Neutral Compounds Research Articles

Highly Strained, Fully π‐Conjugated Porphyrin Cyclophanes: Template‐free Synthesis and Global Aromaticity

Porphyrin‐based nanohoops, nanorings, and cages with fully π‐conjugated structures are highly sought after, but their synthesis remains challenging. Herein, we report the template‐free synthesis of a highly strained, bithiophene‐bridged porphyrin cyclophane (1) from a porphyrin quinone via a stereoselective nucleophilic addition followed by intermolecular Yamamoto coupling strategy. X‐ray crystallographic analyses of 1 and its dication 12+ reveal significantly distorted cyclophane‐like geometries, with calculated strain energies of 51.2 and 80.7 kcal/mol, respectively. While the neutral compound 1 exhibits localized aromaticity, the dication 12+ is globally aromatic, with the porphyrin unit displaying weak antiaromaticity. Additionally, the dication 12+ undergoes nucleophilic addition with chloride, relieving strain. This work presents a novel synthetic strategy for highly strained, fully π‐conjugated systems with intriguing electronic properties and chemical reactivity.

Highly Strained, Fully π-Conjugated Porphyrin Cyclophanes: Template-free Synthesis and Global Aromaticity.

Porphyrin-based nanohoops, nanorings, and cages with fully π-conjugated structures are highly sought after, but their synthesis remains challenging. Herein, we report the template-free synthesis of a highly strained, bithiophene-bridged porphyrin cyclophane (1) from a porphyrin quinone via a stereoselective nucleophilic addition followed by intermolecular Yamamoto coupling strategy. X-ray crystallographic analyses of 1 and its dication 12+ reveal significantly distorted cyclophane-like geometries, with calculated strain energies of 51.2 and 80.7 kcal/mol, respectively. While the neutral compound 1 exhibits localized aromaticity, the dication 12+ is globally aromatic, with the porphyrin unit displaying weak antiaromaticity. Additionally, the dication 12+ undergoes nucleophilic addition with chloride, relieving strain. This work presents a novel synthetic strategy for highly strained, fully π-conjugated systems with intriguing electronic properties and chemical reactivity.

Single-Molecule Conductance of Neutral Closed-Shell and Open-Shell Diradical Indenofluorenes.

Organic diradicals are highly promising candidates as future components in molecular electronic and spintronic devices because of their low spin-orbit coupling. To advance toward final circuit realizations, a thorough knowledge of the behavior of diradicals within a single-molecule junction framework is imperative. In this work, we have measured for the first time the single-molecule conductance of a neutral open-shell diradical compound, a [2,1-b] isomer of indenofluorene (IF). Our results reveal that the conductance of the [2,1-b] isomer is about 1 order of magnitude higher than that of the corresponding closed-shell regioisomer [1,2-b] IF. This is significant, as it fundamentally demonstrates the possibility of forming stable single-molecule junctions using neutral diradical compounds which are also highly conducting. This opens up a new approach to the development of externally addressable spintronic devices operable at room temperature.

B-286 Single Experiment, Single Plate Solid Phase Extraction (SPE) Optimization using 47 Drug Analytes as an Example

Abstract Background SPE of biological matrices isolates analytes of interest from interfering matrix components that can affect LC-MS/MS quantitation. Optimal SPE conditions are dependent upon the sample matrix and analyte properties and typically require multiple experiments to determine optimal conditions for SPE extraction. Here, a 96-well method development plate was utilized to streamline method development for a panel of 47 clinical research drug analytes: 14 antipsychotics, 22 antidepressants and 11 anticonvulsants. Methods An SPE plate with four polymeric sorbents: reversed phase (X), strong and weak cation-exchange and weak anion-exchange mixed-mode phases (X-C, X-CW and X-AW) was used. The 47 drugs analytes were extracted on all four sorbents using three sets of conditions: acidic pretreatment/wash (aq) with basic elution (AB), neutral pretreatment/wash (aq) with neutral elution (NN), and basic pretreatment/wash (aq) with acidic elution (BA). A 50/50 methanol/water wash was also included. Elution used neutral or pH adjusted ethyl acetate/isopropanol or methanol/acetonitrile. A reagent blank, matrix blank, extracted serum samples spiked post-elution (n=2), and spiked serum (n=4) were extracted on each sorbent using each set of conditions. Optimal conditions were determined by calculating absolute percent recovery for each analyte. Results Recovery for antipsychotics was 85-97% using X-CW-AB, except Chlorpromazine (59%). It had better recovery (80%) using X-AB. Recovery for the antidepressants was 75-112% using X-C-AB, except Bupropion (35%) and Selegiline (10%). Bupropion had better recovery (83% and 95%) using X or X-CW and BA. Selegiline had better recovery using X, X-CW and X-AW with BA (83-92%). Anticonvulsants comprise zwitterionic, sulfonamides, neutral, acidic, and basic compounds with widely varying pKa and polarity. Targeting a single method for these analytes is difficult. The best recovery for anticonvulsants used X-CW-AB with several exceptions. Lacosamide, Felbamate, and Levetiracetam are neutral and among the most polar analytes and had 7-31% recovery under all SPE conditions tested. Zwitterionic Gabapentin and Pregabalin had 50-53% recovery from X-CW and X-C sorbents. The stronger protic elution (ammoniated methanol/acetonitrile vs ethyl acetate/isopropanol ) improved solubility for complete elution. Oxcarbazepine had 37% recovery from X-CW-AB, but recovery was 71% under BA conditions. Neutral, polar Zonisamide and Topiramate (Sulfonamide compounds) recovery was 25-26% using X-CW-AB. However, recovery was better (47% and 83%) under NN conditions, suggesting the analytes didn’t undergo complete elution from the X-CW sorbent. A stronger elution solvent would improve recovery from X-CW. Conclusions Most antipsychotics were recovered with X-CW-AB. Most antidepressants could be extracted using X-C-AB. Some analytes had higher recovery using hydrophobic interaction (X) SPE. A single mixed-mode SPE two-step elution protocol using a stronger elution solvent may be feasible. Anticonvulsants had mixed results. Some would require a stronger elution solvent. Some could be included in the other two panels to maximize recovery, but some had low recovery under all conditions tested. The method development plate screened 12 SPE methods for 47 analytes in a single experiment, greatly reducing the time and labor required to identify the best sorbent and starting conditions for SPE extraction optimization for drug analysis. This workflow could be implemented for other SPE method development projects.

Zero‐Bias Anti‐Ohmic Behaviour in Diradicaloid Molecular Wires

AbstractOpen‐shell materials bearing multiple spin centres provide a key route to efficient charge transport in single‐molecule electronic devices. They have narrow energy gaps, and their molecular orbitals align closely to the Fermi level of the metallic electrodes, thus allowing efficient electronic transport and higher conductance. Maintaining and stabilising multiple open‐shell states—especially in contact with metallic electrodes—is however very challenging, generally requiring a continuous chemical or electrochemical potential to avoid self‐immolation of the open‐shell character. To overcome this issue, we designed, synthesised, and measured the conductance of a series of bis(indeno) fused acenes, where stability is imparted by a close‐shell quinoidal conformation in resonance with the diradical electronic configuration. We show here that these compounds have anti‐ohmic behaviour, with conductance increasing with increasing molecular length, at an unprecedented rate and across the entire bias window ( ). Density Functional Theory (DFT) calculations support our findings, showing the rapidly narrowing HOMO–LUMO gap, unique to these diradicaloid structures, is responsible for the observed behaviour. Our results provide a framework for achieving efficient transport in neutral compounds and demonstrate the promise that diradicaloid materials have in single‐molecule electronics, owing to their great stability and unique electronic structure.

LCxSFC Valve Technologies: Guidelines toward a Successful Online Modulation.

Online two-dimensional liquid chromatography can be used under various separation modes but is sometimes limited in terms of orthogonality, especially for the analysis of neutral compounds. The use of SFC in the second dimension offers a wide choice of mobile and stationary phases, suggesting retention properties complementary to those of the first dimension. Initial works on online LCxSFC coupling published in the literature highlighted the first difficulties of solvent compatibility or potential problems with bubbles created by CO2 in loops. The present work highlights the impact of the interface between the LC and SFC dimensions on the performance of the 2D separation. Six different configurations have been evaluated, differing by the addition of a makeup flow in the first dimension, a division, or a separation of flow paths in the second dimension. Their performances with empty loops eliminated the need for complex trapping columns, regardless of the LC mobile phase nature. Injection in partial fill mode was possible without any problems of CO2 bubble formation, solvent miscibility, pressure, or modulation repeatability in each of the studied configurations. Selected configurations even allowed for the use of a mobile phase split upstream of the valve, so that the online LCxSFC configuration could be as flexible as LCxLC instrumentation in terms of the first dimension flow rate or second dimension injected volume. The obtained results allowed for building guidelines presenting the best interfaces to set up depending on the nature of the mobile phases in both dimensions. Two applications on monomers of lignin and industrial polymers confirmed preliminary results on configuration testing and illustrated that online LCxSFC could now be easily implemented. Precision tests on retention time were conclusive and are promising for the future use of this technique in industrial routines.

1,4-diaminophthalazine complexes of Re(CO)3

1,3-Diiminoisoindolines and substituted variants react with hydrazine to produce 1,4-diaminophthalazines. In this paper, we present the chemistry of 1,4-diaminophthalazine and two modified versions with the Re(CO)3 unit. The 1,4-diaminophthalazine ligand forms a bimetallic complex similar to that seen with unmodified phthalazine. In contrast, the semihemiporphyrazine-derived chelating ligands bind Re(CO)3 as neutral bidentate compounds; the freebase pyrazole and indazole modified 1,4-diaminophthalazines exhibit multiple tautomerization states with ionizable protons. Notably, protonation of the meso bridging nitrogen atom reduces the degree of conjugation between the two halves of the chelate, resulting in a diimine-like complex that lacks significant absorption in the visible spectrum due to the abrogation of the low energy metal to ligand charge transfer (MLCT) transition.

Effect of anionic groups in zwitterionic hydrophilic stationary phases on their chromatographic characteristics

The structure of zwitterion has great impact on the separation properties of zwitterionic hydrophilic stationary phases. To better understand the role of anionic groups of zwitterions, a novel carboxybetaine-based zwitterionic monolithic column was first prepared through thermo-initiated copolymerization of functional monomer (3-acrylamidopropyl)-dimethyl-(2-carboxymethyl) ammonium (CBAA) and crosslinker ethylene dimethacrylate (EDMA) within 100 μm ID capillary. The optimal poly(CBAA-co-EDMA) monolithic column exhibited satisfactory mechanical and chemical stability, good repeatability, high column efficiency (96,000 plates/m), and excellent separation performance for different classes of polar compounds (i.e., phenols, monophosphate nucleotides, urea and allantoin). A comparative study was then performed among three zwitterionic hydrophilic stationary phases containing different anionic groups, i.e. poly(CBAA-co-EDMA) (carboxybetaine), poly(2-{2-(methacryloyloxy) ethyldimethylammonium}ethyl n-butyl phosphate-co-EDMA) (phosphocholine), and poly(N,N-dimethyl-N-(3-methacrylamidopropyl)-N-(3-sulfopropyl) ammonium betaine-co-EDMA) (sulfobetaine) using benzoic acid derivatives, amine compounds, nucleobases and nucleosides as model analytes. The carboxybetaine-based monolithic column exhibited much higher positive zeta-potential and hydrophilicity, which endows it with a stronger retention capacity for acidic and neutral compounds, but sulfobetaine-based monolithic column exhibited much higher selectivity and retention capacity for the amines. Moreover, their enrichment efficiencies for N-glycopeptides were also evaluated based on their different hydrophilicity, and it was observed that the poly(CBAA-co-EDMA) monolithic material captured 4-8 times more N-glycopeptides compared to the other two materials.

Immobilised artificial membrane liquid chromatography vs liposome electrokinetic capillary chromatography: Suitability in drug/bio membrane partitioning studies and effectiveness in the assessment of the passage of drugs through the respiratory mucosa

This study pioneers a comparison of the application of biomimetic techniques, immobilised artificial membrane liquid chromatography (IAM LC) and liposome electrokinetic capillary chromatography (LEKC), for the prediction of pulmonary drug permeability. The pulmonary absorption profiles of 26 structurally unrelated drug-like molecules were evaluated using their IAM hydrophobicity index (CHI IAM) measured in IAM LC, and the logarithm of distribution constants (log KLEKC) derived from the LEKC experiments. Lipophilicity (phospholipids) parameters obtained from IAM LC and most LEKC analyses were linearly related to the n-octanol/water partitioning coefficients of the neutral forms (i.e., log Po/w values) to a moderate extent. However, the relationship with distribution coefficients at the experimental pH (7.4) (i.e., log D7.4) were weaker overall for IAM LC data and sigmoidal for some liposome compositions (phosphatidyl choline (PC): phosphatidyl inositol (PI) 85:15 mol% and 90:10 mol%) and concentrations (4 mM) in LEKC. This suggests that phospholipid partitioning supports both hydrophobic and electrostatic interactions occurring between ionised drugs and charged phospholipid moieties. The latter interactions are original when compared to those taking place in the more established n-octanol/water partitioning systems.A stronger correlation (R2 > 0.65) was identified between the LEKC retention parameters, and the experimental apparent lung permeability (i.e., log Papp values) as opposed to the values obtained by IAM LC. Therefore, LEKC offers unprecedented advantages over IAM LC in simulating cell membrane partitioning processes in the pulmonary delivery of drugs. Although LEKC has the advantage of more effectively simulating the electrostatic and hydrophobic forces in drug/pulmonary membrane interactions in vitro, the technique is unsuitable for analysing highly hydrophilic neutral or anionic compounds at the experimental pH. Conversely, IAM LC is useful for analysing compounds spanning a wider range of lipophilicity. Its simpler and more robust implementation, and propensity for high-throughput automation make it a favourable choice for researchers in drug development and pharmacological studies.

Understanding the Role of Entropy in Promoting Electrocatalytic CO2 Reduction

A global push towards increased sustainability requires technologies that enable the long-term storage of renewable electricity and the sustainable synthesis of chemicals. The electrochemical reduction of CO2 to fuels and chemicals represents a promising avenue to meet these goals. Yet, despite extensive research, many fundamental aspects of the interfacial interactions that enable this reaction remain unclear. One simple question that has not been addressed to date is the mechanism through which the applied potential controls the rate of CO2 reduction. To provide insight, we measured CO2 reduction activation energies on Ag electrodes in the presence of different cations. Building on our earlier work (J. Am. Chem. Soc. 2016, 138, 25, 7820–7823), where some of us demonstrated the important role of structural modifications to imidazolium cations in controlling the rate of CO2 reduction reactions, we expected that these structural modifications impact the reaction rate through changes to the activation energy. However, our findings revealed a much more fascinating picture of the impact of imidazolium cations on CO2 reduction rates.By measuring the activation energy in the presence of imidazolium cations with different structural features, we find that introducing 1-ethly-3-methylimidazolium (EMIM) results in an apparent activation energy of zero. Under these conditions, the applied potential modifies the reaction rate solely through changes to the pre-exponential factor of the Arrhenius equation.Based on literature on homogeneous catalysis, we suggest that our finding indicates that the rate of CO2 reduction in the presence of EMIM is entirely controlled by the formation entropy of the CO2 reduction transition state, with the potential likely influencing the rate by modifying the degree of ordering of imidazolium cations at the electrode surface. We further show that proton abstraction from EMIM forms a neutral compound, resulting in the elimination of the rate enhancement. Our results provide important new insight into the mechanism through which the applied potential controls the rate of electrocatalytic reactions and we expect them to be of broad importance to a better understanding of the connection between interface structure and electrocatalytic rates.

Calix[2]azolium[2]benzimidazolone hosts for selective binding of neutral substrates in water

The separation and purification of chemical raw materials, particularly neutral compounds with similar physical and chemical properties, represents an ongoing challenge. In this study, we introduce a class of water-soluble macrocycle compound, calix[2]azolium[2]benzimidazolone (H), comprising two azolium and two benzimidazolone subunits. The heterocycle subunits form a hydrophobic binding pocket that enables H1 to encapsulate a series of neutral guests in water with 1:1 or 2:1 stoichiometry, including aldehydes, ketones, and nitrile compounds. The host-guest complexation in the solid state was further confirmed through X-ray crystallography. Remarkably, H1 was shown to be a nonporous adaptive crystal material to separate valeraldehyde from the mixture of valeraldehyde/2-methylbutanal/pentanol with high selectivity and recyclability in the solid states. This work not only demonstrates that azolium-based macrocycles are promising candidates for the encapsulation of organic molecules but also shows the potential application in separation science.

Electrochemical Hydrogen Peroxide Generation and Activation Using a Dual-Cathode Flow-Through Treatment System: Enhanced Selectivity for Contaminant Removal by Electrostatic Repulsion.

To oxidize trace concentrations of organic contaminants under conditions relevant to surface- and groundwater, air-diffusion cathodes were coupled to stainless-steel cathodes that convert atmospheric O2 into hydrogen peroxide (H2O2), which then was activated to produce hydroxyl radicals (·OH). By separating H2O2 generation from its activation and employing a flow-through electrode consisting of stainless-steel fibers, the two processes could be operated efficiently in a manner that overcame mass-transfer limitations for O2, H2O2, and trace organic contaminants. The flexibility resulting from separate control of the two processes made it possible to avoid both the accumulation of excess H2O2 and the energy losses that take place after H2O2 has been depleted. The decrease in treatment efficacy occurring in the presence of natural organic matter was substantially lower than that typically observed in homogeneous advanced oxidation processes. Experiments conducted with ionized and neutral compounds indicated that electrostatic repulsion prevented negatively charged ·OH scavengers from interfering with the oxidation of neutral contaminants. Energy consumption by the dual-cathode system was lower than values reported for other technologies intended for small-scale drinking water treatment systems. The coordinated operation of these two cathodes has the potential to provide a practical, inexpensive way for point-of-use drinking water treatment.

Separation of weak acids, neutral compounds, and permanent anions using sequential elution liquid chromatography with tandem columns

This paper discusses the development of an analytical method by an alternative separation approach, sequential elution liquid chromatography (SE-LC), to separate permanently charged ions (anions), weak acids, and neutral compounds using anion exchange and reversed-phase columns in tandem. SE-LC separates classes of compounds by group by employing two or more elution modes. Advantages to using SE-LC over conventional HPLC are a greater peak capacity and a reduced separation disorder. Importantly, the same HPLC as used for a conventional HPLC separation may be used to afford a successful SE-LC separation. Mobile phase selection and gradient optimization are integral for a successful SE-LC class separation of permanent anions, weak acids, and neutral compounds and will be discussed in detail in this paper. The most successful (best resolution and repeatability) SE-LC separation was achieved by applying isocratic elution at low pH to elute the weak acids, followed by an acetonitrile gradient to elute the neutral compounds, and last a sodium methanesulfonate gradient to elute the anionic compounds using a superficially porous C18 column coupled with a strong anion exchange (SAX) column. Repeatability (RSD) in the retention times and peak areas of the analytes was less than 0.25 % and 1.5 %, respectively.

Zero-Bias Anti-Ohmic Behaviour in Diradicaloid Molecular Wires.

Open-shell materials bearing multiple spin centres provide a key route to efficient charge transport in single-molecule electronic devices. They have narrow energy gaps, and their molecular orbitals align closely to the Fermi level of the metallic electrodes, thus allowing efficient electronic transport and higher conductance. Maintaining and stabilising multiple open-shell states-especially in contact with metallic electrodes-is however very challenging, generally requiring a continuous chemical or electrochemical potential to avoid self-immolation of the open-shell character. To overcome this issue, we designed, synthesised, and measured the conductance of a series of bis(indeno) fused acenes, where stability is imparted by a close-shell quinoidal conformation in resonance with the diradical electronic configuration. We show here that these compounds have anti-ohmic behaviour, with conductance increasing with increasing molecular length, at an unprecedented rate and across the entire bias window ( ). Density Functional Theory (DFT) calculations support our findings, showing the rapidly narrowing HOMO-LUMO gap, unique to these diradicaloid structures, is responsible for the observed behaviour. Our results provide a framework for achieving efficient transport in neutral compounds and demonstrate the promise that diradicaloid materials have in single-molecule electronics, owing to their great stability and unique electronic structure.

Phytocannabinoid profile and potency of cannabis resin (hashish) of northwest Himalayas of India.

Cannabis is one of the most consumed illicit drugs and the potency of cannabis products is of note due to health-related concerns. Hand-rubbed hashish is the ancient technique of extracting psychoactive resin from cannabis plants and is practiced in the Indian Himalayas. This study establishes the cannabinoid profile and potency of hand-rubbed hashish collected from 20 regions of the northwest Himalayas. Fifty-eight hashish samples were analyzed using a validated high-performance liquid chromatography-diode array detection (HPLC-DAD) method. Ten cannabinoids were quantified including acidic (THCA & CBDA), and neutral compounds (CBDV, THCV, CBD, CBG, CBN, Δ9-THC, Δ8-THC, and CBC). The mean concentration (w/w%) of Δ9-THC is 26%; THCA is 15% and THCTotal is 40% is observed in the studied hashish samples. The majority (70%) of the hashish samples were categorized in chemotype I with the THC:CBD:CBN ratio of 91:3:4, and the remaining 30% were categorized under chemotype II with the ratio of 76:15:8. Diverse qualities of hashish are produced in the studied regions as per the seed, plant selection, and skills of manual rubbing, which results in potency variations. The average difference between the least and highest potent hand-rubbed hashish of a region is 27 w/w% (THCTotal). The other studied non-psychoactive cannabinoids have a mean w/w% of <5%, followed by 6% of CBDA. It is concluded that the cultivated and wild cannabis fields in the northwest Himalayas belong to the drug-type cannabis subspecies. Hand-rubbed hashish holds traditional significance and impacts the current policies of legislation.

Evaluation of the Goss-modified solvation parameter model for the characterization of biphasic systems and descriptor assignments

The solvation parameter model uses six descriptors identified as excess molar refraction, E, dipolarity/polarizability, S, overall hydrogen-bond acidity, A, overall hydrogen-bond basicity, B, McGowan's characteristic volume, V, and the gas-liquid partition constant on hexadecane at 25 °C, L to model the distribution of neutral compounds in biphasic systems. Abraham's version of this model uses all six descriptors with two separate linear free energy relationship models for the transfer of compounds from a gas phase to a condensed phase and between condensed phases. Goss proposed a modification to this model that uses a single calibration model regardless of the physical state for each phase and five of the descriptors employed in Abraham's model (E descriptor is eliminated). The capability of Abraham's model and the Goss-modified model to characterize the contribution of intermolecular interaction to retention for gas and reversed-phase liquid chromatographic systems and distribution in liquid-liquid partition systems is evaluated using the WSU compound descriptor database. These more accurate values for the Abraham descriptors have not been utilized previously for the evaluation of the Goss-modified model and should be more capable of discerning subtle differences in model performance. It is shown that model quality defined by statistical parameters favors Abraham's model over the Goss-modified model with differences in model quality greater for systems in which Abraham's model indicates a significant contribution from electron lone pair interactions and for systems in which one phase is a solvent containing perfluoroalkyl substituents. There is a small systematic difference for the terms describing the combined contributions of cavity formation and dispersion interactions and for interactions of a dipole-type. The contribution of hydrogen-bonding interactions is virtually identical for the two models. The model intercepts are generally different and potentially assigned to a larger contribution from lack-of-fit for the Goss-modified model. Although the Abraham model descriptors have been routinely employed for applications using the Goss-modified model the possibility that Goss-model specific descriptors should be employed was evaluated. Using the Solver method and Goss-model specific calibration models for chromatographic and liquid-liquid partition systems a new set of Goss-specific descriptors was calculated for 28 varied compounds. These descriptors show good statistical agreement with the Abraham descriptor values with an average deviation of 0.009, -0.003, -0.004, and -0.023, respectively, for the S, A, B, and L descriptors, corresponding to a relative absolute deviation in percent of 2.2 %, 3.9 %, 4.3 %, and 1.2 %, respectively.

Heteronuclear Complexes of Hg(II) and Zn(II) with Sodium Monensinate as a Ligand.

The commercial veterinary antibiotic sodium monensinate (MonNa) binds mercury(II) or zinc(II) cations as thiocyanate [Hg(MonNa)2(SCN)2] (1) or isothiocyanate [Zn(MonNa)2(NCS)2] (2) neutral coordination compounds. The structure and physicochemical properties of 1 and 2 were evaluated by the methods of single crystal and/or powder X-ray diffraction, infrared, nuclear magnetic resonance, X-ray photoelectron spectroscopies, and electrospray-mass spectrometry. The primary cores of the two complexes comprise HgS2O2 (1) and ZnN2O2 (2) coordination motifs, respectively, due to the ambidentate binding modes of the SCN-ligands. The directly bound oxygen atoms originate from the carboxylate function of the parent antibiotic. Sodium cations remain in the hydrophilic cavity of monensin and cannot be replaced by the competing divalent metal ions. Zinc(II) binding does not influence the monensin efficacy in the case of Bacillus cereus and Staphylococcus aureus whereas the antimicrobial assay reveals the potential of complex 2 as a therapeutic candidate for the treatment of infections caused by Bacillus subtilis, Kocuria rhizophila, and Staphylococcus saprophyticus.

Chemical Characterisation of New Oils Extracted from Cañihua and Tarwi Seeds with Different Organic Solvents.

Vegetable oils are rich in health-beneficial compounds, including fatty acids, phenolic compounds, natural antioxidants, and fat-soluble vitamins. However, oil extraction methods can influence their composition. This study aims to understand the chemical basis for developing a green process to extract oils from two Andean seeds, cañihua (Chenopodium pallidicaule) and tarwi (Lupinus mutabilis). Ethanol, considered a green solvent, is compared to petroleum ether used at the laboratory level and hexane used at the industrial scale for extracting oils. The extraction efficiency is assessed in terms of yield, fatty acids profile, polar and neutral lipids, tocopherols, phenolic compounds, and antioxidant capacity. The chemical composition of edible commercial oils, such as sunflower, rapeseed, and olive oils, was used as a reference. Hexane had the highest extraction yield, followed by petroleum ether and ethanol. However, the oils extracted with ethanol having yields of tarwi 15.5% and cañihua 5.8%, w/w showed the significatively superior content of tocopherols (α, γ, and δ); phenolic compounds; and antioxidant capacity. In addition, ethanol-extracted (EE) oils have higher levels of polar lipids, such as phosphatidylcholine and phosphatidylinositol, than those extracted with the other solvents. Remarkably, EE oils presented comparable or slightly higher levels of monounsaturated fatty acids than those extracted with hexane. Finally, compared to the commercial oils, tarwi and cañihua EE oils showed lower but acceptable levels of oleic, linoleic and palmitic acids and a wider variety of fatty acids (10 and 13, respectively). The composition of tarwi and cañahua oils extracted with ethanol includes compounds associated with nutritional and health benefits, providing a sustainable alternative for oil production.

Emerging Rare Earth Element Separation Technologies

Rare earth elements are essential for numerous clean energy applications, yet their mining, separation, and processing pose significant environmental challenges. Traditional separation processes often result in ecological damage, highlighting the critical need for innovative techniques that reduce environmental impacts. This article reviews recent advancements in rare earth separation technologies, with a particular focus on the role of neutral organic compounds. It explores how these compounds change selectivity across the rare earth series, offering promising strategies for designing more effective rare earth element separation systems. Furthermore, the article points out research areas requiring additional investigation to improve the sustainability of these critical processes.

Chemosensory analysis of emotional wines: Merging of explicit and implicit methods to measure emotions aroused by red wines

Wine is a cultural product capable of arousing emotions. Measuring emotions and figuring out how much they could influence preferences or purchase decisions of consumers is a new trend in sensory and consumer research. However, the complexity of feelings makes the measure of emotions extremely challenging. Thus, a comprehensive understanding of emotions related to sensory stimuli in wine tasting is still missing. The purpose of the study is to evaluate the emotional power of tasting red wines using a multidisciplinary approach, combining sensory analysis performed by trained panelists, implicit and explicit measurements of emotions and chemical analysis of the wines tasted. Various red wines, renowned for their high polyphenol content and expected to exhibit rich texture, mouthfeel, and aging potential, have been utilized to this extent. The results obtained showed that the emotions measured were well-correlated with quantitative and hedonic attributes obtained using classic sensory analysis. Some aromatic molecules can be identified as markers capable of eliciting positive and negative emotional reactions. While increasing literature in the topic is recently available, our study appears to be the first highlighting the presence of autonomic nervous system (ANS) differences verified by means of electrocardiogram (ECG) features, related to explicit and complete sensory patterns, in response to sensory stimuli related to emotional wine, with higher sympathetic values at extrema and vagal increase in the presence of neutral sensory compounds.