Module nRF24L01 Research Articles

IMPLEMENTASI SISTEM MONITORING KELEMBABAN TANAH, PH TANAH DAN INTENSITAS CAHAYA TANAMAN LAHAN TERBUKA DENGAN WSN BERBASIS MODUL NRF24L01

Soil conditions such as moisture, pH, and light intensity at BBPP Lembang are still conventionally monitored by testing soil samples in the laboratory. Therefore, this research aims to develop a monitoring system to determine soil moisture, soil pH, and light intensity in real-time. This research uses NRF24L01 module, which enables wireless communication between sensor nodes and gateway. Sensor tests for soil moisture, soil pH, and light intensity as well as data validation at the gateway and transmission range testing were conducted through ten experiments on sensor nodes and gateways and thirty experiments to measure transmission range at distances of 40 m, 100 m, 150 m, and 200 m with or without obstructions such as trees and buildings. The test results show that the soil moisture sensor has an average error of 5.765%, soil pH 2.515%, and light intensity 0.075%. Thus, the Gateway is able to transmit data with 0% error for soil moisture, soil pH, and light intensity. Test results at a distance of 40m showed 100% data transmission with and without obstructions. However, the received data dropped by about 7% at distances of 100m, 150m, and 200m, with no obstructions, and 27% - 47% when obstructions, such as trees and buildings, were present due to signal interference.

Remote Water Quality Monitoring System In Shrimp Ponds With Photovoltaic (PV)-Based Energy Source

Introduction: Shrimp has great potential to be used as a business field in Indonesia. Especially in Parigi Regency itself, there are now many shrimp ponds that can be found because of the benefits obtained, so people are interested in making shrimp farming a livelihood. One of the main problems of shrimp ponds is pond water quality. There are several factors that affect pond water quality, namely water temperature, water pH, and water salinity, good pond water quality management can maintain quality standards and can increase shrimp yield and productivity Method: To facilitate the shrimp farmers, innovations need to be made in order to help the shrimp farmers manage their shrimp ponds, therefore using a remote water quality monitoring was system in shrimp ponds with photovoltaic (PV) based energy sources is expected to be an innovation in managing shrimp ponds, especially in monitoring water quality in shrimp ponds. The monitoring system designed using the NRF24L01 module as a remote communication module, at the research location the distance from the shrimp pond to the house is approximately 100 meters, so the tools that have been designed can facilitate shrimp farmers to monitor the shrimp pond Results and Disscussion: The results of testing the DS18B20 temperature sensor compared with a digital thermometer measuring instrument get an average error of 0.014%. The test results of the pH sensor compared to the pH meter get an average error of 0.026%. TDS sensor test results compared with the TDS meter get an average error of 0.04%. Conclusion: The temperature, pH, and salinity monitoring system uses transmitter and receiver modules, where the transmitter module reads and sends data to the receiver module wirelessly with NRF24L01. Using DS18B20 temperature, pH, and TDS sensors, as well as energy from photovoltaics, this system helps shrimp farmers monitor pond water quality remotely.

UNJUK KERJA KOMUNIKASI NIRKABEL HALF-DUPLEX ANTARKENDARAAN MEMANFAATKAN NRF24L01

This study investigates the efficacy of the affordable NRF24L01 wireless communication module in half-duplex mode for vehicle-to-vehicle (V2V) communication. The prototype integrated the NRF24L01 module with an ESP32 microcontroller and an OLED display. The study assesses the delay and packet success rate to uncover the module's attributes under half-duplex situations. This not only surpasses the mere collecting of data, but also emphasizes the practical limitations and strengths of the module. The project aims to achieve two main objectives: firstly, to gather empirical data that may be used to make well-informed decisions in the design of NRF24L01 applications, and secondly, to contribute to the broader examination of wireless communications protocols. It improves comprehension of the impact of half-duplex operation on the performance of the NRF24L01 module. By revealing the mechanics of half-duplex communication, it enhances the efficiency of NRF24L01 usage and facilitates the development of a better protocol.

RANCANG BANGUN PURWARUPA SISTEM KOMUNIKASI ANTAR KENDARAAN MENGGUNAKAN NRF24L01 MODE SIMPLEX

This research aims to design and develop a prototype vehicle-to-vehicle (V2V) communication system utilizing the NRF24L01 module, ESP32 microcontroller, and OLED display in simplex mode. The system enables effective and instant communication between vehicles in the Vehicle Ad-Hoc Networks (VANETs) environment. In the implementation, we optimized the power transmission level and data rate to ensure fast and responsive data transmission. We integrated key components, such as the ESP32, NRF24L01, and OLED display, into the hardware design to establish a reliable and seamlessly integrated system. We also designed the prototype to minimize costs. The prototype demonstrates an effective and cost-efficient technical solution for vehicle communication, making it suitable for research and development projects requiring wireless communication in real-world vehicle scenarios. This research aims to positively contribute to advancing technology to support connectivity and safety in future vehicle mobility. The findings of this research can be beneficial for researchers, engineers, and policymakers interested in improving vehicular communication and mobility.

ANALISIS PENGARUH JARAK DAN KECEPATAN TERHADAP KINERJA SISTEM KOMUNIKASI ANTAR KENDARAAN BERBASIS NRF24L01

The study investigates the impact of distance and speed on wireless communication networks, on vehicle-to-vehicle communication using the low-cost module NRF24L01. Evaluation of performance indicators, such as latency and data loss, is carried out to determine the impact of both of these factors. Understanding the impact of distance and speed on wireless networks is vital as dynamic vehicle-to-vehicle communication develops. The study used several evaluation variations, including measurements ranging from 5 to 100 metres in a stationary scenario, as well as additional tests performed in moving conditions. The test results can provide insight into the advancement of intelligent transportation systems, improving safety, efficiency, and general communication in vehicle-to-vehicle interaction. This will optimize the implementation of the end result of the technology generated by the parties involved.

Design and Implementation of a Micro Controller for Robot Sensing and Driving

According to the control requirements of robot, the micro controller was designed, including the interface for the wireless transmission module NRF24L01, the sampling circuit for collecting the pressure sensing value, the DC motor drive function module, and the auxiliary circuit for ensuring the normal operation of the controller. After passing the hardware testing, the design of the PTZ control system is completed. The virtual reality environment is constructed using unity and VS software, Oculus is used as the head-mounted display, and then the pose sensor of Oculus is used to analyze and extract the pose sensing data for the control of the PTZ. The industrial camera is used to send back video, based on HSV algorithm for target recognition, and displaying video images in the virtual environment. And the above data was sent to the gimbal control system to finalize the virtual reality environment. Finally, the debugging and verification of the hardware architecture based on sensing and driving and the virtual reality environment were completed. And the scenario tests were conducted for the gimbal following and force feedback virtual interaction ball respectively, which verified the use of virtual reality technology to assist in controlling the robot and obtain the sense of immersive control experience.

Remote sensing mission sentinel pro: Analysis of satellite tracking, control, and health monitoring system with solar tracking capability

Nowadays, satellite systems are experiencing noticeable disruptive issues due to the single functionality, high cost of operations, and limited adaptability. This paper presents a satellite mission control system with RF duplex communication, which gives multiple functionalities and health monitoring systems with solar tracking capability. This aims to present a flexible and affordable solution called the Remote Sensing Mission Sentinel Pro Platform. The quantitative approach is used and implemented to trans-receive data from space and pass it to the ground station. Arduino-based prototype uses the nRF24L01 module with an antenna at the ground station to trans-receive satellite data has been developed. Testing and verifications of the developed platform prototype indicated that satellites could monitor key health parameters, including temperature, humidity, and battery charge capacity.

Design and fabrication of a moving robotic glove system

<p><span lang="EN-US">This paper presents the research, design, and manufacture of a robotic hand to control movement with a glove. The moving glove-controlled robotic hand is based on two main parts: the hand mechanism and the control circuit. The control glove unit includes an Arduino nRF24l01 microcontroller module and five flex sensors for five fingers. These sensors are used to collect data about the curvature of each finger. Then those data will be received by the Arduino microcontroller and sent by the nRF24l01 module. The hand's microcontroller will process that information and control five servo motors so that the five fingers of the robotic hand are moved. The result of this research is to produce a robotic hand that accurately simulates the curvature of a user's finger and mimics the motion of a glove well. Moreover, the robot hand can grip objects of different sizes (from 0.1 to 1 kg) and shapes, from which this robot helps users easily manipulate objects.</span></p>

Development of Portable Wireless Parking Sensor Device

Parking is regarded as one of the most difficult aspects of driving a vehicle since it is a stressful and confusing situation, even for a competent driver. Therefore, there are many parking sensor devices designed to facilitate the user's search for a parking spot. The ultrasonic sensor was used for the construction of the parking sensor gadget because it is more resistant to environmental conditions than other sensors. This project's objective is to create a portable, wireless parking sensor device by utilizing ultrasonic sensor features in SolidWorks, Proteus, and Arduino. The prototype of the SolidWorks 3D portable wireless parking sensor gadget has to be rigorously tested at parking spaces for vehicles several times in order to depict the actual environment accurately. To facilitate a seamless vehicle detecting procedure, it was necessary that the prototype be strong and durable. After implementing 2 different types of ad-hoc networks, the outcomes showed that the nRF24L01 module normally offers two types of alternatives, either in mesh routed form or Point-to-Point link (PtP). However, the latter is most recommended to gain higher performance and more configurable.

Wheelchair control system with hand movement using accelerometer sensor

Disability is a condition where there is an imbalance of interaction between biological conditions with the surrounding environment, which includes disruption, limited activities, and restrictions on participation. With the increasing population of people with disabilities in walking, either due to congenital physical disabilities, accidents, or motor functions due to aging, the need for wheelchairs increases. In this research, a wheelchair control system with hand movements using an accelerometer sensor was made. The system consists of a transmitter on the back of the hand and a receiver on the wheelchair. In the transmitter's part, MPU-6050 sensor detects hand movements, whereby hand movements can be upward, downward, straight, left tilted, and right tilted. The data from MPU-6050 sensor was processed by Arduino Nano then sent using the nRF24L01 module. In the receiver's part, the data were processed by Arduino Uno which activates the BTS7960 motor drive module and drives the DC motor. The test results show that hand movements with an angle of 45° can move the wheelchair forward, backward, turn right, turn left, and stop at a speed of 2 km/h with a maximum test load of 80 kg.

IMPLEMENTASI KOMUNIKASI DATA MENGGUNAKAN PROTOKOL RF24NETWORK PADA SISTEM PEMANTAUAN KONDISI RUANGAN BERBASIS JARINGAN SENSOR NIRKABEL

Wireless Sensor Network (WSN) is an infrastructure consisting of a number of sensor nodes that are distributed in certain environments and coordinated using a wireless network. WSN can be implemented using the nRF24L01 module. One protocol that supports the nRF24L01 module is the RF24 protocol. But for the implementation of monitoring the vast room conditions this protocol has the disadvantage of using a single-hop mechanism. So that for a large area range, multi-hop mechanism is needed. The RF24Network protocol is a protocol designed to meet the needs of RF24-based multi-hop mechanisms, users simply build a header that contains the correct destination address and the network will forward it to the destination node. In accordance with the above problems, the authors implement sensor nodes using Arduino Nano as Microcontroller, nRF24L01 for communication media and DHT11 to acquire sensor data. From the implementation results obtained network performance for monitoring the condition of the room with the level of accuracy of data transmission and delay as follows. Single-hop data transmission mechanism without barrier distance 3-12 meters 100% accuracy, 15 meters 70%, 18 meters 40%, 21 meters 0% with a total average delay of 145 ms, with a distance barrier of 3-9 meters 100% accuracy , 12 meters 60%, 15 meters 30%, 18 meters 0% with a total average delay of 276 ms. The multi-hop mechanism of data transmission accuracy reaches 100% with average delay (1 hop without barrier 110 ms with a total distance of 24 meters, with a barrier of 270 ms with a total distance of 18 meters. 2 hops without barrier 270 ms with a total distance of 36 meters , with a 350 ms barrier with a total distance of 27 meters, 3 hops without a 280 ms barrier with a total distance of 48 meters, with a barrier of 260 ms with a total distance of 36 meters)..

Wireharness continuity test equipment design microcontroller-based aircraft module and atmega328p NRF24l01+ Wireless

In the manufacture of aircraft there are systems - systems that are very complex and must be integrated with each other, these systems are integrated with each other with wireharness transmission media. Wireharness is a collection of cables that are tied to form a bundle into a single unit. The continuity testing tool available today uses a multimeter, the disadvantage of using a multimeter is that it takes a long time to carry out because it must be tested one by one point to be tested while there are quite a lot of points to be tested, both operators often have difficulty when looking for cable addresses on the wirelist, the three tools used are not flexible. The purpose of this research is to design and make an aircraft wireharness continuity test tool that can test quickly because it can test many points at the same time, makes it easier for operators when looking for cable addresses on the wirelist, and is flexible when testing because it can measure two points that are quite far apart. far compared to a multimeter probe. This tool has two parts master and slave and each part uses an Atmega328p microcontroller-based controller as a data processor. Then also used 2 CD74HC4067 ICs, namely a 4 to 16 line multiplexer/demultiplexer whose binary output is controlled by a microcontroller. As well as for unidirectional communication between master and slave using NRF24l01+ (wireless). To operate the tool and display the results of the wireharness test, an application program was created using Visual Studio 2010 with the Visual Basic programming language. The system created will be realized into hardware capable of conducting a continuity test of 32 connection pin points in a multipoint to multipoint manner. After all systems are realized, then further testing is carried out on the tool, where this test is carried out to find out whether this tool can operate in accordance with what was planned. In continuity testing with this tool, it is able to produce good tests because it is able to carry out multipoint continuity tests and the communication distance between master and slave is 20 meters, and the testing time using this tool is 46.2% faster than using a multimeter. By using this continuity tester to speed up the work, the result is safer because the cable connections are not confused, can test the connection is disconnected or connected.

Penggunaan NRF24L01 Untuk Monitoring Data Pada PLTS Kapasitas 309 WP

To obtain renewable energy, there are obtaining electricity supply it can be done by utilizing solar energy radiation power. With using solar cells to convert solar energy into electrical energy, or we call as Solar Power Plants (PLTS). This research will develop previous research, there are the design of output monitoring systems and data recording on Arduino microcontroller-based solar panels where tools designed to monitor current, voltage and light intensity use the NRF24l01 module remotely to facilitate analysis of solar cells using the Arduino Uno microcontroller system. Data processing taken in seconds and minutes is displayed on a PC or smartphone screen using Blynk software and the data is stored on the PLX-DAQ in real time. so that researchers do not need to observe PLTS in place for data collection because the tool can cover it automatically with an error rate of sensor testing used less than 5%.

Design of Monitoring System Temperature And Humidity Using DHT22 Sensor and NRF24L01 Based on Arduino

The monitoring system is used for know or get an information on a situation or condition in a certain place or area, with various methods used, so that many monitoring systems are developed and applied to assist human tasks in carrying out monitoring. The hardware design consists of 2 nodes namely the base node and the client node. At the base node there are 2 hardware components used, namely: Arduino Uno and the wireless communication module nRF24L01. The use of the NRF24L01 module is a reliable data communication module so that the data received is in accordance with the data sent by testing the module in different rooms and the same range with a distance of ± 800 m. Buzzer works well with temperature performance results ≥ 32 °C buzzer on and with ≤ 65% humidity buzzer on. The sensor network system can run well, because the ratio of the DHT22 sensor with the thermohygro, the average error is 1.4% for temperature and 3.8% for humidity from the results of data collection.

Performance evaluation of communication methods on electric wheelchairs as assistive technology for persons with disabilities

Abstract The error detection method is a system that determines errors in the data transmission process. One of the algorithms used to calculate this process is cyclic redundancy by sending binary data using mathematical analysis. The result of error detection found that a success rate of 65% and an error of 35%, it can be stated that the wireless communication process using module nRF24L01 has a high connection rate. Furthermore, connection loss can cause packet loss to the recipient during the communication process. This research was applied to assist disabled people with leg disabilities. These systems were equipped with nRF24L01 as transmitter and nRF24L01 as receiver. Both are installed Arduino Nano and Arduino Mega 2560. A controller smart glove tools are installed on an electric wheelchair as a support device with nRF24L01 module communication. This research was successfully implemented on the electric wheelchair.

Investigation of Circularly Polarized CPW Fed Antenna as a 2.45 GHz RFID Reader

In this paper, a bi-directional coplanar-waveguide (CPW)-fed antenna with circular polarization (CP) is investigated as a radio frequency identification (RFID) reader antenna. The antenna geometry is square and printed on one side of the FR4 substrate only, which consumes an overall dimension of 60×60 mm2 with a thickness of 1.5 mm. The simulated and measured parameters of the antenna are in agreement with an impedance bandwidth (S11<-10 dB) of 40.2% (2.18-3.28 GHz) and ARBW (<3 dB) of 28.3% (2.03-2.7 GHz), respectively. The peak gain of the proposed antenna is 3.17 dBi in both ± z directions. An Arduino UNO-based open-source microcontroller setup is used for studying this antenna as an RFID reader antenna, along with a wireless module NRF24L01 module at 2.45 GHz with an external antenna (tag). The path loss between the tag and reader antennas is found to increase in the desired band due to interference exists.

Sistem Transmisi Kontrol Mobil Robot dengan Menggunakan Gestur Tangan

The innovation of the robot cars today is moving very fast. The robot car is capable of being driven without using manual remote controls. One form of technological development in robot car control is by using hand gestures. The microcontrolle placed in the palm of the hand will read the direction of movement of our hands, then the instructions are transmitted to the robot car. The transmission system used in the microcontrolled circuit in the palm of the hand and the receiver circuit inside the robot car must be properly attached. This is influenced by the quality of programming language levels and the arduino mini pro and MPU-6050 circuits. Hand gesture directional readings are able to be easily readable and directly transmitted by the NRF24L01 module via radio waves. The response power of the robot car in receiving hand-move instructions can be received as far as 45 m. In addition to using a good arduino mini pro, the addition of antenna modules will also increase the quality and distance of the connection is getting farther..

Wireless Sensor Network Design Using Multihop Based on Arduino and NRF24L01+

The development of communication networks is very useful in daily activities such as wireless data communication, monitoring and system security. In this case, a wireless sensor network technology is known, which is very suitable when applied to a system with a large number of nodes and spread over a large enough area at a low cost. This wireless sensor network is a wireless communication network that supports communication between sensor nodes in a considerable distance by placing several sensors in an area. Generally, this Wsn consists of a sensor node and a server node in the form of a personal computer. The data from the reading of the CO gas value will be sent directly from the sensor node to the node server. This device is built using the nRF24L01 module and the CO gas sensor using the MQ-7 sensor. This wireless sensor network communication system is built using multihop. From the activities it can be concluded that the success of sending data is influenced by the distance and number of nodes working on a topology, with the amount of data sent which is influenced by long distances and the large number of nodes, not all data is successfully received because of the large number of data collisions from each node.

Wireless electric energy transmission system and its recording system using PZEM004T and NRF24L01 module

&lt;span id="docs-internal-guid-c15e9fd9-7fff-537c-ddf2-1938aca07829"&gt;&lt;span&gt;Electrical energy can not be separated from the name kWh Meter, a tool used to measure and record the amount of electrical energy usage has a shortage of kWh meters can not be monitored remotely how much energy is used, so it is rather inconvenient for PLN officials to check the use of electricity for postpaid customers. This research was conducted to design a prototype of a wireless electrical energy transmission system and design a wireless electrical energy recording system using the NRF24L01 wireless transmitter module and the PZEM004T kWh meter module. The design in this study uses the principle of electromagnetic induction to transfer electrical energy at close range, while to transmit data, the authors use the NRF24L01 module. Besides, the authors use the PZEM004T module to measure various magnitudes. Based on the results of observations and measurements of the design of the tool, the authors found that the transmission of electrical energy using electromagnetic induction is not effective for longer distances because the energy lost in the air is getting bigger. So this technology needs to be further investigated. Besides, the measurement of electrical quantities using the PZEM module has a small difference (under 2%) with measurements using a multimeter, so it can be said that the measurement with the PZEM004T module is effective. &lt;/span&gt;&lt;/span&gt;

Design control system using gesture control on the Arduino-based robot warfare

The development of increasingly advanced technology provides a positive side in various fields, especially the military. This research introduces a different control system in the navigation of robots, especially in the military field. Navigation system used are varied, ranging from robots that are driven using cables to wireless communications that are used to move robots. Various control systems on robots using RC (Remote Control), android, and several electronic devices designed for navigation systems such as joysticks and other control system devices. Researchers designed gesture control on the Arduino nano v3 based and Arduino ATMEGA based combat robots on military equipment, because there is no military equipment that uses a gesture control navigation system. Researchers used an experiment method with an Arduino electronic device as a microcontroller, accelerometer module and MPU6050 gyroscope as a sensor that serves to determine the orientation of motion, NRF24L01 module as telemetry, and engine as drive. The results obtained after designing a gesture control navigation system on a combat robot are very good because it is very easy to operate the robot, and a long duration because using the engine. It was concluded that gesture control was appropriate and safe for use in the military.