Narrow Width Research Articles

Precise Regulation of the Reverse Intersystem Crossing Pathway by Hybridized Long-Short Axis Strategy for High-Performance Multi-Resonance TADF Emitters.

Multi-resonance thermally activated delayed fluorescence (MR-TADF) molecules have experienced great success in organic light-emitting diodes (OLEDs) owing to their outstanding quantum efficiencies and narrow full width at half-maximums (FWHMs). However, the reverse intersystem crossing (RISC) rates of MR-TADF emitters are usually small, which will lead to relatively long triplet exciton lifetime and severe efficiency roll-off. Here, we report an effective molecular design strategy to introduce multichannel RISC pathways and thus increase RISC rates without compromising the color fidelity and emission efficiency by the "hybridized long-short axis (HLSA)" strategy. The TPA-CN-BN shows a near-unity photoluminescence quantum yield, rapid RISC rate of 1.4 × 105 s-1, narrow FWHM of 23 nm, and small singlet-triplet energy gap (ΔEST) of 0.06 eV in solution. The non-sensitized OLED based on TPA-CN-BN exhibits a narrowband emission with the FWHM of 31 nm, in company with external quantum efficiency (EQE) of 37.9%. Notably, the device exhibits the low efficiency roll-off as the EQEs maintain 34.8% and 21.8% at 100 and 1000 cd m-2, respectively, representing the best performance for single-host OLEDs based on the BCzBN skeleton. This study provides a fresh and promising approach to realize high-performance OLEDs with high color purity and remarkable device efficiency.

Precise Regulation of the Reverse Intersystem Crossing Pathway by Hybridized Long‐Short Axis Strategy for High‐Performance Multi‐Resonance TADF Emitters

Multi‐resonance thermally activated delayed fluorescence (MR‐TADF) molecules have experienced great success in organic light‐emitting diodes (OLEDs) owing to their outstanding quantum efficiencies and narrow full width at half‐maximums (FWHMs). However, the reverse intersystem crossing (RISC) rates of MR‐TADF emitters are usually small, which will lead to relatively long triplet exciton lifetime and severe efficiency roll‐off. Here, we report an effective molecular design strategy to introduce multichannel RISC pathways and thus increase RISC rates without compromising the color fidelity and emission efficiency by the “hybridized long‐short axis (HLSA)” strategy. The TPA‐CN‐BN shows a near‐unity photoluminescence quantum yield, rapid RISC rate of 1.4 × 105 s‐1, narrow FWHM of 23 nm, and small singlet‐triplet energy gap (ΔEST) of 0.06 eV in solution. The non‐sensitized OLED based on TPA‐CN‐BN exhibits a narrowband emission with the FWHM of 31 nm, in company with external quantum efficiency (EQE) of 37.9%. Notably, the device exhibits the low efficiency roll‐off as the EQEs maintain 34.8% and 21.8% at 100 and 1000 cd m‐2, respectively, representing the best performance for single‐host OLEDs based on the BCzBN skeleton. This study provides a fresh and promising approach to realize high‐performance OLEDs with high color purity and remarkable device efficiency.

Research on wire electrochemical micromachining with a unidirectional traveling wire and horizontal electrolyte flushing

Wire electrochemical micromachining (WECMM) technology is well-suited for the processing of small parts, offering advantages such as high machining accuracy and the absence of a recast layer on the machined surface. However, the narrow width of the slit in WECMM makes the removal of electrolytic products a challenging process, which in turn results in a reduction in processing efficiency. To address this challenge, this paper proposes WECMM with a unidirectional traveling wire and horizontal electrolyte flushing. This approach aims to enhance the mass transfer efficiency of WECMM through the use of a unidirectional traveling wire, thereby optimizing the processing efficiency of WECMM. The experiment was conducted on 510 µm thick 9Cr18Mo stainless steel using 15 µm tungsten wire as the cathode. The experimental results demonstrate that the maximum feed rate (MFR) of a unidirectional traveling wire WECMM can reach 3.6 µm/s, thereby achieving comprehensive improvement in processing performance. Ultimately, two kinds of intricate microstructures based on four-layer workpieces were fabricated, resulting in a surface roughness Ra of only 0.052 µm.

Carbon Dots and Their Films with Narrow Full Width at Half Maximum Orange Emission.

To obtain carbon dots (CDs) with narrow full width at half maximum (FWHM) and long-wavelength emission, carbon sources with high conjugate sizes and abundant functional groups can be employed to synthesize CDs. In this study, orange-emissive carbon dots (OCDs) were synthesized with phloroglucinol and rhodamine B as precursors. When the molar ratio of them was 30:1, and ethanol was served as the solvent, OCDs with optimized emission wavelength at approximately 580 nm, an FWHM of 30 nm, and a quantum yield (QY) of 27.31% were obtained. Subsequently, the OCDs were incorporated into polyvinyl alcohol (PVA) to fabricate solid-state OCD/PVA fluorescent films, which exhibited an FWHM of 47 nm. The PVA matrix facilitated the dispersion of OCDs, thereby suppressing non-radiative energy transfer among the OCDs and enhancing luminescence efficiency. Consequently, compared with OCDs, the OCD/PVA film exhibited significant luminescent enhancement, and the QY of the composite film was increased to 84.74%. Moreover, OCD/PVA film showed good transmittance and thermal stability. This research offers a solid theoretical and experimental foundation for the potential applications of CDs in the field of solid-state lighting.

Fracture length data for geothermal applications

Fracture lengths govern permeability and are unknowns in geothermal assessment. Along their lengths, fracture widths vary due to growth by linkage. Under the influence of diagenesis, narrow widths seal, breaking porosity continuity and reducing open length. The largest range of widths and thus susceptibility to fill occurs where fractures are linked by narrow segments. Outcrops of a geothermal target, Cambrian Potsdam quartz arenite, contain opening-mode fractures having lengths spanning five orders of magnitude from 0.082 mm to 17.9 m. Combined lengths measured at a range of scales can be described by power laws, but at a given image resolution, lengths are best fit by exponential functions. Owing to preferential sealing of small fractures, open fractures follow exponential functions, but values depend on rules for designating fractures as continuous. En échelon segments, offset 10 mm, are connected by narrow fractures or microfractures (hard linked) not evident on outcrop 1-m-elevation LiDAR or 30-m-height drone images. A rule that identifies where narrow but probably connected segments yields lengths that are meaningful for flow simulation. Depending on diagenesis, continuity rules can halve or double average and maximum length values. Length values from outcrop for geothermal applications should be adjusted based on wellsite-specific diagenesis information.

Insight into Structure, Regulatable Photoluminescence of Stably Self and Codoped Phosphor Ba3Y2B6O15: Dy/Eu for nUV wLEDs

AbstractThe exploitation of borate‐based phosphors is garnered tremendous attention in wLEDs. Although previous research provided some insights into borates from the viewpoints of synthesis, structure, and defect evolutions, their photoluminescence (PL) with dopants is still insufficient for actual application, especially on aspects of efficiency/stability. Herein, to alleviate the above issues, a new type of lesser‐known high symmetry Ba3Y2B6O15 (BYB) codoped with Dy3+/Eu3+ phosphors are synthesized via multistep solid‐state reaction and possessed controllable PL based on nUV excitation, defect‐induced (self‐) PL, and energy transfer (ET) from Dy3+ to Eu3+. The origin of blue self‐PL is clarified based on oxygen‐related defects and optimized via adjusting synthetic atmosphere (air/Ar) and (co)doping dopants to control the defect content. Thanks to dense connectivity, and highly symmetric structure with perfectly ordered octahedral sites of Y3+ for accommodation of Dy/Eu and ET, “cool” white and red PL from Dy3+ and Eu3+, respectively, show high PL efficiency with narrow full width at half the maximum (fwhm). The phosphor also exhibits excellent thermal stability because of high bandgap and low electron‐phonon coupling. Finally, a high‐quality phosphor‐converted wLED (pc‐wLED) device is assembled via remote “capping” packaging by adopting the BYB: Dy/Eu and a 350 nm nUV LED chip.

Improving piezoelectric performance in PMN-0.26 PT single crystal via low frequency AC poling

In this experiment, the alternating current poling (ACP) was applied to the 0.74 Pb(Mg1/3Nb2/3)O3-0.26PbTiO3 (PMN-0.26 PT) single crystal to explore the impact of low frequency (0.1 Hz) ACP on electrical performance. When the poling condition is loading 5 cycles at 14 kV/cm, high piezoelectric coefficient d33 of 1780 pC/N and giant dielectric constant of 5881 are obtained for the ACP treatment sample, enhanced 42.4 % and 14.3 % by contrast with the conventional direct current poling (DCP), respectively. The values of coercive field, maximum strain, and converse piezoelectric constant d33∗ vary considerably around the ferroelectric phase transition detected by polarization-electric field, as well as bipolar and unipolar electric field-induced strain hysteresis loops. In addition, the domain configuration of the ACP sample presents a more periodic stripe-like structure with narrower width and relatively more uniformity after three months aging as compared with the DCP sample, showing the importance of domain engineering in enhancing electrical performance of ferroelectric single crystals.

Enhanced Fluorescence in Green ZnSeTe Quantum Dots Using Gradient Layer Technique

AbstractA novel method is presented for synthesizing green ZnSeTe quantum dots (QDs) that demonstrate high photoluminescence quantum yield (PLQY) and a narrow full width at half maximum (FWHM). In this synthesis, a gradient layer is created between the ZnSeTe core and the ZnSe inner shell by utilizing the different reactivities of precursors. This innovative approach aims to reduce lattice mismatch and minimize interfacial defects, thereby enhancing the fluorescence properties of ZnSeTe QDs. Using the gradient layer, green QDs are achieved with a FWHM of 36 nm and a PLQY of 90%, surpassing previous results. Detailed structural analyses confirmed a reduction in stacking faults and strain in the QDs with a gradient layer, leading to enhanced fluorescence properties. The QDs with a gradient layer are successfully integrated into the emissive layer of a quantum dot light–emitting diode device, demonstrating superior performance compared to QDs without the gradient layer.

Probability of lateral instability while walking on winding paths

People with balance impairments often struggle performing turns or lateral maneuvers, which can increase risk of falls and injuries. Here we asked how people’s mediolateral balance is impacted when walking on non-straight winding paths. Twenty-four healthy adults (12F / 12M; 25.8±3.5 yrs) participated. Each walked on each of six paths projected onto a treadmill, comprised of three pseudo-random path oscillation frequency combinations (straight, slowly-winding, quickly-winding), each presented at either wide or narrow width. We quantified stepping errors as the percent of steps taken off each path. We quantified minimum mediolateral Margin of Stability (MoSL) at each step and calculated means (μ) and standard deviations (σ) for each trial. We calculated lateral Probability of Instability (PoIL) as participants’ statistical risk of taking unstable (MoSL < 0) steps. On narrower paths, participants made more stepping errors and walked with smaller μ(MoSL) for all path frequencies (p < 0.001), and exhibited increased PoIL on the straight and slowly-winding paths (p < 0.001). On winding paths, participants made progressively more stepping errors and walked with smaller μ(MoSL) as oscillation frequency increased on narrow paths (all p < 0.001) and on the wide quickly-winding paths (all p < 0.001). They also consistently walked with larger σ(MoSL), and increased PoILon higher sinuosity paths of both widths (all p < 0.001). Though many took numerous unstable steps, no participant fell. Our results demonstrate healthy adults’ ability both to trade off increased risk of lateral instability for greater maneuverability, and to employ highly-versatile stepping strategies to maintain balance while walking.

Application of vertical seismic profile multi-component data to tight sandstone gas reservoirs

Abstract Given the complex geological characteristics of the tight gas sandstone in the Shaximiao Formation of the Jurassic in the central Sichuan Basin, including its wide distribution, narrow width, and thin thickness, conventional surface seismic methods face significant challenges in reservoir delineation. To address this challenge, a vertical seismic profile (VSP) survey was conducted in the region in 2022, along with the simultaneous collection of 3D3C surface seismic data. This article mainly elaborates on a case study of using multi-component VSP technology to delineate tight sandstone gas reservoirs. By comparing the processed VSP imaging volume with the surface seismic imaging volume, it was discovered that the frequency width of the VSP image was 8 to 12 Hz higher than that of the surface seismic image. Utilizing the multi-component information in VSP data, it is feasible to more precisely delineate tight gas sandstones, thereby reducing the uncertainty of data interpretation. Based on the conventional data interpretation of these images, an innovative application suggests using the centroid frequency ratio of PSv to PP waves as an indicator for tight sandstone. The results show that this attribute has high sensitivity to this type of reservoir. Combining geological, drilling, and logging data, an interpretation template was established based on VSP data to interpret 3D3C surface seismic data and propose new drilling well locations. The conclusion is that the successful application of VSP technology cannot be achieved without the integration of multiple disciplines. The combined exploration technology of multi-component VSP and 3D3C surface seismic has been demonstrated to have high application value through practical application, significantly improving the success rate of gas wells and providing effective support for the exploration and development of tight sandstone gas reservoirs.

Midface Skeletal Sexual Dimorphism: Lessons Learned from Advanced Three-dimensional Imaging in the White Population.

Facial shape is significantly influenced by the underlying facial bony skeleton. Sexual dimorphisms in these structures are crucial for craniofacial, aesthetic, and gender-affirming surgery. Previous studies have examined the orbits and upper face, but less is known about the midface. This study aimed to elucidate the sexual dimorphism in the midface region, focusing on the maxilla and zygomatic bones. A retrospective review was conducted using facial computed tomography scans from 101 White patients aged 20-79 years, using Materialise Mimics and 3-Matics for segmentation and 3D reconstruction. Measurements and statistical shape modeling of the midfacial skeleton were performed. Our results show a distinct sexual dimorphism in the midfacial skeletal structure across all age groups. Women typically had a narrower bizygomatic width by 1.5 mm (P = 0.04), a shallower maxillary depth by 1.6 mm (P < 0.01), and a midfacial vertical height that was 4 mm shorter than that of men (P = 0.018). In contrast, men exhibited a greater distance between the frontozygomatic sutures by 5.4 mm (P < 0.01), a 3-mm greater interorbitale distance (P < 0.01), and a 2.1-mm wider infraorbital foramina distance (P = 0.007). There were no significant differences in the pyriform and maxillary angles (P = 0.15 and P = 0.52, respectively). Our analysis of midfacial skeletal anatomy revealed sexual dimorphism differences. Men exhibited more pronounced facial features than women, with a broader horizontal midfacial skeleton, a longer midfacial vertical height, and greater maxillary depths compared with women.

Defect passivation with spectral shift for improved efficiency and stability of quasi-2D blue perovskite light emitting diodes

Metal halide perovskites are emerging as promising materials for next-generation light-emitting diodes (LEDs), owing to their cost-effectiveness, facile manufacturing, and excellent optoelectronic properties including a narrow emission-line full width at half maximum, high photoluminescence quantum yield, and spectral stability. However, blue-emission perovskite LEDs (PeLEDs) exhibit perovskite phase segregation and halogen ion migration during operation, attributed to crystal defects, halogen vacancies, and phase instability of mixed-halide perovskites. These defects compromise the spectral stability of blue-emitting PeLEDs, resulting in an undesirable color shift toward longer wavelengths. In this study, we introduce a dynamic treatment with phenylphosphonic dichloride (PPOCl2) to address these challenges and achieve blue-emitting PeLEDs. The chloride in PPOCl2 penetrates the quasi-2D sky-blue perovskite, reducing halide defects. Meanwhile, the phosphonic group forms covalent bonds with undercoordinated Pb on the perovskites, effectively passivating defects. PPOCl2-treated perovskite exhibits a spectral blue shift toward a deep-blue wavelength (≤467 nm), enhancing electroluminescence performance. The quasi-2D PPOCl2-treated PeLEDs achieve a maximum external quantum efficiency of 2.31 % with an emission peak at 488 nm. Dynamic treatment with PPOCl2 shows the potential to improve the performance and stability of blue emission perovskite-based LEDs, providing a spectral shift mechanism to achieve deep-blue emission in PeLEDs.

Experimental observations of bifurcated power decay lengths in the near Scrape-Off Layer of ST40 High Field Spherical Tokamak

The scrape-off layer parallel heat flux decay lengths measured at ST40, a high field, low aspect ratio spherical tokamak, have been observed to bifurcate into two groups. The wide group follows established H-mode scalings (ranging between 2 to 8 mm) while the narrow group falls up to 10 times below these scalings (between 0.2 and 0.8 mm), being comparable to the ion total Larmor radius rather than the ion poloidal Larmor radius. The heat flux profiles of the latter group can only be described by a multi-exponential function, rather than the single exponential function convoluted with a Gaussian. The onset of the narrow scrape-off layer width is observed to be associated with suppressed magnetic fluctuations, suggesting reduced electromagnetic turbulence levels in the SOL.

InP-based strain engineered InAs(Sb)/InAsPSb multiple quantum wells with tunable emission and high internal quantum efficiency enabled by Sb incorporation

A type I InAs(Sb)/InAsPSb strain engineered multiple quantum wells light emitting diodes system has been demonstrated. Tensile InAsPSb quantum barriers with a high degree of band offset (∆EC = 116–123 meV, ∆EV = 193–250 meV) were used to compensate for the high compressive strain of the InAs(Sb) quantum wells. The structure was grown on the n+-InAsxP1−x metamorphic buffer with a high degree of relaxation (98%), low surface roughness (0.69 nm), and low dislocation density. Through careful strain engineering design, the compressive strain of InAs(Sb) reaches 0.57%–1.52% without strain relaxation. The incorporation of Sb into the multiple quantum wells not only reduces the bandgap but also improves the interface quality by acting as an effective surfactant. Structural analysis reveals superior quality in InAsSb/InAsPSb multiple quantum wells compared to InAs/InAsPSb multiple quantum wells, demonstrating significantly reduced interface roughness and suppression of the Stranski–Krastanov growth mode. Room temperature electroluminescence measurements show a tunable emission wavelength ranging from 2.7 to 3.3 μm, accompanied by a narrow full width at half maximum value of 45 meV. Photoluminescence analysis indicates that the internal quantum efficiency of InAsSb/InAsPSb multiple quantum wells is 5.5%, which is 7 times higher than that of InAs/InAsPSb.

Synergistic effect induces self crystallization of CsPbBr3 quantum dots in Borosilicate glass matrix By LiF

Cesium lead halide perovskite (CsPbX3) quantum dots (QDs) are recognized as viable substitutes for conventional fluorescent powder color converters, which can improve the color gamut and reproducibility of liquid crystal displays (LCDs). Encapsulating QDs in glass can effectively solve the water oxygen stability of QDs, but the glass matrix impedes the nucleation of QDs and the precipitation of QDs requires secondary heating. In our research, we successfully accomplished the self-crystallization of CsPbBr3 QDs facilitated by LiF within a B2O3-SiO2-ZnO borosilicate glass matrix.The results indicate that the self crystallization of CsPbBr3 QDs induced by LiF in borosilicate glass matrix has a synergistic effect. The Li+ ions can break the glass network structure and facilitate ionic migration and transport, while F- ions have good electronegativity due to ion aggregation, and can strongly attract Cs+ and Pb2+ ions with larger atomic radii, thereby promoting the rapid nucleation and growth of CsPbBr3 QDs, ultimately synthesizing QDs with uniform particle size, narrow half peak width, good optical properties, and thermal stability.

Greater squat stance width alters three-dimensional hip moment demands

Barbell squat exercise may be performed with different stance widths, which will influence lower limb kinematics and joint reaction forces. Consequently, three-dimensional hip moments may vary with stance width, influencing muscle loading, and the muscles trained when performing squat exercise. To examine how squat stance width affects hip moments, males (n = 11) and females (n = 13) performed barbell squats at narrow, medium, and wide stance widths. Motion capture and force platform data were used to calculate three-dimensional hip net joint moments (NJM) as indicators of the muscular moments required. Hip extensor NJM was greater for wide than medium (P < 0.001) and narrow (P < 0.001) stance squats. Hip adductor NJM was not different between squat stance widths (P = 0.414). Hip lateral rotator NJM was greater in medium versus narrow squats (P < 0.001), and in wide versus medium (P < 0.001) and narrow (P < 0.001) squats. Taken together, the rotational demands at the hip increase as stance width increases, due to higher hip extensor and lateral rotator NJM. In contrast hip adductor NJM is invariant. These data provide insight into the three-dimensional requirements that muscles must meet at the hip when squat exercise is performed at different stance widths.

Welding Characteristics of Medium Titanium Plates with Autogenous Laser Welding and Narrow-Gap Laser Filling Welding Modes.

Titanium and titanium alloys with a medium thickness of 5 to 12 mm are widely used for ocean platforms, military equipment and in other fields because of their light weight, appropriate strength and corrosion resistance. In this study, autogenous laser welding and narrow-gap laser welding processes were researched and compared, and the welding characteristics, weld microstructure and joint strength were analyzed. The results showed that autogenous laser welding had higher efficiency, narrower weld width and higher microstructure uniformity. Autogenous laser welding can achieve the single pass weld penetration at laser keyhole mode. The weld width of narrow-gap laser welded joint was 12.5 mm, which was nearly three times than that of autogenous laser welding. The grain size of autogenous laser welding was obviously smaller and more uniform in depth than that of narrow-gap laser welding. In the weld zone, the coarse columnar α grains grew from the fusion line, while in the heat-affected zone, equiaxed α grains with needle and sawtooth α morphologies were presented. The microhardness of the heat-affected zone was higher than in the weld zone and the base metal due to the denser needle microstructure. The tensile samples all fractured at the base metal, indicating the welded joint strength efficiency was greater than 1.

Laser applications in arts and culture: An example on the construction of tiered umbrellas

Tiered umbrella or in Thai called Chat means a high decoration or decoration of honor, a type of umbrella that is stacked up in layers along a single axis. At present, in Thailand, the tiered umbrellas are seen in three important places including (1) on the top of the pagoda of various temples, (2) inside the ordination hall of temples, and (3) inside the Grand Palace for the king and the royal family. In the past, a tiered umbrella was made from brass because its color was similar to gold. Constructing each set of tiered umbrellas requires a skilled technician and takes a lot of time. At present, laser cutting of metals has been widely used in the production section of the industry. This is due to the advantages of laser cutting that include narrow kerf width, smooth cutting edges, high cutting speed, reduced material waste, no tool wear, and easy automation and manipulation even for complex shapes. In this work, an example for the construction of seven-tiered umbrellas from stainless steel sheets using a high-power CO2 laser was reported. The results show that the total working time for the construction of a seven-tiered umbrella is about 113 h, which is much less time compared to 3–6 months taken by craftsmen. Therefore, this method can preserve the construction of tiered umbrellas in Thailand even though craftsmen are scarce at present.

Ions-induced Assembly of Perovskite Nanocomposites for Highly Efficient Light-Emitting Diodes with EQE Exceeding 30.

Metal halide perovskites, a cost-effective class of semiconductos, hold great promise for display technologies that demand high-efficiency, color-pure light-emitting diodes (LEDs). Early research on three-dimensional (3D) perovskites showed low radiative efficiencies due to modest exciton binding energies. To inprove luminescence, reducing dimensionality or grain size has been a common approach. However, dividing the perovskite lattice into smaller units may hinder carrier transport, compromising electrical performance. Moreover, the increased surface area introduce additional surface trap states, leading to greater non-radiative recombination. Here, an ions-induced growth method is employed to assembe lattice-anchored perovskite nanocomposites for efficient LEDs with high color purity. This approach enables the nanocomposite thin films, composed of 3D CsPbBr3 and its variant of zero-dimensional (0D) Cs4PbBr6, to feature significant low trap-assisted nonradiative recombination, enhanced light out-coupling with a corrugated surface, and well-balanced charge carrier transport. Based on the resultant 3D/0D perovskite nanocomposites, the perovskite LEDs (PeLEDs) achieving an remarkable external quantum efficiency of 31.0% at the emission peak of 521 nm with a narrow full width at half-maximum of only 18 nm. This sets a new benchmark for color purity in high performance PeLED research, highlighting the significant advantage of this approach.

Full-scale field test of early-age behaviour of partially continuous reinforced concrete pavement

To address the damage characteristics and deficiencies of the existing continuously reinforced concrete pavement (CRCP), which are the high construction cost and irregular crack distribution patterns, a concrete pavement structure called partially continuous reinforced concrete pavement (PCRCP) is proposed. In this paper, the early-age (28 days, without traffic) behaviour of PCRCP subjected to environmental loading is investigated. To this end, full-scale field tests were carried out in Xiangjiagou Tunnel, Shanxi Province, China. Testing results showed that the PCRCP test section with the partial continuous reinforcement length of 100 cm and active crack spacing of 5 m can provide better early-age performance and lower initial construction cost in this study. The PCRCP test section with the active crack control method has a uniform crack distribution pattern with narrow width compared to the CRCP test section. The results of this study would provide data support and reference for the rational design of PCRCP.