Permeation Enhancers Research Articles

Current research status and application prospects of permeability and mechanical properties of pervious concrete

Permeable concrete, characterized by continuous porosity, offers excellent properties such as breathability, water permeability, sound absorption, water purification, and environmental enhancement. This paper comprehensively reviews previous research on permeable concrete, encompassing studies on mix design, workability, mechanical properties, drainage performance, sound absorption, and durability. It also discusses improvement measures and application prospects. Research indicates that the performance of permeable concrete is influenced by factors such as mix design, material composition, and construction techniques. Optimizing mix design, modifying material composition, and enhancing workability and mechanical properties can further improve the performance of permeable concrete. Permeable concrete shows broad application prospects in road engineering, landscaping, and environmental engineering, but further research and standardization are needed to support its widespread adoption.

Unveiling the science behind erectile dysfunction topical therapy: investigating transdermal papaverine as a novel treatment approach.

Erectile dysfunction is among the most prevalent urologic issues affecting men globally and is characterized by a high incidence rate. This condition significantly affects the quality of life of patients and their sexual partners. Due to the interactions, contraindications, and side effects associated with systemic drugs, recent research has increasingly focused on topical and transdermal medications for the treatment of erectile dysfunction. Based on previous studies, this article examines papaverine in terms of local effectiveness, methods of increasing therapeutic efficiency, possible local side effects, and evaluation of its various formulations. Among these approaches, notable strategies include using novel formulations and nanoformulations as compared with classic ones, employing permeation enhancers, and combining treatments with other oral and topical drugs with synergistic mechanisms. These methods aim to improve transdermal papaverine's bioavailability and therapeutic efficacy while minimizing side effects and enhancing patient compliance. Transdermal papaverine may not be as effective as its injectable form, but the treatment path is more pleasant, with less pain and fewer side effects for patients. For this reason, using solutions that remove the penile skin and fascial absorption barrier can be very effective.

Development of mucoadhesive 3D-printed Carbopol/Eudragit/SNAC tablets for the oral delivery of enoxaparin: In vitro and ex vivo evaluation

3D-printed dosage forms comprised of Carbopol and Eudragit were fabricated through semi-solid extrusion, combining Enoxaparin (Enox) and the permeation enhancer SNAC in a single-step process without subsequent post-processing. Inks were characterized using rheology and Fourier-transform infrared (FTIR) spectroscopy. The stability of Enox in the fabricated dosage forms was assessed by means of Nuclear Magnetic Resonance (NMR) and Circular Dichroism (CD) analysis. In vitro release studies revealed the release of Enox in a sustained manner, whereas ex vivo experiments demonstrated the mucoadhesive properties of the 3D-printed dosage forms and their ability to enhance Enox permeability across intestinal mucosa. Cellular assays (CCK-8 assay) revealed a dose- and time-dependent response following incubation with the 3D-printed dosage forms. The encapsulation of SNAC in the 3D-printed dosage forms demonstrated their capacity to increase the transcellularly transport of macromolecule across Caco-2 monolayer in a reversible manner, as confirmed by Transepithelial Resistance (TEER) measurements.

Revealing the mechanisms of water permeability enhancement of urban loess subgrades due to vibration application

Urban loess subgrades are affected by considerable vibrations from traffic, especially when the underground pipelines leak, and seepage under vibrations often causes road damage. However, the influence of vibrations on the water permeability of loess subgrades remains elusive. Here we address this issue by performing vibration-assisted permeability tests and scanning electron microscopy, mercury intrusion porosimetry, and suction–nuclear magnetic resonance measurements. This allowed the evolution of the saturated hydraulic conductivity (Ks), water-air migration, soil microstructure, and pore water forms to be evaluated. The water permeability of the loess subgrade is promoted by vibrations due to the increase in Ks, the acceleration of wet front migration, and the escape of entrapped air. Moreover, the value of Ks under vibration is 3–14 times greater than that without vibration, and the maximum increase occurs at a vibration frequency near the natural frequency of the loess. Furthermore, a theoretical framework of loess vibration permeability is proposed, and the mechanisms by which vibration accelerates the permeability behavior of the loess subgrade are revealed. Vibration promotes the expansion of soil pores, a decrease in the binding capacity of pore water, the mobilization of fine particles, and the formation of local low-permeability layer. Moreover, it accelerates the opening of entrapped air bubbles and the displacement of water-air, the reduction in seepage resistance. Thus, seepage water flows rapidly along infiltration channels. These findings are highly important for the road safety performance and the sustainable development of the traffic environment in loess regions.

Formulation and investigation of differently charged β-cyclodextrin-based meloxicam potassium containing nasal powders

Nasal systemic drug delivery may provide an easy way to substitute parenteral or oral dosing, however, the excipients have an important role in nasal formulations to increase the permeability of the mucosa and prolong the residence time of the drug. In this work, we aimed to produce meloxicam potassium monohydrate (MXP) containing nasal powders by a nano spray drier with the use of a neutral, an anionic and a cationic β-cyclodextrin as permeation enhancers, and (polyvinyl)alcohol (PVA) as a water soluble polymer. The following examinations were performed in order to study the effect of the applied excipients on the nasal applicability of the formulations: laser scattering, scanning electron microscope measurement, XRPD, DSC and FTIR measurements, adhesivity, in vitro drug release and permeability tests through an artificial membrane and RPMI 2650 cells. Based on our results, spherical particles were prepared with a size of 1.89–2.21 µm in which MXP was present in an amorphous state. Secondary interactions were formed between the excipients and the drug. The charged cyclodextrin-based formulations showed significantly higher adhesive force values regardless of the presence of PVA. The drug release was fast and complete. The passive diffusion of MXP was influenced not only by the charge of the cyclodextrin, but the presence of PVA, too. The permeation of the drug was enhanced in the presence of the anionic cyclodextrin testing it on RPMI 2650 cell model.

Corticosteroid-loaded chitosan-based in-situ forming gel combined with microneedle technology for improvement of burn eschar wound healing

Burn is one of the most common skin injuries and accounts for 300,000 deaths annually. Debridement and antibiotic therapy are major burn treatments, however, as debridement is not always possible and many drugs have poor penetration into necrotic tissue, permeation enhancement is acquired. Another challenge is the short duration of topically applied drugs. This study aims to address both problems by combining in-situ forming gels and microneedles.A chitosan-based in-situ forming gel of hydrocortisone was applied to human burn eschar using microneedles. The formulation was optimized using Design-Expert software. Formulation characterization was done in terms of gelling time and temperature, thermal analysis, release phenomenon, rheology, texture analysis, and stability. Finally, animal studies on mice burn wound treatment were conducted. Results showed that optimized formulation controlled the drug release, and wherever microneedle was used, drug permeation and flux increased (P-value < 0.05). In all ex-vivo and in-vivo stages, gel plus microneedle (length of 1.5 mm and application mode of 2) produced the best results concerning increased flux and faster recovery of burn eschar. In conclusion, the in-situ forming gel with appropriate texture, quality, and stability in combination with microneedle can be a good candidate for the controlled release of drugs in third-degree burn eschars.

Effects and Action Mode of Oleic Acid and Azone on Release and Penetration Process of Levothyroxine Sodium Patches.

In recent years, there has been a significant increase in the prevalence of thyroid diseases, particularly hypothyroidism. In this study, we investigated the impact and mechanisms of Chemical permeation enhancement(CPE) on transdermal permeation of levothyroxine sodium (L-T4) patches.We found that the combination of oleic acid (OA) and Azone (NZ) yielded the best transdermal permeation effect for L-T4.Subsequently, we also investigated the relevant propermeability mechanism.The results demonstrate that the combined application of OA and NZ significantly enhances the transdermal permeation of L-T4 compared to individual applications,it is attributed to two mechanisms: firstly, OA improves drug release by increasing the flowability of the pressure-sensitive adhesive (PSA) matrix; secondly, both OA and NZ act on the stratum corneum, especially facilitating L-T4 permeation through the hair follicle pathway. No skin irritation or cytotoxicity is observed with these final patches, which exhibit a remarkable therapeutic effect on hypothyroidism. this study contributes to the development of transdermal formulations of L-T4.

Effect of Wettability and Permeability on Pore-Scale of CH4–Water Two-Phase Displacement Behavior in the Phase Field Model

Hydraulic measures such as hydraulic slotting and hydraulic fracturing are commonly used in coal seam pressure relief and permeability enhancement. Two-phase flow patterns of CH4–water in pore-sized coal seams after hydraulic measures are critical to improve gas extraction efficiency. The phase field module in COMSOL Multiphysics™ 5.4 and the classical ordered porous media model were used in this paper. The characteristics of CH4–water two-phase immiscible displacement in coal seams under different capillary numbers (Ca) and viscosity ratios (M) were simulated and quantitatively analyzed. By changing the contact angle of the porous media, the flow patterns of CH4–water two-phase in coal with different wettability were simulated. Results show that wettability significantly affects the displacement efficiency of CH4. Additionally, by constructing a dual-permeability model to simulate the varying local permeability of the coal, the flow patterns of different Ca and M in dual-permeability media were further investigated. It is found that CH4 preferentially invades high-permeability regions, and the displacement efficiency in low-permeability regions increases with higher Ca and M, providing a reference for gas extraction from coal seams after hydraulic measures.

A Study on the Effect of Different Charge Structures on the Permeability Enhancement of Coal Seam Blasting

With the increasing depth of coal mining, the ground stress of coal seams rises, the gas content rises, and the permeability decreases, which is unfavorable to gas extraction and increases the possibility of gas accidents in coal mines. Blasting technology is often used to improve the permeability of coal seams and increase the effect of gas extraction, but it is difficult to control the blasting effect of ordinary flux coils, and the direction of the fissure and the degree of development of randomness, so it is important to study the effect of different flux coil structures on the blasting of coal seams to increase the permeability of the coal seam, in this paper, first of all, through the numerical simulation to analyze the effect of the blasting of the ordinary structure flux coils and the fissure change in the polygonal structure flux coils, and then make the experimental module. Then, we make the test module, build the test platform, and analyze the effect of blasting penetration of different drug coil structures by comparing the strain after blasting and the change in resistivity before and after blasting of two kinds of drug coil structures, and the results show that the polymerized drug coil can play the role of directional fracturing, and compared with the ordinary structure of the drug coil, the polymerized drug shows a better effect of fracturing and penetration increase.

A Review on Topical Gels as Drug Delivery System

The skin serves as a formidable barrier to drug penetration, primarily due to the stratum corneum. For successful transdermal drug delivery, the drug must overcome this barrier and reach the target site in sufficient concentrations. Drug molecules can penetrate the skin via the transcellular, intercellular, and appendageal pathways. The extent of drug permeation is influenced by factors such as the physicochemical properties of the drug, the nature of the vehicle, and the condition of the skin. Gels, being hydrophilic, can enhance drug permeation by increasing the hydration of the stratum corneum. Permeation enhancers, which reversibly alter the structure of the stratum corneum, can also improve drug permeation. Recent advancements in topical gel drug delivery include the use of nanotechnology, stimuli-responsive gels, combination therapy, natural polymers, and biodegradable materials. The delivery of biomolecules through the skin remains a challenge, and strategies such as iontophoresis, microneedles, and nanocarriers are being investigated. 3D printing technology enables the personalized fabrication of gels with precise drug dosing and customized release profiles. Despite significant advancements, challenges such as limited drug permeability, potential for skin irritation, and the need for long-term stability studies persist. Future research should focus on developing innovative strategies to overcome these challenges and optimize the performance of topical gels, involving the exploration of new drug-polymer combinations, advanced drug delivery technologies, and in silico modeling tools

Association of VEGFA polymorphisms with the risk of oesophageal cancer in Punjab, India: A case-control study.

Background & objectives Vascular endothelial growth factor (VEGF) is one of the most important angiogenic factors which stimulates tumour progression induction of endothelial cell migration and division, inhibition of the apoptosis of endothelial cells, induction of serine protease activity and enhancement of vascular permeability. This study aimed to investigate the correlation of VEGF+405G/C,-7C/T and+936C/T polymorphisms with oesophageal cancer risk. Methods DNA samples of 464 subjects (231 sporadic oesophageal cancer affected individuals and 233 controls) were genotyped forVEGF+936C/T,+405G/C and-7C/T polymorphisms. VEGF+936C/T and +405G/C polymorphisms were genotyped by PCR-RFLP method whereas VEGF-7C/T polymorphism was genotyped using Amplification refractory mutation system-polymerase chain reaction (ARMS-PCR). Results CT genotype of VEGF-7C/T polymorphism was significantly associated with reduced risk of oesophageal cancer. VEGF-7C/T polymorphism was significantly associated with reduced risk of oesophageal cancer underdominant, co-dominant, over dominant and log-additive genetic models in total patients and in the female group. C+936G+405T-7 haplotype was significantly associated with decreased risk (P=0.01)of oesophageal cancer in total patients and also in the male group (P=0.02). Interpretation & conclusions In future, replication of the findings of the present study in a larger sample from different ethnic groups, along with functional analysis, may be insightful for the role of VEGFA polymorphisms in the pathogenesis of oesophageal cancer. Identification of the correlation of VEGF variants with specific therapy in oesophageal cancer may help in better selection of patients and monitoring treatment response in VEGF-therapy.

The synergistic effect of biosynthesized CuONPs and phage (ϕPB2) as a novel approach for controlling Ralstonia solanacearum

BackgroundAs a vital soil-borne pathogenic bacterium, Ralstonia solanacearum can cause wilt disease in multiple Solanaceae plants. Several phages, such as ϕPB2, could infect R. solanacearum acting as a potential biological control agent in soil. In addition, some nanoparticles, especially copper preparation, also showed high toxicity on R. solanacearum with low toxicity on plant. However, whether they can be administered in combination and how effective they are in inhibiting the plant disease caused by R. solanacearum is known very little.ResultsIn this work, the characterization of CuONPs using scanning electron microscope, transmission electron microscope, X-ray photoelectron spectroscopy, Fourier transform infrared spectroscopy, and X-ray diffraction ascertained the presence of CuONPs which were nanometer particle of 83 nm. Then it was found that combined application of CuONPs with phage (ϕPB2) was superior to that of ϕPB2 or CuONPs alone in controlling tobacco bacterial wilt, with the CuONPs (250 mg/mL) and phage (106 PFU/mL) ratio being the best, at 79.1%. The combination of CuONPs and ϕPB2 also showed no obvious toxicity on tobacco growth than control like single application of CuONPs or ϕPB2. Furthermore, the transcriptome changes of R. solanacearum analysis indicated that the combination application and single allocation of CuONPs could inhibit “biofilm formation”, molecular function, biological processes, cellular components, metabolic process, and so on. In addition, the combination application showed higher inhibition of motility and biofilm, and better enhancement of cell membrane permeability, protein leakage, MDA concentration, and enzyme activity of their respiratory chain dehydrogenase than single application of CuONPs or phage (ϕPB2). Transcriptomes analysis also supported that the addition of ϕPB2 enhanced the toxicity of CuONPs by influencing the ABC transporters and quorum sensing, metabolic processes, and cellular biosynthetic processes of R. solanacearum.ConclusionIn total, our work not only proposed a novel way to increase the bactericidal effect of nanomaterials by adding phage, but also discovered the influence, synergistic effects, and mechanisms, which is useful to design novel way to combat phytopathogenic bacteria in the complicated environment.Graphical abstract

Nickel-induced oxidative stress and phospholipid remodeling in cucumber leaves

Nickel phytotoxicity has been attributed, among others, to oxidative stress. However, little is known about Ni-induced phospholipid modifications, including the oxidative ones. Accumulation of reactive oxygen species (ROS), antioxidative enzyme activities, malondialdehyde and the early lipid oxidation products contents, membrane permeability, phospholipid profile as well as phospholipid unsaturation degree were studied in the 1st and the 2nd leaves of hydroponically grown cucumber seedlings subjected to Ni stress. Compared to the 2nd leaf the 1st one showed stronger visual Ni toxicity symptoms, higher Ni, O2.- and H2O2 accumulation as well as greater enhancement in membrane permeability. Enzyme activities were differently influenced by Ni stress, however most pronounced changes were generally found in the 1st leaf. Ni treatment resulted in oxidation of leaf lipids, which was evidenced by appearance of increased contents of MDA and the early produced oxylipins. Among the latter 9-hydroxyoctadecatrienoic acid (9-HOTrE) and 13-hydroxyoctadecatrienoic acid (13-HOTrE) contents showed the most pronounced increase in response to Ni treatment. Exposure to the metal led to the changes in the leaf phospholipid profile and increased degree of phospholipid unsaturation. The obtained results have been discussed in relation to the difference in Ni stress severity between the 1st and the 2nd leaves.

Contribution of chemical permeation enhancers to the process of transdermal drug delivery: Adsorption, microscopic interactions, and mechanism

Transdermal drug delivery (TDD) has attracted widespread attention because of the advantage of its non-invasive nature, easy self-administration, and low side effects. The key to this pathway of drug delivery is how to overcome the barrier of the lipid matrix in the stratum corneum (SC). In this work, molecular dynamics (MD) were employed to investigate the adsorption of thyrotropin-releasing hormone (TRH) on the SC, and the effects of three different chemical permeation enhancers (ethanol (ETOH), carveol (CAV), and borneol (BOR)) on the SC were analyzed. The results showed that ETOH hardly altered the order of lipids in the SC, while CAV and BOR disrupted the morphology of the SC. The primary target of CAV was the CHOL in SC, which not only disrupted the ordered arrangement of CHOL, but also “extracted” CHOL from SC. The thickness distribution of SC became more inhomogeneous in the presence of CAV and BOR, which facilitated the penetration of drug molecules. Compared to no chemical permeation enhancers, the free energy of permeation in the presence of chemical permeation enhancers was less than 4–10 kcal mol−1, which suggested that chemical permeation enhancers were more favorable for the permeation of drugs from viewpoints of thermodynamics. All the results provided theoretical insights into the effect of chemical permeation enhancers on the transdermal permeation of drugs.

The bactericidal effect of punicalagin concentrations, high pressure conditions and their combination on Escherichia coli O157: H7

Punicalagin (PUN), as a natural antimicrobial agent, is the most abundant phenolic compound in pomegranate peel. In this study, the bactericidal effect of PUN concentrations, high pressure conditions and their combination on E. coli O157: H7 were investigated. The bacteria were suspended in physiological saline solution with PUN concentrations of 1–3 mg/mL and treated by high pressures of 100–300 MPa for 2–10 min. The synergistic effect of the combination treatment was demonstrated with the maximum enhancement value of 4.10. Cell morphology changes, membrane permeability enhancement and swimming motility inhibition were observed in the combination treatment. Adenosine, adenine, cyclic GMP in purine metabolism and glutathione in glutathione metabolism pathways were differential metabolites with content changes, which were related with treatment methods (HPP or PUN) but not the degree of bacteria inactivation. This study provided a more effective and innovative method for killing E. coli in simulation system. Industrial relevanceHPP was the most commercialized emerging non-thermal processing technology and PUN was the natural antibacterial agent from pomegranate peel waste. The combination of HPP and PUN had synergistic bactericidal effect on E. coli with less processing intensity, which was very suitable for the products those contained thermosensitive components with maximum sensory characteristics preserved and less preservative added.

Post-failure deformation mode switching in volcanic rock.

Beyond a threshold applied compressive stress, porous rocks typically undergo either dilatant or compactant inelastic deformation and the response of their physical properties to deformation mode is key to mass transport, heat transport and pressure evolution in crustal systems. Transitions in failure modes-involving switches between dilatancy and compaction-have also been observed, but to date have received little attention. Here, we perform a series of targeted mechanical deformation experiments on porous andesites, designed to elucidate complex post-failure deformation behaviour. By investigating a sample suite and effective pressure range that straddles the transition between positive and negative volumetric responses to compression, we show two post-failure critical stress states: a transition from compaction to dilation ( ), and a transition from dilation to compaction, which we term . We demonstrate that multiple switches in deformation mode can be driven by stress application under conditions relevant to the shallow crust. While the effect on fluid flow properties of compaction-to-dilation switching may be masked by a net reduction in sample porosity, samples that underwent dilatant-to-compactant failure mode switching exhibited an increase in permeability of approximately two orders of magnitude, despite only slight net volumetric change. Such a substantial permeability enhancement underscores the importance of post-failure deformation in influencing solute and heat transfer in the crust, and the generation of supra-hydrostatic fluid pressures in volcanic environments.

Relating Hydro‐Mechanical and Elastodynamic Properties of Dynamically Stressed Tensile‐Fractured Rock in Relation to Applied Normal Stress, Fracture Aperture, and Contact Area

AbstractWe exploit nonlinear elastodynamic properties of fractured rock to probe the micro‐scale mechanics of fractures and understand the relation between fluid transport and fracture aperture under dynamic stressing. Experiments were conducted on rough, tensile‐fractured Westerly granite subject to triaxial stresses. We measure fracture permeability for steady‐state fluid flow with deionized water. Pore pressure oscillations are applied at amplitudes ranging from 0.2 to 1 MPa at 1 Hz frequency. During dynamic stressing we transmit ultrasonic signals through the fracture using an array of piezoelectric transducers (PZTs) to monitor evolution of interface properties. We examine the influence of fracture aperture and contact area by conducting measurements at effective normal stresses of 10–20 MPa. Additionally, the evolution of contact area with stress is characterized using pressure sensitive film. These experiments are conducted separately with the same fracture and map contact area at stresses from 9 to 21 MPa. The measurements are a proxy for “true” contact area for the fracture surface and we relate them to elastic properties using the calculated PZT sensor footprints via numerical modeling of Fresnel zones. We compare the elastodynamic response of the fracture using the stress‐induced changes in ultrasonic wave velocities for transmitter‐receiver pairs to image spatial variations in contact properties. We show that nonlinear elasticity and permeability enhancement decrease with increasing normal stress. Additionally, post‐oscillation wave velocity and permeability exhibit quick recoveries toward pre‐oscillation values. Estimates of fracture contact area (global and local) demonstrate that the elastodynamic and permeability responses are dominated by fracture topology.

Study on the damage and seepage characteristics of water-saturated coal by microwave cycling

To investigate the extent of damage and seepage characteristics of water-saturated coal samples after subjecting them to microwave cycling. The microwave equipment was used to process the coal samples by microwave cycling. The non-contact digital image processing technology and acoustic emission system were used to carry out the triaxial loading experimental study of the coal samples to obtain the mechanical parameter characteristics, energy evolution pattern, acoustic emission information and permeability characteristics of coal samples under different microwave cycle times. The results of the study show that: With the increase in the number of microwave cycles, dense grid-loaded cracks gradually appeared on the surface of the coal samples, the triaxial partial stresses of the coal samples decreased, and the strains also decreased, and the modulus of elasticity and Poisson’s ratio also decreased; In the densification stage stage, the dissipated energy is higher than the elastic energy, and as the elastic stage proceeds, the elastic energy gradually reverses to exceed the dissipated energy, and the total energy and elastic energy of the coal samples decrease with the increase in the number of cycles, and the dissipated energy rises; Coal samples produce a large number of fissures due to the increase in the number of microwave cycles, the more frequent the fissure activity during the loading process, the acoustic emission amplitude and ringing count scattering points all become dense with the increase in the number of cycles, and the data increase; Initial permeability, destructive permeability and average permeability were all increased, microwave treatment has a better effect of permeability enhancement, the permeability of the treated coal samples was changed from low permeability to medium permeability, and the permeability enhancement was the largest in 6 cycles, and the permeability was increased by 7.18 times. This article explores the damage condition of water-saturated coal samples under microwave cycling treatment. Then, it explores the effect of microwave cycling on the permeability enhancement of the coal body, which provides a new method for exploring the gas permeability enhancement and extraction of low-permeability coal samples underground.

Biomimetic interlayer brought unexpected enhancement in permeability and rejection of polyamide nanofiltration membrane

Construction of interlayer between porous substrate and polyamide (PA) layer has been proved to be an effective way in improving membrane separation performance by the regulation of membrane structure and chemical properties. In present study, biomimetic material—1,2-dioleoyl-sn-glycero-3-phosphoethanolamine (DOPE) lipid bilayer was selected to serve as the interlayer prepared by suction filtration due to its unique advantages such as smooth, continuous, uniform and hydrophilic surface. The results showed that DOPE interlayer effectively lowered the diffusion rate of piperazine (PIP) from membrane surface to organic phase and thus contributing to the thinner and smoother PA layer. The permeability of the interlayer-based PA membrane reached 35.9 L/m2·h·bar, which was 190 % higher than pure PA NF membranes. More important, the interlayer-based PA membrane exhibited excellent Na2SO4 rejection about 99.8 % accompanied by a good separation selectivity between univalent and bivalent ions. Besides, the interlayer-based PA membrane possessed good stability to the changes of operating pressure, concentration and pH of feed solution, and the long-term NF test. Meanwhile, it performed well in removing NTU, TOC, Mg2+ and SO42− in the treatment of surface water and showed its potential in the practical application. In all, the present work brought new interlayer material in fabricating high-performance NF membrane.

Current review on nail drug delivery system and their future perspectives

Human nails are not only beautiful and protective, but they may also be utilized as a vehicle for drug delivery, particularly in the treatment of nail disorders such as psoriasis and onychomycosis. Even though nails develop at a somewhat moderate rate, their highly keratinized structure presents unique opportunities and challenges for medication penetration. Achieving therapeutic doses might be difficult even with topical pharmaceutical delivery, which offers advantages like non-invasiveness and customized effect. Many physical and chemical methods, such as acid etching and permeation enhancers, have been studied to improve drug penetration. It has recently been demonstrated that nail lacquers have potential for effectively delivering medication through the nails. Nail anatomy, common nail diseases, nail medication administration methods, and the advantages and disadvantages of nail lacquers are all covered in this overview. In addition, it discusses factors influencing drug diffusion through nails, draws comparisons between topical nail lacquers and oral antifungal medications, and looks at recent studies and patents on the topic. Future prospects for transungual medicine administration are promising, thanks to innovations such as photodynamic therapy and water-based lacquers. To fully realize the promise of this distribution method, more research is necessary.