Native Cartilage Research Articles

A regenerative approach for temporomandibular joint repair: An invitro and exvivo study.

Current clinical approaches to regenerate temporomandibular joint (TMJ) articulating cartilage defects only treat the symptoms (i.e. pain and dysfunction) and do not seek to restore joint integrity for long-term relief. Therefore, we investigated a novel self-assembling tissue-engineered cartilage to overcome this significant clinical issue for TMJ regenerative purposes. Examine the maturation of dynamic self-regenerating cartilage (dSRC) using auricular chondrocytes and evaluate a novel combinatorial approach with fractional laser treatment and dSRC implantation for TMJ cartilage repair. A suspension of 107 freshly harvested rabbit ear chondrocytes was cultured under a continuous reciprocating motion to form the dSRC. After 2, 4 and 8 weeks of culture, dSRC samples were stained with H&E, Safranin-O and Toluidine Blue. Immunohistochemistry (IHC) was performed for collagens type I and II. Channels (300-500 μm diameter and 1.2-1.5 mm depth) were created in six freshly harvested condyles using a fractional Erbium laser. Two groups were tested: dSRC in a laser-ablated lesion (experimental) and an empty laser-ablated channel (control). TMJ condyles were cultured for up to 8 weeks and analysed as described above. H&E staining showed a high cell density in dSRC compared to native cartilage. All dSRC groups demonstrated intense Safranin-O staining, indicating high glycosaminoglycan (GAG) production and intense Toluidine Blue staining showed high proteoglycan content. IHC confirmed that dSRC consisted predominantly of collagen type II. The experimental group showed improved cartilage repair at both time points compared to the empty channels. dSRC viability and successful matrix formation were demonstrated invitro. The combination of fractional laser ablation and dSRC implantation enhanced cartilage repair.

Collagen and Alginate Hydrogels Support Chondrocytes Redifferentiation In Vitro without Supplementation of Exogenous Growth Factors.

Focal cartilage defects are a prevalent knee problem affecting people of all ages. Articular cartilage (AC) possesses limited healing potential, and osteochondral defects can lead to pain and long-term complications such as osteoarthritis. Autologous chondrocyte implantation (ACI) has been a successful surgical approach for repairing osteochondral defects over the past two decades. However, a major drawback of ACI is the dedifferentiation of chondrocytes during their in vitro expansion. In this study, we isolated ovine chondrocytes and cultured them in a two-dimensional environment for ACI procedures. We hypothesized that 3D scaffolds would support the cells' redifferentiation without the need for growth factors so we encapsulated them into soft collagen and alginate (col/alg) hydrogels. Chondrocytes embedded into the hydrogels were viable and proliferated. After 7 days, they regained their original rounded morphology (aspect ratio 1.08) and started to aggregate. Gene expression studies showed an upregulation of COL2A1, FOXO3A, FOXO1, ACAN, and COL6A1 (37, 1.13, 22, 1123, and 1.08-fold change expression, respectively) as early as day one. At 21 days, chondrocytes had extensively colonized the hydrogel, forming large cell clusters. They started to replace the degrading scaffold by depositing collagen II and aggrecan, but with limited collagen type I deposition. This approach allows us to overcome the limitations of current approaches such as the dedifferentiation occurring in 2D in vitro expansion and the necrotic formation in spheroids. Further studies are warranted to assess long-term ECM deposition and integration with native cartilage. Though limitations exist, this study suggests a promising avenue for cartilage repair with col/alg hydrogel scaffolds.

Enhanced hyaline cartilage formation and continuous osteochondral regeneration via 3D-Printed heterogeneous hydrogel with multi-crosslinking inks

The unique gradient structure and complex composition of osteochondral tissue pose significant challenges in defect regeneration. Restoration of tissue heterogeneity while maintaining hyaline cartilage components has been a difficulty of an osteochondral tissue graft. A novel class of multi-crosslinked polysaccharide-based three-dimensional (3D) printing inks, including decellularized natural cartilage (dNC) and nano-hydroxyapatite, was designed to create a gradient scaffold with a robust interface-binding force. Herein, we report combining a dual-nozzle cross-printing technology and a gradient crosslinking method to create the scaffolds, demonstrating stable mechanical properties and heterogeneous bilayer structures. Biofunctional assessments revealed the remarkable regenerative effects of the scaffold, manifesting three orders of magnitude of mRNA upregulation during chondrogenesis and the formation of pure hyaline cartilage. Transcriptomics of the regeneration site in vivo and scaffold cell interaction tests in vitro showed that printed porous multilayer scaffolds could form the correct tissue structure for cell migration. More importantly, polysaccharides with dNC provided a hydrophilic microenvironment. The microenvironment is crucial in osteochondral regeneration because it could guide the regenerated cartilage to ensure the hyaline phenotype.

A RANDOMIZED CONTROLLED TRIAL EVALUATING AN ACCELERATED WEIGHT-BEARING REHABILITATION PATHWAY AFTER MATRIX-INDUCED AUTOLOGOUS CHONDROCYTE IMPLANTATION FOR SYMPTOMATIC KNEE CARTILAGE DEFECTS

INTRODUCTION & AIMS Matrix-induced autologous chondrocyte implantation (MACI) has demonstrated encouraging outcomes in treating symptomatic knee cartilage lesions which, if untreated, can progress toward early osteoarthritis. Rehabilitation is imperative to optimize outcome, though has been traditionally conservative. This study investigated the long-term outcomes of an accelerated return to full weight bearing (WB) after MACI. METHODS This prospective randomized controlled trial (RCT) allocated 35 patients (37 knees) to a 6-week (n=18) or 8-week (n=19) return to full WB after MACI. Patients were evaluated pre-operatively and at 1, 2, 5 and ≥10 years, via patient-reported outcome measures (PROMs) including the Knee Osteoarthritis Outcome Score (KOOS). Single limb hop capacity and peak knee extensor and flexor torque were assessed, with limb symmetry indices (LSIs) calculated. Magnetic resonance imaging (MRI) evaluated repair tissue, while a validated MRI composite graft score was calculated. RESULTS While the 6-week WB group reported significantly better 1-year KOOS Quality of Life scores, no other differences (p>0.05) in PROMs existed. The peak knee extensor torque LSI significantly improved (p<0.0001) over time, with mean LSIs of 100.8 (6-week) and 99.1 (8-week) at ≥10 years. No group differences (p>0.05) were observed in hop LSIs. A non-significant decline (p>0.05) was observed for the MRI composite score from 1-year to final ≥10-year review and, apart from a significant group effect (p=0.028) for graft tissue intensity in favor of the 6-week group suggesting repair tissue more reflective of native cartilage, no other MRI-based differences (p>0.05) existed. At ≥10-years, no grafts on MRI had failed, though 3 patients (6-week n=1, 8-week n=2) had progressed toward knee arthroplasty. CONCLUSION The 6-week accelerated rehabilitation program provided comparable clinical and MRI-based outcomes beyond 10 years post-surgery, without jeopardizing the graft.

Chondral lesion of the patella in a junior football player: chondral-only fragment fixation

Chondral lesions of the patella are a relatively common pathology that can cause pain and impairment in active young individuals. These lesions can have lifelong consequences, with increased risk of osteoarthritis in some cases. Surgical excision of medium to large fragments is associated with poor long-term outcomes. There is a general belief that fixation of purely chondral lesions in the absences of subchondral bone is associated with low integration rates, however recent case reports and basic science studies have been challenging this belief. In this case report, we describe a young patient with a chondral lesion of the patella and a fragment without subchondral bone, who underwent open fragment reduction and fixation using bioabsorbable pins. The patient had a successful outcome with significant fast improvement in pain and function and full return to practice. This case highlights the potential benefits of conservative surgical management with preservation of the native cartilage, even in the absence of subchondral bone, especially in the young active patient.

Superior strength, highly stretchable, bionic self-healing polyurethane and its composites for flexible conductivity and self-cleaning applications

Balancing the exceptional mechanical strength and repair efficiency of self-healing materials presents a significant challenge to unlocking their full potential in practical applications. Inspired by natural spider silk and cartilage, multiple dynamic hydrogen bonds were introduced into the pre-prepared polyurethane (PU). Then modifided graphene oxide (GO) nanosheets with dynamic hydrogen bonds were added into the prepared PU to form composites (AU-PU/GDU) to establish a dense hydrogen bond network structure, providing strong interfacial interactions. The AU-PU/GDU film exhibits excellent tensile strength (39.6 MPa), high elongation at break (1155.6 %), and outstanding repair efficiency (90.3 %). Using AU-PU/GDU as the flexible base, a superhydrophobic conductive composite coating (F-AU-PU/GDU) with a contact angle greater than 150° was prepared by incorporating superhydrophobic nanomaterials. This work lays the foundation for the development of multifunctional materials through the creation of self-healing superhydrophobic conductive composite coatings, which have a wide range of potential applications.

Evaluation of the consistency of the MRI- based AI segmentation cartilage model using the natural tibial plateau cartilage.

The study aims to evaluate the accuracy of an MRI-based artificial intelligence (AI) segmentation cartilage model by comparing it to the natural tibial plateau cartilage. This study included 33 patients (41 knees) with severe knee osteoarthritis scheduled to undergo total knee arthroplasty (TKA). All patients had a thin-section MRI before TKA. Our study is mainly divided into two parts: (i) In order to evaluate the MRI-based AI segmentation cartilage model's 2D accuracy, the natural tibial plateau was used as gold standard. The MRI-based AI segmentation cartilage model and the natural tibial plateau were represented in binary visualization (black and white) simulated photographed images by the application of Simulation Photography Technology. Both simulated photographed images were compared to evaluate the 2D Dice similarity coefficients (DSC). (ii) In order to evaluate the MRI-based AI segmentation cartilage model's 3D accuracy. Hand-crafted cartilage model based on knee CT was established. We used these hand-crafted CT-based knee cartilage model as gold standard to evaluate 2D and 3D consistency of between the MRI-based AI segmentation cartilage model and hand-crafted CT-based cartilage model. 3D registration technology was used for both models. Correlations between the MRI-based AI knee cartilage model and CT-based knee cartilage model were also assessed with the Pearson correlation coefficient. The AI segmentation cartilage model produced reasonably high two-dimensional DSC. The average 2D DSC between MRI-based AI cartilage model and the tibial plateau cartilage is 0.83. The average 2D DSC between the AI segmentation cartilage model and the CT-based cartilage model is 0.82. As for 3D consistency, the average 3D DSC between MRI-based AI cartilage model and CT-based cartilage model is 0.52. However, the quantification of cartilage segmentation with the AI and CT-based models showed excellent correlation (r = 0.725; P values < 0.05). Our study demonstrated that our MRI-based AI cartilage model can reliably extract morphologic features such as cartilage shape and defect location of the tibial plateau cartilage. This approach could potentially benefit clinical practices such as diagnosing osteoarthritis. However, in terms of cartilage thickness and three-dimensional accuracy, MRI-based AI cartilage model underestimate the actual cartilage volume. The previous AI verification methods may not be completely accurate and should be verified with natural cartilage images. Combining multiple verification methods will improve the accuracy of the AI model.

Low-Temperature Extrusion of Waterborne Polyurethane-Polycaprolactone Composites for Multi-Material Bioprinting of Engineered Elastic Cartilage.

3D bioprinting of elastic cartilage tissues that are mechanically and structurally comparable to their native counterparts, while exhibiting favorable cellular behavior, is an unmet challenge. A practical solution for this problem is the multi-material bioprinting of thermoplastic polymers and cell-laden hydrogels using multiple nozzles. However, the processing of thermoplastic polymers requires high temperatures, which can damage hydrogel-encapsulated cells. In this study, the authors developed waterborne polyurethane (WPU)-polycaprolactone (PCL) composites to allow multi-material co-printing with cell-laden gelatin methacryloyl (GelMA) hydrogels. These composites can be extruded at low temperatures (50-60 °C) and high speeds, thereby reducing heat/shear damage to the printed hydrogel-capsulated cells. Furthermore, their hydrophilic nature improved the cell behavior in vitro. More importantly, the bioprinted structures exhibited good stiffness and viscoelasticity compared to native elastic cartilage. In summary, this study demonstrated low-temperature multi-material bioprinting of WPU-PCL-based constructs with good mechanical properties, degradation time-frames, and cell viability, showcasing their potential in elastic cartilage bio-fabrication and regeneration to serve broad biomedical applications in the future.

Development of a patient specific cartilage graft using magnetic resonance imaging and 3D printing

ObjectivesThe goal of this project was to develop and validate a patient-specific, anatomically correct graft for cartilage restoration using magnetic resonance imaging (MRI) data and 3-dimensional (3D) printing technology. The specific aim was to test the accuracy of a novel method for 3D printing and implanting individualized, anatomically shaped bio-scaffolds to treat cartilage defects in a human cadaveric model. We hypothesized that an individualized, anatomic 3D-printed scaffold designed from MRI data would provide a more optimal fill for a large cartilage defect compared to a generic flat scaffold. MethodsFour focal cartilage defects (FCDs) were created in paired human cadaver knees, age <40 years, in the weight-bearing surfaces of the medial femoral condyle (MFC), lateral femoral condyle (LFC), patella, and trochlea of each knee. MRIs were obtained, anatomic grafts were designed and 3D printed for the left knee as an experimental group, and generic flat grafts for the right knee as a control group. Grafts were implanted into corresponding defects and fixed using tissue adhesive. Repeat post-implant MRIs were obtained. Graft step-off was measured as the distance in mm between the surface of the graft and the native cartilage surface in a direction perpendicular to the subchondral bone. Graft contour was measured as the gap between the undersurface of the graft and the subchondral bone in a direction perpendicular to the joint surface. ResultsGraft step-off was statistically significantly better for the anatomic grafts compared to the generic grafts in the MFC (0.0 ​± ​0.2 ​mm vs. 0.7 ​± ​0.5 ​mm, p ​< ​0.001), LFC (0.1 ​± ​0.3 ​mm vs. 1.0 ​± ​0.2 ​mm, p ​< ​0.001), patella (−0.2 ​± ​0.3 ​mm vs. −1.2 ​± ​0.4 ​mm, p ​< ​0.001), and trochlea (−0.4 ​± ​0.3 vs. 0.4 ​± ​0.7, p ​= ​0.003). Graft contour was statistically significantly better for the anatomic grafts in the LFC (0.0 ​± ​0.0 ​mm vs. 0.2 ​± ​0.4 ​mm, p ​= ​0.022) and trochlea (0.0 ​± ​0.0 ​mm vs. 1.4 ​± ​0.7 ​mm, p ​< ​0.001). The anatomic grafts had an observed maximum step-off of −0.9 ​mm and a maximum contour mismatch of 0.8 ​mm. ConclusionThis study validates a process designed to fabricate anatomically accurate cartilage grafts using MRI and 3D printing technology. Anatomic grafts demonstrated superior fit compared to generic flat grafts. Level of evidenceLevel IV.

Collagen short nanofiber-embedded chondroitin sulfate–hyaluronic acid nanocomposite: A cartilage-mimicking in situ-forming hydrogel with fine-tuned properties

In situ-forming hydrogels that possess the ability to be injected in a less invasive manner and mimic the biochemical composition and microarchitecture of the native cartilage extracellular matrix are desired for cartilage tissue engineering. Besides, gelation time and stiffness of the hydrogel are two interdependent factors that affect cells' distribution and fate and hence need to be optimized. This study presented a bioinspired in situ-forming hydrogel composite of hyaluronic acid (HA), chondroitin sulfate (CS), and collagen short nanofiber (CSNF). HA and CS were functionalized with aldehyde and amine groups to form a gel through a Schiff-base reaction. CSNF was fabricated via electrospinning, followed by fragmentation by ultrasonics. Gelation time (11–360 s) and compressive modulus (1.4–16.2 kPa) were obtained by varying the concentrations of CS, HA, CSNFs, and CSNFs length. The biodegradability and biocompatibility of the hydrogels with varying gelation and stiffness were also assessed in vitro and in vivo. At three weeks, the assessment of hydrogels' chondrogenic differentiation also yields varying levels of chondrogenic differentiation. The subcutaneous implantation of the hydrogels in a mouse model indicated no severe inflammation. Results demonstrated that the injectable CS/HA@CSNF hydrogel was a promising hydrogel for tissue engineering and cartilage regeneration.

Passaged Articular Chondrocytes From the Superficial Zone and Deep Zone Can Regain Zone-Specific Properties After Redifferentiation

Background: Bioengineered cartilage is a developing therapeutic to repair cartilage defects. The matrix must be rich in collagen type II and aggrecan and mechanically competent, withstanding compressive and shearing loads. Biomechanical properties in native articular cartilage depend on the zonal architecture consisting of 3 zones: superficial, middle, and deep. The superficial zone chondrocytes produce lubricating proteoglycan-4, whereas the deep zone chondrocytes produce collagen type X, which allows for integration into the subchondral bone. Zonal and chondrogenic expression is lost after cell number expansion. Current cell-based therapies have limited capacity to regenerate the zonal structure of native cartilage. Hypothesis: Both passaged superficial and deep zone chondrocytes at high density can form bioengineered cartilage that is rich in collagen type II and aggrecan; however, only passaged superficial zone–derived chondrocytes will express superficial zone–specific proteoglycan-4, and only passaged deep zone–derived chondrocytes will express deep zone–specific collagen type X. Study Design: Controlled laboratory study. Methods: Superficial and deep zone chondrocytes were isolated from bovine joints, and zonal subpopulations were separately expanded in 2-dimensional culture. At passage 2, superficial and deep zone chondrocytes were seeded, separately, in scaffold-free 3-dimensional culture within agarose wells and cultured in redifferentiation media. Results: Monolayer expansion resulted in loss of expression for proteoglycan-4 and collagen type X in passaged superficial and deep zone chondrocytes, respectively. By passage 2, superficial and deep zone chondrocytes had similar expression for dedifferentiated molecules collagen type I and tenascin C. Redifferentiation of both superficial and deep zone chondrocytes led to the expression of collagen type II and aggrecan in both passaged chondrocyte populations. However, only redifferentiated deep zone chondrocytes expressed collagen type X, and only redifferentiated superficial zone chondrocytes expressed and secreted proteoglycan-4. Additionally, redifferentiated deep zone chondrocytes produced a thicker and more robust tissue compared with superficial zone chondrocytes. Conclusion: The recapitulation of the primary phenotype from passaged zonal chondrocytes introduces a novel method of functional bioengineering of cartilage that resembles the zone-specific biological properties of native cartilage. Clinical Relevance: The recapitulation of the primary phenotype in zonal chondrocytes could be a possible method to tailor bioengineered cartilage to have zone-specific expression.

Detrimental Effects of Chlorhexidine on Articular Cartilage Viability, Matrix, and Mechanics

Background: Chlorhexidine gluconate (CHG) solution is commonly used as an antiseptic irrigation for bacterial decontamination during orthopaedic surgery. Although the chondrotoxicity of CHG on articular cartilage has been reported, the full extent of CHG-related chondrotoxicity and its effects on the extracellular matrix and mechanical properties are unknown. Purpose: To investigate the in vitro effects of a single 1-minute CHG exposure on the viability, biochemical content, and mechanics of native articular cartilage explants. Study Design: Controlled laboratory study. Methods: Articular cartilage explants (6 per group) were harvested from femoral condyles of the porcine stifle and sectioned at tidemark. Explants were bathed in CHG solution (0.05% CHG in sterile water) at varying concentrations (0% control, 0.01% CHG, and 0.05% CHG) for 1 minute, followed by complete phosphate-buffered saline wash and culture in chondrogenic medium. At 7 days after CHG exposure, cell viability, matrix content (collagen and glycosaminoglycan [GAG]), and compressive mechanical properties (creep indentation testing) were assessed. Results: One-minute CHG exposure was chondrotoxic to explants, with both 0.05% CHG (2.6% ± 4.1%) and 0.01% CHG (76.3% ± 8.6%) causing a decrease in chondrocyte viability compared with controls (97.5% ± 0.6%; P < .001 for both). CHG exposure at either concentration had no significant effect on collagen content, while 0.05% CHG exposure led to a significant decrease in mean GAG per wet weight compared with the control group (2.6% ± 1.7% vs 5.2% ± 1.9%; P = .029). There was a corresponding weakening of mechanical properties in explants treated with 0.05% CHG compared with controls, with decreases in mean aggregate modulus (177.8 ± 90.1 kPa vs 280.8 ± 19.8 kPa; P < .029) and shear modulus (102.6 ± 56.5 kPa vs 167.9 ± 16.2 kPa; P < .020). Conclusion: One-minute exposure to CHG for articular cartilage explants led to dose-dependent decreases in chondrocyte viability, GAG content, and compressive mechanical properties. This raises concern for the risk of mechanical failure of the cartilage tissue after CHG exposure. Clinical Relevance: Clinicians should be judicious regarding the use of CHG irrigation at these concentrations in the presence of native articular cartilage.

Biomechanical properties of articular cartilage in different regions and sites of the knee joint: acquisition of osteochondral allografts

Osteochondral allograft (OCA) transplantation involves grafting of natural hyaline cartilage and supporting subchondral bone into the cartilage defect area to restore its biomechanical and tissue structure. However, differences in biomechanical properties and donor-host matching may impair the integration of articular cartilage (AC). This study analyzed the biomechanical properties of the AC in different regions of different sites of the knee joint and provided a novel approach to OCA transplantation. Intact stifle joints from skeletally mature pigs were collected from a local abattoir less than 8 h after slaughter. OCAs were collected from different regions of the joints. The patella and the tibial plateau were divided into medial and lateral regions, while the trochlea and femoral condyle were divided into six regions. The OCAs were analyzed and compared for Young’s modulus, the compressive modulus, and cartilage thickness. Young’s modulus, cartilage thickness, and compressive modulus of OCA were significantly different in different regions of the joints. A negative correlation was observed between Young's modulus and the proportion of the subchondral bone (r = − 0.4241, P < 0.0001). Cartilage thickness was positively correlated with Young’s modulus (r = 0.4473, P < 0.0001) and the compressive modulus (r = 0.3678, P < 0.0001). During OCA transplantation, OCAs should be transplanted in the same regions, or at the closest possible regions to maintain consistency of the biomechanical properties and cartilage thickness of the donor and recipient, to ensure smooth integration with the surrounding tissue. A 7 mm depth achieved a higher Young's modulus, and may represent the ideal length.

Fabrication of gelatin-heparin based cartilage models: enhancing spatial complexity through refinement of stiffness properties and oxygen availability

The intricate nature of native cartilage, characterized by zonal variations in oxygen levels and ECM composition, poses a challenge for existing hydrogel-based tissue models. Consequently, these 3D models often present simplified renditions of the native tissue, failing to fully capture its heterogenous nature. The combined effects of hydrogel components, network properties, and structural designs on cellular responses are often overlooked. In this work, we aim to establish more physiological cartilage models through biofabrication of photopolymerizable allylated-gelatin (GelAGE) and Thiolated Heparin (HepSH) constructs with tailorable matrix stiffness and customized architectures. This involves systematically studying how the native glycosaminoglycan Heparin together with hydrogel stiffness, and oxygen availability within 3D structures influence chondrogenic differentiation and regional heterogeneity. A comprehensive library of 3D hydrogel constructs was successfully developed, encompassing GelAGE-HepSH hydrogels with three distinct stiffness levels: 12, 55 and 121 kPa, and three unique geometries: spheres, discs, and square lattices. In soft GelAGE-HepSH hydrogels, the localization of differentiating cells was observed to be irregular, while stiff hydrogels restricted the overall secretion of ECM components. The medium-stiff hydrogels were found to be most applicable, supporting both uniform tissue formation and maintained shape fidelity. Three different 3D architectures were explored, where biofabrication of smaller GelAGE-HepSH spheres without oxygen gradients induced homogenous, hyaline cartilage tissue formation. Conversely, fabrication of larger constructs (discs and lattices) with oxygen gradients could be utilized to design heterogenous cartilage tissue models. Similarly, temporal oxygen gradients were observed to drive interconnected deposition of glycosaminoglycans (GAGs). Control samples of GelAGE without HepSH did not exhibit any notable changes in chondrogenesis as a function of stiffness, architectures, or oxygen concentrations. Overall, the incorporation of HepSH within GelAGE hydrogels was observed to serve as an amplifier for the biological effects from both stiffness and oxygen cues. In conclusion, fabrication of GelAGE-HepSH constructs designed to impose limitations on oxygen availability induce more zone-specific cartilage tissue alignment. This systematic study of matrix components, network stiffness, and oxygen levels in 3D biofabricated structures contributes to the development of more physiologically relevant cartilage models while further enhancing our overall understanding of cartilage tissue engineering.

Cellulose nanocrystals-reinforced dual crosslinked double network GelMA/hyaluronic acid injectable nanocomposite cryogels with improved mechanical properties for cartilage tissue regeneration.

Improvement of mechanical properties of injectable tissue engineering scaffolds is a current challenge. The objective of the current study is to produce a highly porous injectable scaffold with improved mechanical properties. For this aim, cellulose nanocrystals-reinforced dual crosslinked porous nanocomposite cryogels were prepared using chemically crosslinked methacrylated gelatin (GelMA) and ionically crosslinked hyaluronic acid (HA) through the cryogelation process. The resulting nanocomposites showed highly porous structures with interconnected porosity (>90%) and mean pore size in the range of 130-296 μm. The prepared nanocomposite containing 3%w/v of GelMA, 20 w/w% of HA, and 1%w/v of CNC showed the highest Young's modulus (10 kPa) and excellent reversibility after 90% compression and could regain its initial shape after injection by a 16-gauge needle in the aqueous media. The in vitro results demonstrated acceptable viability (>90%) and migration of the human chondrocyte cell line (C28/I2), and chondrogenic differentiation of human adipose stem cells. A two-month in vivo assay on a rabbit's ear model confirmed that the regeneration potential of the prepared cryogel is comparable to the natural autologous cartilage graft, suggesting it is a promising alternative for autografts in the treatment of cartilage defects.

Injectable Bioadhesive Photocrosslinkable Hydrogels with Sustained Release of Kartogenin to Promote Chondrogenic Differentiation and Partial-Thickness Cartilage Defects Repair.

Partial-thickness cartilage defect (PTCD) is a common and formidable clinical challenge without effective therapeutic approaches. The inherent anti-adhesive characteristics of the extracellular matrix within cartilage pose a significant impediment to the integration of cells or biomaterials with the native cartilage during cartilage repair. Here, an injectable photocrosslinked bioadhesive hydrogel, consisting of gelatin methacryloyl (GM), acryloyl-6-aminocaproic acid-g-N-hydroxysuccinimide (AN), and poly(lactic-co-glycolic acid) microspheres loaded with kartogenin (KGN) (abbreviated as GM/AN/KGN hydrogel), is designed to enhance interfacial integration and repair of PTCD. After injected in situ at the irregular defect, a stable and robust hydrogel network is rapidly formed by ultraviolet irradiation, and it can be quickly and tightly adhered to native cartilage through amide bonds. The hydrogel exhibits good adhesion strength up to 27.25 ± 1.22kPa by lap shear strength experiments. The GM/AN/KGN hydrogel demonstrates good adhesion, low swelling, resistance to fatigue, biocompatibility, and chondrogenesis properties in vitro. A rat model with PTCD exhibits restoration of a smoother surface, stable seamless integration, and abundant aggrecan and type II collagen production. The injectable stable adhesive hydrogel with long-term chondrogenic differentiation capacity shows great potential to facilitate repair of PTCD.

Costal Chondrocyte–Derived Pellet-Type Autologous Chondrocyte Implantation Versus Microfracture for the Treatment of Articular Cartilage Defects: A 5-Year Follow-up of a Prospective Randomized Trial

Background: Costal chondrocyte–derived pellet-type autologous chondrocyte implantation (CCP-ACI) has been introduced as a new therapeutic option for the treatment of articular cartilage defects. We had previously conducted a randomized controlled trial comparing CCP-ACI versus microfracture at 1 year postoperatively. Purpose: To compare the efficacy and safety of CCP-ACI versus microfracture for the treatment of articular cartilage defects of the knee at 5 years postoperatively. Study Design: Randomized controlled trial; Level of evidence, 2. Methods: This study describes the mean 5-year follow-up of a previously published prospective clinical trial. The previous prospective trial compared the results of CCP-ACI versus microfracture until 1 year of follow-up. Of the 30 patients who were included in the previous study, 25 were followed up for 5 years. Patients were evaluated based on clinical outcome scores (Lysholm score, International Knee Documentation Committee score, Knee injury and Osteoarthritis Outcome Score [KOOS], and visual analog scale for pain), magnetic resonance imaging findings, and rates of treatment failure at last follow-up. Results: The MOCART (Magnetic Resonance Observation of Cartilage Repair Tissue) score in the CCP-ACI group was significantly higher than that in the microfracture group at 5 years (62.3 vs 26.7, respectively; P < .0001). The Lysholm score and KOOS score in the CCP-ACI group were significantly higher than those in the microfracture group at 5 years (84.5 vs 64.9, respectively, and 390.9 vs 303.0, respectively; P = .023 and P = .017, respectively). There was 1 case of treatment failure that occurred in the microfracture group. Conclusion: The present randomized controlled trial indicated that the results of both procedures clinically and statistically significantly improved at 1 and 5 years’ follow-up in treating cartilage defects, but the results of CCP-ACI were superior to those of microfracture. Magnetic resonance imaging conducted at 1 year and 5 years after CCP-ACI revealed statistically significant superior structural integration with native cartilage tissue compared with microfracture. Registration: NCT03545269 (ClinicalTrials.gov)

KARTOGENIN-ENCAPSULATED COAXIAL PGS/PCL-ALIGNED NANOFIBRES FOR ARTICULAR CARTILAGE REGENERATION

Electrospinning is an advantageous technique for cartilage tissue engineering (CTE) applications due to its ability to produce nanofibers recapitulating the size and alignment of the collagen fibers present within the articular cartilage superficial zone. Moreover, coaxial electrospinning allows the fabrication of core-shell fibers able to encapsulate and release bioactive molecules in a sustained manner. Kartogenin (KTG) is a small heterocyclic molecule, which was demonstrated to promote the chondrogenic differentiation of human bone marrow-derived mesenchymal stem/stromal cells(hBMSCs)[1].In this work, we developed and evaluated the biological performance of core-shell poly(glycerol sebacate)(PGS)/poly(caprolactone)(PCL) aligned nanofibers (core:PGS/shell:PCL) mimicking the native articular cartilage extracellular matrix(ECM) and able to promote the sustained release of the chondroinductive drug KTG[2].The produced coaxial aligned PGS/PCL scaffolds were characterized in terms of their structure and fiber diameter, chemical composition, thermal properties, mechanical performance under tensile testing and in vitro degradation kinetics, in comparison to monoaxial PCL aligned fibers and respective non-aligned controls. KTG was incorporated into the core PGS solution to generate core-shell PGS-KTG/PCL nanofibers and its release kinetics was studied by HPLC analysis. KTG-loaded electrospun aligned scaffolds capacity to promote hBMSCs chondrogenic differentiation was evaluated by assessing cell proliferation, typical cartilage-ECM production (sulfated glycosaminiglycans(sGAG)) and chondrogenic marker genes expression in comparison to non-loaded controls. All the scaffolds fabricated showed average fiber diameters within the nanometer-scale and the core-shell structure of the fibers was clearly confirmed by TEM. The coaxial PGS-KTG/PCL nanofibers evidenced a more sustained drug release over 21 days. Remarkably, in the absence of the chondrogenic cytokine TGF-β3, KTG-loaded nanofibers promoted significantly the proliferation and chondrogenic differentiation of hBMSCs, as suggested by the increased cell numbers, higher sGAG amounts and up-regulation of the chondrogenic genes COL2A1, Sox9, ACAN and PRG4 expression. Overall, our results highlight the potential of core-shell PGS-KTG/PCL aligned nanofibers for the development of novel MSC-based CTE strategies.Acknowledgements: The authors thank FCT for funding through the project InSilico4OCReg (PTDC/EME-SIS/0838/2021) and to institutions iBB (UID/BIO/04565/2020) and Associate Laboratory I4HB (LA/P/0140/2020).

ENHANCING CARTILAGE TISSUE FORMATION IN GELMA/ALGINATE-TYRAMINE INTERPENETRATED NETWORKS (IPNS) WITH LOW INTENSITY PULSE ULTRASOUND STIMULATION (LIPUS)

In the native articular cartilage microenvironment, chondrocytes are constantly subjected to dynamic physical stimuli that maintains tissue homeostasis. They produce extra cellular matrix (ECM) components such as collagens (type II mainly, 50-75%), proteoglycans (10-30%) and other type of proteins1 . While collagen offers a large resistance in tension, proteoglycans are the responsible of the viscoelastic response under compression due to the negative charge they confer to the ECM allowing it to entrap a large amount of interstitial fluid. In pathologic states (e.g. osteoarthritis), this ECM is degenerated and the negative charge becomes unbalanced, losing the chondroprotective properties and resulting on an overloaded chondrocytes that further degenerate the matrix.Low-Intensity Pulsed Ultrasound Stimulation (LIPUS) has been used to generate acoustic (pressure) waves that create bubbles that collapse with cells, inducing a stimulus that can modulate cell response2. This mechanical stimulation promotes the expression of type II collagen, type X collagen, aggrecan and TGF-β, appearing as a great strategy to regenerate cartilage. However, current strategies make use of extrinsic forces to stimulate cartilage formation overlooking the physico-chemical properties of the degenerated cartilage, resulting in an excessive load-transfer to chondrocytes and the consequent hypertrophy and degeneration.Here, interpenetrated networks (IPNs) with different compositions were created using methacrylated gelatin (GelMA), to mimic the collagen, and alginate functionalized with tyramine (Alg-tyr) to mimic glycosaminoglycans and to introduce a negative charge in the model. Within the matrix chondrocytes where encapsulated and stimulated under different conditions to identify the ultrasound parameters that enhance tissue formation. Samples with and without stimulation were compared analysing the expression and deposition of collagen II, aggrecan, collagen X and TGF-β. The results suggested that the chondrogenic marker expression of the samples stimulated for 10 minutes per day for 28 days, was two times higher overall in all of the cases, which was correlated to the tissue formation detected.Acknowledgments: The authors would like to thank the Basque Government for the “Predoctoral Training Program for Non-Doctoral Research Staff 2021-2022” (Grant ref.: PRE_2021_1_0403). This work was supported by the RETOS grant PID2020-114901RA-I00 of the Ministry of Science and Innovation (MICINN).

MULTILAYER DUAL-POROSITY 3D-PRINTED SCAFFOLDS TO RECREATE THE ANISOTROPIC MICROENVIRONMENT OF THE CARTILAGE

Articular cartilage is a multi-zonal tissue that coats the epiphysis of long bones and avoids its wear during motion. An unusual friction could micro-fracture this connective membrane and progress into an osteochondral defect (OD), where the affected cartilage suffers inflammation, fibrillation, and forfeiture of its anisotropic structure.Clinical treatment for ODs has been focused on micro-fracture techniques, where the defect area is removed and small incisions are performed in the subchondral bone, which allows the exudation of mesenchymal stem cells (hMSCs) to the abraded zone. However, hMSCs represent less than 0.01% of the total cell population and are not able to self-organise coherently, so the treatments fail in the long term. To select, support and steer hMSCs from the bone marrow into a specific differentiation stage, and recreate the cartilage anisotropic microenvironment, multilayer dual-porosity 3D-printed scaffolds were developed.Dual-porosity scaffolds were printed using prepared inks, containing specific ratios of poly-(d,l)lactide-co-caprolactone copolymer and gelatine microspheres of different diameters, which acted as sacrificial micro-pore templates and were leached after printing. The cell adhesion capability was investigated showing an increased cell number in dual-porosity scaffolds as compared to non-porous ones. To mimic the stiffness of the three cartilage zones, several patterns were designed, printed, and checked by dynamic-mechanical analysis under compression at 37 ºC. Three patterns with specific formulations were chosen as candidates to recreate the mechanical properties of the cartilage layers. Differentiation studies in the selected scaffolds showed the formation of mature cartilage by gene expression, protein deposition and biomolecular analysis. Given the obtained results, designed scaffolds were able to guide hMSC behaviour.In conclusion, biocompatible, multilayer and dual-porosity scaffolds with cell entrapment capability were manufactured. These anisotropic scaffolds were able to recreate the physical microenvironment of the natural cartilage, which in turn stimulated cell differentiation and the formation of mature cartilage.Acknowledgments: This work was supported by the EMAKIKER grant.