Nanocomposite Scaffolds Research Articles

The role of three-dimensional scaffolds based on polyglycerol sebacate/ polycaprolactone/ gelatin in the presence of Nanohydroxyapatite in promoting chondrogenic differentiation of human adipose-derived mesenchymal stem cells

BackgroundTissue engineering for cartilage regeneration has made great advances in recent years, although there are still challenges to overcome. This study aimed to evaluate the chondrogenic differentiation of human adipose-derived mesenchymal stem cells (hADSCs) on three-dimensional scaffolds based on polyglycerol sebacate (PGS) / polycaprolactone (PCL) / gelatin(Gel) in the presence of Nanohydroxyapatite (nHA).Materials and methodsIn this study, a series of nHA-nanocomposite scaffolds were fabricated using 100:0:0, 60:40:0, and 60:20:20 weight ratios of PGS to PCL: Gel copolymers through salt leaching method. The morphology and porosity of prepared samples was characterized by SEM and EDX mapping analysis. Also, the dynamic contact angle and PBS adsorption tests are used to identify the effect of copolymerization and nanoparticles on scaffolds' hydrophilicity. The hydrolytic degradation properties were also analyzed. Furthermore, cell viability and proliferation as well as cell adhesion are evaluated to find out the biocompatibility. To determine the potential ability of nHA-nanocomposite scaffolds in chondrogenic differentiation, RT-PCR assay was performed to monitor the expression of collagen II, aggrecan, and Sox9 genes as markers of cartilage differentiation.ResultsThe nanocomposites had an elastic modulus within a range of 0.71–1.30 MPa and 0.65–0.43 MPa, in dry and wet states, respectively. The PGS/PCL sample showed a water contact angle of 72.44 ± 2.2°, while the hydrophilicity significantly improved by adding HA nanoparticles. It was found from the hydrolytic degradation study that HA incorporation can accelerate the degradation rate compared with PGS and PGS/PCL samples. Furthermore, the in vitro biocompatibility tests showed significant cell attachment, proliferation, and viability of adipose-derived mesenchymal stem cells (ADMSCs). RT-PCR also indicated a significant increase in collagen II, aggrecan and Sox9 mRNA levels.ConclusionsOur findings demonstrated that these nanocomposite scaffolds promote the differentiation of hADSCs into chondrocytes possibly by the increase in mRNA levels of collagen II, aggrecan, and Sox9 as markers of chondrogenic differentiation. In conclusion, the addition of PCL, Gelatin, and HA into PGS is a practical approach to adjust the general features of PGS to prepare a promising scaffold for cartilage tissue engineering.Graphical

A 3D printed polylactic acid-Baghdadite nanocomposite scaffold coated with microporous chitosan-VEGF for bone regeneration applications

Three-dimensional (3D) printing technology has become an advanced approach for fabricating patient-specific scaffolds with complex geometric shapes to replace damaged or diseased tissue. Herein, polylactic acid (PLA)-Baghdadite (Bgh) scaffold were made through the fused deposition modeling (FDM) 3D printing method and subjected to alkaline treatment. Following fabrication, the scaffolds were coated with either chitosan (Cs)-vascular endothelial growth factor (VEGF) or lyophilized Cs-VEGF known as PLA-Bgh/Cs-VEGF and PLA-Bgh/L.(Cs-VEGF), respectively. Based on the results, it was found that the coated scaffolds had higher porosity, compressive strength and elastic modulus than PLA and PLA-Bgh samples. Also, the osteogenic differentiation potential of scaffolds following culture with rat bone marrow-derived mesenchymal stem cells (rMSCs) was evaluated through crystal violet and Alizarin-red staining, alkaline phosphatase (ALP) activity and calcium content assays, osteocalcin measurements, and gene expression analysis. The release of VEGF from the coated scaffolds was assessed and also the angiogenic potential of scaffolds was evaluated. The sum of results presented in the current study strongly suggests that the PLA-Bgh/L.(Cs-VEGF) scaffold can be a proper candidate for bone healing applications.

Cytotoxicity Effects of Polyhydroxybutyrate/Chitosan/Bioglass Nanocomposite Scaffolds on Human Osteoblast-like Cells (SAOS-2 Cells)

Introduction: In tissue engineering, a porous material is applied as the extracellular matrix or scaffold for cell growth. Then growth factors are added to this scaffold whose cytotoxicity must be assessed. In this study, the cytotoxicity effects of polyhydroxybutyrate/chitosan/bioglass nanocomposite scaffolds on human osteoblast like cells (SAOS-2 cells) are explored.Materials & Methods: This study was experimental and was done in Isfahan Dental School. The polyhydroxybutyrate/chitosan/bioglass nanocomposite scaffold was fabricated using the electrospinning method. Scanning Electron Microscopy (SEM) analysis was used to evaluate the morphological characteristics of the nanofibers and their diameter distribution. Additionally, bioglass nanoparticles in the fibers were identified via SEM. The MTT assay was performed to assess cell viability after 3, 5, and 7 days. The collected data were analyzed using SPSS 20.0 through statistical tests including Kruskal-Wallis test (p value ≤ 0.05).Results: According to SEM images, the scaffold fibers were fully porous and no beads were observed. Furthermore, the polyhydroxybutyrate/chitosan/bioglass scaffold showed greater cell viability and proliferation compared to the groups lacking bioglass.Conclusion: The polyhydroxybutyrate/chitosan/bioglass scaffold has no cytotoxic effect on osteoblast– like cells.

Three-Dimensional Printing of a Polycaprolactone-Fluorapatite Nanocomposite Scaffold and Simulation of Its Mechanical Properties

Introduction: The use of porous nanobiocomposite scaffolds for maxillofacial fractures and internal surface optimization of artificial grafts utilizing nanotechnology can improve cell adhesion, mechanical properties, and adsorption rate. Porous scaffolds have been the subject of numerous investigations, especially for broken and damaged parts of the facial bone. The goal of this study was to look into the biological, experimental, and numerical study of the mechanical properties of porous scaffolds under static loading conditions.Materials & Methods: In this study, a bone scaffold of polycaprolactone- Fluorapatite (PCL / nFA) nanocomposite materials containing (0, 10, 20, 30 %wt.) Fluorapatite nanoparticles was designed and manufactured using a 3D printer with Fused Deposition Modelling (FDM) process. The scaffolds were designed in SolidWorks software with 70% porosity and then transferred to Abaqus software for simulation.Results: In addition, following 28 days of immersion in the simulated body fluid, the bioactivity test of pure and composite scaffolds showed that the PCL /20nFA composite sample produced the most apatite on the surface. DAPI staining and fluorescent microscopy observation, confirm cell viability on the 3D printed scaffold.Conclusion: The Von Mises stress and compressive test simulations revealed that the porous scaffold model may be used for maxillofacial bone replacement and has good mechanical strength and stability.

Acoustic Force Elastography Microscopy.

Hydrogel scaffolds have attracted attention to develop cellular therapy and tissue engineering platforms for regenerative medicine applications. Among factors, local mechanical properties of scaffolds drive the functionalities of cell niche. Dynamic mechanical analysis (DMA), the standard method to characterize mechanical properties of hydrogels, restricts development in tissue engineering because the measurement provides a single elasticity value for the sample, requires direct contact, and represents a destructive evaluation preventing longitudinal studies on the same sample. We propose a novel technique, acoustic force elastography microscopy (AFEM), to evaluate elastic properties of tissue engineering scaffolds. AFEM can resolve localized and two-dimensional (2D) elastic properties of both transparent and opaque materials with advantages of being non-contact and non-destructive. Gelatin hydrogels, neat synthetic oligo[poly(ethylene glycol)fumarate] (OPF) scaffolds, OPF hydroxyapatite nanocomposite scaffolds and ex vivo biological tissue were examined with AFEM to evaluate the elastic modulus. These measurements of Young's modulus range from approximately 2 kPa to over 100 kPa were evaluated and are in good agreement with finite element simulations, surface wave measurements, and DMA tests. The AFEM can resolve localized and 2D elastic properties of hydrogels, scaffolds and thin biological tissues. These materials can either be transparent or non-transparent and their evaluation can be done in a non-contact and non-destructive manner, thereby facilitating longitudinal evaluation. AFEM is a promising technique to quantify elastic properties of scaffolds for tissue engineering and will be applied to provide new insights for exploring elastic changes of cell-laden scaffolds for tissue engineering and material science.

Carboxymethyl chitosan/gelatin/hydroxyapatite biomimetic cryogels for bone regeneration

Gelation at a temperature below the freezing point of a solvent is known as cryogelation, which has attracted attention in regenerative medicine due to its improved mechanical and structural properties. This study focuses on using cryogelation as a versatile method for fabricating biomimetic scaffolds with improved mechanical strength and larger pore sizes with potential for bone tissue engineering applications. Scaffolds comprising carboxymethyl chitosan/gelatin/nano-hydroxyapatite were formed through cryogelation. The effects of three parameters – namely, cross-linker concentration, mineral content and gelatin-to-polymer ratio – on physical, chemical and mechanical properties were investigated. In this work, MG63 cells were used for an in vitro assay. In addition, an in vivo assay was conducted to investigate the biocompatibility of the nanocomposite scaffolds. The results showed that all scaffolds have a porous structure with interconnected pores with a morphology similar to bone structure. Their pore size, porosity and swelling ratio decreased with an increased cross-linker concentration, while nano-hydroxyapatite had the opposite effect. X-ray diffraction results also showed that the inorganic phase retained its crystallinity in the substrate with a slight decrease in crystal size. In addition, the scaffolds showed no toxicity in either in vitro or in vivo studies. The obtained results showed that biomimetic cryogels based on carboxymethyl chitosan/gelatin/hydroxyapatite have potential for bone tissue engineering.

Cerium oxide nanoparticles disseminated chitosan gelatin scaffold for bone tissue engineering applications

Cell-free and cell-loaded constructs are used to bridge the critical-sized bone defect. Oxidative stress at the site of the bone defects is a major interference that slows bone healing. Recently, there has been an increase in interest in enhancing the properties of three-dimensional scaffolds with free radical scavenging materials. Cerium oxide nanoparticles (CNPs) can scavenge free radicals due to their redox-modulating property. In this study, freeze-drying was used to fabricate CG-CNPs nanocomposite scaffolds using gelatin (G), chitosan (C), and cerium oxide nanoparticles. Physico-chemical, mechanical, and biological characterization of CG-CNPs scaffolds were studied. CG-CNPs scaffolds demonstrated better results in terms of physicochemical, mechanical, and biological properties as compared to CG-scaffold. CG-CNPs scaffolds were cyto-friendly to MC3T3-E1 cells studied by performing in-vitro and in-ovo studies. The scaffold's antimicrobial study revealed high inhibition zones against Gram-positive and Gram-negative bacteria. With 79 % porosity, 45.99 % weight loss, 178.25 kPa compressive modulus, and 1.83 Ca/P ratio, the CG-CNP2 scaffold displays the best characteristics. As a result, the CG-CNP2 scaffolds are highly biocompatible and could be applied to repair bone defects.

Magnesium-zinc-graphene oxide nanocomposite scaffolds for bone tissue engineering

The aim of this study was to fabricate and evaluate magnesium-zinc-graphene oxide nanocomposite scaffolds for bone tissue engineering. For this reason, Mg-6Zn, Mg-6Zn-1GO, and Mg-6Zn-2GO scaffolds were fabricated by the powder metallurgy method. The porosity level and also the pore size of the scaffolds were evaluated by SEM which varied from 40 to 46% and 200 to 500 μm, respectively. The chemical composition and microstructure of the scaffolds were characterized by XRD and SEM equipped with EDS; the presence of Mg, Zn, C, and O elements in the structure of the scaffolds was shown. Also, the elemental map confirmed the existence of magnesium, zinc, carbon, and oxygen in the structure of the scaffold. The mechanical properties of the scaffolds were investigated by the compression test; the results showed that by the addition of graphene oxide to the structure, the compressive strength of the samples increased from 5 to 8 MPa. Electrochemical corrosion polarization tests were conducted to evaluate the corrosion resistance of the samples immersed in simulated body fluid (SBF). Furthermore, the biodegradability of the scaffolds was determined by immersion of the samples in phosphate-buffered saline (PBS). The results demonstrated that the polarization resistance value and the corrosion rate for different formulations including Mg-6Zn, Mg-6Zn-1GO, and Mg-6Zn-2GO were 41.58, 35.48, and 55.40 Ω.cm2 followed by 10.60, 14.83, and 9.06 mm.year−1, respectively. Based on the results, the Mg-6Zn-2GO formulation presented the best corrosion resistance among the samples were investigated, which confirmed the results of the immersion test. Moreover, the MTT assay proved that the extract of Mg-6Zn-2GO scaffolds was not cytotoxic in contact with L-929 cells which validated the studied scaffolds for bone tissue applications.

Recent advances in nano-scaffolds for tissue engineering applications: Toward natural therapeutics.

Among the promising methods for repairing or replacing tissue defects in the human body and the hottest research topics in medical science today are regenerative medicine and tissue engineering. On the other hand, nanotechnology has been expanded into different areas of regenerative medicine and tissue engineering due to its essential benefits in improving performance in various fields. Nanotechnology, a helpful strategy in tissue engineering, offers new solutions to unsolved problems. Especially considering the excellent physicochemical properties of nanoscale structures, their application in regenerative medicine has been gradually developed, and a lot of research has been conducted in this field. In this regard, various nanoscale structures, including nanofibers, nanosheets, nanofilms, nano-clays, hollow spheres, and different nanoparticles, have been developed to advance nanotechnology strategies with tissue repair goals. Here, we comprehensively review the application of the mentioned nanostructures in constructing nanocomposite scaffolds for regenerative medicine and tissue engineering. This article is categorized under: Nanotechnology Approaches to Biology > Nanoscale Systems in Biology Implantable Materials and Surgical Technologies > Nanotechnology in Tissue Repair and Replacement Diagnostic Tools > Biosensing.

Evaluation of innovative polyvinyl alcohol/ alginate/ green palladium nanoparticles composite scaffolds: Effect on differentiated human dental pulp stem cells into osteoblasts

Three-dimensional (3D) scaffolds are attracting great concern for bone tissue engineering applications. However, selecting an appropriate material with optimal physical, chemical, and mechanical properties is considered a great challenge. The green synthesis approach is essential to avoid the production of harmful by-products through textured construction, sustainable, and eco-friendly procedures. This work aimed at the implementation of natural green synthesized metallic nanoparticles for the development of composite scaffolds for dental applications. In this study, innovative hybrid scaffolds of polyvinyl alcohol/alginate (PVA/Alg) composite loaded with various concentrations of green palladium nanoparticles (Pd NPs) have been synthesized. Various characteristic analysis techniques were used to investigate the synthesized composite scaffold's properties. The SEM analysis revealed impressive microstructure of the synthesized scaffolds dependent on the Pd NPs concentration. The results confirmed the positive effect of Pd NPs doping on the sample stability over time. The synthesized scaffolds were characterized by the oriented lamellar porous structure. The results confirmed the shape stability, without pores breakdown during the drying process. The XRD analysis confirmed that doping with Pd NPs does not affect the crystallinity degree of the PVA/Alg hybrid scaffolds. The mechanical properties results (up to 50 MPa) confirmed the remarkable effect of Pd NPs doping and its concentration on the developed scaffolds. The MTT assay results showed that the incorporation of Pd NPs into the nanocomposite scaffolds is necessary for increasing cell viability. According to the SEM results, the scaffolds with Pd NPs provided the differentiated grown osteoblast cells with enough mechanical support and stability and the cells had a regular form and were highly dense. In conclusion, the synthesized composite scaffolds expressed suitable biodegradable, osteoconductive properties, and the ability to construct 3D structures for bone regeneration, making them a potential option for treating critical deficiencies of bone.

Recent Developments in Polymer Nanocomposites for Bone Regeneration.

Most people who suffer acute injuries in accidents have fractured bones. Many of the basic processes that take place during embryonic skeletal development are replicated throughout the regeneration process that occurs during this time. Bruises and bone fractures, for example, serve as excellent examples. It almost always results in a successful recovery and restoration of the structural integrity and strength of the broken bone. After a fracture, the body begins to regenerate bone. Bone formation is a complex physiological process that requires meticulous planning and execution. A normal healing procedure for a fracture might reveal how the bone is constantly rebuilding as an adult. Bone regeneration is becoming more dependent on polymer nanocomposites, which are composites made up of a polymer matrix and a nanomaterial. This study will review polymer nanocomposites that are employed in bone regeneration to stimulate bone regeneration. As a result, we will introduce the role of bone regeneration nanocomposite scaffolds, and the nanocomposite ceramics and biomaterials that play a role in bone regeneration. Aside from that, recent advances in polymer nanocomposites might be used in a variety of industrial processes to help people with bone defects overcome their challenges will be discussed.

Fabrication and characterization of a newly designed nanocomposite scaffold based on a gelatin network comprising multi-walled carbon nanotube and sodium montmorillonite nanoparticles

In this decade, the preparation of porous scaffold as a template resembling the extra-cellular matrix with the ability to induce bone-like apatite formation is highly demanded. In the present study, a newly designed nanocomposite scaffold based on a gelatin network comprising multi-walled carbon nanotube (CNT-COOH) and sodium montmorillonite nanoparticles (Na-Mt) was synthesized. The nanocomposite scaffolds were characterized by mechanical testing, porosity measurements FTIR, XRD, FESEM, and EDS. The inclusion of CNT-COOH and Na-Mt nanoparticles facilitated the deposition of Ca2+, CO32-, PO43- ions outside of the scaffolds after 14 days of soaking them in simulated body fluid (SBF). The highly porous scaffold with average pore size and mean porosity of 62.3 μm and 88.6 %, respectively exhibited 70.7 % swelling. By the introduction of the nanoparticles into the gelatin matrix, the mechanical properties of the composite scaffolds increased efficiently and contrarily their enzymatic degradation rate decreased. Elastic modulus and compressive strength of the introduced scaffold were reached 0.46 GPa and 3.71 MPa, respectively. In addition, the scaffold using NIR laser with different irradiation times showed high photothermal efficiency. Furthermore, cell cultures were carried out in the presence of in situ scaffold extracts and results revealed good biocompatibility of the scaffold without any cytotoxicity. Therefore, the prepared scaffolds with excellent microstructure, mechanical properties, biocompatibility, bone-like apatite mineralization capacity, and photothermal performance hold great potential for tissue engineering.

Fibrous electrospun polycaprolactone nanomat reinforced with halloysite nanotubes: Preparation and study of its potential application as tissue engineering scaffold

AbstractIn this work, the biocompatible and biodegradable polycaprolactone (PCL) was synthesized by a ring‐opening synthesis mechanism. To improve the mechanical and biological properties of the polymer, electrospun nanocomposite scaffolds were prepared using halloysite nanotubes (HNTs) as the reinforcing agent with the concentrations of 5, 10, 15, 20, and 25% (w/w) of PCL. PCL‐HNTs composites were prepared as fibrous nanomats by electrospinning method. The morphology and wettability of the electrospun PCL‐HNTs nanomats were investigated by scanning electron microscope images and water contact angel measurement and based on the structure of the fibers, fibers diameter and higher wettability, the PCL‐HNT composite containing 5% (w/w) of halloysite nanotubes (PCL + 5%HNTs) was selected as the proper composite and its application as tissue engineering scaffold was studied. The mechanical properties of the PCL + 5%HNTs composite was 2.6 times higher than that of PCL, as well as, comparatively higher thermal stability. To improve the antibacterial properties, HNTs were loaded with gentamycin sulfate (GM) prior to electrospinning and the PCl + 5%HNTs+GM composite were prepared and studied. The drug release profile showed that by the incorporation of HNTs into the PCL based composites, slow drug release was continued for 164 h, while neat HNTs were completed the drug release after 8 h. The GM loaded composite scaffold showed a high antibacterial effect for Staphylococcus aureus and Listeria monocytogenes, Escherichia coli. Adequate cell growth environment was provided by PCL + 5%HNTs, as indicated by the biocompatibility and protein adsorption test results. The hemolytic assay results showed a higher hemolysis value for the HNTs‐containing sample, but still lower than 5%.

3D printed poly(lactic acid)-based nanocomposite scaffolds with bioactive coatings for tissue engineering applications

In this work, the effect of two different types of bioactive coatings on the properties of 3D printed poly(lactic acid)/montmorillonite (PLA/MMT) nanocomposite scaffolds was examined. To improve their suitability for bone tissue engineering applications, the PLA nanocomposite scaffolds were coated with (i) ordered mesoporous Strontium bioglass (SrBG) and (ii) SrBG and nanohydroxyapatite (nHA) using a simple dip coating procedure. The effect of the coatings on the morphology, chemical structure, wettability and nanomechanical properties of the scaffolds was examined. The hydrophilicity of PLA nanocomposite scaffolds increased after the SrBG coating and increased even more with the SrBG/nHA coating. Moreover, in the case of PLA/MMT/SrBG/nHA 3D printed scaffolds, the elastic modulus increased by ~ 80% and the hardness increased from 156.9 ± 6.4 to 293.6 ± 11.3 MPa in comparison with PLA. Finally, the in vitro biocompatibility and osteogenic potential were evaluated using bone marrow-derived stem cells. The coating process was found to be a fast, economical and effective way to improve the biomineralization and promote the differentiation of the stem cells toward osteoblasts, in comparison with the neat PLA and the PLA/MMT nanocomposite scaffold.Graphical abstract

Design and development of biodegradable POSS-PCL-Zeolite (β) nano-scaffold for potential applications in bone regeneration

Side effects caused by bone fractures and restrictions on bone regeneration impose an enormous economic burden on the health system of society. To overcome these limitations, tissue engineering and cell-based therapies have been proposed as alternatives to induce and promote bone healing. Still, bone regeneration disadvantages, such as limited and painful surgery, the risk of infection, nerve injury, bleeding, and function damage, have led investigators to find an alternative therapy. In some studies, bone stimulants have prompted scientists to design scaffolds with appropriate physical structure with the possibility of cell adhesion and proliferation, which plays an influential role in the regeneration and repair of bone tissue. PCL nanofiber is an absorbing candidate for the formulation of biocompatible scaffolds used in tissue engineering. To overcome these negative aspects, improve the properties of PCL nanofibers, and based on the biocompatibility and superior mechanical properties of POSS, Polyhedral Oligomeric Silsesquioxane-Polycaprolactone-Zeolite (POSS-PCL-Zeolite) nanocomposite electrospun nanofiber scaffolds were fabricated in the present study. Nanohybrids and nanofibers structures were characterized by FTIR, HNMR, XRD, SEM, EDX, and DSC techniques. We used cellular and molecular assays, including DCFH ROS detection system, gene expression (RUNX-2, Osteocalcin, Nrf2, BAX, VEGF gens), and apoptotic to demonstrate the biocompatibility and induce bone differentiation of formulated POSS-PCL-Zeolite scaffolds. The results showed the biodegradability of POSS-PCL-Zeolite Nano-scaffold and supported the nesting of mesenchymal stem cells (MSCs) and induced bone differentiation by POSS-PCL-Zeolite Nano-scaffold.

Halloysite nanoclay reinforced hydroxyapatite porous scaffold for hard tissue regeneration

Hydroxyapatite (HAP), a natural constituent of bone tissue is commonly used for the clinical treatment of bone defects due to its similar structure with bone and excellent biocompatibility. However, the processing exertion, poor osteoinductive capability and poor mechanical strength of HAP needs further addressing for its immense implementation in tissue engineering. Different approaches have been reported to escalate the mechanical hardness and osteogenic potential of HAP. In the present work, halloysite nanoclay (HNC) and sericin protein were used for better mechanical and osteogenic properties, respectively. Halloysite nanoclay (HNC, 1.0–4.0%) was used to reinforce hydroxyapatite (HAP) and the mechanical strength of nanocomposite scaffolds were evaluated. After surface modification of nanocomposite scaffolds with 1.0% silk sericin protein; physical properties like microstructure, porosity, swelling ratio and degradation rate were evaluated. Cell morphology, cytocompatibility and alkaline phosphatase (ALP) activity were assessed using MG 63 osteoblast cell lines. HAP reinforced with 4% HNC (HAP@4) showed a significant increase (199 MPa) in young modulus as compared to pure HAP. HAP reinforced with 2% HNC (HAP@2) and 4% HNC (HAP@4) showed a significant decrease in porosity as well as degradation rate than pure HAP but no significant difference was observed in swelling ratio. The scanning electron microscope (SEM) images of the scaffolds showed porous architecture. Remarkably, the incorporation of HNC in HAP enhanced the cytocompatibility as well as ALP activity in comparison to pure HAP. Overall, these results suggested that halloysite nanoclay reinforced HAP scaffold could be an auspicious alternative for bone tissue regeneration.

Polymeric Nanocomposite Hydrogel Scaffolds in Craniofacial Bone Regeneration: A Comprehensive Review.

Nanocomposite biomaterials combine a biopolymeric matrix structure with nanoscale fillers. These bioactive and easily resorbable nanocomposites have been broadly divided into three groups, namely natural, synthetic or composite, based on the polymeric origin. Preparing such nanocomposite structures in the form of hydrogels can create a three-dimensional natural hydrophilic atmosphere pivotal for cell survival and new tissue formation. Thus, hydrogel-based cell distribution and drug administration have evolved as possible options for bone tissue engineering and regeneration. In this context, nanogels or nanohydrogels, created by cross-linking three-dimensional polymer networks, either physically or chemically, with high biocompatibility and mechanical properties were introduced as promising drug delivery systems. The present review highlights the potential of hydrogels and nanopolymers in the field of craniofacial tissue engineering and bone regeneration.

L-cysteine aided polyaniline capped SrO2 nanoceramics: Assessment of MC3T3-E1-arbitrated osteogenesis and anti-bactericidal efficacy on the polyurethane 2D nanofibrous substrate

Fabricating bioartificial bone graft ceramics retaining structural, mechanical, and bone induction properties akin to those of native stem-cell niches is a major challenge in the field of bone tissue engineering and regenerative medicine. Moreover, the developed materials are susceptible to microbial invasion leading to biomaterial-centered infections which might limit their clinical translation. Here, we successfully developed biomimetic porous scaffolds of polyurethane-reinforcedL-cysteine-anchored polyaniline capped strontium oxide nanoparticles to improve the scaffold’s biocompatibility, osteo-regeneration, mechanical, and antibacterial properties. The engineered nanocomposite substrate PU/L-Cyst-SrO2 @PANI (0.4 wt%) significantly promotes bone repair and regeneration by modulating osteolysis and osteogenesis. ALP activity, collagen-I, ARS staining, as well as biomineralization of MC3T3-E1 cells, were used to assess the biocompatibility and cytocompatibility of the developed scaffolds in vitro, confirming that the scaffold provided a favorable microenvironment with a prominent effect on cell growth, proliferation, and differentiation. Furthermore, osteogenic protein markers were studied using qRT-PCR with expression levels of runt-related transcription factor 2 (RUNX2), secreted phosphoprotein 1 (Spp-I), and collagen type I (Col-I). The overall results suggest that PU/L-Cyst-SrO2 @PANI (0.4 wt%) scaffolds showed superior interfacial biocompatibility, antibacterial properties, load-bearing ability, and osteoinductivity as compared to pristine PU. Thus, prepared bioactive nanocomposite scaffolds perform as a promising biomaterial substrate for bone tissue regeneration.

Dual-functionalized Pickering HIPE templated poly(ɛ-caprolactone) scaffold for maxillofacial implants

High internal phase emulsion (HIPE) templated poly (ɛ-caprolactone) (PCL) scaffolds have gained widespread attention for large-sized bone defects due to its tuneable 3D architecture and ease of fabricating crosslinked PCL (cPCL) scaffolds. However, extremely high stabilizer (surfactant or nanoparticle) concentration and negligence of microenvironment for regeneration sites like alveolar bones have restrained industrial acceptance of these scaffolds. Herein, we demonstrated the fabrication of nanocomposite cPCL scaffolds within Pickering HIPE templates stabilized using modified silica nanoparticles (mSiNP) concentrations as low as 0.1 to 1.0 wt%. Using an unconventional approach, the mSiNP Pickering stabilizer was added in dispersed phase, contradicting Bancroft’s rule. The colloidal stability was attained due to faster drifting of mSiNP towards the interface when it was dispersed in silicone oil. Scaffolds with tuneable properties were fabricated by controlling the mSiNP concentration and ϕd. Further, cPCL scaffolds were functionalized using clove oil (CO) to improve their efficiency in eradicating S. aureus and E. coli by disrupting their cellular integrity. Additionally, formation of biofilm on the surface of the scaffolds was successfully inhibited by the incorporation of CO. CO-functionalized scaffolds demonstrated excellent cytocompatibility towards MG-63 cells allowing their successful adhesion and proliferation on the surface of the scaffolds.

Diverse nanocomposites as a potential dressing for diabetic wound healing.

Wound healing is a programmed process of continuous events which is impaired in the case of diabetic patients. This impaired process of healing in diabetics leads to amputation, longer hospitalisation, immobilisation, low self-esteem, and mortality in some patients. This problem has paved the way for several innovative strategies like the use of nanotechnology for the treatment of wounds in diabetic patients. The use of biomaterials, nanomaterials have advanced approaches in tissue engineering by designing multi-functional nanocomposite scaffolds. Stimuli-responsive scaffolds that interact with the wound microenvironment and controlled release of bioactive molecules have helped in overcoming barriers in healing. The use of different types of nanocomposite scaffolds for faster healing of diabetic wounds is constantly being studied. Nanocomposites have helped in addressing specific issues with respect to healing and improving angiogenesis. Method: A literature search was followed to retrieve the articles on strategies for wound healing in diabetes across several databases like PubMed, EMBASE, Scopus and Cochrane database. The search was performed in May 2022 by two researchers independently. They keywords used were "diabetic wounds, nanotechnology, nanocomposites, nanoparticles, chronic diabetic wounds, diabetic foot ulcer, hydrogel". Exclusion criteria included insulin resistance, burn wound, dressing material.