N-heterocyclic Carbene Research Articles

A Doublet State Palladium(I) N-Heterocyclic Carbene Complex as a Dopant and Stabilizer for Improved Photostability in Organic Solar Cells

A Doublet State Palladium(I) N-Heterocyclic Carbene Complex as a Dopant and Stabilizer for Improved Photostability in Organic Solar Cells

Investigations of a Copper(II) Bipyridyl-N-Heterocyclic Carbene Macrocycle for CO2 Reduction: Apparent Formation of an Imidazolium Carboxylate Intermediate Leading to Demetalation.

A copper complex supported by a redox-active bipyridyl-N-heterocyclic carbene based ligand framework is reported. From X-ray crystallography, the tetradentate macrocycle provides a distorted square planar geometry around the copper metal center. The complex was investigated for the electrocatalytic CO2 reduction reaction (CO2RR) in acetonitrile solutions. Electronic structure calculations were performed on the complex and associated intermediates to provide a fundamental understanding of the metal-ligand redox chemistry and are compared to the previously reported nickel and cobalt analogues. Unlike its predecessors, which are active catalysts for the CO2RR, the copper complex decomposes under reducing conditions in the presence of CO2. A novel decomposition route involving coordination of CO2 to an N-heterocyclic carbene (NHC) donor of the macrocyclic ligand is proposed based on density functional theory (DFT) calculations, which is supported by isolation of a putative ligand-CO2 adduct from the electrolyzed solution and its characterization by 1H NMR spectroscopy and mass spectrometry. The noninnocent behavior of the NHC donors presented here may have important implications for the stability and reactivity of other complexes supported by N-heterocyclic carbenes, and further suggests that cooperative and productive pathways involving metal-bound NHCs could be exploited for CO2 reduction.

Diastereoselective Synthesis of Sulfoxide-Functionalized N-Heterocyclic Carbene Ruthenium Complexes: An Experimental and Computational Study.

The synthesis of sulfoxide-functionalized NHC ligand precursors were carried out by direct and mild oxidation from corresponding thioether precursors with high selectivity. Using these salts, a series of cationic [Ru(II)(η6-p-cymene)(NHC-SO)Cl]+ complexes were obtained in excellent yields by the classical Ag2O transmetallation route. NMR analyses suggested a chelate structure for the metal complexes, and X-ray diffractometry studies of complexes 4 b, 4 c, 4dBArF and 4 e unambiguously confirmed the preference for the bidentate (κ2-C,S) coordination mode of the NHC-SO ligands. Interestingly, only one diastereomer, in the form of an enantiomeric pair, was observed both in 1H NMR and in the solid state for the complexes. DFT calculations showed a possible intrinsic energy difference between the two pairs of diastereomer. The calculated energy barriers suggested that inversion of the sulfoxide is only plausible from the higher energy diastereomer together with bulky substituents. Inverting the configuration at the Ru center instead shows a lower and accessible activation barrier to provide the most stable diastereomer through thermodynamic control, consistent with the observation of a single species by 1H NMR as a pair of enantiomers. All these complexes catalyse the β-alkylation of secondary alcohols. Complex 4dPF6 bearing an NHC-functionalised S-Ad group has been further studied with different primary and secondary alcohols as substrates, showing high reactivity and high to moderate β-ol-selectivities.

Manganese Complexes with Consecutive Mn(IV) → Mn(III) Excitation for Versatile Photoredox Catalysis.

Manganese complexes stand out as promising candidates for photocatalyst design, attributed to their eco- and biocompatibility, versatile valence states, and capability for facilitating multiple electronic excitations. However, several intrinsic constraints, such as inadequate visible light response and short excited-state lifetimes, hinder effective photoinduced electron transfer and impede photoredox activation of substrates. To overcome this obstacle, we have developed a class of manganese complexes featuring boron-incorporated N-heterocyclic carbene ligands. These complexes enable prolonged excited-state durations encapsulating both Mn(IV) and Mn(III) oxidation stages, with lifetimes reaching microseconds for Mn(IV) and nanoseconds for Mn(III), concurrently exhibiting robust redox capabilities. They efficiently catalyze direct, site-selective cross-couplings between diverse arenes and aryl bromides, at a low catalyst loading of 0.5 mol %. Their proficiency spans an extensive array of substrates including both highly electron-rich and electron-deficient molecules, which underscore the superior performance of these manganese complexes in tackling intricate transformations. Furthermore, the versatility of these complexes is further highlighted by their successful applications in various photochemical transformations, encompassing reductive cross-couplings for the formation of C-P, C-B, C-S and C-Se bonds, alongside oxidative couplings for creating C-N bonds. This study sheds light on the distinctive photoredox properties and the remarkable catalytic flexibility of manganese complexes, highlighting their immense potential to drive progress in photochemical synthesis and green chemistry applications.

Hydrosilylation of Dihydrosilylium Ion Stabilized by Coordination of a σ‐Donating Ni(0) Ligand

AbstractThe hydrosilylation reactions of dihydrosilylium ion 2, stabilized by coordination of a σ‐donating Ni(0) fragment, has been investigated. Complex 2 with two reactive sites, dihydrosilylium and Ni(0) centers, readily reacts with diphenylacetylene via a selective mono‐hydrosilylation reaction to afford the corresponding Ni(0)‐stabilized (hydro)(vinyl)silylium ion 6. In the case of ethylene, three equivalents of olefin are consumed to give a cationic Ni(II)‐complex 7 featuring a Bu‐Si+‐NiII‐Et moiety with a NHC‐supported Si atom. DFT calculations indicate that the hydrosilylation proceeds by a classical (Chalk‐Harrod type) mechanism with the assistance of NHC ligand moving between Si and Ni centers according to their stabilization requirements.

Synthesis and Characterization of Symmetrical N-Heterocyclic Carbene Copper(II) Complexes-An Investigation of the Influence of Pyridinyl Substituents.

Three new tridentate copper(II) N-heterocyclic carbene (NHC) complexes have been obtained and characterized with symmetrical C-4 substitutions on their pendent pyridine rings. Substitutions including methyl (Me), methoxy (OMe), and chloro (Cl) groups, which extend the library pincer Cu-NHC complexes under investigation, modify the impact of pyridinyl basicity on NCN pincer complexes. Both ligand precursors and copper(II) complexes are characterized using a range of techniques, including nuclear magnetic resonance (NMR) spectroscopy for 1H, 13C, 31P, and 19F nuclei, electrospray ionization mass spectrometry (ESI-MS), X-ray crystallography, cyclic voltammetry, and UV-Vis spectroscopy. The pyridine substitutions lead to minimal changes to bond lengths and angles in the X-ray crystal structures of these related complexes; there is a pronounced impact on the electrochemical behavior of both the ligand precursors and copper complexes in the solution. The substitution in the pyridinyl units of these complexes show an impact on the catalytic reactivity of these complexes as applied to a model C-N bond-forming reaction (CEL cross-coupling) under well-established conditions; however, this observation does not correlate to the expected change in basicity in these ligands.

Pyrazine-bridged polymetallic copper-iridium clusters.

Single crystals of the mol-ecular compound, {Cu20Ir6Cl8(C21H24N2)6(C4H4N2)3]·3.18CH3OH or [({Cu10Ir3}Cl4(IMes)3(pyrazine))2(pyrazine)]·3.18CH3OH [where IMes is 1,3-bis-(2,4,6-trimethylphen-yl)imidazol-2-yl-idene], with a unique heterometallic cluster have been prepared and the structure revealed using single-crystal X-ray diffraction. The mol-ecule is centrosymmetric with two {Cu10Ir3} cores bridged by a pyrazine ligand. The polymetallic cluster contains three stabilizing N-heterocyclic carbenes, four Cl ligands, and a non-bridging pyrazine ligand. Notably, the Cu-Ir core is arranged in an unusual shape containing 13 vertices, 22 faces, and 32 sides. The atoms within the trideca-metallic cluster are arranged in four planes, with 2, 4, 4, 3 metals in each plane. Ir atoms are present in alternate planes with an Ir atom featuring in the peripheral bimetallic plane, and two Ir atoms featuring on opposite sides of the non-adjacent tetra-metallic plane. The crystal contains two disordered methanol solvent mol-ecules with an additional region of non-modelled electron density corrected for using the SQUEEZE routine in PLATON [Spek (2015 ▸). Acta Cryst. C71, 9-18]. The given chemical formula and other crystal data do not take into account the unmodelled methanol solvent mol-ecule(s).

N-Heterocyclic carbene catalytic 1,2-boron migrative acylation accelerated by photocatalysis.

The transformation of organoboron compounds plays an important role in synthetic chemistry, and recent advancements in boron-migration reactions have garnered considerable attention. Here, we report an unprecedented 1,2-boron migrative acylation upon photocatalysis-facilitated N-heterocyclic carbene catalysis. The design of a redox-active boronic ester substrate, serving as an excellent β-boron radical precursor, is the linchpin to the success of this chemistry. With the established protocol, a wide spectrum of β-boryl ketones has been rapidly synthesized, which could further undergo various C─B bond transformations to give multifunctionalized products. The robustness of this catalytic strategy is underscored by its successful application in late-stage modification of drug-derived molecules and natural products. Preliminary mechanistic investigations, including several control experiments, photochemistry measurements, and computational studies, shed light on the catalytic radical reaction mechanism.

Exploiting the Reversible Dimerization of N-Heterocyclic Carbenes to Access Dynamic Polymer Networks with an Organocatalytic Activity.

The capability of some N-heterocyclic carbenes (NHCs) to reversibly dimerize is exploited to access dynamic polymer networks. Benzimidazolium motifs serving as NHC precursors have thus been supported onto copolymer chains by reversible addition-fragmentation chain transfer (RAFT) copolymerization of styrene and up to 20 mol % of 4-vinylbenzyl-ethyl-benzimidazolium chloride. Molecular versions of 1,3-dialkyl benzimidazolium salts have been synthesized as models, the deprotonation of which with a strong base yields the NHC dimers in the form of tetraaminoalkenes. The crossover reaction between two distinct NHC homodimers, forming heterodimers, is then evidenced. Applying this deprotonation method to the RAFT-derived copolymers leads to polymer networks with cross-links consisting of labile dimerized NHC motifs. These networks can be subsequently decross-linked using two distinct triggers, namely, a monofunctional NHC precursor as competitor and carbon dioxide (CO2). In the latter case, regeneration of the network occurs by chemically fueling the linear copolymer bearing benzimidazolium motifs with tBuOK in the presence of trace amounts of water. The same networks can also be used as latent precursors of transient polyNHCs to catalyze the benzoin condensation upon heating. The polymer-supported organocatalysts can thus be used in successive catalytic cycles.

An unusual CAr^CNHC- and bidentate NAr^CNHC-cyclometalated Re(I)-NHC complexes with quinoline-functionalized ligands: Syntheses, structures, and blue-luminescent properties

An unusual CAr^CNHC-cyclometalated rhenium(I) tetracarbonyl complexes fac- (CAr^CNHC)Re(CO)4 (13) (the first report) and six NAr^CNHC-cyclometalated rhenium(I) tricarbonyl iodide/chloride complexes with quinoline-functionalized N-heterocyclic carbenes (NHC), fac-Re(CO)3(LNHC)I / fac-Re(CO)3(LNHC)Cl (LNHC = 1-(quinolin-8-yl)-3-methyl-1H-imidazol-2-ylidene (4, 10); 1-(quinolin-8-yl)-4-methyl-1H-1,2,4-triazoline-5-ylidene (5, 11); 1-(quinolin-8-yl)-3-benzyl-1H-imidazol-2-ylidene (6, 12) have been synthesized under controllable reaction conditions and characterized by their 1H NMR, 13C NMR, ESI–MS, IR spectra, and single-crystal X-ray diffraction analysis. X-ray crystallography revealed that the Re(I)-NHC complex 13 is a rare five-member bidentate CAr^CNHC-cyclometalated structure containing the coplanar system of quinoline and imidazole ring with a dihedral angle of 7.6°. The density functional theory (DFT) calculations also indicated that the blue shift of 50 nm for the MLCT absorption band of 13 is in good agreement with the coplanar five-member cyclometalated structure and the Re(I)-NHC complex 10 is a thermodynamic product. Seven Re(I)-NHC complexes exhibit photoluminescence emission in the blue region (410–470 nm) with relatively short decay lifetime on the nanosecond time scale, and high quantum yields of the Re(I)-NHC complexes 5 (Φ = 0.558) and 6 (Φ = 0.629) based-triazole were calculated by using [Ru(bpy)3](PF6)2 in degassed acetonitrile solution (Φstd = 0.062) as standard, due to the coordination of quinoline rings, NHC ligands to Re(I) center.

Enantioselective Relay Coupling of Perfluoroalkyl and Vinylogous Ketyl Radicals

Abstractβ‐Chiral carboxylic acids and their derivatives are highly valuable structural motifs in the fields of asymmetric synthesis and medicinal chemistry. However, the introduction of a sterically demanding sidechain to the β‐carbon, such as an all‐carbon quaternary center, remains a significant challenge in classical polar processes. Recently, N‐heterocyclic carbene (NHC) mediated coupling reactions involving persistent ketyl radicals have emerged as a promising strategy to assemble highly crowded carbon‐carbon bonds. Nevertheless, achieving enantioselectivity in these reactions remains highly challenging. In this work, we report our recent progress in controlling enantioselectivity for relay coupling of perfluoroalkyl and persistent vinylogous ketyl radicals. We developed a chiral bifunctional NHC‐squaramide catalyst that achieves high facial selectivity in a critical bond‐forming event involving the coupling of a congested tertiary carbon radical and vinylogous ketyl radical. Chiral carboxylates bearing an all‐carbon quaternary center at the β‐position can be prepared in good yield and excellent enantiomeric excess. Results from density functional theory (DFT) calculations and nuclear Overhauser effect (NOE) experiments indicate that the N,N’‐diaryl squaramide motif adopts an unusual syn‐syn conformation, enabling hydrogen bonding interactions with the enolate oxygen, thereby rigidifying the overall conformation of the transition state.

Enantioselective Relay Coupling of Perfluoroalkyl and Vinylogous Ketyl Radicals.

β-Chiral carboxylic acids and their derivatives are highly valuable structural motifs in the fields of asymmetric synthesis and medicinal chemistry. However, the introduction of a sterically demanding sidechain to the β-carbon, such as an all-carbon quaternary center, remains a significant challenge in classical polar processes. Recently, N-heterocyclic carbene (NHC) mediated coupling reactions involving persistent ketyl radicals have emerged as a promising strategy to assemble highly crowded carbon-carbon bonds. Nevertheless, achieving enantioselectivity in these reactions remains highly challenging. In this work, we report our recent progress in controlling enantioselectivity for relay coupling of perfluoroalkyl and persistent vinylogous ketyl radicals. We developed a chiral bifunctional NHC-squaramide catalyst that achieves high facial selectivity in a critical bond-forming event involving the coupling of a congested tertiary carbon radical and vinylogous ketyl radical. Chiral carboxylates bearing an all-carbon quaternary center at the β-position can be prepared in good yield and excellent enantiomeric excess. Results from density functional theory (DFT) calculations and nuclear Overhauser effect (NOE) experiments indicate that the N,N'-diaryl squaramide motif adopts an unusual syn-syn conformation, enabling hydrogen bonding interactions with the enolate oxygen, thereby rigidifying the overall conformation of the transition state.

Chlorido-[(1,2,5,6-η)-cyclo-octa-1,5-diene](1-ethyl-4-isobutyl-1,2,4-triazol-5-yl-idene)rhodium(I).

A new neutral triazole-based N-heterocyclic carbene rhodium(I) complex [RhCl(C8H12)(C8H15N3)], has been synthesized and structurally characterized. The complex crystallizes with two mol-ecules in the asymmetric unit. The central rhodium(I) atom has a distorted square-planar coordination environment, formed by a cyclo-octa-1,5-diene (COD) ligand, an N-heterocyclic carbene (NHC) ligand, and a chlorido ligand. The bond lengths are unexceptional. A weak inter-molecular non-standard hydrogen-bonding inter-action exists between the chlorido and NHC ligands.

Aggregation-Induced Emission Phosphorescence Featured Au-Ag Coordination Polymer with a Diphosphine N-Heterocyclic Carbene Ligand for Highly Sensitive Detection of Cr(VI).

Luminescent materials with aggregation-induced emission (AIE) characteristics have been recognized as highly selective and sensitive probes for the detection of toxic metal ions in recent years. In this paper, a Au-Ag cluster-based coordination polymer [Au3Ag3(L)2(CN)6(H2O)2]n [1, L = 1,3-bis((diphenylphosphanyl)methyl)-4,5-dihydro-imidazolylidene] was prepared by in situ generation of the diphosphine N-heterocyclic carbene (PCNHCP)-type ligand L in the presence of the corresponding metal salts. Compound 1 exhibited 530 nm phosphorescence under 380 nm excitation with a QY of 6.30% and a lifetime (τ) of 7.14 μs in the solid state. 1 showed good AIE behavior in the mixture of MeOH/H2O while the best aggregation state (fwater = 90%, QY = 6.79%, τ = 6.70 μs) exhibited selective and sensitive emission quenching toward Cr(VI) ions. Ultralow detection limits of 9.7 ppb (w/w) for Cr2O72- and 17.9 ppb (w/w) for CrO42- were achieved.

Phosphine versus Carbene Metal Interactions: Bond Energies.

A variety of different ground-state structures of carbene and phosphine groups 1 and 2 cationic, group 11 cationic, and group 10 neutral complexes were studied using density functional theory (DFT) and correlated molecular orbital theory (CCSD(T)) methods. Geometries of complexes with phosphines were studied and compared to available experimental data. Among the three analyzed phosphine ligands, PH3, PMe3, and PPh3, PH3 was found to have noticeably smaller ligand binding energies (LBEs, ΔH298 K). PPh3 has the greatest LBEs with group 2 dications. The difference in LBEs for PMe3 and PPh3 in complexes with group 1 monocations and transition-metal (TM) complexes was significantly less pronounced. The stability and reactivity of phosphine complexes were analyzed and compared with those of previously studied N-heterocyclic carbenes (NHC). PH3 has smaller LBEs compared to NHC carbenes. The lower LBEs correlate with the hardness for M(11)+ complexes and correlate with both the hardness and ionic radii for the M(1)+ and M(2)2+ complexes. The presence of additional PH3 substituents on the metal center makes the LBE smaller compared to their unsubstituted or less substituted analogs. The presence of NH3 in a structure causes a smaller effect on binding, and, except for carbene-PtNH3, an increase in LBE was observed. Composite-correlated molecular orbital theory (G3MP2) was used to predict the LBE of various Lewis acidic ligands with PH3 and NHCs to contrast their binding behavior. Binding either phosphine or carbene to metal diamine complexes caused ligand exchange and transfer of NH3 to an outer coordination sphere.

Crystalline Radical Anion of a Diboratriazole and Its Conversion to a Neutral Radical Driven by a Carbene.

One-electron reduction of diboratriazole 1 with potassium graphite (KC8) generates the radical anion 1•-•K+, which undergoes a salt (KCl) elimination reaction upon addition of an N-heterocyclic carbene (NHC) to afford the neutral diboratriazole radical 3. An X-ray diffraction analysis, electron paramagnetic resonance spectroscopy, and computational studies revealed that an unpaired electron in radical species 1•-•K+ and 3 is delocalized over the π-system of the B2N3 and carbene rings. Reversible oxidation of 3 gives rise to a diboratriazole cation 4 featuring a 6π aromatic character. Moreover, treating 1•-•K+ with a half equivalent of a bis(NHC) produces a biradical species 5, in which there is little interaction between two radical moieties separated by the bis(NHC) linker, suggesting the dis-biradical property. 5 undergoes stepwise and reversible two-electron oxidation, establishing three formal oxidation states.

Synthesis, luminescence properties and computation studies of two-coordinate N-heterocyclic carbene (NHC) copper(I) complexes bearing quinoline derivatives as ligands

Here, we report a series of two-coordinate N-heterocyclic carbene (NHC) copper(I) complexes having monodenate NHC 1,3-bis(2,6- diisopropylphenyl)imidazol-2-ylidene) (IPr) as a σ donor and quinoline and its derivatives as π-chromophore ligands, [Cu(IPr)(Quinoline)]BF4 (P1), [Cu(IPr)(Chloroquinoline)]BF4 (P2), [Cu(IPr)(Phenylquinoline)]BF4 (P3), and [Cu(IPr)(Aminoquinoline)]BF4 (P4), (Chloroquinoline = 2,4-dichloroquinoline, Phenylquinoline = 2-phenylquinoline, Aminoquinoline = 2,4-diaminequinoline). The X-ray diffraction studies of P1 and P3 revealed the linear coordination around the copper atom. P1 and P2 exhibit the typical metal-to-ligand charge transfer (1MLCT) absorption bands in the lowest-lying energy region, while P3 and P4 show the mixed characters of ligand-to-ligand charge transfer (1LLCT) and π→π* transition. The emission wavelengths of all NHCCu(I) complexes can be fine-tuned to cover the spectral range of 419–543 nm with the main 3(π-π) emission origin in the solid state. The differences for photophysical properties of NHCCu(I) complexes were rationalized using density functional theory (DFT) and time dependent density functional theory (TDDFT) calculations.

Synthesis and reactivity of an N-heterocyclic carbene-stabilized diazoborane.

Diazo compounds and organic azides are widely used as reagents for accessing valuable molecules in multiple areas of fundamental and applied chemistry. Their capacity to undergo versatile chemical transformations arises from the reactive nature of an incipient dinitrogen molecule at the terminal position. In this work, we report the synthesis and characterization of an N-heterocyclic carbene (NHC)-stabilized diazoborane-a boron-centered analog of organic azides and diazoalkanes. The diazoborane displays a strong tendency to release dinitrogen, thus serving as a borylene source, in analogy to organic azides and diazoalkanes serving as nitrene and carbene sources, respectively. Also reminiscent of diazoalkane and organic azide reactivity, the diazoborane serves as a 1,3-dipole that undergoes uncatalyzed [3+2] cycloaddition with an unactivated terminal alkyne, affording a five-membered heterocycle after a two-step rearrangement.

AIE-active N-heterocyclic carbene Cu(I) complexes: Stimuli-responsive with hypsochromic or bathochromic mechanochromic phosphorescence through switchable C–H⋅⋅⋅F interactions

Three four-coordinate NHC(N-heterocyclic carbene)-Cu(I) complexes, denoted as P1, P2, and P3, have been synthesized and thoroughly characterized, each featuring unique substituents on the NHC ligand. Notably, P1, P2, and P3 exhibit aggregation-induced emission (AIE) behavior, with their solid forms displaying diverse phosphorescent properties. Additionally, the solid-state phosphorescence of these complexes can be modulated by external mechanical stimuli. Remarkably, P2 and P3 demonstrate reversible hypsochromic mechanochromic phosphorescence (MCP) responses, whereas P1 displays reversible bathochromic MCP characteristics. The observed MCP phenomena in P1 and P2 are primarily attributed to the disruption of C–H⋅⋅⋅F hydrogen bonds caused by mechanical grinding. This claim is supported by X-ray single-crystal analysis and FT-IR spectroscopy.

Iridium(III) complexes with cyclometalated imidazolylidene ligands: sp2 phenyl C[sbnd]H activation vs sp2 benzyl C[sbnd]H activation and catalytic transfer hydrogenation reactions

Cyclometalated N-heterocyclic carbene (NHC) complexes possess fascinating electronic and catalytic properties. A series of cyclometalated iridium(III) complexes have been synthesized from the corresponding imidazolium salts via the aryl sp2 CH bond activation at the N1-phenyl/N3-benzyl wingtips of the imidazolylidene moiety. The electronic tuning towards the competitive formation of cyclometalated complexes (sp2 phenyl CH activation vs sp2 benzyl CH activation) has been discussed. These complexes have been utilized for the transfer hydrogenation (TH) reaction of 4-bromobenzaldehyde and 4-bromoacetophenone. These complexes showed excellent yields of the aryl-alcohols from 4-bromobenzaldehyde or 4-bromoacetophenone.