IMPLEMENTASI KOMUNIKASI DATA MENGGUNAKAN PROTOKOL RF24NETWORK PADA SISTEM PEMANTAUAN KONDISI RUANGAN BERBASIS JARINGAN SENSOR NIRKABEL

Abstract

Wireless Sensor Network (WSN) is an infrastructure consisting of a number of sensor nodes that are distributed in certain environments and coordinated using a wireless network. WSN can be implemented using the nRF24L01 module. One protocol that supports the nRF24L01 module is the RF24 protocol. But for the implementation of monitoring the vast room conditions this protocol has the disadvantage of using a single-hop mechanism. So that for a large area range, multi-hop mechanism is needed. The RF24Network protocol is a protocol designed to meet the needs of RF24-based multi-hop mechanisms, users simply build a header that contains the correct destination address and the network will forward it to the destination node. In accordance with the above problems, the authors implement sensor nodes using Arduino Nano as Microcontroller, nRF24L01 for communication media and DHT11 to acquire sensor data. From the implementation results obtained network performance for monitoring the condition of the room with the level of accuracy of data transmission and delay as follows. Single-hop data transmission mechanism without barrier distance 3-12 meters 100% accuracy, 15 meters 70%, 18 meters 40%, 21 meters 0% with a total average delay of 145 ms, with a distance barrier of 3-9 meters 100% accuracy , 12 meters 60%, 15 meters 30%, 18 meters 0% with a total average delay of 276 ms. The multi-hop mechanism of data transmission accuracy reaches 100% with average delay (1 hop without barrier 110 ms with a total distance of 24 meters, with a barrier of 270 ms with a total distance of 18 meters. 2 hops without barrier 270 ms with a total distance of 36 meters , with a 350 ms barrier with a total distance of 27 meters, 3 hops without a 280 ms barrier with a total distance of 48 meters, with a barrier of 260 ms with a total distance of 36 meters)..