Non-fluorinated Analogues Research Articles

Fast Collective Hydrogen-Bond Dynamics in HexafluoroisopropanolRelated to its Chemical Activity.

Using fluorinated mono-alcohols, in particular hexafluoro-isopropanol (HFIP), as a solvent can enhance chemical reaction rates in a spectacular manner. Previous work has shown evidence that this enhancement is related to the hydrogen-bond structure of these liquids. Here, we investigate the hydrogen-bond dynamics of HFIP and compare it to thatof its non-fluorinated analog, isopropanol. Ultrafast infrared spectroscopy show that the dynamics of individual hydrogen-bonds is about twice as slow in HFIP as in isopropanol. Surprisingly, from dielectric spectroscopy we find the opposite behavior for the dynamics of hydrogen-bonded clusters: collective rearrangements are3 times faster in HFIP than in isopropanol. This difference indicates that the hydrogen-bonded clusters in HFIP are smaller than in isopropanol. The differences in cluster size can be traced to changes in the hydrogen-bond donor and acceptor strengths upon fluorination. The smaller cluster size canboostreaction rates in HFIP by increasing the concentration of reactive, terminal OH-groups of the clusters, whereas the fast collective dynamics can increase the rate of formation of hydrogen bonds with the reactants. The longer lifetime of the individual hydrogen bonds in HFIP can enhance the stability of the hydrogen-bonded clusters, and so increase the probability of reactant-solvent hydrogen bonding.

Fluoro-Crown Ether Phosphate as Efficient Cell-Permeable Drug Carrier by Disrupting Hydration Layer.

Fast and direct permeation of drug molecules is crucial for effective biotherapeutics. Inspired by a recent finding that fluorous compounds disrupt the hydrogen-bonded network of water, we developed fluoro-crown ether phosphate CyclicFP-X. This compound acts as a fast cell-permeating agent, enabling direct delivery of various bioactive cargos (X) into cancer cells without endocytic entrapment. In contrast, its nonfluorinated cyclic analog (CyclicP-X) failed to achieve cellular internalization. Although the acyclic fluorous analog AcyclicFP-X was internalized, this process occurred slowly owing to the involvement of an endocytic trapping pathway. Designed with a high fluorine density, CyclicFP-X exhibits compactness, polarity, and high-water solubility, facilitating lipid vesicle fusion by disrupting their hydration layers. Raman spectroscopy confirmed the generation of dangling -OH bonds upon addition of CyclicFP-OH to water. Furthermore, conjugating CyclicFP-X with fluorouracil (FU, an anticancer drug) via a reductively cleavable disulfide linker (CyclicFP-SS-FU) demonstrated the general utility of fluoro-crown ether phosphate as a potent carrier for biotherapeutics.

High-temperature stable chromium complexes bearing fluorinated PNP ligands for selective ethylene tetramerization toward 1-octene

A series of new fluorinated PNP ligands of bis(ortho-fluorophenyl)-type (L1-L2) and ortho-fluorophenyl-type (L3-L4) have been synthesized and assessed for the selectivity of ethylene oligomerization. Compared to the non-fluorinated analogue ligand L6, the fluorinated ligand L1 exhibited approximately three times high catalytic activity. The bis(ortho-fluorophenyl)-type ligand L2 with a diethylphosphine substituent offered the highest catalytic performance of 3548 kg∙g−1∙h−1 and the 1-octene selectivity is 67.6 %. Both the L1 and L2 ligands exhibited excellent the activity of catalyst at a high temperature of 100 ℃, with ligand L2 providing the catalytic performance of 1587 kg∙g−1∙h−1 and good selectivity of 47.5 % for 1-C8=. The ortho-fluorophenyl substituent enhances the catalytic activity, while the para-fluorophenyl substituent reduces the catalytic activity. In addition, density functional theory (DFT) calculations and UV–vis spectroscopy have been used to rationalize the role of the fluorine effect in promoting catalytic performance. Our results indicated that the strong inductive effect of fluorine atoms and the non-covalent interaction between fluorine atoms and active centers jointly enhance the stability of the ortho-fluorophenyl-based catalyst and promote its overall activity.

Sulfone Electrophiles in Cross-Electrophile Coupling: Nickel-Catalyzed Difluoromethylation of Aryl Bromides.

Fluoroalkyl fragments have played a critical role in the design of pharmaceutical and agrochemical molecules in recent years due to the enhanced biological properties of fluorinated molecules compared to their non-fluorinated analogues. Despite the potential advantages conferred by incorporating a difluoromethyl group in organic compounds, industrial adoption of difluoromethylation methods lags behind fluorination and trifluoromethylation. This is due in part to challenges in applying common difluoromethyl sources towards industrial applications. We report here the nickel-catalyzed cross-electrophile coupling of (hetero)aryl bromides with difluoromethyl 2-pyridyl sulfone, a sustainably sourced, crystalline difluoromethylation reagent. The scope of this reaction is demonstrated with 24 examples (67 ± 16% average yield) including a diverse array of heteroaryl bromides and precursors to difluoromethyl-containing preclinical pharmaceuticals. This reaction can be applied to small-scale parallel synthesis and benchtop scale-up under mild conditions. As sulfone reagents are uncommon electrophiles in cross-electrophile coupling, the mechanism of this process was investigated. Studies confirmed the formation of •CF2H instead of difluorocarbene. A series of modified difluoromethyl sulfones revealed that sulfone reactivity does not correlate exclusively with reduction potential and that coordination of cations or nickel to the pyridyl group is essential to reactivity, setting out parameters for matching the reactivity of sulfones in cross-electrophile coupling.

Physicochemical properties of binary mixtures of cation-fluorinated ionic liquids with their non-fluorinated analogues

This work reports an investigation of the physicochemical properties (density, viscosity, refractive index and thermal stability) of four binary mixtures having a common acetate ([OAc]¯), trifluoromethanesulfonate ([OTf]¯) or bis(trifluoromethylsulfonyl)imide ([NTf2]¯) anion with either cation-fluorinated and non-fluorinated methylimidazolium (MIm) or pyridinium (Py) cations respectively, at various temperatures. The mixing behaviour of the binary mixtures was analysed by 1H and 19F Nuclear magnetic resonance (NMR) spectrometry, and the excess properties of the mixtures were calculated from the physicochemical data. The binary mixtures of fluorinated ionic liquids (FILs) with their non-fluorinated or alkyl-substituted analogues (AILs) showed an increase in density and viscosity but a decrease in refractive index with an increase in mole fraction of the pure FILs. The thermal stability of the AILs was higher than the FILs, however, an increase in the mole fraction of the pure FILs in the binary mixtures made a negligible impact on the thermal stability of the binary mixtures. These binary mixtures were found to deviate from ideal behaviour for the different physicochemical properties tending to vary between the extremes of the pure components. The large differences in properties of FILs compared with their non-fluorinated analogues were shown to be associated with the size of the fluorine atoms in the fluoro-alkyl chain, the tendency of the fluoro-alkyl chain to form aggregates with fluorinated anions, and the hydrogen bond acceptor strength of the anions. The excess properties were fitted to the Redlich-Kister polynomial equation, and no significant deviation was obtained. This study shows that the physicochemical properties of the fluorinated ionic liquids can conveniently be adjusted for specific applications by simply varying the amount of the cation-fluorinated component in binary mixtures.

Carrier transport and mesomorphic properties of deformable fluorinated perylene bisimide bearing disiloxane chains

We synthesized liquid crystalline difluorinated perylene bisimide derivatives bearing oligosiloxane moieties. At room temperature, these compounds exhibited columnar phases which were stabilized thermodynamically, compared to that of a non-fluorinated analog. The absorption bands in the thin films of the fluorinated compounds exhibited a slight bathochromic shift compared to that in the solution state, indicating a weak electronic coupling between the fluorinated perylene bisimide cores in the columnar phases. The electron mobilities in the columnar phases of the difluorinated compounds were determined to be on the order of 10−2 cm2V−1s−1 at room temperature by the time-of-flight measurements. The LUMO levels of the difluorinated compounds were lowered by 0.1 eV from that of non-fluorinated analog. Anion radicals of the fluorinated compounds were stable as that of the non-fluorinated analog while dianions of the fluorinated compounds were unstable unlike that of the non-fluorinated analog. The difluorinated compounds was soft waxy solid. In particular, the 1,7-difluorinated derivative is deformable to form various shapes at room temperature. A study on the surface morphology of the thin film indicated formation of microscopic grooves, which should enhance the softness of the compound.

Synthesis and cytotoxicity of copper(II) semicarbazone complexes with lipophilic counter-anions

A series of (2,4-dihydroxybenzaldehyde dibenzyl semicarbazone) perfluoroalkyl carboxylato copper(II) complexes, [CF3(CF2)nCO2(LH)Cu] (LH2 = 2,4-dihydroxybenzaldehyde dibenzyl semicarbazone; n = 0, 2, 4, 6; 1–4), and (2,4-dihydroxybenzaldehyde dibenzyl semicarbazone) pyridine copper(II) perfluoroalkyl carboxylates, [(LH)(py)Cu]+[CF3(CF2)nCO2]− (5–8) were synthesized. The lipophilicity of these compounds was determined by reverse-phase thin layer chromatography and correlated with their cytotoxicity towards MOLT-4 human leukaemia cells. Cytotoxicity is more strongly correlated with lipophilicity for the non-ionic compounds (1–4) than for the ionic compounds (5–8). Compounds 5–8 (IC50 2.8–3.8 μM) are generally more cytotoxic than compounds 1–4 (IC50 3.6–8.4 μM). They also exhibit slightly higher cytotoxicity than the parent anticancer compound [(LH)(py)Cu]+[NO3]− (IC50 4.15 μM), suggesting that it is possible to enhance the cytotoxicity of [(LH)(py)Cu]+[NO3]− by replacing nitrate with anions of higher lipophilicity. Attempts to synthesize the non-fluorinated analogue [(LH)(py)Cu]+[CH3CO2]− resulted in the formation of the deprotonated complex [L(py)Cu], whose structure was confirmed by X-ray crystallography. The structural parameters indicate that the deprotonation site is the hydrazonic nitrogen of the semicarbazone ligand.

Ethylene Polymerizations Catalyzed by Fluorinated "Sandwich" Diimine-Nickel and Palladium Complexes.

Nickel and palladium complexes bearing "sandwich" diimine ligands with perfluorinated aryl caps have been synthesized, characterized, and explored in ethylene polymerization reactions. The X-ray crystallographic analysis of the precatalysts 16 and 6b shows differences from their nonfluorinated analogues 17 and 19, with the perfluorinated aryl caps centered precisely over the nickel and palladium centers, which results in higher buried volumes of the metal centers relative to the nonfluorinated analogues. The sandwich diimine-palladium complexes 5a and 5b containing perfluorinated aryl caps polymerize ethylene in a controlled fashion with activities that are substantially increased compared with their nonfluorinated analogues. Migratory insertion rates in relevant methyl ethylene complexes agree with the activities exhibited in bulk polymerization experiments. DFT studies suggest that facility of ethylene rotation from its preferred orientation perpendicular to the Pd-alkyl bond into a parallel in-plane conformation contributes to the higher polymerization activity for 5b relative to 18a. For these palladium systems, polymer molecular weights can be controlled via hydrogen addition (hydrogenolysis), which is unusual for late-transition-metal-catalyzed olefin polymerizations with no catalyst deactivation occurring. Sandwich diimine-nickel complexes 6a and 6b with perfluorinated aryl caps show ethylene polymerization activities that are about half of those of classical tetraisopropyl-substituted catalyst 2 but again are more active than the analogous nonfluorinated sandwich complexes. Ethylene polymerizations exhibit living behavior, and branched ultrahigh-molecular-weight polyethylenes (UHMWPEs) with very low-molecular-weight distributions (less than 1.1) are obtained. The activated nickel catalysts are stable in the absence of monomer and show good long-term stability at 25 °C.

Synthesis and Regioselective Functionalization of Tetrafluorobenzo-[α]-Fused BOPYPY Dyes.

The synthesis of a new bis-BF2 tetrafluorobenzo-[α]-fused BOPYPY dye from 4,5,6,7-tetrafluoroisoindole and 2-hydrazinopyrazine is reported. The regioselectivity of nucleophilic substitution reactions at the periphery of the tetrafluorinated BOPYPY and its α-bromo derivative were investigated using N-, O-, S-, and C-based nucleophiles. Among the aromatic fluorine atoms, the F2 atom is consistently regioselectively substituted, except when the α-position contains a thiophenol group; in this case, F4 is substituted instead due to stabilizing π-π-stacking between the two aromatic groups. The α-bromo BOPYPY derivative also reacts under Stille cross-coupling reaction conditions to produce the corresponding α-substituted product. The spectroscopic properties of these new fluorinated BOPYPYs were investigated and compared with nonfluorinated analogs.

Conformational Mapping, Interactions, and Fluorine Impact by Combined Spectroscopic Approaches and Quantum Chemical Calculations.

Noncovalent interactions and their careful variation can be crucial in understanding molecular structures, conformational topographies, and properties. Here, we examine the fluorination impact on the structure and conformational behavior of 2-(2-fluorophenyl)ethyl alcohol (2-FPEAL) by monitoring the first individual ionization-loss-stimulated Raman spectra of the jet-cooled molecule. The comparison of two different broad-range spectra and predicted equivalents discloses two distinct structures. One possesses a folded side chain (gauche) and the other an extended chain (anti) with the terminal hydrogen atom pointing opposite or toward the fluorine side, indicating the improper previous tentative assignment of the latter. These conformers resemble and differ from the nonfluorinated analogue structures. Theoretical analyses reveal interconversion pathways of 2-FPEAL conformers during expansion and the delicate balance between attractive (C-H···F and O-H···π) and repulsive interactions. These findings show the achievements of our integrated approach, suggesting its potential for overcoming future structural challenges.

Fluorination of porphyrin β-periphery boosts nickel(II)-catalyzed hydrogen evolution reaction

Tunichlorin, the naturally occurring chlorophyll cofactor containing Ni(II) ion, sets up a golden standard for designing the electrocatalysts for hydrogen evolution reaction (HER) via β-peripheral modification. Besides the fine-tuning of the porphyrin β-periphery such as adjusting the aromatics (the saturated level of tetrapyrrole) or installing hydroxyl group (hydrogen bond network) to enhance the catalytic HER efficiency, here we report that β-fluorination of porphyrin is also an important approach to increase the reactivity of Ni(II) center. Benefiting the previously reported derivatization of β-fluorinated porpholactones, we constructed a β-fluorinated tunichlorin mimic (6). Compared with the non-fluorinated analogs (1, 3, and 5), we found that 2, 4, and 6 exhibit significant electrocatalytic HER reactivity acceleration (in terms of turnover frequencies, TOF, s−1) of ca. 37, 170, 133-fold, respectively. Mechanism studies suggested that β-fluorination negatively shifts the metal complexes' reduction potentials and accelerates the electron transfer process, both contributing to the boosting of HER reaction. Notably, 6 showed an 890-fold increase of TOFs than 1, demonstrating the combining advantages of the of fluorination, hydrogenation, and hydroxylation at porphyrin β-periphery.

Comparing the effects of developmental exposure to alpha lipoic acid (ALA) and perfluorooctanesulfonic acid (PFOS) in zebrafish (Danio rerio)

Alpha lipoic acid (ALA) is a dietary supplement that has been used to treat a wide range of diseases, including obesity and diabetes, and have lipid-lowering effects, making it a potential candidate for mitigating dyslipidemia resulting from exposures to the per- and polyfluoroalkyl substance (PFAS) family member perfluorooctanesulfonic acid (PFOS). ALA can be considered a non-fluorinated structural analog to PFOS due to their similar 8-carbon chain and amphipathic structure, but, unlike PFOS, is rapidly metabolized. PFOS has been shown to reduce pancreatic islet area and induce β-cell lipotoxicity, indicating that changes in β-cell lipid microenvironment is a mechanism contributing to hypomorphic islets. Due to structural similarities, we hypothesized that ALA may compete with PFOS for binding to proteins and distribution throughout the body to mitigate the effects of PFOS exposure. However, ALA alone reduced islet area and fish length, with several morphological endpoints indicating additive toxicity in the co-exposures. Individually, ALA and PFOS increased fatty acid uptake from the yolk. ALA alone increased liver lipid accumulation, altered fatty acid profiling and modulated PPARɣ pathway signaling. Together, this work demonstrates that ALA and PFOS have similar effects on lipid uptake and metabolism during embryonic development in zebrafish.

The Perfluoroadamantyl group: a bulky and highly electron-withdrawing substituent in thermally activated delayed fluorescence materials

Abstract The present paper reports development of new thermally activated delayed fluorescence (TADF) molecules with the acridan–triazine structure substituted by perfluoroadamantyl (AdF) groups. The AdF group was prepared by perfluorination using fluorine gas, and introduced into the molecules via nucleophilic aromatic substitution. The bulky AdF group made the emitters highly soluble in organic solvents. Furthermore, their lowest unoccupied molecular orbitals (LUMOs) were stabilized by the electron induction from the AdF groups, leading to small highest occupied molecular orbital (HOMO)–LUMO energy gaps. As a result, both emitters showed red-shifted TADF compared to the non-fluorinated analogue.

Current-Controlled Electrochemical Approach Toward Mono- and Trifluorinated Isoindolin-1-one Derivatives.

An electrochemical intramolecular 5-exo-dig aza-cyclization of 2-alkynylbenzamides and subsequent nucleophilic fluorination have been developed to afford the highly selective synthesis of mono- and trifluorinated isoindolin-1-one derivatives. This work demonstrates the unique capability of synthetic electrochemistry in controlling reaction selectivity through the applied electrolytic parameters. In addition, the obtained monofluorinated 3-methyleneisoindolin-1-one (19) displays interesting photophysical properties that are not observed in its nonfluorinated analog.

Extending the substrate scope of palladium-catalyzed arylfluorination of allylic amine derivatives

Fluorinated molecules often show superior bioactivity or ADME (absorption, distribution, metabolism, and excretion) properties compared to their non-fluorinated analogues. In fact, 20–30 % of newly approved drugs and the majority of recently approved agrochemicals are organofluorine compounds. Unsurprisingly, there is great interest in the development of new and/or improved processes for fluorine incorporation. Pd-catalyzed arylfluorination of alkenes is a novel, emerging fluorination method, which simultaneously introduces a fluorine atom and an aryl group into an alkene framework. The aim of the current work was studying, improving, and extending a literature arylfluorination protocol, which originally utilized N-allylated sulfonamide substrates.

Improving the operational reliability of membranes and bellows with fluorinated surfactants

One of the characteristic properties of organofluorine compounds is their low surface energy. In this regard, surfactants containing perfluoroalkyl groups, as a rule, are much more effective than their nonfluorinated analogues. The unique character of fluorinated surfactants is also determined by their pronounced oleophobic properties. Surfaces treated with fluorinated surfactants are not only water-repellent, as in the case of their hydrocarbon analogues, but also benzo- and oil-repellent. Fluorotensides are highly resistant to oxidants and aggressive substances (acids, alkalis, chlorine, etc.). They also have high temperature resistance, withstand oxygen shock, have a solidification temperature of up to -160 °C, do not change properties at a dose rate of up to 108 rad. The applications of surfactants are extremely diverse. One of the methods of increasing the wear resistance of friction pairs is the method of surface treatment of friction pairs with fluorotensides. Fluorotensides are multicomponent systems that include organofluorine surfactants in various solvents and regulatory additives. In Russia, brands of fluorotensides have been created that surpass foreign samples in many respects, which has significantly expanded the scope of their application.

Pentafluorophenyl vinyl ketone: Synthesis, radical polymerization, copolymerization, and polymer degradation under ultra‐violet irradiation

AbstractIn this study, we report the synthesis of a new fluorinated vinyl monomer, that is, pentafluorophenyl vinyl ketone [1‐(pentafluorophenyl)prop‐2‐en‐1‐one], its radical polymerization and copolymerization with styrene, methyl vinyl ketone, or phenyl vinyl ketone. The obtained homo‐ and co‐polymers were subjected to thermal analysis, contact angle measurement, and an assay of resistance to UV irradiation. The results showed that the poly(pentafluorophenyl vinyl ketone) has a slightly greater contact angle and a lower temperature of the maximum decomposition rate when compared to the nonfluorinated analog: poly(phenyl vinyl ketone).

Modeling the Unimolecular Decay Dynamics of the Fluorinated Criegee Intermediate, CF3CHOO

When volatile alkenes are emitted into the atmosphere, they are rapidly removed by oxidizing agents such as hydroxyl radicals and ozone. The latter reaction is termed ozonolysis and is an important source of Criegee intermediates (CIs), i.e., carbonyl oxides, that are implicated in enhancing the oxidizing capacity of the troposphere. These CIs aid in the formation of lower volatility compounds that typically condense to form secondary organic aerosols. CIs have attracted vast attention over the past two decades. Despite this, the effect of their substitution on the ground and excited state chemistries of CIs is not well studied. Here, we extend our knowledge obtained from prior studies on CIs by CF3 substitution. The resulting CF3CHOO molecule is a CI that can be formed from the ozonolysis of hydrofluoroolefins (HFOs). Our results show that the ground state unimolecular decay should be less reactive and thus more persistent in the atmosphere than the non-fluorinated analog. The excited state dynamics, however, are predicted to occur on an ultrafast timescale. The results are discussed in the context of the ways in which our study could advance synthetic chemistry, as well as processes relevant to the atmosphere.

One-Pot Synthesis of 1-Aryl-3-trifluoromethylpyrazoles Using Nitrile Imines and Mercaptoacetaldehyde As a Surrogate of Acetylene.

A synthetically useful approach for one-pot preparation of 1-aryl-3-trifluoromethylpyrazoles using in situ generated nitrile imines and mercaptoacetaldehyde applied as 1 equiv of acetylene is presented. This protocol comprises (3 + 3)-annulation of the mentioned reagents to form 5,6-dihydro-5-hydroxy-4H-1,3,4-thiadiazine, followed by cascade dehydration/ring contraction reactions with p-TsCl. In addition, representative nonfluorinated analogues functionalized with Ph, Ac, and CO2Et groups at the C(3)-position of the pyrazole ring were also prepared by the devised method.

Fluorinated Analogues to the Pentuloses of the Pentose Phosphate Pathway.

Fluorinated carbohydrates are valuable tools for enzymological studies due to their increased metabolic stability compared to their non-fluorinated analogues. Replacing different hydroxyl groups within the same monosaccharide by fluorine allows to influence a wide range of sugar-receptor interactions and enzymatic transformations. In the past, this principle was frequently used to study the metabolism of highly abundant carbohydrates, while the metabolic fate of rare sugars is still poorly studied. Rare sugars, however, are key intermediates of many metabolic routes, such as the pentose phosphate pathway (PPP). Here we present the design and purely chemical synthesis of a set of three deoxyfluorinated analogues of the rare sugars d-xylulose and d-ribulose: 1-deoxy-1-fluoro-d-ribulose (1DFRu), 3-deoxy-3-fluoro-d-ribulose (3DFRu) and 3-deoxy-3-fluoro-d-xylulose (3DFXu). Together with a designed set of potential late-stage radio-fluorination precursors, they have the potential to become useful tools for studies on the complex equilibria of the non-oxidative PPP.