Osteogenic Response Research Articles

Abstract 13942: Circular RNA-HIPK3 Suppresses Aortic Valve Calcification by Dual Inhibition of the Wnt/β-catenin Pathway in Aortic Valve Interstitial Cells

Introduction: Calcific aortic valve disease (CAVD) has become an increasingly important worldwide medical problem without effective pharmacological intervention. Circular RNAs (circRNAs), a large class of non-coding RNAs, have been shown to play a critical role in the occurrence and progression of cardiovascular disease. However, the role of circRNAs in CAVD remains unclear. Methods and Results: High-throughput sequencing of circRNAs expression profiles in human calcified aortic valves and normal controls revealed that circRNA-HIPK3 (circHIPK3) was abundant in aortic valves but decreased in calcified aortic valves. Infecting the CAVD mouse model with adeno-associated virus subtype 9 expressing circHIPK3 (AAV9-circHIPK3) revealed that circHIPK3 overexpression reduced thickness and calcium deposition of the aortic valve leaflet in vivo . Gain- or loss-of-function experiments showed that circHIPK3 inhibited osteogenic responses in human aortic valve interstitial cells. MeRIP and RIP experiments showed that circHIPK3 enhanced the stability of suppressor of morphogenesis in genitalia 1 (SMG1) mRNA in an N6-methyladenosine (m 6 A)-dependent manner. Meanwhile, RNA pull-down and ChIP-Seq indicated that circHIPK3 increased the transcriptional activity of Chibby family member 1(CBY1) by promoting TATA-box binding protein-associated factor 15 (TAF15) intranuclear translocation. Furthermore, SMG1 and CBY1 negatively regulated the activity of Wnt/β-catenin pathway, and rescue experiments showed that circHIPK3 inhibited the Wnt/β-catenin pathway through increasing the expression of SMG1 and CBY1. Conclusions: Deficiency of circHIPK3 results in activation of the Wnt/β-catenin pathway and thereby induces aortic valve calcification. Exogenous circHIPK3 supplementation shows the ability to inhibit aortic valve thickening and calcification in vivo . Therefore, targeting circHIPK3 may be a potential strategy to prevent the development of CAVD.

Abstract 13265: Soluble Klotho Captures FGF23 to Mitigate Aortic Valve Inflammocalcification Associated With Chronic Kidney Disease

Calcific aortic valve disease (CAVD) is prevalent in the elderly people, particularly those with chronic kidney disease (CKD). Klotho (KL), an anti-aging protein, is expressed mainly in the kidney and the cardiovascular system as soluble and membrane forms. CKD patients have reduced levels of KL and increased levels of fibroblast growth factor 23 (FGF23), a pro-inflammatory mediator that may interact with soluble KL. We have reported that KL reduces the osteogenic response to high phosphate levels, a condition seen in CKD, in human aortic valve interstitial cells (AVICs). This study tested the hypothesis that soluble KL captures FGF23 to prevent aortic valve inflammocalcification induced by CKD. Methods and Results: We developed a novel CKD-CAVD model in old C57 mice (20 months) on AIN-76A diet and treated with adenine and calcitriol. Histology and immunostaining revealed tubular damage and monocyte/macrophage accumulation in kidney tissue of CKD mice. Aortic valve lesions, thickening and calcification, were evident in CKD mice. Serum FGF23 levels were increased while serum KL levels decreased. In addition, KL expression in the aortic valve was reduced. Recombinant FGF23 (0.04 mg/ml) elevated the inflammosteogenic activity in human AVICs. Treatment with recombinant KL (0.5 μg/ml) markedly decreased FGF23-induced inflammosteogenic activation in AVICs. Systemic analysis revealed that FGF23 upregulates YAP/SMAD3 signaling, and inhibition of YAP and SMAD3 reduced the effect of FGF23 on the inflammosteogenic activity in AVICs. In addition, recombinant KL suppressed the activation of this signaling mechanism in AVICs, and treatment of CKD mice with recombinant KL attenuated aortic valve lesions. However, denaturation of KL protein resulted in a loss of its effect on FGF23-induced AVIC inflammosteogenic activation. Further, incubation of FGF23 with recombinant KL not only resulted in the formation of complexes of these two proteins, but also markedly decreased the pro-inflammosteogenic effect of FGF23 in AVICs. Conclusion: This study demonstrates that CKD induces KL insufficiency and FGF23 accumulation that promote aortic valve lesions. Recombinant KL is capable of binding to FGF23 to suppress its pro-inflammosteogenic effect in the aortic valve.

Correlation between biological responses in vitro and in vivo to Ca-doped sol-gel coatings assessed using proteomic analysis

Poor correlation between the results of in vitro testing and the subsequent in vivo experiments hinders the design of biomaterials. Thus, new characterisation methods are needed. This study used proteomic and histological techniques to analyse the effects of Ca-doped biomaterials in vitro and in vivo and verify the correlation between the two systems. The sol-gel route was employed to synthesise coatings functionalised with 0.5 and 5 wt% of CaCl2. Morphology of the coatings was examined using SEM; the Ca2+ ion release from the materials was analysed by means of ICP-AES spectroscopy. The osteogenic and inflammatory responses were inspected in vitro in human osteoblasts (HOb) and TPH-1 monocytes. The in vivo experiments used a rabbit model. The nLC-MS/MS-based proteomic methods were utilised to analyse the proteins adhering to the material samples incubated with human serum or examine protein expression in the tissues close to the implants. Ca-doped biomaterials caused a remarkable increase in the adsorption of coagulation-related proteins, both in vitro (PLMN, THRB, FIBA and VTNC) and in vivo (FBLN1, G1U978). Enhanced affinity to these materials was also observed for proteins involved in inflammation (CO5, C4BPA, IGHM and KV302 in vitro; CARD6, DDOST and CD14 in vivo) and osteogenic functions (TETN, PEDF in vitro; FBN1, AHSG, MYOC in vivo). The results obtained using different techniques were well matched, with a good correlation between the in vitro and in vivo experiments. Thus, the proteomic analysis of biological responses to biomaterials in vitro is a useful tool for predicting their impact in vivo.

Mechanotransduction in high aspect ratio nanostructured meta-biomaterials: The role of cell adhesion, contractility, and transcriptional factors.

Black Ti (bTi) surfaces comprising high aspect ratio nanopillars exhibit a rare combination of bactericidal and osteogenic properties, framing them as cell-instructive meta-biomaterials. Despite the existing data indicating that bTi surfaces induce osteogenic differentiation in cells, the mechanisms by which this response is regulated are not fully understood. Here, we hypothesized that high aspect ratio bTi nanopillars regulate cell adhesion, contractility, and nuclear translocation of transcriptional factors, thereby inducing an osteogenic response in the cells. Upon the observation of significant changes in the morphological characteristics, nuclear localization of Yes-associated protein (YAP), and Runt-related transcription factor 2 (Runx2) expression in the human bone marrow-derived mesenchymal stem cells (hMSCs), we inhibited focal adhesion kinase (FAK), Rho-associated protein kinase (ROCK), and YAP in separate experiments to elucidate their effects on the subsequent expression of Runx2. Our findings indicated that the increased expression of Runx2 in the cells residing on the bTi nanopillars compared to the flat Ti is highly dependent on the activity of FAK and ROCK. A mechanotransduction pathway is then postulated in which the FAK-dependent adhesion of cells to the extreme topography of the surface is in close relation with ROCK to increase the endogenous forces within the cells, eventually determining the cell shape and area. The nuclear translocation of YAP may also enhance in response to the changes in cell shape and area, resulting in the translation of mechanical stimuli to biochemical factors such as Runx2.

Surface characterizations and cell growth of rough zirconia surfaces immobilized with different BMP-2 concentrations using natural crosslinker genipin

Zirconia (ZrO2) is widely used in the dental implant industry, due to its good mechanical properties and biocompatibility. However, the bioinert nature of ZrO2 may hinder osseointegration. This study investigated the responses of human bone marrow mesenchymal stem cells (hMSCs) to sandblasted ZrO2 surfaces immobilized with bone morphogenetic protein-2 (BMP-2) using the natural crosslinker genipin. The immobilization of BMP on sandblasted ZrO2 surfaces increased the surface roughness but did not alter the wettability. The focal adhesion activation and later-stage mineralization of hMSCs were higher on BMP-2-modified ZrO2 surfaces than on untreated surfaces. The BMP-2-modified ZrO2 surfaces with low (100 ng/mL) and high (500 ng/mL) concentrations showed no significant difference in later-stage osteogenic response. However, ZrO2 surfaces with low BMP-2 concentration earlier stimulated the p38 (mitogen-activated protein kinase pathway) protein expression, osteogenic early marker osteopontin expression, and later-stage mineralization. This simple but effective process to immobilize BMP-2 on rough ZrO2 surfaces can benefit future dental implant applications.

Sulfated carboxymethyl cellulose and carboxymethyl κ-carrageenan immobilization on 3D-printed poly-ε-caprolactone scaffolds differentially promote pre-osteoblast proliferation and osteogenic activity.

The lack of bioactivity in three-dimensional (3D)-printing of poly-є-caprolactone (PCL) scaffolds limits cell-material interactions in bone tissue engineering. This constraint can be overcome by surface-functionalization using glycosaminoglycan-like anionic polysaccharides, e.g., carboxymethyl cellulose (CMC), a plant-based carboxymethylated, unsulfated polysaccharide, and κ-carrageenan, a seaweed-derived sulfated, non-carboxymethylated polysaccharide. The sulfation of CMC and carboxymethylation of κ-carrageenan critically improve their bioactivity. However, whether sulfated carboxymethyl cellulose (SCMC) and carboxymethyl κ-carrageenan (CM-κ-Car) affect the osteogenic differentiation potential of pre-osteoblasts on 3D-scaffolds is still unknown. Here, we aimed to assess the effects of surface-functionalization by SCMC or CM-κ-Car on the physicochemical and mechanical properties of 3D-printed PCL scaffolds, as well as the osteogenic response of pre-osteoblasts. MC3T3-E1 pre-osteoblasts were seeded on 3D-printed PCL scaffolds that were functionalized by CM-κ-Car (PCL/CM-κ-Car) or SCMC (PCL/SCMC), cultured up to 28 days. The scaffolds’ physicochemical and mechanical properties and pre-osteoblast function were assessed experimentally and by finite element (FE) modeling. We found that the surface-functionalization by SCMC and CM-κ-Car did not change the scaffold geometry and structure but decreased the elastic modulus. Furthermore, the scaffold surface roughness and hardness increased and the scaffold became more hydrophilic. The FE modeling results implied resilience up to 2% compression strain, which was below the yield stress for all scaffolds. Surface-functionalization by SCMC decreased Runx2 and Dmp1 expression, while surface-functionalization by CM-κ-Car increased Cox2 expression at day 1. Surface-functionalization by SCMC most strongly enhanced pre-osteoblast proliferation and collagen production, while CM-κ-Car most significantly increased alkaline phosphatase activity and mineralization after 28 days. In conclusion, surface-functionalization by SCMC or CM-κ-Car of 3D-printed PCL-scaffolds enhanced pre-osteoblast proliferation and osteogenic activity, likely due to increased surface roughness and hydrophilicity. Surface-functionalization by SCMC most strongly enhanced cell proliferation, while CM-κ-Car most significantly promoted osteogenic activity, suggesting that surface-functionalization by CM-κ-Car may be more promising, especially in the short-term, for in vivo bone formation.

Evaluation of the inflammatory and osteogenic response induced by titanium particles released during implantoplasty of dental implants

Implantoplasty is a mechanical decontamination technique that consists of removing the threads and polishing and smoothing the dental implant surface. During implantoplasty there is a large release of titanium metal particles that might provoke a proinflammatory response and reduce the viability of osteogenic cells. We analyze the inflammatory and osteogenic response induced by Ti6Al4V particles released during implantoplasty and by as-received commercially pure Ti particles. Macrophages stimulated with metal particles obtained by implantoplasty and with as-received Ti particles showed an increased proinflammatory expression of TNF-α and a decreased expression of TGF-β and CD206. Regarding cytokine release, there was an increase in IL-1β, while IL-10 decreased. The osteogenic response of Ti6Al4V extracts showed a significant decrease in Runx2 and OC expression compared to the controls and commercially pure Ti extracts. There were no relevant changes in ALP activity. Thus, implantoplasty releases metal particles that seems to induce a pro-inflammatory response and reduce the expression of osteogenic markers.

Involvement of PI3K/Akt signaling pathway in promoting osteogenesis on titanium implant surfaces modified with novel non-thermal atmospheric plasma.

Non-thermal atmospheric plasma (NTAP) modification to induce a hydrophilic titanium (Ti) surface with less carbon contamination, has been demonstrated to boost the osteogenic responses. In this study, we investigated the underlying bone formation mechanism of NTAP-Ti, and the involvement of PI3K/Akt signaling pathway in regulating osteogenic activities on NTAP-Ti surfaces. NTAP was employed for Ti activation, and PI3K inhibitor, LY294002, was applied to the suppression of PI3K/Akt pathway. We systematically and quantitatively detected the cell morphology, attachment, proliferation, osteogenic differentiation and mineralization of MC3T3-E1 mouse preosteoblasts, and molecular expressions involved in osteogenesis and PI3K/Akt signaling pathway in vivo and in vitro. A descent in osteoblast proliferation on Ti surfaces in relation to LY294002. Alkaline phosphatase (ALP) activity, as well as matrix mineralization, was mitigated by PI3K inhibitor in NTAP-Ti. Likewise, the expression levels of osteogenesis-related genes [ALP, osteocalcin (Ocn), osteopontin (Opn) and runt-related transcription factor 2 (Runx2)] on NTAP-Ti were notably attenuated by LY294002, as confirmed by the results of osteogenesis-related proteins (ALP, and Runx2) expression analysis. In addition, the expression of PI3K/Akt signal pathway proteins further verified the inhibition of LY294002 on Ti surfaces modified by NTAP. Collectively, the PI3K/Akt signal pathway was involved in the amelioration of osteogenesis induced by NTAP modification. NTAP treatment for Ti activation is promising in augmented osteogenic potential through the activation of PI3K/Akt signal pathway.

Precisely Tuning the Pore-Wall Surface Composition of Bioceramic Scaffolds Facilitates Angiogenesis and Orbital Bone Defect Repair.

Orbital bone damage (OBD) may result in severe post-traumatic enophthalmos, craniomaxillofacial deformities, vision loss, and intracranial infections. However, it is still a challenge to fabricate advanced biomaterials that can match the individual anatomical structure and enhance OBD repair in situ. Herein, we aimed to develop a selective surface modification strategy on bioceramic scaffolds and evaluated the effects of inorganic or organic functional coating on angiogenesis and osteogenesis, ectopically and orthotopically in OBD models. It was shown that the low thermal bioactive glass (BG) modification or layer-by-layer assembly of a biomimetic hydrogel (Biogel) could readily integrate into the pore wall of the bioceramic scaffolds. The BG and Biogel modification showed appreciable enhancement in the initial compressive strength (∼30-75%) or structural stability in vivo, respectively. BG modification could enhance by nearly 2-fold the vessel ingrowth, and the osteogenic capacity was also accelerated, accompanied with a mild scaffold biodegradation after 3 months. Meanwhile, the Biogel-modified scaffolds showed enhanced osteogenic differentiation and mineralization through calcium and phosphorus retention. The potential mechanism of the enhanced bone repair was elucidated via vascular and osteogenic cell responses in vitro, and the cell tests indicated that the Biogel and BG functional layers were both beneficial for in vitro osteoblastic differentiation and mineralization on bioceramics. Totally, these findings demonstrated that the bioactive ions or biomolecules could significantly improve the angiogenic and osteogenic capabilities of conventional bioceramics, and the integration of inorganic or organic functional coating in the pore wall is a highly flexible material toolbox that can be tailored directly to improve orbital bone defect repair.

CircSKIL promotes osteoblastic differentiation of periodontal ligament cells by sponging miR-532-5p to activate Notch signaling.

Periodontal ligament cells (PDLCs) possess the capacity to differentiate into a variety of cell types to benefit periodontal regeneration. In this study, we examined the circSKIL/miR-532-5p/Notch1 axis in controlling the osteoblastic differentiation of PDLCs. Primary human PDLCs (hPDLCs) were isolated and induced to differentiate into osteoblasts. Osteogenic responses were assessed for the expressions of osteoblast-related marker proteins (including alkaline phosphatase (ALP), osteocalcin (OCN), bone morphogenetic protein-2 (BMP2), and runt-related transcription factor 2 (RUNX2) by RT-PCR. The formation of mineralized nodules was examined by Alizarin Red S (ARS) staining and ALP activity. Expressions of circSKIL, miR-532-5p, and Notch1 were measured by RT-PCR and western blotting, and their regulations by combining bioinformatic analysis and luciferase reporter assay. Notch signaling was assessed for the expressions of hairy and enhancer of split-1 (HES1) and Notch intracellular domain (NICD). During osteoblastic differentiation of hPDLCs, circSKIL, and Notch1 were up-regulated, while miR-532-5p down-regulated. By sponging miR-532-5p, circSKIL activated Notch signaling, increasing levels of Notch1, HES1, and NICD. Functionally, knocking down circSKIL or overexpressing miR-532-5p inhibited osteoblastic differentiation of PDLCs, down-regulating ALP, OCN, BMP2, and RUNX2, and reducing ARS staining or ALP activity. The impacts of circSKIL knockdown were rescued by miR-532-5p inhibitor or overexpressing Notch1, while those caused by up-regulating miR-532-5p were reversed by overexpressing Notch1. By targeting miR-532-5p and up-regulating Notch1, circSKIL critically controls osteoblastic differentiation of hPDLCs. Therefore, modulating this axis may maximize the differentiation of PDLCs into osteoblasts and benefit periodontal regeneration.

Lithium ion doped carbonated hydroxyapatite compositions: Synthesis, physicochemical characterisation and effect on osteogenic response in vitro.

Hydroxyapatite is a commonly researched biomaterial for bone regeneration applications. To augment performance, hydroxyapatite can be substituted with functional ions to promote repair. Here, co-substituted lithium ion (Li+) and carbonate ion hydroxyapatite compositions were synthesised by an aqueous precipitation method. The co-substitution of Li+ and CO32- is a novel approach that accounts for charge balance, which has been ignored in the synthesis of Li doped calcium phosphates to date. Three compositions were synthesised: Li+-free (Li 0), low Li+ (Li 0.25), and high Li+ (Li 1). Synthesised samples were sintered as microporous discs (70-75% theoretical sintered density) prior to being ground and fractionated to produce granules and powders, which were then characterised and evaluated in vitro. Physical and chemical characterisation demonstrated that lithium incorporation in Li 0.25 and Li 1 samples approached design levels (0.25 and 1mol%), containing 0.253 and 0.881mol% Li+ ions, respectively. The maximum CO32- ion content was observed in the Li 1 sample, with ~8wt% CO3, with the carbonate ions located on both phosphate and hydroxyl sites in the crystal structure. Measurement of dissolution products following incubation experiments indicated a Li+ burst release profile in DMEM, with incubation of 30mg/ml sample resulting in a Li+ ion concentration of approximately 140mM after 24h. For all compositions evaluated, sintered discs allowed for favourable attachment and proliferation of C2C12 cells, human osteoblast (hOB) cells, and human mesenchymal stem cells (hMSCs). An increase in alkaline phosphatase (ALP) activity with Li+ doping was demonstrated in C2C12 cells and hMSCs seeded onto sintered discs, whilst the inverse was observed in hOB cells. Furthermore, an increase in ALP activity was observed in C2C12 cells and hMSCs in response to dissolution products from Li 1 samples which related to Li+ release. Complementary experiments to further investigate the findings from hOB cells confirmed an osteogenic role of the surface topography of the discs. This research has shown successful synthesis of Li+ doped carbonated hydroxyapatite which demonstrated cytocompatibility and enhanced osteogenesis in vitro, compared to Li+-free controls.

Interplay of surface polarization charge, dynamic electrical stimulation and compositional modification towards accelerated osteogenic response of NaxK1-xNbO3 piezo-bioceramics

Bone remodeling processes involve endogenous bioelectrical signals such as piezoelectric charges. Moreover, external electrical stimulation helps in improving the healing capability of injured tissues by modulating the metabolic signaling pathways of cells. Towards this end, the present study reveals the influence of the combined action of electrostatic surface polarization charge and dynamic pulsed electrical stimulation alongwith compositional modification towards improving the osteogenic response of emerging piezo-bioceramics, sodium potassium niobate [NaxK1-xNbO3 (x=0.2-0.8), NKN]. The dependence of crystal structure on compositions (x) was retrieved by Rietveld refinement and X-ray peak profile analyses. The surface charge, stored in the polarized (@ 25kV at 500°C) NaxK1-xNbO3 (x=0.2, 0.5, 0.8) samples were measured to be 0.52, 0.50 and 0.47μC/cm2, respectively, using thermally stimulated depolarized current (TSDC). X-ray photoelectron spectroscopy (XPS) survey scan spectra revealed that the polarization process does not alter the surface chemistry of NKN. Negatively charged surfaces are observed to accelerate early-stage adhesion of osteoblast-like cells which further results in enhanced spreading of adhered cells. Subsequently, the dynamic pulsed electrical stimulation of 1V/cm with the pulse duration of 400μs was applied, while the cells were being adhered on electrostatically charged surfaces. The quantitative and qualitative analyses revealed that the synergistic action of electrostatic surface polarization charge and dynamic pulsed electrical stimulation further accelerates cell proliferation and differentiation on negatively charged surfaces of Na and K-rich compositions of NKN. The mechanism of augmented cellular activity was analyzed using intracellular Ca2+ measurement.

Mechanical Stretch Induced Osteogenesis on Human Annulus Fibrosus Cells through Upregulation of BMP-2/6 Heterodimer and Activation of P38 and SMAD1/5/8 Signaling Pathways.

Degenerative disc disease (DDD) is an important cause of low back pain. Repetitive tensile stress from the daily motion of the spine predisposes it to injury of the annulus fibrosus (AF) which causes IVD degeneration. This study aims to determine the causal relationship between mechanical stretch and osteogenesis in the AF cells of IVD as affected by bone morphogenic proteins (BMPs), specifically BMP-2/6 heterodimers. Our results found that 15% tensile stress (high cyclic stretching, HCS) may induce the expression of osteogenesis-related markers (Runx2, osterix) by upregulating BMP-2/6 heterodimeric ligands and their receptors on the human AF cell line. HCS also induced transient phosphorylation of p38 mitogen-activated protein (MAP) kinase and SMAD1/5/8. Neutralizing antibodies to the BMP-2/6 receptor (ALK3) blocked the expression of Runx2 and osterix, as well as the phosphorylation of p38 and SMAD1/5/8. In addition, treatment with a p38 MAPK inhibitor (SB203580) or siRNA to neutralize the effects of SMAD1/5/8 suppressed tensile stress-induced Runx2 and osterix expression. Mechanical stretching induces activation of p38 MAP kinase and SMAD1/5/8 signaling pathways, followed by the upregulation of BMP-2/6 heterodimer expression, thereby stimulating osteogenic Runx2 and osterix expression on AF cells. HCS may accelerate the progression of IVD degeneration by promoting an osteogenic response.

PTH1R translocation to primary cilia in mechanically-stimulated ostecytes prevents osteoclast formation via regulation of CXCL5 and IL-6 secretion.

Osteocytes respond to mechanical forces controlling osteoblast and osteoclast function. Mechanical stimulation decreases osteocyte apoptosis and promotes bone formation. Primary cilia have been described as potential mechanosensors in bone cells. Certain osteogenic responses induced by fluid flow (FF) in vitro are decreased by primary cilia inhibition in MLO-Y4 osteocytes. The parathyroid hormone (PTH) receptor type 1 (PTH1R) modulates osteoblast, osteoclast, and osteocyte effects upon activation by PTH or PTH-related protein (PTHrP) in osteoblastic cells. Moreover, some actions of PTH1R seem to be triggered directly by mechanical stimulation. We hypothesize that PTH1R forms a signaling complex in the primary cilium that is essential for mechanotransduction in osteocytes and affects osteocyte-osteoclast communication. MLO-Y4 osteocytes were stimulated by FF or PTHrP (1-37). PTH1R and primary cilia signaling were abrogated using PTH1R or primary cilia specific siRNAs or inhibitors, respectively. Conditioned mediaobtained from mechanically- or PTHrP-stimulated MLO-Y4 cells inhibited the migration of preosteoclastic cells and osteoclast differentiation. Redistribution of PTH1R along the entire cilium was observed in mechanically stimulated MLO-Y4 osteocytic cells. Preincubation of MLO-Y4 cells with the Gli-1 antagonist, the adenylate cyclase inhibitor (SQ22536), or with the phospholipase C inhibitor (U73122), affected the migration of osteoclast precursors and osteoclastogenesis. Proteomic analysis and neutralizing experiments showed that FF and PTH1R activation control osteoclast function through the modulation of C-X-C Motif Chemokine Ligand 5 (CXCL5) and interleukin-6 (IL-6) secretion in osteocytes. These novel findings indicate that both primary cilium and PTH1R are necessary in osteocytes for proper communication with osteoclasts and show that mechanical stimulation inhibits osteoclast recruitment and differentiation through CXCL5, while PTH1R activation regulate these processes via IL-6.

Toward functionalization without functional agents: An X-ray photoelectron spectroscopy study

Changes to the surface composition of hydroxyapatite were measured after incubations in water, in ethanol or in a mixed aqueous-alcoholic medium. Ethanol decreased the surface presence of calcium ions in direct proportion to its amount in the medium. Because of its lower polarity than that of water, ethanol also increased the interfacial energy, in response to which the surface relaxed by rearranging into a more disordered state, as indicated by the increase in the heterogeneity of both calcium and oxygen electronic states. Accordingly, the binding energy of core-level oxygen electrons consistently increased with the concentration of ethanol and was compensated for by the decrease of the corresponding binding energies in calcium atoms, attesting to the weakened ionic bonds at the interface. The weakened ionic bonds increased the metallicity of the calcium ion, which prompted the offset of the valence band edge determined by the Ca4s electron energy state toward the Fermi level and the conduction band, thus shrinking the band gap and increasing the electrical conductivity of the surface. The surface energy reduction entailing the partial loss of the crystalline order at the surface predisposed the nanoparticles incubated in alcoholic media for diminished sorption of proteins, but also for an augmented osteogenic response. These results demonstrate that surface functionalization of materials for various physicochemical and biological effects could be achieved without the use of chemical ligands. Rather, more economical design techniques stemming from the repertoire of materials science and engineering could be employed with equally satisfactory outcomes.

Hypoxia Preconditioned Serum (HPS) Promotes Osteoblast Proliferation, Migration and Matrix Deposition.

Interest in discovering new methods of employing natural growth factor preparations to promote bone fracture healing is becoming increasingly popular in the field of regenerative medicine. In this study, we were able to demonstrate the osteogenic potential of hypoxia preconditioned serum (HPS) on human osteoblasts in vitro. Human osteoblasts were stimulated with two HPS concentrations (10% and 40%) and subsequently analyzed at time points of days 2 and 4. In comparison to controls, a time- and dose-dependent (up to 14.2× higher) proliferation of osteoblasts was observed after 4 days of HPS-40% stimulation with lower lactate dehydrogenase (LDH)-levels detected than controls, indicating the absence of cytotoxic/stress effects of HPS on human osteoblasts. With regards to cell migration, it was found to be significantly faster with HPS-10% application after 72 h in comparison to controls. Further osteogenic response to HPS treatment was evaluated by employing culture supernatant analysis, which exhibited significant upregulation of OPG (Osteoprotegerin) with higher dosage (HPS-10% vs. HPS-40%) and longer duration (2 d vs. 4 d) of HPS stimulation. There was no detection of anti-osteogenic sRANKL (soluble Receptor Activator of NF-κB Ligand) after 4 days of HPS stimulation. In addition, ALP (alkaline phosphatase)-enzyme activity, was found to be upregulated, dose-dependently, after 4 days of HPS-40% application. When assessing ossification through Alizarin-Red staining, HPS dose-dependently achieved greater (up to 2.8× higher) extracellular deposition of calcium-phosphate with HPS-40% in comparison to controls. These findings indicate that HPS holds the potential to accelerate bone regeneration by osteogenic promotion of human osteoblasts.

4-Octyl itaconate suppresses the osteogenic response in aortic valvular interstitial cells via the Nrf2 pathway and alleviates aortic stenosis in mice with direct wire injury

Calcific aortic valve disease (CAVD) is the most prevalent valvular heart disease in older individuals, but there is a lack of drug treatment. The cellular biological mechanisms of CAVD are still unclear. Oxidative stress and endoplasmic reticulum stress (ER stress) have been suggested to be involved in the progression of CAVD. Many studies have demonstrated that 4-octyl itaconate (OI) plays beneficial roles in limiting inflammation and oxidative injury. However, the potential role of OI in CAVD has not been thoroughly explored. Thus, we investigated OI-mediated modulation of ROS generation and endoplasmic reticulum stress to inhibit osteogenic differentiation in aortic valve interstitial cells (VICs). In our study, calcified aortic valves showed increased levels of ER stress and superoxide anion, as well as abnormal expression of Hmox1 and NQO1. In VICs, OI activated the Nrf2 signaling cascade and contributed to Nrf2 stabilization and nuclear translocation, thus augmenting the expression of genes downstream of Nrf2 (Hmox1 and NQO1). Moreover, OI ameliorated osteogenic medium (OM)-induced ROS production, mitochondrial ROS levels and the loss of mitochondrial membrane potential in VICs. Furthermore, OI attenuated the OM-induced upregulation of ER stress markers, osteogenic markers and calcium deposition, which were blocked by the Nrf2-specific inhibitor ML385. Interestingly, we found that OM-induced ER stress and osteogenic differentiation were ROS-dependent and that Hmox1 silencing triggered ROS production, ER stress and elevated osteogenic activity, which were inhibited by NAC. Overexpression of NQO1 mediated by adenovirus vectors significantly suppressed OM-induced ER stress and osteogenic markers. Collectively, these results showed the anti-osteogenic effects of OI on AVICs by regulating the generation of ROS and ER stress by activating the Nrf2 signaling pathway. Furthermore, OI alleviated aortic stenosis in a mouse model with direct wire injury. Due to its antioxidant properties, OI could be a potential drug for the prevention and/or treatment of CAVD.

Long-term mechanical loading is required for the formation of 3D bioprinted functional osteocyte bone organoids

Mechanical loading has been shown to influence various osteogenic responses of bone-derived cells and bone formation in vivo. However, the influence of mechanical stimulation on the formation of bone organoid in vitro is not clearly understood. Here, three-dimensional (3D) bioprinted human mesenchymal stem cells-laden graphene oxide composite scaffolds were cultured in a novel cyclic-loading bioreactors for up to 56 d. Our results showed that mechanical loading from day 1 (ML01) significantly increased organoid mineral density, organoid stiffness, and osteoblast differentiation compared with non-loading and mechanical loading from day 21. Importantly, ML01 stimulated collagen I maturation, osteocyte differentiation, lacunar-canalicular network formation and YAP expression on day 56. These finding are the first to reveal that long-term mechanical loading is required for the formation of 3D bioprinted functional osteocyte bone organoids. Such 3D bone organoids may serve as a human-specific alternative to animal testing for the study of bone pathophysiology and drug screening.

Effects of Different Basal Cell Culture Media upon the Osteogenic Response of hMSCs Evaluated by 99mTc-HDP Labeling.

The osteogenic differentiation of mesenchymal stem cells is now a standard procedure in modern bone tissue engineering. As this is a promising field for future clinical applications, many cell culture media exist to promote osteogenic differentiation. Prior to differentiation, cells must be expanded to obtain sufficient numbers for experiments. Little evidence is available regarding the optimal media combination for expansion and differentiation to maximize the osteogenic response. Therefore, human BM-MSCs (n = 6) were expanded in parallel in DMEM (Dulbecco’s Modified Eagle Medium) LG (Low Glucose) and α-MEM (Minimum Essential Media alpha-modification), followed by simultaneous monolayer differentiation toward the osteogenic lineage in: 1. DMEM LG (Low Glucose), 2. DMEM HG (High Glucose), 3. α-MEM, 4. “Bernese medium”, and 5. “Verfaillie medium”, with a corresponding negative control (total 20 groups). As a marker for osteogenic differentiation, hydroxyapatite was accessed using radioactive 99mTc-HDP labeling and quantitative alizarin red staining. The results indicate that all media except “Bernese medium” are suitable for osteogenic differentiation, while there was evidence that DMEM LG is partly superior when used for expansion and differentiation of BM-hMSCs. Using “Verfaillie medium” after DMEM LG expansion led to the highest grade of osteogenic differentiation. Nevertheless, the difference was not significant. Therefore, we recommend using DMEM LG for robust osteogenic differentiation, as it is highly suitable for that purpose, economical compared to other media, and requires little preparation time.

Inactivation of AR or ERα in Extrahypothalamic Neurons Does not Affect Osteogenic Response to Loading in Male Mice.

Failure of bone mass maintenance in spite of functional loading is an important contributor to osteoporosis and related fractures. While the link between sex steroids and the osteogenic response to loading is well established, the underlying mechanisms are unknown, hampering clinical relevance. Androgens inhibit mechanoresponsiveness in male mice, but the cell type mediating this effect remains unidentified. To evaluate the role of neuronal sex steroid receptor signaling in the male bone's adaptive capacity, we subjected adult male mice with an extrahypothalamic neuron-specific knockout of the androgen receptor (N-ARKO) or the estrogen receptor alpha (N-ERαKO) to in vivo mechanical stimulation of the tibia. Loading increased cortical thickness in the control animals mainly through periosteal expansion, as total cross-sectional tissue area and cortical bone area but not medullary area were higher in the loaded than the unloaded tibia. Trabecular bone volume fraction also increased upon loading in the control group, mostly due to trabecular thickening. N-ARKO and N-ERαKO males displayed a loading response at both the cortical and trabecular bone compartments that was not different from their control littermates. In conclusion, we show that the presence of androgen receptor or estrogen receptor alpha in extrahypothalamic neurons is dispensable for the osteogenic response to mechanical loading in male mice.