Polymer Network Research Articles

Tuning the Emission of Bis-ethylenedioxythiophene-thiophenes upon Aggregation.

The ability of small lipophilic molecules to penetrate the blood-brain barrier through transmembrane diffusion has enabled researchers to explore new diagnostics and therapies for brain disorders. Until now, therapies targeting the brain have mainly relied on biochemical mechanisms, while electrical treatments such as deep brain stimulation often require invasive procedures. An alternative to implanting deep brain stimulation probes could involve administering small molecule precursors intravenously, capable of crossing the blood-brain barrier, and initiating the formation of conductive polymer networks in the brain through in vivo polymerization. This study examines the aggregation behavior of five water-soluble conducting polymer precursors sharing the same conjugate core but differing in side chains, using spectroscopy and various computational chemistry tools. Our findings highlight the significant impact of side chain composition on both aggregation and spectroscopic response.

Nanomaterials for diabetes: diagnosis, detection and delivery.

537 million people worldwide suffer from diabetes mellitus, a problem of glucose management that is related to a number of major health risks, including cardiovascular diseases. There is a need for new, efficient formulations of diabetic medications to address this condition and its related consequences because existing treatments have a number of drawbacks and limits. This encouraged the development of treatment plans to get around some of these restrictions, like low therapeutic drug bioavailability or patients' disobedience to existing therapies. Approaches based on nanotechnology have a lot of promise to enhance the treatment of diabetic patients. In order to manage blood glucose, this review article highlights recent developments and explores the potential applications of different materials (polymeric, ceramic, dendrimers, etc.) as nanocarriers for the delivery of insulin and other antidiabetic medications. Using an injectable and acid-degradable polymeric network produced by the electrostatic interaction of oppositely charged dextran nanoparticles loaded with insulin and glucose-specific enzymes, we reviewed a glucose-mediated release approach for the self-regulated delivery of insulin, in which, after a degradable nano-network was subcutaneously injected into type 1 diabetic mice,in vivoexperiments confirmed that these formulations improved glucose management. In addition, a discussion of silica-based nanocarriers, their potential for treating diabetes and controlling blood glucose levels, and an explanation of the role of dendrimers in diabetes treatment have been covered. This is done by utilizing the properties of silica nanoparticles, such as their tuneable particle and pore size, surface chemistry, and biocompatibility. The article summarized the significance of nanomaterials and their uses in the diagnosis and treatment of diabetes overall, illuminating the field's potential and outlining its prospects for the future.

3D printable and mechanically tunable hydrogels achieved through hydrophobic and ionic interactions.

Thermal stiffening materials are commonly applied in the aerospace and automotive industries, among others, since their dimensional stabilities and stiffness characteristics improve at high temperatures. In this study, temperature-triggered modulus-tunable hydrogels were prepared by combining Pluronic F-127 with charged polymers. Pluronic F-127, a triblock copolymer micelle, provided three-dimensional printing capabilities of fine resolution with high viscosity, while hydrophobic and ionic interactions among polymer networks provided thermal stiffening. The hydrogel ink's printability was demonstrated by successfully creating complex 3D structures. A calcium ion carrying a hydrophobic propionate and carboxylate group in polymer chains was used to form additional physical crosslinking at high temperature, ultimately leading to the thermal stiffening effect without volume change. The thermal stiffening behavior was found to be fully reversible and repeatable. Finally, to demonstrate the versatility of this work, graphene oxide was added to produce a light-controllable modulus based on its photothermal properties.

Real-Space Visualization of Charged Polymer Network of Hydrogel by Double Network Strategy and Mineral Staining.

Hydrogels consist of three-dimensional (3D) and complicated polymer networks that determine their physical properties. Among the methods for structural analyses of hydrogels, the real-space imaging of a polymer network of hydrogels on a nanometer scale is one of the optimal methods; however, it is highly challenging. In this study, we propose a direct observation method for cationic polymer networks using transmission electron microscopy (TEM). By combining the double network strategy and the mineral staining technique, we overcame the challenges of polymer aggregation and the low electron density of the polymer. An objective cationic network was incorporated into a neutral skeleton network to suppress shrinkage during subsequent staining. Titania mineralization along the cationic polymer strands provided sufficient electron density for the objective polymer network for TEM observation. This observation method enables the visualization of local structures in real space and plays a complementary role to scattering methods for soft matter structure analysis.

Dielectric Elastomer Network with Large Side Groups Achieves Large Electroactive Deformation for Soft Robotic Grippers

AbstractDielectric elastomer actuators (DEAs) face an acknowledged challenge: On the one hand, the majority of elastomers only achieve small electroactive deformation (<20%) in the absence of prestretch; on the other hand, rare elastomers capable of showing large electroactive deformation require relatively complicated processing and chemistry. This work addresses this challenge by fabricating an elastomer with a network of large side groups, which achieves a very large electroactive deformation (218%) without pre‐stretch. This elastomer can be rapidly and massively fabricated within a few min, by polymerizing a commercial monomer with a large alkyl side group. The large side groups in the polymer network repel each other and extend the load‐bearing strands, which results in a pronounced strain‐hardening behavior. This behavior helps the elastomer to get rid of electromechanical instability during actuation and hence to exhibit a large electro‐active deformation, a high energy density (>> human muscle), and a large output force (≈500 times self‐weight). the elastomer capable of manufacturing a soft electroactive gripper is demonstrated with large deformation, large force, and rapid response, which enables grasping fragile objects of various complex shapes in an agile away.

Molecularly Shielded, On-Demand, Ultrasound-Cured Polymer Networks

Molecularly Shielded, On-Demand, Ultrasound-Cured Polymer Networks

Molecular-Network Transformations in Tetra-Arsenic Triselenide Glassy Alloys Tuned within Nanomilling Platform

Polyamorphic transformations driven by high-energy mechanical ball milling (nanomilling) are recognized in a melt-quenched glassy alloy of tetra-arsenic triselenide (As4Se3). We employed XRPD analysis complemented by thermophysical heat-transfer and micro-Raman spectroscopy studies. A straightforward interpretation of the medium-range structural response to milling-driven reamorphization is developed within a modified microcrystalline model by treating diffuse peak-halos in the XRPD patterns of this alloy as a superposition of the Bragg-diffraction contribution from inter-planar correlations, which are supplemented by the Ehrenfest-diffraction contribution from inter-atomic and/or inter-molecular correlations related to derivatives of thioarsenide As4Sen molecules, mainly dimorphite-type As4Se3 ones. These cage molecules are merely destroyed under milling, facilitating the formation of a polymerized network with enhanced calorimetric heat-transfer responses. Disruption of intermediate-range ordering, due to weakening of the FSDP (the first sharp diffraction peak), accompanied by an enhancement of extended-range ordering, due to fragmentation of structural entities responsible for the SSDP (the second sharp diffraction peak), occurs as an interplay between medium-range structural levels in the reamorphized As4Se3 glass alloy. Nanomilling-driven destruction of thioarsenide As4Sen molecules followed by incorporation of their remnants into a glassy network is proved by micro-Raman spectroscopy. Microstructure scenarios of the molecular-to-network polyamorphic transformations caused by the decomposition of the As4Se3 molecules and their direct destruction under grinding are recognized by an ab initio quantum-chemical cluster-modeling algorithm.

UV‐cured epoxy‐acrylate interpenetrating polymer networks with different contents of epoxidized soybean oil

AbstractThis work aims to study the effect of epoxidized soybean oil (ESO) concentration on the process of formation and characteristics of UV‐cured ternary epoxy‐acrylate interpenetrating polymer networks (IPNs). Whereas the amount of triethylene glycol dimethacrylate (TEGDMA) keeps constant, the one of ESO incorporated to substitute the respective quantity of diglycidyl ether of bisphenol A (DGEBA) is equal to 10, 20, and 30 parts by weight (pbw). A total of 30 pbw of ESO is found to be the most effective content for altering the conversion degree of epoxy groups and for enhancing the impact resistance of cured materials while providing their transparency. The addition of ESO induces the decrease in cross‐linking density and in the values of glass transition temperature. The samples exhibite good water and chemical resistance with some variations dependent on their composition. Thermooxidative stability of the specimens gradually reduces as the content of aromatic epoxy decreases. Overall, the introduction of ESO into epoxy‐acrylate IPNs not only lessens the fraction of synthetic epoxide but also facilitates the photopolymerization process of DGEBA and diminishes its brittleness. Considering fine atmospheric resistance testified by accelerated weathering test, given materials may be purposed as transparent films or protective coatings for both indoor and outdoor applications.

In Situ Electropolymerizing Toward EP-CoP/Cu Tandem Catalyst for Enhanced Electrochemical CO2-to-Ethylene Conversion.

Electrochemical CO2 reduction has garnered significant interest in the conversion of sustainable energy to valuable fuels and chemicals. Cu-based bimetallic catalysts play a crucial role in enhancing *CO concentration on Cu sites for efficient C─C coupling reactions, particularly for C2 product generation. To enhance Cu's electronic structure and direct its selectivity toward C2 products, a novel strategy is proposed involving the in situ electropolymerization of a nano-thickness cobalt porphyrin polymeric network (EP-CoP) onto a copper electrode, resulting in the creation of a highly effective EP-CoP/Cu tandem catalyst. The even distribution of EP-CoP facilitates the initial reduction of CO2 to *CO intermediates, which then transition to Cu sites for efficient C─C coupling. DFT calculations confirm that the *CO enrichment from Co sites boosts *CO coverage on Cu sites, promoting C─C coupling for C2+ product formation. The EP-CoP/Cu gas diffusion electrode achieves an impressive current density of 726mAcm-2 at -0.9V versus reversible hydrogen electrode (RHE), with a 76.8% Faraday efficiency for total C2+ conversion and 43% for ethylene, demonstrating exceptional long-term stability in flow cells. These findings mark a significant step forward in developing a tandem catalyst system for the effective electrochemical production of ethylene.

Theoretical insights into the interplay between metal-organic and covalent bonding in single-layer molecular networks formed by halogen dissociation.

Synthesis via dehalogenative coupling due to thermal annealing is one of the most common routes of growing metal-organic and covalent polymer networks on catalytic metal surfaces. We present a computational approach taking into account both metal-coordinated and covalent C-C bonding interactions, which drive the self-assembly of tetrabrominated polyarene molecules into single-layer ordered and disordered nanostructures. The proposed coarse-grained lattice model is simulated using the Monte Carlo method. We investigate the annealing effect in ensembles of nearly and fully dehalogenated molecules, accordingly decreasing the concentration of dissociated (chemisorbed) halogen atoms, to account for the desorption process. The results suggest that dissociated halogens may be at least partially responsible for fragmentation of metal-organic networks on the Cu and Au surfaces. The simulations also show that fragmented covalent networks are mostly disordered or characterized by short-range glass-like order, but larger domains of these phases can be obtained after removing the split off Br atoms. We additionally examine the potential formation of fragments with a hybrid structure consisting of oligomer chains linked side-to-side by metal adatoms.

MXene, protein, and KCl-assisted ionic conductive hydrogels with excellent anti-freezing capabilities, self-adhesive, ultra-stretchability, and remarkable mechanical properties for a high-performance wearable flexible sensor.

Developing a hydrogel with switchable features and freeze tolerance is remarkably significant for designing flexible electronics to adjust various application needs. Herein, MXenes, AFPs (antifreeze proteins), and potassium chloride (KCl) were introduced to a polyacrylamide (PAM) polymer network to design an anti-freezing hydrogel. The ionic hydrogels are characterized by excellent ionic conductivity, presenting adjustable properties of remarkable mechanical strength and self-adhesion to meet individualized application demands. The capability of KCl and AFPs to inhibit ice crystals gives hydrogels with anti-icing properties under a low-temperature atmosphere. The PAM/MXene15/AFP30/KCl15 hydrogel demonstrated negligible hysteresis behavior, quick electromechanical response (0.10 s), and excellent sensitivity (gauge factor (GF) = 13.1 within the strain range of 1200-2000%). The resulting hydrogel could be immobilized on the animal or human skin to detect different body movements and physiological motions, offering reproducibility and precise accuracy as primary advantages. The approach of developing materials with tunable features, along with inorganic salt and the fish-inspired freeze-tolerance method, offers a new prospect for wearable gadgets.

Atomic-molecular perspectives on local high-temperature structure and transport properties of CaCO3-foamed glass

Significant gaps remain in understanding of gas-melt interfaces in foamed glass systems. We attempt to address these gaps by reporting on the transition of local structure, ionic (molecular) diffusion, and melt viscosity of CaCO3-foamed soda-lime-silica glass using molecular dynamics calculations and experimental analyses. Our calculations show that despite the continual increase in network modifying CaO, the melt network experiences an abnormal polymerization process in the initial stage because of Na ion penetration from the melt skeleton to the interface. The percolation probability decays from the surface to the center of melt because of the gradual polymerized network structure, boosting nonmonotonic changes in the [SiO4] species, equilibrium constants, and average residual charge per O atom. Furthermore, the diffusion capacities of melt ions and CO2 molecules peak at 6 wt% CaCO3 addition, attributed to the combined effects of melt depolymerization and interface constraint. The viscosity jump occurring at 1 wt% CaCO3 addition results in the optimal sample with an even cellular glass framework and strong matrix. These findings contribute to the precise control of foamed glass with optimal performance.

Molecular Ball Joints: Mechanochemical Perturbation of Bullvalene Hardy-Cope Rearrangements in Polymer Networks.

The solution-state fluxional behavior of bullvalene has fascinated physical organic and supramolecular chemists alike. Little effort, however, has been put into investigating bullvalene applications in bulk, partially due to difficulties in characterizing such dynamic systems. To address this knowledge gap, we herein probe whether bullvalene Hardy-Cope rearrangements can be mechanically perturbed in bulk polymer networks. We use dynamic mechanical analysis to demonstrate that the activation barrier to the glass transition process is significantly elevated for bullvalene-containing materials relative to "static" control networks. Furthermore, bullvalene rearrangements can be mechanically perturbed at low temperatures in the glassy region; such behavior facilitates energy dissipation (i.e., increased hysteresis energy) and polymer chain alignment to stiffen the material (i.e., increased Young's modulus) under load. Computational simulations corroborate our work that showcases bullvalene as a reversible "low-force" covalent mechanophore in the modulation of viscoelastic behavior.

Band engineering in two-dimensional porphyrin- and phthalocyanine-based covalent organic frameworks: insight from molecular design

Two-dimensional covalent organic frameworks (2D COFs) represent an emerging class of crystalline polymeric networks, characterized by their tunable architectures and porosity, synthetic adaptability, and interesting optical, magnetic, and electrical properties. The incorporation of porphyrin (Por) or phthalocyanine (Pc) core units into 2D COFs provides an ideal platform for exploring the relationship between the COF geometric structure and its electronic properties in the case of tetragonal symmetry. In this work, on the basis of tight-binding models and density functional theory calculations, we describe the generic types of electronic band structures that can arise in tetragonal COFs. Three tetragonal lattice symmetries are examined: the basic square lattice, the Lieb lattice, and the checkerboard lattice. The potential topological characteristics of each lattice are explored. The Por-/Pc-based COFs exhibit characteristic band dispersions that are directly linked to their lattice symmetries and the nature of the frontier molecular orbitals of their building units. We show that the band dispersions in these COFs can be tailored by choosing specific symmetries of the molecular building units and/or by modulating the relative energies of the core and linker units. These strategies can be extended to a wide array of COFs, offering an effective approach to engineering their electronic properties.

Harnessing extracellular vesicles-mediated signaling for enhanced bone regeneration: novel insights into scaffold design

The increasing prevalence of bone replacements and complications associated with bone replacement procedures underscores the need for innovative tissue restoration approaches. Existing synthetic grafts cannot fully replicate bone vascularization and mechanical characteristics. This study introduces a novel strategy utilizing pectin, chitosan, and polyvinyl alcohol to create interpenetrating polymeric network (IPN) scaffolds incorporated with extracellular vesicles (EVs) isolated from human mesenchymal stem cells (hMSCs). We assess the osteointegration and osteoconduction abilities of these models in vitro using hMSCs and MG-63 osteosarcoma cells. Additionally, we confirm exosome properties through Transmission Electron Microscopy (TEM), immunoblotting, and Dynamic Light Scattering (DLS). In vivo, chick allantoic membrane assay investigates vascularization characteristics. The study did not include in vivo animal experiments. Our results demonstrate that the IPN scaffold is highly porous and interconnected, potentially suitable for bone implants. EVs, approximately 100 nm in size, enhance cell survival, proliferation, alkaline phosphatase activity, and the expression of osteogenic genes. EVs-mediated IPN scaffolds demonstrate promise as precise drug carriers, enabling customized treatments for bone-related conditions and regeneration efforts. Therefore, the EVs-mediated IPN scaffolds demonstrate promise as precise carriers for the transport of drugs, allowing for customized treatments for conditions connected to bone and efforts in regeneration.

A Rheological Study on the Effect of Tethering Pro- and Anti-Inflammatory Cytokines into Hydrogels on Human Mesenchymal Stem Cell Migration, Degradation, and Morphology.

Polymer-peptide hydrogels are being designed as implantable materials that deliver human mesenchymal stem cells (hMSCs) to treat wounds. Most wounds can progress through the healing process without intervention. During the normal healing process, cytokines are released from the wound to create a concentration gradient, which causes directed cell migration from the native niche to the wound site. Our work takes inspiration from this process and uniformly tethers cytokines into the scaffold to measure changes in cell-mediated degradation and motility. This is the first step in designing cytokine concentration gradients into the material to direct cell migration. We measure changes in rheological properties, encapsulated cell-mediated pericellular degradation and migration in a hydrogel scaffold with covalently tethered cytokines, either tumor necrosis factor-α (TNF-α) or transforming growth factor-β (TGF-β). TNF-α is expressed in early stages of wound healing causing an inflammatory response. TGF-β is released in later stages of wound healing causing an anti-inflammatory response in the surrounding tissue. Both cytokines cause directed cell migration. We measure no statistically significant difference in modulus or the critical relaxation exponent when tethering either cytokine in the polymeric network without encapsulated hMSCs. This indicates that the scaffold structure and rheology is unchanged by the addition of tethered cytokines. Increases in hMSC motility, morphology and cell-mediated degradation are measured using a combination of multiple particle tracking microrheology (MPT) and live-cell imaging in hydrogels with tethered cytokines. We measure that tethering TNF-α into the hydrogel increases cellular remodeling on earlier days postencapsulation and tethering TGF-β into the scaffold increases cellular remodeling on later days. We measure tethering either TGF-β or TNF-α enhances cell stretching and, subsequently, migration. This work provides rheological characterization that can be used to design new materials that present chemical cues in the pericellular region to direct cell migration.

An Injectable Hydrogel Composing Anti-Inflammatory and Osteogenic Therapy toward Bone Erosions Microenvironment Remodeling in Rheumatoid Arthritis.

Healing bone erosions in rheumatoid arthritis (RA) remains greatly challenging via biomaterial strategies. Given the unsuccessful innate bone erosion healing due to an inflammatory disorder, over-activated osteoclasts, and impaired osteoblasts differentiation, RA pathogenesis-guided engineering of an innovative hydrogel platform is needed for remodeling osteoimmune and osteogenic microenvironment of bone erosion healing. Herein, in situ adaptable and injectable interpenetrating polymer network (IPN) hydrogel is developed through an ingenious combination of a bio-orthogonal reaction between hyaluronic acid (HA) and collagen, along with effective electrostatic interactions leveraging bisphosphonate (BP)-functionalized HA macromers (HABP) and nanorod shaped zinc (Zn)-doped biphasic calcium phosphate (ZnBCP). IPN hydrogel exhibits exceptional adaptability to the local shape complexity at bone erosions, and by integrating ZnBCP and HABP, a multi-stage releasing platform is engineered, facilitating controlled cargo delivery for remodeling more anti-inflammatory M2 cells and reducing over-activated osteoclastic activities, thereby reconstructing the bone regeneration microenvironment. Sustainedly co-delivering multiple ions (calcium and phosphate) can display excellent osteogenic properties and be conducive to the bone formation process, by effects of osteogenesis-associated cell differentiation. Overall, the introduced bioactive IPN hydrogel therapy remodels the osteoimmune environment by synergistic pro-inflammation-resolving, osteogenesis, and anti-osteoclastic activities, displaying excellent bone reconstruction in the collagen-induced arthritis rabbit model.

Dynamic Recyclable High-Performance Epoxy Resins via Triazolinedione–Indole Click Reaction and Cation–π Interaction Synergistic Crosslinking

Thermosetting plastics exhibit remarkable mechanical properties and high corrosion resistance, yet the permanent covalent crosslinked network renders these materials challenging for reshaping and recycling. In this study, a high-performance polymer film (EI25-TAD5-Mg) was synthesized by combining click chemistry and cation–π interactions. The internal network of the material was selectively constructed through flexible triazolinedione (TAD) and indole via a click reaction. Cation–π interactions were established between Mg2+ and electron-rich indole units, leading to network contraction and reinforcement. Dynamic non-covalent interactions improved the covalent crosslinked network, and the reversible dissociation of cation–π interactions during loading provided effective energy dissipation. Finally, the epoxy resin exhibited excellent mechanical properties (tensile strength of 91.2 MPa) and latent dynamic behavior. Additionally, the thermal reversibility of the C-N click reaction and dynamic cation–π interaction endowed the material with processability and recyclability. This strategy holds potential value in the field of modifying covalent thermosetting materials.

Thermoreversible [2 + 2] Photodimers of Monothiomaleimides and Intrinsically Recyclable Covalent Networks Thereof.

The development of intrinsically recyclable cross-linked materials remains challenged by the inherently unfavorable chemical equilibrium that dictates the efficiency of the reversible covalent bonding/debonding chemistry. Rather than having to (externally) manipulate the bonding equilibrium, we here introduce a new reversible chemistry platform based on monosubstituted thiomaleimides that can undergo complete and independent light-activated covalent bonding and on-demand thermal debonding above 120 °C. Specifically, repeated bonding/debonding of a small-molecule thiomaleimide [2 + 2] photodimer is demonstrated over five heat/light cycles with full conversion in both directions, thereby regenerating its initial monothiomaleimide constituents. This motivated the synthesis of multifunctional thiomaleimide reagents as precursors for the design of covalently cross-linked networks that display intrinsic switching between a monomeric and polymeric state. The resulting materials are shown to covalently dissociate and depolymerize upon heating both in solution and in bulk, thus transforming the densely photo-cross-linked material back into a viscous liquid. Temperature-regulated photorheology evidenced the intrinsic recyclability of the thiomaleimide-based thermosets during multiple cycles of UV cross-linking and thermal de-cross-linking. The thermally reversible photodimerization of thiomaleimides presents a new addition to the designer playground of dynamic polymer networks, providing interesting opportunities for the reprocessing and closed-loop recycling of covalently cross-linked materials.

All solid-state lithium-ion batteries based on designed polyrotaxane-containing networks

Selecting the appropriate polymer structure for use as both a solid electrolyte and catholyte is essential for enhancing the electrochemical performance of all-solid-state lithium metal batteries. In this study, we are pioneering the customization of solid electrolyte and catholyte synthesis based on novel polyrotaxane (PRX)-containing polymer networks by altering the length of the polyether crosslinkers to tune the properties to meet specific needs of different components. On one hand, the modified PRX polymer networks based on the shorter crosslinker show good mechanical strength, high ionic conductivity (7.25 × 10−4 S cm−1) and high lithium ions transference number (0.54) at 60 °C, allowing their use as solid polymer electrolyte (SPE) self-supporting membranes. On the other hand, all-solid-state lithium-ion batteries with this SPE demonstrate a much higher initial capacity (above 160 mAh/g using LiFePO4 as active material at the cathode and lithium metal as anode), and better cycling performance when paired with longer cross-linked PRX as catholytes than the other non-customized combinations all solid lithium-ion batteries. Moreover, the cycling performance of the full cell can be further improved by incorporating different lithium salts in the electrolyte (LiTFSI) and cathode (LiClO4). This work highlights that the customized design of solid electrolytes and catholytes based on polymer networks is an efficient strategy to obtain high-performance all-solid-state lithium metal batteries