoclinic. The oxidation of tungsten, as revealed by XPS, was W6+ for both materials. Ti was found to exist mainly as Ti4+ in the composite, with a weak Ti3+ signal. The efficiency of the WO3 films and composites as an oxygen evolution reaction (OER) photo-electrocatalyst was examined. The composite would generate approximately three times larger steady-state photocurrents at 1.2 V vs. SCE in a neutral 0.5 M Na2SO4 electrolyte compared to WO3 alone. The surface recombination of photogenerated electron–hole pairs was characterized by intensity-modulated photocurrent spectroscopy (IMPS). Photogenerated charge transfer efficiencies were calculated from the spectra, and at 1.2 V vs. SCE, were 86.6% for WO3 and 62% for WO3-TiO2. Therefore, the composite films suffered from relatively more surface recombination but generated larger photocurrents, which resulted in overall improved photoactivity.

High-Efficiency Photo-Assisted Large Current-Density Water Splitting with Mott-Schottky Heterojunctions.

The development of bifunctional photogenerated carrier-assisted electrocatalytic (PCA-EC) electrodes that operate with stability at large current-density remains a significant challenge. Herein, we demonstrate a simple sputtering-deposition process to synthesize a novel MnWO4/FeCoNi Mott-Schottky heterojunction coating and deposit it on a pure Ti substrate to prepare high-performance PCA-EC electrodes, which exhibits enhanced light absorption range/intensity and rapidly separated photogenerated electron-hole pairs. This design allows photogenerated electrons to directly participate in the hydrogen evolution reaction (HER), while the strong oxidation of photogenerated holes significantly reduces the defect formation energy of active metals, thereby facilitating the rapid reconstruction of highly active Ni(FeCo)OOH/MnOOH species for the oxygen evolution reaction (OER). As expected, the as-prepared electrode demonstrates the overpotentials of 64 mV for the HER and 204 mV for the OER at 10 mA cm-2 under illumination. Benefiting from the stable interface with Fe/Co/Ni-O-Mn/W bonding units, the dual-electrode photoassisted electrolytic cell achieves long-term stability at current densities of 500 and 1000 mA cm-2. This work provides detailed insights into the enhancement mechanism of PCA-EC and contributes to the development of photo-assisted water splitting electrodes for large current-density applications.

Microwave-Assisted Synthesis of CdS-MOF MIL-101 (Fe) Composite: Characterization and Photocatalytic Performance.

The present study outlines the synthesis of cadmium sulfide-metal-organic framework (CdS-MOF) MIL-101 (Fe) heterojunctions achieved via fast microwave-assisted reactions. Thus, different CdS-MOF MIL-101 (Fe) ratios were prepared to study their effectiveness as photocatalysts. These compounds were employed in the photocatalytic degradation of methylene blue (MB) under UV and visible irradiation. Structural, morphological, textural, compositional, and optical properties of the synthesized compounds determined by X-ray diffraction (XRD), scanning electron microscopy (SEM), X-ray photoelectron spectroscopy (XPS), UV-vis spectroscopy, Raman spectroscopy, and Fourier transform infrared (FTIR) spectroscopy were utilized to characterize the structural, morphological, textural, compositional, and optical properties. Electrochemical impedance spectroscopy (EIS) was also employed to determine photovoltage and photocurrent densities. The resulting valence band offset (Vfb) and band gap energy values were utilized to construct an energy band scheme. Our research revealed that the CdS-MOF MIL-101 (Fe) heterojunction enhances the efficiency of electron-hole pair separation, thereby mitigating charge carrier recombination effects. Moreover, the type I electronic band structure established an efficient reaction mechanism, effectively suppressing the recombination of photogenerated electron-hole pairs. The photocatalytic system demonstrated exceptional behavior, achieving complete MB removal within 30 min of reaction time and exhibiting outstanding stability and reusability after four reaction cycles. These findings highlight the potential of the synthesized compounds in the field of wastewater treatment for organic pollutants, offering a promising alternative to current environmental issues.

Construction of S-scheme g-C3N4/PbTiO3 heterojunction and its highly efficient photocatalytic degradation of organic pollutants under simulated sunlight.

This study successfully synthesized a composite photocatalyst g-C3N4/PbTiO3 through hydrothermal and calcination methods using PbTiO3 and g-C3N4. The catalyst was characterized by XRD, FTIR, Raman, XPS, SEM, TEM, UV-vis DRS, PL, and other techniques. The results indicate that the composite photocatalyst exhibits efficient electron transfer, enhanced light absorption, effective separation and utilization of photogenerated electron-hole pairs, demonstrating superior photocatalytic activity. Under simulated sunlight, the removal efficiency of methyl blue (MB) with an initial concentration of 10mg/L reaches 93.0% after 120min. After five cycles, the degradation efficiency of MB is 79.2%, still maintaining 85% of the initial catalytic activity. The pH values in the range of 4.0-7.0, inorganic anions, and water quality have a minimal impact on the photocatalytic degradation of MB. Additionally, the composite photocatalyst exhibits strong removal capabilities for other pollutants, such as tetracycline. Therefore, the prepared catalyst demonstrates good feasibility for practical applications. Free radical quenching experiments indicate that hydroxyl radicals (·OH) are the primary active groups in the photocatalytic degradation of MB. Based on this, a photocatalytic mechanism involving a S-scheme heterojunction has been proposed. This study provides new insights into preparing PbTiO3 composite semiconductors and constructing novel S-scheme heterojunctions.

Studies on Electronic Structure and Optical Properties of MoS2/X (X = WSe2, MoSe2, AlN, and ZnO) Heterojunction by First Principles

The single-layer MoS2 is a highly sought-after semiconductor material in the field of photoelectric performance due to its exceptional electron mobility and narrow bandgap. However, its photocatalytic efficiency is hindered by the rapid recombination rate of internal photogenerated electron–hole pairs. Currently, the construction of heterojunctions has been demonstrated to effectively mitigate the recombination rate of photogenerated electron–hole pairs. Therefore, this paper employs the first principles method to calculate and analyze the four heterojunctions formed by MoS2/WSe2, MoS2/MoSe2, MoS2/AlN, and MoS2/ZnO. The study demonstrates that the four heterojunctions exhibit structural stability. The construction of heterojunctions, as compared to a monolayer MoS2, leads to a reduction in the band gap, thereby lowering the electron transition barrier and enhancing the light absorption capacity of the materials. The four systems exhibit II-type heterojunction. Therefore, the construction of heterojunctions can effectively enhance the optical properties of these systems. By forming heterojunctions MoS2/WSe2 and MoS2/MoSe2, the absorption coefficient in the visible light region is significantly increased, resulting in a greater ability to respond to light compared to that of MoS2/ZnO and MoS2/AlN. Consequently, MoS2-based heterojunctions incorporating chalcogenide components WSe2 and MoSe2, respectively, exhibit superior catalytic activity compared to MoS2 heterojunctions incorporating non-chalcogenide components ZnO and AlN, respectively. The absorption spectrum analysis reveals that MoS2/MoSe2 exhibits the highest light responsivity among all investigated systems, indicating its superior photoelectric performance.

Z-scheme InVO4/ZnFe2O4 heterojunction for efficient photocatalytic nitrogen fixation

Given outstanding light absorption and utilization capabilities, narrow-bandgap semiconductors receive intensive interests in the photocatalysis field. However, the narrow bandgap is a double-edged sword, with the non-negligible charge carrier recombination and hinderance of redox reactions due to the limited redox capability. The construction of Z-scheme heterojunctions could address the aforementioned issues. In this work, we selected two band-matched narrow-bandgap semiconductor catalysts (InVO4 and ZnFe2O4) for the construction of a Z-scheme heterojunction. Compared with pure InVO4 and pure ZnFe2O4, the as-obtained InVO4/ZnFe2O4 Z-scheme heterojunction exhibited improved light harvesting capability and enhanced photogenerated electron-hole pair separation rate. The regulated energy band structure of as-formed InVO4/ZnFe2O4 Z-scheme heterojunction could accelerate the spatial separation of photogenerated electrons and holes, reduce the recombination probability, and provide sufficient electrons to participate in the nitrogen reduction, ultimately significantly promoting photocatalytic activity. Benefiting from above improvements, the NH3 yield of InVO4/ZnFe2O4 for photocatalytic nitrogen fixation was up to 453.37 μmol/gcat/h, which was about 17.7 times and 62.9 times higher than that of pure InVO4 and ZnFe2O4 samples, respectively. This study gives a promising guidance to the facile design and utilization of Z-scheme heterojunction composed of narrow-bandgap semiconductors.

Synthesis of a novel NiCo-LDH/Bi2WO6 Z-scheme heterojunction composite for photocatalytic degradation of tetracycline

This article aims at preparing of Z-scheme heterojunction NiCo-LDH/Bi2WO6 (LDH: layered double hydroxides) via a solvothermal technique, addressing the rapid recombination of electron-hole pairs caused by the narrow bandgap of Bi2WO6. Successful loading of NiCo-LDH onto Bi2WO6 was confirmed through various characterization techniques, assessing the composite's crystal structure, morphological traits, and performance. Notably, the NiCo-LDH/Bi2WO6 composite exhibited excellent photocatalytic performance in the degradation of tetracycline (TC), achieving an optimal reaction rate of 0.03 min−1, which is 4.8 times faster than that of Bi2WO6 alone. The findings demonstrate that the formation of the heterojunction structure facilitated the separation of photogenerated electron-hole pairs by reducing recombination in monomers. Free radical trapping experiments showcased that the decomposition of TC is primarily driven by h+ and ∙O2−. Additionally, liquid chromatography-mass spectrometry analysis identified the degradation products of TC and suggested two potential degradation pathways. The present research provides a novel approach for preparing LDH photocatalytic materials using NiCo-LDH/Bi2WO6.

Synthesis of a novel bismuth molybdite/iron oxide thin film for oxytetracycline degradation in a photoelectrocatalytic system

In this study, heterostructures based on Bismuth molybdite/iron oxide (Bi2MoO6/Fe2O3) thin films were fabricated by a dip-coating technique using precursor solutions. The heterostructures were deposited on fluorine-doped tin oxide glass substrates. From a detailed characterization using X-ray diffraction and X-ray photoelectron spectroscopy, the formation of the orthorhombic phase for Bi2MoO6 and the co-existence of hematite and maghemite in Fe2O3 was demonstrated. Meanwhile, the field emission scanning electron microscopy cross-section images confirm the formation of well-defined Bi2MoO6 film under the Fe2O3 deposition. The optical band gap energies for the heterostructure obtained were estimated from the diffuse reflectance spectra and ranged from 2.3 to 3.5 eV. Photoluminescence analysis revealed an improved separation and faster transfer of photogenerated electrons and holes for the Bi2MoO6/Fe2O3 (Het) film. The best oxytetracycline (OTC) removal percentage through photoelectrocatalytic treatment was 96.85% using the Het. Besides, were carried out the variation of parameters which affect the OTC photoelectrocatalytic degradation as pH, potential applied, and scavenger assay. The 1O2 was the oxidant predominate, which attack the OTC ring to initiate and accelerate the degradation process. Based on the analysis of degradation intermediates and characteristics of Bi2MoO6/Fe2O3, possible degradation pathways and mechanisms of OTC were displayed. An enhancement of oxytetracycline degradation efficiency of Het fabricated compared to pristine oxides was achieved mainly due to avoid the charge recombination of photogenerated electron-hole pairs provided by Direct Z-scheme heterostructure. Finally, the Het fabricated represents a promising material for efficient and sustainable pharmaceutical removal applications.

WO3@MOF heterostructure in-situ transformed and deposited on La-Bi2WO6-BiFeWOx composite with enhanced photocatalytic performance for degradation of harmful and toxic substances produced by tobacco

Nowadays, tobacco is widely cultivated, and there are millions of people who smoke around the world. The cultivation of tobacco, along with the handling of cigarettes and the consumption of tobacco products, can produce numerous harmful and toxic substances. Many researchers are working diligently to eliminate these harmful and toxic substances. However, the results have been minimal. In this paper, we successfully prepared a novel La-Bi2WO6-BiFeWOx-WO3@MOF using hydrothermal and in-situ transformation methods. All samples were thoroughly investigated using various characterization techniques, including XRD, SEM, TEM, XPS, UV–Vis absorption spectra, transient photocurrent responses, and electron spin resonance. Furthermore, La-Bi2WO6-BiFeWOx-WO3@MOF was utilized as a catalyst for the degradation of harmful and toxic substances produced by tobacco, including phenol, nicotine, benzopyrene, and nitrosamines. The results indicate that La-Bi2WO6-BiFeWOx-WO3@MOF exhibits efficient separation and transfer of photo-generated electron-hole pairs under visible light irradiation. La-Bi2WO6-BiFeWOx-WO3@MOF also exhibits excellent photocatalytic activity, efficiently degrading phenol (98.62%), nicotine (92.41%), benzopyrene (81.74%), and nitrosamine (98.23%). Furthermore, the effects of varying catalyst dosage, phenol concentration, and pH values, as well as the degradation of nicotine, benzopyrene, and nitrosamine by La-Bi2WO6-BiFeWOx-WO3@MOF, were also investigated. The main active radicals are ·OH and ·O2– during the degradation process. Finally, a potential degradation mechanism for phenol, nicotine, benzopyrene, and nitrosamine by La-Bi2WO6-BiFeWOx-WO3@MOF is proposed.

Vacancy-Induced Symmetry Breaking in Titanium Dioxide Boosts the Photocatalytic Hydrogen Production from Methanol Aqueous Solution.

The key to optimizing photocatalysts lies in the efficient separation and oriented migration of the photogenerated carriers. Herein, we report that breaking continuous TiO6 tetragonal (D4h) symmetry in titanium dioxide material by oxygen vacancy engineering could induce a dipole field within the bulk phase and thus facilitate the separation and transfer of photogenerated electron-hole pairs. After further loading of Cu single-atom co-catalysts, the obtained catalyst attained a hydrogen (H2) yield rate of 15.84 mmol g-1 h-1 and a remarkable apparent quantum yield of 12.67% at 385 nm from methanol aqueous solution. This catalyst also demonstrated impressive stability for at least 24 h during the photocatalytic tests. The innovative concept of producing dipole fields in semiconductors by breaking the crystal symmetry offers a new perspective for designing photocatalysts.

Visible-light-driven photocatalytic for degrading tetracycline wastewater by BiOI/Bi2O3 Z-scheme heterojunction

Direct Z-scheme heterojunctions can exhibit enhanced redox capacity in redox reactions compared to conventional heterojunctions. In this study, BiOI/Bi2O3 Z-scheme heterojunctions were synthesized by a facile co-precipitation and calcination method using BiOI as a precursor, and its photocatalytic activity was investigated by degrading tetracycline antibiotics in aqueous environment. Under visible light, the degradation efficiency of tetracycline reached 80.01% and the photocatalytic degradation rate constant reached 0.0116min-1 when the molar ratio of Bi and I in BiOI/Bi2O3 composites was 1:1, which were 2.8 and 4.8 times higher than that of pristine BiOI (0.0041min-1) and Bi2O3 (0.0024min-1), respectively. The heterojunctions exposed excellent stability that maintained at 78.80% after four cyclic tests. The ascendant photocatalytic performance can be attributed to the formation of direct Z-scheme heterojunctions, which improves the separation and transfer efficiency of the photogenerated electron-hole pairs, and ·O2- is the main active substance in the degradation process. This research provides a green and convenient method for preparing photocatalytic heterojunctions, which is conducive to promoting the development of photocatalytic degradation of refractory pollutants under visible light.

Facile preparation of Co-doped ZnIn2S4 nanosheets for highly efficient photocatalytic hydrogen peroxide production

Utilizing solar energy to produce hydrogen peroxide from oxygen and water offers an appealing and sustainable approach. In this work, Co-doped ZnIn2S4 nanosheets were effectively synthesized through a chemical precipitation method, and the morphological structure, band structure and pathways for hydrogen peroxide production were investigated. The results indicate that Co doping significantly enhances the photocatalytic efficiency of ZnIn2S4 in producing hydrogen peroxide. The sample with the 2% doping concentration exhibited the highest rate, with a detected hydrogen peroxide concentration of 535.53µM in the solution after 100minutes of exposure to visible light, which is 4.29-fold higher than that of undoped ZnIn2S4. Further analysis revealed that the improved performance mainly originated from better spectral response, faster photogenerated carrier transport, and lower recombination frequency of photogenerated electron-hole pairs.

Bionic Leaf: Ultrahigh energy efficiency in a defect Engineered MoS2 based photo induced charging of flexible Zn-Air battery

Introducing solar energy directly into flexible energy storage systems is an environmentally friendly, efficient, and low-cost strategy. Herein, we constructed a photoelectrode based on flexible carbon cloth (CC) to promote the oxygen evolution reaction (OER) and effectively reduce the charging voltage of flexible zinc-air batteries (ZABs), inspired by the photosynthesis process in leaves. The implementation of sulfur vacancies (VS) and oxygen doping in nanoscale molybdenum disulfide (MoS2) effectively enhances the separation efficiency of photo-generated electron-hole pairs, and adjusts its band structure to improve the oxidation capability. The constructed photocathode with defect-rich MoS2 (D-MoS2) exhibits a low overpotential of 235 mV at 10 mA cm−2 for OER. The sandwich flexible ZABs based on D-MoS2 achieve a low charge voltage around 1.3 V and an ultra-high energy efficiency greater than 90 % under illumination at 0.1 mA cm−2. This strategy provides a new insight for the application of light energy in smart wearable energy storage devices.

In Situ Construction of SnS2@SnO2 Heterostructure for Photo-Assisted Electrocatalysis of Oxygen Evolution Reaction.

Photo-assisted electrocatalysis has arisen as a promising approach for hydrogen generation by incorporating photocatalysts into electrocatalysts. 2D SnS2 is a photocatalyst that absorbs visible light. However, the rapid recombination of photo-generated electron-hole pairs significantly reduces the overall photocatalytic efficiency of SnS2, limiting its practical application. Thus, this study prepares an in situ heterojunction SnS2@SnO2 using a one-step hydrothermal method. The degradation efficiency of methyl orange (MO) using SnS2@SnO2 is measured, achieving a degradation rate of 92.75% within 1h, which is 1.9 times higher than that of pure SnS2. Additionally, FeNiS/SnS2@SnO2 is synthesized and exhibited significant improvements in the photo-assisted oxygen evolution reaction (OER). It achieves an overpotential of 260mV and a Tafel slope of 65.1mVdec-1 at 10mAcm-2, showing reductions of 11.8% and 31.8%, respectively, compared to FeNiS alone. These enhancements highlight the strong photo-response capability of SnS2@SnO2. Under the internal electric field of SnS2@SnO2, the photogenerated electrons in the conduction band of SnS2 quickly move toward SnO2, facilitating efficient photocatalytic reactions. FeNiS, with a lower Fermi energy level (EF), facilitates electron transfer from SnS2@SnO2 and enhances OER performance by efficiently participating in the reaction. This study paves a new path for 2D photocatalyst materials.

Chiral Pd(II) Nanofiber Promoting Electron Transfer of g-C3N4 for Efficient Photocatalytic Hydrogen Production.

The rapid transfer and separation of photogenerated electrons is very important for the improvement of photocatalytic efficiency. Here, chiral induced spin selectivity effect (CISS effect) was developed to accelerate electron transfer for efficient photocatalytic hydrogen production. A chiral and achiral racemic supramolecular Pd(II) complex nanofiber was fabricated via supramolecular self-assembly of chiral L-Py or its racemes with Pd(II) and used to modify carbon nitride (g-C3N4). The obtained chiral photocatalyst L-Py-Pd/g-C3N4-4 and achiral photocatalyst Rac-Pd/g-C3N4-4, show enhanced photocatalytic activities with hydrogen evolution rates of 2476 and 1339 μmol g-1 h-1, respectively, while that of pure g-C3N4 is 30.5 μmol g-1 h-1. Chiral photocatalyst has 85% higher activity than achiral one and is 82.5-fold of pure g-C3N4, due to better suppression of the recombination of photogenerated electron-hole pairs in the interface of g-C3N4 contact with chiral molecule. Spectral tests and photoelectrochemical tests proved that the chiral supramolecular Pd(II) complex can act both as an electron spin filter and hydrogen reduction catalytic center to enhance photocatalytic efficiency. This work offers a new route to facilitate electron transfer by the CISS effect for photocatalytic hydrogen evolution.

Fabrication of a novel Ag2S-ZnS/ZIF-8 hollow heterojunction by in-situ formation of Ag2S and ZnS on ZIF-8 with enhanced tetracycline degradation performance

Currently, antibiotics are extensively utilized in the pharmaceutical industry to assist humans and animals in combating various infectious diseases. The extensive use of various antibiotics enhances the quality of life. However, it can also have negative effects on the environment and human health, including water pollution and the rise of antibiotic-resistant microorganisms. To date, antibiotics have been detected in rivers, groundwater, and even drinking water. There is an urgent need to design and develop advanced materials for the remediation of antibiotics present in our environment. In this paper, we successfully synthesized a novel Ag2S-ZnS/ZIF-8 hollow heterojunction via facile sulphuration and solvothermal methods. This heterojunction was employed as a catalyst for the degradation of tetracycline (TC) in water under UV and visible light irradiation. The physicochemical properties of the as-synthesized catalysts were thoroughly analyzed using XRD, EDS, SEM, BET, XPS, TEM, ESR, UV–vis techniques. The results demonstrate that Ag2S-ZnS/ZIF-8 displays enhanced photocatalytic activity for TC degradation no matter under visible or UV light irradiation. After 10 min of UV light irradiation, its photocatalytic degradation efficiency was achieved 92.74 %. Additionally, Ag2S-ZnS/ZIF-8 was able to degrade 92.14 % of TC (visible light, with 35 min). The corresponding kinetic rate constant of Ag2S-ZnS/ZIF-8 is 0.145 min−1 (UV light) and 0.043 min−1 (visible light), respectively. Furthermore, Ag2S-ZnS/ZIF-8 also shown excellent stability for the degradation of TC in the presence of visible light. This is a result of its high specific surface area, superior photocurrent and efficient separation of photo-generated electrons-hole pairs. Apart from this, the photocatalytic degradation mechanism of TC over Ag2S-ZnS/ZIF-8 is discussed in detail.

Characterisation Analysis of Sulphur and Phosphorous Doped and Co-doped Graphitic Carbon Nitride (g-C3N4) Materials

Graphitic carbon nitride (g-C3N4) is tailored with doping of different non-metals (Sulphur and Phosphorus). For synthesis through thermal condensation method, the mixtures of urea and dopant with diverse concentrations have been added for preparation of materials. The basic effect of doping and its concentration on the structural morphology and absorption spectra of the samples is investigated in detail. Pure g-C3N4 suffers from high recombination rate of photogenerated electron-hole pairs resulting in low photocatalytic activity. Different techniques like X-ray diffraction (XRD), Scanning electron microscopy (SEM), Fourier transforms infrared (FTIR) spectroscopy, and Photoluminescence spectroscopy (PL) have been used for the characterization. X-ray diffraction studies confirm the formation of the g-C3N4 structure and SEM images reveal crumpled sheets and irregular plate like shapes of the doped graphitic nitride samples. FTIR analysis identify the presence of surface amino (N-H) and water (O-H) groups, cyano terminal group (C≡N), (C≡C), C–N) and (C=N) bonds and breathing mode of the tri-s-triazine units in the samples. PL spectra shows that the sulphur and phosphorus co-doped PSGCN (8 wt.%) sample is better for photocatalytic activity.

Dual-Mode Semiconductor Device Enabling Optoelectronic Detection and Neuromorphic Processing with Extended Spectral Responsivity.

High-performance semiconductor devices capable of multiple functions are pivotal in meeting the challenges of miniaturization and integration in advanced technologies. Despite the inherent difficulties of incorporating dual functionality within a single device, a high-performance, dual-mode device is reported. This device integrates an ultra-thin Al2O3 passivation layer with a PbS/Si hybrid heterojunction, which can simultaneously enable optoelectronic detection and neuromorphic operation. In mode 1, the device efficiently separates photo-generated electron-hole pairs, exhibiting an ultra-wide spectral response from ultraviolet (265nm) to near-infrared (1650nm) wavelengths. It also reproduces high-quality images of 256×256 pixels, achieving a Q-value as low as 0.00437µWcm- 2 at a light intensity of 8.58µWcm- 2. Meanwhile, when in mode 2, the as-assembled device with typical persistent photoconductivity (PPC) behavior can act as a neuromorphic device, which can achieve 96.5% accuracy in classifying standard digits underscoring its efficacy in temporal information processing. It is believed that the present dual-function devices potentially advance the multifunctionality and miniaturization of chips for intelligence applications.